- 28 3月, 2017 8 次提交
-
-
由 Jerome Brunet 提交于
Signed-off-by: NJerome Brunet <jbrunet@baylibre.com> Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
-
由 Neil Armstrong 提交于
When trying to add a gpio-hog, we enter a weird loop where the gpio-ranges is needed when gpiochip_add_data() is called but in the current implementation the ranges are added from the driver afterwards. A simple solution is to rely on the DR gpio-ranges attribute and remove the call to gpiochip_add_pin_range(). Signed-off-by: NNeil Armstrong <narmstrong@baylibre.com> Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
-
由 Krzysztof Kozlowski 提交于
Add a Git tree on @kernel.org for maintaining the Samsung pinctrl drivers. The tree will be maintained in a shared model between current Samsung pinctrl maintainers. Pull requests will be going to Linus Walleij. Also add the patchwork for linux-samsung-soc mailing list which will be used for handling the patches. Signed-off-by: NKrzysztof Kozlowski <krzk@kernel.org> Acked-by: NTomasz Figa <tomasz.figa@gmail.com> Acked-by: NSylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
-
由 Neil Armstrong 提交于
Fix some inverted bit numbers in some pinctrl groups and add missing pins and groups to be in pair with the GXBB pinctrl pins definition. Signed-off-by: NNeil Armstrong <narmstrong@baylibre.com> Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
-
由 John Keeping 提交于
With real-time preemption, regmap functions cannot be used in the implementation of irq_chip since they use spinlocks which may sleep. Move the setting of the mux for IRQs to an irq_bus_sync_unlock handler where we are allowed to sleep. Signed-off-by: NJohn Keeping <john@metanate.com> Reviewed-by: NHeiko Stuebner <heiko@sntech.de> Tested-by: NHeiko Stuebner <heiko@sntech.de> Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
-
由 John Keeping 提交于
We need to avoid calling regmap functions from irq handlers, so the next commit is going to move the call to rockchip_set_mux() into an irq_bus_sync_unlock handler. But we can't return an error from there so we still need to check the settings from rockchip_irq_set_type() and we will use this new rockchip_verify_mux() function from there. Signed-off-by: NJohn Keeping <john@metanate.com> Reviewed-by: NHeiko Stuebner <heiko@sntech.de> Tested-by: NHeiko Stuebner <heiko@sntech.de> Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
-
由 John Keeping 提交于
This lock is used from rockchip_irq_set_type() which is part of the irq_chip implementation and thus must use raw_spinlock_t as documented in Documentation/gpio/driver.txt. Signed-off-by: NJohn Keeping <john@metanate.com> Reviewed-by: NHeiko Stuebner <heiko@sntech.de> Tested-by: NHeiko Stuebner <heiko@sntech.de> Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
-
由 John Keeping 提交于
regmap_update_bits does its own locking and everything else accessed here is a local variable so there is no need to lock around it. Signed-off-by: NJohn Keeping <john@metanate.com> Reviewed-by: NHeiko Stuebner <heiko@sntech.de> Tested-by: NHeiko Stuebner <heiko@sntech.de> Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
-
- 24 3月, 2017 1 次提交
-
-
由 Linus Walleij 提交于
Merge tag 'sh-pfc-for-v4.12-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into devel pinctrl: sh-pfc: Updates for v4.12 - Fixes and cleanups.
