commit ec1587d5073f29820e358f3a383850d61601d981 upstream.

When the machine is booted in VGA mode, loading sm712fb would cause
a glitch of random pixels shown on the screen. To prevent it from
happening, we first clear the entire framebuffer, and we also need
to stop calling smtcfb_setmode() during initialization, the fbdev
layer will call it for us later when it's ready.
Signed-off-by: NYifeng Li <tomli@tomli.me>
Tested-by: NSudip Mukherjee <sudipm.mukherjee@gmail.com>
Cc: Teddy Wang <teddy.wang@siliconmotion.com>
Cc: <stable@vger.kernel.org>  # v4.4+
Signed-off-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 8069053880e0ee3a75fd6d7e0a30293265fe3de4 upstream.

On a Thinkpad s30 (Pentium III / i440MX, Lynx3DM), rebooting with
sm712fb framebuffer driver would cause a white screen of death on
the next POST, presumably the proper timings for the LCD panel was
not reprogrammed properly by the BIOS.

Experiments showed a few CRTC Scratch Registers, including CRT3D,
CRT3E and CRT3F may be used internally by BIOS as some flags. CRT3B is
a hardware testing register, we shouldn't mess with it. CRT3C has
blanking signal and line compare control, which is not needed for this
driver.

Stop writing to CR3B-CR3F (a.k.a CRT3B-CRT3F) registers. Even if these
registers don't have side-effect on other systems, writing to them is
also highly questionable.
Signed-off-by: NYifeng Li <tomli@tomli.me>
Tested-by: NSudip Mukherjee <sudipm.mukherjee@gmail.com>
Cc: Teddy Wang <teddy.wang@siliconmotion.com>
Cc: <stable@vger.kernel.org>  # v4.4+
Signed-off-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit dcf9070595e100942c539e229dde4770aaeaa4e9 upstream.

On a Thinkpad s30 (Pentium III / i440MX, Lynx3DM), the amount of Video
RAM is not detected correctly by the xf86-video-siliconmotion driver.
This is because sm712fb overwrites the GPR71 Scratch Pad Register, which
is set by BIOS on x86 and used to indicate amount of VRAM.

Other Scratch Pad Registers, including GPR70/74/75, don't have the same
side-effect, but overwriting to them is still questionable, as they are
not related to modesetting.

Stop writing to SR70/71/74/75 (a.k.a GPR70/71/74/75).
Signed-off-by: NYifeng Li <tomli@tomli.me>
Tested-by: NSudip Mukherjee <sudipm.mukherjee@gmail.com>
Cc: Teddy Wang <teddy.wang@siliconmotion.com>
Cc: <stable@vger.kernel.org>  # v4.4+
Signed-off-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 5481115e25e42b9215f2619452aa99c95f08492f upstream.

On a Thinkpad s30 (Pentium III / i440MX, Lynx3DM), rebooting with
sm712fb framebuffer driver would cause the role of brightness up/down
button to swap.

Experiments showed the FPR30 register caused this behavior. Moreover,
even if this register don't have side-effect on other systems, over-
writing it is also highly questionable, since it was originally
configurated by the motherboard manufacturer by hardwiring pull-down
resistors to indicate the type of LCD panel. We should not mess with
it.

Stop writing to the SR30 (a.k.a FPR30) register.
Signed-off-by: NYifeng Li <tomli@tomli.me>
Tested-by: NSudip Mukherjee <sudipm.mukherjee@gmail.com>
Cc: Teddy Wang <teddy.wang@siliconmotion.com>
Cc: <stable@vger.kernel.org>  # v4.4+
Signed-off-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit f8585539df0a1527c78b5d760665c89fe1c105a9 upstream.

The following commit:

  38ac0287 ("fbdev/efifb: Honour UEFI memory map attributes when mapping the FB")

updated the EFI framebuffer code to use memory mappings for the linear
framebuffer that are permitted by the memory attributes described by the
EFI memory map for the particular region, if the framebuffer happens to
be covered by the EFI memory map (which is typically only the case for
framebuffers in shared memory). This is required since non-x86 systems
may require cacheable attributes for memory mappings that are shared
with other masters (such as GPUs), and this information cannot be
described by the Graphics Output Protocol (GOP) EFI protocol itself,
and so we rely on the EFI memory map for this.

As reported by James, this breaks some x86 systems:

  [ 1.173368] efifb: probing for efifb
  [ 1.173386] efifb: abort, cannot remap video memory 0x1d5000 @ 0xcf800000
  [ 1.173395] Trying to free nonexistent resource <00000000cf800000-00000000cf9d4bff>
  [ 1.173413] efi-framebuffer: probe of efi-framebuffer.0 failed with error -5

The problem turns out to be that the memory map entry that describes the
framebuffer has no memory attributes listed at all, and so we end up with
a mem_flags value of 0x0.

