wl1271: fix radio and general parameters commands

We were missing the command header in the radio and general parameters
commands.  This was causing them to fail, resulting in problems in the power
levels and other PLT-related commands.

Also reorganized the command functions, moving from wl1271_init.c to
wl1271_cmd.c where it fits better.
Signed-off-by: NLuciano Coelho <luciano.coelho@nokia.com>
Reviewed-by: NJuuso Oikarinen <juuso.oikarinen@nokia.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

drivers/net/wireless/wl12xx/wl1271_cmd.c

@@ -188,6 +188,113 @@ static int wl1271_cmd_cal(struct wl1271 *wl)
 	return ret;
 }
 
+int wl1271_cmd_general_parms(struct wl1271 *wl)
+{
+	struct wl1271_general_parms_cmd *gen_parms;
+	struct conf_general_parms *g = &wl->conf.init.genparam;
+	int ret;
+
+	gen_parms = kzalloc(sizeof(*gen_parms), GFP_KERNEL);
+	if (!gen_parms)
+		return -ENOMEM;
+
+	gen_parms->test.id = TEST_CMD_INI_FILE_GENERAL_PARAM;
+
+	gen_parms->ref_clk = g->ref_clk;
+	gen_parms->settling_time = g->settling_time;
+	gen_parms->clk_valid_on_wakeup = g->clk_valid_on_wakeup;
+	gen_parms->dc2dcmode = g->dc2dcmode;
+	gen_parms->single_dual_band = g->single_dual_band;
+	gen_parms->tx_bip_fem_autodetect = g->tx_bip_fem_autodetect;
+	gen_parms->tx_bip_fem_manufacturer = g->tx_bip_fem_manufacturer;
+	gen_parms->settings = g->settings;
+
+	ret = wl1271_cmd_test(wl, gen_parms, sizeof(*gen_parms), 0);
+	if (ret < 0)
+		wl1271_warning("CMD_INI_FILE_GENERAL_PARAM failed");
+
+	kfree(gen_parms);
+	return ret;
+}
+
+int wl1271_cmd_radio_parms(struct wl1271 *wl)
+{
+	struct wl1271_radio_parms_cmd *radio_parms;
+	struct conf_radio_parms *r = &wl->conf.init.radioparam;
+	int i, ret;
+
+	radio_parms = kzalloc(sizeof(*radio_parms), GFP_KERNEL);
+	if (!radio_parms)
+		return -ENOMEM;
+
+	radio_parms->test.id = TEST_CMD_INI_FILE_RADIO_PARAM;
+
+	/* Static radio parameters */
+	radio_parms->rx_trace_loss = r->rx_trace_loss;
+	radio_parms->tx_trace_loss = r->tx_trace_loss;
+	memcpy(radio_parms->rx_rssi_and_proc_compens,
+	       r->rx_rssi_and_proc_compens,
+	       CONF_RSSI_AND_PROCESS_COMPENSATION_SIZE);
+
+	memcpy(radio_parms->rx_trace_loss_5, r->rx_trace_loss_5,
+	       CONF_NUMBER_OF_SUB_BANDS_5);
+	memcpy(radio_parms->tx_trace_loss_5, r->tx_trace_loss_5,
+	       CONF_NUMBER_OF_SUB_BANDS_5);
