Fixed hwmod data for pcie by having the correct module mode offset.
Previously this module mode offset was part of pcie PHY which was wrong.
Now this module mode offset was moved to pcie hwmod and removed the hwmod data
for pcie phy. While at that renamed pcie_hwmod to pciess_hwmod in order
to match with the name given in TRM.

This helps to get rid of the following warning
"omap_hwmod: pcie1: _wait_target_disable failed"

[Grygorii.Strashko@linaro.org: Found the issue that actually caused
 "omap_hwmod: pcie1: _wait_target_disable failed"]
Signed-off-by: NGrygorii Strashko <Grygorii.Strashko@linaro.org>
Signed-off-by: NKishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: NPaul Walmsley <paul@pwsan.com>

With commit '7dedd346: ARM: OMAP2+: hwmod: Fix a crash in _setup_reset()
with DEBUG_LL' we moved from parsing cmdline to identify uart used
for earlycon to using the requsite hwmod CONFIG_DEBUG_OMAPxUARTy FLAGS.

On DRA7 UART3 hwmod doesn't have this flag enabled, and atleast on
BeagleBoard-X15, where we use UART3 for console, boot fails with
DEBUG_LL enabled. Enable DEBUG_OMAP4UART3_FLAGS for UART3 hwmod.

For using DEBUG_LL, enable CONFIG_DEBUG_OMAP4UART3 in menuconfig.

Fixes: 90020c7b ("ARM: OMAP: DRA7: hwmod: Create initial DRA7XX SoC data")
Cc: <stable@vger.kernel.org> # v3.12+
Reviewed-by: NFelipe Balbi <balbi@ti.com>
Acked-by: NFelipe Balbi <balbi@ti.com>
Signed-off-by: NLokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: NPaul Walmsley <paul@pwsan.com>

This patch fixes: 'omap_hwmod: gpmc: _wait_target_disable failed'
error during suspend.

This is because smart idle is broken.
Tested in dra7-evm D1 board.
Signed-off-by: NKeerthy <j-keerthy@ti.com>
Signed-off-by: NPaul Walmsley <paul@pwsan.com>

- omap mmc driver supports multiplexing, omap_mmc_hs doesn't
this leads to one of the major confusions in the omap_hsmmc driver

- platform data should be read-only for the driver
most callbacks are not set by the omap3 platform init code while still
required. So they are set from the driver probe function, which is against
the paradigm that platform-data should not be modified by the driver
typical examples are card_detect, read_only callbacks

un-bundling by searching for driver name \"omap_hsmmc in the
arch/arm folder. omap_hsmmc_platform_data is not initialized directly,
but from omap2_hsmmc_info, which is defined in a separate header file
not touched by this patch

hwmod includes platform headers to declare features of the platform. All
the declared features are prefixed OMAP_HSMMC. There is no need to
include platform header from hwmod other except for feature defines
Acked-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NAndreas Fenkart <afenkart@gmail.com>
Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org>

Only a few files really need that platform header. When later splitting
omap_mmc_platform_data into omap_mmc and omap_mmc_hs, those files
declaring an hs mmc platform data will have to change the platform
include, which is a good sanity check.
Also removing omap242x_init_mmc, which is not used anywhere, checked
with grep.
Signed-off-by: NAndreas Fenkart <afenkart@gmail.com>
Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org>

We had constrainted hwmod entries to entries in dts which were present
only for default mapped interrupts, the ones such as UARTs > 6 which
needed IRQ crossbar configured were never added to hwmod database.

