- 28 9月, 2010 1 次提交
-
-
由 Juuso Oikarinen 提交于
Instead of hardcoding 11a support, enable/disable driver support based on the dual-mode-select parameter in the nvs-file general paramters. Signed-off-by: NJuuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: NLuciano Coelho <luciano.coelho@nokia.com> Signed-off-by: NLuciano Coelho <luciano.coelho@nokia.com>
-
- 10 4月, 2010 1 次提交
-
-
由 Juuso Oikarinen 提交于
This patch will add support for connection quality monitoring by configuring rssi triggers to the firmware, and enabling the firmware rssi trigger functionality. Signed-off-by: NJuuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: NTeemu Paasikivi <ext-teemu.3.paasikivi@nokia.com> Signed-off-by: NLuciano Coelho <luciano.coelho@nokia.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 07 4月, 2010 1 次提交
-
-
由 Juuso Oikarinen 提交于
Configure meaningful rates to be used with the templates. For control frames, use the determined basic rates (currently the lowest rate for the band) and for data-frames (null-funcs) let the firmware use the current rate policy to determine the rate. Signed-off-by: NJuuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: NTeemu Paasikivi <ext-teemu.3.paasikivi@nokia.com> Signed-off-by: NLuciano Coelho <luciano.coelho@nokia.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 01 4月, 2010 3 次提交
-
-
由 Juuso Oikarinen 提交于
This patch will enable the hardware keep-alive mode, configure the required template, configure keep-alive parameters, and re-order JOIN's and ACX_AID in such a way that the keep-alive is activated. Signed-off-by: NJuuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: NLuciano Coelho <luciano.coelho@nokia.com> Signed-off-by: NLuciano Coelho <luciano.coelho@nokia.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Juuso Oikarinen 提交于
Add support for keep-alive templates, which are indexed. Signed-off-by: NJuuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: NLuciano Coelho <luciano.coelho@nokia.com> Signed-off-by: NLuciano Coelho <luciano.coelho@nokia.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Juuso Oikarinen 提交于
The wl1271 does not support disabling the connection monitor feature. Perform the next best thing by increasing the beacon-loss threshold and BSS_LOSE event timeout to the maximum values. This is needed, because we really don't want any random probe-requests during scanning or especially while in ad-hoc mode and not beaconing. Signed-off-by: NJuuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: NTeemu Paasikivi <ext-teemu.3.paasikivi@nokia.com> Signed-off-by: NLuciano Coelho <luciano.coelho@nokia.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 30 3月, 2010 1 次提交
-
-
由 Tejun Heo 提交于
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: NTejun Heo <tj@kernel.org> Guess-its-ok-by: NChristoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
-
- 24 3月, 2010 2 次提交
-
-
由 Juuso Oikarinen 提交于
Add a sysfs file to control the state of the BT co-ex (enable or disable it.) By default, the BT co-ex is enabled. Signed-off-by: NJuuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: NTeemu Paasikivi <ext-teemu.3.paasikivi@nokia.com> Signed-off-by: NLuciano Coelho <luciano.coelho@nokia.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Juuso Oikarinen 提交于
Add configuration values for the varous WLAN-BT co-ex configuration parameters, and finally enable WLAN-BT co-ex. Based on preliminary measurements, it appears the co-ex feature is not increasing WLAN power consumption, if BT is not activated. Signed-off-by: NJuuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: NTeemu Paasikivi <ext-teemu.3.paasikivi@nokia.com> Signed-off-by: NLuciano Coelho <luciano.coelho@nokia.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 20 2月, 2010 3 次提交
-
-
由 Luciano Coelho 提交于
We need to configure PLT mode almost in the same way as normal mode. Most of the configuration functions need to be called also when entering PLT, with the exception of a few RX and TX configuration (which cause mac80211 warnings if enable while runnning PLT tests). Signed-off-by: NLuciano Coelho <luciano.coelho@nokia.com> Reviewed-by: NJuuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: NJuuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Kalle Valo 提交于
For WMM we need to configure each tid separately so modify wl1271_acx_tid_cfg() to take the configuration from function parameters instead. Signed-off-by: NKalle Valo <kalle.valo@nokia.com> Reviewed-by: NJuuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: NJuuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Kalle Valo 提交于
For WMM we need to configure each queue separately so modify wl1271_acx_ac_cfg() to take the configuration from function parameters instead. Signed-off-by: NKalle Valo <kalle.valo@nokia.com> Reviewed-by: NJuuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: NJuuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 29 12月, 2009 7 次提交
