commit b4f9a1a87a48c255bb90d8a6c3d555a1abb88130 upstream.

When doing an incremental send operation we can fail if we previously did
deduplication operations against a file that exists in both snapshots. In
that case we will fail the send operation with -EIO and print a message
to dmesg/syslog like the following:

  BTRFS error (device sdc): Send: inconsistent snapshot, found updated \
  extent for inode 257 without updated inode item, send root is 258, \
  parent root is 257

This requires that we deduplicate to the same file in both snapshots for
the same amount of times on each snapshot. The issue happens because a
deduplication only updates the iversion of an inode and does not update
any other field of the inode, therefore if we deduplicate the file on
each snapshot for the same amount of time, the inode will have the same
iversion value (stored as the "sequence" field on the inode item) on both
snapshots, therefore it will be seen as unchanged between in the send
snapshot while there are new/updated/deleted extent items when comparing
to the parent snapshot. This makes the send operation return -EIO and
print an error message.

Example reproducer:

  $ mkfs.btrfs -f /dev/sdb
  $ mount /dev/sdb /mnt

  # Create our first file. The first half of the file has several 64Kb
  # extents while the second half as a single 512Kb extent.
  $ xfs_io -f -s -c "pwrite -S 0xb8 -b 64K 0 512K" /mnt/foo
  $ xfs_io -c "pwrite -S 0xb8 512K 512K" /mnt/foo

  # Create the base snapshot and the parent send stream from it.
  $ btrfs subvolume snapshot -r /mnt /mnt/mysnap1
  $ btrfs send -f /tmp/1.snap /mnt/mysnap1

  # Create our second file, that has exactly the same data as the first
  # file.
  $ xfs_io -f -c "pwrite -S 0xb8 0 1M" /mnt/bar

  # Create the second snapshot, used for the incremental send, before
  # doing the file deduplication.
  $ btrfs subvolume snapshot -r /mnt /mnt/mysnap2

  # Now before creating the incremental send stream:
  #
  # 1) Deduplicate into a subrange of file foo in snapshot mysnap1. This
  #    will drop several extent items and add a new one, also updating
  #    the inode's iversion (sequence field in inode item) by 1, but not
  #    any other field of the inode;
  #
  # 2) Deduplicate into a different subrange of file foo in snapshot
  #    mysnap2. This will replace an extent item with a new one, also
  #    updating the inode's iversion by 1 but not any other field of the
  #    inode.
  #
  # After these two deduplication operations, the inode items, for file
  # foo, are identical in both snapshots, but we have different extent
  # items for this inode in both snapshots. We want to check this doesn't
  # cause send to fail with an error or produce an incorrect stream.

  $ xfs_io -r -c "dedupe /mnt/bar 0 0 512K" /mnt/mysnap1/foo
  $ xfs_io -r -c "dedupe /mnt/bar 512K 512K 512K" /mnt/mysnap2/foo

  # Create the incremental send stream.
  $ btrfs send -p /mnt/mysnap1 -f /tmp/2.snap /mnt/mysnap2
  ERROR: send ioctl failed with -5: Input/output error

This issue started happening back in 2015 when deduplication was updated
to not update the inode's ctime and mtime and update only the iversion.
Back then we would hit a BUG_ON() in send, but later in 2016 send was
updated to return -EIO and print the error message instead of doing the
BUG_ON().

A test case for fstests follows soon.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=203933
Fixes: 1c919a5e ("btrfs: don't update mtime/ctime on deduped inodes")
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: NFilipe Manana <fdmanana@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 5241ab4cf42d3a93b933b55d3d53f43049081fa1 upstream.

CLANG_FLAGS is initialized by the following line:

  CLANG_FLAGS     := --target=$(notdir $(CROSS_COMPILE:%-=%))

..., which is run only when CROSS_COMPILE is set.

Some build targets (bindeb-pkg etc.) recurse to the top Makefile.

When you build the kernel with Clang but without CROSS_COMPILE,
the same compiler flags such as -no-integrated-as are accumulated
into CLANG_FLAGS.

If you run 'make CC=clang' and then 'make CC=clang bindeb-pkg',
Kbuild will recompile everything needlessly due to the build command
change.

Fix this by correctly initializing CLANG_FLAGS.

Fixes: 238bcbc4e07f ("kbuild: consolidate Clang compiler flags")
Cc: <stable@vger.kernel.org> # v5.0+
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: NNathan Chancellor <natechancellor@gmail.com>
Acked-by: NNick Desaulniers <ndesaulniers@google.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 0c5b6c28ed68becb692b43eae5e44d5aa7e160ce upstream.

Prior to this commit, starting nconfig, xconfig or gconfig, and saving
the .config file more than once caused data loss, where a .config file
that contained only comments would be written to disk starting from the
second save operation.

This bug manifests itself because the SYMBOL_WRITTEN flag is never
cleared after the first call to conf_write, and subsequent calls to
conf_write then skip all of the configuration symbols due to the
SYMBOL_WRITTEN flag being set.

This commit resolves this issue by clearing the SYMBOL_WRITTEN flag
from all symbols before conf_write returns.

Fixes: 8e2442a5f86e ("kconfig: fix missing choice values in auto.conf")
Cc: linux-stable <stable@vger.kernel.org> # 4.19+
Signed-off-by: NM. Vefa Bicakci <m.v.b@runbox.com>
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 09b90e2fe35faeace2488234e2a7728f2ea8ba26 ]

In nouveau_conn_reset(), if connector->state is true,
__drm_atomic_helper_connector_destroy_state() will be called,
but the memory pointed by asyc isn't freed. Memory leak happens
in the following function __drm_atomic_helper_connector_reset(),
where newly allocated asyc->state will be assigned to connector->state.

So using nouveau_conn_atomic_destroy_state() instead of
__drm_atomic_helper_connector_destroy_state to free the "old" asyc.

