Skip to content

cloud-kernel
cloud-kernel

openanolis / cloud-kernel
接近 2 年 前同步成功

通知 170
Star 36
Fork 7
cloud-kernel
cloud-kernel
提交 83428944 编写于 作者: P Paul Mackerras
浏览文件
操作

ppc64: Use arch/powerpc/platforms/powermac for powermac build. 

This switches the ARCH=ppc64 build to use arch/powerpc/platforms/powermac
instead of arch/ppc64/kernel/pmac*, and deletes the latter set of files.
Signed-off-by: NPaul Mackerras <paulus@samba.org>
上级 35499c01
展开全部 隐藏空白更改
内联 并排
Showing with 6 addition and 3581 deletion
arch/powerpc/platforms/Makefile
浏览文件 @ 83428944
ifeq ($(CONFIG_PPC_MERGE),y)
obj-$(CONFIG_PPC_PMAC) += powermac/
else
ifeq ($(CONFIG_PPC64),y)
obj-$(CONFIG_PPC_PMAC) += powermac/
endif
endif
obj-$(CONFIG_4xx) += 4xx/
obj-$(CONFIG_85xx) += 85xx/
......
arch/ppc64/kernel/Makefile
浏览文件 @ 83428944
......@@ -56,11 +56,7 @@ obj-$(CONFIG_HVCS) += hvcserver.o
obj-$(CONFIG_IBMVIO) += vio.o
obj-$(CONFIG_XICS) += xics.o
ifneq ($(CONFIG_PPC_MERGE),y)
obj-$(CONFIG_PPC_PMAC) += pmac_setup.o pmac_feature.o pmac_pci.o \
pmac_time.o pmac_nvram.o pmac_low_i2c.o \
udbg_scc.o
endif
obj-$(CONFIG_PPC_PMAC) += udbg_scc.o
obj-$(CONFIG_PPC_MAPLE) += maple_setup.o maple_pci.o maple_time.o \
udbg_16550.o
......@@ -68,9 +64,7 @@ obj-$(CONFIG_PPC_MAPLE) += maple_setup.o maple_pci.o maple_time.o \
obj-$(CONFIG_U3_DART) += u3_iommu.o
ifdef CONFIG_SMP
ifneq ($(CONFIG_PPC_MERGE),y)
obj-$(CONFIG_PPC_PMAC) += pmac_smp.o smp-tbsync.o
endif
obj-$(CONFIG_PPC_PMAC) += smp-tbsync.o
obj-$(CONFIG_PPC_MAPLE) += smp-tbsync.o
endif
......
arch/ppc64/kernel/pmac.h 已删除 100644 → 0
浏览文件 @ 35499c01
#ifndef __PMAC_H__
#define __PMAC_H__
#include <linux/pci.h>
#include <linux/ide.h>
/*
* Declaration for the various functions exported by the
* pmac_* files. Mostly for use by pmac_setup
*/
extern unsigned long pmac_get_boot_time(void);
extern void pmac_get_rtc_time(struct rtc_time *tm);
extern int pmac_set_rtc_time(struct rtc_time *tm);
extern void pmac_read_rtc_time(void);
extern void pmac_calibrate_decr(void);
extern void pmac_pcibios_fixup(void);
extern void pmac_pci_init(void);
extern void pmac_setup_pci_dma(void);
extern void pmac_check_ht_link(void);
extern void pmac_setup_smp(void);
extern unsigned long pmac_ide_get_base(int index);
extern void pmac_ide_init_hwif_ports(hw_regs_t *hw,
unsigned long data_port, unsigned long ctrl_port, int *irq);
extern void pmac_nvram_init(void);
#endif /* __PMAC_H__ */
arch/ppc64/kernel/pmac_feature.c 已删除 100644 → 0
浏览文件 @ 35499c01
/*
* arch/ppc/platforms/pmac_feature.c
*
* Copyright (C) 1996-2001 Paul Mackerras (paulus@cs.anu.edu.au)
* Ben. Herrenschmidt (benh@kernel.crashing.org)
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*
* TODO:
*
* - Replace mdelay with some schedule loop if possible
* - Shorten some obfuscated delays on some routines (like modem
* power)
* - Refcount some clocks (see darwin)
* - Split split split...
*
*/
#include <linux/config.h>
#include <linux/types.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/spinlock.h>
#include <linux/adb.h>
#include <linux/pmu.h>
#include <linux/ioport.h>
#include <linux/pci.h>
#include <asm/sections.h>
#include <asm/errno.h>
#include <asm/keylargo.h>
#include <asm/uninorth.h>
#include <asm/io.h>
#include <asm/prom.h>
#include <asm/machdep.h>
#include <asm/pmac_feature.h>
#include <asm/dbdma.h>
#include <asm/pci-bridge.h>
#include <asm/pmac_low_i2c.h>
#undef DEBUG_FEATURE
#ifdef DEBUG_FEATURE
#define DBG(fmt...) printk(KERN_DEBUG fmt)
#else
#define DBG(fmt...)
#endif
/*
* We use a single global lock to protect accesses. Each driver has
* to take care of its own locking
*/
static DEFINE_SPINLOCK(feature_lock);
#define LOCK(flags) spin_lock_irqsave(&feature_lock, flags);
#define UNLOCK(flags) spin_unlock_irqrestore(&feature_lock, flags);
/*
* Instance of some macio stuffs
*/
struct macio_chip macio_chips[MAX_MACIO_CHIPS] ;
struct macio_chip* macio_find(struct device_node* child, int type)
{
while(child) {
int i;
for (i=0; i < MAX_MACIO_CHIPS && macio_chips[i].of_node; i++)
if (child == macio_chips[i].of_node &&
(!type || macio_chips[i].type == type))
return &macio_chips[i];
child = child->parent;
}
return NULL;
}
EXPORT_SYMBOL_GPL(macio_find);
static const char* macio_names[] =
{
"Unknown",
"Grand Central",
"OHare",
"OHareII",
"Heathrow",
"Gatwick",
"Paddington",
"Keylargo",
"Pangea",
"Intrepid",
"K2"
};
/*
* Uninorth reg. access. Note that Uni-N regs are big endian
*/
#define UN_REG(r) (uninorth_base + ((r) >> 2))
#define UN_IN(r) (in_be32(UN_REG(r)))
#define UN_OUT(r,v) (out_be32(UN_REG(r), (v)))
#define UN_BIS(r,v) (UN_OUT((r), UN_IN(r) | (v)))
#define UN_BIC(r,v) (UN_OUT((r), UN_IN(r) & ~(v)))
static struct device_node* uninorth_node;
static u32* uninorth_base;
static u32 uninorth_rev;
static void *u3_ht;
extern struct device_node *k2_skiplist[2];
/*
* For each motherboard family, we have a table of functions pointers
* that handle the various features.
*/
typedef long (*feature_call)(struct device_node* node, long param, long value);
struct feature_table_entry {
unsigned int selector;
feature_call function;
};
struct pmac_mb_def
{
const char* model_string;
const char* model_name;
int model_id;
struct feature_table_entry* features;
unsigned long board_flags;
};
static struct pmac_mb_def pmac_mb;
/*
* Here are the chip specific feature functions
*/
static long g5_read_gpio(struct device_node* node, long param, long value)
{
struct macio_chip* macio = &macio_chips[0];
return MACIO_IN8(param);
}
static long g5_write_gpio(struct device_node* node, long param, long value)
{
struct macio_chip* macio = &macio_chips[0];
MACIO_OUT8(param, (u8)(value & 0xff));
return 0;
}
static long g5_gmac_enable(struct device_node* node, long param, long value)
{
struct macio_chip* macio = &macio_chips[0];
unsigned long flags;
if (node == NULL)
return -ENODEV;
LOCK(flags);
if (value) {
MACIO_BIS(KEYLARGO_FCR1, K2_FCR1_GMAC_CLK_ENABLE);
mb();
k2_skiplist[0] = NULL;
} else {
k2_skiplist[0] = node;
mb();
MACIO_BIC(KEYLARGO_FCR1, K2_FCR1_GMAC_CLK_ENABLE);
}
UNLOCK(flags);
mdelay(1);
return 0;
}
static long g5_fw_enable(struct device_node* node, long param, long value)
{
struct macio_chip* macio = &macio_chips[0];
unsigned long flags;
if (node == NULL)
return -ENODEV;
LOCK(flags);
if (value) {
MACIO_BIS(KEYLARGO_FCR1, K2_FCR1_FW_CLK_ENABLE);
mb();
k2_skiplist[1] = NULL;
} else {
k2_skiplist[1] = node;
mb();
MACIO_BIC(KEYLARGO_FCR1, K2_FCR1_FW_CLK_ENABLE);
}
UNLOCK(flags);
mdelay(1);
return 0;
}
static long g5_mpic_enable(struct device_node* node, long param, long value)
{
unsigned long flags;
if (node->parent == NULL || strcmp(node->parent->name, "u3"))
return 0;
LOCK(flags);
UN_BIS(U3_TOGGLE_REG, U3_MPIC_RESET | U3_MPIC_OUTPUT_ENABLE);
UNLOCK(flags);
return 0;
}
static long g5_eth_phy_reset(struct device_node* node, long param, long value)
{
struct macio_chip* macio = &macio_chips[0];
struct device_node *phy;
int need_reset;
/*
* We must not reset the combo PHYs, only the BCM5221 found in
* the iMac G5.
*/
phy = of_get_next_child(node, NULL);
if (!phy)
return -ENODEV;
need_reset = device_is_compatible(phy, "B5221");
of_node_put(phy);
if (!need_reset)
return 0;
/* PHY reset is GPIO 29, not in device-tree unfortunately */
MACIO_OUT8(K2_GPIO_EXTINT_0 + 29,
KEYLARGO_GPIO_OUTPUT_ENABLE | KEYLARGO_GPIO_OUTOUT_DATA);
/* Thankfully, this is now always called at a time when we can
* schedule by sungem.