So work around this by ensuring that the memory map entry's attribute field
has a sane value before using it to mask the set of usable attributes.
Reported-by: NJames Hilliard <james.hilliard1@gmail.com>
Tested-by: NJames Hilliard <james.hilliard1@gmail.com>
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Cc: <stable@vger.kernel.org> # v4.19+
Cc: Borislav Petkov <bp@alien8.de>
Cc: James Morse <james.morse@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Peter Jones <pjones@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Fixes: 38ac0287 ("fbdev/efifb: Honour UEFI memory map attributes when ...")
Link: http://lkml.kernel.org/r/20190516213159.3530-2-ard.biesheuvel@linaro.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 8ea58f1e8b11cca3087b294779bf5959bf89cc10 upstream.

Currently, this Makefile hardcodes GNU ar, meaning that if it is not
available, there is no way to supply a different one and the build will
fail.

  $ make AR=llvm-ar CC=clang LD=ld.lld HOSTAR=llvm-ar HOSTCC=clang \
         HOSTLD=ld.lld HOSTLDFLAGS=-fuse-ld=lld defconfig modules_prepare
  ...
    AR       /out/tools/objtool/libsubcmd.a
  /bin/sh: 1: ar: not found
  ...

Follow the logic of HOST{CC,LD} and allow the user to specify a
different ar tool via HOSTAR (which is used elsewhere in other
tools/ Makefiles).
Signed-off-by: NNathan Chancellor <natechancellor@gmail.com>
Signed-off-by: NJosh Poimboeuf <jpoimboe@redhat.com>
Reviewed-by: NNick Desaulniers <ndesaulniers@google.com>
Reviewed-by: NMukesh Ojha <mojha@codeaurora.org>
Cc: <stable@vger.kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/80822a9353926c38fd7a152991c6292491a9d0e8.1558028966.git.jpoimboe@redhat.com
Link: https://github.com/ClangBuiltLinux/linux/issues/481Signed-off-by: NIngo Molnar <mingo@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 1b1f01b653b408ebe58fec78c566d1075d285c64 upstream.

arch/mips/kernel/perf_event_mipsxx.c: In function 'mipsxx_pmu_enable_event':
arch/mips/kernel/perf_event_mipsxx.c:326:21: error: unused variable 'event' [-Werror=unused-variable]
  struct perf_event *event = container_of(evt, struct perf_event, hw);
                     ^~~~~

Fix this by making use of IS_ENABLED() to simplify the code and avoid
unnecessary ifdefery.

Fixes: 84002c88 ("MIPS: perf: Fix perf with MT counting other threads")
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NPaul Burton <paul.burton@mips.com>
Cc: linux-mips@linux-mips.org
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: linux-kernel@vger.kernel.org
Cc: linux-mips@vger.kernel.org
Cc: stable@vger.kernel.org # v4.18+
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 1b6599a9d8e6c9f7e9b0476012383b1777f7fc93 upstream.

The sample timestamp is updated to ensure that the timestamp represents
the time of the sample and not a branch that the decoder is still
walking towards. The sample timestamp is updated when the decoder
returns, but the decoder does not return for non-taken branches. Update
the sample timestamp then also.

Note that commit 3f04d98e ("perf intel-pt: Improve sample
timestamp") was also a stable fix and appears, for example, in v4.4
stable tree as commit a4ebb58fd124 ("perf intel-pt: Improve sample
timestamp").
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: stable@vger.kernel.org # v4.4+
Fixes: 3f04d98e ("perf intel-pt: Improve sample timestamp")
Link: http://lkml.kernel.org/r/20190510124143.27054-4-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 61b6e08dc8e3ea80b7485c9b3f875ddd45c8466b upstream.

The decoder uses its current timestamp in samples. Usually that is a
timestamp that has already passed, but in some cases it is a timestamp
for a branch that the decoder is walking towards, and consequently
hasn't reached.

The intel_pt_sample_time() function decides which is which, but was not
handling TNT packets exactly correctly.

In the case of TNT, the timestamp applies to the first branch, so the
decoder must first walk to that branch.

That means intel_pt_sample_time() should return true for TNT, and this
patch makes that change. However, if the first branch is a non-taken
branch (i.e. a 'N'), then intel_pt_sample_time() needs to return false
for subsequent taken branches in the same TNT packet.

To handle that, introduce a new state INTEL_PT_STATE_TNT_CONT to
distinguish the cases.

Note that commit 3f04d98e ("perf intel-pt: Improve sample
timestamp") was also a stable fix and appears, for example, in v4.4
stable tree as commit a4ebb58fd124 ("perf intel-pt: Improve sample
timestamp").
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: stable@vger.kernel.org # v4.4+
Fixes: 3f04d98e ("perf intel-pt: Improve sample timestamp")
Link: http://lkml.kernel.org/r/20190510124143.27054-3-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 7ba8fa20e26eb3c0c04d747f7fd2223694eac4d5 upstream.

The timestamp used to determine if an instruction sample is made, is an
estimate based on the number of instructions since the last known
timestamp. A consequence is that it might go backwards, which results in
extra samples. Change it so that a sample is only made when the
timestamp goes forwards.

Note this does not affect a sampling period of 0 or sampling periods
specified as a count of instructions.