Here the is the log showing memory leak.

unreferenced object 0xffff8c5480483c80 (size 192):
  comm "kworker/0:2", pid 188, jiffies 4294695279 (age 53.179s)
  hex dump (first 32 bytes):
    00 f0 ba 7b 54 8c ff ff 00 00 00 00 00 00 00 00  ...{T...........
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<000000005005c0d0>] kmem_cache_alloc_trace+0x195/0x2c0
    [<00000000a122baed>] nouveau_conn_reset+0x25/0xc0 [nouveau]
    [<000000004fd189a2>] nouveau_connector_create+0x3a7/0x610 [nouveau]
    [<00000000c73343a8>] nv50_display_create+0x343/0x980 [nouveau]
    [<000000002e2b03c3>] nouveau_display_create+0x51f/0x660 [nouveau]
    [<00000000c924699b>] nouveau_drm_device_init+0x182/0x7f0 [nouveau]
    [<00000000cc029436>] nouveau_drm_probe+0x20c/0x2c0 [nouveau]
    [<000000007e961c3e>] local_pci_probe+0x47/0xa0
    [<00000000da14d569>] work_for_cpu_fn+0x1a/0x30
    [<0000000028da4805>] process_one_work+0x27c/0x660
    [<000000001d415b04>] worker_thread+0x22b/0x3f0
    [<0000000003b69f1f>] kthread+0x12f/0x150
    [<00000000c94c29b7>] ret_from_fork+0x3a/0x50
Signed-off-by: NYongxin Liu <yongxin.liu@windriver.com>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 8c5477e8046ca139bac250386c08453da37ec1ae ]

Kernel build warns:
 'sanitize_boot_params' defined but not used [-Wunused-function]

at below files:
  arch/x86/boot/compressed/cmdline.c
  arch/x86/boot/compressed/error.c
  arch/x86/boot/compressed/early_serial_console.c
  arch/x86/boot/compressed/acpi.c

That's becausethey each include misc.h which includes a definition of
sanitize_boot_params() via bootparam_utils.h.

Remove the inclusion from misc.h and have the c file including
bootparam_utils.h directly.
Signed-off-by: NZhenzhong Duan <zhenzhong.duan@oracle.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/1563283092-1189-1-git-send-email-zhenzhong.duan@oracle.comSigned-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 083db6764821996526970e42d09c1ab2f4155dd4 ]

The __raw_callee_save_*() functions have an ELF symbol size of zero,
which confuses objtool and other tools.

Fixes a bunch of warnings like the following:

  arch/x86/xen/mmu_pv.o: warning: objtool: __raw_callee_save_xen_pte_val() is missing an ELF size annotation
  arch/x86/xen/mmu_pv.o: warning: objtool: __raw_callee_save_xen_pgd_val() is missing an ELF size annotation
  arch/x86/xen/mmu_pv.o: warning: objtool: __raw_callee_save_xen_make_pte() is missing an ELF size annotation
  arch/x86/xen/mmu_pv.o: warning: objtool: __raw_callee_save_xen_make_pgd() is missing an ELF size annotation
Signed-off-by: NJosh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Reviewed-by: NJuergen Gross <jgross@suse.com>
Acked-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/afa6d49bb07497ca62e4fc3b27a2d0cece545b4e.1563413318.git.jpoimboe@redhat.comSigned-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 3901336ed9887b075531bffaeef7742ba614058b ]

After making a change to improve objtool's sibling call detection, it
started showing the following warning:

  arch/x86/kvm/vmx/nested.o: warning: objtool: .fixup+0x15: sibling call from callable instruction with modified stack frame

The problem is the ____kvm_handle_fault_on_reboot() macro.  It does a
fake call by pushing a fake RIP and doing a jump.  That tricks the
unwinder into printing the function which triggered the exception,
rather than the .fixup code.

Instead of the hack to make it look like the original function made the
call, just change the macro so that the original function actually does
make the call.  This allows removal of the hack, and also makes objtool
happy.

I triggered a vmx instruction exception and verified that the stack
trace is still sane:

  kernel BUG at arch/x86/kvm/x86.c:358!
  invalid opcode: 0000 [#1] SMP PTI
  CPU: 28 PID: 4096 Comm: qemu-kvm Not tainted 5.2.0+ #16
  Hardware name: Lenovo THINKSYSTEM SD530 -[7X2106Z000]-/-[7X2106Z000]-, BIOS -[TEE113Z-1.00]- 07/17/2017
  RIP: 0010:kvm_spurious_fault+0x5/0x10
  Code: 00 00 00 00 00 8b 44 24 10 89 d2 45 89 c9 48 89 44 24 10 8b 44 24 08 48 89 44 24 08 e9 d4 40 22 00 0f 1f 40 00 0f 1f 44 00 00 <0f> 0b 66 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 41 55 49 89 fd 41
  RSP: 0018:ffffbf91c683bd00 EFLAGS: 00010246
  RAX: 000061f040000000 RBX: ffff9e159c77bba0 RCX: ffff9e15a5c87000
  RDX: 0000000665c87000 RSI: ffff9e15a5c87000 RDI: ffff9e159c77bba0
  RBP: 0000000000000000 R08: 0000000000000000 R09: ffff9e15a5c87000
  R10: 0000000000000000 R11: fffff8f2d99721c0 R12: ffff9e159c77bba0
  R13: ffffbf91c671d960 R14: ffff9e159c778000 R15: 0000000000000000
  FS:  00007fa341cbe700(0000) GS:ffff9e15b7400000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 00007fdd38356804 CR3: 00000006759de003 CR4: 00000000007606e0
  DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
  DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
  PKRU: 55555554
  Call Trace:
   loaded_vmcs_init+0x4f/0xe0
   alloc_loaded_vmcs+0x38/0xd0
   vmx_create_vcpu+0xf7/0x600
   kvm_vm_ioctl+0x5e9/0x980
   ? __switch_to_asm+0x40/0x70
   ? __switch_to_asm+0x34/0x70
   ? __switch_to_asm+0x40/0x70
   ? __switch_to_asm+0x34/0x70
   ? free_one_page+0x13f/0x4e0
   do_vfs_ioctl+0xa4/0x630
   ksys_ioctl+0x60/0x90
   __x64_sys_ioctl+0x16/0x20
   do_syscall_64+0x55/0x1c0
   entry_SYSCALL_64_after_hwframe+0x44/0xa9
  RIP: 0033:0x7fa349b1ee5b
Signed-off-by: NJosh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Acked-by: NPaolo Bonzini <pbonzini@redhat.com>
Acked-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/64a9b64d127e87b6920a97afde8e96ea76f6524e.1563413318.git.jpoimboe@redhat.comSigned-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit b23e5844dfe78a80ba672793187d3f52e4b528d7 ]

Commit 7457c0da024b ("x86/alternatives: Add int3_emulate_call()
selftest") is used to ensure there is a gap setup in int3 exception stack
which could be used for inserting call return address.

This gap is missed in XEN PV int3 exception entry path, then below panic
triggered:

[    0.772876] general protection fault: 0000 [#1] SMP NOPTI
[    0.772886] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.2.0+ #11
[    0.772893] RIP: e030:int3_magic+0x0/0x7
[    0.772905] RSP: 3507:ffffffff82203e98 EFLAGS: 00000246
[    0.773334] Call Trace:
[    0.773334]  alternative_instructions+0x3d/0x12e
[    0.773334]  check_bugs+0x7c9/0x887
[    0.773334]  ? __get_locked_pte+0x178/0x1f0
[    0.773334]  start_kernel+0x4ff/0x535
[    0.773334]  ? set_init_arg+0x55/0x55
[    0.773334]  xen_start_kernel+0x571/0x57a

For 64bit PV guests, Xen's ABI enters the kernel with using SYSRET, with
%rcx/%r11 on the stack. To convert back to "normal" looking exceptions,
the xen thunks do 'xen_*: pop %rcx; pop %r11; jmp *'.