*/
msleep(10);
MACIO_OUT8(K2_GPIO_EXTINT_0 + 29, 0);
return 0;
}
static long g5_i2s_enable(struct device_node *node, long param, long value)
{
/* Very crude implementation for now */
struct macio_chip* macio = &macio_chips[0];
unsigned long flags;
if (value == 0)
return 0; /* don't disable yet */
LOCK(flags);
MACIO_BIS(KEYLARGO_FCR3, KL3_CLK45_ENABLE | KL3_CLK49_ENABLE |
KL3_I2S0_CLK18_ENABLE);
udelay(10);
MACIO_BIS(KEYLARGO_FCR1, K2_FCR1_I2S0_CELL_ENABLE |
K2_FCR1_I2S0_CLK_ENABLE_BIT | K2_FCR1_I2S0_ENABLE);
udelay(10);
MACIO_BIC(KEYLARGO_FCR1, K2_FCR1_I2S0_RESET);
UNLOCK(flags);
udelay(10);
return 0;
}
#ifdef CONFIG_SMP
static long g5_reset_cpu(struct device_node* node, long param, long value)
{
unsigned int reset_io = 0;
unsigned long flags;
struct macio_chip* macio;
struct device_node* np;
macio = &macio_chips[0];
if (macio->type != macio_keylargo2)
return -ENODEV;
np = find_path_device("/cpus");
if (np == NULL)
return -ENODEV;
for (np = np->child; np != NULL; np = np->sibling) {
u32* num = (u32 *)get_property(np, "reg", NULL);
u32* rst = (u32 *)get_property(np, "soft-reset", NULL);
if (num == NULL || rst == NULL)
continue;
if (param == *num) {
reset_io = *rst;
break;
}
}
if (np == NULL || reset_io == 0)
return -ENODEV;
LOCK(flags);
MACIO_OUT8(reset_io, KEYLARGO_GPIO_OUTPUT_ENABLE);
(void)MACIO_IN8(reset_io);
udelay(1);
MACIO_OUT8(reset_io, 0);
(void)MACIO_IN8(reset_io);
UNLOCK(flags);
return 0;
}
#endif /* CONFIG_SMP */
/*
* This can be called from pmac_smp so isn't static
*
* This takes the second CPU off the bus on dual CPU machines
* running UP
*/
void g5_phy_disable_cpu1(void)
{
UN_OUT(U3_API_PHY_CONFIG_1, 0);
}
static long generic_get_mb_info(struct device_node* node, long param, long value)
{
switch(param) {
case PMAC_MB_INFO_MODEL:
return pmac_mb.model_id;
case PMAC_MB_INFO_FLAGS:
return pmac_mb.board_flags;
case PMAC_MB_INFO_NAME:
/* hack hack hack... but should work */
*((const char **)value) = pmac_mb.model_name;
return 0;
}
return -EINVAL;
}
/*
* Table definitions
*/
/* Used on any machine
*/
static struct feature_table_entry any_features[] = {
{ PMAC_FTR_GET_MB_INFO, generic_get_mb_info },
{ 0, NULL }
};
/* G5 features
*/
static struct feature_table_entry g5_features[] = {
{ PMAC_FTR_GMAC_ENABLE, g5_gmac_enable },
{ PMAC_FTR_1394_ENABLE, g5_fw_enable },
{ PMAC_FTR_ENABLE_MPIC, g5_mpic_enable },
{ PMAC_FTR_READ_GPIO, g5_read_gpio },
{ PMAC_FTR_WRITE_GPIO, g5_write_gpio },
{ PMAC_FTR_GMAC_PHY_RESET, g5_eth_phy_reset },
{ PMAC_FTR_SOUND_CHIP_ENABLE, g5_i2s_enable },
#ifdef CONFIG_SMP
{ PMAC_FTR_RESET_CPU, g5_reset_cpu },
#endif /* CONFIG_SMP */
{ 0, NULL }
};
static struct pmac_mb_def pmac_mb_defs[] = {
{ "PowerMac7,2", "PowerMac G5",
PMAC_TYPE_POWERMAC_G5, g5_features,
0,
},
{ "PowerMac7,3", "PowerMac G5",
PMAC_TYPE_POWERMAC_G5, g5_features,
0,
},
{ "PowerMac8,1", "iMac G5",
PMAC_TYPE_IMAC_G5, g5_features,
0,
},
{ "PowerMac9,1", "PowerMac G5",
PMAC_TYPE_POWERMAC_G5_U3L, g5_features,
0,
},
{ "RackMac3,1", "XServe G5",
PMAC_TYPE_XSERVE_G5, g5_features,
0,
},
};
/*
* The toplevel feature_call callback
*/
long pmac_do_feature_call(unsigned int selector, ...)
{
struct device_node* node;
long param, value;
int i;
feature_call func = NULL;
va_list args;
if (pmac_mb.features)
for (i=0; pmac_mb.features[i].function; i++)
if (pmac_mb.features[i].selector == selector) {
func = pmac_mb.features[i].function;
break;
}
if (!func)
for (i=0; any_features[i].function; i++)
if (any_features[i].selector == selector) {
func = any_features[i].function;
break;
}
if (!func)
return -ENODEV;
va_start(args, selector);
node = (struct device_node*)va_arg(args, void*);
param = va_arg(args, long);
value = va_arg(args, long);
va_end(args);
return func(node, param, value);
}
static int __init probe_motherboard(void)
{
int i;
struct macio_chip* macio = &macio_chips[0];
const char* model = NULL;
struct device_node *dt;
/* Lookup known motherboard type in device-tree. First try an
* exact match on the "model" property, then try a "compatible"
* match is none is found.
*/
dt = find_devices("device-tree");
if (dt != NULL)
model = (const char *) get_property(dt, "model", NULL);
for(i=0; model && i<(sizeof(pmac_mb_defs)/sizeof(struct pmac_mb_def)); i++) {
if (strcmp(model, pmac_mb_defs[i].model_string) == 0) {
pmac_mb = pmac_mb_defs[i];
goto found;
}
}
for(i=0; i<(sizeof(pmac_mb_defs)/sizeof(struct pmac_mb_def)); i++) {
if (machine_is_compatible(pmac_mb_defs[i].model_string)) {
pmac_mb = pmac_mb_defs[i];
goto found;
}
}
/* Fallback to selection depending on mac-io chip type */
switch(macio->type) {
case macio_keylargo2:
pmac_mb.model_id = PMAC_TYPE_UNKNOWN_K2;
pmac_mb.model_name = "Unknown K2-based";
pmac_mb.features = g5_features;
default:
return -ENODEV;
}
found:
/* Check for "mobile" machine */
if (model && (strncmp(model, "PowerBook", 9) == 0
|| strncmp(model, "iBook", 5) == 0))
pmac_mb.board_flags |= PMAC_MB_MOBILE;
printk(KERN_INFO "PowerMac motherboard: %s\n", pmac_mb.model_name);
return 0;
}
/* Initialize the Core99 UniNorth host bridge and memory controller
*/
static void __init probe_uninorth(void)
{
uninorth_node = of_find_node_by_name(NULL, "u3");
if (uninorth_node && uninorth_node->n_addrs > 0) {
/* Small hack until I figure out if parsing in prom.c is correct. I should
* get rid of those pre-parsed junk anyway
*/
unsigned long address = uninorth_node->addrs[0].address;
uninorth_base = ioremap(address, 0x40000);
uninorth_rev = in_be32(UN_REG(UNI_N_VERSION));
u3_ht = ioremap(address + U3_HT_CONFIG_BASE, 0x1000);
} else
uninorth_node = NULL;
if (!uninorth_node)
return;
printk(KERN_INFO "Found U3 memory controller & host bridge, revision: %d\n",
uninorth_rev);
printk(KERN_INFO "Mapped at 0x%08lx\n", (unsigned long)uninorth_base);
}
static void __init probe_one_macio(const char* name, const char* compat, int type)
{
struct device_node* node;
int i;
volatile u32* base;
u32* revp;
node = find_devices(name);
if (!node || !node->n_addrs)
return;
if (compat)
do {
if (device_is_compatible(node, compat))
break;
node = node->next;
} while (node);
if (!node)
return;
for(i=0; i<MAX_MACIO_CHIPS; i++) {
if (!macio_chips[i].of_node)
break;
if (macio_chips[i].of_node == node)
return;
}
if (i >= MAX_MACIO_CHIPS) {
printk(KERN_ERR "pmac_feature: Please increase MAX_MACIO_CHIPS !\n");
printk(KERN_ERR "pmac_feature: %s skipped\n", node->full_name);
return;
}
base = (volatile u32*)ioremap(node->addrs[0].address, node->addrs[0].size);
if (!base) {
printk(KERN_ERR "pmac_feature: Can't map mac-io chip !\n");
return;
}
if (type == macio_keylargo) {
u32* did = (u32 *)get_property(node, "device-id", NULL);
if (*did == 0x00000025)
type = macio_pangea;
if (*did == 0x0000003e)
type = macio_intrepid;
}
macio_chips[i].of_node = node;
macio_chips[i].type = type;
macio_chips[i].base = base;
macio_chips[i].flags = MACIO_FLAG_SCCB_ON | MACIO_FLAG_SCCB_ON;
macio_chips[i].name = macio_names[type];
revp = (u32 *)get_property(node, "revision-id", NULL);
if (revp)
macio_chips[i].rev = *revp;
printk(KERN_INFO "Found a %s mac-io controller, rev: %d, mapped at 0x%p\n",
macio_names[type], macio_chips[i].rev, macio_chips[i].base);
}
static int __init
probe_macios(void)
{
probe_one_macio("mac-io", "K2-Keylargo", macio_keylargo2);
macio_chips[0].lbus.index = 0;
macio_chips[1].lbus.index = 1;
return (macio_chips[0].of_node == NULL) ? -ENODEV : 0;
}
static void __init
set_initial_features(void)
{
struct device_node *np;
if (macio_chips[0].type == macio_keylargo2) {
#ifndef CONFIG_SMP
/* On SMP machines running UP, we have the second CPU eating
* bus cycles. We need to take it off the bus. This is done
* from pmac_smp for SMP kernels running on one CPU
*/
np = of_find_node_by_type(NULL, "cpu");
if (np != NULL)
np = of_find_node_by_type(np, "cpu");
if (np != NULL) {
g5_phy_disable_cpu1();
of_node_put(np);
}
#endif /* CONFIG_SMP */
/* Enable GMAC for now for PCI probing. It will be disabled
* later on after PCI probe
*/
np = of_find_node_by_name(NULL, "ethernet");
while(np) {
if (device_is_compatible(np, "K2-GMAC"))
g5_gmac_enable(np, 0, 1);
np = of_find_node_by_name(np, "ethernet");
}
/* Enable FW before PCI probe. Will be disabled later on
* Note: We should have a batter way to check that we are
* dealing with uninorth internal cell and not a PCI cell
* on the external PCI. The code below works though.