+	memcpy(radio_parms->rx_rssi_and_proc_compens_5,
+	       r->rx_rssi_and_proc_compens_5,
+	       CONF_RSSI_AND_PROCESS_COMPENSATION_SIZE);
+
+	/* Dynamic radio parameters */
+	radio_parms->tx_ref_pd_voltage = cpu_to_le16(r->tx_ref_pd_voltage);
+	radio_parms->tx_ref_power = r->tx_ref_power;
+	radio_parms->tx_offset_db = r->tx_offset_db;
+
+	memcpy(radio_parms->tx_rate_limits_normal, r->tx_rate_limits_normal,
+	       CONF_NUMBER_OF_RATE_GROUPS);
+	memcpy(radio_parms->tx_rate_limits_degraded, r->tx_rate_limits_degraded,
+	       CONF_NUMBER_OF_RATE_GROUPS);
+
+	memcpy(radio_parms->tx_channel_limits_11b, r->tx_channel_limits_11b,
+	       CONF_NUMBER_OF_CHANNELS_2_4);
+	memcpy(radio_parms->tx_channel_limits_ofdm, r->tx_channel_limits_ofdm,
+	       CONF_NUMBER_OF_CHANNELS_2_4);
+	memcpy(radio_parms->tx_pdv_rate_offsets, r->tx_pdv_rate_offsets,
+	       CONF_NUMBER_OF_RATE_GROUPS);
+	memcpy(radio_parms->tx_ibias, r->tx_ibias, CONF_NUMBER_OF_RATE_GROUPS);
+
+	radio_parms->rx_fem_insertion_loss = r->rx_fem_insertion_loss;
+
+	for (i = 0; i < CONF_NUMBER_OF_SUB_BANDS_5; i++)
+		radio_parms->tx_ref_pd_voltage_5[i] =
+			cpu_to_le16(r->tx_ref_pd_voltage_5[i]);
+	memcpy(radio_parms->tx_ref_power_5, r->tx_ref_power_5,
+	       CONF_NUMBER_OF_SUB_BANDS_5);
+	memcpy(radio_parms->tx_offset_db_5, r->tx_offset_db_5,
+	       CONF_NUMBER_OF_SUB_BANDS_5);
+	memcpy(radio_parms->tx_rate_limits_normal_5,
+	       r->tx_rate_limits_normal_5, CONF_NUMBER_OF_RATE_GROUPS);
+	memcpy(radio_parms->tx_rate_limits_degraded_5,
+	       r->tx_rate_limits_degraded_5, CONF_NUMBER_OF_RATE_GROUPS);
+	memcpy(radio_parms->tx_channel_limits_ofdm_5,
+	       r->tx_channel_limits_ofdm_5, CONF_NUMBER_OF_CHANNELS_5);
+	memcpy(radio_parms->tx_pdv_rate_offsets_5, r->tx_pdv_rate_offsets_5,
+	       CONF_NUMBER_OF_RATE_GROUPS);
+	memcpy(radio_parms->tx_ibias_5, r->tx_ibias_5,
+	       CONF_NUMBER_OF_RATE_GROUPS);
+	memcpy(radio_parms->rx_fem_insertion_loss_5,
+	       r->rx_fem_insertion_loss_5, CONF_NUMBER_OF_SUB_BANDS_5);
+
+	wl1271_dump(DEBUG_CMD, "TEST_CMD_INI_FILE_RADIO_PARAM: ",
+		    radio_parms, sizeof(*radio_parms));
+
+	ret = wl1271_cmd_test(wl, radio_parms, sizeof(*radio_parms), 0);
+	if (ret < 0)
+		wl1271_warning("CMD_INI_FILE_RADIO_PARAM failed");
+
+	kfree(radio_parms);
+	return ret;
+}
+
 int wl1271_cmd_join(struct wl1271 *wl)
 {
 	static bool do_cal = true;

