This creates a new arch/powerpc/kernel/setup-common.c with various
bits that setup_32.c and setup_64.c had in common - functions like
machine_shutdown/restart/power_off, show_cpuinfo, set_preferred_console
etc.
Signed-off-by: NPaul Mackerras <paulus@samba.org>

This splits arch/ppc64/kernel/rtas.c into arch/powerpc/kernel/rtas.c,
which contains generic RTAS functions useful on any CHRP platform,
and arch/powerpc/platforms/pseries/rtas-fw.[ch], which contain
some pSeries-specific firmware flashing bits.  The parts of rtas.c
that are to do with pSeries-specific error logging are protected
by a new CONFIG_RTAS_ERROR_LOGGING symbol.  The inclusion of rtas.o
is controlled by the CONFIG_PPC_RTAS symbol, and the relevant
platforms select that.
Signed-off-by: NPaul Mackerras <paulus@samba.org>

This changes the parameters for i8259_init so that it takes two
parameters: a physical address for generating an interrupt
acknowledge cycle, and an interrupt number offset.  i8259_init
now sets the irq_desc[] for its interrupts; all the callers
were doing this, and that code is gone now.  This also defines
a CONFIG_PPC_I8259 symbol to select i8259.o for inclusion, and
makes the platforms that need it select that symbol.
Signed-off-by: NPaul Mackerras <paulus@samba.org>

This defines a CONFIG_INDIRECT_PCI symbol to control whether it
gets used or not, and fixes the Kconfig to select that symbol for
platforms that need it.
Signed-off-by: NPaul Mackerras <paulus@samba.org>

ras.o is only built for CONFIG_PPC_PSERIES, so move it into
arch/powerpc/platforms/pseries. Update Makefiles to suit.
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Move firmware.h into include/asm-powerpc.
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

GCC 3.3.3 barfs on the trailing \n" in the HMT macros.
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Somewhere along the line we got two definitions of set_tb(). They look to
be identical although they're not textually identical. So remove the #ifdef
CONFIG_PPC64 version, leaving the common version in time.h.
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

* Removed of_show_percpuinfo and just report CPU frequency in generic
  show_cpuinfo code.
* Killed OCP and PPC_SYS related code which doesn't belong in the
  merge tree
Signed-off-by: NKumar K. Gala <kumar.gala@freescale.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

We need to initialize some control SPRS for timers on Book-E before
we start taking decrementer interrupts.
Signed-off-by: NKumar K. Gala <kumar.gala@freescale.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

A recent patch updated the name of pci_assign_all_busses to
pci_assign_all_buses.  This instance of its use wasn't corrected
by the original patch to use the new name.

Builds cleanly on ads8272.
Signed-off-by: NBecky Bruce <becky.bruce@freescale.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Powerpc: Fix types.h

I noticed that Paul had already pulled the version of types.h that
is missing the config.h include into the merge tree - this patch adds
it back in.
Signed-off-by: NBecky Bruce <becky.bruce@freescale.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Signed-off-by: NKumar Gala <kumar.gala@freescale.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

On !CONFIG_PPC_MULTIPLATFORM _machine is defined as 0.  This is ok, but
we can't assign a value to _machine then.

We may not have CONFIG_PCI available, so only build in support for
find_parent_pci_resource(), request_OF_resource(), release_OF_resource()
if PCI is enabled.  This is probably not the long term fix but works out
for now.

Make reg_property64 contain 64-bit elements on a 32-bit machine.

Mark the deprecated prom.c functions as __deprecated.
Signed-off-by: NKumar K. Gala <kumar.gala@freescale.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Its valid for ppc_md.set_rtc_time to be NULL.  We need to check
that its non-NULL before trying to update the RTC.
Signed-off-by: NKumar K. Gala <kumar.gala@freescale.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Add a shutdown member to struct vio_driver. We also need vio_bus_shutdown()
which converts from struct device to struct vio_dev and knows how to extract
the struct vio_driver.

Original patch adjusted for different location of vio.c.
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>

Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>

A comment in lpevents.c refers to code that's actually in HvCallEvent.h.
The code in HvCallEvent.h is pretty obvious, so just remove the comment
altogether.
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>
Acked-by: NStephen Rothwell <sfr@canb.auug.org.au>

Just set the name field directly in the device_driver structure
contained in the vio_driver struct.
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>

Move include/asm-ppc64/vio.h to include/asm-powerpc/vio.h, that's it.
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>

Merge arch/ppc64/kernel/vio.c into arch/powerpc/kernel/vio.c, update
the Makefiles to make it work, and make ARCH=ppc64 still work.