*/
np = of_find_node_by_name(NULL, "firewire");
while(np) {
if (device_is_compatible(np, "pci106b,5811")) {
macio_chips[0].flags |= MACIO_FLAG_FW_SUPPORTED;
g5_fw_enable(np, 0, 1);
}
np = of_find_node_by_name(np, "firewire");
}
}
}
void __init
pmac_feature_init(void)
{
/* Detect the UniNorth memory controller */
probe_uninorth();
/* Probe mac-io controllers */
if (probe_macios()) {
printk(KERN_WARNING "No mac-io chip found\n");
return;
}
/* Setup low-level i2c stuffs */
pmac_init_low_i2c();
/* Probe machine type */
if (probe_motherboard())
printk(KERN_WARNING "Unknown PowerMac !\n");
/* Set some initial features (turn off some chips that will
* be later turned on)
*/
set_initial_features();
}
int __init pmac_feature_late_init(void)
{
#if 0
struct device_node* np;
/* Request some resources late */
if (uninorth_node)
request_OF_resource(uninorth_node, 0, NULL);
np = find_devices("hammerhead");
if (np)
request_OF_resource(np, 0, NULL);
np = find_devices("interrupt-controller");
if (np)
request_OF_resource(np, 0, NULL);
#endif
return 0;
}
device_initcall(pmac_feature_late_init);
#if 0
static void dump_HT_speeds(char *name, u32 cfg, u32 frq)
{
int freqs[16] = { 200,300,400,500,600,800,1000,0,0,0,0,0,0,0,0,0 };
int bits[8] = { 8,16,0,32,2,4,0,0 };
int freq = (frq >> 8) & 0xf;
if (freqs[freq] == 0)
printk("%s: Unknown HT link frequency %x\n", name, freq);
else
printk("%s: %d MHz on main link, (%d in / %d out) bits width\n",
name, freqs[freq],
bits[(cfg >> 28) & 0x7], bits[(cfg >> 24) & 0x7]);
}
#endif
void __init pmac_check_ht_link(void)
{
#if 0 /* Disabled for now */
u32 ufreq, freq, ucfg, cfg;
struct device_node *pcix_node;
struct pci_dn *pdn;
u8 px_bus, px_devfn;
struct pci_controller *px_hose;
(void)in_be32(u3_ht + U3_HT_LINK_COMMAND);
ucfg = cfg = in_be32(u3_ht + U3_HT_LINK_CONFIG);
ufreq = freq = in_be32(u3_ht + U3_HT_LINK_FREQ);
dump_HT_speeds("U3 HyperTransport", cfg, freq);
pcix_node = of_find_compatible_node(NULL, "pci", "pci-x");
if (pcix_node == NULL) {
printk("No PCI-X bridge found\n");
return;
}
pdn = pcix_node->data;
px_hose = pdn->phb;
px_bus = pdn->busno;
px_devfn = pdn->devfn;
early_read_config_dword(px_hose, px_bus, px_devfn, 0xc4, &cfg);
early_read_config_dword(px_hose, px_bus, px_devfn, 0xcc, &freq);
dump_HT_speeds("PCI-X HT Uplink", cfg, freq);
early_read_config_dword(px_hose, px_bus, px_devfn, 0xc8, &cfg);
early_read_config_dword(px_hose, px_bus, px_devfn, 0xd0, &freq);
dump_HT_speeds("PCI-X HT Downlink", cfg, freq);
#endif
}
/*
* Early video resume hook
*/
static void (*pmac_early_vresume_proc)(void *data);
static void *pmac_early_vresume_data;
void pmac_set_early_video_resume(void (*proc)(void *data), void *data)
{
if (_machine != _MACH_Pmac)
return;
preempt_disable();
pmac_early_vresume_proc = proc;
pmac_early_vresume_data = data;
preempt_enable();
}
EXPORT_SYMBOL(pmac_set_early_video_resume);
/*
* AGP related suspend/resume code
*/
static struct pci_dev *pmac_agp_bridge;
static int (*pmac_agp_suspend)(struct pci_dev *bridge);
static int (*pmac_agp_resume)(struct pci_dev *bridge);
void pmac_register_agp_pm(struct pci_dev *bridge,
int (*suspend)(struct pci_dev *bridge),
int (*resume)(struct pci_dev *bridge))
{
if (suspend || resume) {
pmac_agp_bridge = bridge;
pmac_agp_suspend = suspend;
pmac_agp_resume = resume;
return;
}
if (bridge != pmac_agp_bridge)
return;
pmac_agp_suspend = pmac_agp_resume = NULL;
return;
}
EXPORT_SYMBOL(pmac_register_agp_pm);
void pmac_suspend_agp_for_card(struct pci_dev *dev)
{
if (pmac_agp_bridge == NULL || pmac_agp_suspend == NULL)
return;
if (pmac_agp_bridge->bus != dev->bus)
return;
pmac_agp_suspend(pmac_agp_bridge);
}
EXPORT_SYMBOL(pmac_suspend_agp_for_card);
void pmac_resume_agp_for_card(struct pci_dev *dev)
{
if (pmac_agp_bridge == NULL || pmac_agp_resume == NULL)
return;
if (pmac_agp_bridge->bus != dev->bus)
return;
pmac_agp_resume(pmac_agp_bridge);
}
EXPORT_SYMBOL(pmac_resume_agp_for_card);
arch/ppc64/kernel/pmac_low_i2c.c 已删除 100644 → 0
浏览文件 @ 35499c01
/*
* arch/ppc/platforms/pmac_low_i2c.c
*
* Copyright (C) 2003 Ben. Herrenschmidt (benh@kernel.crashing.org)
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*
* This file contains some low-level i2c access routines that
* need to be used by various bits of the PowerMac platform code
* at times where the real asynchronous & interrupt driven driver
* cannot be used. The API borrows some semantics from the darwin
* driver in order to ease the implementation of the platform
* properties parser
*/
#undef DEBUG
#include <linux/config.h>
#include <linux/types.h>
#include <linux/sched.h>
#include <linux/init.h>
#include <linux/module.h>
#include <linux/adb.h>
#include <linux/pmu.h>
#include <asm/keylargo.h>
#include <asm/uninorth.h>
#include <asm/io.h>
#include <asm/prom.h>
#include <asm/machdep.h>
#include <asm/pmac_low_i2c.h>
#define MAX_LOW_I2C_HOST 4
#ifdef DEBUG
#define DBG(x...) do {\
printk(KERN_DEBUG "KW:" x); \
} while(0)
#else
#define DBG(x...)
#endif
struct low_i2c_host;
typedef int (*low_i2c_func_t)(struct low_i2c_host *host, u8 addr, u8 sub, u8 *data, int len);
struct low_i2c_host
{
struct device_node *np; /* OF device node */
struct semaphore mutex; /* Access mutex for use by i2c-keywest */
low_i2c_func_t func; /* Access function */
unsigned int is_open : 1; /* Poor man's access control */
int mode; /* Current mode */
int channel; /* Current channel */
int num_channels; /* Number of channels */
void __iomem *base; /* For keywest-i2c, base address */
int bsteps; /* And register stepping */
int speed; /* And speed */
};
static struct low_i2c_host low_i2c_hosts[MAX_LOW_I2C_HOST];
/* No locking is necessary on allocation, we are running way before
* anything can race with us
*/
static struct low_i2c_host *find_low_i2c_host(struct device_node *np)
{
int i;
for (i = 0; i < MAX_LOW_I2C_HOST; i++)
if (low_i2c_hosts[i].np == np)
return &low_i2c_hosts[i];
return NULL;
}
/*
*
* i2c-keywest implementation (UniNorth, U2, U3, Keylargo's)
*
*/
/*
* Keywest i2c definitions borrowed from drivers/i2c/i2c-keywest.h,
* should be moved somewhere in include/asm-ppc/
*/
/* Register indices */
typedef enum {
reg_mode = 0,
reg_control,
reg_status,
reg_isr,
reg_ier,
reg_addr,
reg_subaddr,
reg_data
} reg_t;
/* Mode register */
#define KW_I2C_MODE_100KHZ 0x00
#define KW_I2C_MODE_50KHZ 0x01
#define KW_I2C_MODE_25KHZ 0x02
#define KW_I2C_MODE_DUMB 0x00
#define KW_I2C_MODE_STANDARD 0x04
#define KW_I2C_MODE_STANDARDSUB 0x08
#define KW_I2C_MODE_COMBINED 0x0C
#define KW_I2C_MODE_MODE_MASK 0x0C
#define KW_I2C_MODE_CHAN_MASK 0xF0
/* Control register */
#define KW_I2C_CTL_AAK 0x01
#define KW_I2C_CTL_XADDR 0x02
#define KW_I2C_CTL_STOP 0x04
#define KW_I2C_CTL_START 0x08
/* Status register */
#define KW_I2C_STAT_BUSY 0x01
#define KW_I2C_STAT_LAST_AAK 0x02
#define KW_I2C_STAT_LAST_RW 0x04
#define KW_I2C_STAT_SDA 0x08
#define KW_I2C_STAT_SCL 0x10
/* IER & ISR registers */
#define KW_I2C_IRQ_DATA 0x01
#define KW_I2C_IRQ_ADDR 0x02
#define KW_I2C_IRQ_STOP 0x04
#define KW_I2C_IRQ_START 0x08
#define KW_I2C_IRQ_MASK 0x0F
/* State machine states */
enum {
state_idle,
state_addr,
state_read,
state_write,
state_stop,
state_dead
};
#define WRONG_STATE(name) do {\
printk(KERN_DEBUG "KW: wrong state. Got %s, state: %s (isr: %02x)\n", \
name, __kw_state_names[state], isr); \
} while(0)
static const char *__kw_state_names[] = {
"state_idle",
"state_addr",
"state_read",
"state_write",
"state_stop",
"state_dead"
};
static inline u8 __kw_read_reg(struct low_i2c_host *host, reg_t reg)
{
return readb(host->base + (((unsigned int)reg) << host->bsteps));
}
static inline void __kw_write_reg(struct low_i2c_host *host, reg_t reg, u8 val)
{
writeb(val, host->base + (((unsigned)reg) << host->bsteps));
(void)__kw_read_reg(host, reg_subaddr);
}
#define kw_write_reg(reg, val) __kw_write_reg(host, reg, val)
#define kw_read_reg(reg) __kw_read_reg(host, reg)
/* Don't schedule, the g5 fan controller is too
* timing sensitive
*/
static u8 kw_wait_interrupt(struct low_i2c_host* host)