drivers/net/wireless/wl12xx/wl1271_cmd.h

@@ -31,6 +31,8 @@ struct acx_header;
 
 int wl1271_cmd_send(struct wl1271 *wl, u16 id, void *buf, size_t len,
 		    size_t res_len);
+int wl1271_cmd_general_parms(struct wl1271 *wl);
+int wl1271_cmd_radio_parms(struct wl1271 *wl);
 int wl1271_cmd_join(struct wl1271 *wl);
 int wl1271_cmd_test(struct wl1271 *wl, void *buf, size_t buf_len, u8 answer);
 int wl1271_cmd_interrogate(struct wl1271 *wl, u16 id, void *buf, size_t len);
@@ -418,6 +420,76 @@ enum wl1271_channel_tune_bands {
 #define TEST_CMD_P2G_CAL                   0x02
 #define TEST_CMD_CHANNEL_TUNE              0x0d
 #define TEST_CMD_UPDATE_PD_REFERENCE_POINT 0x1d
+#define TEST_CMD_INI_FILE_RADIO_PARAM      0x19
+#define TEST_CMD_INI_FILE_GENERAL_PARAM    0x1E
+
+struct wl1271_general_parms_cmd {
+	struct wl1271_cmd_header header;
+
+	struct wl1271_cmd_test_header test;
+
+	u8 ref_clk;
+	u8 settling_time;
+	u8 clk_valid_on_wakeup;
+	u8 dc2dcmode;
+	u8 single_dual_band;
+
+	u8 tx_bip_fem_autodetect;
+	u8 tx_bip_fem_manufacturer;
+	u8 settings;
+} __attribute__ ((packed));
+
+struct wl1271_radio_parms_cmd {
+	struct wl1271_cmd_header header;
+
+	struct wl1271_cmd_test_header test;
+
+	/* Static radio parameters */
+	/* 2.4GHz */
+	u8 rx_trace_loss;
+	u8 tx_trace_loss;
+	s8 rx_rssi_and_proc_compens[CONF_RSSI_AND_PROCESS_COMPENSATION_SIZE];
+
+	/* 5GHz */
+	u8 rx_trace_loss_5[CONF_NUMBER_OF_SUB_BANDS_5];
+	u8 tx_trace_loss_5[CONF_NUMBER_OF_SUB_BANDS_5];
+	s8 rx_rssi_and_proc_compens_5[CONF_RSSI_AND_PROCESS_COMPENSATION_SIZE];
+
+	/* Dynamic radio parameters */
+	/* 2.4GHz */
+	__le16 tx_ref_pd_voltage;
+	s8  tx_ref_power;
+	s8  tx_offset_db;
+
+	s8  tx_rate_limits_normal[CONF_NUMBER_OF_RATE_GROUPS];
+	s8  tx_rate_limits_degraded[CONF_NUMBER_OF_RATE_GROUPS];
+
+	s8  tx_channel_limits_11b[CONF_NUMBER_OF_CHANNELS_2_4];
+	s8  tx_channel_limits_ofdm[CONF_NUMBER_OF_CHANNELS_2_4];
+	s8  tx_pdv_rate_offsets[CONF_NUMBER_OF_RATE_GROUPS];
+
+	u8  tx_ibias[CONF_NUMBER_OF_RATE_GROUPS];
+	u8  rx_fem_insertion_loss;
+
+	u8 padding2;
+
+	/* 5GHz */
+	__le16 tx_ref_pd_voltage_5[CONF_NUMBER_OF_SUB_BANDS_5];
+	s8  tx_ref_power_5[CONF_NUMBER_OF_SUB_BANDS_5];
+	s8  tx_offset_db_5[CONF_NUMBER_OF_SUB_BANDS_5];
+
+	s8  tx_rate_limits_normal_5[CONF_NUMBER_OF_RATE_GROUPS];
+	s8  tx_rate_limits_degraded_5[CONF_NUMBER_OF_RATE_GROUPS];
+
+	s8  tx_channel_limits_ofdm_5[CONF_NUMBER_OF_CHANNELS_5];
+	s8  tx_pdv_rate_offsets_5[CONF_NUMBER_OF_RATE_GROUPS];
+
+	/* FIXME: this is inconsistent with the types for 2.4GHz */
+	s8  tx_ibias_5[CONF_NUMBER_OF_RATE_GROUPS];
+	s8  rx_fem_insertion_loss_5[CONF_NUMBER_OF_SUB_BANDS_5];
+
+	u8 padding3[2];
+} __attribute__ ((packed));
 
 struct wl1271_cmd_cal_channel_tune {
 	struct wl1271_cmd_header header;

drivers/net/wireless/wl12xx/wl1271_init.c

@@ -193,112 +193,6 @@ static int wl1271_init_beacon_broadcast(struct wl1271 *wl)
 	return 0;
 }
 
