- 30 1月, 2008 6 次提交
-
-
This patch changes the write_gdt_entry function signature. Instead of the old "a" and "b" parameters, it now receives a pointer to a desc_struct, and the size of the entry being handled. This is because x86_64 can have some 16-byte entries as well as 8-byte ones. Signed-off-by: NGlauber de Oliveira Costa <gcosta@redhat.com> CC: Zachary Amsden <zach@vmware.com> CC: Jeremy Fitzhardinge <Jeremy.Fitzhardinge.citrix.com> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
this patch changes write_idt_entry signature. It now takes a gate_desc instead of the a and b parameters. It will allow it to be later unified between i386 and x86_64. Signed-off-by: NGlauber de Oliveira Costa <gcosta@redhat.com> CC: Zachary Amsden <zach@vmware.com> CC: Jeremy Fitzhardinge <Jeremy.Fitzhardinge.citrix.com> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
This patch unifies struct desc_ptr between i386 and x86_64. They can be expressed in the exact same way in C code, only having to change the name of one of them. As Xgt_desc_struct is ugly and big, this is the one that goes away. There's also a padding field in i386, but it is not really needed in the C structure definition. Signed-off-by: NGlauber de Oliveira Costa <gcosta@redhat.com> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 H. Peter Anvin 提交于
This changes size-specific register names (eip/rip, esp/rsp, etc.) to generic names in the thread and tss structures. Signed-off-by: NH. Peter Anvin <hpa@zytor.com> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 H. Peter Anvin 提交于
We have a lot of code which differs only by the naming of specific members of structures that contain registers. In order to enable additional unifications, this patch drops the e- or r- size prefix from the register names in struct pt_regs, and drops the x- prefixes for segment registers on the 32-bit side. This patch also performs the equivalent renames in some additional places that might be candidates for unification in the future. Signed-off-by: NH. Peter Anvin <hpa@zytor.com> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Thomas Gleixner 提交于
Use u32 so 32 and 64bit have the same interface. Andrew Morton: xen, lguest build fixes Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 05 11月, 2007 2 次提交
-
-
由 Rusty Russell 提交于
After Adrian Bunk's "make async_hcall static" moved things around, update comments to match (aka "make Guest"). Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
-
由 Adrian Bunk 提交于
async_hcall() can become static. Signed-off-by: NAdrian Bunk <bunk@kernel.org> Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
-
- 25 10月, 2007 3 次提交
-
-
由 Rusty Russell 提交于
Went through the documentation doing typo and content fixes. This patch contains only comment and whitespace changes. Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
-
由 Jeff Garzik 提交于
Fix this error (i386 !SMP build) arch/x86/lguest/boot.c: In function ‘lguest_init’: arch/x86/lguest/boot.c:1059: error: ‘pm_power_off’ undeclared (first use in this function) by including linux/pm.h. Signed-off-by: NJeff Garzik <jgarzik@redhat.com> Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
-
由 Rusty Russell 提交于
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
-
- 24 10月, 2007 1 次提交
-
-
由 Jeff Garzik 提交于
Fix this error (i386 !SMP build): arch/x86/lguest/boot.c: In function lguest_init: arch/x86/lguest/boot.c:1059: error: pm_power_off undeclared (first use in this function) by including linux/pm.h. Signed-off-by: NJeff Garzik <jgarzik@redhat.com> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
- 23 10月, 2007 10 次提交
-
-
由 Rusty Russell 提交于
Version 2.07 of the boot protocol uses 0x23C for the hardware_subarch field, that for lguest is "1". This allows us to use the standard boot entry point rather than the "GenuineLguest" string hack. The standard entry point also clears the BSS and copies the boot parameters and commandline for us, saving more code. Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
-
由 Rusty Russell 提交于
This makes lguest able to use the virtio devices. We change the device descriptor page from a simple array to a variable length "type, config_len, status, config data..." format, and implement virtio_config_ops to read from that config data. We use the virtio ring implementation for an efficient Guest <-> Host virtqueue mechanism, and the new LHCALL_NOTIFY hypercall to kick the host when it changes. We also use LHCALL_NOTIFY on kernel addresses for very very early console output. We could have another hypercall, but this hack works quite well. Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