Example:

 Before:

 $ perf script --itrace=i10us
 ls 13812 [003] 2167315.222583:       3270 instructions:u:      7fac71e2e494 __GI___tunables_init+0xf4 (/lib/x86_64-linux-gnu/ld-2.28.so)
 ls 13812 [003] 2167315.222667:      30902 instructions:u:      7fac71e2da0f _dl_cache_libcmp+0x2f (/lib/x86_64-linux-gnu/ld-2.28.so)
 ls 13812 [003] 2167315.222667:         10 instructions:u:      7fac71e2d9ff _dl_cache_libcmp+0x1f (/lib/x86_64-linux-gnu/ld-2.28.so)
 ls 13812 [003] 2167315.222667:          8 instructions:u:      7fac71e2d9ea _dl_cache_libcmp+0xa (/lib/x86_64-linux-gnu/ld-2.28.so)
 ls 13812 [003] 2167315.222667:         14 instructions:u:      7fac71e2d9ea _dl_cache_libcmp+0xa (/lib/x86_64-linux-gnu/ld-2.28.so)
 ls 13812 [003] 2167315.222667:          6 instructions:u:      7fac71e2d9ff _dl_cache_libcmp+0x1f (/lib/x86_64-linux-gnu/ld-2.28.so)
 ls 13812 [003] 2167315.222667:         14 instructions:u:      7fac71e2d9ff _dl_cache_libcmp+0x1f (/lib/x86_64-linux-gnu/ld-2.28.so)
 ls 13812 [003] 2167315.222667:          4 instructions:u:      7fac71e2dab2 _dl_cache_libcmp+0xd2 (/lib/x86_64-linux-gnu/ld-2.28.so)
 ls 13812 [003] 2167315.222728:      16423 instructions:u:      7fac71e2477a _dl_map_object_deps+0x1ba (/lib/x86_64-linux-gnu/ld-2.28.so)
 ls 13812 [003] 2167315.222734:      12731 instructions:u:      7fac71e27938 _dl_name_match_p+0x68 (/lib/x86_64-linux-gnu/ld-2.28.so)
 ...

 After:
 $ perf script --itrace=i10us
 ls 13812 [003] 2167315.222583:       3270 instructions:u:      7fac71e2e494 __GI___tunables_init+0xf4 (/lib/x86_64-linux-gnu/ld-2.28.so)
 ls 13812 [003] 2167315.222667:      30902 instructions:u:      7fac71e2da0f _dl_cache_libcmp+0x2f (/lib/x86_64-linux-gnu/ld-2.28.so)
 ls 13812 [003] 2167315.222728:      16479 instructions:u:      7fac71e2477a _dl_map_object_deps+0x1ba (/lib/x86_64-linux-gnu/ld-2.28.so)
 ...
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: stable@vger.kernel.org
Fixes: f4aa0819 ("perf tools: Add Intel PT decoder")
Link: http://lkml.kernel.org/r/20190510124143.27054-2-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit b906c056b6023c390f18347169071193fda57dde upstream.

Multiplying the Memory Controller clock rate by the tick count results
in an integer overflow and in result the truncated tick value is being
programmed into hardware, such that the GR3D memory client performance is
reduced by two times.

Cc: stable <stable@vger.kernel.org>
Signed-off-by: NDmitry Osipenko <digetx@gmail.com>
Signed-off-by: NThierry Reding <treding@nvidia.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit cbe08bcbbe787315c425dde284dcb715cfbf3f39 upstream.

When reading only part of the id file, the ppos isn't tracked correctly.
This is taken care by simple_read_from_buffer.

Reading a single byte, and then the next byte would result EOF.

While this seems like not a big deal, this breaks abstractions that
reads information from files unbuffered. See for example
https://github.com/golang/go/issues/29399

This code was mentioned as problematic in
commit cd458ba9
("tracing: Do not (ab)use trace_seq in event_id_read()")

An example C code that show this bug is:

  #include <stdio.h>
  #include <stdint.h>

  #include <sys/types.h>
  #include <sys/stat.h>
  #include <fcntl.h>
  #include <unistd.h>

  int main(int argc, char **argv) {
    if (argc < 2)
      return 1;
    int fd = open(argv[1], O_RDONLY);
    char c;
    read(fd, &c, 1);
    printf("First  %c\n", c);
    read(fd, &c, 1);
    printf("Second %c\n", c);
  }

Then run with, e.g.

  sudo ./a.out /sys/kernel/debug/tracing/events/tcp/tcp_set_state/id

You'll notice you're getting the first character twice, instead of the
first two characters in the id file.

Link: http://lkml.kernel.org/r/20181231115837.4932-1-elazar@lightbitslabs.com

Cc: Orit Wasserman <orit.was@gmail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: stable@vger.kernel.org
Fixes: 23725aee ("ftrace: provide an id file for each event")
Signed-off-by: NElazar Leibovich <elazar@lightbitslabs.com>
Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 9e298e8604088a600d8100a111a532a9d342af09 upstream.

Nicolai Stange discovered[1] that if live kernel patching is enabled, and the
function tracer started tracing the same function that was patched, the
conversion of the fentry call site during the translation of going from
calling the live kernel patch trampoline to the iterator trampoline, would
have as slight window where it didn't call anything.