-int wl1271_init_general_parms(struct wl1271 *wl)
-{
-	struct wl1271_general_parms *gen_parms;
-	struct conf_general_parms *g = &wl->conf.init.genparam;
-	int ret;
-
-	gen_parms = kzalloc(sizeof(*gen_parms), GFP_KERNEL);
-	if (!gen_parms)
-		return -ENOMEM;
-
-	gen_parms->id = TEST_CMD_INI_FILE_GENERAL_PARAM;
-
-	gen_parms->ref_clk = g->ref_clk;
-	gen_parms->settling_time = g->settling_time;
-	gen_parms->clk_valid_on_wakeup = g->clk_valid_on_wakeup;
-	gen_parms->dc2dcmode = g->dc2dcmode;
-	gen_parms->single_dual_band = g->single_dual_band;
-	gen_parms->tx_bip_fem_autodetect = g->tx_bip_fem_autodetect;
-	gen_parms->tx_bip_fem_manufacturer = g->tx_bip_fem_manufacturer;
-	gen_parms->settings = g->settings;
-
-	ret = wl1271_cmd_test(wl, gen_parms, sizeof(*gen_parms), 0);
-	if (ret < 0) {
-		wl1271_warning("CMD_INI_FILE_GENERAL_PARAM failed");
-		return ret;
-	}
-
-	kfree(gen_parms);
-	return 0;
-}
-
-int wl1271_init_radio_parms(struct wl1271 *wl)
-{
-	struct wl1271_radio_parms *radio_parms;
-	struct conf_radio_parms *r = &wl->conf.init.radioparam;
-	int i, ret;
-
-	radio_parms = kzalloc(sizeof(*radio_parms), GFP_KERNEL);
-	if (!radio_parms)
-		return -ENOMEM;
-
-	radio_parms->id = TEST_CMD_INI_FILE_RADIO_PARAM;
-
-	/* Static radio parameters */
-	radio_parms->rx_trace_loss = r->rx_trace_loss;
-	radio_parms->tx_trace_loss = r->tx_trace_loss;
-	memcpy(radio_parms->rx_rssi_and_proc_compens,
-	       r->rx_rssi_and_proc_compens,
-	       CONF_RSSI_AND_PROCESS_COMPENSATION_SIZE);
-
-	memcpy(radio_parms->rx_trace_loss_5, r->rx_trace_loss_5,
-	       CONF_NUMBER_OF_SUB_BANDS_5);
-	memcpy(radio_parms->tx_trace_loss_5, r->tx_trace_loss_5,
-	       CONF_NUMBER_OF_SUB_BANDS_5);
-	memcpy(radio_parms->rx_rssi_and_proc_compens_5,
-	       r->rx_rssi_and_proc_compens_5,
-	       CONF_RSSI_AND_PROCESS_COMPENSATION_SIZE);
-
-	/* Dynamic radio parameters */
-	radio_parms->tx_ref_pd_voltage = cpu_to_le16(r->tx_ref_pd_voltage);
-	radio_parms->tx_ref_power = r->tx_ref_power;
-	radio_parms->tx_offset_db = r->tx_offset_db;
-
-	memcpy(radio_parms->tx_rate_limits_normal, r->tx_rate_limits_normal,
-	       CONF_NUMBER_OF_RATE_GROUPS);