-
由 Rusty Russell 提交于
This gets rid of the lguest bus, drivers and DMA mechanism, to make way for a generic virtio mechanism. Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
-
由 Rusty Russell 提交于
1) This allows us to get alot closer to booting bzImages. 2) It means we don't have to know page_offset. 3) The Guest needs to modify the boot pagetables to create the PAGE_OFFSET mapping before jumping to C code. 4) guest_pa() walks the page tables rather than using page_offset. 5) We don't use page_offset to figure out whether to emulate: it was always kinda quesationable, and won't work for instructions done before remapping (bzImage unpacking in particular). 6) We still want the kernel address for tlb flushing: have the initial hypercall give us that, too. Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
-
由 Rusty Russell 提交于
(Based on Ron Minnich's LGUEST_PLAN9_SYSCALL patch). This patch allows Guests to specify what system call vector they want, and we try to reserve it. We only allow one non-Linux system call vector, to try to avoid DoS on the Host. Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
-
由 Jes Sorensen 提交于
Clean up the hypercall code to make the code in hypercalls.c architecture independent. First process the common hypercalls and then call lguest_arch_do_hcall() if the call hasn't been handled. Rename struct hcall_ring to hcall_args. This patch requires the previous patch which reorganize the layout of struct lguest_regs on i386 so they match the layout of struct hcall_args. Signed-off-by: NJes Sorensen <jes@sgi.com> Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
-
由 Jes Sorensen 提交于
Separate i386 architecture specific from core.c and move it to x86/core.c and add x86/lguest.h header file to match. Signed-off-by: NJes Sorensen <jes@sgi.com> Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
-
由 Rusty Russell 提交于
Lguest has two sides: host support (to launch guests) and guest support (replacement boot path and paravirt_ops). This moves the guest side to arch/x86/lguest where it's closer to related code. Signed-off-by: NRusty Russell <rusty@rustcorp.com.au> Cc: Andi Kleen <ak@suse.de>
-
由 Tony Breeds 提交于
Currently lguest will spend a lot of of time waking up the host, as it cannot go tickless (if the [host] TSC has been marked unstable). On my laptop I was getting ~40% of wakeups from lguest. With this patch applied, my laptop is much happier! Signed-off-by: NTony Breeds <tony@bakeyournoodle.com> Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
-
由 Rusty Russell 提交于
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
-
- 17 10月, 2007 3 次提交
-
-
由 H. Peter Anvin 提交于
Instead of using magic macros for boot_params access, simply use the boot_params structure. Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
-
由 Jeremy Fitzhardinge 提交于
Currently, the set_lazy_mode pv_op is overloaded with 5 functions: 1. enter lazy cpu mode 2. leave lazy cpu mode 3. enter lazy mmu mode 4. leave lazy mmu mode 5. flush pending batched operations This complicates each paravirt backend, since it needs to deal with all the possible state transitions, handling flushing, etc. In particular, flushing is quite distinct from the other 4 functions, and seems to just cause complication. This patch removes the set_lazy_mode operation, and adds "enter" and "leave" lazy mode operations on mmu_ops and cpu_ops. All the logic associated with enter and leaving lazy states is now in common code (basically BUG_ONs to make sure that no mode is current when entering a lazy mode, and make sure that the mode is current when leaving). Also, flush is handled in a common way, by simply leaving and re-entering the lazy mode. The result is that the Xen, lguest and VMI lazy mode implementations are much simpler. Signed-off-by: NJeremy Fitzhardinge <jeremy@xensource.com> Cc: Andi Kleen <ak@suse.de> Cc: Zach Amsden <zach@vmware.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Avi Kivity <avi@qumranet.com> Cc: Anthony Liguory <aliguori@us.ibm.com> Cc: "Glauber de Oliveira Costa" <glommer@gmail.com> Cc: Jun Nakajima <jun.nakajima@intel.com>
-
由 Jeremy Fitzhardinge 提交于