{
int i, j;
u8 isr;
for (i = 0; i < 100000; i++) {
isr = kw_read_reg(reg_isr) & KW_I2C_IRQ_MASK;
if (isr != 0)
return isr;
/* This code is used with the timebase frozen, we cannot rely
* on udelay ! For now, just use a bogus loop
*/
for (j = 1; j < 10000; j++)
mb();
}
return isr;
}
static int kw_handle_interrupt(struct low_i2c_host *host, int state, int rw, int *rc, u8 **data, int *len, u8 isr)
{
u8 ack;
DBG("kw_handle_interrupt(%s, isr: %x)\n", __kw_state_names[state], isr);
if (isr == 0) {
if (state != state_stop) {
DBG("KW: Timeout !\n");
*rc = -EIO;
goto stop;
}
if (state == state_stop) {
ack = kw_read_reg(reg_status);
if (!(ack & KW_I2C_STAT_BUSY)) {
state = state_idle;
kw_write_reg(reg_ier, 0x00);
}
}
return state;
}
if (isr & KW_I2C_IRQ_ADDR) {
ack = kw_read_reg(reg_status);
if (state != state_addr) {
kw_write_reg(reg_isr, KW_I2C_IRQ_ADDR);
WRONG_STATE("KW_I2C_IRQ_ADDR");
*rc = -EIO;
goto stop;
}
if ((ack & KW_I2C_STAT_LAST_AAK) == 0) {
*rc = -ENODEV;
DBG("KW: NAK on address\n");
return state_stop;
} else {
if (rw) {
state = state_read;
if (*len > 1)
kw_write_reg(reg_control, KW_I2C_CTL_AAK);
} else {
state = state_write;
kw_write_reg(reg_data, **data);
(*data)++; (*len)--;
}
}
kw_write_reg(reg_isr, KW_I2C_IRQ_ADDR);
}
if (isr & KW_I2C_IRQ_DATA) {
if (state == state_read) {
**data = kw_read_reg(reg_data);
(*data)++; (*len)--;
kw_write_reg(reg_isr, KW_I2C_IRQ_DATA);
if ((*len) == 0)
state = state_stop;
else if ((*len) == 1)
kw_write_reg(reg_control, 0);
} else if (state == state_write) {
ack = kw_read_reg(reg_status);
if ((ack & KW_I2C_STAT_LAST_AAK) == 0) {
DBG("KW: nack on data write\n");
*rc = -EIO;
goto stop;
} else if (*len) {
kw_write_reg(reg_data, **data);
(*data)++; (*len)--;
} else {
kw_write_reg(reg_control, KW_I2C_CTL_STOP);
state = state_stop;
*rc = 0;
}
kw_write_reg(reg_isr, KW_I2C_IRQ_DATA);
} else {
kw_write_reg(reg_isr, KW_I2C_IRQ_DATA);
WRONG_STATE("KW_I2C_IRQ_DATA");
if (state != state_stop) {
*rc = -EIO;
goto stop;
}
}
}
if (isr & KW_I2C_IRQ_STOP) {
kw_write_reg(reg_isr, KW_I2C_IRQ_STOP);
if (state != state_stop) {
WRONG_STATE("KW_I2C_IRQ_STOP");
*rc = -EIO;
}
return state_idle;
}
if (isr & KW_I2C_IRQ_START)
kw_write_reg(reg_isr, KW_I2C_IRQ_START);
return state;
stop:
kw_write_reg(reg_control, KW_I2C_CTL_STOP);
return state_stop;
}
static int keywest_low_i2c_func(struct low_i2c_host *host, u8 addr, u8 subaddr, u8 *data, int len)
{
u8 mode_reg = host->speed;
int state = state_addr;
int rc = 0;
/* Setup mode & subaddress if any */
switch(host->mode) {
case pmac_low_i2c_mode_dumb:
printk(KERN_ERR "low_i2c: Dumb mode not supported !\n");
return -EINVAL;
case pmac_low_i2c_mode_std:
mode_reg |= KW_I2C_MODE_STANDARD;
break;
case pmac_low_i2c_mode_stdsub:
mode_reg |= KW_I2C_MODE_STANDARDSUB;
break;
case pmac_low_i2c_mode_combined:
mode_reg |= KW_I2C_MODE_COMBINED;
break;
}
/* Setup channel & clear pending irqs */
kw_write_reg(reg_isr, kw_read_reg(reg_isr));
kw_write_reg(reg_mode, mode_reg | (host->channel << 4));
kw_write_reg(reg_status, 0);
/* Set up address and r/w bit */
kw_write_reg(reg_addr, addr);
/* Set up the sub address */
if ((mode_reg & KW_I2C_MODE_MODE_MASK) == KW_I2C_MODE_STANDARDSUB
|| (mode_reg & KW_I2C_MODE_MODE_MASK) == KW_I2C_MODE_COMBINED)
kw_write_reg(reg_subaddr, subaddr);
/* Start sending address & disable interrupt*/
kw_write_reg(reg_ier, 0 /*KW_I2C_IRQ_MASK*/);
kw_write_reg(reg_control, KW_I2C_CTL_XADDR);
/* State machine, to turn into an interrupt handler */
while(state != state_idle) {
u8 isr = kw_wait_interrupt(host);
state = kw_handle_interrupt(host, state, addr & 1, &rc, &data, &len, isr);
}
return rc;
}
static void keywest_low_i2c_add(struct device_node *np)
{
struct low_i2c_host *host = find_low_i2c_host(NULL);
u32 *psteps, *prate, steps, aoffset = 0;
struct device_node *parent;
if (host == NULL) {
printk(KERN_ERR "low_i2c: Can't allocate host for %s\n",
np->full_name);
return;
}
memset(host, 0, sizeof(*host));
init_MUTEX(&host->mutex);
host->np = of_node_get(np);
psteps = (u32 *)get_property(np, "AAPL,address-step", NULL);
steps = psteps ? (*psteps) : 0x10;
for (host->bsteps = 0; (steps & 0x01) == 0; host->bsteps++)
steps >>= 1;
parent = of_get_parent(np);
host->num_channels = 1;
if (parent && parent->name[0] == 'u') {
host->num_channels = 2;
aoffset = 3;
}
/* Select interface rate */
host->speed = KW_I2C_MODE_100KHZ;
prate = (u32 *)get_property(np, "AAPL,i2c-rate", NULL);
if (prate) switch(*prate) {
case 100:
host->speed = KW_I2C_MODE_100KHZ;
break;
case 50:
host->speed = KW_I2C_MODE_50KHZ;
break;
case 25:
host->speed = KW_I2C_MODE_25KHZ;
break;
}
host->mode = pmac_low_i2c_mode_std;
host->base = ioremap(np->addrs[0].address + aoffset,
np->addrs[0].size);
host->func = keywest_low_i2c_func;
}
/*
*
* PMU implementation
*
*/
#ifdef CONFIG_ADB_PMU
static int pmu_low_i2c_func(struct low_i2c_host *host, u8 addr, u8 sub, u8 *data, int len)
{
// TODO
return -ENODEV;
}
static void pmu_low_i2c_add(struct device_node *np)
{
struct low_i2c_host *host = find_low_i2c_host(NULL);
if (host == NULL) {
printk(KERN_ERR "low_i2c: Can't allocate host for %s\n",
np->full_name);
return;
}
memset(host, 0, sizeof(*host));
init_MUTEX(&host->mutex);
host->np = of_node_get(np);
host->num_channels = 3;
host->mode = pmac_low_i2c_mode_std;
host->func = pmu_low_i2c_func;
}
#endif /* CONFIG_ADB_PMU */
void __init pmac_init_low_i2c(void)
{
struct device_node *np;
/* Probe keywest-i2c busses */
np = of_find_compatible_node(NULL, "i2c", "keywest-i2c");
while(np) {
keywest_low_i2c_add(np);
np = of_find_compatible_node(np, "i2c", "keywest-i2c");
}
#ifdef CONFIG_ADB_PMU
/* Probe PMU busses */
np = of_find_node_by_name(NULL, "via-pmu");
if (np)
pmu_low_i2c_add(np);
#endif /* CONFIG_ADB_PMU */
/* TODO: Add CUDA support as well */
}
int pmac_low_i2c_lock(struct device_node *np)
{
struct low_i2c_host *host = find_low_i2c_host(np);
if (!host)
return -ENODEV;
down(&host->mutex);
return 0;
}
EXPORT_SYMBOL(pmac_low_i2c_lock);
int pmac_low_i2c_unlock(struct device_node *np)
{
struct low_i2c_host *host = find_low_i2c_host(np);
if (!host)
return -ENODEV;
up(&host->mutex);
return 0;
}
EXPORT_SYMBOL(pmac_low_i2c_unlock);
int pmac_low_i2c_open(struct device_node *np, int channel)
{
struct low_i2c_host *host = find_low_i2c_host(np);
if (!host)
return -ENODEV;
if (channel >= host->num_channels)
return -EINVAL;
down(&host->mutex);
host->is_open = 1;
host->channel = channel;
return 0;
}
EXPORT_SYMBOL(pmac_low_i2c_open);
int pmac_low_i2c_close(struct device_node *np)
{
struct low_i2c_host *host = find_low_i2c_host(np);
if (!host)
return -ENODEV;
host->is_open = 0;
up(&host->mutex);
return 0;
}
EXPORT_SYMBOL(pmac_low_i2c_close);
int pmac_low_i2c_setmode(struct device_node *np, int mode)
{
struct low_i2c_host *host = find_low_i2c_host(np);
if (!host)
return -ENODEV;
WARN_ON(!host->is_open);
host->mode = mode;
return 0;
}
EXPORT_SYMBOL(pmac_low_i2c_setmode);
int pmac_low_i2c_xfer(struct device_node *np, u8 addrdir, u8 subaddr, u8 *data, int len)
{
struct low_i2c_host *host = find_low_i2c_host(np);
if (!host)
return -ENODEV;
WARN_ON(!host->is_open);
return host->func(host, addrdir, subaddr, data, len);
}
EXPORT_SYMBOL(pmac_low_i2c_xfer);
arch/ppc64/kernel/pmac_nvram.c 已删除 100644 → 0
浏览文件 @ 35499c01
/*
* arch/ppc/platforms/pmac_nvram.c
*
* Copyright (C) 2002 Benjamin Herrenschmidt (benh@kernel.crashing.org)
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*
* Todo: - add support for the OF persistent properties
*/
#include <linux/config.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/stddef.h>
#include <linux/string.h>
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/errno.h>
#include <linux/bootmem.h>
#include <linux/completion.h>
#include <linux/spinlock.h>
#include <asm/sections.h>
#include <asm/io.h>
#include <asm/system.h>
#include <asm/prom.h>
#include <asm/machdep.h>
#include <asm/nvram.h>
#define DEBUG
#ifdef DEBUG
#define DBG(x...) printk(x)
#else
#define DBG(x...)