Michael's version put vio.c in arch/powerpc/sysedv but after consolting
Paulus, this one puts it in arch/powerpc/kernel.
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>

Previously it claimed 7MB starting at the 9M point and loaded the
kernel there.  That meant that prom_init put the flattened device
tree above 16M.  On the 601 that caused the early device tree scan
to fail, since only 16MB are mapped with BATs on the 601.  Moving
this down to 8MB allows prom_init to put the flattened device tree
between 15M and 16M, so it works on the 601.
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Old powermacs have a number of differences from current machines:
- there is no interrupt tree in the device tree, just interrupt
  or AAPL,interrupt properties
- the chosen node in the device tree is called /chosen@0
- the OF claim method doesn't map the memory, so we have to do
  an explicit map call as well
- there is no /chosen/cpu property on SMP machines
- the NVRAM isn't structured as a set of partitions.

This adapts the merged powermac support code to cope with these
issues.
Signed-off-by: NPaul Mackerras <paulus@samba.org>

The 601 doesn't have the timebase register; instead it has an RTCL
register that counts nanoseconds and wraps at 1000000000, and an
RTCU register that counts seconds.  This makes the necessary changes
for the merged time code to use the RTCL/U registers when the kernel
is running on a 601.
Signed-off-by: NPaul Mackerras <paulus@samba.org>

This switches the ARCH=ppc64 build to use arch/powerpc/platforms/powermac
instead of arch/ppc64/kernel/pmac*, and deletes the latter set of files.
Signed-off-by: NPaul Mackerras <paulus@samba.org>

This brings in a lot of changes from arch/ppc64/kernel/pmac_*.c to
arch/powerpc/platforms/powermac/*.c and makes various minor tweaks
elsewhere.  On the powermac we now initialize ppc_md by copying
the whole pmac_md structure into it, which required some changes in
the ordering of initializations of individual fields of it.
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Previously it ignored the return value from ppc_md.set_rtc_time,
but in fact the functions that that can point to do return a
useful error code, so return it from set_rtc_time().
Signed-off-by: NPaul Mackerras <paulus@samba.org>

... for consistency with ppc32, and because this way is neater.
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Moved init_boot_display from arch/ppc64/kernel/pmac_setup.c to
arch/ppc64/kernel/btext.c and declared it in asm-ppc64/btext.h.
Call it from init_early rather than pmac_init_early.
Signed-off-by: NPaul Mackerras <paulus@samba.org>

... for consistency with ppc32 and to make the powermac merge easier.
Also make it use just a single resource in the host bridge for multiple
consecutive elements of the ranges property.
Signed-off-by: NPaul Mackerras <paulus@samba.org>

This moves smp_space_timers from arch/ppc64/kernel/smp.c to
arch/powerpc/kernel/time.c and makes it initialize last_jiffy[]
instead of paca[].next_jiffy_update_tb, since last_jiffy[] is
now what the time code uses.  It also declares smp_space_timers
in include/asm-powerpc/time.h and gets rid of an ifdef in
div128_by_32.
Signed-off-by: NPaul Mackerras <paulus@samba.org>

An error in merging led to 32-bit processes getting the wrong link
register value on entry to RT signal handlers, and the wrong stack
chain as well.  This fixes it.
Signed-off-by: NPaul Mackerras <paulus@samba.org>

... instead of exporting it in arch/*/kernel/ppc_ksyms.c.
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Not sure how it slipped by, but here's a trivial typo fix for powernow.
Signed-off-by: NChris Wright <chrisw@osdl.org>
[ It's "nurter" backwards.. Maybe we have a hillbilly The Shining fan? ]
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

When I originally moved exit_itimers into __exit_signal, that was the only
place where we could reliably know it was the last thread in the group
dying, without races.  Since then we've gotten the signal_struct.live
counter, and do_exit can reliably do group-wide cleanup work.

This patch moves the call to do_exit, where it's made without locks.  This
avoids the deadlock issues that the old __exit_signal code's comment talks
about, and the one that Oleg found recently with process CPU timers.

[ This replaces e03d13e9, which is why
  it was just reverted. ]
Signed-off-by: NRoland McGrath <roland@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Revert commit e03d13e9, to be replaced
by a much nicer fix from Roland.

AMD recently discovered that on some hardware, there is a race condition
possible when a C-state change request goes onto the bus at the same
time as a P-state change request.

Both requests happen, but the southbridge hardware only acknowledges the
C-state change.  The PowerNow! driver is then stuck in a loop, waiting
for the P-state change acknowledgement.  The driver eventually times
out, but can no longer perform P-state changes.

It turns out the solution is to resend the P-state change, which the
southbridge will acknowledge normally.

Thanks to Johannes Winkelmann for reporting this and testing the fix.
Signed-off-by: NMark Langsdorf <mark.langsdorf@amd.com>
Signed-off-by: NDave Jones <davej@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This fixes a stupid typo bug in the iSeries hash table code.

When we place a hash PTE in the secondary bucket, instead of setting the
SECONDARY flag bit, as we should, we (redundantly) set the VALID flag.

This was introduced with the patch abolishing bitfields from the hash
table code.  Mea culpa, oops.  It hasn't been noticed until now because
in practice we don't hit the secondary bucket terribly often.
Signed-off-by: NDavid Gibson <dwg@au1.ibm.com>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>