Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc

Pull powerpc updates from Ben Herrenschmidt:
 "Here's the powerpc batch for this merge window.  Some of the
  highlights are:

   - A bunch of endian fixes ! We don't have full LE support yet in that
     release but this contains a lot of fixes all over arch/powerpc to
     use the proper accessors, call the firmware with the right endian
     mode, etc...

   - A few updates to our "powernv" platform (non-virtualized, the one
     to run KVM on), among other, support for bridging the P8 LPC bus
     for UARTs, support and some EEH fixes.

   - Some mpc51xx clock API cleanups in preparation for a clock API
     overhaul

   - A pile of cleanups of our old math emulation code, including better
     support for using it to emulate optional FP instructions on
     embedded chips that otherwise have a HW FPU.

   - Some infrastructure in selftest, for powerpc now, but could be
     generalized, initially used by some tests for our perf instruction
     counting code.

   - A pile of fixes for hotplug on pseries (that was seriously
     bitrotting)

   - The usual slew of freescale embedded updates, new boards, 64-bit
     hiberation support, e6500 core PMU support, etc..."

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (146 commits)
  powerpc: Correct FSCR bit definitions
  powerpc/xmon: Fix printing of set of CPUs in xmon
  powerpc/pseries: Move lparcfg.c to platforms/pseries
  powerpc/powernv: Return secondary CPUs to firmware on kexec
  powerpc/btext: Fix CONFIG_PPC_EARLY_DEBUG_BOOTX on ppc32
  powerpc: Cleanup handling of the DSCR bit in the FSCR register
  powerpc/pseries: Child nodes are not detached by dlpar_detach_node
  powerpc/pseries: Add mising of_node_put in delete_dt_node
  powerpc/pseries: Make dlpar_configure_connector parent node aware
  powerpc/pseries: Do all node initialization in dlpar_parse_cc_node
  powerpc/pseries: Fix parsing of initial node path in update_dt_node
  powerpc/pseries: Pack update_props_workarea to map correctly to rtas buffer header
  powerpc/pseries: Fix over writing of rtas return code in update_dt_node
  powerpc/pseries: Fix creation of loop in device node property list
  powerpc: Skip emulating & leave interrupts off for kernel program checks
  powerpc: Add more exception trampolines for hypervisor exceptions
  powerpc: Fix location and rename exception trampolines
  powerpc: Add more trap names to xmon
  powerpc/pseries: Add a warning in the case of cross-cpu VPA registration
  powerpc: Update the 00-Index in Documentation/powerpc
  ...

Documentation/devicetree/bindings/crypto/fsl-sec6.txt

+SEC 6 is as Freescale's Cryptographic Accelerator and Assurance Module (CAAM).
+Currently Freescale powerpc chip C29X is embeded with SEC 6.
+SEC 6 device tree binding include:
+   -SEC 6 Node
+   -Job Ring Node
+   -Full Example
+
+=====================================================================
+SEC 6 Node
+
+Description
+
+    Node defines the base address of the SEC 6 block.
+    This block specifies the address range of all global
+    configuration registers for the SEC 6 block.
+    For example, In C293, we could see three SEC 6 node.
+
+PROPERTIES
+
+   - compatible
+      Usage: required
+      Value type: <string>
+      Definition: Must include "fsl,sec-v6.0".
+
+   - fsl,sec-era
+      Usage: optional
+      Value type: <u32>
+      Definition: A standard property. Define the 'ERA' of the SEC
+          device.
+
+   - #address-cells
+       Usage: required
+       Value type: <u32>
+       Definition: A standard property.  Defines the number of cells
+           for representing physical addresses in child nodes.
+
+   - #size-cells
+       Usage: required
+       Value type: <u32>
+       Definition: A standard property.  Defines the number of cells
+           for representing the size of physical addresses in
+           child nodes.
+
+   - reg
+      Usage: required
+      Value type: <prop-encoded-array>
+      Definition: A standard property.  Specifies the physical
+          address and length of the SEC 6 configuration registers.
+
+   - ranges
+       Usage: required
+       Value type: <prop-encoded-array>
+       Definition: A standard property.  Specifies the physical address
+           range of the SEC 6.0 register space (-SNVS not included).  A
+           triplet that includes the child address, parent address, &
+           length.
+
+   Note: All other standard properties (see the ePAPR) are allowed
+   but are optional.
+
+EXAMPLE
+	crypto@a0000 {
+		compatible = "fsl,sec-v6.0";
+		fsl,sec-era = <6>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0xa0000 0x20000>;
+		ranges = <0 0xa0000 0x20000>;
+	};
+
+=====================================================================
+Job Ring (JR) Node
+
+    Child of the crypto node defines data processing interface to SEC 6
+    across the peripheral bus for purposes of processing
+    cryptographic descriptors. The specified address
+    range can be made visible to one (or more) cores.
+    The interrupt defined for this node is controlled within
+    the address range of this node.
+
+  - compatible
+      Usage: required
+      Value type: <string>
+      Definition: Must include "fsl,sec-v6.0-job-ring".
+
+  - reg
+      Usage: required
+      Value type: <prop-encoded-array>
+      Definition: Specifies a two JR parameters:  an offset from
+           the parent physical address and the length the JR registers.
+
+   - interrupts
+      Usage: required
+      Value type: <prop_encoded-array>
+      Definition:  Specifies the interrupts generated by this
+           device.  The value of the interrupts property
+           consists of one interrupt specifier. The format
+           of the specifier is defined by the binding document
+           describing the node's interrupt parent.
+
+EXAMPLE
+	jr@1000 {
+		compatible = "fsl,sec-v6.0-job-ring";
+		reg = <0x1000 0x1000>;
+		interrupts = <49 2 0 0>;
+	};
+
+===================================================================
+Full Example
+
+Since some chips may contain more than one SEC, the dtsi contains
+only the node contents, not the node itself.  A chip using the SEC
+should include the dtsi inside each SEC node.  Example:
+
+In qoriq-sec6.0.dtsi:
+
+	compatible = "fsl,sec-v6.0";
+	fsl,sec-era = <6>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	jr@1000 {
+		compatible = "fsl,sec-v6.0-job-ring",
+			     "fsl,sec-v5.2-job-ring",
+			     "fsl,sec-v5.0-job-ring",
+			     "fsl,sec-v4.4-job-ring",
+			     "fsl,sec-v4.0-job-ring";
+		reg	   = <0x1000 0x1000>;
+	};
+
+	jr@2000 {
+		compatible = "fsl,sec-v6.0-job-ring",
+			     "fsl,sec-v5.2-job-ring",
+			     "fsl,sec-v5.0-job-ring",
+			     "fsl,sec-v4.4-job-ring",
+			     "fsl,sec-v4.0-job-ring";
+		reg	   = <0x2000 0x1000>;
+	};
+
+In the C293 device tree, we add the include of public property:
+
+	crypto@a0000 {
+		/include/ "qoriq-sec6.0.dtsi"
+	}
+
+	crypto@a0000 {
+		reg = <0xa0000 0x20000>;
+		ranges = <0 0xa0000 0x20000>;
+
+		jr@1000 {
+			interrupts = <49 2 0 0>;
+		};
+
+		jr@2000 {
+			interrupts = <50 2 0 0>;
+		};
+	};