E.g. Extracting 'xen_pv_trap xenint3' we have:
xen_xenint3:
 pop %rcx;
 pop %r11;
 jmp xenint3

As xenint3 and int3 entry code are same except xenint3 doesn't generate
a gap, we can fix it by using int3 and drop useless xenint3.
Signed-off-by: NZhenzhong Duan <zhenzhong.duan@oracle.com>
Reviewed-by: NJuergen Gross <jgross@suse.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: NJuergen Gross <jgross@suse.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit dedfde2fe1c4ccf27179fcb234e2112d065c39bb ]

Spectrum systems use DSCP rewrite map to update DSCP field in egressing
packets to correspond to priority that the packet has. Whether rewriting
will take place is determined at the point when the packet ingresses the
switch: if the port is in Trust L3 mode, packet priority is determined from
the DSCP map at the port, and DSCP rewrite will happen. If the port is in
Trust L2 mode, 802.1p is used for packet prioritization, and no DSCP
rewrite will happen.

The driver determines the port trust mode based on whether any DSCP
prioritization rules are in effect at given port. If there are any, trust
level is L3, otherwise it's L2. When the last DSCP rule is removed, the
port is switched to trust L2. Under that scenario, if DSCP of a packet
should be rewritten, it should be rewritten to 0.

However, when switching to Trust L2, the driver neglects to also update the
DSCP rewrite map. The last DSCP rule thus remains in effect, and packets
egressing through this port, if they have the right priority, will have
their DSCP set according to this rule.

Fix by first configuring the rewrite map, and only then switching to trust
L2 and bailing out.

Fixes: b2b1dab6 ("mlxsw: spectrum: Support ieee_setapp, ieee_delapp")
Signed-off-by: NPetr Machata <petrm@mellanox.com>
Reported-by: NAlex Veber <alexve@mellanox.com>
Tested-by: NAlex Veber <alexve@mellanox.com>
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit a318f12ed8843cfac53198390c74a565c632f417 ]

Andreas Christoforou reported:

  UBSAN: Undefined behaviour in ipc/mqueue.c:414:49 signed integer overflow:
  9 * 2305843009213693951 cannot be represented in type 'long int'
  ...
  Call Trace:
    mqueue_evict_inode+0x8e7/0xa10 ipc/mqueue.c:414
    evict+0x472/0x8c0 fs/inode.c:558
    iput_final fs/inode.c:1547 [inline]
    iput+0x51d/0x8c0 fs/inode.c:1573
    mqueue_get_inode+0x8eb/0x1070 ipc/mqueue.c:320
    mqueue_create_attr+0x198/0x440 ipc/mqueue.c:459
    vfs_mkobj+0x39e/0x580 fs/namei.c:2892
    prepare_open ipc/mqueue.c:731 [inline]
    do_mq_open+0x6da/0x8e0 ipc/mqueue.c:771

Which could be triggered by:

        struct mq_attr attr = {
                .mq_flags = 0,
                .mq_maxmsg = 9,
                .mq_msgsize = 0x1fffffffffffffff,
                .mq_curmsgs = 0,
        };

        if (mq_open("/testing", 0x40, 3, &attr) == (mqd_t) -1)
                perror("mq_open");

mqueue_get_inode() was correctly rejecting the giant mq_msgsize, and
preparing to return -EINVAL.  During the cleanup, it calls
mqueue_evict_inode() which performed resource usage tracking math for
updating "user", before checking if there was a valid "user" at all
(which would indicate that the calculations would be sane).  Instead,
delay this check to after seeing a valid "user".

The overflow was real, but the results went unused, so while the flaw is
harmless, it's noisy for kernel fuzzers, so just fix it by moving the
calculation under the non-NULL "user" where it actually gets used.

Link: http://lkml.kernel.org/r/201906072207.ECB65450@keescookSigned-off-by: NKees Cook <keescook@chromium.org>
Reported-by: NAndreas Christoforou <andreaschristofo@gmail.com>
Acked-by: N"Eric W. Biederman" <ebiederm@xmission.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 156e0b1a8112b76e351684ac948c59757037ac36 ]

The dev_info.name[] array has space for RIO_MAX_DEVNAME_SZ + 1
characters.  But the problem here is that we don't ensure that the user
put a NUL terminator on the end of the string.  It could lead to an out
of bounds read.

Link: http://lkml.kernel.org/r/20190529110601.GB19119@mwanda
Fixes: e8de3701 ("rapidio: add mport char device driver")
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Acked-by: NAlexandre Bounine <alex.bou9@gmail.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit f90fb3c7e2c13ae829db2274b88b845a75038b8a ]

Only users of upc_req in kernel side fs/coda/psdev.c and
fs/coda/upcall.c already include linux/coda_psdev.h.

Suggested by Jan Harkes <jaharkes@cs.cmu.edu> in
  https://lore.kernel.org/lkml/20150531111913.GA23377@cs.cmu.edu/

Fixes these include/uapi/linux/coda_psdev.h compilation errors in userspace:

  linux/coda_psdev.h:12:19: error: field `uc_chain' has incomplete type
  struct list_head    uc_chain;
                   ^
  linux/coda_psdev.h:13:2: error: unknown type name `caddr_t'
  caddr_t             uc_data;
  ^
  linux/coda_psdev.h:14:2: error: unknown type name `u_short'
  u_short             uc_flags;
  ^
  linux/coda_psdev.h:15:2: error: unknown type name `u_short'
  u_short             uc_inSize;  /* Size is at most 5000 bytes */
  ^
  linux/coda_psdev.h:16:2: error: unknown type name `u_short'
  u_short             uc_outSize;
  ^
  linux/coda_psdev.h:17:2: error: unknown type name `u_short'
  u_short             uc_opcode;  /* copied from data to save lookup */
  ^
  linux/coda_psdev.h:19:2: error: unknown type name `wait_queue_head_t'
  wait_queue_head_t   uc_sleep;   /* process' wait queue */
  ^

Link: http://lkml.kernel.org/r/9f99f5ce6a0563d5266e6cf7aa9585aac2cae971.1558117389.git.jaharkes@cs.cmu.eduSigned-off-by: NMikko Rapeli <mikko.rapeli@iki.fi>
Signed-off-by: NJan Harkes <jaharkes@cs.cmu.edu>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Colin Ian King <colin.king@canonical.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Fabian Frederick <fabf@skynet.be>
Cc: Sam Protsenko <semen.protsenko@linaro.org>
Cc: Yann Droneaud <ydroneaud@opteya.com>
Cc: Zhouyang Jia <jiazhouyang09@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit b2a57e334086602be56b74958d9f29b955cd157f ]

The kernel is self-contained project and can be built with bare-metal
toolchain.  But bare-metal toolchain doesn't define __linux__.  Because
of this u_quad_t type is not defined when using bare-metal toolchain and
codafs build fails.  This patch fixes it by defining u_quad_t type
unconditionally.