As live kernel patching depends on ftrace to always call its code (to
prevent the function being traced from being called, as it will redirect
it). This small window would allow the old buggy function to be called, and
this can cause undesirable results.

Nicolai submitted new patches[2] but these were controversial. As this is
similar to the static call emulation issues that came up a while ago[3].
But after some debate[4][5] adding a gap in the stack when entering the
breakpoint handler allows for pushing the return address onto the stack to
easily emulate a call.

[1] http://lkml.kernel.org/r/20180726104029.7736-1-nstange@suse.de
[2] http://lkml.kernel.org/r/20190427100639.15074-1-nstange@suse.de
[3] http://lkml.kernel.org/r/3cf04e113d71c9f8e4be95fb84a510f085aa4afa.1541711457.git.jpoimboe@redhat.com
[4] http://lkml.kernel.org/r/CAHk-=wh5OpheSU8Em_Q3Hg8qw_JtoijxOdPtHru6d+5K8TWM=A@mail.gmail.com
[5] http://lkml.kernel.org/r/CAHk-=wjvQxY4DvPrJ6haPgAa6b906h=MwZXO6G8OtiTGe=N7_w@mail.gmail.com

[
  Live kernel patching is not implemented on x86_32, thus the emulate
  calls are only for x86_64.
]

Cc: Andy Lutomirski <luto@kernel.org>
Cc: Nicolai Stange <nstange@suse.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: the arch/x86 maintainers <x86@kernel.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Miroslav Benes <mbenes@suse.cz>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Joe Lawrence <joe.lawrence@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Mimi Zohar <zohar@linux.ibm.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Nayna Jain <nayna@linux.ibm.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Joerg Roedel <jroedel@suse.de>
Cc: "open list:KERNEL SELFTEST FRAMEWORK" <linux-kselftest@vger.kernel.org>
Cc: stable@vger.kernel.org
Fixes: b700e7f0 ("livepatch: kernel: add support for live patching")
Tested-by: NNicolai Stange <nstange@suse.de>
Reviewed-by: NNicolai Stange <nstange@suse.de>
Reviewed-by: NMasami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
[ Changed to only implement emulated calls for x86_64 ]
Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 4b33dadf37666c0860b88f9e52a16d07bf6d0b03 upstream.

In order to allow breakpoints to emulate call instructions, they need to push
the return address onto the stack. The x86_64 int3 handler adds a small gap
to allow the stack to grow some. Use this gap to add the return address to
be able to emulate a call instruction at the breakpoint location.

These helper functions are added:

  int3_emulate_jmp(): changes the location of the regs->ip to return there.

 (The next two are only for x86_64)
  int3_emulate_push(): to push the address onto the gap in the stack
  int3_emulate_call(): push the return address and change regs->ip

Cc: Andy Lutomirski <luto@kernel.org>
Cc: Nicolai Stange <nstange@suse.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: the arch/x86 maintainers <x86@kernel.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Miroslav Benes <mbenes@suse.cz>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Joe Lawrence <joe.lawrence@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Mimi Zohar <zohar@linux.ibm.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Nayna Jain <nayna@linux.ibm.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Joerg Roedel <jroedel@suse.de>
Cc: "open list:KERNEL SELFTEST FRAMEWORK" <linux-kselftest@vger.kernel.org>
Cc: stable@vger.kernel.org
Fixes: b700e7f0 ("livepatch: kernel: add support for live patching")
Tested-by: NNicolai Stange <nstange@suse.de>
Reviewed-by: NNicolai Stange <nstange@suse.de>
Reviewed-by: NMasami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
[ Modified to only work for x86_64 and added comment to int3_emulate_push() ]
Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 2700fefdb2d9751c416ad56897e27d41e409324a upstream.

To allow an int3 handler to emulate a call instruction, it must be able to
push a return address onto the stack. Add a gap to the stack to allow the
int3 handler to push the return address and change the return from int3 to
jump straight to the emulated called function target.

Link: http://lkml.kernel.org/r/20181130183917.hxmti5josgq4clti@treble
Link: http://lkml.kernel.org/r/20190502162133.GX2623@hirez.programming.kicks-ass.net

[
  Note, this is needed to allow Live Kernel Patching to not miss calling a
  patched function when tracing is enabled. -- Steven Rostedt
]

Cc: stable@vger.kernel.org
Fixes: b700e7f0 ("livepatch: kernel: add support for live patching")
Tested-by: NNicolai Stange <nstange@suse.de>
Reviewed-by: NNicolai Stange <nstange@suse.de>
Reviewed-by: NMasami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: NJosh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 00abf69dd24f4444d185982379c5cc3bb7b6d1fc upstream.

xfstest generic/452 was triggering a "Busy inodes after umount" warning.
ceph was allowing the mount to go read-only without first flushing out
dirty inodes in the cache. Ensure we sync out the filesystem before
allowing a remount to proceed.

Cc: stable@vger.kernel.org
Link: http://tracker.ceph.com/issues/39571Signed-off-by: NJeff Layton <jlayton@kernel.org>
Reviewed-by: N"Yan, Zheng" <zyan@redhat.com>
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 43a0541e312f7136e081e6bf58f6c8a2e9672688 upstream.