This patch refactors the paravirt_ops structure into groups of functionally related ops: pv_info - random info, rather than function entrypoints pv_init_ops - functions used at boot time (some for module_init too) pv_misc_ops - lazy mode, which didn't fit well anywhere else pv_time_ops - time-related functions pv_cpu_ops - various privileged instruction ops pv_irq_ops - operations for managing interrupt state pv_apic_ops - APIC operations pv_mmu_ops - operations for managing pagetables There are several motivations for this: 1. Some of these ops will be general to all x86, and some will be i386/x86-64 specific. This makes it easier to share common stuff while allowing separate implementations where needed. 2. At the moment we must export all of paravirt_ops, but modules only need selected parts of it. This allows us to export on a case by case basis (and also choose which export license we want to apply). 3. Functional groupings make things a bit more readable. Struct paravirt_ops is now only used as a template to generate patch-site identifiers, and to extract function pointers for inserting into jmp/calls when patching. It is only instantiated when needed. Signed-off-by: NJeremy Fitzhardinge <jeremy@xensource.com> Signed-off-by: NRusty Russell <rusty@rustcorp.com.au> Cc: Andi Kleen <ak@suse.de> Cc: Zach Amsden <zach@vmware.com> Cc: Avi Kivity <avi@qumranet.com> Cc: Anthony Liguory <aliguori@us.ibm.com> Cc: "Glauber de Oliveira Costa" <glommer@gmail.com> Cc: Jun Nakajima <jun.nakajima@intel.com>
-
- 13 9月, 2007 1 次提交
-
-
由 Rusty Russell 提交于
One of the very first things lguest_init() does is a memcpy. On Athlon/Duron/K7 or CyrixIII/VIA-C3 or Geode GX/LX, this tries to use MMX. memcpy -> _mmx_memcpy -> kernel_fpu_begin -> clts -> paravirt_ops.clts But we haven't set paravirt_ops.clts yet, so we do the native version and crash. The simplest solution is to use __memcpy. Thanks to Michael Rasenberger for the bug report. Signed-off-by: NRusty Russell <rusty@rustcorp.com.au> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 12 8月, 2007 1 次提交
-
-
由 Andi Kleen 提交于
Commit 19d36ccd "x86: Fix alternatives and kprobes to remap write-protected kernel text" uses code which is being patched for patching. In particular, paravirt_ops does patching in two stages: first it calls paravirt_ops.patch, then it fills any remaining instructions with nop_out(). nop_out calls text_poke() which calls lookup_address() which calls pgd_val() (aka paravirt_ops.pgd_val): that call site is one of the places we patch. If we always do patching as one single call to text_poke(), we only need make sure we're not patching the memcpy in text_poke itself. This means the prototype to paravirt_ops.patch needs to change, to marshal the new code into a buffer rather than patching in place as it does now. It also means all patching goes through text_poke(), which is known to be safe (apply_alternatives is also changed to make a single patch). AK: fix compilation on x86-64 (bad rusty!) AK: fix boot on x86-64 (sigh) AK: merged with other patches Signed-off-by: NRusty Russell <rusty@rustcorp.com.au> Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 09 8月, 2007 2 次提交
-
-
由 Rusty Russell 提交于
If a Guest makes hypercall which sets a GDT entry to not present, we currently set any segment registers using that GDT entry to 0. Unfortunately, this is not sufficient: there are other ways of altering GDT entries which will cause a fault. The correct solution to do what Linux does: let them set any GDT value they want and handle the #GP when popping causes a fault. This has the added benefit of making our Switcher slightly more robust in the case of any other bugs which cause it to fault. We kill the Guest if it causes a fault in the Switcher: it's the Guest's responsibility to make sure it's not using segments when it changes them. Signed-off-by: NRusty Russell <rusty@rustcorp.com.au> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Rusty Russell 提交于
lguest uses a host-supplied wallclock-based clocksource when the TSC is not reliable. As this is already in nanoseconds, I naively used a multiplier of 1 and a shift of 0. But update_wall_time() in its infinite wisdom decides to adjust the clock a little (where does it think it's getting a more accurate time from?) It will happily tweak the multiplier... to 0, then -1. So the "fix" is to use a shift of 22 like everyone else, and a multiplier of 1 << 22. Signed-off-by: NRusty Russell <rusty@rustcorp.com.au> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 29 7月, 2007 2 次提交
