[BNX2]: New Broadcom gigabit network driver.

A new driver bnx2 for Broadcom bcm5706 is available.

The patch also includes new 1000BASE-X advertisement bit definitions in
mii.h

Thanks to David Miller and Jeff Garzik for reviewing and their valuable
feedback.
Signed-off-by: NMichael Chan <mchan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

drivers/net/Kconfig

@@ -2031,6 +2031,15 @@ config TIGON3
 	  To compile this driver as a module, choose M here: the module
 	  will be called tg3.  This is recommended.
 
+config BNX2
+	tristate "Broadcom NetXtremeII support"
+	depends on PCI
+	help
+	  This driver supports Broadcom NetXtremeII gigabit Ethernet cards.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called bnx2.  This is recommended.
+
 config GIANFAR
 	tristate "Gianfar Ethernet"
 	depends on 85xx || 83xx

drivers/net/Makefile

@@ -51,6 +51,7 @@ obj-$(CONFIG_NS83820) += ns83820.o
 obj-$(CONFIG_STNIC) += stnic.o 8390.o
 obj-$(CONFIG_FEALNX) += fealnx.o
 obj-$(CONFIG_TIGON3) += tg3.o
+obj-$(CONFIG_BNX2) += bnx2.o
 obj-$(CONFIG_TC35815) += tc35815.o
 obj-$(CONFIG_SK98LIN) += sk98lin/
 obj-$(CONFIG_SKFP) += skfp/

include/linux/mii.h

@@ -65,9 +65,13 @@
 #define ADVERTISE_SLCT          0x001f  /* Selector bits               */
 #define ADVERTISE_CSMA          0x0001  /* Only selector supported     */
 #define ADVERTISE_10HALF        0x0020  /* Try for 10mbps half-duplex  */
+#define ADVERTISE_1000XFULL     0x0020  /* Try for 1000BASE-X full-duplex */
 #define ADVERTISE_10FULL        0x0040  /* Try for 10mbps full-duplex  */
+#define ADVERTISE_1000XHALF     0x0040  /* Try for 1000BASE-X half-duplex */
 #define ADVERTISE_100HALF       0x0080  /* Try for 100mbps half-duplex */
+#define ADVERTISE_1000XPAUSE    0x0080  /* Try for 1000BASE-X pause    */
 #define ADVERTISE_100FULL       0x0100  /* Try for 100mbps full-duplex */
+#define ADVERTISE_1000XPSE_ASYM 0x0100  /* Try for 1000BASE-X asym pause */
 #define ADVERTISE_100BASE4      0x0200  /* Try for 100mbps 4k packets  */
 #define ADVERTISE_PAUSE_CAP     0x0400  /* Try for pause               */
 #define ADVERTISE_PAUSE_ASYM    0x0800  /* Try for asymetric pause     */
@@ -84,9 +88,13 @@
 /* Link partner ability register. */
 #define LPA_SLCT                0x001f  /* Same as advertise selector  */
 #define LPA_10HALF              0x0020  /* Can do 10mbps half-duplex   */
+#define LPA_1000XFULL           0x0020  /* Can do 1000BASE-X full-duplex */
 #define LPA_10FULL              0x0040  /* Can do 10mbps full-duplex   */
+#define LPA_1000XHALF           0x0040  /* Can do 1000BASE-X half-duplex */
 #define LPA_100HALF             0x0080  /* Can do 100mbps half-duplex  */
+#define LPA_1000XPAUSE          0x0080  /* Can do 1000BASE-X pause     */
 #define LPA_100FULL             0x0100  /* Can do 100mbps full-duplex  */
+#define LPA_1000XPAUSE_ASYM     0x0100  /* Can do 1000BASE-X pause asym*/
 #define LPA_100BASE4            0x0200  /* Can do 100mbps 4k packets   */
 #define LPA_PAUSE_CAP           0x0400  /* Can pause                   */
 #define LPA_PAUSE_ASYM          0x0800  /* Can pause asymetrically     */

include/linux/pci_ids.h

@@ -2071,6 +2071,7 @@
 #define PCI_DEVICE_ID_TIGON3_5703	0x1647
 #define PCI_DEVICE_ID_TIGON3_5704	0x1648
 #define PCI_DEVICE_ID_TIGON3_5704S_2	0x1649
+#define PCI_DEVICE_ID_NX2_5706		0x164a
 #define PCI_DEVICE_ID_TIGON3_5702FE	0x164d
 #define PCI_DEVICE_ID_TIGON3_5705	0x1653
 #define PCI_DEVICE_ID_TIGON3_5705_2	0x1654
@@ -2090,6 +2091,7 @@
 #define PCI_DEVICE_ID_TIGON3_5702X	0x16a6
 #define PCI_DEVICE_ID_TIGON3_5703X	0x16a7
 #define PCI_DEVICE_ID_TIGON3_5704S	0x16a8
+#define PCI_DEVICE_ID_NX2_5706S		0x16aa
 #define PCI_DEVICE_ID_TIGON3_5702A3	0x16c6
 #define PCI_DEVICE_ID_TIGON3_5703A3	0x16c7
 #define PCI_DEVICE_ID_TIGON3_5781	0x16dd