Link: http://lkml.kernel.org/r/3cbb40b0a57b6f9923a9d67b53473c0b691a3eaa.1558117389.git.jaharkes@cs.cmu.eduSigned-off-by: NSam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: NJan Harkes <jaharkes@cs.cmu.edu>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Colin Ian King <colin.king@canonical.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Fabian Frederick <fabf@skynet.be>
Cc: Mikko Rapeli <mikko.rapeli@iki.fi>
Cc: Yann Droneaud <ydroneaud@opteya.com>
Cc: Zhouyang Jia <jiazhouyang09@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 02551c23bcd85f0c68a8259c7b953d49d44f86af ]

When fget fails, the lack of error-handling code may cause unexpected
results.

This patch adds error-handling code after calling fget.

Link: http://lkml.kernel.org/r/2514ec03df9c33b86e56748513267a80dd8004d9.1558117389.git.jaharkes@cs.cmu.eduSigned-off-by: NZhouyang Jia <jiazhouyang09@gmail.com>
Signed-off-by: NJan Harkes <jaharkes@cs.cmu.edu>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Colin Ian King <colin.king@canonical.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Fabian Frederick <fabf@skynet.be>
Cc: Mikko Rapeli <mikko.rapeli@iki.fi>
Cc: Sam Protsenko <semen.protsenko@linaro.org>
Cc: Yann Droneaud <ydroneaud@opteya.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 33d6e0ff68af74be0c846c8e042e84a9a1a0561e ]

If a memsetXX implementation is completely broken and fails in the first
iteration, when i, j, and k are all zero, the failure is masked as zero
is returned.  Failing in the first iteration is perhaps the most likely
failure, so this makes the tests pretty much useless.  Avoid the
situation by always setting a random unused bit in the result on
failure.

Link: http://lkml.kernel.org/r/20190506124634.6807-3-peda@axentia.se
Fixes: 03270c13 ("lib/string.c: add testcases for memset16/32/64")
Signed-off-by: NPeter Rosin <peda@axentia.se>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 8e060c21ae2c265a2b596e9e7f9f97ec274151a4 ]

This adds __GFP_NOWARN to the kmalloc()-portions of the overflow test to
avoid tainting the kernel.  Additionally fixes up the math on wrap size
to be architecture and page size agnostic.

Link: http://lkml.kernel.org/r/201905282012.0A8767E24@keescook
Fixes: ca90800a ("test_overflow: Add memory allocation overflow tests")
Signed-off-by: NKees Cook <keescook@chromium.org>
Reported-by: NRandy Dunlap <rdunlap@infradead.org>
Suggested-by: NRasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit c633324e311243586675e732249339685e5d6faa ]

The description of cma_declare_contiguous() indicates that if the
'fixed' argument is true the reserved contiguous area must be exactly at
the address of the 'base' argument.

However, the function currently allows the 'base', 'size', and 'limit'
arguments to be silently adjusted to meet alignment constraints.  This
commit enforces the documented behavior through explicit checks that
return an error if the region does not fit within a specified region.

Link: http://lkml.kernel.org/r/1561422051-16142-1-git-send-email-opendmb@gmail.com
Fixes: 5ea3b1b2 ("cma: add placement specifier for "cma=" kernel parameter")
Signed-off-by: NDoug Berger <opendmb@gmail.com>
Acked-by: NMichal Nazarewicz <mina86@mina86.com>
Cc: Yue Hu <huyue2@yulong.com>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Laura Abbott <labbott@redhat.com>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 29e7e9664aec17b94a9c8c5a75f8d216a206aa3a ]

clang warns about a few parts of the math-emu implementation
where a 16-bit integer becomes negative during assignment:

arch/x86/math-emu/poly_tan.c:88:35: error: implicit conversion from 'int' to 'short' changes value from 49216 to -16320 [-Werror,-Wconstant-conversion]
                                      (0x41 + EXTENDED_Ebias) | SIGN_Negative);
                                      ~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~
arch/x86/math-emu/fpu_emu.h:180:58: note: expanded from macro 'setexponent16'
 #define setexponent16(x,y)  { (*(short *)&((x)->exp)) = (y); }
                                                      ~  ^
arch/x86/math-emu/reg_constant.c:37:32: error: implicit conversion from 'int' to 'short' changes value from 49085 to -16451 [-Werror,-Wconstant-conversion]
FPU_REG const CONST_PI2extra = MAKE_REG(NEG, -66,
                               ^~~~~~~~~~~~~~~~~~
arch/x86/math-emu/reg_constant.c:21:25: note: expanded from macro 'MAKE_REG'
                ((EXTENDED_Ebias+(e)) | ((SIGN_##s != 0)*0x8000)) }
                 ~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~
arch/x86/math-emu/reg_constant.c:48:28: error: implicit conversion from 'int' to 'short' changes value from 65535 to -1 [-Werror,-Wconstant-conversion]
FPU_REG const CONST_QNaN = MAKE_REG(NEG, EXP_OVER, 0x00000000, 0xC0000000);
                           ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
arch/x86/math-emu/reg_constant.c:21:25: note: expanded from macro 'MAKE_REG'
                ((EXTENDED_Ebias+(e)) | ((SIGN_##s != 0)*0x8000)) }
                 ~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~

The code is correct as is, so add a typecast to shut up the warnings.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20190712090816.350668-1-arnd@arndb.deSigned-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit ec6335586953b0df32f83ef696002063090c7aef ]

There are many compiler warnings like this,

In file included from ./arch/x86/include/asm/smp.h:13,
                 from ./arch/x86/include/asm/mmzone_64.h:11,
                 from ./arch/x86/include/asm/mmzone.h:5,
                 from ./include/linux/mmzone.h:969,
                 from ./include/linux/gfp.h:6,
                 from ./include/linux/mm.h:10,
                 from arch/x86/kernel/apic/io_apic.c:34:
arch/x86/kernel/apic/io_apic.c: In function 'check_timer':
./arch/x86/include/asm/apic.h:37:11: warning: comparison of unsigned
expression >= 0 is always true [-Wtype-limits]
   if ((v) <= apic_verbosity) \
           ^~
arch/x86/kernel/apic/io_apic.c:2160:2: note: in expansion of macro
'apic_printk'
  apic_printk(APIC_QUIET, KERN_INFO "..TIMER: vector=0x%02X "
  ^~~~~~~~~~~
./arch/x86/include/asm/apic.h:37:11: warning: comparison of unsigned
expression >= 0 is always true [-Wtype-limits]
   if ((v) <= apic_verbosity) \
           ^~
arch/x86/kernel/apic/io_apic.c:2207:4: note: in expansion of macro
'apic_printk'
    apic_printk(APIC_QUIET, KERN_ERR "..MP-BIOS bug: "
    ^~~~~~~~~~~

APIC_QUIET is 0, so silence them by making apic_verbosity type int.
Signed-off-by: NQian Cai <cai@lca.pw>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/1562621805-24789-1-git-send-email-cai@lca.pwSigned-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 7429c6c0d9cb086d8e79f0d2a48ae14851d2115e ]

While changing the number of interrupt channels, be2net stops adapter
operation (including netif_tx_disable()) but it doesn't signal that it
cannot transmit. This may lead dev_watchdog() to falsely trigger during
that time.