-
-
由 Juuso Oikarinen 提交于
This acx configures host clock parameters in correspondence with the clock request line - the settling time of the clock, and whether fast wake-up is supported. Signed-off-by: NJuuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: NLuciano Coelho <luciano.coelho@nokia.com> Signed-off-by: NLuciano Coelho <luciano.coelho@nokia.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Juuso Oikarinen 提交于
Previously, only basic rates were used for data transmission - resulting in reduced transfer rates. This patch takes enables the firmware to take advantage of the full set of data rates supported by the AP. Signed-off-by: NJuuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: NLuciano Coelho <luciano.coelho@nokia.com> Signed-off-by: NLuciano Coelho <luciano.coelho@nokia.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Juuso Oikarinen 提交于
While not associated, default the data rates to 1 and 2mbps, so that only those rates will be used for association related message transfer. Once associated, configure the full rate-set supported by the AP. Signed-off-by: NJuuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: NLuciano Coelho <luciano.coelho@nokia.com> Signed-off-by: NLuciano Coelho <luciano.coelho@nokia.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Juuso Oikarinen 提交于
Remove the smart-reflex ACX - the associated parameters are now configured in the radio parameters config. Signed-off-by: NJuuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: NLuciano Coelho <luciano.coelho@nokia.com> Signed-off-by: NLuciano Coelho <luciano.coelho@nokia.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Luciano Coelho 提交于
In the data path configuration, one of the parameters is the channel. We have been setting it to wl->channel, which is not correct in this case. This channel has nothing to do with the channel we're currently tuned to, since it is only used for calibration during this phase. Hardcoded the channel to 1, according to the reference driver. Signed-off-by: NLuciano Coelho <luciano.coelho@nokia.com> Reviewed-by: NJuuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Luciano Coelho 提交于
Newer firmwares require the dco itrim parameters to be set during initialization. This patch implements the new ACX function and calls it. Signed-off-by: NLuciano Coelho <luciano.coelho@nokia.com> Reviewed-by: NJuuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Luciano Coelho 提交于
We were using CONF_TX_RATE_MASK_ALL when calling wl1271_acx_rate_policies() during init. We should use WL1271_DEFAULT_BASIC_RATE_SET instead. The values are the same, but the latter is just the correct macro to use. Signed-off-by: NLuciano Coelho <luciano.coelho@nokia.com> Reviewed-by: NJuuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 29 11月, 2009 3 次提交
-
-
由 Luciano Coelho 提交于
We were ignoring the -EIO return value from wl1271_cmd_radio_params() and wl1271_cmd_general_params(), because they were always returning an error and we didn't know why. Now this has been fixed, so the workaround can be removed. Signed-off-by: NLuciano Coelho <luciano.coelho@nokia.com> Reviewed-by: NJuuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Luciano Coelho 提交于
We were missing the command header in the radio and general parameters commands. This was causing them to fail, resulting in problems in the power levels and other PLT-related commands. Also reorganized the command functions, moving from wl1271_init.c to wl1271_cmd.c where it fits better. Signed-off-by: NLuciano Coelho <luciano.coelho@nokia.com> Reviewed-by: NJuuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Luciano Coelho 提交于
We need to set the radio and general parameters when starting PLT mode. This patch adds calls to TEST_CMD_INI_RADIO_PARAMS and TEST_CMD_INIT_GENERAL_PARAMS when initializing PLT mode. Signed-off-by: NLuciano Coelho <luciano.coelho@nokia.com> Reviewed-by: NJuuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 03 11月, 2009 1 次提交
-
-
由 Juuso Oikarinen 提交于
Check the result code of all commands, and return an error code if the firmware reports an error in execution. Previously this error would go ignored in most cases. Signed-off-by: NJuuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: NLuciano Coelho <luciano.coelho@nokia.com> Signed-off-by: NLuciano Coelho <luciano.coelho@nokia.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 28 10月, 2009 12 次提交
-
-
由 Teemu Paasikivi 提交于
Added support to scan 802.11a access points on 5 GHz band when using wl1273 chip. Signed-off-by: NTeemu Paasikivi <ext-teemu.3.paasikivi@nokia.com> Reviewed-by: NJuuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: NLuciano Coelho <luciano.coelho@nokia.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Juuso Oikarinen 提交于
