提交 b6016b76 编写于 作者: M Michael Chan 提交者: David S. Miller

[BNX2]: New Broadcom gigabit network driver.

A new driver bnx2 for Broadcom bcm5706 is available.

The patch also includes new 1000BASE-X advertisement bit definitions in
mii.h

Thanks to David Miller and Jeff Garzik for reviewing and their valuable
feedback.
Signed-off-by: NMichael Chan <mchan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
上级 c8b35d2a
......@@ -2031,6 +2031,15 @@ config TIGON3
To compile this driver as a module, choose M here: the module
will be called tg3. This is recommended.
config BNX2
tristate "Broadcom NetXtremeII support"
depends on PCI
help
This driver supports Broadcom NetXtremeII gigabit Ethernet cards.
To compile this driver as a module, choose M here: the module
will be called bnx2. This is recommended.
config GIANFAR
tristate "Gianfar Ethernet"
depends on 85xx || 83xx
......
......@@ -51,6 +51,7 @@ obj-$(CONFIG_NS83820) += ns83820.o
obj-$(CONFIG_STNIC) += stnic.o 8390.o
obj-$(CONFIG_FEALNX) += fealnx.o
obj-$(CONFIG_TIGON3) += tg3.o
obj-$(CONFIG_BNX2) += bnx2.o
obj-$(CONFIG_TC35815) += tc35815.o
obj-$(CONFIG_SK98LIN) += sk98lin/
obj-$(CONFIG_SKFP) += skfp/
......
此差异已折叠。
此差异已折叠。
此差异已折叠。
......@@ -65,9 +65,13 @@
#define ADVERTISE_SLCT 0x001f /* Selector bits */
#define ADVERTISE_CSMA 0x0001 /* Only selector supported */
#define ADVERTISE_10HALF 0x0020 /* Try for 10mbps half-duplex */
#define ADVERTISE_1000XFULL 0x0020 /* Try for 1000BASE-X full-duplex */
#define ADVERTISE_10FULL 0x0040 /* Try for 10mbps full-duplex */
#define ADVERTISE_1000XHALF 0x0040 /* Try for 1000BASE-X half-duplex */
#define ADVERTISE_100HALF 0x0080 /* Try for 100mbps half-duplex */
#define ADVERTISE_1000XPAUSE 0x0080 /* Try for 1000BASE-X pause */
#define ADVERTISE_100FULL 0x0100 /* Try for 100mbps full-duplex */
#define ADVERTISE_1000XPSE_ASYM 0x0100 /* Try for 1000BASE-X asym pause */
#define ADVERTISE_100BASE4 0x0200 /* Try for 100mbps 4k packets */
#define ADVERTISE_PAUSE_CAP 0x0400 /* Try for pause */
#define ADVERTISE_PAUSE_ASYM 0x0800 /* Try for asymetric pause */
......@@ -84,9 +88,13 @@
/* Link partner ability register. */
#define LPA_SLCT 0x001f /* Same as advertise selector */
#define LPA_10HALF 0x0020 /* Can do 10mbps half-duplex */
#define LPA_1000XFULL 0x0020 /* Can do 1000BASE-X full-duplex */
#define LPA_10FULL 0x0040 /* Can do 10mbps full-duplex */
#define LPA_1000XHALF 0x0040 /* Can do 1000BASE-X half-duplex */
#define LPA_100HALF 0x0080 /* Can do 100mbps half-duplex */
#define LPA_1000XPAUSE 0x0080 /* Can do 1000BASE-X pause */
#define LPA_100FULL 0x0100 /* Can do 100mbps full-duplex */
#define LPA_1000XPAUSE_ASYM 0x0100 /* Can do 1000BASE-X pause asym*/
#define LPA_100BASE4 0x0200 /* Can do 100mbps 4k packets */
#define LPA_PAUSE_CAP 0x0400 /* Can pause */
#define LPA_PAUSE_ASYM 0x0800 /* Can pause asymetrically */
......
......@@ -2071,6 +2071,7 @@
#define PCI_DEVICE_ID_TIGON3_5703 0x1647
#define PCI_DEVICE_ID_TIGON3_5704 0x1648
#define PCI_DEVICE_ID_TIGON3_5704S_2 0x1649
#define PCI_DEVICE_ID_NX2_5706 0x164a
#define PCI_DEVICE_ID_TIGON3_5702FE 0x164d
#define PCI_DEVICE_ID_TIGON3_5705 0x1653
#define PCI_DEVICE_ID_TIGON3_5705_2 0x1654
......@@ -2090,6 +2091,7 @@
#define PCI_DEVICE_ID_TIGON3_5702X 0x16a6
#define PCI_DEVICE_ID_TIGON3_5703X 0x16a7
#define PCI_DEVICE_ID_TIGON3_5704S 0x16a8
#define PCI_DEVICE_ID_NX2_5706S 0x16aa
#define PCI_DEVICE_ID_TIGON3_5702A3 0x16c6
#define PCI_DEVICE_ID_TIGON3_5703A3 0x16c7
#define PCI_DEVICE_ID_TIGON3_5781 0x16dd
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册