-
- 23 3月, 2017 7 次提交
-
-
由 Hans de Goede 提交于
On some Cherry Trail devices the ASL uses the GMMR GPIO to access GPIOs so as to serialize MMIO accesses to GPIO registers with the OS, because: "Due to a silicon issue, a shared lock must be used to prevent concurrent accesses across the 4 GPIO controllers. See Intel Atom Z8000 Processor Series Specification Update (Rev. 005), errata #CHT34, for further information." This commit adds support for this opregion, this fixes a number of ASL errors on my Ezpad mini3 tablet and makes the otg port device/host muxing which is controlled in firmware on this model work properly. Signed-off-by: NHans de Goede <hdegoede@redhat.com> Reviewed-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: NMika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
-
由 Andy Yan 提交于
Rockchip finally named the SOC as RV1108, so change it. Signed-off-by: NAndy Yan <andy.yan@rock-chips.com> [adapted rk1108 dtsi to keep bisectability] Signed-off-by: NHeiko Stuebner <heiko@sntech.de> Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
-
由 Andy Yan 提交于
Rockchip finally named the SOC as RV1108, so change it. Also move the compatible list to one compatible per line. Signed-off-by: NAndy Yan <andy.yan@rock-chips.com> Acked-by: NRob Herring <robh@kernel.org> Signed-off-by: NHeiko Stuebner <heiko@sntech.de> Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
-
由 Jeffy Chen 提交于
Currently we are trying to enable/disable the clk of irq's gpio bank when unmask/mask irq. But the kernel's "lazy disable approach" will skip masking irq when the irq chip doesn't support irq_disable ops. So we may hit this case: irq_enable-> enable clk irq_disable-> noop irq_enable-> enable clk again irq_disable-> noop Signed-off-by: NJeffy Chen <jeffy.chen@rock-chips.com> Reviewed-by: NHeiko Stuebner <heiko@sntech.de> Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
-
由 Masahiro Yamada 提交于
At first these drivers were written as tristate, but the module usecases are actually not tested. Make all of them boolean. Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
-
由 Masahiro Yamada 提交于
Since commit 3e030b0b ("pinctrl: uniphier: allow to have pinctrl node under syscon node"), this driver has kept compatibility for the old DT files. Several releases have passed since then, so remove the obsoleted compatibles and clean up the code. Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
-
由 Martin Blumenstingl 提交于
This adds support for the missing PWM pins on Meson GXL SoCs, namely: - PWM_A - PWM_B - PWM_C - PWM_F (GPIOX_7 and GPIOCLK_1 can be selected as output) - PWM_AO_A (GPIOAO_3 and GPIOAO_8 can be selected as output) Signed-off-by: NMartin Blumenstingl <martin.blumenstingl@googlemail.com> Tested-by: NNeil Armstrong <narmstrong@baylibre.com> Reviewed-by: NNeil Armstrong <narmstrong@baylibre.com> Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
-
- 21 3月, 2017 3 次提交
-
-
由 Geert Uytterhoeven 提交于
Update the sh_pfc_soc_info pointer after calling the SoC-specific initialization function, as it may have been updated to e.g. handle different SoC revisions. This makes sure the correct subdriver name is printed later. Fixes: 0c151062 ("sh-pfc: Add support for SoC-specific initialization") Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be>
-
由 Geert Uytterhoeven 提交于
Somehow the QSPI and SCIF_CLK fragments were inserted at the wrong positions. Restore sort order (alphabetically, per group). Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be>
-
由 Geert Uytterhoeven 提交于
Fix typos in hscif2_clk_b_mux[] and hscif4_ctrl_mux[]. Fixes: a56069c4 ("pinctrl: sh-pfc: r8a7795: Add HSCIF pins, groups, and functions") Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be>
-
- 16 3月, 2017 5 次提交
-
-
由 Julia Cartwright 提交于
The sunxi pinctrl driver currently implement an irq_chip for handling interrupts; due to how irq_chip handling is done, it's necessary for the irq_chip methods to be invoked from hardirq context, even on a a real-time kernel. Because the spinlock_t type becomes a "sleeping" spinlock w/ RT kernels, it is not suitable to be used with irq_chips. A quick audit of the operations under the lock reveal that they do only minimal, bounded work, and are therefore safe to do under a raw spinlock. Signed-off-by: NJulia Cartwright <julia@ni.com> Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
-
由 Julia Cartwright 提交于
