提交 fb525668 编写于 作者: A Alexandre Belloni 提交者: Tomi Valkeinen

fb: backlight: HX8357: Add HX8369 support

Add support for the Himax HX8369 controller as it is quite similar to the
hx8357.
Signed-off-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
上级 ccf9901f
...@@ -71,6 +71,18 @@ ...@@ -71,6 +71,18 @@
#define HX8357_SET_POWER_NORMAL 0xd2 #define HX8357_SET_POWER_NORMAL 0xd2
#define HX8357_SET_PANEL_RELATED 0xe9 #define HX8357_SET_PANEL_RELATED 0xe9
#define HX8369_SET_DISPLAY_BRIGHTNESS 0x51
#define HX8369_WRITE_CABC_DISPLAY_VALUE 0x53
#define HX8369_WRITE_CABC_BRIGHT_CTRL 0x55
#define HX8369_WRITE_CABC_MIN_BRIGHTNESS 0x5e
#define HX8369_SET_POWER 0xb1
#define HX8369_SET_DISPLAY_MODE 0xb2
#define HX8369_SET_DISPLAY_WAVEFORM_CYC 0xb4
#define HX8369_SET_VCOM 0xb6
#define HX8369_SET_EXTENSION_COMMAND 0xb9
#define HX8369_SET_GIP 0xd5
#define HX8369_SET_GAMMA_CURVE_RELATED 0xe0
struct hx8357_data { struct hx8357_data {
unsigned im_pins[HX8357_NUM_IM_PINS]; unsigned im_pins[HX8357_NUM_IM_PINS];
unsigned reset; unsigned reset;
...@@ -144,6 +156,61 @@ static u8 hx8357_seq_display_mode[] = { ...@@ -144,6 +156,61 @@ static u8 hx8357_seq_display_mode[] = {
HX8357_SET_DISPLAY_MODE_RGB_INTERFACE, HX8357_SET_DISPLAY_MODE_RGB_INTERFACE,
}; };
static u8 hx8369_seq_write_CABC_min_brightness[] = {
HX8369_WRITE_CABC_MIN_BRIGHTNESS, 0x00,
};
static u8 hx8369_seq_write_CABC_control[] = {
HX8369_WRITE_CABC_DISPLAY_VALUE, 0x24,
};
static u8 hx8369_seq_set_display_brightness[] = {
HX8369_SET_DISPLAY_BRIGHTNESS, 0xFF,
};
static u8 hx8369_seq_write_CABC_control_setting[] = {
HX8369_WRITE_CABC_BRIGHT_CTRL, 0x02,
};
static u8 hx8369_seq_extension_command[] = {
HX8369_SET_EXTENSION_COMMAND, 0xff, 0x83, 0x69,
};
static u8 hx8369_seq_display_related[] = {
HX8369_SET_DISPLAY_MODE, 0x00, 0x2b, 0x03, 0x03, 0x70, 0x00,
0xff, 0x00, 0x00, 0x00, 0x00, 0x03, 0x03, 0x00, 0x01,
};
static u8 hx8369_seq_panel_waveform_cycle[] = {
HX8369_SET_DISPLAY_WAVEFORM_CYC, 0x0a, 0x1d, 0x80, 0x06, 0x02,
};
static u8 hx8369_seq_set_address_mode[] = {
HX8357_SET_ADDRESS_MODE, 0x00,
};
static u8 hx8369_seq_vcom[] = {
HX8369_SET_VCOM, 0x3e, 0x3e,
};
static u8 hx8369_seq_gip[] = {
HX8369_SET_GIP, 0x00, 0x01, 0x03, 0x25, 0x01, 0x02, 0x28, 0x70,
0x11, 0x13, 0x00, 0x00, 0x40, 0x26, 0x51, 0x37, 0x00, 0x00, 0x71,
0x35, 0x60, 0x24, 0x07, 0x0f, 0x04, 0x04,
};
static u8 hx8369_seq_power[] = {
HX8369_SET_POWER, 0x01, 0x00, 0x34, 0x03, 0x00, 0x11, 0x11, 0x32,
0x2f, 0x3f, 0x3f, 0x01, 0x3a, 0x01, 0xe6, 0xe6, 0xe6, 0xe6, 0xe6,
};
static u8 hx8369_seq_gamma_curve_related[] = {
HX8369_SET_GAMMA_CURVE_RELATED, 0x00, 0x0d, 0x19, 0x2f, 0x3b, 0x3d,