-	memcpy(radio_parms->tx_rate_limits_degraded, r->tx_rate_limits_degraded,
-	       CONF_NUMBER_OF_RATE_GROUPS);
-
-	memcpy(radio_parms->tx_channel_limits_11b, r->tx_channel_limits_11b,
-	       CONF_NUMBER_OF_CHANNELS_2_4);
-	memcpy(radio_parms->tx_channel_limits_ofdm, r->tx_channel_limits_ofdm,
-	       CONF_NUMBER_OF_CHANNELS_2_4);
-	memcpy(radio_parms->tx_pdv_rate_offsets, r->tx_pdv_rate_offsets,
-	       CONF_NUMBER_OF_RATE_GROUPS);
-	memcpy(radio_parms->tx_ibias, r->tx_ibias, CONF_NUMBER_OF_RATE_GROUPS);
-
-	radio_parms->rx_fem_insertion_loss = r->rx_fem_insertion_loss;
-
-	for (i = 0; i < CONF_NUMBER_OF_SUB_BANDS_5; i++)
-		radio_parms->tx_ref_pd_voltage_5[i] =
-			cpu_to_le16(r->tx_ref_pd_voltage_5[i]);
-	memcpy(radio_parms->tx_ref_power_5, r->tx_ref_power_5,
-	       CONF_NUMBER_OF_SUB_BANDS_5);
-	memcpy(radio_parms->tx_offset_db_5, r->tx_offset_db_5,
-	       CONF_NUMBER_OF_SUB_BANDS_5);
-	memcpy(radio_parms->tx_rate_limits_normal_5,
-	       r->tx_rate_limits_normal_5, CONF_NUMBER_OF_RATE_GROUPS);
-	memcpy(radio_parms->tx_rate_limits_degraded_5,
-	       r->tx_rate_limits_degraded_5, CONF_NUMBER_OF_RATE_GROUPS);
-	memcpy(radio_parms->tx_channel_limits_ofdm_5,
-	       r->tx_channel_limits_ofdm_5, CONF_NUMBER_OF_CHANNELS_5);
-	memcpy(radio_parms->tx_pdv_rate_offsets_5, r->tx_pdv_rate_offsets_5,
-	       CONF_NUMBER_OF_RATE_GROUPS);
-	memcpy(radio_parms->tx_ibias_5, r->tx_ibias_5,
-	       CONF_NUMBER_OF_RATE_GROUPS);
-	memcpy(radio_parms->rx_fem_insertion_loss_5,
-	       r->rx_fem_insertion_loss_5, CONF_NUMBER_OF_SUB_BANDS_5);
-
-	ret = wl1271_cmd_test(wl, radio_parms, sizeof(*radio_parms), 0);
-	if (ret < 0)
-		wl1271_warning("CMD_INI_FILE_RADIO_PARAM failed");
-
-	kfree(radio_parms);
-	return ret;
-}
-
 int wl1271_hw_init(struct wl1271 *wl)
 {
 	int ret;
@@ -306,11 +200,11 @@ int wl1271_hw_init(struct wl1271 *wl)
 	/* FIXME: the following parameter setting functions return error
 	 * codes - the reason is so far unknown. The -EIO is therefore
 	 * ignored for the time being. */
-	ret = wl1271_init_general_parms(wl);
+	ret = wl1271_cmd_general_parms(wl);
 	if (ret < 0 && ret != -EIO)
 		return ret;
 