The sirf atlas7 pinctrl drivers currently implement an irq_chip for handling interrupts; due to how irq_chip handling is done, it's necessary for the irq_chip methods to be invoked from hardirq context, even on a a real-time kernel. Because the spinlock_t type becomes a "sleeping" spinlock w/ RT kernels, it is not suitable to be used with irq_chips. A quick audit of the operations under the lock reveal that they do only minimal, bounded work, and are therefore safe to do under a raw spinlock. Signed-off-by: NJulia Cartwright <julia@ni.com> Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
-
由 Julia Cartwright 提交于
The amd pinctrl drivers currently implement an irq_chip for handling interrupts; due to how irq_chip handling is done, it's necessary for the irq_chip methods to be invoked from hardirq context, even on a a real-time kernel. Because the spinlock_t type becomes a "sleeping" spinlock w/ RT kernels, it is not suitable to be used with irq_chips. A quick audit of the operations under the lock reveal that they do only minimal, bounded work, and are therefore safe to do under a raw spinlock. Signed-off-by: NJulia Cartwright <julia@ni.com> Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
-
由 Julia Cartwright 提交于
The bcm pinctrl drivers currently implement an irq_chip for handling interrupts; due to how irq_chip handling is done, it's necessary for the irq_chip methods to be invoked from hardirq context, even on a a real-time kernel. Because the spinlock_t type becomes a "sleeping" spinlock w/ RT kernels, it is not suitable to be used with irq_chips. A quick audit of the operations under the lock reveal that they do only minimal, bounded work, and are therefore safe to do under a raw spinlock. Signed-off-by: NJulia Cartwright <julia@ni.com> Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
-
由 Timur Tabi 提交于
The sysfs and debugfs entries for pin control drivers work better when the individual pins are given real names, even if they are all just "gpio0", "gpio1", etc. Signed-off-by: NTimur Tabi <timur@codeaurora.org> Acked-by: NBjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
-
- 14 3月, 2017 13 次提交
-
-
由 david.wu 提交于
Signed-off-by: NDavid Wu <david.wu@rock-chips.com> Reviewed-by: NHeiko Stuebner <heiko@sntech.de> Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
-
由 david.wu 提交于
To prevent external signal crosstalk, some pins need to enable input schmitt, like i2c pins, 32k-input pin and so on. Signed-off-by: NDavid Wu <david.wu@rock-chips.com> Reviewed-by: NHeiko Stuebner <heiko@sntech.de> Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
-
由 Icenowy Zheng 提交于
Allwinner pin controllers are also GPIO controllers. Currently, if GPIOLIB is forgot to be chosen, the build of pinctrl-sunxi.c will fail for lacking a lot of gpiochip_* functions. Select GPIOLIB to ensure this driver can be built. Signed-off-by: NIcenowy Zheng <icenowy@aosc.xyz> Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
-
由 Icenowy Zheng 提交于
The A64 has a R_PIO pin controller, similar to the one found on the H3 SoC. Add support for the pins controlled by the R_PIO controller. Signed-off-by: NIcenowy Zheng <icenowy@aosc.xyz> Acked-by: NChen-Yu Tsai <wens@csie.org> Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
-
由 Icenowy Zheng 提交于
Allwinner A64 SoC has also a dedicated pin controller for Port L GPIOs, which is called "Port Controller (CPUs-PORT)" in SoC User Manual. Add a binding for this pin controller, like the ones in A23/33 and H3. Signed-off-by: NIcenowy Zheng <icenowy@aosc.xyz> Acked-by: NChen-Yu Tsai <wens@csie.org> Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
-
由 Icenowy Zheng 提交于
The compatible for Allwinner H5 pin controller is wrong written as allwinner,sun50i-h5-r-pinctrl, however, it's really a generic pinctrl rather than a "r" one. Fix this compatible string. Signed-off-by: NIcenowy Zheng <icenowy@aosc.xyz> Acked-by: NMaxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
-
由 Icenowy Zheng 提交于
ARM64 Allwinner SoCs used to have every pinctrl driver selected in ARCH_SUNXI. Change this to make their default value to (ARM64 && ARCH_SUNXI). Signed-off-by: NIcenowy Zheng <icenowy@aosc.xyz> Reviewed-by: NAndre Przywara <andre.przywara@arm.com> Acked-by: NMaxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
-
由 Andy Shevchenko 提交于
Just fix spelling typos in comments. Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
-
由 Rick Altherr 提交于