0x2e, 0x4a, 0x08, 0x0e, 0x0f, 0x14, 0x16, 0x14, 0x14, 0x14, 0x1e,
0x00, 0x0d, 0x19, 0x2f, 0x3b, 0x3d, 0x2e, 0x4a, 0x08, 0x0e, 0x0f,
0x14, 0x16, 0x14, 0x14, 0x14, 0x1e,
};
static int hx8357_spi_write_then_read(struct lcd_device *lcdev, static int hx8357_spi_write_then_read(struct lcd_device *lcdev,
u8 *txbuf, u16 txlen, u8 *txbuf, u16 txlen,
u8 *rxbuf, u16 rxlen) u8 *rxbuf, u16 rxlen)
...@@ -220,6 +287,10 @@ static int hx8357_enter_standby(struct lcd_device *lcdev) ...@@ -220,6 +287,10 @@ static int hx8357_enter_standby(struct lcd_device *lcdev)
if (ret < 0) if (ret < 0)
return ret; return ret;
/*
* The controller needs 120ms when entering in sleep mode before we can
* send the command to go off sleep mode
*/
msleep(120); msleep(120);
return 0; return 0;
...@@ -233,6 +304,10 @@ static int hx8357_exit_standby(struct lcd_device *lcdev) ...@@ -233,6 +304,10 @@ static int hx8357_exit_standby(struct lcd_device *lcdev)
if (ret < 0) if (ret < 0)
return ret; return ret;
/*
* The controller needs 120ms when exiting from sleep mode before we
* can send the command to enter in sleep mode
*/
msleep(120); msleep(120);
ret = hx8357_spi_write_byte(lcdev, HX8357_SET_DISPLAY_ON); ret = hx8357_spi_write_byte(lcdev, HX8357_SET_DISPLAY_ON);
...@@ -242,6 +317,21 @@ static int hx8357_exit_standby(struct lcd_device *lcdev) ...@@ -242,6 +317,21 @@ static int hx8357_exit_standby(struct lcd_device *lcdev)
return 0; return 0;
} }
static void hx8357_lcd_reset(struct lcd_device *lcdev)
{
struct hx8357_data *lcd = lcd_get_data(lcdev);
/* Reset the screen */
gpio_set_value(lcd->reset, 1);
usleep_range(10000, 12000);
gpio_set_value(lcd->reset, 0);
usleep_range(10000, 12000);
gpio_set_value(lcd->reset, 1);
/* The controller needs 120ms to recover from reset */
msleep(120);
}
static int hx8357_lcd_init(struct lcd_device *lcdev) static int hx8357_lcd_init(struct lcd_device *lcdev)
{ {
struct hx8357_data *lcd = lcd_get_data(lcdev); struct hx8357_data *lcd = lcd_get_data(lcdev);
...@@ -257,14 +347,6 @@ static int hx8357_lcd_init(struct lcd_device *lcdev) ...@@ -257,14 +347,6 @@ static int hx8357_lcd_init(struct lcd_device *lcdev)
gpio_set_value_cansleep(lcd->im_pins[2], 1); gpio_set_value_cansleep(lcd->im_pins[2], 1);
} }
/* Reset the screen */
gpio_set_value(lcd->reset, 1);
usleep_range(10000, 12000);
gpio_set_value(lcd->reset, 0);
usleep_range(10000, 12000);
gpio_set_value(lcd->reset, 1);
msleep(120);
ret = hx8357_spi_write_array(lcdev, hx8357_seq_power, ret = hx8357_spi_write_array(lcdev, hx8357_seq_power,
ARRAY_SIZE(hx8357_seq_power)); ARRAY_SIZE(hx8357_seq_power));
if (ret < 0) if (ret < 0)