Both Tegra30 and Tegra114 have 4 ASID's and the corresponding bitfield of
the TLB_FLUSH register differs from later Tegra generations that have 128
ASID's.

In a result the PTE's are now flushed correctly from TLB and this fixes
problems with graphics (randomly failing tests) on Tegra30.

Cc: stable <stable@vger.kernel.org>
Signed-off-by: NDmitry Osipenko <digetx@gmail.com>
Acked-by: NThierry Reding <treding@nvidia.com>
Signed-off-by: NJoerg Roedel <jroedel@suse.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 3428030da004a1128cbdcf93dc03e16f184d845b upstream.

Generalize the helper ovl_open_maybe_copy_up() and use it to copy up file
with data before FS_IOC_SETFLAGS ioctl.

The FS_IOC_SETFLAGS ioctl is a bit of an odd ball in vfs, which probably
caused the confusion.  File may be open O_RDONLY, but ioctl modifies the
file.  VFS does not call mnt_want_write_file() nor lock inode mutex, but
fs-specific code for FS_IOC_SETFLAGS does.  So ovl_ioctl() calls
mnt_want_write_file() for the overlay file, and fs-specific code calls
mnt_want_write_file() for upper fs file, but there was no call for
ovl_want_write() for copy up duration which prevents overlayfs from copying
up on a frozen upper fs.

Fixes: dab5ca8f ("ovl: add lsattr/chattr support")
Cc: <stable@vger.kernel.org> # v4.19
Signed-off-by: NAmir Goldstein <amir73il@gmail.com>
Acked-by: NVivek Goyal <vgoyal@redhat.com>
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 0cbade024ba501313da3b7e5dd2a188a6bc491b5 upstream.

fstests generic/228 reported this failure that fuse fallocate does not
honor what 'ulimit -f' has set.

This adds the necessary inode_newsize_ok() check.
Signed-off-by: NLiu Bo <bo.liu@linux.alibaba.com>
Fixes: 05ba1f08 ("fuse: add FALLOCATE operation")
Cc: <stable@vger.kernel.org> # v3.5
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 9de5be06d0a89ca97b5ab902694d42dfd2bb77d2 upstream.

Writepage requests were cropped to i_size & 0xffffffff, which meant that
mmaped writes to any file larger than 4G might be silently discarded.

Fix by storing the file size in a properly sized variable (loff_t instead
of size_t).
Reported-by: NAntonio SJ Musumeci <trapexit@spawn.link>
Fixes: 6eaf4782 ("fuse: writepages: crop secondary requests")
Cc: <stable@vger.kernel.org> # v3.13
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit babc250e278eac7b0e671bdaedf833759b43bb78 upstream.

Rendering calls may be done simultaneously from the workqueue,
dlfb_ops_write, dlfb_ops_ioctl, dlfb_ops_set_par and dlfb_dpy_deferred_io.
The code is robust enough so that it won't crash on concurrent rendering.

However, concurrent rendering may cause display corruption if the same
pixel is simultaneously being rendered. In order to avoid this corruption,
this patch adds a mutex around the rendering calls.
Signed-off-by: NMikulas Patocka <mpatocka@redhat.com>
Cc: Bernie Thompson <bernie@plugable.com>
Cc: Ladislav Michl <ladis@linux-mips.org>
Cc: <stable@vger.kernel.org>
[b.zolnierkie: replace "dlfb:" with "uldfb:" in the patch summary]
Signed-off-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 6b11f9d8433b471fdd3ebed232b43a4b723be6ff upstream.

If a framebuffer device is used as a console, the rendering calls
(copyarea, fillrect, imageblit) may be done with the console spinlock
held. On udlfb, these function call dlfb_handle_damage that takes a
blocking semaphore before acquiring an URB.

In order to fix the bug, this patch changes the calls copyarea, fillrect
and imageblit to offload USB work to a workqueue.

A side effect of this patch is 3x improvement in console scrolling speed
because the device doesn't have to be updated after each copyarea call.
Signed-off-by: NMikulas Patocka <mpatocka@redhat.com>
Cc: Bernie Thompson <bernie@plugable.com>
Cc: Ladislav Michl <ladis@linux-mips.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit bd86b6c5c60711dbd4fa21bdb497a188ecb6cf63 upstream.

Remove the unused parameter "data" and unused variable "ret".
Signed-off-by: NMikulas Patocka <mpatocka@redhat.com>
Cc: Bernie Thompson <bernie@plugable.com>
Cc: Ladislav Michl <ladis@linux-mips.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit fb903392131a324a243c7731389277db1cd9f8df upstream.

This patch fixes definition of several clock gate and select register
that is wrong for rk3328 referring to the TRM and vendor kernel.
Also use correct number of softrst registers.