Documentation/devicetree/bindings/powerpc/fsl/msi-pic.txt

 * Freescale MSI interrupt controller
 
 Required properties:
-- compatible : compatible list, contains 2 entries,
-  first is "fsl,CHIP-msi", where CHIP is the processor(mpc8610, mpc8572,
-  etc.) and the second is "fsl,mpic-msi" or "fsl,ipic-msi" depending on
-  the parent type.
+- compatible : compatible list, may contain one or two entries
+  The first is "fsl,CHIP-msi", where CHIP is the processor(mpc8610, mpc8572,
+  etc.) and the second is "fsl,mpic-msi" or "fsl,ipic-msi" or
+  "fsl,mpic-msi-v4.3" depending on the parent type and version. If mpic
+  version is 4.3, the number of MSI registers is increased to 16, MSIIR1 is
+  provided to access these 16 registers, and compatible "fsl,mpic-msi-v4.3"
+  should be used. The first entry is optional; the second entry is
+  required.
 
 - reg : It may contain one or two regions. The first region should contain
   the address and the length of the shared message interrupt register set.
-  The second region should contain the address of aliased MSIIR register for
-  platforms that have such an alias.
-
-- msi-available-ranges: use <start count> style section to define which
-  msi interrupt can be used in the 256 msi interrupts. This property is
-  optional, without this, all the 256 MSI interrupts can be used.
-  Each available range must begin and end on a multiple of 32 (i.e.
-  no splitting an individual MSI register or the associated PIC interrupt).
+  The second region should contain the address of aliased MSIIR or MSIIR1
+  register for platforms that have such an alias, if using MSIIR1, the second
+  region must be added because different MSI group has different MSIIR1 offset.
 
 - interrupts : each one of the interrupts here is one entry per 32 MSIs,
   and routed to the host interrupt controller. the interrupts should
@@ -28,6 +27,14 @@ Required properties:
   to MPIC.
 
 Optional properties:
+- msi-available-ranges: use <start count> style section to define which
+  msi interrupt can be used in the 256 msi interrupts. This property is
+  optional, without this, all the MSI interrupts can be used.
+  Each available range must begin and end on a multiple of 32 (i.e.
+  no splitting an individual MSI register or the associated PIC interrupt).
+  MPIC v4.3 does not support this property because the 32 interrupts of an
+  individual register are not continuous when using MSIIR1.
+
 - msi-address-64: 64-bit PCI address of the MSIIR register. The MSIIR register
   is used for MSI messaging.  The address of MSIIR in PCI address space is
   the MSI message address.
@@ -54,6 +61,28 @@ Example:
 		interrupt-parent = <&mpic>;
 	};
 
+	msi@41600 {
+		compatible = "fsl,mpic-msi-v4.3";
+		reg = <0x41600 0x200 0x44148 4>;
+		interrupts = <
+			0xe0 0 0 0
+			0xe1 0 0 0
+			0xe2 0 0 0
+			0xe3 0 0 0
+			0xe4 0 0 0
+			0xe5 0 0 0
+			0xe6 0 0 0
+			0xe7 0 0 0
+			0x100 0 0 0
+			0x101 0 0 0
+			0x102 0 0 0
+			0x103 0 0 0
+			0x104 0 0 0
+			0x105 0 0 0
+			0x106 0 0 0
+			0x107 0 0 0>;
+	};
+
 The Freescale hypervisor and msi-address-64
 -------------------------------------------
 Normally, PCI devices have access to all of CCSR via an ATMU mapping.  The

Documentation/powerpc/00-INDEX

@@ -5,13 +5,20 @@ please mail me.
 
 00-INDEX
 	- this file
+bootwrapper.txt
+	- Information on how the powerpc kernel is wrapped for boot on various
+	  different platforms.
 cpu_features.txt
 	- info on how we support a variety of CPUs with minimal compile-time
 	options.
 eeh-pci-error-recovery.txt
 	- info on PCI Bus EEH Error Recovery
+firmware-assisted-dump.txt
+	- Documentation on the firmware assisted dump mechanism "fadump".
 hvcs.txt
 	- IBM "Hypervisor Virtual Console Server" Installation Guide
+kvm_440.txt
+	- Various notes on the implementation of KVM for PowerPC 440.
 mpc52xx.txt
 	- Linux 2.6.x on MPC52xx family
 pmu-ebb.txt
@@ -19,3 +26,7 @@ pmu-ebb.txt
 qe_firmware.txt
 	- describes the layout of firmware binaries for the Freescale QUICC
 	  Engine and the code that parses and uploads the microcode therein.
+ptrace.txt
+	- Information on the ptrace interfaces for hardware debug registers.
+transactional_memory.txt
+	- Overview of the Power8 transactional memory support.

arch/powerpc/Kconfig

@@ -312,6 +312,26 @@ config MATH_EMULATION
 	  such as fsqrt on cores that do have an FPU but do not implement
 	  them (such as Freescale BookE).
 
+choice
+	prompt "Math emulation options"
+	default MATH_EMULATION_FULL
+	depends on MATH_EMULATION
+
+config	MATH_EMULATION_FULL
+	bool "Emulate all the floating point instructions"
+	---help---
+	  Select this option will enable the kernel to support to emulate
+	  all the floating point instructions. If your SoC doesn't have
+	  a FPU, you should select this.
+
+config MATH_EMULATION_HW_UNIMPLEMENTED
+	bool "Just emulate the FPU unimplemented instructions"
+	---help---
+	  Select this if you know there does have a hardware FPU on your
+	  SoC, but some floating point instructions are not implemented by that.
+
+endchoice
+
 config PPC_TRANSACTIONAL_MEM
        bool "Transactional Memory support for POWERPC"
        depends on PPC_BOOK3S_64

arch/powerpc/Makefile

@@ -88,13 +88,30 @@ CFLAGS-$(CONFIG_PPC64)	+= $(call cc-option,-mcmodel=medium,-mminimal-toc)
 CFLAGS-$(CONFIG_PPC64)	+= $(call cc-option,-mno-pointers-to-nested-functions)
 CFLAGS-$(CONFIG_PPC32)	:= -ffixed-r2 -mmultiple
 