Add them now that IRQ crossbar is functional

Without this, enabling UARTs7 to 10 in dts results in the following crash:
[    1.893829] omap_uart 48420000.serial: _od_fail_runtime_resume: FIXME: missing hwmod/omap_dev info
[    1.903381] Unhandled fault: imprecise external abort (0x1406) at 0x00000000
[    1.903381] ------------[ cut here ]------------
[    1.903381] WARNING: CPU: 0 PID: 0 at drivers/bus/omap_l3_noc.c:147 l3_interrupt_handler+0x2ac/0x32c()
[    1.903411] 44000000.ocp:L3 Custom Error: MASTER MPU TARGET L4_PER2_P3 (Read): Data Access in User mode during Functional access
[    1.903411] Modules linked in:
[    1.903411] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G        W      3.18.0-rc1-dirty #3
[    1.903442] [<c0015270>] (unwind_backtrace) from [<c00119b4>] (show_stack+0x10/0x14)
[    1.903442] [<c00119b4>] (show_stack) from [<c05e4afc>] (dump_stack+0x78/0x94)
[    1.903472] [<c05e4afc>] (dump_stack) from [<c003fed0>] (warn_slowpath_common+0x6c/0x8c)
[    1.903472] [<c003fed0>] (warn_slowpath_common) from [<c003ff84>] (warn_slowpath_fmt+0x30/0x40)
[    1.903472] [<c003ff84>] (warn_slowpath_fmt) from [<c0333bfc>] (l3_interrupt_handler+0x2ac/0x32c)
[    1.903503] [<c0333bfc>] (l3_interrupt_handler) from [<c008d6f8>] (handle_irq_event_percpu+0x60/0x230)
[    1.903503] [<c008d6f8>] (handle_irq_event_percpu) from [<c008d904>] (handle_irq_event+0x3c/0x5c)
[    1.903503] [<c008d904>] (handle_irq_event) from [<c00903b0>] (handle_fasteoi_irq+0xc4/0x190)
[    1.903503] [<c00903b0>] (handle_fasteoi_irq) from [<c008d01c>] (generic_handle_irq+0x20/0x30)
[    1.903533] [<c008d01c>] (generic_handle_irq) from [<c008d114>] (__handle_domain_irq+0x64/0xb8)
[    1.903533] [<c008d114>] (__handle_domain_irq) from [<c00086e4>] (gic_handle_irq+0x20/0x60)
[    1.903533] [<c00086e4>] (gic_handle_irq) from [<c05eb124>] (__irq_svc+0x44/0x5c)
[    1.903533] Exception stack(0xc08d1f60 to 0xc08d1fa8)
[    1.903564] 1f60: 00000001 00000001 00000000 c08dc930 c08d0000 00000000 00000000 00000000
[    1.903564] 1f80: ffffffed c0978028 c08d89dc c08d8978 00000000 c08d1fa8 c0083fc0 c000f160
[    1.903564] 1fa0: 20000013 ffffffff
[    1.903564] [<c05eb124>] (__irq_svc) from [<c000f160>] (arch_cpu_idle+0x20/0x3c)
[    1.903594] [<c000f160>] (arch_cpu_idle) from [<c0077c54>] (cpu_startup_entry+0x198/0x338)
[    1.903594] [<c0077c54>] (cpu_startup_entry) from [<c0869be0>] (start_kernel+0x358/0x3c4)
[    1.903594] [<c0869be0>] (start_kernel) from [<80008074>] (0x80008074)
[    1.903594] ---[ end trace 293fc95d463cff71 ]---
[    2.117553] Internal error: : 1406 [#1] SMP ARM
[    2.122314] Modules linked in:
[    2.125518] CPU: 1 PID: 1 Comm: swapper/0 Tainted: G        W      3.18.0-rc1-dirty #3
[    2.133850] task: ed868b80 ti: ed86a000 task.ti: ed86a000
[    2.139526] PC is at serial_omap_probe+0x2fc/0x514
[    2.144561] LR is at trace_hardirqs_on_caller+0xec/0x1c4
[    2.150146] pc : [<c038f0f0>]    lr : [<c0083fc0>]    psr: 40000013
[    2.150146] sp : ed86be18  ip : ed9bb57c  fp : f005e000
[    2.162231] r10: 0000012a  r9 : ed9b4f80  r8 : edc5bdcd
[    2.167724] r7 : edc58810  r6 : ed9bb400  r5 : ed9bb410  r4 : edc5bc10
[    2.174560] r3 : 00000000  r2 : 00000000  r1 : 00000014  r0 : ffffffed
[    2.181427] Flags: nZcv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment kernel
[    2.189117] Control: 10c5387d  Table: 8000406a  DAC: 00000015
[    2.195159] Process swapper/0 (pid: 1, stack limit = 0xed86a248)
[    2.201477] Stack: (0xed86be18 to 0xed86c000)
[    2.206054] be00:                                                       ed9ba2d0 00000000
[    2.214660] be20: edc50150 00000001 c08cba58 00000000 00000000 ed9bb410 ffffffed c09481d8
[    2.223236] be40: 00000000 c09481d8 c08cba58 00000000 00000000 c039bcfc c1170958 ed9bb410