#endif
#define NVRAM_SIZE 0x2000 /* 8kB of non-volatile RAM */
#define CORE99_SIGNATURE 0x5a
#define CORE99_ADLER_START 0x14
/* On Core99, nvram is either a sharp, a micron or an AMD flash */
#define SM_FLASH_STATUS_DONE 0x80
#define SM_FLASH_STATUS_ERR 0x38
#define SM_FLASH_CMD_ERASE_CONFIRM 0xd0
#define SM_FLASH_CMD_ERASE_SETUP 0x20
#define SM_FLASH_CMD_RESET 0xff
#define SM_FLASH_CMD_WRITE_SETUP 0x40
#define SM_FLASH_CMD_CLEAR_STATUS 0x50
#define SM_FLASH_CMD_READ_STATUS 0x70
/* CHRP NVRAM header */
struct chrp_header {
u8 signature;
u8 cksum;
u16 len;
char name[12];
u8 data[0];
};
struct core99_header {
struct chrp_header hdr;
u32 adler;
u32 generation;
u32 reserved[2];
};
/*
* Read and write the non-volatile RAM on PowerMacs and CHRP machines.
*/
static volatile unsigned char *nvram_data;
static int core99_bank = 0;
// XXX Turn that into a sem
static DEFINE_SPINLOCK(nv_lock);
extern int system_running;
static int (*core99_write_bank)(int bank, u8* datas);
static int (*core99_erase_bank)(int bank);
static char *nvram_image;
static ssize_t core99_nvram_read(char *buf, size_t count, loff_t *index)
{
int i;
if (nvram_image == NULL)
return -ENODEV;
if (*index > NVRAM_SIZE)
return 0;
i = *index;
if (i + count > NVRAM_SIZE)
count = NVRAM_SIZE - i;
memcpy(buf, &nvram_image[i], count);
*index = i + count;
return count;
}
static ssize_t core99_nvram_write(char *buf, size_t count, loff_t *index)
{
int i;
if (nvram_image == NULL)
return -ENODEV;
if (*index > NVRAM_SIZE)
return 0;
i = *index;
if (i + count > NVRAM_SIZE)
count = NVRAM_SIZE - i;
memcpy(&nvram_image[i], buf, count);
*index = i + count;
return count;
}
static ssize_t core99_nvram_size(void)
{
if (nvram_image == NULL)
return -ENODEV;
return NVRAM_SIZE;
}
static u8 chrp_checksum(struct chrp_header* hdr)
{
u8 *ptr;
u16 sum = hdr->signature;
for (ptr = (u8 *)&hdr->len; ptr < hdr->data; ptr++)
sum += *ptr;
while (sum > 0xFF)
sum = (sum & 0xFF) + (sum>>8);
return sum;
}
static u32 core99_calc_adler(u8 *buffer)
{
int cnt;
u32 low, high;
buffer += CORE99_ADLER_START;
low = 1;
high = 0;
for (cnt=0; cnt<(NVRAM_SIZE-CORE99_ADLER_START); cnt++) {
if ((cnt % 5000) == 0) {
high %= 65521UL;
high %= 65521UL;
}
low += buffer[cnt];
high += low;
}
low %= 65521UL;
high %= 65521UL;
return (high << 16) | low;
}
static u32 core99_check(u8* datas)
{
struct core99_header* hdr99 = (struct core99_header*)datas;
if (hdr99->hdr.signature != CORE99_SIGNATURE) {
DBG("Invalid signature\n");
return 0;
}
if (hdr99->hdr.cksum != chrp_checksum(&hdr99->hdr)) {
DBG("Invalid checksum\n");
return 0;
}
if (hdr99->adler != core99_calc_adler(datas)) {
DBG("Invalid adler\n");
return 0;
}
return hdr99->generation;
}
static int sm_erase_bank(int bank)
{
int stat, i;
unsigned long timeout;
u8* base = (u8 *)nvram_data + core99_bank*NVRAM_SIZE;
DBG("nvram: Sharp/Micron Erasing bank %d...\n", bank);
out_8(base, SM_FLASH_CMD_ERASE_SETUP);
out_8(base, SM_FLASH_CMD_ERASE_CONFIRM);
timeout = 0;
do {
if (++timeout > 1000000) {
printk(KERN_ERR "nvram: Sharp/Miron flash erase timeout !\n");
break;
}
out_8(base, SM_FLASH_CMD_READ_STATUS);
stat = in_8(base);
} while (!(stat & SM_FLASH_STATUS_DONE));
out_8(base, SM_FLASH_CMD_CLEAR_STATUS);
out_8(base, SM_FLASH_CMD_RESET);
for (i=0; i<NVRAM_SIZE; i++)
if (base[i] != 0xff) {
printk(KERN_ERR "nvram: Sharp/Micron flash erase failed !\n");
return -ENXIO;
}
return 0;
}
static int sm_write_bank(int bank, u8* datas)
{
int i, stat = 0;
unsigned long timeout;
u8* base = (u8 *)nvram_data + core99_bank*NVRAM_SIZE;
DBG("nvram: Sharp/Micron Writing bank %d...\n", bank);
for (i=0; i<NVRAM_SIZE; i++) {
out_8(base+i, SM_FLASH_CMD_WRITE_SETUP);
udelay(1);
out_8(base+i, datas[i]);
timeout = 0;
do {
if (++timeout > 1000000) {
printk(KERN_ERR "nvram: Sharp/Micron flash write timeout !\n");
break;
}
out_8(base, SM_FLASH_CMD_READ_STATUS);
stat = in_8(base);
} while (!(stat & SM_FLASH_STATUS_DONE));
if (!(stat & SM_FLASH_STATUS_DONE))
break;
}
out_8(base, SM_FLASH_CMD_CLEAR_STATUS);
out_8(base, SM_FLASH_CMD_RESET);
for (i=0; i<NVRAM_SIZE; i++)
if (base[i] != datas[i]) {
printk(KERN_ERR "nvram: Sharp/Micron flash write failed !\n");
return -ENXIO;
}
return 0;
}
static int amd_erase_bank(int bank)
{
int i, stat = 0;
unsigned long timeout;
u8* base = (u8 *)nvram_data + core99_bank*NVRAM_SIZE;
DBG("nvram: AMD Erasing bank %d...\n", bank);
/* Unlock 1 */
out_8(base+0x555, 0xaa);
udelay(1);
/* Unlock 2 */
out_8(base+0x2aa, 0x55);
udelay(1);
/* Sector-Erase */
out_8(base+0x555, 0x80);
udelay(1);
out_8(base+0x555, 0xaa);
udelay(1);
out_8(base+0x2aa, 0x55);
udelay(1);
out_8(base, 0x30);
udelay(1);
timeout = 0;
do {
if (++timeout > 1000000) {
printk(KERN_ERR "nvram: AMD flash erase timeout !\n");
break;
}
stat = in_8(base) ^ in_8(base);
} while (stat != 0);
/* Reset */
out_8(base, 0xf0);
udelay(1);
for (i=0; i<NVRAM_SIZE; i++)
if (base[i] != 0xff) {
printk(KERN_ERR "nvram: AMD flash erase failed !\n");
return -ENXIO;
}
return 0;
}
static int amd_write_bank(int bank, u8* datas)
{
int i, stat = 0;
unsigned long timeout;
u8* base = (u8 *)nvram_data + core99_bank*NVRAM_SIZE;
DBG("nvram: AMD Writing bank %d...\n", bank);
for (i=0; i<NVRAM_SIZE; i++) {
/* Unlock 1 */
out_8(base+0x555, 0xaa);
udelay(1);
/* Unlock 2 */
out_8(base+0x2aa, 0x55);
udelay(1);
/* Write single word */
out_8(base+0x555, 0xa0);
udelay(1);
out_8(base+i, datas[i]);
timeout = 0;
do {
if (++timeout > 1000000) {
printk(KERN_ERR "nvram: AMD flash write timeout !\n");
break;
}
stat = in_8(base) ^ in_8(base);
} while (stat != 0);
if (stat != 0)
break;
}
/* Reset */
out_8(base, 0xf0);
udelay(1);
for (i=0; i<NVRAM_SIZE; i++)
if (base[i] != datas[i]) {
printk(KERN_ERR "nvram: AMD flash write failed !\n");
return -ENXIO;
}
return 0;
}
static void core99_nvram_sync(void)
{
struct core99_header* hdr99;
unsigned long flags;
spin_lock_irqsave(&nv_lock, flags);
if (!memcmp(nvram_image, (u8*)nvram_data + core99_bank*NVRAM_SIZE,
NVRAM_SIZE))
goto bail;
DBG("Updating nvram...\n");
hdr99 = (struct core99_header*)nvram_image;
hdr99->generation++;
hdr99->hdr.signature = CORE99_SIGNATURE;
hdr99->hdr.cksum = chrp_checksum(&hdr99->hdr);
hdr99->adler = core99_calc_adler(nvram_image);
core99_bank = core99_bank ? 0 : 1;
if (core99_erase_bank)
if (core99_erase_bank(core99_bank)) {
printk("nvram: Error erasing bank %d\n", core99_bank);
goto bail;
}
if (core99_write_bank)
if (core99_write_bank(core99_bank, nvram_image))
printk("nvram: Error writing bank %d\n", core99_bank);
bail:
spin_unlock_irqrestore(&nv_lock, flags);
}
int __init pmac_nvram_init(void)
{
struct device_node *dp;
u32 gen_bank0, gen_bank1;
int i;
dp = find_devices("nvram");
if (dp == NULL) {
printk(KERN_ERR "Can't find NVRAM device\n");
return -ENODEV;
}
if (!device_is_compatible(dp, "nvram,flash")) {
printk(KERN_ERR "Incompatible type of NVRAM\n");
return -ENXIO;
}
nvram_image = alloc_bootmem(NVRAM_SIZE);
if (nvram_image == NULL) {
printk(KERN_ERR "nvram: can't allocate ram image\n");
return -ENOMEM;
}
nvram_data = ioremap(dp->addrs[0].address, NVRAM_SIZE*2);
DBG("nvram: Checking bank 0...\n");
gen_bank0 = core99_check((u8 *)nvram_data);
gen_bank1 = core99_check((u8 *)nvram_data + NVRAM_SIZE);
core99_bank = (gen_bank0 < gen_bank1) ? 1 : 0;
DBG("nvram: gen0=%d, gen1=%d\n", gen_bank0, gen_bank1);
DBG("nvram: Active bank is: %d\n", core99_bank);
for (i=0; i<NVRAM_SIZE; i++)
nvram_image[i] = nvram_data[i + core99_bank*NVRAM_SIZE];
ppc_md.nvram_read = core99_nvram_read;
ppc_md.nvram_write = core99_nvram_write;
ppc_md.nvram_size = core99_nvram_size;
ppc_md.nvram_sync = core99_nvram_sync;
/*
* Maybe we could be smarter here though making an exclusive list
* of known flash chips is a bit nasty as older OF didn't provide us
* with a useful "compatible" entry. A solution would be to really
* identify the chip using flash id commands and base ourselves on
* a list of known chips IDs
*/
if (device_is_compatible(dp, "amd-0137")) {
core99_erase_bank = amd_erase_bank;
core99_write_bank = amd_write_bank;
} else {
core99_erase_bank = sm_erase_bank;
core99_write_bank = sm_write_bank;
}
return 0;
}
int pmac_get_partition(int partition)
{
struct nvram_partition *part;
const char *name;
int sig;
switch(partition) {
case pmac_nvram_OF:
name = "common";
sig = NVRAM_SIG_SYS;
break;
case pmac_nvram_XPRAM:
name = "APL,MacOS75";
sig = NVRAM_SIG_OS;
break;
case pmac_nvram_NR:
default:
/* Oldworld stuff */
return -ENODEV;
}
part = nvram_find_partition(sig, name);
if (part == NULL)
return 0;
return part->index;
}
u8 pmac_xpram_read(int xpaddr)
{
int offset = pmac_get_partition(pmac_nvram_XPRAM);
loff_t index;
u8 buf;
ssize_t count;
if (offset < 0 || xpaddr < 0 || xpaddr > 0x100)
return 0xff;
index = offset + xpaddr;
count = ppc_md.nvram_read(&buf, 1, &index);
if (count != 1)
return 0xff;
return buf;
}
void pmac_xpram_write(int xpaddr, u8 data)
{
int offset = pmac_get_partition(pmac_nvram_XPRAM);
loff_t index;
u8 buf;
if (offset < 0 || xpaddr < 0 || xpaddr > 0x100)
return;
index = offset + xpaddr;
buf = data;
ppc_md.nvram_write(&buf, 1, &index);
}
EXPORT_SYMBOL(pmac_get_partition);
EXPORT_SYMBOL(pmac_xpram_read);
EXPORT_SYMBOL(pmac_xpram_write);
arch/ppc64/kernel/pmac_pci.c 已删除 100644 → 0
浏览文件 @ 35499c01
此差异已折叠。
arch/ppc64/kernel/pmac_setup.c 已删除 100644 → 0
浏览文件 @ 35499c01
/*
* arch/ppc/platforms/setup.c
*
* PowerPC version
* Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
*
* Adapted for Power Macintosh by Paul Mackerras
* Copyright (C) 1996 Paul Mackerras (paulus@cs.anu.edu.au)
*
* Derived from "arch/alpha/kernel/setup.c"
* Copyright (C) 1995 Linus Torvalds
*
* Maintained by Benjamin Herrenschmidt (benh@kernel.crashing.org)
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*
*/
/*
* bootup setup stuff..