+ifeq ($(CONFIG_PPC_BOOK3S_64),y)
 CFLAGS-$(CONFIG_GENERIC_CPU) += $(call cc-option,-mtune=power7,-mtune=power4)
+else
+CFLAGS-$(CONFIG_GENERIC_CPU) += -mcpu=powerpc64
+endif
+
 CFLAGS-$(CONFIG_CELL_CPU) += $(call cc-option,-mcpu=cell)
 CFLAGS-$(CONFIG_POWER4_CPU) += $(call cc-option,-mcpu=power4)
 CFLAGS-$(CONFIG_POWER5_CPU) += $(call cc-option,-mcpu=power5)
 CFLAGS-$(CONFIG_POWER6_CPU) += $(call cc-option,-mcpu=power6)
 CFLAGS-$(CONFIG_POWER7_CPU) += $(call cc-option,-mcpu=power7)
 
+E5500_CPU := $(call cc-option,-mcpu=e500mc64,-mcpu=powerpc64)
+CFLAGS-$(CONFIG_E5500_CPU) += $(E5500_CPU)
+CFLAGS-$(CONFIG_E6500_CPU) += $(call cc-option,-mcpu=e6500,$(E5500_CPU))
+
+ifeq ($(CONFIG_PPC32),y)
+ifeq ($(CONFIG_PPC_E500MC),y)
+CFLAGS-y += $(call cc-option,-mcpu=e500mc,-mcpu=powerpc)
+else
+CFLAGS-$(CONFIG_E500) += $(call cc-option,-mcpu=8540 -msoft-float,-mcpu=powerpc)
+endif
+endif
+
 CFLAGS-$(CONFIG_TUNE_CELL) += $(call cc-option,-mtune=cell)
 
 KBUILD_CPPFLAGS	+= -Iarch/$(ARCH)
@@ -139,7 +156,6 @@ endif
 
 cpu-as-$(CONFIG_4xx)		+= -Wa,-m405
 cpu-as-$(CONFIG_ALTIVEC)	+= -Wa,-maltivec
-cpu-as-$(CONFIG_E500)		+= -Wa,-me500
 cpu-as-$(CONFIG_E200)		+= -Wa,-me200
 
 KBUILD_AFLAGS += $(cpu-as-y)

arch/powerpc/boot/.gitignore

@@ -22,6 +22,7 @@ zImage.initrd
 zImage.bin.*
 zImage.chrp
 zImage.coff
+zImage.epapr
 zImage.holly
 zImage.*lds
 zImage.miboot

arch/powerpc/boot/dts/ac14xx.dts

@@ -10,7 +10,7 @@
  */
 
 
-/include/ "mpc5121.dtsi"
+#include <mpc5121.dtsi>
 
 / {
 	model = "ac14xx";

arch/powerpc/boot/dts/b4420qds.dts

@@ -33,7 +33,7 @@
  */
 
 /include/ "fsl/b4420si-pre.dtsi"
-/include/ "b4qds.dts"
+/include/ "b4qds.dtsi"
 
 / {
 	model = "fsl,B4420QDS";

arch/powerpc/boot/dts/b4860qds.dts

@@ -33,7 +33,7 @@
  */
 
 /include/ "fsl/b4860si-pre.dtsi"
-/include/ "b4qds.dts"
+/include/ "b4qds.dtsi"
 
 / {
 	model = "fsl,B4860QDS";

arch/powerpc/boot/dts/c293pcie.dts

+/*
+ * C293 PCIE Device Tree Source
+ *
+ * Copyright 2013 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "fsl/c293si-pre.dtsi"
+
+/ {
+	model = "fsl,C293PCIE";
+	compatible = "fsl,C293PCIE";
+
+	memory {
+		device_type = "memory";
+	};
+
+	ifc: ifc@fffe1e000 {
+		reg = <0xf 0xffe1e000 0 0x2000>;
+		ranges = <0x0 0x0 0xf 0xec000000 0x04000000
+			  0x2 0x0 0xf 0xffdf0000 0x00010000>;
+
+	};
+
+	soc: soc@fffe00000 {
+		ranges = <0x0 0xf 0xffe00000 0x100000>;
+	};
+
+	pci0: pcie@fffe0a000 {
+		reg = <0xf 0xffe0a000 0 0x1000>;
+		ranges = <0x2000000 0x0 0x80000000 0xc 0x00000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0xf 0xffc00000 0x0 0x10000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0x80000000
+				  0x2000000 0x0 0x80000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+};
+
+&ifc {
+	nor@0,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "cfi-flash";
+		reg = <0x0 0x0 0x4000000>;
+		bank-width = <2>;
+		device-width = <1>;
+
+		partition@0 {
+			/* 1MB for DTB Image */
+			reg = <0x0 0x00100000>;
+			label = "NOR DTB Image";
+		};
+
+		partition@100000 {
+			/* 8 MB for Linux Kernel Image */
+			reg = <0x00100000 0x00800000>;
+			label = "NOR Linux Kernel Image";
+		};
+
+		partition@900000 {
+			/* 53MB for rootfs */
+			reg = <0x00900000 0x03500000>;
+			label = "NOR Rootfs Image";
+		};
+
+		partition@3e00000 {
+			/* 1MB for blob encrypted key */
+			reg = <0x03e00000 0x00100000>;
+			label = "NOR blob encrypted key";
+		};
+
+		partition@3f00000 {
+			/* 512KB for u-boot Bootloader Image and evn */
+			reg = <0x03f00000 0x00100000>;
+			label = "NOR U-Boot Image";
+			read-only;
+		};
+	};
+
+	nand@1,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "fsl,ifc-nand";
+		reg = <0x1 0x0 0x10000>;
+
+		partition@0 {
+			/* This location must not be altered  */
+			/* 1MB for u-boot Bootloader Image */
+			reg = <0x0 0x00100000>;
+			label = "NAND U-Boot Image";
+			read-only;
+		};
+
+		partition@100000 {
+			/* 1MB for DTB Image */
+			reg = <0x00100000 0x00100000>;
+			label = "NAND DTB Image";
+		};
+
+		partition@200000 {
+			/* 16MB for Linux Kernel Image */
+			reg = <0x00200000 0x01000000>;
+			label = "NAND Linux Kernel Image";
+		};
+
+		partition@1200000 {
+			/* 4078MB for Root file System Image */
+			reg = <0x00600000 0xfee00000>;
+			label = "NAND RFS Image";
+		};
+	};
+
+	cpld@2,0 {
+		compatible = "fsl,c293pcie-cpld";
+		reg = <0x2 0x0 0x20>;
+	};
+};
+
+&soc {
+	i2c@3000 {
+		eeprom@50 {
+			compatible = "st,24c1024";
+			reg = <0x50>;
+		};
+
+		adt7461@4c {
+			compatible = "adi,adt7461";
+			reg = <0x4c>;
+		};
+	};
+
+	spi@7000 {
+		flash@0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "spansion,s25sl12801";
+			reg = <0>;
+			spi-max-frequency = <50000000>;
+
+			partition@0 {
+				/* 1MB for u-boot Bootloader Image */
+				/* 1MB for Environment */
+				reg = <0x0 0x00100000>;
+				label = "SPI Flash U-Boot Image";
+				read-only;
+			};
+
+			partition@100000 {
+				/* 512KB for DTB Image */
+				reg = <0x00100000 0x00080000>;
+				label = "SPI Flash DTB Image";
+			};
+
+			partition@180000 {
+				/* 4MB for Linux Kernel Image */
+				reg = <0x00180000 0x00400000>;
+				label = "SPI Flash Linux Kernel Image";
+			};
+
+			partition@580000 {
+				/* 10.5MB for RFS Image */
+				reg = <0x00580000 0x00a80000>;
+				label = "SPI Flash RFS Image";
+			};
+		};
+	};
+
+	mdio@24000 {
+		phy0: ethernet-phy@0 {
+			interrupts = <2 1 0 0>;
+			reg = <0x0>;
+		};
+
+		phy1: ethernet-phy@1 {
+			interrupts = <2 1 0 0>;
+			reg = <0x2>;
+		};
+	};
+
+	enet0: ethernet@b0000 {
+		phy-handle = <&phy0>;
+		phy-connection-type = "rgmii-id";
+	};
+
+	enet1: ethernet@b1000 {
+		phy-handle = <&phy1>;
+		phy-connection-type = "rgmii-id";
+	};
+};
+/include/ "fsl/c293si-post.dtsi"