[    2.231842] be60: ed9bb444 c039a6f4 00000000 ed9bb410 c09481d8 ed9bb444 00000000 c08dc698
[    2.240447] be80: edc4a100 c039a8b0 c09481d8 c039a81c 00000000 c0399060 ed8afaa8 ed92c110
[    2.249053] bea0: c09481d8 edc482c0 c0949308 c0399ee0 c077f80c c09481d8 ed86a000 c09481d8
[    2.257659] bec0: ed86a000 c08dc698 00000000 c039b088 00000000 00000000 ed86a000 c08a1924
[    2.266235] bee0: c08a1904 c00089c4 00000000 00000000 00000000 00000000 60000093 00000000
[    2.274841] bf00: 00000004 00000000 ed868b80 00000004 00000000 60000053 00000000 00000001
[    2.283447] bf20: 00000000 c0083ea8 00000001 ed86a000 c08334bc ef7fc307 000000b2 c0059358
[    2.292053] bf40: c07e176c c083299c 00000006 00000006 c08cb588 c08b69cc 00000006 c08b69ac
[    2.300659] bf60: c097a280 000000b2 c08cba58 c0869588 00000000 c0869e04 00000006 00000006
[    2.309234] bf80: c0869588 00000000 00000000 c05dfd7c 00000000 00000000 00000000 00000000
[    2.317840] bfa0: 00000000 c05dfd84 00000000 c000e668 00000000 00000000 00000000 00000000
[    2.326446] bfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[    2.335052] bfe0: 00000000 00000000 00000000 00000000 00000013 00000000 020405d0 00090c40
[    2.343658] [<c038f0f0>] (serial_omap_probe) from [<c039bcfc>] (platform_drv_probe+0x48/0x98)
[    2.352630] [<c039bcfc>] (platform_drv_probe) from [<c039a6f4>] (driver_probe_device+0x10c/0x234)
[    2.361968] [<c039a6f4>] (driver_probe_device) from [<c039a8b0>] (__driver_attach+0x94/0x98)
[    2.370819] [<c039a8b0>] (__driver_attach) from [<c0399060>] (bus_for_each_dev+0x54/0x88)
[    2.379425] [<c0399060>] (bus_for_each_dev) from [<c0399ee0>] (bus_add_driver+0xdc/0x1d4)
[    2.388031] [<c0399ee0>] (bus_add_driver) from [<c039b088>] (driver_register+0x78/0xf4)
[    2.396453] [<c039b088>] (driver_register) from [<c08a1924>] (serial_omap_init+0x20/0x40)
[    2.405059] [<c08a1924>] (serial_omap_init) from [<c00089c4>] (do_one_initcall+0x80/0x1cc)
[    2.413757] [<c00089c4>] (do_one_initcall) from [<c0869e04>] (kernel_init_freeable+0x1b8/0x28c)
[    2.422912] [<c0869e04>] (kernel_init_freeable) from [<c05dfd84>] (kernel_init+0x8/0xe4)
[    2.431396] [<c05dfd84>] (kernel_init) from [<c000e668>] (ret_from_fork+0x14/0x2c)
[    2.439361] Code: e1b02f23 020320f0 0203300f 01a02222 (0a000021)
[    2.445770] ---[ end trace 293fc95d463cff72 ]---
[    2.450683] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
[    2.450683]
[    2.460296] CPU0: stopping
[    2.463134] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G      D W      3.18.0-rc1-dirty #3
[    2.471405] [<c0015270>] (unwind_backtrace) from [<c00119b4>] (show_stack+0x10/0x14)
[    2.479522] [<c00119b4>] (show_stack) from [<c05e4afc>] (dump_stack+0x78/0x94)
[    2.487060] [<c05e4afc>] (dump_stack) from [<c001394c>] (handle_IPI+0x190/0x264)
[    2.494781] [<c001394c>] (handle_IPI) from [<c000871c>] (gic_handle_irq+0x58/0x60)
[    2.502716] [<c000871c>] (gic_handle_irq) from [<c05eb124>] (__irq_svc+0x44/0x5c)
[    2.510528] Exception stack(0xc08d1f60 to 0xc08d1fa8)
[    2.515808] 1f60: c000f15c 00000000 00000000 00000000 c08d0000 00000000 00000000 00000000
[    2.524353] 1f80: ffffffed c0978028 c08d89dc c08d8978 00000000 c08d1fa8 c000f15c c000f160
[    2.532897] 1fa0: 60000013 ffffffff
[    2.536529] [<c05eb124>] (__irq_svc) from [<c000f160>] (arch_cpu_idle+0x20/0x3c)
[    2.544281] [<c000f160>] (arch_cpu_idle) from [<c0077c54>] (cpu_startup_entry+0x198/0x338)
[    2.552917] [<c0077c54>] (cpu_startup_entry) from [<c0869be0>] (start_kernel+0x358/0x3c4)
[    2.561462] [<c0869be0>] (start_kernel) from [<80008074>] (0x80008074)
[    2.568298] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
[
Reported-by: NFranklin Cooper Jr. <fcooper@ti.com>
Signed-off-by: NNishanth Menon <nm@ti.com>
Signed-off-by: NAmbresh K <ambresh@ti.com>
Signed-off-by: NPaul Walmsley <paul@pwsan.com>

