From fb52566873ca8c7006948b9d51c7f3fbcc0b1116 Mon Sep 17 00:00:00 2001 From: Alexandre Belloni Date: Thu, 1 Aug 2013 10:40:37 +0200 Subject: [PATCH] fb: backlight: HX8357: Add HX8369 support Add support for the Himax HX8369 controller as it is quite similar to the hx8357. Signed-off-by: Alexandre Belloni Signed-off-by: Maxime Ripard Acked-by: Jingoo Han Signed-off-by: Tomi Valkeinen --- drivers/video/backlight/hx8357.c | 219 ++++++++++++++++++++++++++++--- 1 file changed, 204 insertions(+), 15 deletions(-) diff --git a/drivers/video/backlight/hx8357.c b/drivers/video/backlight/hx8357.c index 47237fa73b0c..c7af8c45ab8a 100644 --- a/drivers/video/backlight/hx8357.c +++ b/drivers/video/backlight/hx8357.c @@ -71,6 +71,18 @@ #define HX8357_SET_POWER_NORMAL 0xd2 #define HX8357_SET_PANEL_RELATED 0xe9 +#define HX8369_SET_DISPLAY_BRIGHTNESS 0x51 +#define HX8369_WRITE_CABC_DISPLAY_VALUE 0x53 +#define HX8369_WRITE_CABC_BRIGHT_CTRL 0x55 +#define HX8369_WRITE_CABC_MIN_BRIGHTNESS 0x5e +#define HX8369_SET_POWER 0xb1 +#define HX8369_SET_DISPLAY_MODE 0xb2 +#define HX8369_SET_DISPLAY_WAVEFORM_CYC 0xb4 +#define HX8369_SET_VCOM 0xb6 +#define HX8369_SET_EXTENSION_COMMAND 0xb9 +#define HX8369_SET_GIP 0xd5 +#define HX8369_SET_GAMMA_CURVE_RELATED 0xe0 + struct hx8357_data { unsigned im_pins[HX8357_NUM_IM_PINS]; unsigned reset; @@ -144,6 +156,61 @@ static u8 hx8357_seq_display_mode[] = { HX8357_SET_DISPLAY_MODE_RGB_INTERFACE, }; +static u8 hx8369_seq_write_CABC_min_brightness[] = { + HX8369_WRITE_CABC_MIN_BRIGHTNESS, 0x00, +}; + +static u8 hx8369_seq_write_CABC_control[] = { + HX8369_WRITE_CABC_DISPLAY_VALUE, 0x24, +}; + +static u8 hx8369_seq_set_display_brightness[] = { + HX8369_SET_DISPLAY_BRIGHTNESS, 0xFF, +}; + +static u8 hx8369_seq_write_CABC_control_setting[] = { + HX8369_WRITE_CABC_BRIGHT_CTRL, 0x02, +}; + +static u8 hx8369_seq_extension_command[] = { + HX8369_SET_EXTENSION_COMMAND, 0xff, 0x83, 0x69, +}; + +static u8 hx8369_seq_display_related[] = { + HX8369_SET_DISPLAY_MODE, 0x00, 0x2b, 0x03, 0x03, 0x70, 0x00, + 0xff, 0x00, 0x00, 0x00, 0x00, 0x03, 0x03, 0x00, 0x01, +}; + +static u8 hx8369_seq_panel_waveform_cycle[] = { + HX8369_SET_DISPLAY_WAVEFORM_CYC, 0x0a, 0x1d, 0x80, 0x06, 0x02, +}; + +static u8 hx8369_seq_set_address_mode[] = { + HX8357_SET_ADDRESS_MODE, 0x00, +}; + +static u8 hx8369_seq_vcom[] = { + HX8369_SET_VCOM, 0x3e, 0x3e, +}; + +static u8 hx8369_seq_gip[] = { + HX8369_SET_GIP, 0x00, 0x01, 0x03, 0x25, 0x01, 0x02, 0x28, 0x70, + 0x11, 0x13, 0x00, 0x00, 0x40, 0x26, 0x51, 0x37, 0x00, 0x00, 0x71, + 0x35, 0x60, 0x24, 0x07, 0x0f, 0x04, 0x04, +}; + +static u8 hx8369_seq_power[] = { + HX8369_SET_POWER, 0x01, 0x00, 0x34, 0x03, 0x00, 0x11, 0x11, 0x32, + 0x2f, 0x3f, 0x3f, 0x01, 0x3a, 0x01, 0xe6, 0xe6, 0xe6, 0xe6, 0xe6, +}; + +static u8 hx8369_seq_gamma_curve_related[] = { + HX8369_SET_GAMMA_CURVE_RELATED, 0x00, 0x0d, 0x19, 0x2f, 0x3b, 0x3d, + 0x2e, 0x4a, 0x08, 0x0e, 0x0f, 0x14, 0x16, 0x14, 0x14, 0x14, 0x1e, + 0x00, 0x0d, 0x19, 0x2f, 0x3b, 0x3d, 0x2e, 