*/
#undef DEBUG
#include <linux/config.h>
#include <linux/init.h>
#include <linux/errno.h>
#include <linux/sched.h>
#include <linux/kernel.h>
#include <linux/mm.h>
#include <linux/stddef.h>
#include <linux/unistd.h>
#include <linux/ptrace.h>
#include <linux/slab.h>
#include <linux/user.h>
#include <linux/a.out.h>
#include <linux/tty.h>
#include <linux/string.h>
#include <linux/delay.h>
#include <linux/ioport.h>
#include <linux/major.h>
#include <linux/initrd.h>
#include <linux/vt_kern.h>
#include <linux/console.h>
#include <linux/ide.h>
#include <linux/pci.h>
#include <linux/adb.h>
#include <linux/cuda.h>
#include <linux/pmu.h>
#include <linux/irq.h>
#include <linux/seq_file.h>
#include <linux/root_dev.h>
#include <linux/bitops.h>
#include <asm/processor.h>
#include <asm/sections.h>
#include <asm/prom.h>
#include <asm/system.h>
#include <asm/io.h>
#include <asm/pci-bridge.h>
#include <asm/iommu.h>
#include <asm/machdep.h>
#include <asm/dma.h>
#include <asm/btext.h>
#include <asm/cputable.h>
#include <asm/pmac_feature.h>
#include <asm/time.h>
#include <asm/of_device.h>
#include <asm/lmb.h>
#include <asm/smu.h>
#include <asm/pmc.h>
#include <asm/mpic.h>
#include <asm/udbg.h>
#include "pmac.h"
#ifdef DEBUG
#define DBG(fmt...) udbg_printf(fmt)
#else
#define DBG(fmt...)
#endif
static int current_root_goodness = -1;
#define DEFAULT_ROOT_DEVICE Root_SDA1 /* sda1 - slightly silly choice */
extern int powersave_nap;
int sccdbg;
sys_ctrler_t sys_ctrler;
EXPORT_SYMBOL(sys_ctrler);
#ifdef CONFIG_PMAC_SMU
unsigned long smu_cmdbuf_abs;
EXPORT_SYMBOL(smu_cmdbuf_abs);
#endif
extern void udbg_init_scc(struct device_node *np);
static void pmac_show_cpuinfo(struct seq_file *m)
{
struct device_node *np;
char *pp;
int plen;
char* mbname;
int mbmodel = pmac_call_feature(PMAC_FTR_GET_MB_INFO, NULL,
PMAC_MB_INFO_MODEL, 0);
unsigned int mbflags = pmac_call_feature(PMAC_FTR_GET_MB_INFO, NULL,
PMAC_MB_INFO_FLAGS, 0);
if (pmac_call_feature(PMAC_FTR_GET_MB_INFO, NULL, PMAC_MB_INFO_NAME,
(long)&mbname) != 0)
mbname = "Unknown";
/* find motherboard type */
seq_printf(m, "machine\t\t: ");
np = find_devices("device-tree");
if (np != NULL) {
pp = (char *) get_property(np, "model", NULL);
if (pp != NULL)
seq_printf(m, "%s\n", pp);
else
seq_printf(m, "PowerMac\n");
pp = (char *) get_property(np, "compatible", &plen);
if (pp != NULL) {
seq_printf(m, "motherboard\t:");
while (plen > 0) {
int l = strlen(pp) + 1;
seq_printf(m, " %s", pp);
plen -= l;
pp += l;
}
seq_printf(m, "\n");
}
} else
seq_printf(m, "PowerMac\n");
/* print parsed model */
seq_printf(m, "detected as\t: %d (%s)\n", mbmodel, mbname);
seq_printf(m, "pmac flags\t: %08x\n", mbflags);
/* Indicate newworld */
seq_printf(m, "pmac-generation\t: NewWorld\n");
}
static void __init pmac_setup_arch(void)
{
/* init to some ~sane value until calibrate_delay() runs */
loops_per_jiffy = 50000000;
/* Probe motherboard chipset */
pmac_feature_init();
#if 0
/* Lock-enable the SCC channel used for debug */
if (sccdbg) {
np = of_find_node_by_name(NULL, "escc");
if (np)
pmac_call_feature(PMAC_FTR_SCC_ENABLE, np,
PMAC_SCC_ASYNC | PMAC_SCC_FLAG_XMON, 1);
}
#endif
/* We can NAP */
powersave_nap = 1;
#ifdef CONFIG_ADB_PMU
/* Initialize the PMU if any */
find_via_pmu();
#endif
#ifdef CONFIG_PMAC_SMU
/* Initialize the SMU if any */
smu_init();
#endif
/* Init NVRAM access */
pmac_nvram_init();
/* Setup SMP callback */
#ifdef CONFIG_SMP
pmac_setup_smp();
#endif
/* Lookup PCI hosts */
pmac_pci_init();
#ifdef CONFIG_DUMMY_CONSOLE
conswitchp = &dummy_con;
#endif
printk(KERN_INFO "Using native/NAP idle loop\n");
}
#ifdef CONFIG_SCSI
void note_scsi_host(struct device_node *node, void *host)
{
/* Obsolete */
}
#endif
static int initializing = 1;
static int pmac_late_init(void)
{
initializing = 0;
return 0;
}
late_initcall(pmac_late_init);
/* can't be __init - can be called whenever a disk is first accessed */
void note_bootable_part(dev_t dev, int part, int goodness)
{
extern dev_t boot_dev;
char *p;
if (!initializing)
return;
if ((goodness <= current_root_goodness) &&
ROOT_DEV != DEFAULT_ROOT_DEVICE)
return;
p = strstr(saved_command_line, "root=");
if (p != NULL && (p == saved_command_line || p[-1] == ' '))
return;
if (!boot_dev || dev == boot_dev) {
ROOT_DEV = dev + part;
boot_dev = 0;
current_root_goodness = goodness;
}
}
static void pmac_restart(char *cmd)
{
switch(sys_ctrler) {
#ifdef CONFIG_ADB_PMU
case SYS_CTRLER_PMU:
pmu_restart();
break;
#endif
#ifdef CONFIG_PMAC_SMU
case SYS_CTRLER_SMU:
smu_restart();
break;
#endif
default:
;
}
}
static void pmac_power_off(void)
{
switch(sys_ctrler) {
#ifdef CONFIG_ADB_PMU
case SYS_CTRLER_PMU:
pmu_shutdown();
break;
#endif
#ifdef CONFIG_PMAC_SMU
case SYS_CTRLER_SMU:
smu_shutdown();
break;
#endif
default:
;
}
}
static void pmac_halt(void)
{
pmac_power_off();
}
/*
* Early initialization.
*/
static void __init pmac_init_early(void)
{
DBG(" -> pmac_init_early\n");
/* Initialize hash table, from now on, we can take hash faults
* and call ioremap
*/
hpte_init_native();
/* Init SCC */
if (strstr(cmd_line, "sccdbg")) {
sccdbg = 1;
udbg_init_scc(NULL);
}
/* Setup interrupt mapping options */
ppc64_interrupt_controller = IC_OPEN_PIC;
iommu_init_early_u3();
DBG(" <- pmac_init_early\n");
}
static int pmac_u3_cascade(struct pt_regs *regs, void *data)
{
return mpic_get_one_irq((struct mpic *)data, regs);
}
static __init void pmac_init_IRQ(void)
{
struct device_node *irqctrler = NULL;
struct device_node *irqctrler2 = NULL;
struct device_node *np = NULL;
struct mpic *mpic1, *mpic2;
/* We first try to detect Apple's new Core99 chipset, since mac-io
* is quite different on those machines and contains an IBM MPIC2.