To deal with IPs which are specific to dra74x and dra72x, maintain seperate
ocp interface lists, while keeping the common list for all common IPs.

Move USB OTG SS4 to dra74x only list since its unavailable in
dra72x and is giving an abort during boot. The dra72x only list
is empty for now and a placeholder for future hwmod additions which
are specific to dra72x.

Fixes: d904b38d ("ARM: DRA7: hwmod: Add SYSCONFIG for usb_otg_ss")
Reported-by: NKeerthy <j-keerthy@ti.com>
Signed-off-by: NRajendra Nayak <rnayak@ti.com>
Signed-off-by: NLokesh Vutla <lokeshvutla@ti.com>
Tested-by: NNishanth Menon <nm@ti.com>
[paul@pwsan.com: fixed comment style to conform with CodingStyle]
Signed-off-by: NPaul Walmsley <paul@pwsan.com>

Add hwmod data for RTC
Signed-off-by: NLokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: NSekhar Nori <nsekhar@ti.com>
Reviewed-by: NRajendra Nayak <rnayak@ti.com>
[paul@pwsan.com: updated to apply]
Signed-off-by: NPaul Walmsley <paul@pwsan.com>

Adding hwmod data for CPSW and MDIO which is present in DRA7xx SoC

Cc: Rajendra Nayak <rnayak@ti.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Paul Walmsley <paul@pwsan.com>
Signed-off-by: NMugunthan V N <mugunthanvnm@ti.com>
Tested-by: NSebastian Andrzej Siewior <sebastian@breakpoint.cc>
Acked-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NPaul Walmsley <paul@pwsan.com>

Added hwmod data for pcie1 and pcie2 subsystem present in DRA7xx SOC.

Cc: Tony Lindgren <tony@atomide.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Paul Walmsley <paul@pwsan.com>
Signed-off-by: NKishon Vijay Abraham I <kishon@ti.com>
Tested-by: NKishon Vijay Abraham I <kishon@ti.com>
Reviewed-by: NRajendra Nayak <rnayak@ti.com>
Signed-off-by: NPaul Walmsley <paul@pwsan.com>

Added hwmod data for pcie1 and pcie2 phy present in DRA7xx SOC.
Also added the missing CLKCTRL OFFSET macro and CONTEXT OFFSET macro
for pcie1 phy and pcie2 phy.