arch/powerpc/boot/dts/fsl/b4si-post.dtsi

@@ -204,7 +204,7 @@
 		};
 	};
 
-/include/ "qoriq-mpic.dtsi"
+/include/ "qoriq-mpic4.3.dtsi"
 
 	guts: global-utilities@e0000 {
 		compatible = "fsl,b4-device-config";

arch/powerpc/boot/dts/fsl/c293si-post.dtsi

+/*
+ * C293 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2012 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&ifc {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	compatible = "fsl,ifc", "simple-bus";
+	interrupts = <19 2 0 0>;
+};
+
+/* controller at 0xa000 */
+&pci0 {
+	compatible = "fsl,qoriq-pcie-v2.2", "fsl,qoriq-pcie";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0 255>;
+	clock-frequency = <33333333>;
+	interrupts = <16 2 0 0>;
+
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <16 2 0 0>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0
+			0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0
+			0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0
+			0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0
+			>;
+	};
+};
+
+&soc {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	device_type = "soc";
+	compatible = "simple-bus";
+	bus-frequency = <0>;		// Filled out by uboot.
+
+	ecm-law@0 {
+		compatible = "fsl,ecm-law";
+		reg = <0x0 0x1000>;
+		fsl,num-laws = <12>;
+	};
+
+	ecm@1000 {
+		compatible = "fsl,c293-ecm", "fsl,ecm";
+		reg = <0x1000 0x1000>;
+		interrupts = <16 2 0 0>;
+	};
+
+	memory-controller@2000 {
+		compatible = "fsl,c293-memory-controller";
+		reg = <0x2000 0x1000>;
+		interrupts = <16 2 0 0>;
+	};
+
+/include/ "pq3-i2c-0.dtsi"
+/include/ "pq3-i2c-1.dtsi"
+/include/ "pq3-duart-0.dtsi"
+/include/ "pq3-espi-0.dtsi"
+	spi0: spi@7000 {
+		fsl,espi-num-chipselects = <1>;
+	};
+
+/include/ "pq3-gpio-0.dtsi"
+	L2: l2-cache-controller@20000 {
+		compatible = "fsl,c293-l2-cache-controller";
+		reg = <0x20000 0x1000>;
+		cache-line-size = <32>;	// 32 bytes
+		cache-size = <0x80000>; // L2,512K
+		interrupts = <16 2 0 0>;
+	};
+
+/include/ "pq3-dma-0.dtsi"
+/include/ "pq3-esdhc-0.dtsi"
+	sdhc@2e000 {
+		compatible = "fsl,c293-esdhc", "fsl,esdhc";
+		sdhci,auto-cmd12;
+	};
+
+	crypto@80000 {
+/include/ "qoriq-sec6.0-0.dtsi"
+	};
+
+	crypto@80000 {
+		reg = <0x80000 0x20000>;
+		ranges = <0x0 0x80000 0x20000>;
+
+		jr@1000{
+			interrupts = <45 2 0 0>;
+		};
+		jr@2000{
+			interrupts = <57 2 0 0>;
+		};
+	};
+
+	crypto@a0000 {
+/include/ "qoriq-sec6.0-0.dtsi"
+	};
+
+	crypto@a0000 {
+		reg = <0xa0000 0x20000>;
+		ranges = <0x0 0xa0000 0x20000>;
+
+		jr@1000{
+			interrupts = <49 2 0 0>;
+		};
+		jr@2000{
+			interrupts = <50 2 0 0>;
+		};
+	};
+
+	crypto@c0000 {
+/include/ "qoriq-sec6.0-0.dtsi"
+	};
+
+	crypto@c0000 {
+		reg = <0xc0000 0x20000>;
+		ranges = <0x0 0xc0000 0x20000>;
+
+		jr@1000{
+			interrupts = <55 2 0 0>;
+		};
+		jr@2000{
+			interrupts = <56 2 0 0>;
+		};
+	};
+
+/include/ "pq3-mpic.dtsi"
+/include/ "pq3-mpic-timer-B.dtsi"
+
+/include/ "pq3-etsec2-0.dtsi"
+	enet0: ethernet@b0000 {
+		queue-group@b0000 {
+			reg = <0x10000 0x1000>;
+			fsl,rx-bit-map = <0xff>;
+			fsl,tx-bit-map = <0xff>;
+		};
+	};
+
+/include/ "pq3-etsec2-1.dtsi"
+	enet1: ethernet@b1000 {
+		queue-group@b1000 {
+			reg = <0x11000 0x1000>;
+			fsl,rx-bit-map = <0xff>;
+			fsl,tx-bit-map = <0xff>;
+		};
+	};
+
+	global-utilities@e0000 {
+		compatible = "fsl,c293-guts";
+		reg = <0xe0000 0x1000>;
+		fsl,has-rstcr;
+	};
+};

arch/powerpc/boot/dts/fsl/c293si-pre.dtsi

+/*
+ * C293 Silicon/SoC Device Tree Source (pre include)
+ *
+ * Copyright 2012 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+/include/ "e500v2_power_isa.dtsi"
+
+/ {
+	compatible = "fsl,C293";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+
+	aliases {
+		serial0 = &serial0;
+		serial1 = &serial1;
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		pci0 = &pci0;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,e500v2@0 {
+			device_type = "cpu";
+			reg = <0x0>;
+			next-level-cache = <&L2>;
+		};
+	};
+};