Add the missing call to netif_carrier_off(), following the pattern used in
many other drivers. netif_carrier_on() is already taken care of in
be_open().
Signed-off-by: NBenjamin Poirier <bpoirier@suse.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit dfd6f9ad36368b8dbd5f5a2b2f0a4705ae69a323 ]

clang gets confused by an uninitialized variable in what looks
to it like a never executed code path:

arch/x86/kernel/acpi/boot.c:618:13: error: variable 'polarity' is uninitialized when used here [-Werror,-Wuninitialized]
        polarity = polarity ? ACPI_ACTIVE_LOW : ACPI_ACTIVE_HIGH;
                   ^~~~~~~~
arch/x86/kernel/acpi/boot.c:606:32: note: initialize the variable 'polarity' to silence this warning
        int rc, irq, trigger, polarity;
                                      ^
                                       = 0
arch/x86/kernel/acpi/boot.c:617:12: error: variable 'trigger' is uninitialized when used here [-Werror,-Wuninitialized]
        trigger = trigger ? ACPI_LEVEL_SENSITIVE : ACPI_EDGE_SENSITIVE;
                  ^~~~~~~
arch/x86/kernel/acpi/boot.c:606:22: note: initialize the variable 'trigger' to silence this warning
        int rc, irq, trigger, polarity;
                            ^
                             = 0

This is unfortunately a design decision in clang and won't be fixed.

Changing the acpi_get_override_irq() macro to an inline function
reliably avoids the issue.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Reviewed-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: NNathan Chancellor <natechancellor@gmail.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit a6a6d3b1f867d34ba5bd61aa7bb056b48ca67cff ]

clang finds a contruct suspicious that converts an unsigned
character to a signed integer and back, causing an overflow:

arch/x86/kvm/mmu.c:4605:39: error: implicit conversion from 'int' to 'u8' (aka 'unsigned char') changes value from -205 to 51 [-Werror,-Wconstant-conversion]
                u8 wf = (pfec & PFERR_WRITE_MASK) ? ~w : 0;
                   ~~                               ^~
arch/x86/kvm/mmu.c:4607:38: error: implicit conversion from 'int' to 'u8' (aka 'unsigned char') changes value from -241 to 15 [-Werror,-Wconstant-conversion]
                u8 uf = (pfec & PFERR_USER_MASK) ? ~u : 0;
                   ~~                              ^~
arch/x86/kvm/mmu.c:4609:39: error: implicit conversion from 'int' to 'u8' (aka 'unsigned char') changes value from -171 to 85 [-Werror,-Wconstant-conversion]
                u8 ff = (pfec & PFERR_FETCH_MASK) ? ~x : 0;
                   ~~                               ^~

Add an explicit cast to tell clang that everything works as
intended here.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Link: https://github.com/ClangBuiltLinux/linux/issues/95Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 916c31fff946fae0e05862f9b2435fdb29fd5090 ]

'perf version' on powerpc segfaults when used with non-supported
option:
  # perf version -a
  Segmentation fault (core dumped)

Fix this.
Signed-off-by: NRavi Bangoria <ravi.bangoria@linux.ibm.com>
Reviewed-by: NKamalesh Babulal <kamalesh@linux.vnet.ibm.com>
Tested-by: NMamatha Inamdar <mamatha4@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/20190611030109.20228-1-ravi.bangoria@linux.ibm.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 484647088826f2f651acbda6bcf9536b8a466703 ]

GCC v9 emits this warning:
      CC      drivers/s390/scsi/zfcp_erp.o
    drivers/s390/scsi/zfcp_erp.c: In function 'zfcp_erp_action_enqueue':
    drivers/s390/scsi/zfcp_erp.c:217:26: warning: 'erp_action' may be used uninitialized in this function [-Wmaybe-uninitialized]
      217 |  struct zfcp_erp_action *erp_action;
          |                          ^~~~~~~~~~

This is a possible false positive case, as also documented in the GCC
documentations:
    https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wmaybe-uninitialized

The actual code-sequence is like this:
    Various callers can invoke the function below with the argument "want"
    being one of:
    ZFCP_ERP_ACTION_REOPEN_ADAPTER,
    ZFCP_ERP_ACTION_REOPEN_PORT_FORCED,
    ZFCP_ERP_ACTION_REOPEN_PORT, or
    ZFCP_ERP_ACTION_REOPEN_LUN.

    zfcp_erp_action_enqueue(want, ...)
        ...
        need = zfcp_erp_required_act(want, ...)
            need = want
            ...
            maybe: need = ZFCP_ERP_ACTION_REOPEN_PORT
            maybe: need = ZFCP_ERP_ACTION_REOPEN_ADAPTER
            ...
            return need
        ...
        zfcp_erp_setup_act(need, ...)
            struct zfcp_erp_action *erp_action; // <== line 217
            ...
            switch(need) {
            case ZFCP_ERP_ACTION_REOPEN_LUN:
                    ...
                    erp_action = &zfcp_sdev->erp_action;
                    WARN_ON_ONCE(erp_action->port != port); // <== access
                    ...
                    break;
            case ZFCP_ERP_ACTION_REOPEN_PORT:
            case ZFCP_ERP_ACTION_REOPEN_PORT_FORCED:
                    ...
                    erp_action = &port->erp_action;
                    WARN_ON_ONCE(erp_action->port != port); // <== access
                    ...
                    break;
            case ZFCP_ERP_ACTION_REOPEN_ADAPTER:
                    ...
                    erp_action = &adapter->erp_action;
                    WARN_ON_ONCE(erp_action->port != NULL); // <== access
                    ...
                    break;
            }
            ...
            WARN_ON_ONCE(erp_action->adapter != adapter); // <== access

When zfcp_erp_setup_act() is called, 'need' will never be anything else
than one of the 4 possible enumeration-names that are used in the
switch-case, and 'erp_action' is initialized for every one of them, before
it is used. Thus the warning is a false positive, as documented.

We introduce the extra if{} in the beginning to create an extra code-flow,
so the compiler can be convinced that the switch-case will never see any
other value.