-
-
由 Rusty Russell 提交于
A non-periodic clock_event_device and the "jiffies" clock don't mix well: tick_handle_periodic() can go into an infinite loop. Currently lguest guests use the jiffies clock when the TSC is unusable. Instead, make the Host write the current time into the lguest page on every interrupt. This doesn't cost much but is more precise and at least as accurate as the jiffies clock. It also gets rid of the GET_WALLCLOCK hypercall. Also, delay setting sched_clock until our clock is set up, otherwise the early printk timestamps can go backwards (not harmful, just ugly). Signed-off-by: NRusty Russell <rusty@rustcorp.com.au> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Rusty Russell 提交于
Jason Yeh sent his crashing .config: bzImages made with CONFIG_RELOCATABLE=y put the relocs where the BSS is expected, and we crash with unusual results such as: lguest: unhandled trap 14 at 0xc0122ae1 (0xa9) Relying on BSS being zero was merely laziness on my part, and unfortunately, lguest doesn't go through the normal startup path (which does this in asm). Signed-off-by: NRusty Russell <rusty@rustcorp.com.au> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 27 7月, 2007 3 次提交
-
-
由 Rusty Russell 提交于
Documentation: The FIXMEs Signed-off-by: NRusty Russell <rusty@rustcorp.com.au> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Rusty Russell 提交于
Documentation: The Guest Signed-off-by: NRusty Russell <rusty@rustcorp.com.au> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Rusty Russell 提交于
The netfilter code had very good documentation: the Netfilter Hacking HOWTO. Noone ever read it. So this time I'm trying something different, using a bit of Knuthiness. Signed-off-by: NRusty Russell <rusty@rustcorp.com.au> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 22 7月, 2007 1 次提交
-
-
由 Thomas Gleixner 提交于
We need to make sure, that the clockevent devices are resumed, before the tick is resumed. The current resume logic does not guarantee this. Add CLOCK_EVT_MODE_RESUME and call the set mode functions of the clock event devices before resuming the tick / oneshot functionality. Fixup the existing users. Thanks to Nigel Cunningham for tracking down a long standing thinko, which affected the jinxed VAIO. [akpm@linux-foundation.org: xen build fix] Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Cc: john stultz <johnstul@us.ibm.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 21 7月, 2007 1 次提交
-
-
由 Rusty Russell 提交于
Guests currently use the default scheduler clock: this means they always use jiffies even if TSC is actually available. It doesn't make any noticeable difference here, but it's a better thing to do. Also remove commented-out asm/sched-clock.h from -mm tree. Signed-off-by: NRusty Russell <rusty@rustcorp.com.au> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 20 7月, 2007 2 次提交
-
-
由 Rusty Russell 提交于
This is the code for the "lg.ko" module, which allows lguest guests to be launched. [akpm@linux-foundation.org: update for futex-new-private-futexes] [akpm@linux-foundation.org: build fix] [jmorris@namei.org: lguest: use hrtimers] [akpm@linux-foundation.org: x86_64 build fix] Signed-off-by: NRusty Russell <rusty@rustcorp.com.au> Cc: Andi Kleen <ak@suse.de> Cc: Eric Dumazet <dada1@cosmosbay.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Rusty Russell 提交于
lguest is a simple hypervisor for Linux on Linux. Unlike kvm it doesn't need VT/SVM hardware. Unlike Xen it's simply "modprobe and go". Unlike both, it's 5000 lines and self-contained. Performance is ok, but not great (-30% on kernel compile). But given its hackability, I expect this to improve, along with the paravirt_ops code which it supplies a complete example for. There's also a 64-bit version being worked on and other craziness. But most of all, lguest is awesome fun! Too much of the kernel is a big ball of hair. lguest is simple enough to dive into and hack, plus has some warts which scream "fork me!". This patch: This is the code and headers required to make an i386 kernel an lguest guest. Signed-off-by: NRusty Russell <rusty@rustcorp.com.au> Cc: Andi Kleen <ak@suse.de> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-