提交 08357f82 编写于 作者: Z Zoltan Menyhart 提交者: Tony Luck

[IA64] improve flush_icache_range()

Check with PAL to see what the i-cache line size is for
each level of the cache, and so use the correct stride
when flushing the cache.

Acked-by: David Mosberger
Signed-off-by: NTony Luck <tony.luck@intel.com>
上级 60a762b6
......@@ -20,6 +20,7 @@
* 02/01/00 R.Seth fixed get_cpuinfo for SMP
* 01/07/99 S.Eranian added the support for command line argument
* 06/24/99 W.Drummond added boot_cpu_data.
* 05/28/05 Z. Menyhart Dynamic stride size for "flush_icache_range()"
*/
#include <linux/config.h>
#include <linux/module.h>
......@@ -82,6 +83,13 @@ struct io_space io_space[MAX_IO_SPACES];
EXPORT_SYMBOL(io_space);
unsigned int num_io_spaces;
/*
* "flush_icache_range()" needs to know what processor dependent stride size to use
* when it makes i-cache(s) coherent with d-caches.
*/
#define I_CACHE_STRIDE_SHIFT 5 /* Safest way to go: 32 bytes by 32 bytes */
unsigned long ia64_i_cache_stride_shift = ~0;
/*
* The merge_mask variable needs to be set to (max(iommu_page_size(iommu)) - 1). This
* mask specifies a mask of address bits that must be 0 in order for two buffers to be
......@@ -626,6 +634,12 @@ setup_per_cpu_areas (void)
/* start_kernel() requires this... */
}
/*
* Calculate the max. cache line size.
*
* In addition, the minimum of the i-cache stride sizes is calculated for
* "flush_icache_range()".
*/
static void
get_max_cacheline_size (void)
{
......@@ -639,6 +653,8 @@ get_max_cacheline_size (void)
printk(KERN_ERR "%s: ia64_pal_cache_summary() failed (status=%ld)\n",
__FUNCTION__, status);
max = SMP_CACHE_BYTES;
/* Safest setup for "flush_icache_range()" */
ia64_i_cache_stride_shift = I_CACHE_STRIDE_SHIFT;
goto out;
}
......@@ -647,14 +663,31 @@ get_max_cacheline_size (void)
&cci);
if (status != 0) {
printk(KERN_ERR
"%s: ia64_pal_cache_config_info(l=%lu) failed (status=%ld)\n",
"%s: ia64_pal_cache_config_info(l=%lu, 2) failed (status=%ld)\n",
__FUNCTION__, l, status);
max = SMP_CACHE_BYTES;
/* The safest setup for "flush_icache_range()" */
cci.pcci_stride = I_CACHE_STRIDE_SHIFT;
cci.pcci_unified = 1;
}
line_size = 1 << cci.pcci_line_size;
if (line_size > max)
max = line_size;
}
if (!cci.pcci_unified) {
status = ia64_pal_cache_config_info(l,
/* cache_type (instruction)= */ 1,
&cci);
if (status != 0) {
printk(KERN_ERR
"%s: ia64_pal_cache_config_info(l=%lu, 1) failed (status=%ld)\n",
__FUNCTION__, l, status);
/* The safest setup for "flush_icache_range()" */
cci.pcci_stride = I_CACHE_STRIDE_SHIFT;
}
}
if (cci.pcci_stride < ia64_i_cache_stride_shift)
ia64_i_cache_stride_shift = cci.pcci_stride;
}
out:
if (max > ia64_max_cacheline_size)
ia64_max_cacheline_size = max;
......
......@@ -3,37 +3,59 @@
*
* Copyright (C) 1999-2001, 2005 Hewlett-Packard Co
* David Mosberger-Tang <davidm@hpl.hp.com>
*
* 05/28/05 Zoltan Menyhart Dynamic stride size
*/
#include <asm/asmmacro.h>
#include <asm/page.h>
/*
* flush_icache_range(start,end)
* Must flush range from start to end-1 but nothing else (need to
*
* Make i-cache(s) coherent with d-caches.
*
* Must deal with range from start to end-1 but nothing else (need to
* be careful not to touch addresses that may be unmapped).
*
* Note: "in0" and "in1" are preserved for debugging purposes.
*/
GLOBAL_ENTRY(flush_icache_range)
.prologue
alloc r2=ar.pfs,2,0,0,0
sub r8=in1,in0,1
alloc r2=ar.pfs,2,0,0,0
movl r3=ia64_i_cache_stride_shift
mov r21=1
;;
ld8 r20=[r3] // r20: stride shift
sub r22=in1,r0,1 // last byte address
;;
shr.u r8=r8,5 // we flush 32 bytes per iteration
.save ar.lc, r3
mov r3=ar.lc // save ar.lc
shr.u r23=in0,r20 // start / (stride size)
shr.u r22=r22,r20 // (last byte address) / (stride size)
shl r21=r21,r20 // r21: stride size of the i-cache(s)
;;
sub r8=r22,r23 // number of strides - 1
shl r24=r23,r20 // r24: addresses for "fc.i" =
// "start" rounded down to stride boundary
.save ar.lc,r3
mov r3=ar.lc // save ar.lc
;;
.body
mov ar.lc=r8
mov ar.lc=r8
;;
.Loop: fc.i in0 // issuable on M2 only
add in0=32,in0
/*
* 32 byte aligned loop, even number of (actually 2) bundles
*/
.Loop: fc.i r24 // issuable on M0 only
add r24=r21,r24 // we flush "stride size" bytes per iteration
nop.i 0
br.cloop.sptk.few .Loop
;;
sync.i
;;
srlz.i
;;
mov ar.lc=r3 // restore ar.lc
mov ar.lc=r3 // restore ar.lc
br.ret.sptk.many rp
END(flush_icache_range)
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册