arch/powerpc/boot/dts/fsl/qoriq-mpic4.3.dtsi

+/*
+ * QorIQ MPIC device tree stub [ controller @ offset 0x40000 ]
+ *
+ * Copyright 2013 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+mpic: pic@40000 {
+	interrupt-controller;
+	#address-cells = <0>;
+	#interrupt-cells = <4>;
+	reg = <0x40000 0x40000>;
+	compatible = "fsl,mpic";
+	device_type = "open-pic";
+	clock-frequency = <0x0>;
+};
+
+timer@41100 {
+	compatible = "fsl,mpic-global-timer";
+	reg = <0x41100 0x100 0x41300 4>;
+	interrupts = <0 0 3 0
+		      1 0 3 0
+		      2 0 3 0
+		      3 0 3 0>;
+};
+
+msi0: msi@41600 {
+	compatible = "fsl,mpic-msi-v4.3";
+	reg = <0x41600 0x200 0x44148 4>;
+	interrupts = <
+		0xe0 0 0 0
+		0xe1 0 0 0
+		0xe2 0 0 0
+		0xe3 0 0 0
+		0xe4 0 0 0
+		0xe5 0 0 0
+		0xe6 0 0 0
+		0xe7 0 0 0
+		0x100 0 0 0
+		0x101 0 0 0
+		0x102 0 0 0
+		0x103 0 0 0
+		0x104 0 0 0
+		0x105 0 0 0
+		0x106 0 0 0
+		0x107 0 0 0>;
+};
+
+msi1: msi@41800 {
+	compatible = "fsl,mpic-msi-v4.3";
+	reg = <0x41800 0x200 0x45148 4>;
+	interrupts = <
+		0xe8 0 0 0
+		0xe9 0 0 0
+		0xea 0 0 0
+		0xeb 0 0 0
+		0xec 0 0 0
+		0xed 0 0 0
+		0xee 0 0 0
+		0xef 0 0 0
+		0x108 0 0 0
+		0x109 0 0 0
+		0x10a 0 0 0
+		0x10b 0 0 0
+		0x10c 0 0 0
+		0x10d 0 0 0
+		0x10e 0 0 0
+		0x10f 0 0 0>;
+};
+
+msi2: msi@41a00 {
+	compatible = "fsl,mpic-msi-v4.3";
+	reg = <0x41a00 0x200 0x46148 4>;
+	interrupts = <
+		0xf0 0 0 0
+		0xf1 0 0 0
+		0xf2 0 0 0
+		0xf3 0 0 0
+		0xf4 0 0 0
+		0xf5 0 0 0
+		0xf6 0 0 0
+		0xf7 0 0 0
+		0x110 0 0 0
+		0x111 0 0 0
+		0x112 0 0 0
+		0x113 0 0 0
+		0x114 0 0 0
+		0x115 0 0 0
+		0x116 0 0 0
+		0x117 0 0 0>;
+};
+
+msi3: msi@41c00 {
+	compatible = "fsl,mpic-msi-v4.3";
+	reg = <0x41c00 0x200 0x47148 4>;
+	interrupts = <
+		0xf8 0 0 0
+		0xf9 0 0 0
+		0xfa 0 0 0
+		0xfb 0 0 0
+		0xfc 0 0 0
+		0xfd 0 0 0
+		0xfe 0 0 0
+		0xff 0 0 0
+		0x118 0 0 0
+		0x119 0 0 0
+		0x11a 0 0 0
+		0x11b 0 0 0
+		0x11c 0 0 0
+		0x11d 0 0 0
+		0x11e 0 0 0
+		0x11f 0 0 0>;
+};
+
+timer@42100 {
+	compatible = "fsl,mpic-global-timer";
+	reg = <0x42100 0x100 0x42300 4>;
+	interrupts = <4 0 3 0
+		      5 0 3 0
+		      6 0 3 0
+		      7 0 3 0>;
+};

arch/powerpc/boot/dts/fsl/qoriq-sec6.0-0.dtsi

+/*
+ * QorIQ Sec/Crypto 6.0 device tree stub
+ *
+ * Copyright 2013 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+	compatible = "fsl,sec-v6.0";
+	fsl,sec-era = <6>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	jr@1000 {
+		compatible = "fsl,sec-v6.0-job-ring",
+			     "fsl,sec-v5.2-job-ring",
+			     "fsl,sec-v5.0-job-ring",
+			     "fsl,sec-v4.4-job-ring",
+			     "fsl,sec-v4.0-job-ring";
+		reg	   = <0x1000 0x1000>;
+	};
+
+	jr@2000 {
+		compatible = "fsl,sec-v6.0-job-ring",
+			     "fsl,sec-v5.2-job-ring",
+			     "fsl,sec-v5.0-job-ring",
+			     "fsl,sec-v4.4-job-ring",
+			     "fsl,sec-v4.0-job-ring";
+		reg	   = <0x2000 0x1000>;
+	};

arch/powerpc/boot/dts/fsl/t4240si-post.dtsi

@@ -358,7 +358,7 @@
 			16 2 1 30>;
 	};
 
-/include/ "qoriq-mpic.dtsi"
+/include/ "qoriq-mpic4.3.dtsi"
 
 	guts: global-utilities@e0000 {
 		compatible = "fsl,t4240-device-config", "fsl,qoriq-device-config-2.0";

arch/powerpc/boot/dts/include/dt-bindings

+../../../../../include/dt-bindings
\ No newline at end of file

arch/powerpc/boot/dts/mpc5121ads.dts

@@ -9,7 +9,7 @@
  * option) any later version.
  */
 
-/include/ "mpc5121.dtsi"
+#include <mpc5121.dtsi>
 
 / {
 	model = "mpc5121ads";