...@@ -344,6 +426,9 @@ static int hx8357_lcd_init(struct lcd_device *lcdev) ...@@ -344,6 +426,9 @@ static int hx8357_lcd_init(struct lcd_device *lcdev)
if (ret < 0) if (ret < 0)
return ret; return ret;
/*
* The controller needs 120ms to fully recover from exiting sleep mode
*/
msleep(120); msleep(120);
ret = hx8357_spi_write_byte(lcdev, HX8357_SET_DISPLAY_ON); ret = hx8357_spi_write_byte(lcdev, HX8357_SET_DISPLAY_ON);
...@@ -359,6 +444,96 @@ static int hx8357_lcd_init(struct lcd_device *lcdev) ...@@ -359,6 +444,96 @@ static int hx8357_lcd_init(struct lcd_device *lcdev)
return 0; return 0;
} }
static int hx8369_lcd_init(struct lcd_device *lcdev)
{
int ret;
ret = hx8357_spi_write_array(lcdev, hx8369_seq_extension_command,
ARRAY_SIZE(hx8369_seq_extension_command));
if (ret < 0)
return ret;
usleep_range(10000, 12000);
ret = hx8357_spi_write_array(lcdev, hx8369_seq_display_related,
ARRAY_SIZE(hx8369_seq_display_related));
if (ret < 0)
return ret;
ret = hx8357_spi_write_array(lcdev, hx8369_seq_panel_waveform_cycle,
ARRAY_SIZE(hx8369_seq_panel_waveform_cycle));
if (ret < 0)
return ret;
ret = hx8357_spi_write_array(lcdev, hx8369_seq_set_address_mode,
ARRAY_SIZE(hx8369_seq_set_address_mode));
if (ret < 0)
return ret;
ret = hx8357_spi_write_array(lcdev, hx8369_seq_vcom,
ARRAY_SIZE(hx8369_seq_vcom));
if (ret < 0)
return ret;
ret = hx8357_spi_write_array(lcdev, hx8369_seq_gip,
ARRAY_SIZE(hx8369_seq_gip));
if (ret < 0)
return ret;
ret = hx8357_spi_write_array(lcdev, hx8369_seq_power,
ARRAY_SIZE(hx8369_seq_power));
if (ret < 0)
return ret;
ret = hx8357_spi_write_byte(lcdev, HX8357_EXIT_SLEEP_MODE);
if (ret < 0)
return ret;
/*
* The controller needs 120ms to fully recover from exiting sleep mode
*/
msleep(120);
ret = hx8357_spi_write_array(lcdev, hx8369_seq_gamma_curve_related,
ARRAY_SIZE(hx8369_seq_gamma_curve_related));
if (ret < 0)
return ret;
ret = hx8357_spi_write_byte(lcdev, HX8357_EXIT_SLEEP_MODE);
if (ret < 0)
return ret;
usleep_range(1000, 1200);
ret = hx8357_spi_write_array(lcdev, hx8369_seq_write_CABC_control,
ARRAY_SIZE(hx8369_seq_write_CABC_control));
if (ret < 0)
return ret;
usleep_range(10000, 12000);
ret = hx8357_spi_write_array(lcdev,
hx8369_seq_write_CABC_control_setting,
ARRAY_SIZE(hx8369_seq_write_CABC_control_setting));
if (ret < 0)
return ret;
ret = hx8357_spi_write_array(lcdev,
hx8369_seq_write_CABC_min_brightness,
ARRAY_SIZE(hx8369_seq_write_CABC_min_brightness));
if (ret < 0)
return ret;
usleep_range(10000, 12000);
ret = hx8357_spi_write_array(lcdev, hx8369_seq_set_display_brightness,
ARRAY_SIZE(hx8369_seq_set_display_brightness));
if (ret < 0)
return ret;
ret = hx8357_spi_write_byte(lcdev, HX8357_SET_DISPLAY_ON);
if (ret < 0)
return ret;