Disable IRQ's after FW initialization failure - originally this was not done in all cases, and it resulted in a kernel warning if firmware initialization was tried again without reboot. Signed-off-by: NJuuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: NLuciano Coelho <luciano.coelho@nokia.com> Signed-off-by: NLuciano Coelho <luciano.coelho@nokia.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Juuso Oikarinen 提交于
Add a configuration structure for RX path parameters, and set default configuration values there. Signed-off-by: NJuuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: NLuciano Coelho <luciano.coelho@nokia.com> Signed-off-by: NLuciano Coelho <luciano.coelho@nokia.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Juuso Oikarinen 提交于
Add a configuration structure for TX path parameters, and set defalt configuration values there. Signed-off-by: NJuuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: NLuciano Coelho <luciano.coelho@nokia.com> Signed-off-by: NLuciano Coelho <luciano.coelho@nokia.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Juuso Oikarinen 提交于
Add a configuration structure for RX path parameters, and set default configuration values there. Signed-off-by: NJuuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: NLuciano Coelho <luciano.coelho@nokia.com> Signed-off-by: NLuciano Coelho <luciano.coelho@nokia.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Juuso Oikarinen 提交于
If the 38.4MHz reference clock is configured to the firmware, it crashes on boot. Configuring an experimental 38.4MHz in XTAL mode allows the firmware to boot, and everything appears to work. Signed-off-by: NJuuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: NLuciano Coelho <luciano.coelho@nokia.com> Signed-off-by: NLuciano Coelho <luciano.coelho@nokia.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Juuso Oikarinen 提交于
Update the magic values of the wl1271 boot time config according to the new reference driver. Signed-off-by: NJuuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: NLuciano Coelho <luciano.coelho@nokia.com> Signed-off-by: NLuciano Coelho <luciano.coelho@nokia.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Juuso Oikarinen 提交于
Enable and configure smart reflex. This should have a reducing impact on power consumption. Signed-off-by: NJuuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: NLuciano Coelho <luciano.coelho@nokia.com> Signed-off-by: NLuciano Coelho <luciano.coelho@nokia.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Juuso Oikarinen 提交于
Enable beacon filtering when PSM is enabled Signed-off-by: NJuuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: NLuciano Coelho <luciano.coelho@nokia.com> Signed-off-by: NLuciano Coelho <luciano.coelho@nokia.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Juuso Oikarinen 提交于
Add configuration for connection monitor (number of allowed beacons, and timeout after last received beacon.) Signed-off-by: NJuuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: NLuciano Coelho <luciano.coelho@nokia.com> Signed-off-by: NLuciano Coelho <luciano.coelho@nokia.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Juuso Oikarinen 提交于
Enable multicast filtering. This way by default no multicast frames will reach the host, and when needed, only required multicast frames can be passed from the WLAN chipset to the host. Signed-off-by: NJuuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: NLuciano Coelho <luciano.coelho@nokia.com> Signed-off-by: NLuciano Coelho <luciano.coelho@nokia.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Juuso Oikarinen 提交于
Configure the rate policies to the firmware based on the rates given by the AP. Signed-off-by: NJuuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: NLuciano Coelho <luciano.coelho@nokia.com> Signed-off-by: NLuciano Coelho <luciano.coelho@nokia.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 14 8月, 2009 1 次提交
-
-
由 Luciano Coelho 提交于
This driver supports the wl1271 chipset from Texas Instruments based on the WiLink(tm) 6.0 mobile platform. Support for wl1273 should be relatively easy to add. This chipset is designed for embedded devices, with good powersaving capabilities. The wl1271 chipset is the successor of wl1251 and supports the 802.11b/g/n standards, but currently this driver supports only b/g. More information about this chipset can be found here: http://focus.ti.com/general/docs/wtbu/wtbuproductcontent.tsp?templateId=6123&navigationId=12762&contentId=29993Signed-off-by: NLuciano Coelho <luciano.coelho@nokia.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-