Fix clock definition for:
- clk_crypto
- aclk_h265
- pclk_h265
- aclk_h264
- hclk_h264
- aclk_axisram
- aclk_gmac
- aclk_usb3otg

Fixes: fe3511ad ("clk: rockchip: add clock controller for rk3328")
Cc: stable@vger.kernel.org
Signed-off-by: NJonas Karlman <jonas@kwiboo.se>
Tested-by: NPeter Geis <pgwipeout@gmail.com>
Signed-off-by: NHeiko Stuebner <heiko@sntech.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit be17ca6ac76a5cfd07cc3a0397dd05d6929fcbbb upstream.

PLLs with tuner_en bit, such as APLL1, need to disable
tuner_en before apply new frequency settings, or the new frequency
settings (pcw) will not be applied.
The tuner_en bit will be disabled during changing PLL rate
and be restored after new settings applied.

Fixes: e2f744a8 (clk: mediatek: Add MT2712 clock support)
Cc: <stable@vger.kernel.org>
Signed-off-by: NOwen Chen <owen.chen@mediatek.com>
Signed-off-by: NWeiyi Lu <weiyi.lu@mediatek.com>
Reviewed-by: NJames Liao <jamesjj.liao@mediatek.com>
Reviewed-by: NMatthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: NStephen Boyd <sboyd@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 40db569d6769ffa3864fd1b89616b1a7323568a8 upstream.

There are wrongly set parenthesis in the code that are resulting in a
wrong configuration being programmed for PLLM. The original fix was made
by Danny Huang in the downstream kernel. The patch was tested on Nyan Big
Tegra124 chromebook, PLLM rate changing works correctly now and system
doesn't lock up after changing the PLLM rate due to EMC scaling.

Cc: <stable@vger.kernel.org>
Tested-by: NSteev Klimaszewski <steev@kali.org>
Signed-off-by: NDmitry Osipenko <digetx@gmail.com>
Acked-By: NPeter De Schrijver <pdeschrijver@nvidia.com>
Signed-off-by: NStephen Boyd <sboyd@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 9f77a60669d13ed4ddfa6cd7374c9d88da378ffa upstream.

clk_gate_ufs_subsys is a system bus clock, turning off it will
introduce lockup issue during system suspend flow.  Let's mark
clk_gate_ufs_subsys as critical clock, thus keeps it on during
system suspend and resume.

Fixes: d374e6fd ("clk: hisilicon: Add clock driver for hi3660 SoC")
Cc: stable@vger.kernel.org
Cc: Zhong Kaihua <zhongkaihua@huawei.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Zhangfei Gao <zhangfei.gao@linaro.org>
Suggested-by: NDong Zhang <zhangdong46@hisilicon.com>
Signed-off-by: NLeo Yan <leo.yan@linaro.org>
Signed-off-by: NStephen Boyd <sboyd@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit b1029c9bc078a6f1515f55dd993b507dcc7e3440 upstream.

If we fail to find a good deviceid while trying to pnfs instead of
propogating an error back fallback to doing IO to the MDS. Currently,
code with fals the IO with EINVAL.
Signed-off-by: NOlga Kornievskaia <kolga@netapp.com>
Fixes: 8d40b0f1 ("NFS filelayout:call GETDEVICEINFO after pnfs_layout_process completes"
Cc: stable@vger.kernel.org # v4.11+
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit f02f3755dbd14fb935d24b14650fff9ba92243b8 upstream.

stat command with soft mount never return after server is stopped.

When alloc a new client, the state of the client will be set to
NFS4CLNT_LEASE_EXPIRED.

When the server is stopped, the state manager will work, and accord
the state to recover. But the state is NFS4CLNT_LEASE_EXPIRED, it
will drain the slot table and lead other task to wait queue, until
the client recovered. Then the stat command is hung.

When discover server trunking, the client will renew the lease,
but check the client state, it lead the client state corruption.

So, we need to call state manager to recover it when detect server
ip trunking.
Signed-off-by: NZhangXiaoxu <zhangxiaoxu5@huawei.com>
Cc: stable@vger.kernel.org
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 107927fa597c99eaeee4f51865ca0956ec71b6a2 upstream.

In imx_media_create_csi_of_links(), the 'struct v4l2_fwnode_link' must
be cleared for each endpoint iteration, otherwise if the remote port
has no "reg" property, link.remote_port will not be reset to zero.
This was discovered on the i.MX53 SMD board, since the OV5642 connects
directly to ipu1_csi0 and has a single source port with no "reg"
property.

Fixes: 621b08ea ("media: staging/imx: remove static media link arrays")
Signed-off-by: NSteve Longerbeam <slongerbeam@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: NHans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 904371f90b2c0c749a5ab75478c129a4682ac3d8 upstream.

On i.MX6, the nearest upstream entity to the CSI can only be the
CSI video muxes or the Synopsys DW MIPI CSI-2 receiver.

However the i.MX53 has no CSI video muxes or a MIPI CSI-2 receiver.
So allow for the nearest upstream entity to the CSI to be something
other than those.

Fixes: bf3cfaa7 ("media: staging/imx: get CSI bus type from nearest
upstream entity")
Signed-off-by: NSteve Longerbeam <slongerbeam@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: NHans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 933c1320847f5ed6b61a7d10f0a948aa98ccd7b0 upstream.

