提交 95fcfa70 编写于 作者: K Kevin Hilman

Merge tag 'renesas-fixes-for-v3.13' of...

Merge tag 'renesas-fixes-for-v3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into fixes

From Simon Horman:
Renesas ARM based SoC fixes for v3.13

* r8a7790 (R-Car H1) SoC
  - Correct GPIO resources in DT.

    This problem has been present since GPIOs were added to the r8a7790 SoC
    by f98e10c8 ("ARM: shmobile: r8a7790: Add GPIO controller
    devices to device tree") in v3.12-rc1.

* irqchip renesas-intc-irqpin
  - Correct register bitfield shift calculation

    This bug has been present since the renesas-intc-irqpin driver was
    introduced by 44358048 ("irqchip: Renesas INTC External IRQ pin
    driver") in v3.10-rc1

* Lager board
  - Do not build the phy fixup unless CONFIG_PHYLIB is enabled

    This problem was introduced by 48c8b96f

* tag 'renesas-fixes-for-v3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  ARM: shmobile: r8a7790: Fix GPIO resources in DTS
  irqchip: renesas-intc-irqpin: Fix register bitfield shift calculation
  ARM: shmobile: lager: phy fixup needs CONFIG_PHYLIB
Signed-off-by: NKevin Hilman <khilman@linaro.org>
......@@ -87,9 +87,9 @@
interrupts = <1 9 0xf04>;
};
gpio0: gpio@ffc40000 {
gpio0: gpio@e6050000 {
compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar";
reg = <0 0xffc40000 0 0x2c>;
reg = <0 0xe6050000 0 0x50>;
interrupt-parent = <&gic>;
interrupts = <0 4 0x4>;
#gpio-cells = <2>;
......@@ -99,9 +99,9 @@
interrupt-controller;
};
gpio1: gpio@ffc41000 {
gpio1: gpio@e6051000 {
compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar";
reg = <0 0xffc41000 0 0x2c>;
reg = <0 0xe6051000 0 0x50>;
interrupt-parent = <&gic>;
interrupts = <0 5 0x4>;
#gpio-cells = <2>;
......@@ -111,9 +111,9 @@
interrupt-controller;
};
gpio2: gpio@ffc42000 {
gpio2: gpio@e6052000 {
compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar";
reg = <0 0xffc42000 0 0x2c>;
reg = <0 0xe6052000 0 0x50>;
interrupt-parent = <&gic>;
interrupts = <0 6 0x4>;
#gpio-cells = <2>;
......@@ -123,9 +123,9 @@
interrupt-controller;
};
gpio3: gpio@ffc43000 {
gpio3: gpio@e6053000 {
compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar";
reg = <0 0xffc43000 0 0x2c>;
reg = <0 0xe6053000 0 0x50>;
interrupt-parent = <&gic>;
interrupts = <0 7 0x4>;
#gpio-cells = <2>;
......@@ -135,9 +135,9 @@
interrupt-controller;
};
gpio4: gpio@ffc44000 {
gpio4: gpio@e6054000 {
compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar";
reg = <0 0xffc44000 0 0x2c>;
reg = <0 0xe6054000 0 0x50>;
interrupt-parent = <&gic>;
interrupts = <0 8 0x4>;
#gpio-cells = <2>;
......@@ -147,9 +147,9 @@
interrupt-controller;
};
gpio5: gpio@ffc45000 {
gpio5: gpio@e6055000 {
compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar";
reg = <0 0xffc45000 0 0x2c>;
reg = <0 0xe6055000 0 0x50>;
interrupt-parent = <&gic>;
interrupts = <0 9 0x4>;
#gpio-cells = <2>;
......
......@@ -245,7 +245,9 @@ static void __init lager_init(void)
{
lager_add_standard_devices();
phy_register_fixup_for_id("r8a7790-ether-ff:01", lager_ksz8041_fixup);
if (IS_ENABLED(CONFIG_PHYLIB))
phy_register_fixup_for_id("r8a7790-ether-ff:01",
lager_ksz8041_fixup);
}
static const char * const lager_boards_compat_dt[] __initconst = {
......
......@@ -149,8 +149,9 @@ static void intc_irqpin_read_modify_write(struct intc_irqpin_priv *p,
static void intc_irqpin_mask_unmask_prio(struct intc_irqpin_priv *p,
int irq, int do_mask)
{
int bitfield_width = 4; /* PRIO assumed to have fixed bitfield width */
int shift = (7 - irq) * bitfield_width; /* PRIO assumed to be 32-bit */
/* The PRIO register is assumed to be 32-bit with fixed 4-bit fields. */
int bitfield_width = 4;
int shift = 32 - (irq + 1) * bitfield_width;
intc_irqpin_read_modify_write(p, INTC_IRQPIN_REG_PRIO,
shift, bitfield_width,
......@@ -159,8 +160,9 @@ static void intc_irqpin_mask_unmask_prio(struct intc_irqpin_priv *p,
static int intc_irqpin_set_sense(struct intc_irqpin_priv *p, int irq, int value)
{
/* The SENSE register is assumed to be 32-bit. */
int bitfield_width = p->config.sense_bitfield_width;
int shift = (7 - irq) * bitfield_width; /* SENSE assumed to be 32-bit */
int shift = 32 - (irq + 1) * bitfield_width;
dev_dbg(&p->pdev->dev, "sense irq = %d, mode = %d\n", irq, value);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册