-	ret = wl1271_init_radio_parms(wl);
+	ret = wl1271_cmd_radio_parms(wl);
 	if (ret < 0 && ret != -EIO)
 		return ret;
 

drivers/net/wireless/wl12xx/wl1271_init.h

@@ -28,77 +28,5 @@
 
 int wl1271_hw_init_power_auth(struct wl1271 *wl);
 int wl1271_hw_init(struct wl1271 *wl);
-int wl1271_init_general_parms(struct wl1271 *wl);
-int wl1271_init_radio_parms(struct wl1271 *wl);
-
-/* These are not really a TEST_CMD, but the ref driver uses them as such */
-#define TEST_CMD_INI_FILE_RADIO_PARAM   0x19
-#define TEST_CMD_INI_FILE_GENERAL_PARAM 0x1E
-
-struct wl1271_general_parms {
-	u8 id;
-	u8 padding[3];
-
-	u8 ref_clk;
-	u8 settling_time;
-	u8 clk_valid_on_wakeup;
-	u8 dc2dcmode;
-	u8 single_dual_band;
-
-	u8 tx_bip_fem_autodetect;
-	u8 tx_bip_fem_manufacturer;
-	u8 settings;
-} __attribute__ ((packed));
-
-struct wl1271_radio_parms {
-	u8 id;
-	u8 padding[3];
-
-	/* Static radio parameters */
-	/* 2.4GHz */
-	u8 rx_trace_loss;
-	u8 tx_trace_loss;
-	s8 rx_rssi_and_proc_compens[CONF_RSSI_AND_PROCESS_COMPENSATION_SIZE];
-
-	/* 5GHz */
-	u8 rx_trace_loss_5[CONF_NUMBER_OF_SUB_BANDS_5];
-	u8 tx_trace_loss_5[CONF_NUMBER_OF_SUB_BANDS_5];
-	s8 rx_rssi_and_proc_compens_5[CONF_RSSI_AND_PROCESS_COMPENSATION_SIZE];
-
-	/* Dynamic radio parameters */
-	/* 2.4GHz */
-	__le16 tx_ref_pd_voltage;
-	s8  tx_ref_power;
-	s8  tx_offset_db;
-
-	s8  tx_rate_limits_normal[CONF_NUMBER_OF_RATE_GROUPS];
-	s8  tx_rate_limits_degraded[CONF_NUMBER_OF_RATE_GROUPS];
-
-	s8  tx_channel_limits_11b[CONF_NUMBER_OF_CHANNELS_2_4];
-	s8  tx_channel_limits_ofdm[CONF_NUMBER_OF_CHANNELS_2_4];
-	s8  tx_pdv_rate_offsets[CONF_NUMBER_OF_RATE_GROUPS];
-
-	u8  tx_ibias[CONF_NUMBER_OF_RATE_GROUPS];
-	u8  rx_fem_insertion_loss;
-
-	u8 padding2;
-
-	/* 5GHz */
-	__le16 tx_ref_pd_voltage_5[CONF_NUMBER_OF_SUB_BANDS_5];
-	s8  tx_ref_power_5[CONF_NUMBER_OF_SUB_BANDS_5];
-	s8  tx_offset_db_5[CONF_NUMBER_OF_SUB_BANDS_5];
-
-	s8  tx_rate_limits_normal_5[CONF_NUMBER_OF_RATE_GROUPS];
-	s8  tx_rate_limits_degraded_5[CONF_NUMBER_OF_RATE_GROUPS];
-
-	s8  tx_channel_limits_ofdm_5[CONF_NUMBER_OF_CHANNELS_5];
-	s8  tx_pdv_rate_offsets_5[CONF_NUMBER_OF_RATE_GROUPS];
-
-	/* FIXME: this is inconsistent with the types for 2.4GHz */
-	s8  tx_ibias_5[CONF_NUMBER_OF_RATE_GROUPS];
-	s8  rx_fem_insertion_loss_5[CONF_NUMBER_OF_SUB_BANDS_5];
-
-	u8 padding3[2];
-} __attribute__ ((packed));
 
 #endif

drivers/net/wireless/wl12xx/wl1271_main.c

@@ -357,11 +357,11 @@ static int wl1271_plt_init(struct wl1271 *wl)
 	/* FIXME: the following parameter setting functions return error
 	 * codes - the reason is so far unknown. The -EIO is therefore
 	 * ignored for the time being. */
-	ret = wl1271_init_general_parms(wl);
+	ret = wl1271_cmd_general_parms(wl);
 	if (ret < 0 && ret != -EIO)
 		return ret;
 
-	ret = wl1271_init_radio_parms(wl);
+	ret = wl1271_cmd_radio_parms(wl);
 	if (ret < 0 && ret != -EIO)
 		return ret;