BUG_ON()/BUG() is intentionally not used to not crash anything, should
this ever happen anyway - right now it's impossible, as argued above; and
it doesn't introduce a 'default:' switch-case to retain warnings should
'enum zfcp_erp_act_type' ever be extended and no explicit case be
introduced. See also v5.0 commit 399b6c8bc9f7 ("scsi: zfcp: drop old
default switch case which might paper over missing case").
Signed-off-by: NBenjamin Block <bblock@linux.ibm.com>
Reviewed-by: NJens Remus <jremus@linux.ibm.com>
Reviewed-by: NSteffen Maier <maier@linux.ibm.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit b80d6a42bdc97bdb6139107d6034222e9843c6e2 ]

When CONFIG_DMI is disabled, we only have a tentative declaration,
which causes a warning from clang:

drivers/acpi/blacklist.c:20:35: error: tentative array definition assumed to have one element [-Werror]
static const struct dmi_system_id acpi_rev_dmi_table[] __initconst;

As the variable is not actually used here, hide it entirely
in an #ifdef to shut up the warning.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Reviewed-by: NNathan Chancellor <natechancellor@gmail.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 3b421018f48c482bdc9650f894aa1747cf90e51d ]

The getxattr manpage states that we should return ERANGE if the
destination buffer size is too small to hold the value.
ceph_vxattrcb_layout does this internally, but we should be doing
this for all vxattrs.

Fix the only caller of getxattr_cb to check the returned size
against the buffer length and return -ERANGE if it doesn't fit.
Drop the same check in ceph_vxattrcb_layout and just rely on the
caller to handle it.
Signed-off-by: NJeff Layton <jlayton@kernel.org>
Reviewed-by: N"Yan, Zheng" <zyan@redhat.com>
Acked-by: NIlya Dryomov <idryomov@gmail.com>
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 749607731e26dfb2558118038c40e9c0c80d23b5 ]

This barrier only applies to the read-modify-write operations; in
particular, it does not apply to the atomic64_set() primitive.

Replace the barrier with an smp_mb().

Fixes: fdd4e158 ("ceph: rework dcache readdir")
Reported-by: N"Paul E. McKenney" <paulmck@linux.ibm.com>
Reported-by: NPeter Zijlstra <peterz@infradead.org>
Signed-off-by: NAndrea Parri <andrea.parri@amarulasolutions.com>
Reviewed-by: N"Yan, Zheng" <zyan@redhat.com>
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit f2caf901c1b7ce65f9e6aef4217e3241039db768 ]

There is a race condition with how we send (or supress and don't send)
smb echos that will cause the client to incorrectly think the
server is unresponsive and thus needs to be reconnected.

Summary of the race condition:
 1) Daisy chaining scheduling creates a gap.
 2) If traffic comes unfortunate shortly after
    the last echo, the planned echo is suppressed.
 3) Due to the gap, the next echo transmission is delayed
    until after the timeout, which is set hard to twice
    the echo interval.

This is fixed by changing the timeouts from 2 to three times the echo interval.

Detailed description of the bug: https://lutz.donnerhacke.de/eng/Blog/Groundhog-Day-with-SMB-remountSigned-off-by: NRonnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: NPavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: NSteve French <stfrench@microsoft.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit e88439debd0a7f969b3ddba6f147152cd0732676 ]

[BUG]
Lockdep will report the following circular locking dependency:

  WARNING: possible circular locking dependency detected
  5.2.0-rc2-custom #24 Tainted: G           O
  ------------------------------------------------------
  btrfs/8631 is trying to acquire lock:
  000000002536438c (&fs_info->qgroup_ioctl_lock#2){+.+.}, at: btrfs_qgroup_inherit+0x40/0x620 [btrfs]

  but task is already holding lock:
  000000003d52cc23 (&fs_info->tree_log_mutex){+.+.}, at: create_pending_snapshot+0x8b6/0xe60 [btrfs]

  which lock already depends on the new lock.

  the existing dependency chain (in reverse order) is:

  -> #2 (&fs_info->tree_log_mutex){+.+.}:
         __mutex_lock+0x76/0x940
         mutex_lock_nested+0x1b/0x20
         btrfs_commit_transaction+0x475/0xa00 [btrfs]
         btrfs_commit_super+0x71/0x80 [btrfs]
         close_ctree+0x2bd/0x320 [btrfs]
         btrfs_put_super+0x15/0x20 [btrfs]
         generic_shutdown_super+0x72/0x110
         kill_anon_super+0x18/0x30
         btrfs_kill_super+0x16/0xa0 [btrfs]
         deactivate_locked_super+0x3a/0x80
         deactivate_super+0x51/0x60
         cleanup_mnt+0x3f/0x80
         __cleanup_mnt+0x12/0x20
         task_work_run+0x94/0xb0
         exit_to_usermode_loop+0xd8/0xe0
         do_syscall_64+0x210/0x240
         entry_SYSCALL_64_after_hwframe+0x49/0xbe

  -> #1 (&fs_info->reloc_mutex){+.+.}:
         __mutex_lock+0x76/0x940
         mutex_lock_nested+0x1b/0x20
         btrfs_commit_transaction+0x40d/0xa00 [btrfs]
         btrfs_quota_enable+0x2da/0x730 [btrfs]
         btrfs_ioctl+0x2691/0x2b40 [btrfs]
         do_vfs_ioctl+0xa9/0x6d0
         ksys_ioctl+0x67/0x90
         __x64_sys_ioctl+0x1a/0x20
         do_syscall_64+0x65/0x240
         entry_SYSCALL_64_after_hwframe+0x49/0xbe

  -> #0 (&fs_info->qgroup_ioctl_lock#2){+.+.}:
         lock_acquire+0xa7/0x190
         __mutex_lock+0x76/0x940
         mutex_lock_nested+0x1b/0x20
         btrfs_qgroup_inherit+0x40/0x620 [btrfs]
         create_pending_snapshot+0x9d7/0xe60 [btrfs]
         create_pending_snapshots+0x94/0xb0 [btrfs]
         btrfs_commit_transaction+0x415/0xa00 [btrfs]
         btrfs_mksubvol+0x496/0x4e0 [btrfs]
         btrfs_ioctl_snap_create_transid+0x174/0x180 [btrfs]
         btrfs_ioctl_snap_create_v2+0x11c/0x180 [btrfs]
         btrfs_ioctl+0xa90/0x2b40 [btrfs]
         do_vfs_ioctl+0xa9/0x6d0
         ksys_ioctl+0x67/0x90
         __x64_sys_ioctl+0x1a/0x20
         do_syscall_64+0x65/0x240
         entry_SYSCALL_64_after_hwframe+0x49/0xbe

  other info that might help us debug this:

  Chain exists of:
    &fs_info->qgroup_ioctl_lock#2 --> &fs_info->reloc_mutex --> &fs_info->tree_log_mutex

   Possible unsafe locking scenario:

         CPU0                    CPU1
         ----                    ----
    lock(&fs_info->tree_log_mutex);
                                 lock(&fs_info->reloc_mutex);
                                 lock(&fs_info->tree_log_mutex);
    lock(&fs_info->qgroup_ioctl_lock#2);

   *** DEADLOCK ***

  6 locks held by btrfs/8631:
   #0: 00000000ed8f23f6 (sb_writers#12){.+.+}, at: mnt_want_write_file+0x28/0x60
   #1: 000000009fb1597a (&type->i_mutex_dir_key#10/1){+.+.}, at: btrfs_mksubvol+0x70/0x4e0 [btrfs]
   #2: 0000000088c5ad88 (&fs_info->subvol_sem){++++}, at: btrfs_mksubvol+0x128/0x4e0 [btrfs]
   #3: 000000009606fc3e (sb_internal#2){.+.+}, at: start_transaction+0x37a/0x520 [btrfs]
   #4: 00000000f82bbdf5 (&fs_info->reloc_mutex){+.+.}, at: btrfs_commit_transaction+0x40d/0xa00 [btrfs]
   #5: 000000003d52cc23 (&fs_info->tree_log_mutex){+.+.}, at: create_pending_snapshot+0x8b6/0xe60 [btrfs]

[CAUSE]
Due to the delayed subvolume creation, we need to call
btrfs_qgroup_inherit() inside commit transaction code, with a lot of
other mutex hold.
This hell of lock chain can lead to above problem.

[FIX]
On the other hand, we don't really need to hold qgroup_ioctl_lock if
we're in the context of create_pending_snapshot().
As in that context, we're the only one being able to modify qgroup.

All other qgroup functions which needs qgroup_ioctl_lock are either
holding a transaction handle, or will start a new transaction:
  Functions will start a new transaction():
  * btrfs_quota_enable()
  * btrfs_quota_disable()
  Functions hold a transaction handler:
  * btrfs_add_qgroup_relation()
  * btrfs_del_qgroup_relation()
  * btrfs_create_qgroup()
  * btrfs_remove_qgroup()
  * btrfs_limit_qgroup()
  * btrfs_qgroup_inherit() call inside create_subvol()

So we have a higher level protection provided by transaction, thus we
don't need to always hold qgroup_ioctl_lock in btrfs_qgroup_inherit().

Only the btrfs_qgroup_inherit() call in create_subvol() needs to hold
qgroup_ioctl_lock, while the btrfs_qgroup_inherit() call in
create_pending_snapshot() is already protected by transaction.

So the fix is to detect the context by checking
trans->transaction->state.
If we're at TRANS_STATE_COMMIT_DOING, then we're in commit transaction
context and no need to get the mutex.
Reported-by: NNikolay Borisov <nborisov@suse.com>
Signed-off-by: NQu Wenruo <wqu@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 0ee5f8ae082e1f675a2fb6db601c31ac9958a134 ]

The list of profiles in btrfs_chunk_max_errors lists DUP as a profile
DUP able to tolerate 1 device missing. Though this profile is special
with 2 copies, it still needs the device, unlike the others.

Looking at the history of changes, thre's no clear reason why DUP is
there, functions were refactored and blocks of code merged to one
helper.

d20983b4 Btrfs: fix writing data into the seed filesystem
  - factor code to a helper

de11cc12 Btrfs: don't pre-allocate btrfs bio
  - unrelated change, DUP still in the list with max errors 1

a236aed1 Btrfs: Deal with failed writes in mirrored configurations
  - introduced the max errors, leaves DUP and RAID1 in the same group
Reviewed-by: NQu Wenruo <wqu@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit c974c48deeb969c5e4250e4f06af91edd84b1f10 ]

sprd_clk_regmap_init() doesn't always return success, adding check
for its return value should make the code more strong.
Signed-off-by: NChunyan Zhang <zhang.chunyan@linaro.org>
Reviewed-by: NBaolin Wang <baolin.wang@linaro.org>
[sboyd@kernel.org: Add a missing int ret]
Signed-off-by: NStephen Boyd <sboyd@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 5808b14a1f52554de612fee85ef517199855e310 ]

Fix a use-after-free bug during filesystem initialisation, where we
access the disc record (which is stored in a buffer) after we have
released the buffer.
Signed-off-by: NRussell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 0d34dfbf3023cf119b83f6470692c0b10c832495 ]

Full-speed and low-speed USB devices do not work with Tegra210
platforms because of incorrect PLLU/PLLU_OUT1 clock settings.

When full-speed device is connected:
[   14.059886] usb 1-3: new full-speed USB device number 2 using tegra-xusb
[   14.196295] usb 1-3: device descriptor read/64, error -71
[   14.436311] usb 1-3: device descriptor read/64, error -71
[   14.675749] usb 1-3: new full-speed USB device number 3 using tegra-xusb
[   14.812335] usb 1-3: device descriptor read/64, error -71
[   15.052316] usb 1-3: device descriptor read/64, error -71
[   15.164799] usb usb1-port3: attempt power cycle

When low-speed device is connected:
[   37.610949] usb usb1-port3: Cannot enable. Maybe the USB cable is bad?
[   38.557376] usb usb1-port3: Cannot enable. Maybe the USB cable is bad?
[   38.564977] usb usb1-port3: attempt power cycle

This commit fixes the issue by:
 1. initializing PLLU_OUT1 before initializing XUSB_FS_SRC clock
    because PLLU_OUT1 is parent of XUSB_FS_SRC.
 2. changing PLLU post-divider to /2 (DIVP=1) according to Technical
    Reference Manual.

Fixes: e745f992 ("clk: tegra: Rework pll_u")
Signed-off-by: NJC Kuo <jckuo@nvidia.com>
Acked-By: NPeter De Schrijver <pdeschrijver@nvidia.com>
Signed-off-by: NStephen Boyd <sboyd@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 78efb76ab4dfb8f74f290ae743f34162cd627f19 ]

While the .device_prep_slave_sg() callback rejects empty scatterlists,
it still accepts single-entry scatterlists with a zero-length segment.
These may happen if a driver calls dmaengine_prep_slave_single() with a
zero len parameter.  The corresponding DMA request will never complete,
leading to messages like:

    rcar-dmac e7300000.dma-controller: Channel Address Error happen

and DMA timeouts.