return 0;
}
#define POWER_IS_ON(pwr) ((pwr) <= FB_BLANK_NORMAL) #define POWER_IS_ON(pwr) ((pwr) <= FB_BLANK_NORMAL)
static int hx8357_set_power(struct lcd_device *lcdev, int power) static int hx8357_set_power(struct lcd_device *lcdev, int power)
...@@ -391,10 +566,24 @@ static struct lcd_ops hx8357_ops = { ...@@ -391,10 +566,24 @@ static struct lcd_ops hx8357_ops = {
.get_power = hx8357_get_power, .get_power = hx8357_get_power,
}; };
static const struct of_device_id hx8357_dt_ids[] = {
{
.compatible = "himax,hx8357",
.data = hx8357_lcd_init,
},
{
.compatible = "himax,hx8369",
.data = hx8369_lcd_init,
},
{},
};
MODULE_DEVICE_TABLE(of, hx8357_dt_ids);
static int hx8357_probe(struct spi_device *spi) static int hx8357_probe(struct spi_device *spi)
{ {
struct lcd_device *lcdev; struct lcd_device *lcdev;
struct hx8357_data *lcd; struct hx8357_data *lcd;
const struct of_device_id *match;
int i, ret; int i, ret;
lcd = devm_kzalloc(&spi->dev, sizeof(*lcd), GFP_KERNEL); lcd = devm_kzalloc(&spi->dev, sizeof(*lcd), GFP_KERNEL);
...@@ -411,6 +600,10 @@ static int hx8357_probe(struct spi_device *spi) ...@@ -411,6 +600,10 @@ static int hx8357_probe(struct spi_device *spi)
lcd->spi = spi; lcd->spi = spi;
match = of_match_device(hx8357_dt_ids, &spi->dev);
if (!match || !match->data)
return -EINVAL;
lcd->reset = of_get_named_gpio(spi->dev.of_node, "gpios-reset", 0); lcd->reset = of_get_named_gpio(spi->dev.of_node, "gpios-reset", 0);
if (!gpio_is_valid(lcd->reset)) { if (!gpio_is_valid(lcd->reset)) {
dev_err(&spi->dev, "Missing dt property: gpios-reset\n"); dev_err(&spi->dev, "Missing dt property: gpios-reset\n");
...@@ -462,7 +655,9 @@ static int hx8357_probe(struct spi_device *spi) ...@@ -462,7 +655,9 @@ static int hx8357_probe(struct spi_device *spi)
} }
spi_set_drvdata(spi, lcdev); spi_set_drvdata(spi, lcdev);
ret = hx8357_lcd_init(lcdev); hx8357_lcd_reset(lcdev);
ret = ((int (*)(struct lcd_device *))match->data)(lcdev);
if (ret) { if (ret) {
dev_err(&spi->dev, "Couldn't initialize panel\n"); dev_err(&spi->dev, "Couldn't initialize panel\n");
goto init_error; goto init_error;
...@@ -485,12 +680,6 @@ static int hx8357_remove(struct spi_device *spi) ...@@ -485,12 +680,6 @@ static int hx8357_remove(struct spi_device *spi)
return 0; return 0;
} }
static const struct of_device_id hx8357_dt_ids[] = {
{ .compatible = "himax,hx8357" },
{},
};
MODULE_DEVICE_TABLE(of, hx8357_dt_ids);
static struct spi_driver hx8357_driver = { static struct spi_driver hx8357_driver = {
.probe = hx8357_probe, .probe = hx8357_probe,
.remove = hx8357_remove, .remove = hx8357_remove,
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册