After removal of clock_start() from before soc_camera_init_i2c() in
soc_camera_probe() by commit 9aea470b ("[media] soc-camera: switch
I2C subdevice drivers to use v4l2-clk") introduced in v3.11, the ov6650
driver could no longer probe the sensor successfully because its clock
was no longer turned on in advance.  The issue was initially worked
around by adding that missing clock_start() equivalent to OMAP1 camera
interface driver - the only user of this sensor - but a propoer fix
should be rather implemented in the sensor driver code itself.

Fix the issue by inserting a delay between the clock is turned on and
the sensor I2C registers are read for the first time.

Tested on Amstrad Delta with now out of tree but still locally
maintained omap1_camera host driver.

Fixes: 9aea470b ("[media] soc-camera: switch I2C subdevice drivers to use v4l2-clk")
Signed-off-by: NJanusz Krzysztofik <jmkrzyszt@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit e6577cb5103b7ca7c0204c0c86ef4af8aa6288f6 upstream.

There seems to be a missing bit-wise or operator when setting val,
fix this by adding it in.

Fixes: 2796ceb0 ("phy: ti-pipe3: Update pcie phy settings")
Cc: stable@vger.kernel.org # v4.19+
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Signed-off-by: NKishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 6a54b2e002c9d00b398d35724c79f9fe0d9b38fb upstream.

Change strcat to strncpy in the "None" case to fix a buffer overflow
when cinode->oplock is reset to 0 by another thread accessing the same
cinode. It is never valid to append "None" to any other message.

Consolidate multiple writes to cinode->oplock to reduce raciness.
Signed-off-by: NChristoph Probst <kernel@probst.it>
Reviewed-by: NPavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: NSteve French <stfrench@microsoft.com>
CC: Stable <stable@vger.kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 440868661f36071886ed360d91de83bd67c73b4f upstream.

Now, make the loop explicit to avoid clang warning.

./include/linux/of.h:238:37: warning: multiple unsequenced modifications
to 'cell' [-Wunsequenced]
                r = (r << 32) | be32_to_cpu(*(cell++));
                                                  ^~
./include/linux/byteorder/generic.h:95:21: note: expanded from macro
'be32_to_cpu'
                    ^
./include/uapi/linux/byteorder/little_endian.h:40:59: note: expanded
from macro '__be32_to_cpu'
                                                          ^
./include/uapi/linux/swab.h:118:21: note: expanded from macro '__swab32'
        ___constant_swab32(x) :                 \
                           ^
./include/uapi/linux/swab.h:18:12: note: expanded from macro
'___constant_swab32'
        (((__u32)(x) & (__u32)0x000000ffUL) << 24) |            \
                  ^
Signed-off-by: NPhong Tran <tranmanphong@gmail.com>
Reported-by: NNick Desaulniers <ndesaulniers@google.com>
Link: https://github.com/ClangBuiltLinux/linux/issues/460Suggested-by: NDavid Laight <David.Laight@ACULAB.COM>
Reviewed-by: NNick Desaulniers <ndesaulniers@google.com>
Cc: stable@vger.kernel.org
[robh: fix up whitespace]
Signed-off-by: NRob Herring <robh@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 8149069db81853570a665f5e5648c0e526dc0e43 upstream.

The function p54p_probe takes an extra reference count of the PCI
device. However, the extra reference count is not dropped when it fails
to enable the PCI device. This patch fixes the bug.

Cc: stable@vger.kernel.org
Signed-off-by: NPan Bian <bianpan2016@163.com>
Acked-by: NChristian Lamparter <chunkeey@gmail.com>
Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 4e0eaf239fb33ebc671303e2b736fa043462e2f4 upstream.

Currently, the pages that are allocated for the single mode of MSC are not
mapped into the device's dma space and the code is incorrectly using
*_to_phys() in place of a dma address. This fails with IOMMU enabled and
is otherwise bad practice.

Fix the single mode buffer allocation to map the pages into the device's
DMA space.
Signed-off-by: NAlexander Shishkin <alexander.shishkin@linux.intel.com>
Fixes: ba82664c ("intel_th: Add Memory Storage Unit driver")
Cc: stable@vger.kernel.org # v4.4+
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 5467a68cbf6884c9a9d91e2a89140afb1839c835 upstream.

For lockless accesses to dentries we don't have pinned we rely
(among other things) upon having an RCU delay between dropping
the last reference and actually freeing the memory.

On the other hand, for things like pipes and sockets we neither
do that kind of lockless access, nor want to deal with the
overhead of an RCU delay every time a socket gets closed.

So delay was made optional - setting DCACHE_RCUACCESS in ->d_flags
made sure it would happen.  We tried to avoid setting it unless
we knew we need it.  Unfortunately, that had led to recurring
class of bugs, in which we missed the need to set it.

We only really need it for dentries that are created by
d_alloc_pseudo(), so let's not bother with trying to be smart -
just make having an RCU delay the default.  The ones that do
*not* get it set the replacement flag (DCACHE_NORCU) and we'd
better use that sparingly.  d_alloc_pseudo() is the only
such user right now.

