提交 826c8b60 编写于 作者: P Patrick Boettcher 提交者: Mauro Carvalho Chehab

V4L/DVB (9887): Minor fixes for cx24113-driver (codingstyle)

Fixed some minor coding style issues and some driver information
printed when using the driver on a board.
Signed-off-by: NPatrick Boettcher <pb@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
上级 1dc87b6e
......@@ -50,46 +50,46 @@ struct cx24113_state {
u8 rev;
u8 ver;
u8 icp_mode:1;
u8 icp_mode:1;
#define ICP_LEVEL1 0
#define ICP_LEVEL2 1
#define ICP_LEVEL3 2
#define ICP_LEVEL4 3
u8 icp_man:2;
u8 icp_auto_low:2;
u8 icp_auto_mlow:2;
u8 icp_auto_mhi:2;
u8 icp_auto_hi:2;
u8 icp_dig;
u8 icp_man:2;
u8 icp_auto_low:2;
u8 icp_auto_mlow:2;
u8 icp_auto_mhi:2;
u8 icp_auto_hi:2;
u8 icp_dig;
#define LNA_MIN_GAIN 0
#define LNA_MID_GAIN 1
#define LNA_MAX_GAIN 2
u8 lna_gain:2;
u8 lna_gain:2;
u8 acp_on:1;
u8 acp_on:1;
u8 vco_mode:2;
u8 vco_shift:1;
u8 vco_mode:2;
u8 vco_shift:1;
#define VCOBANDSEL_6 0x80
#define VCOBANDSEL_5 0x01
#define VCOBANDSEL_4 0x02
#define VCOBANDSEL_3 0x04
#define VCOBANDSEL_2 0x08
#define VCOBANDSEL_1 0x10
u8 vco_band;
u8 vco_band;
#define VCODIV4 4
#define VCODIV2 2
u8 vcodiv;
u8 bs_delay:4;
u16 bs_freqcnt:13;
u16 bs_rdiv;
u8 prescaler_mode:1;
u8 bs_delay:4;
u16 bs_freqcnt:13;
u16 bs_rdiv;
u8 prescaler_mode:1;
u8 rfvga_bias_ctrl;
u8 rfvga_bias_ctrl;
s16 tuner_gain_thres;
u8 gain_level;
......@@ -345,12 +345,12 @@ static void cx24113_calc_pll_nf(struct cx24113_state *state, u16 *n, s32 *f)
}
F = freq_hz;
F *= (u64) (R * vcodiv * 262144);
dprintk("1 N: %d, F: %lld, R: %d\n", N, F, R);
dprintk("1 N: %d, F: %lld, R: %d\n", N, F, R);
do_div(F, state->config->xtal_khz*1000 * factor * 2);
dprintk("2 N: %d, F: %lld, R: %d\n", N, F, R);
dprintk("2 N: %d, F: %lld, R: %d\n", N, F, R);
F -= (N + 32) * 262144;
dprintk("3 N: %d, F: %lld, R: %d\n", N, F, R);
dprintk("3 N: %d, F: %lld, R: %d\n", N, F, R);
if (state->Fwindow_enabled) {
if (F > (262144 / 2 - 1638))
......@@ -392,21 +392,21 @@ static int cx24113_set_frequency(struct cx24113_state *state, u32 frequency)
u16 n = 6;
s32 f = 0;
r = cx24113_readreg(state, 0x14);
r = cx24113_readreg(state, 0x14);
cx24113_writereg(state, 0x14, r & 0x3f);
r = cx24113_readreg(state, 0x10);
cx24113_writereg(state, 0x10, r & 0xbf);
r = cx24113_readreg(state, 0x10);
cx24113_writereg(state, 0x10, r & 0xbf);
state->frequency = frequency;
dprintk("tuning to frequency: %d\n", frequency);
cx24113_calc_pll_nf(state, &n, &f);
cx24113_set_nfr(state, n, f, state->refdiv);
cx24113_calc_pll_nf(state, &n, &f);
cx24113_set_nfr(state, n, f, state->refdiv);
r = cx24113_readreg(state, 0x18) & 0xbf;
if (state->vcodiv != VCODIV2)
if (state->vcodiv != VCODIV2)
r |= 1 << 6;
cx24113_writereg(state, 0x18, r);
......@@ -527,7 +527,7 @@ static int cx24113_release(struct dvb_frontend *fe)
{
struct cx24113_state *state = fe->tuner_priv;
dprintk("\n");
fe->tuner_priv = NULL;
fe->tuner_priv = NULL;
kfree(state);
return 0;
}
......@@ -557,6 +557,7 @@ struct dvb_frontend *cx24113_attach(struct dvb_frontend *fe,
/* allocate memory for the internal state */
struct cx24113_state *state =
kzalloc(sizeof(struct cx24113_state), GFP_KERNEL);
int rc;
if (state == NULL) {
err("Unable to kmalloc\n");
goto error;
......@@ -572,15 +573,22 @@ struct dvb_frontend *cx24113_attach(struct dvb_frontend *fe,
* after power on */
cx24113_readreg(state, 0x00);
switch (state->rev = cx24113_readreg(state, 0x00)) {
rc = cx24113_readreg(state, 0x00);
if (rc < 0) {
info("cx24113 not found.\n");
goto error;
}
state->rev = rc;
switch (rc) {
case 0x43:
info("unknown device\n");
info("detected Cx24113 variant\n");
break;
case REV_CX24113:
info("CX24113\n");
info("sucessfully detected\n");
break;
default:
err("unsupported revision: %x\n", state->rev);
err("unsupported device id: %x\n", state->rev);
goto error;
}
state->ver = cx24113_readreg(state, 0x01);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册