This patch converts the gp8psk module to use the S2API.
It pretends to be  DVB-S2 capable in order to allow the various
supported modulations (8PSK, QPSK-Turbo, etc), and keep software
compatibility with the S2API patches for Mythtv and VDR.

Signed-off by: Alan Nisota <alannisota@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

This patch uses the same code for enumberating video formats that are
present on cx88, bttv and saa7134 drivers.
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The changeset 78aa52a159cf introduced a bug on em28xx: buffer setup should be
awaking xc3028. Instead, since we didn't specify the tuner mode, the device
were going to sleep, due to the lack of tuner mode when asking tuner to handle
VIDIOC_S_FREQUENCY:

xc2028 0-0061: Device is Xceive 3028 version 1.0, firmware version 2.7
xc2028 0-0061: divisor= 00 00 14 d0 (freq=83.250)
xc2028 0-0061: Putting xc2028/3028 into poweroff mode.
xc2028 0-0061: Printing sleep stack trace:
Pid: 10936, comm: mplayer Tainted: P   M      2.6.27.8 #1

Call Trace:
 [<ffffffffa0b759ea>] xc2028_sleep+0x89/0x1ab [tuner_xc2028]
 [<ffffffffa0b48fb9>] tuner_s_frequency+0xf5/0x165 [tuner]
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The init_fw option was broken for the HVR-950q because we would call the reset
callback inside of dvb_attach() and the callback had not been setup yet.

Michael Krufky (who added the init_fw feature) says it's no longer required,
so just remove the option completely.

Thanks to user Zzeiss from #linuxtv chat for reporting the issue and
Michael Krufky <mkrufky@linuxtv.org> for proposing the fix.
Signed-off-by: NDevin Heitmueller <dheitmueller@linuxtv.org>
Acked-by: NMichael Krufky <mkrufky@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Don't operate under the assumption that every device that uses the em2820
default USB ID is a Prolink PlayTV USB.  We have an eeprom hash, so use that,
since otherwise we cannot support other devices with the 2820 default USB ID
(such as the ADS Tech Instant TV USB USBAV-704)
Signed-off-by: NDevin Heitmueller <dheitmueller@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Add the em2870 to the list of known em28xx chip ids.
Signed-off-by: NDevin Heitmueller <dheitmueller@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

This cleans-up the advise/acquire methods.

This has been tested on the hvr-1300/4000 and assumed to be
correct on the hvr-3000.

This update also fixes analogue tuning on the hvr-1300
when in blackbird mode.
Signed-off-by: NDarron Broad <darron@kewl.org>
Cc: Steven Toth <stoth@hauppauge.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Slow tuning, EG:

> szap-s2 -r -c 39.FTATV "1=Pgm1;Net1"
reading channels from file '39.FTATV'
zapping to 3 '1=Pgm1;Net1':
delivery DVB-S, modulation QPSK
sat 0, frequency 11140 MHz V, symbolrate 1425000, coderate 5/6, rolloff 0.35
vpid 0x0200, apid 0x0300, sid 0x0001
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
status 00 | signal c2c0 | snr 0000 | ber 00012d4a | unc 00000000 |
status 03 | signal ff80 | snr 0000 | ber 00000000 | unc 00000000 |
status 01 | signal ff80 | snr 0000 | ber 00000000 | unc 00000000 |
status 01 | signal ff80 | snr 0000 | ber 00000000 | unc 00000000 |
status 03 | signal c040 | snr 0000 | ber 00000000 | unc 00000000 |
status 03 | signal ff80 | snr 0000 | ber 00000000 | unc 00000000 |
status 01 | signal ff80 | snr 0000 | ber 00000000 | unc 00000000 |
status 03 | signal c040 | snr 0000 | ber 00000000 | unc 00000000 |
status 01 | signal ff80 | snr 0000 | ber 00000000 | unc 00000000 |
status 01 | signal ff80 | snr 0000 | ber 00000000 | unc 00000000 |
status 01 | signal c040 | snr 0000 | ber 00000000 | unc 00000000 |
status 01 | signal ff80 | snr 0000 | ber 00000000 | unc 00000000 |
status 01 | signal ff80 | snr 0000 | ber 00000000 | unc 00000000 |
status 01 | signal c040 | snr 0000 | ber 00000000 | unc 00000000 |
status 03 | signal c040 | snr 0000 | ber 00000000 | unc 00000000 |
status 1f | signal c040 | snr bb33 | ber 00000000 | unc 00000000 | FE_HAS_LOCK

Appears to be resolved by dropping zig-zag tuning and relying on
hardware only:

> szap-s2 -r -c 39.FTATV "1=Pgm1;Net1"
reading channels from file '39.FTATV'
zapping to 3 '1=Pgm1;Net1':
delivery DVB-S, modulation QPSK
sat 0, frequency 11140 MHz V, symbolrate 1425000, coderate 5/6, rolloff 0.35
vpid 0x0200, apid 0x0300, sid 0x0001
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
status 01 | signal ff80 | snr 0000 | ber 00000000 | unc 00000000 |
status 1f | signal ff80 | snr c199 | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 1f | signal c040 | snr c199 | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 1f | signal ff80 | snr c199 | ber 00000000 | unc 00000000 | FE_HAS_LOCK