arch/powerpc/boot/dts/p1020rdb-pd.dts

+/*
+ * P1020 RDB-PD Device Tree Source (32-bit address map)
+ *
+ * Copyright 2013 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "fsl/p1020si-pre.dtsi"
+/ {
+	model = "fsl,P1020RDB-PD";
+	compatible = "fsl,P1020RDB-PD";
+
+	memory {
+		device_type = "memory";
+	};
+
+	lbc: localbus@ffe05000 {
+		reg = <0x0 0xffe05000 0x0 0x1000>;
+
+		/* NOR, NAND flash, L2 switch and CPLD */
+		ranges = <0x0 0x0 0x0 0xec000000 0x04000000
+			  0x1 0x0 0x0 0xff800000 0x00040000
+			  0x2 0x0 0x0 0xffa00000 0x00020000
+			  0x3 0x0 0x0 0xffb00000 0x00020000>;
+
+		nor@0,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "cfi-flash";
+			reg = <0x0 0x0 0x4000000>;
+			bank-width = <2>;
+			device-width = <1>;
+
+			partition@0 {
+				/* 128KB for DTB Image */
+				reg = <0x0 0x00020000>;
+				label = "NOR DTB Image";
+			};
+
+			partition@20000 {
+				/* 3.875 MB for Linux Kernel Image */
+				reg = <0x00020000 0x003e0000>;
+				label = "NOR Linux Kernel Image";
+			};
+
+			partition@400000 {
+				/* 58MB for Root file System */
+				reg = <0x00400000 0x03a00000>;
+				label = "NOR Root File System";
+			};
+
+			partition@3e00000 {
+				/* This location must not be altered  */
+				/* 1M for Vitesse 7385 Switch firmware */
+				reg = <0x3e00000 0x00100000>;
+				label = "NOR Vitesse-7385 Firmware";
+				read-only;
+			};
+
+			partition@3f00000 {
+				/* This location must not be altered  */
+				/* 512KB for u-boot Bootloader Image */
+				/* 512KB for u-boot Environment Variables */
+				reg = <0x03f00000 0x00100000>;
+				label = "NOR U-Boot Image";
+				read-only;
+			};
+		};
+
+		nand@1,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,p1020-fcm-nand",
+				     "fsl,elbc-fcm-nand";
+			reg = <0x1 0x0 0x40000>;
+
+			partition@0 {
+				/* This location must not be altered  */
+				/* 1MB for u-boot Bootloader Image */
+				reg = <0x0 0x00100000>;
+				label = "NAND U-Boot Image";
+				read-only;
+			};
+
+			partition@100000 {
+				/* 1MB for DTB Image */
+				reg = <0x00100000 0x00100000>;
+				label = "NAND DTB Image";
+			};
+
+			partition@200000 {
+				/* 4MB for Linux Kernel Image */
+				reg = <0x00200000 0x00400000>;
+				label = "NAND Linux Kernel Image";
+			};
+
+			partition@600000 {
+				/* 122MB for File System Image */
+				reg = <0x00600000 0x07a00000>;
+				label = "NAND File System Image";
+			};
+		};
+
+		cpld@2,0 {
+			compatible = "fsl,p1020rdb-pd-cpld";
+			reg = <0x2 0x0 0x20000>;
+		};
+
+		L2switch@3,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "vitesse-7385";
+			reg = <0x3 0x0 0x20000>;
+		};
+	};
+
+	soc: soc@ffe00000 {
+		ranges = <0x0 0x0 0xffe00000 0x100000>;
+
+		i2c@3000 {
+			rtc@68 {
+				compatible = "dallas,ds1339";
+				reg = <0x68>;
+			};
+		};
+
+		spi@7000 {
+			flash@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "spansion,s25sl12801";
+				reg = <0>;
+				/* input clock */
+				spi-max-frequency = <40000000>;
+
+				partition@0 {
+					/* 512KB for u-boot Bootloader Image */
+					reg = <0x0 0x00080000>;
+					label = "SPI U-Boot Image";
+					read-only;
+				};
+
+				partition@80000 {
+					/* 512KB for DTB Image*/
+					reg = <0x00080000 0x00080000>;
+					label = "SPI DTB Image";
+				};
+
+				partition@100000 {
+					/* 4MB for Linux Kernel Image */
+					reg = <0x00100000 0x00400000>;
+					label = "SPI Linux Kernel Image";
+				};
+
+				partition@500000 {
+					/* 11MB for FS System Image */
+					reg = <0x00500000 0x00b00000>;
+					label = "SPI File System Image";
+				};
+			};
+
+			slic@0 {
+				compatible = "zarlink,le88266";
+				reg = <1>;
+				spi-max-frequency = <8000000>;
+			};
+
+			slic@1 {
+				compatible = "zarlink,le88266";
+				reg = <2>;
+				spi-max-frequency = <8000000>;
+			};
+		};
+
+		mdio@24000 {
+			phy0: ethernet-phy@0 {
+				interrupts = <3 1 0 0>;
+				reg = <0x0>;
+			};
+
+			phy1: ethernet-phy@1 {
+				interrupts = <2 1 0 0>;
+				reg = <0x1>;
+			};
+		};
+
+		mdio@25000 {
+			tbi1: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
+		};
+
+		mdio@26000 {
+			tbi2: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
+		};
+
+		enet0: ethernet@b0000 {
+			fixed-link = <1 1 1000 0 0>;
+			phy-connection-type = "rgmii-id";
+		};
+
+		enet1: ethernet@b1000 {
+			phy-handle = <&phy0>;
+			tbi-handle = <&tbi1>;
+			phy-connection-type = "sgmii";
+		};
+
+		enet2: ethernet@b2000 {
+			phy-handle = <&phy1>;
+			phy-connection-type = "rgmii-id";
+		};
+
+		usb@22000 {
+			phy_type = "ulpi";
+		};
+	};
+
+	pci0: pcie@ffe09000 {
+		reg = <0x0 0xffe09000 0x0 0x1000>;
+		ranges = <0x2000000 0x0 0xa0000000 0x0 0xa0000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0x0 0xffc10000 0x0 0x10000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0xa0000000
+				  0x2000000 0x0 0xa0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+
+	pci1: pcie@ffe0a000 {
+		reg = <0x0 0xffe0a000 0x0 0x1000>;
+		ranges = <0x2000000 0x0 0x80000000 0x0 0x80000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0x0 0xffc00000 0x0 0x10000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0x80000000
+				  0x2000000 0x0 0x80000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+};
+
+/include/ "fsl/p1020si-post.dtsi"