*/
while ((np = of_find_node_by_type(np, "open-pic")) != NULL) {
struct device_node *parent = of_get_parent(np);
if (parent && !strcmp(parent->name, "u3"))
irqctrler2 = of_node_get(np);
else
irqctrler = of_node_get(np);
of_node_put(parent);
}
if (irqctrler != NULL && irqctrler->n_addrs > 0) {
unsigned char senses[128];
printk(KERN_INFO "PowerMac using OpenPIC irq controller at 0x%08x\n",
(unsigned int)irqctrler->addrs[0].address);
prom_get_irq_senses(senses, 0, 128);
mpic1 = mpic_alloc(irqctrler->addrs[0].address,
MPIC_PRIMARY | MPIC_WANTS_RESET,
0, 0, 128, 256, senses, 128, " K2-MPIC ");
BUG_ON(mpic1 == NULL);
mpic_init(mpic1);
if (irqctrler2 != NULL && irqctrler2->n_intrs > 0 &&
irqctrler2->n_addrs > 0) {
printk(KERN_INFO "Slave OpenPIC at 0x%08x hooked on IRQ %d\n",
(u32)irqctrler2->addrs[0].address,
irqctrler2->intrs[0].line);
pmac_call_feature(PMAC_FTR_ENABLE_MPIC, irqctrler2, 0, 0);
prom_get_irq_senses(senses, 128, 128 + 128);
/* We don't need to set MPIC_BROKEN_U3 here since we don't have
* hypertransport interrupts routed to it
*/
mpic2 = mpic_alloc(irqctrler2->addrs[0].address,
MPIC_BIG_ENDIAN | MPIC_WANTS_RESET,
0, 128, 128, 0, senses, 128, " U3-MPIC ");
BUG_ON(mpic2 == NULL);
mpic_init(mpic2);
mpic_setup_cascade(irqctrler2->intrs[0].line,
pmac_u3_cascade, mpic2);
}
}
of_node_put(irqctrler);
of_node_put(irqctrler2);
}
static void __init pmac_progress(char *s, unsigned short hex)
{
if (sccdbg) {
udbg_puts(s);
udbg_puts("\n");
}
#ifdef CONFIG_BOOTX_TEXT
else if (boot_text_mapped) {
btext_drawstring(s);
btext_drawstring("\n");
}
#endif /* CONFIG_BOOTX_TEXT */
}
/*
* pmac has no legacy IO, anything calling this function has to
* fail or bad things will happen
*/
static int pmac_check_legacy_ioport(unsigned int baseport)
{
return -ENODEV;
}
static int __init pmac_declare_of_platform_devices(void)
{
struct device_node *np, *npp;
npp = of_find_node_by_name(NULL, "u3");
if (npp) {
for (np = NULL; (np = of_get_next_child(npp, np)) != NULL;) {
if (strncmp(np->name, "i2c", 3) == 0) {
of_platform_device_create(np, "u3-i2c", NULL);
of_node_put(np);
break;
}
}
of_node_put(npp);
}
npp = of_find_node_by_type(NULL, "smu");
if (npp) {
of_platform_device_create(npp, "smu", NULL);
of_node_put(npp);
}
return 0;
}
device_initcall(pmac_declare_of_platform_devices);
/*
* Called very early, MMU is off, device-tree isn't unflattened
*/
static int __init pmac_probe(int platform)
{
if (platform != PLATFORM_POWERMAC)
return 0;
/*
* On U3, the DART (iommu) must be allocated now since it
* has an impact on htab_initialize (due to the large page it
* occupies having to be broken up so the DART itself is not
* part of the cacheable linar mapping
*/
alloc_u3_dart_table();
#ifdef CONFIG_PMAC_SMU
/*
* SMU based G5s need some memory below 2Gb, at least the current
* driver needs that. We have to allocate it now. We allocate 4k
* (1 small page) for now.
*/
smu_cmdbuf_abs = lmb_alloc_base(4096, 4096, 0x80000000UL);
#endif /* CONFIG_PMAC_SMU */
return 1;
}
static int pmac_probe_mode(struct pci_bus *bus)
{
struct device_node *node = bus->sysdata;
/* We need to use normal PCI probing for the AGP bus,
since the device for the AGP bridge isn't in the tree. */
if (bus->self == NULL && device_is_compatible(node, "u3-agp"))
return PCI_PROBE_NORMAL;
return PCI_PROBE_DEVTREE;
}
struct machdep_calls __initdata pmac_md = {
#ifdef CONFIG_HOTPLUG_CPU
.cpu_die = generic_mach_cpu_die,
#endif
.probe = pmac_probe,
.setup_arch = pmac_setup_arch,
.init_early = pmac_init_early,
.show_cpuinfo = pmac_show_cpuinfo,
.init_IRQ = pmac_init_IRQ,
.get_irq = mpic_get_irq,
.pcibios_fixup = pmac_pcibios_fixup,
.pci_probe_mode = pmac_probe_mode,
.restart = pmac_restart,
.power_off = pmac_power_off,
.halt = pmac_halt,
.get_boot_time = pmac_get_boot_time,
.set_rtc_time = pmac_set_rtc_time,
.get_rtc_time = pmac_get_rtc_time,
.calibrate_decr = pmac_calibrate_decr,
.feature_call = pmac_do_feature_call,
.progress = pmac_progress,
.check_legacy_ioport = pmac_check_legacy_ioport,
.idle_loop = native_idle,
.enable_pmcs = power4_enable_pmcs,
};
arch/ppc64/kernel/pmac_smp.c 已删除 100644 → 0
浏览文件 @ 35499c01
/*
* SMP support for power macintosh.
*
* We support both the old "powersurge" SMP architecture
* and the current Core99 (G4 PowerMac) machines.
*
* Note that we don't support the very first rev. of
* Apple/DayStar 2 CPUs board, the one with the funky
* watchdog. Hopefully, none of these should be there except
* maybe internally to Apple. I should probably still add some
* code to detect this card though and disable SMP. --BenH.
*
* Support Macintosh G4 SMP by Troy Benjegerdes (hozer@drgw.net)
* and Ben Herrenschmidt <benh@kernel.crashing.org>.
*
* Support for DayStar quad CPU cards
* Copyright (C) XLR8, Inc. 1994-2000
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
#undef DEBUG
#include <linux/config.h>
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/smp.h>
#include <linux/smp_lock.h>
#include <linux/interrupt.h>
#include <linux/kernel_stat.h>
#include <linux/init.h>
#include <linux/spinlock.h>
#include <linux/errno.h>
#include <linux/irq.h>
#include <asm/ptrace.h>
#include <asm/atomic.h>
#include <asm/irq.h>
#include <asm/page.h>
#include <asm/pgtable.h>
#include <asm/sections.h>
#include <asm/io.h>
#include <asm/prom.h>
#include <asm/smp.h>
#include <asm/machdep.h>
#include <asm/pmac_feature.h>
#include <asm/time.h>
#include <asm/cacheflush.h>
#include <asm/keylargo.h>
#include <asm/pmac_low_i2c.h>
#include <asm/mpic.h>
#ifdef DEBUG
#define DBG(fmt...) udbg_printf(fmt)
#else
#define DBG(fmt...)
#endif
extern void __secondary_start_pmac_0(void);
extern struct smp_ops_t *smp_ops;
static void (*pmac_tb_freeze)(int freeze);
static struct device_node *pmac_tb_clock_chip_host;
static u8 pmac_tb_pulsar_addr;
static DEFINE_SPINLOCK(timebase_lock);
static unsigned long timebase;
static void smp_core99_cypress_tb_freeze(int freeze)
{
u8 data;
int rc;
/* Strangely, the device-tree says address is 0xd2, but darwin
* accesses 0xd0 ...