FWIW, the race that finally prompted that switch had been
between __lock_parent() of immediate subdirectory of what's
currently the root of a disconnected tree (e.g. from
open-by-handle in progress) racing with d_splice_alias()
elsewhere picking another alias for the same inode, either
on outright corrupted fs image, or (in case of open-by-handle
on NFS) that subdirectory having been just moved on server.
It's not easy to hit, so the sky is not falling, but that's
not the first race on similar missed cases and the logics
for settinf DCACHE_RCUACCESS has gotten ridiculously
convoluted.

Cc: stable@vger.kernel.org
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit ee37e62191a59d253fc916b9fc763deb777211e2 upstream.

When doing re-add, we need to ensure rdev->mddev->pers is not NULL,
which can avoid potential NULL pointer derefence in fallowing
add_bound_rdev().

Fixes: a6da4ef8 ("md: re-add a failed disk")
Cc: Xiao Ni <xni@redhat.com>
Cc: NeilBrown <neilb@suse.com>
Cc: <stable@vger.kernel.org> # 4.4+
Reviewed-by: NNeilBrown <neilb@suse.com>
Signed-off-by: NYufen Yu <yuyufen@huawei.com>
Signed-off-by: NSong Liu <songliubraving@fb.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 2bc13b83e6298486371761de503faeffd15b7534 upstream.

Currently if many flush requests are submitted to an md device is quick
succession, they are serialized and can take a long to process them all.
We don't really need to call flush all those times - a single flush call
can satisfy all requests submitted before it started.
So keep track of when the current flush started and when it finished,
allow any pending flush that was requested before the flush started
to complete without waiting any more.

Test results from Xiao:

Test is done on a raid10 device which is created by 4 SSDs. The tool is
dbench.

1. The latest linux stable kernel
  Operation                Count    AvgLat    MaxLat
  --------------------------------------------------
  Deltree                    768    10.509    78.305
  Flush                  2078376     0.013    10.094
  Close                  21787697     0.019    18.821
  LockX                    96580     0.007     3.184
  Mkdir                      384     0.008     0.062
  Rename                 1255883     0.191    23.534
  ReadX                  46495589     0.020    14.230
  WriteX                 14790591     7.123    60.706
  Unlink                 5989118     0.440    54.551
  UnlockX                  96580     0.005     2.736
  FIND_FIRST             10393845     0.042    12.079
  SET_FILE_INFORMATION   2415558     0.129    10.088
  QUERY_FILE_INFORMATION 4711725     0.005     8.462
  QUERY_PATH_INFORMATION 26883327     0.032    21.715
  QUERY_FS_INFORMATION   4929409b     0.010     8.238
  NTCreateX              29660080     0.100    53.268

Throughput 1034.88 MB/sec (sync open)  128 clients  128 procs
max_latency=60.712 ms

2. With patch1 "Revert "MD: fix lock contention for flush bios""
  Operation                Count    AvgLat    MaxLat
  --------------------------------------------------
  Deltree                    256     8.326    36.761
  Flush                   693291     3.974   180.269
  Close                  7266404     0.009    36.929
  LockX                    32160     0.006     0.840
  Mkdir                      128     0.008     0.021
  Rename                  418755     0.063    29.945
  ReadX                  15498708     0.007     7.216
  WriteX                 4932310    22.482   267.928
  Unlink                 1997557     0.109    47.553
  UnlockX                  32160     0.004     1.110
  FIND_FIRST             3465791     0.036     7.320
  SET_FILE_INFORMATION    805825     0.015     1.561
  QUERY_FILE_INFORMATION 1570950     0.005     2.403
  QUERY_PATH_INFORMATION 8965483     0.013    14.277
  QUERY_FS_INFORMATION   1643626     0.009     3.314
  NTCreateX              9892174     0.061    41.278

Throughput 345.009 MB/sec (sync open)  128 clients  128 procs
max_latency=267.939 m

3. With patch1 and patch2
  Operation                Count    AvgLat    MaxLat
  --------------------------------------------------
  Deltree                    768     9.570    54.588
  Flush                  2061354     0.666    15.102
  Close                  21604811     0.012    25.697
  LockX                    95770     0.007     1.424
  Mkdir                      384     0.008     0.053
  Rename                 1245411     0.096    12.263
  ReadX                  46103198     0.011    12.116
  WriteX                 14667988     7.375    60.069
  Unlink                 5938936     0.173    30.905
  UnlockX                  95770     0.005     4.147
  FIND_FIRST             10306407     0.041    11.715
  SET_FILE_INFORMATION   2395987     0.048     7.640
  QUERY_FILE_INFORMATION 4672371     0.005     9.291
  QUERY_PATH_INFORMATION 26656735     0.018    19.719
  QUERY_FS_INFORMATION   4887940     0.010     7.654
  NTCreateX              29410811     0.059    28.551

Throughput 1026.21 MB/sec (sync open)  128 clients  128 procs
max_latency=60.075 ms

Cc: <stable@vger.kernel.org> # v4.19+
Tested-by: NXiao Ni <xni@redhat.com>
Signed-off-by: NNeilBrown <neilb@suse.com>
Signed-off-by: NSong Liu <songliubraving@fb.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>