Cc: Tony Lindgren <tony@atomide.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Paul Walmsley <paul@pwsan.com>
Signed-off-by: NKishon Vijay Abraham I <kishon@ti.com>
Tested-by: NKishon Vijay Abraham I <kishon@ti.com>
Reviewed-by: NRajendra Nayak <rnayak@ti.com>
Signed-off-by: NPaul Walmsley <paul@pwsan.com>

This module is needed for the SATA and PCIe PHYs.
Signed-off-by: NRoger Quadros <rogerq@ti.com>
Reviewed-by: NRajendra Nayak <rnayak@ti.com>
Tested-by: NSekhar Nori <nsekhar@ti.com>
Signed-off-by: NPaul Walmsley <paul@pwsan.com>

DMA interrupts are now available in of, and the definitions are
duplicates in hwmod. This prevents us from dynamically allocating
interrupt resources for dma from devicetree.
Signed-off-by: NNishanth Menon <nm@ti.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>

Add the hwmod data for the 13 instances of the system mailbox
IP in DRA7 SoC. The patch is needed for performing a soft-reset
while configuring the respective mailbox instance, otherwise is
a non-essential change for functionality. The modules are smart
idled on reset, and the IP module mode is hardware controlled.

Cc: Rajendra Nayak <rnayak@ti.com>
Cc: Paul Walmsley <paul@pwsan.com>
Signed-off-by: NSuman Anna <s-anna@ti.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>

Add the sysconfig class bits for the Super Speed USB
controllers
Signed-off-by: NRoger Quadros <rogerq@ti.com>
Reviewed-by: NRajendra Nayak <rnayak@ti.com>
Tested-by: NSekhar Nori <nsekhar@ti.com>
Signed-off-by: NPaul Walmsley <paul@pwsan.com>

Get rid of optional clock as that is now managed by the
AHCI platform driver.

Correct .mpu_rt_idx to 1 as the module register space (SYSCONFIG..)
is passed as the second memory resource in the device tree.
Signed-off-by: NRoger Quadros <rogerq@ti.com>
Reviewed-by: NRajendra Nayak <rnayak@ti.com>
Tested-by: NSekhar Nori <nsekhar@ti.com>
Signed-off-by: NPaul Walmsley <paul@pwsan.com>

Add nodes for the Super Speed USB controllers, omap-control-usb,
USB2 PHY and USB3 PHY devices.

Remove ocp2scp1 address space from hwmod data as it is
now provided via device tree.

CC: Benoît Cousson <bcousson@baylibre.com>
Reviewed-by: NFelipe Balbi <balbi@ti.com>
Signed-off-by: NRoger Quadros <rogerq@ti.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>

The spinlock module's SYSCONFIG register on DRA7xx does not
support smart wakeup, and also does not have the CLKACTIVITY
field. The sysc data for spinlock module has been appropriately
fixed up to reflect the same.

Cc: Ambresh K <ambresh@ti.com>
Signed-off-by: NSuman Anna <s-anna@ti.com>
Signed-off-by: NPaul Walmsley <paul@pwsan.com>

With commit '7dedd346: ARM: OMAP2+: hwmod: Fix a crash in _setup_reset() with
 DEBUG_LL' we moved from parsing cmdline to identify uart used for earlycon
to using the requsite hwmod CONFIG_DEBUG_OMAPxUARTy FLAGS.

On DRA7 though, we seem to be missing this flag, and atleast on the DRA7 EVM
where we use uart1 for console, boot fails with DEBUG_LL enabled.
Reported-by: NLokesh Vutla <lokeshvutla@ti.com>
Tested-by:  Lokesh Vutla <lokeshvutla@ti.com> # on a different base
Signed-off-by: NRajendra Nayak <rnayak@ti.com>
Fixes: 7dedd346 ("ARM: OMAP2+: hwmod: Fix a crash in _setup_reset() with DEBUG_LL")
Signed-off-by: NPaul Walmsley <paul@pwsan.com>

Adding the hwmod data for DRA7XX platforms.
Signed-off-by: NAmbresh K <ambresh@ti.com>
Signed-off-by: NTero Kristo <t-kristo@ti.com>
Signed-off-by: NRajendra Nayak <rnayak@ti.com>
Signed-off-by: NPaul Walmsley <paul@pwsan.com>