Port D and port E GPIO loopback modes are commonly enabled via hardware straps for use with front-panel buttons. When the BMC is powered off or fails to boot, the front-panel buttons are directly connected to the host chipset via the loopback to allow direct power-on and reset control. Once the BMC has booted, the loopback mode must be disabled for the BMC to take over control of host power-on and reset. Disabling these loopback modes requires writing to the hardware strap register which violates the current design of assuming the system designer chose the strap settings for a specific reason and they should be treated as read-only. Only the two bits of the strap register related to these loopback modes are allowed to be written and comments have been added to explain why. Signed-off-by: NRick Altherr <raltherr@google.com> Acked-by: NJoel Stanley <joel@jms.id.au> Reviewed-by: NAndrew Jeffery <andrew@aj.id.au> Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
-
由 david.wu 提交于
Note, the iomux of following pins are special, need to be recalculated specially. - gpio2_b4 - gpio2_b7 - gpio2_c7 Signed-off-by: NDavid Wu <david.wu@rock-chips.com> Reviewed-by: NHeiko Stuebner <heiko@sntech.de> Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
-
由 david.wu 提交于
Some pins are special at a bank so that add IOMUX_RECALCED type to indicate which iomux source of the bank need to be recalculated. If the mux recalculateed callback and IOMUX_RECALCED type were set, recalculate the pins' iomux by using mux recalculated data struct. Signed-off-by: NDavid Wu <david.wu@rock-chips.com> Reviewed-by: NHeiko Stuebner <heiko@sntech.de> Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
-
由 david.wu 提交于
This patch supports 3bit width iomux type. Signed-off-by: NDavid Wu <david.wu@rock-chips.com> Reviewed-by: NHeiko Stuebner <heiko@sntech.de> Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
-
由 Charles Keepax 提交于
The local variable drvdata is not used in samsung_gpio_set_direction. Signed-off-by: NCharles Keepax <ckeepax@opensource.wolfsonmicro.com> Reviewed-by: NKrzysztof Kozlowski <krzk@kernel.org> Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
-
- 06 3月, 2017 2 次提交
-
-
由 Charles Keepax 提交于
Signed-off-by: NCharles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
-
由 Linus Torvalds 提交于
-
- 05 3月, 2017 1 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net由 Linus Torvalds 提交于
Pull networking fixes from David Miller: 1) Fix double-free in batman-adv, from Sven Eckelmann. 2) Fix packet stats for fast-RX path, from Joannes Berg. 3) Netfilter's ip_route_me_harder() doesn't handle request sockets properly, fix from Florian Westphal. 4) Fix sendmsg deadlock in rxrpc, from David Howells. 5) Add missing RCU locking to transport hashtable scan, from Xin Long. 6) Fix potential packet loss in mlxsw driver, from Ido Schimmel. 7) Fix race in NAPI handling between poll handlers and busy polling, from Eric Dumazet. 8) TX path in vxlan and geneve need proper RCU locking, from Jakub Kicinski. 9) SYN processing in DCCP and TCP need to disable BH, from Eric Dumazet. 10) Properly handle net_enable_timestamp() being invoked from IRQ context, also from Eric Dumazet. 11) Fix crash on device-tree systems in xgene driver, from Alban Bedel. 12) Do not call sk_free() on a locked socket, from Arnaldo Carvalho de Melo. 13) Fix use-after-free in netvsc driver, from Dexuan Cui. 14) Fix max MTU setting in bonding driver, from WANG Cong. 15) xen-netback hash table can be allocated from softirq context, so use GFP_ATOMIC. From Anoob Soman. 16) Fix MAC address change bug in bgmac driver, from Hari Vyas. 17) strparser needs to destroy strp_wq on module exit, from WANG Cong. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (69 commits) strparser: destroy workqueue on module exit sfc: fix IPID endianness in TSOv2 sfc: avoid max() in array size rds: remove unnecessary returned value check rxrpc: Fix potential NULL-pointer exception nfp: correct DMA direction in XDP DMA sync nfp: don't tell FW about the reserved buffer space net: ethernet: bgmac: mac address change bug net: ethernet: bgmac: init sequence bug xen-netback: don't vfree() queues under spinlock xen-netback: keep a local pointer for vif in backend_disconnect() netfilter: nf_tables: don't call nfnetlink_set_err() if nfnetlink_send() fails netfilter: nft_set_rbtree: incorrect assumption on lower interval lookups netfilter: nf_conntrack_sip: fix wrong memory initialisation can: flexcan: fix typo in comment can: usb_8dev: Fix memory leak of priv->cmd_msg_buffer can: gs_usb: fix coding style can: gs_usb: Don't use stack memory for USB transfers ixgbe: Limit use of 2K buffers on architectures with 256B or larger cache lines ixgbe: update the rss key on h/w, when ethtool ask for it ...
-