Although requesting a zero-length DMA request is a driver bug, rejecting
it early eases debugging.  Note that the .device_prep_dma_memcpy()
callback already rejects requests to copy zero bytes.
Reported-by: NEugeniu Rosca <erosca@de.adit-jv.com>
Analyzed-by: NYoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: NVinod Koul <vkoul@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit ba1bc0fcdeaf3bf583c1517bd2e3e29cf223c969 ]

The modification of EXIN register doesn't clean the bitfield before
the writing of a new value. After a few modifications the bitfield would
accumulate only '1's.
Signed-off-by: NPetr Cvek <petrcvekcz@gmail.com>
Signed-off-by: NPaul Burton <paul.burton@mips.com>
Cc: hauke@hauke-m.de
Cc: john@phrozen.org
Cc: linux-mips@vger.kernel.org
Cc: openwrt-devel@lists.openwrt.org
Cc: pakahmar@hotmail.com
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 92e074acf6f7694e96204265eb18ac113f546e80 ]

Since commit 85f1abe0 ("kthread, sched/wait: Fix kthread_parkme()
completion issue"), kthreads that are bound to a CPU must be parked
before being stopped. At the moment the PSCI checker calls
kthread_stop() directly on the suspend kthread, which triggers the
following warning:

[    6.068288] WARNING: CPU: 1 PID: 1 at kernel/kthread.c:398 __kthread_bind_mask+0x20/0x78
               ...
[    6.190151] Call trace:
[    6.192566]  __kthread_bind_mask+0x20/0x78
[    6.196615]  kthread_unpark+0x74/0x80
[    6.200235]  kthread_stop+0x44/0x1d8
[    6.203769]  psci_checker+0x3bc/0x484
[    6.207389]  do_one_initcall+0x48/0x260
[    6.211180]  kernel_init_freeable+0x2c8/0x368
[    6.215488]  kernel_init+0x10/0x100
[    6.218935]  ret_from_fork+0x10/0x1c
[    6.222467] ---[ end trace e05e22863d043cd3 ]---

kthread_unpark() tries to bind the thread to its CPU and aborts with a
WARN() if the thread wasn't in TASK_PARKED state. Park the kthreads
before stopping them.

Fixes: 85f1abe0 ("kthread, sched/wait: Fix kthread_parkme() completion issue")
Signed-off-by: NJean-Philippe Brucker <jean-philippe.brucker@arm.com>
Reviewed-by: NSudeep Holla <sudeep.holla@arm.com>
Acked-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: NOlof Johansson <olof@lixom.net>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 6e6de3dee51a439f76eb73c22ae2ffd2c9384712 ]

Microsoft HyperV disables the X86_FEATURE_SMCA bit on AMD systems, and
linux guests boot with repeated errors:

amd64_edac_mod: Unknown symbol amd_unregister_ecc_decoder (err -2)
amd64_edac_mod: Unknown symbol amd_register_ecc_decoder (err -2)
amd64_edac_mod: Unknown symbol amd_report_gart_errors (err -2)
amd64_edac_mod: Unknown symbol amd_unregister_ecc_decoder (err -2)
amd64_edac_mod: Unknown symbol amd_register_ecc_decoder (err -2)
amd64_edac_mod: Unknown symbol amd_report_gart_errors (err -2)

The warnings occur because the module code erroneously returns -EEXIST
for modules that have failed to load and are in the process of being
removed from the module list.

module amd64_edac_mod has a dependency on module edac_mce_amd.  Using
modules.dep, systemd will load edac_mce_amd for every request of
amd64_edac_mod.  When the edac_mce_amd module loads, the module has
state MODULE_STATE_UNFORMED and once the module load fails and the state
becomes MODULE_STATE_GOING.  Another request for edac_mce_amd module
executes and add_unformed_module() will erroneously return -EEXIST even
though the previous instance of edac_mce_amd has MODULE_STATE_GOING.
Upon receiving -EEXIST, systemd attempts to load amd64_edac_mod, which
fails because of unknown symbols from edac_mce_amd.

add_unformed_module() must wait to return for any case other than
MODULE_STATE_LIVE to prevent a race between multiple loads of
dependent modules.
Signed-off-by: NPrarit Bhargava <prarit@redhat.com>
Signed-off-by: NBarret Rhoden <brho@google.com>
Cc: David Arcari <darcari@redhat.com>
Cc: Jessica Yu <jeyu@kernel.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NJessica Yu <jeyu@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit c432a29d3fc9ee928caeca2f5cf68b3aebfa6817 ]

isp iommu requires wrapper variants of the clocks.
noc variants are always on and using the wrapper variants will activate
{A,H}CLK_ISP{0,1} due to the hierarchy.

Tested using the pending isp patch set (which is not upstream
yet). Without this patch, streaming from the isp stalls.

Also add the respective power domain and remove the "disabled" status.

Refer:
 RK3399 TRM v1.4 Fig. 2-4 RK3399 Clock Architecture Diagram
 RK3399 TRM v1.4 Fig. 8-1 RK3399 Power Domain Partition
Signed-off-by: NHelen Koike <helen.koike@collabora.com>
Tested-by: NManivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: NHeiko Stuebner <heiko@sntech.de>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit dc161064beb83c668e0f85766b92b1e7ed186e58 ]

Apparently driver was never tested with DMA_PREP_INTERRUPT flag being
unset since it completely disables interrupt handling instead of skipping
the callbacks invocations, hence putting channel into unusable state.

The flag is always set by all of kernel drivers that use APB DMA, so let's
error out in otherwise case for consistency. It won't be difficult to
support that case properly if ever will be needed.
Signed-off-by: NDmitry Osipenko <digetx@gmail.com>
Acked-by: NJon Hunter <jonathanh@nvidia.com>
Signed-off-by: NVinod Koul <vkoul@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit a124692b698b00026a58d89831ceda2331b2e1d0 ]

Custom trampolines can only be enabled if there is only a single ops
attached to it. If there's only a single callback registered to a function,
and the ops has a trampoline registered for it, then we can call the
trampoline directly. This is very useful for improving the performance of
ftrace and livepatch.

If more than one callback is registered to a function, the general
trampoline is used, and the custom trampoline is not restored back to the
direct call even if all the other callbacks were unregistered and we are
back to one callback for the function.

To fix this, set FTRACE_FL_TRAMP flag if rec count is decremented
to one, and the ops that left has a trampoline.

Testing After this patch :

insmod livepatch_unshare_files.ko
cat /sys/kernel/debug/tracing/enabled_functions

	unshare_files (1) R I	tramp: 0xffffffffc0000000(klp_ftrace_handler+0x0/0xa0) ->ftrace_ops_assist_func+0x0/0xf0

echo unshare_files > /sys/kernel/debug/tracing/set_ftrace_filter
echo function > /sys/kernel/debug/tracing/current_tracer
cat /sys/kernel/debug/tracing/enabled_functions

	unshare_files (2) R I ->ftrace_ops_list_func+0x0/0x150

echo nop > /sys/kernel/debug/tracing/current_tracer
cat /sys/kernel/debug/tracing/enabled_functions

	unshare_files (1) R I	tramp: 0xffffffffc0000000(klp_ftrace_handler+0x0/0xa0) ->ftrace_ops_assist_func+0x0/0xf0

Link: http://lkml.kernel.org/r/1556969979-111047-1-git-send-email-cj.chengjian@huawei.comSigned-off-by: NCheng Jian <cj.chengjian@huawei.com>
Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>