arch/powerpc/boot/dts/p1023rdb.dts

+/*
+ * P1023 RDB Device Tree Source
+ *
+ *    Copyright 2013 Freescale Semiconductor Inc.
+ *
+ * Author: Chunhe Lan <Chunhe.Lan@freescale.com>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "fsl/p1023si-pre.dtsi"
+
+/ {
+	model = "fsl,P1023";
+	compatible = "fsl,P1023RDB";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+
+	memory {
+		device_type = "memory";
+	};
+
+	soc: soc@ff600000 {
+		ranges = <0x0 0x0 0xff600000 0x200000>;
+
+		i2c@3000 {
+			eeprom@53 {
+				compatible = "at24,24c04";
+				reg = <0x53>;
+			};
+
+			rtc@6f {
+				compatible = "microchip,mcp7941x";
+				reg = <0x6f>;
+			};
+		};
+
+		usb@22000 {
+			dr_mode = "host";
+			phy_type = "ulpi";
+		};
+	};
+
+	lbc: localbus@ff605000 {
+		reg = <0 0xff605000 0 0x1000>;
+
+		/* NOR, NAND Flashes */
+		ranges = <0x0 0x0 0x0 0xec000000 0x04000000
+			  0x1 0x0 0x0 0xffa00000 0x08000000>;
+
+		nor@0,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "cfi-flash";
+			reg = <0x0 0x0 0x04000000>;
+			bank-width = <2>;
+			device-width = <1>;
+
+			partition@0 {
+				/* 48MB for Root File System */
+				reg = <0x00000000 0x03000000>;
+				label = "NOR Root File System";
+			};
+
+			partition@3000000 {
+				/* 1MB for DTB Image */
+				reg = <0x03000000 0x00100000>;
+				label = "NOR DTB Image";
+			};
+
+			partition@3100000 {
+				/* 14MB for Linux Kernel Image */
+				reg = <0x03100000 0x00e00000>;
+				label = "NOR Linux Kernel Image";
+			};
+
+			partition@3f00000 {
+				/* This location must not be altered  */
+				/* 512KB for u-boot Bootloader Image */
+				/* 512KB for u-boot Environment Variables */
+				reg = <0x03f00000 0x00100000>;
+				label = "NOR U-Boot Image";
+				read-only;
+			};
+		};
+
+		nand@1,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,elbc-fcm-nand";
+			reg = <0x1 0x0 0x40000>;
+
+			partition@0 {
+				/* This location must not be altered  */
+				/* 1MB for u-boot Bootloader Image */
+				reg = <0x0 0x00100000>;
+				label = "NAND U-Boot Image";
+				read-only;
+			};
+
+			partition@100000 {
+				/* 1MB for DTB Image */
+				reg = <0x00100000 0x00100000>;
+				label = "NAND DTB Image";
+			};
+
+			partition@200000 {
+				/* 14MB for Linux Kernel Image */
+				reg = <0x00200000 0x00e00000>;
+				label = "NAND Linux Kernel Image";
+			};
+
+			partition@1000000 {
+				/* 96MB for Root File System Image */
+				reg = <0x01000000 0x06000000>;
+				label = "NAND Root File System";
+			};
+
+			partition@7000000 {
+				/* 16MB for User Writable Area */
+				reg = <0x07000000 0x01000000>;
+				label = "NAND Writable User area";
+			};
+		};
+	};
+
+	pci0: pcie@ff60a000 {
+		reg = <0 0xff60a000 0 0x1000>;
+		ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0 0xffc20000 0x0 0x10000>;
+		pcie@0 {
+			/* IRQ[0:3] are pulled up on board, set to active-low */
+			interrupt-map-mask = <0xf800 0 0 7>;
+			interrupt-map = <
+				/* IDSEL 0x0 */
+				0000 0 0 1 &mpic 0 1 0 0
+				0000 0 0 2 &mpic 1 1 0 0
+				0000 0 0 3 &mpic 2 1 0 0
+				0000 0 0 4 &mpic 3 1 0 0
+				>;
+			ranges = <0x2000000 0x0 0xc0000000
+				  0x2000000 0x0 0xc0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+
+	board_pci1: pci1: pcie@ff609000 {
+		reg = <0 0xff609000 0 0x1000>;
+		ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
+		pcie@0 {
+			/*
+			 * IRQ[4:6] only for PCIe, set to active-high,
+			 * IRQ[7] is pulled up on board, set to active-low
+			 */
+			interrupt-map-mask = <0xf800 0 0 7>;
+			interrupt-map = <
+				/* IDSEL 0x0 */
+				0000 0 0 1 &mpic 4 2 0 0
+				0000 0 0 2 &mpic 5 2 0 0
+				0000 0 0 3 &mpic 6 2 0 0
+				0000 0 0 4 &mpic 7 1 0 0
+				>;
+			ranges = <0x2000000 0x0 0xa0000000
+				  0x2000000 0x0 0xa0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+
+	pci2: pcie@ff60b000 {
+		reg = <0 0xff60b000 0 0x1000>;
+		ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
+		pcie@0 {
+			/*
+			 * IRQ[8:10] are pulled up on board, set to active-low
+			 * IRQ[11] only for PCIe, set to active-high,
+			 */
+			interrupt-map-mask = <0xf800 0 0 7>;
+			interrupt-map = <
+				/* IDSEL 0x0 */
+				0000 0 0 1 &mpic 8 1 0 0
+				0000 0 0 2 &mpic 9 1 0 0
+				0000 0 0 3 &mpic 10 1 0 0
+				0000 0 0 4 &mpic 11 2 0 0
+				>;
+			ranges = <0x2000000 0x0 0x80000000
+				  0x2000000 0x0 0x80000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+
+};
+
+/include/ "fsl/p1023si-post.dtsi"

arch/powerpc/boot/dts/pdm360ng.dts

@@ -13,7 +13,7 @@
  * option) any later version.
  */
 
-/include/ "mpc5121.dtsi"
+#include <mpc5121.dtsi>
 
 / {
 	model = "pdm360ng";

arch/powerpc/boot/ppc_asm.h

@@ -59,4 +59,7 @@
 #define	r30	30
 #define	r31	31
 
+#define SPRN_TBRL	268
+#define SPRN_TBRU	269
+
 #endif /* _PPC64_PPC_ASM_H */

arch/powerpc/boot/util.S

@@ -71,18 +71,18 @@ udelay:
 	add	r4,r4,r5
 	addi	r4,r4,-1
 	divw	r4,r4,r5	/* BUS ticks */
-1:	mftbu	r5
-	mftb	r6
-	mftbu	r7
+1:	mfspr	r5, SPRN_TBRU
+	mfspr	r6, SPRN_TBRL
+	mfspr	r7, SPRN_TBRU
 	cmpw	0,r5,r7
 	bne	1b		/* Get [synced] base time */
 	addc	r9,r6,r4	/* Compute end time */
 	addze	r8,r5
-2:	mftbu	r5
+2:	mfspr	r5, SPRN_TBRU
 	cmpw	0,r5,r8
 	blt	2b
 	bgt	3f
-	mftb	r6
+	mfspr	r6, SPRN_TBRL
 	cmpw	0,r6,r9
 	blt	2b
 3:	blr

arch/powerpc/configs/85xx/p1023rds_defconfig → arch/powerpc/configs/85xx/p1023_defconfig