Tuning to a weaker channel shows that the hardware recovers sync:

status 1f | signal fe40 | snr 5199 | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 03 | signal fd40 | snr 5000 | ber 00000000 | unc 00000000 |
status 1f | signal fe40 | snr 5000 | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 03 | signal fd80 | snr 5000 | ber 00000000 | unc 00000000 |
status 01 | signal fd80 | snr 4e66 | ber 00000000 | unc 00000000 |
status 1f | signal fe40 | snr 5000 | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 03 | signal fe40 | snr 5000 | ber 00000000 | unc 00000000 |
status 01 | signal fd80 | snr 0000 | ber 00000000 | unc 00000000 |
status 1f | signal fe40 | snr 5199 | ber 00000000 | unc 00000000 | FE_HAS_LOCK

Also, tuning, moving the dish and then restoring the dish also retunes.
Signed-off-by: NDarron Broad <darron@kewl.org>
Cc: Steven Toth <stoth@hauppauge.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

It has been noticed that in HW tuning mode in cx24123.c that
a check is made to not alter the status var when in one shot
mode, a simpler solution is to not update here for all cards.

Cc: Steven Toth <stoth@hauppauge.com>
Signed-off-by: NDarron Broad <darron@kewl.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Thanks to AKPM for spotting this.

Cc: Steven Toth <stoth@hauppauge.com>
Signed-off-by: NDarron Broad <darron@kewl.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Delsys was missing when searching for FEC in table.

This fixes FEC lookup for DVB-S2 QPSK modulation.

Cc: Steven Toth <stoth@hauppauge.com>
Signed-off-by: NDarron Broad <darron@kewl.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

tuner-xc3028 can be put to sleep to save power. However, if not properly
recovered from sleep, the device won't work. It is noticed that some
devices doesn't recover properly, so let's add a dump_stack() as a debug
option, to allow us to track when this happens.
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Changes/fixes on em28xx dev->lock:

- em28xx_init_dev() were unlocking without a previous lock;

- some read ioctls need to lock after the removal of KBL, since a write
  may be happening at the same time an ioctl is reading;

- keep the device locked during all device initialization;

- lock/unlock while reading/writing registers.
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

vidioc_try_fmt_vid_cap() just checks if a given resolution is supported.
It doesn't touch on struct em28xx device descriptor. so, there's no need
to lock.

While there, use unlikely() for those values that aren't likely to
occur.
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Fix (bogus) compile warning about uninitialized variable.
Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Add support for absolute and continuous zoom controls (mapped to absolute
and relative UVC zoom controls).
Signed-off-by: NLaurent Pinchart <laurent.pinchart@skynet.be>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NLaurent Pinchart <laurent.pinchart@skynet.be>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Update v4l2_ctrl_get_name() and v4l2_ctrl_get_menu() with missing
control names and menu values.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@skynet.be>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The privacy control prevents video from being acquired by the camera. A true
value indicates that no image can be captured. Devices that implement the
privacy control must support read access and may support write access.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@skynet.be>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The zoom controls move the zoom lens group to a an absolute position, as a
relative displacement or at a given speed until reaching physical device
limits. Positive values move the zoom lens group towards the telephoto
direction, negative values towards the wide-angle direction.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@skynet.be>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Refine the firmware load and firmware startup process.  Significant changes
are to ensure the SCB and IPC area are correct before starting up the firmware,
and letting the CPU firmware start up the APU firmware for us.
Signed-off-by: NAndy Walls <awalls@radix.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

cx18: Use a known open task handle when setting stream CX2341x parameters
Sometimes, we might only have VBI or YUV stream open instead of an MPEG stream.
Let's make sure we use a valid task handle to perform the CX2341x control
settings.
Signed-off-by: NAndy Walls <awalls@radix.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NAndy Walls <awalls@radix.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

VBI comment corrections to avoid future confusion about standards.
Comments on cx18 VBI implementation shortcomings that need resolution.
Signed-off-by: NAndy Walls <awalls@radix.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Removed magic number that referred to firmware limit on the number of
MDLs the firmware can maintain for any stream at any one time.
Signed-off-by: NAndy Walls <awalls@radix.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Uwe Bugla pointed out that there are some more typos in some print-statements. Fixed.
Signed-off-by: NPatrick Boettcher <pb@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

This patch fixes a typo in cx24113.c.
Signed-off-by: NUwe Bugla <uwe.bugla@gmx.de>
Signed-off-by: NPatrick Boettcher <pb@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Fixed some minor coding style issues and some driver information
printed when using the driver on a board.
Signed-off-by: NPatrick Boettcher <pb@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NJean-Francois Moine <moinejf@free.fr>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The original version of sccb_read_reg() is from Jim Paris.

NOTE: as it is now reading sensor ID won't work for sensors on different
i2c slave address.
Signed-off-by: NAntonio Ospite <ospite@studenti.unina.it>
Signed-off-by: NJean-Francois Moine <moinejf@free.fr>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NAntonio Ospite <ospite@studenti.unina.it>
Signed-off-by: NJean-Francois Moine <moinejf@free.fr>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NJean-Francois Moine <moinejf@free.fr>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NJean-Francois Moine <moinejf@free.fr>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The vc0321 sends some additional data after sending the complete
frame, we ignore this.
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NJean-Francois Moine <moinejf@free.fr>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Add support for getting and setting framerate via v4l2 controls,
rather than setting a fixed value at module insertion.
Signed-off-by: NJim Paris <jim@jtan.com>
Signed-off-by: NJean-Francois Moine <moinejf@free.fr>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Add get_streamparm and set_streamparm operations so subdrivers can
get/set stream parameters such as framerate.
Signed-off-by: NJim Paris <jim@jtan.com>
Signed-off-by: NJean-Francois Moine <moinejf@free.fr>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>