*/
pmac_low_i2c_setmode(pmac_tb_clock_chip_host, pmac_low_i2c_mode_combined);
rc = pmac_low_i2c_xfer(pmac_tb_clock_chip_host,
0xd0 | pmac_low_i2c_read,
0x81, &data, 1);
if (rc != 0)
goto bail;
data = (data & 0xf3) | (freeze ? 0x00 : 0x0c);
pmac_low_i2c_setmode(pmac_tb_clock_chip_host, pmac_low_i2c_mode_stdsub);
rc = pmac_low_i2c_xfer(pmac_tb_clock_chip_host,
0xd0 | pmac_low_i2c_write,
0x81, &data, 1);
bail:
if (rc != 0) {
printk("Cypress Timebase %s rc: %d\n",
freeze ? "freeze" : "unfreeze", rc);
panic("Timebase freeze failed !\n");
}
}
static void smp_core99_pulsar_tb_freeze(int freeze)
{
u8 data;
int rc;
pmac_low_i2c_setmode(pmac_tb_clock_chip_host, pmac_low_i2c_mode_combined);
rc = pmac_low_i2c_xfer(pmac_tb_clock_chip_host,
pmac_tb_pulsar_addr | pmac_low_i2c_read,
0x2e, &data, 1);
if (rc != 0)
goto bail;
data = (data & 0x88) | (freeze ? 0x11 : 0x22);
pmac_low_i2c_setmode(pmac_tb_clock_chip_host, pmac_low_i2c_mode_stdsub);
rc = pmac_low_i2c_xfer(pmac_tb_clock_chip_host,
pmac_tb_pulsar_addr | pmac_low_i2c_write,
0x2e, &data, 1);
bail:
if (rc != 0) {
printk(KERN_ERR "Pulsar Timebase %s rc: %d\n",
freeze ? "freeze" : "unfreeze", rc);
panic("Timebase freeze failed !\n");
}
}
static void smp_core99_give_timebase(void)
{
/* Open i2c bus for synchronous access */
if (pmac_low_i2c_open(pmac_tb_clock_chip_host, 0))
panic("Can't open i2c for TB sync !\n");
spin_lock(&timebase_lock);
(*pmac_tb_freeze)(1);
mb();
timebase = get_tb();
spin_unlock(&timebase_lock);
while (timebase)
barrier();
spin_lock(&timebase_lock);
(*pmac_tb_freeze)(0);
spin_unlock(&timebase_lock);
/* Close i2c bus */
pmac_low_i2c_close(pmac_tb_clock_chip_host);
}
static void __devinit smp_core99_take_timebase(void)
{
while (!timebase)
barrier();
spin_lock(&timebase_lock);
set_tb(timebase >> 32, timebase & 0xffffffff);
timebase = 0;
spin_unlock(&timebase_lock);
}
static int __init smp_core99_probe(void)
{
struct device_node *cpus;
struct device_node *cc;
int ncpus = 0;
/* Maybe use systemconfiguration here ? */
if (ppc_md.progress) ppc_md.progress("smp_core99_probe", 0x345);
/* Count CPUs in the device-tree */
for (cpus = NULL; (cpus = of_find_node_by_type(cpus, "cpu")) != NULL;)
++ncpus;
printk(KERN_INFO "PowerMac SMP probe found %d cpus\n", ncpus);
/* Nothing more to do if less than 2 of them */
if (ncpus <= 1)
return 1;
/* HW sync only on these platforms */
if (!machine_is_compatible("PowerMac7,2") &&
!machine_is_compatible("PowerMac7,3") &&
!machine_is_compatible("RackMac3,1"))
goto nohwsync;
/* Look for the clock chip */
for (cc = NULL; (cc = of_find_node_by_name(cc, "i2c-hwclock")) != NULL;) {
struct device_node *p = of_get_parent(cc);
u32 *reg;
int ok;
ok = p && device_is_compatible(p, "uni-n-i2c");
if (!ok)
goto next;
reg = (u32 *)get_property(cc, "reg", NULL);
if (reg == NULL)
goto next;
switch (*reg) {
case 0xd2:
if (device_is_compatible(cc, "pulsar-legacy-slewing")) {
pmac_tb_freeze = smp_core99_pulsar_tb_freeze;
pmac_tb_pulsar_addr = 0xd2;
printk(KERN_INFO "Timebase clock is Pulsar chip\n");
} else if (device_is_compatible(cc, "cy28508")) {
pmac_tb_freeze = smp_core99_cypress_tb_freeze;
printk(KERN_INFO "Timebase clock is Cypress chip\n");
}
break;
case 0xd4:
pmac_tb_freeze = smp_core99_pulsar_tb_freeze;
pmac_tb_pulsar_addr = 0xd4;
printk(KERN_INFO "Timebase clock is Pulsar chip\n");
break;
}
if (pmac_tb_freeze != NULL) {
pmac_tb_clock_chip_host = p;
smp_ops->give_timebase = smp_core99_give_timebase;
smp_ops->take_timebase = smp_core99_take_timebase;
of_node_put(cc);
of_node_put(p);
break;
}
next:
of_node_put(p);
}
nohwsync:
mpic_request_ipis();
return ncpus;
}
static void __init smp_core99_kick_cpu(int nr)
{
unsigned int save_vector, j;
unsigned long new_vector;
unsigned long flags;
volatile unsigned int *vector
= ((volatile unsigned int *)(KERNELBASE+0x100));
if (nr < 1 || nr > 3)
return;
if (ppc_md.progress) ppc_md.progress("smp_core99_kick_cpu", 0x346);
local_irq_save(flags);
local_irq_disable();
/* Save reset vector */
save_vector = *vector;
/* Setup fake reset vector that does
* b __secondary_start_pmac_0 + nr*8 - KERNELBASE
*/
new_vector = (unsigned long) __secondary_start_pmac_0 + nr * 8;
*vector = 0x48000002 + (new_vector - KERNELBASE);
/* flush data cache and inval instruction cache */
flush_icache_range((unsigned long) vector, (unsigned long) vector + 4);
/* Put some life in our friend */
pmac_call_feature(PMAC_FTR_RESET_CPU, NULL, nr, 0);
paca[nr].cpu_start = 1;
/* FIXME: We wait a bit for the CPU to take the exception, I should
* instead wait for the entry code to set something for me. Well,
* ideally, all that crap will be done in prom.c and the CPU left
* in a RAM-based wait loop like CHRP.
*/
for (j = 1; j < 1000000; j++)
mb();
/* Restore our exception vector */
*vector = save_vector;
flush_icache_range((unsigned long) vector, (unsigned long) vector + 4);
local_irq_restore(flags);
if (ppc_md.progress) ppc_md.progress("smp_core99_kick_cpu done", 0x347);
}
static void __init smp_core99_setup_cpu(int cpu_nr)
{
/* Setup MPIC */
mpic_setup_this_cpu();
if (cpu_nr == 0) {
extern void g5_phy_disable_cpu1(void);
/* If we didn't start the second CPU, we must take
* it off the bus
*/
if (num_online_cpus() < 2)
g5_phy_disable_cpu1();
if (ppc_md.progress) ppc_md.progress("smp_core99_setup_cpu 0 done", 0x349);
}
}
struct smp_ops_t core99_smp_ops = {
.message_pass = smp_mpic_message_pass,
.probe = smp_core99_probe,
.kick_cpu = smp_core99_kick_cpu,
.setup_cpu = smp_core99_setup_cpu,
.give_timebase = smp_generic_give_timebase,
.take_timebase = smp_generic_take_timebase,
};
void __init pmac_setup_smp(void)
{
smp_ops = &core99_smp_ops;
#ifdef CONFIG_HOTPLUG_CPU
smp_ops->cpu_enable = generic_cpu_enable;
smp_ops->cpu_disable = generic_cpu_disable;
smp_ops->cpu_die = generic_cpu_die;
#endif
}
arch/ppc64/kernel/pmac_time.c 已删除 100644 → 0
浏览文件 @ 35499c01
/*
* Support for periodic interrupts (100 per second) and for getting
* the current time from the RTC on Power Macintoshes.
*
* We use the decrementer register for our periodic interrupts.
*
* Paul Mackerras August 1996.
* Copyright (C) 1996 Paul Mackerras.
* Copyright (C) 2003-2005 Benjamin Herrenschmidt.
*
*/
#include <linux/config.h>
#include <linux/errno.h>
#include <linux/sched.h>
#include <linux/kernel.h>
#include <linux/param.h>
#include <linux/string.h>
#include <linux/mm.h>
#include <linux/init.h>
#include <linux/time.h>
#include <linux/adb.h>
#include <linux/pmu.h>
#include <linux/interrupt.h>
#include <linux/rtc.h>
#include <asm/sections.h>
#include <asm/prom.h>
#include <asm/system.h>
#include <asm/io.h>
#include <asm/pgtable.h>
#include <asm/machdep.h>
#include <asm/time.h>
#include <asm/nvram.h>
#include <asm/smu.h>
#undef DEBUG
#ifdef DEBUG
#define DBG(x...) printk(x)
#else
#define DBG(x...)
#endif
/* Apparently the RTC stores seconds since 1 Jan 1904 */
#define RTC_OFFSET 2082844800
/*
* Calibrate the decrementer frequency with the VIA timer 1.
*/
#define VIA_TIMER_FREQ_6 4700000 /* time 1 frequency * 6 */
extern struct timezone sys_tz;
extern void to_tm(int tim, struct rtc_time * tm);
void pmac_get_rtc_time(struct rtc_time *tm)
{
switch(sys_ctrler) {
#ifdef CONFIG_ADB_PMU
case SYS_CTRLER_PMU: {
/* TODO: Move that to a function in the PMU driver */
struct adb_request req;
unsigned int now;
if (pmu_request(&req, NULL, 1, PMU_READ_RTC) < 0)
return;
pmu_wait_complete(&req);
if (req.reply_len != 4)
printk(KERN_ERR "pmac_get_rtc_time: PMU returned a %d"
" bytes reply\n", req.reply_len);
now = (req.reply[0] << 24) + (req.reply[1] << 16)
+ (req.reply[2] << 8) + req.reply[3];
DBG("get: %u -> %u\n", (int)now, (int)(now - RTC_OFFSET));
now -= RTC_OFFSET;
to_tm(now, tm);
tm->tm_year -= 1900;
tm->tm_mon -= 1;
DBG("-> tm_mday: %d, tm_mon: %d, tm_year: %d, %d:%02d:%02d\n",
tm->tm_mday, tm->tm_mon, tm->tm_year,
tm->tm_hour, tm->tm_min, tm->tm_sec);
break;
}
#endif /* CONFIG_ADB_PMU */
#ifdef CONFIG_PMAC_SMU
case SYS_CTRLER_SMU:
smu_get_rtc_time(tm, 1);
break;
#endif /* CONFIG_PMAC_SMU */
default:
;
}
}
int pmac_set_rtc_time(struct rtc_time *tm)
{
switch(sys_ctrler) {
#ifdef CONFIG_ADB_PMU
case SYS_CTRLER_PMU: {
/* TODO: Move that to a function in the PMU driver */
struct adb_request req;
unsigned int nowtime;
DBG("set: tm_mday: %d, tm_mon: %d, tm_year: %d,"
" %d:%02d:%02d\n",
tm->tm_mday, tm->tm_mon, tm->tm_year,
tm->tm_hour, tm->tm_min, tm->tm_sec);
nowtime = mktime(tm->tm_year + 1900, tm->tm_mon + 1,
tm->tm_mday, tm->tm_hour, tm->tm_min,
tm->tm_sec);
DBG("-> %u -> %u\n", (int)nowtime,
(int)(nowtime + RTC_OFFSET));
nowtime += RTC_OFFSET;
if (pmu_request(&req, NULL, 5, PMU_SET_RTC,
nowtime >> 24, nowtime >> 16,
nowtime >> 8, nowtime) < 0)
return -ENXIO;
pmu_wait_complete(&req);
if (req.reply_len != 0)
printk(KERN_ERR "pmac_set_rtc_time: PMU returned a %d"
" bytes reply\n", req.reply_len);
return 0;
}
#endif /* CONFIG_ADB_PMU */
#ifdef CONFIG_PMAC_SMU
case SYS_CTRLER_SMU:
return smu_set_rtc_time(tm, 1);
#endif /* CONFIG_PMAC_SMU */
default:
return -ENODEV;
}
}
unsigned long __init pmac_get_boot_time(void)
{
struct rtc_time tm;
pmac_get_rtc_time(&tm);
return mktime(tm.tm_year+1900, tm.tm_mon+1, tm.tm_mday,
tm.tm_hour, tm.tm_min, tm.tm_sec);
}
/*
* Query the OF and get the decr frequency.
* FIXME: merge this with generic_calibrate_decr
*/
void __init pmac_calibrate_decr(void)
{
struct device_node *cpu;
unsigned int *fp;
/*
* The cpu node should have a timebase-frequency property
* to tell us the rate at which the decrementer counts.
*/
cpu = find_type_devices("cpu");
if (cpu == 0)
panic("can't find cpu node in time_init");
fp = (unsigned int *) get_property(cpu, "timebase-frequency", NULL);
if (fp == 0)
panic("can't get cpu timebase frequency");
ppc_tb_freq = *fp;
fp = (unsigned int *)get_property(cpu, "clock-frequency", NULL);
if (fp == 0)
panic("can't get cpu processor frequency");
ppc_proc_freq = *fp;
}
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或