0x4a, 0x08, 0x0e, 0x0f, + 0x14, 0x16, 0x14, 0x14, 0x14, 0x1e, +}; + static int hx8357_spi_write_then_read(struct lcd_device *lcdev, u8 *txbuf, u16 txlen, u8 *rxbuf, u16 rxlen) @@ -220,6 +287,10 @@ static int hx8357_enter_standby(struct lcd_device *lcdev) if (ret < 0) return ret; + /* + * The controller needs 120ms when entering in sleep mode before we can + * send the command to go off sleep mode + */ msleep(120); return 0; @@ -233,6 +304,10 @@ static int hx8357_exit_standby(struct lcd_device *lcdev) if (ret < 0) return ret; + /* + * The controller needs 120ms when exiting from sleep mode before we + * can send the command to enter in sleep mode + */ msleep(120); ret = hx8357_spi_write_byte(lcdev, HX8357_SET_DISPLAY_ON); @@ -242,6 +317,21 @@ static int hx8357_exit_standby(struct lcd_device *lcdev) return 0; } +static void hx8357_lcd_reset(struct lcd_device *lcdev) +{ + struct hx8357_data *lcd = lcd_get_data(lcdev); + + /* Reset the screen */ + gpio_set_value(lcd->reset, 1); + usleep_range(10000, 12000); + gpio_set_value(lcd->reset, 0); + usleep_range(10000, 12000); + gpio_set_value(lcd->reset, 1); + + /* The controller needs 120ms to recover from reset */ + msleep(120); +} + static int hx8357_lcd_init(struct lcd_device *lcdev) { struct hx8357_data *lcd = lcd_get_data(lcdev); @@ -257,14 +347,6 @@ static int hx8357_lcd_init(struct lcd_device *lcdev) gpio_set_value_cansleep(lcd->im_pins[2], 1); } - /* Reset the screen */ - gpio_set_value(lcd->reset, 1); - usleep_range(10000, 12000); - gpio_set_value(lcd->reset, 0); - usleep_range(10000, 12000); - gpio_set_value(lcd->reset, 1); - msleep(120); - ret = hx8357_spi_write_array(lcdev, hx8357_seq_power, ARRAY_SIZE(hx8357_seq_power)); if (ret < 0) @@ -344,6 +426,9 @@ static int hx8357_lcd_init(struct lcd_device *lcdev) if (ret < 0) return ret; + /* + * The controller needs 120ms to fully recover from exiting sleep mode + */ msleep(120); ret = hx8357_spi_write_byte(lcdev, HX8357_SET_DISPLAY_ON); @@ -359,6 +444,96 @@ static int hx8357_lcd_init(struct lcd_device *lcdev) return 0; } +static int hx8369_lcd_init(struct lcd_device *lcdev) +{ + int ret; + + ret = hx8357_spi_write_array(lcdev, hx8369_seq_extension_command, + ARRAY_SIZE(hx8369_seq_extension_command)); + if (ret < 0) + return ret; + usleep_range(10000, 12000); + + ret = hx8357_spi_write_array(lcdev, hx8369_seq_display_related, + ARRAY_SIZE(hx8369_seq_display_related)); + if (ret < 0) + return ret; + + ret = hx8357_spi_write_array(lcdev, hx8369_seq_panel_waveform_cycle, + ARRAY_SIZE(hx8369_seq_panel_waveform_cycle)); + if (ret < 0) + return ret; + + ret = hx8357_spi_write_array(lcdev, hx8369_seq_set_address_mode, + ARRAY_SIZE(hx8369_seq_set_address_mode)); + if (ret < 0) + return ret; + + ret = hx8357_spi_write_array(lcdev, hx8369_seq_vcom, + ARRAY_SIZE(hx8369_seq_vcom)); + if (ret < 0) + return ret; + + ret = hx8357_spi_write_array(lcdev, hx8369_seq_gip, + ARRAY_SIZE(hx8369_seq_gip)); + if (ret < 0) + return ret; + + ret = hx8357_spi_write_array(lcdev, hx8369_seq_power, + ARRAY_SIZE(hx8369_seq_power)); + if (ret < 0) + return ret; + + ret = hx8357_spi_write_byte(lcdev, HX8357_EXIT_SLEEP_MODE); + if (ret < 0) + return ret; + + /* + * The controller needs 120ms to fully recover from exiting sleep mode + */ + msleep(120); + + ret = hx8357_spi_write_array(lcdev, hx8369_seq_gamma_curve_related, + ARRAY_SIZE(hx8369_seq_gamma_curve_related)); + if (ret < 0) + return ret; + + ret = hx8357_spi_write_byte(lcdev, HX8357_EXIT_SLEEP_MODE); + if (ret < 0) + return ret; + usleep_range(1000, 1200); + + ret = hx8357_spi_write_array(lcdev, hx8369_seq_write_CABC_control, + ARRAY_SIZE(hx8369_seq_write_CABC_control)); + if (ret < 0) + return ret; + usleep_range(10000, 12000); + + ret = hx8357_spi_write_array(lcdev, + hx8369_seq_write_CABC_control_setting, + ARRAY_SIZE(hx8369_seq_write_CABC_control_setting)); + if (ret < 0) + return ret; + + ret = hx8357_spi_write_array(lcdev, + hx8369_seq_write_CABC_min_brightness, + ARRAY_SIZE(hx8369_seq_write_CABC_min_brightness)); + if (ret < 0) + return ret; + usleep_range(10000, 12000); + + ret = hx8357_spi_write_array(lcdev, hx8369_seq_set_display_brightness, + ARRAY_SIZE(hx8369_seq_set_display_brightness)); + if (ret < 0) + return ret; + + ret = hx8357_spi_write_byte(lcdev, HX8357_SET_DISPLAY_ON); + if (ret < 0) + return ret; + + return 0; +} + #define POWER_IS_ON(pwr) ((pwr) <= FB_BLANK_NORMAL) static int hx8357_set_power(struct lcd_device *lcdev, int power) @@ -391,10 +566,24 @@ static struct lcd_ops hx8357_ops = { .get_power = hx8357_get_power, }; +static const struct of_device_id hx8357_dt_ids[] = { + { + .compatible = "himax,hx8357", + .data = hx8357_lcd_init, + }, + { + .compatible = "himax,hx8369", + .data = hx8369_lcd_init, + }, + {}, +}; +MODULE_DEVICE_TABLE(of, hx8357_dt_ids); + static int hx8357_probe(struct spi_device *spi) { struct lcd_device *lcdev; struct hx8357_data *lcd; + const struct of_device_id *match; int i, ret; lcd = devm_kzalloc(&spi->dev, sizeof(*lcd), GFP_KERNEL); @@ -411,6 +600,10 @@ static int hx8357_probe(struct spi_device *spi) lcd->spi = spi; + match = of_match_device(hx8357_dt_ids, &spi->dev); + if (!match || !match->data) + return -EINVAL; + lcd->reset = of_get_named_gpio(spi->dev.of_node, "gpios-reset", 0); if (!gpio_is_valid(lcd->reset)) { dev_err(&spi->dev, "Missing dt property: gpios-reset\n"); @@ -462,7 +655,9 @@ static int hx8357_probe(struct spi_device *spi) } spi_set_drvdata(spi, lcdev); - ret = hx8357_lcd_init(lcdev); + hx8357_lcd_reset(lcdev); + + ret = ((int (*)(struct lcd_device *))match->data)(lcdev); if (ret) { dev_err(&spi->dev, "Couldn't initialize panel\n"); goto init_error; @@ -485,12 +680,6 @@ static int hx8357_remove(struct spi_device *spi) return 0; } -static const struct of_device_id hx8357_dt_ids[] = { - { .compatible = "himax,hx8357" }, - {}, -}; -MODULE_DEVICE_TABLE(of, hx8357_dt_ids); - static struct spi_driver hx8357_driver = { .probe = hx8357_probe, .remove = hx8357_remove, -- GitLab