提交 7c2a6c62 编写于 作者: C Christoph Lameter 提交者: Tony Luck

[IA64] Altix pcibus_to_node implementation

The Altix subarch does not provide node information via ACPI. Instead hooks
are used to fixup pci structures. This patch determines the nodes for Altix
PCI busses.

Remote Bridges:
---------------
Altix supports remote I/O nodes without memory or processors but with bridges.
The TIOCA type of bridge is an AGP bridge and the PROM provides information
about the closest node. That information will be returned by pcibus_to_node.

The TIOCP remote bridge type is a PCI bridge but the PROM does not provide a
closest node id. pcibus_to_node will return -1 for devices on those bridges
meaning that device control structures may be allocated on any node.

Safeguard:
----------
Should the fixups result in invalid node information for a pci controller then
a warning will be printed and pcibus_to_node will return -1.


This patch also fixes the "FIXME" in sn_dma_alloc_coherent. This means that
dma_alloc_coherent will now use alloc_pages_node to allocate memory local to
the node that the PCI device is connected to.
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Signed-off-by: NTony Luck <tony.luck@intel.com>
上级 08357f82
......@@ -61,7 +61,7 @@ sn_default_pci_unmap(struct pci_dev *pdev, dma_addr_t addr, int direction)
}
static void *
sn_default_pci_bus_fixup(struct pcibus_bussoft *soft)
sn_default_pci_bus_fixup(struct pcibus_bussoft *soft, struct pci_controller *controller)
{
return NULL;
}
......@@ -362,7 +362,7 @@ void sn_pci_controller_fixup(int segment, int busnum, struct pci_bus *bus)
provider_soft = NULL;
if (provider->bus_fixup)
provider_soft = (*provider->bus_fixup) (prom_bussoft_ptr);
provider_soft = (*provider->bus_fixup) (prom_bussoft_ptr, controller);
if (provider_soft == NULL)
return; /* fixup failed or not applicable */
......@@ -380,6 +380,22 @@ void sn_pci_controller_fixup(int segment, int busnum, struct pci_bus *bus)
SN_PCIBUS_BUSSOFT(bus)->bs_xwidget_info =
&(hubdev_info->hdi_xwidget_info[SN_PCIBUS_BUSSOFT(bus)->bs_xid]);
/*
* If the node information we obtained during the fixup phase is invalid
* then set controller->node to -1 (undetermined)
*/
if (controller->node >= num_online_nodes()) {
struct pcibus_bussoft *b = SN_PCIBUS_BUSSOFT(bus);
printk(KERN_WARNING "Device ASIC=%u XID=%u PBUSNUM=%lu"
"L_IO=%lx L_MEM=%lx BASE=%lx\n",
b->bs_asic_type, b->bs_xid, b->bs_persist_busnum,
b->bs_legacy_io, b->bs_legacy_mem, b->bs_base);
printk(KERN_WARNING "on node %d but only %d nodes online."
"Association set to undetermined.\n",
controller->node, num_online_nodes());
controller->node = -1;
}
return;
error_return:
......
......@@ -79,6 +79,7 @@ void *sn_dma_alloc_coherent(struct device *dev, size_t size,
{
void *cpuaddr;
unsigned long phys_addr;
int node;
struct pci_dev *pdev = to_pci_dev(dev);
struct sn_pcibus_provider *provider = SN_PCIDEV_BUSPROVIDER(pdev);
......@@ -86,10 +87,19 @@ void *sn_dma_alloc_coherent(struct device *dev, size_t size,
/*
* Allocate the memory.
* FIXME: We should be doing alloc_pages_node for the node closest
* to the PCI device.
*/
if (!(cpuaddr = (void *)__get_free_pages(GFP_ATOMIC, get_order(size))))
node = pcibus_to_node(pdev->bus);
if (likely(node >=0)) {
struct page *p = alloc_pages_node(node, GFP_ATOMIC, get_order(size));
if (likely(p))
cpuaddr = page_address(p);
else
return NULL;
} else
cpuaddr = (void *)__get_free_pages(GFP_ATOMIC, get_order(size));
if (unlikely(!cpuaddr))
return NULL;
memset(cpuaddr, 0x0, size);
......
......@@ -85,7 +85,7 @@ pcibr_error_intr_handler(int irq, void *arg, struct pt_regs *regs)
}
void *
pcibr_bus_fixup(struct pcibus_bussoft *prom_bussoft)
pcibr_bus_fixup(struct pcibus_bussoft *prom_bussoft, struct pci_controller *controller)
{
int nasid, cnode, j;
struct hubdev_info *hubdev_info;
......@@ -158,6 +158,14 @@ pcibr_bus_fixup(struct pcibus_bussoft *prom_bussoft)
memset(soft->pbi_int_ate_resource.ate, 0,
(soft->pbi_int_ate_size * sizeof(uint64_t)));
if (prom_bussoft->bs_asic_type == PCIIO_ASIC_TYPE_TIOCP)
/*
* TIO PCI Bridge with no closest node information.
* FIXME: Find another way to determine the closest node
*/
controller->node = -1;
else
controller->node = cnode;
return soft;
}
......
......@@ -581,7 +581,7 @@ tioca_error_intr_handler(int irq, void *arg, struct pt_regs *pt)
* the caller.
*/
static void *
tioca_bus_fixup(struct pcibus_bussoft *prom_bussoft)
tioca_bus_fixup(struct pcibus_bussoft *prom_bussoft, struct pci_controller *controller)
{
struct tioca_common *tioca_common;
struct tioca_kernel *tioca_kern;
......@@ -646,6 +646,8 @@ tioca_bus_fixup(struct pcibus_bussoft *prom_bussoft)
__FUNCTION__, SGI_TIOCA_ERROR,
(int)tioca_common->ca_common.bs_persist_busnum);
/* Setup locality information */
controller->node = tioca_kern->ca_closest_node;
return tioca_common;
}
......
......@@ -128,7 +128,7 @@ pcibr_lock(struct pcibus_info *pcibus_info)
#define pcibr_unlock(pcibus_info, flag) spin_unlock_irqrestore(&pcibus_info->pbi_lock, flag)
extern int pcibr_init_provider(void);
extern void *pcibr_bus_fixup(struct pcibus_bussoft *);
extern void *pcibr_bus_fixup(struct pcibus_bussoft *, struct pci_controller *);
extern dma_addr_t pcibr_dma_map(struct pci_dev *, unsigned long, size_t);
extern dma_addr_t pcibr_dma_map_consistent(struct pci_dev *, unsigned long, size_t);
extern void pcibr_dma_unmap(struct pci_dev *, dma_addr_t, int);
......
......@@ -37,6 +37,7 @@ struct pcibus_bussoft {
struct xwidget_info *bs_xwidget_info;
};
struct pci_controller;
/*
* SN pci bus indirection
*/
......@@ -45,7 +46,7 @@ struct sn_pcibus_provider {
dma_addr_t (*dma_map)(struct pci_dev *, unsigned long, size_t);
dma_addr_t (*dma_map_consistent)(struct pci_dev *, unsigned long, size_t);
void (*dma_unmap)(struct pci_dev *, dma_addr_t, int);
void * (*bus_fixup)(struct pcibus_bussoft *);
void * (*bus_fixup)(struct pcibus_bussoft *, struct pci_controller *);
};
extern struct sn_pcibus_provider *sn_pci_provider[];
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册