 CONFIG_PPC_85xx=y
 CONFIG_SMP=y
 CONFIG_NR_CPUS=2
-CONFIG_EXPERIMENTAL=y
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_AUDIT=y
-CONFIG_IRQ_DOMAIN_DEBUG=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
+CONFIG_RCU_FANOUT=32
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
@@ -22,6 +21,8 @@ CONFIG_MODVERSIONS=y
 # CONFIG_BLK_DEV_BSG is not set
 CONFIG_PARTITION_ADVANCED=y
 CONFIG_MAC_PARTITION=y
+CONFIG_PHYSICAL_START=0x00000000
+CONFIG_P1023_RDB=y
 CONFIG_P1023_RDS=y
 CONFIG_QUICC_ENGINE=y
 CONFIG_QE_GPIO=y
@@ -63,10 +64,21 @@ CONFIG_IPV6=y
 CONFIG_IP_SCTP=m
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_MTD=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_PHYSMAP_OF=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_FSL_ELBC=y
 CONFIG_PROC_DEVICETREE=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=131072
+CONFIG_EEPROM_AT24=y
 CONFIG_EEPROM_LEGACY=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_CHR_DEV_ST=y
@@ -82,6 +94,8 @@ CONFIG_DUMMY=y
 CONFIG_FS_ENET=y
 CONFIG_FSL_PQ_MDIO=y
 CONFIG_E1000E=y
+CONFIG_PHYLIB=y
+CONFIG_AT803X_PHY=y
 CONFIG_MARVELL_PHY=y
 CONFIG_DAVICOM_PHY=y
 CONFIG_CICADA_PHY=y
@@ -96,12 +110,15 @@ CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=2
 CONFIG_SERIAL_8250_RUNTIME_UARTS=2
+CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
 CONFIG_SERIAL_8250_DETECT_IRQ=y
 CONFIG_SERIAL_8250_RSA=y
-CONFIG_SERIAL_QE=m
+CONFIG_HW_RANDOM=y
 CONFIG_NVRAM=y
 CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_CPM=m
 CONFIG_I2C_MPC=y
 CONFIG_GPIO_MPC8XXX=y
@@ -121,6 +138,7 @@ CONFIG_USB_STORAGE=y
 CONFIG_EDAC=y
 CONFIG_EDAC_MM_EDAC=y
 CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_DS1307=y
 CONFIG_RTC_DRV_CMOS=y
 CONFIG_DMADEVICES=y
 CONFIG_FSL_DMA=y
@@ -161,6 +179,7 @@ CONFIG_DEBUG_FS=y
 CONFIG_DETECT_HUNG_TASK=y
 # CONFIG_DEBUG_BUGVERBOSE is not set
 CONFIG_DEBUG_INFO=y
+CONFIG_STRICT_DEVMEM=y
 CONFIG_CRYPTO_PCBC=m
 CONFIG_CRYPTO_SHA256=y
 CONFIG_CRYPTO_SHA512=y

arch/powerpc/configs/corenet32_smp_defconfig

@@ -70,6 +70,7 @@ CONFIG_IPV6=y
 CONFIG_IP_SCTP=m
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
 CONFIG_MTD=y
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_CHAR=y

arch/powerpc/configs/corenet64_smp_defconfig

@@ -27,6 +27,8 @@ CONFIG_P5040_DS=y
 CONFIG_T4240_QDS=y
 # CONFIG_PPC_OF_BOOT_TRAMPOLINE is not set
 CONFIG_BINFMT_MISC=m
+CONFIG_MATH_EMULATION=y
+CONFIG_MATH_EMULATION_HW_UNIMPLEMENTED=y
 CONFIG_FSL_IFC=y
 CONFIG_PCIEPORTBUS=y
 CONFIG_PCI_MSI=y
@@ -59,6 +61,7 @@ CONFIG_IPV6=y
 CONFIG_IP_SCTP=m
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
 CONFIG_MTD=y
 CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_OF_PARTS=y

arch/powerpc/configs/mpc83xx_defconfig

@@ -42,6 +42,7 @@ CONFIG_INET_ESP=y
 # CONFIG_IPV6 is not set
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
 # CONFIG_FW_LOADER is not set
 CONFIG_MTD=y
 CONFIG_MTD_CHAR=y

arch/powerpc/configs/mpc85xx_defconfig

@@ -27,6 +27,7 @@ CONFIG_MPC85xx_MDS=y
 CONFIG_MPC8536_DS=y
 CONFIG_MPC85xx_DS=y
 CONFIG_MPC85xx_RDB=y
+CONFIG_C293_PCIE=y
 CONFIG_P1010_RDB=y
 CONFIG_P1022_DS=y
 CONFIG_P1022_RDK=y
@@ -78,6 +79,7 @@ CONFIG_IPV6=y
 CONFIG_IP_SCTP=m
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
 CONFIG_MTD=y
 CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_OF_PARTS=y

arch/powerpc/configs/mpc85xx_smp_defconfig

@@ -30,6 +30,7 @@ CONFIG_MPC85xx_MDS=y
 CONFIG_MPC8536_DS=y
 CONFIG_MPC85xx_DS=y
 CONFIG_MPC85xx_RDB=y
+CONFIG_C293_PCIE=y
 CONFIG_P1010_RDB=y
 CONFIG_P1022_DS=y
 CONFIG_P1022_RDK=y
@@ -81,6 +82,7 @@ CONFIG_IPV6=y
 CONFIG_IP_SCTP=m
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
 CONFIG_MTD=y
 CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_OF_PARTS=y

arch/powerpc/include/asm/asm-compat.h

@@ -32,6 +32,15 @@
 #define PPC_MTOCRF(FXM, RS) MTOCRF((FXM), RS)
 #define PPC_LR_STKOFF	16
 #define PPC_MIN_STKFRM	112
+
+#ifdef __BIG_ENDIAN__
+#define LDX_BE	stringify_in_c(ldx)
+#define STDX_BE	stringify_in_c(stdx)
+#else
+#define LDX_BE	stringify_in_c(ldbrx)
+#define STDX_BE	stringify_in_c(stdbrx)
+#endif
+
 #else /* 32-bit */
 
 /* operations for longs and pointers */

arch/powerpc/include/asm/btext.h

@@ -13,6 +13,7 @@ extern void btext_update_display(unsigned long phys, int width, int height,
 extern void btext_setup_display(int width, int height, int depth, int pitch,
 				unsigned long address);
 extern void btext_prepare_BAT(void);
+extern void btext_map(void);
 extern void btext_unmap(void);
 
 extern void btext_drawchar(char c);

arch/powerpc/include/asm/cacheflush.h

@@ -32,13 +32,7 @@ extern void flush_dcache_page(struct page *page);
 
 extern void __flush_disable_L1(void);
 
-extern void __flush_icache_range(unsigned long, unsigned long);
-static inline void flush_icache_range(unsigned long start, unsigned long stop)
-{
-	if (!cpu_has_feature(CPU_FTR_COHERENT_ICACHE))
-		__flush_icache_range(start, stop);
-}
-
+extern void flush_icache_range(unsigned long, unsigned long);
 extern void flush_icache_user_range(struct vm_area_struct *vma,
 				    struct page *page, unsigned long addr,
 				    int len);

arch/powerpc/include/asm/cputable.h

@@ -371,14 +371,19 @@ extern const char *powerpc_base_platform;
 #define CPU_FTRS_E500MC	(CPU_FTR_USE_TB | CPU_FTR_NODSISRALIGN | \
 	    CPU_FTR_L2CSR | CPU_FTR_LWSYNC | CPU_FTR_NOEXECUTE | \
 	    CPU_FTR_DBELL | CPU_FTR_DEBUG_LVL_EXC | CPU_FTR_EMB_HV)
+/*
+ * e5500/e6500 erratum A-006958 is a timebase bug that can use the
+ * same workaround as CPU_FTR_CELL_TB_BUG.
+ */
 #define CPU_FTRS_E5500	(CPU_FTR_USE_TB | CPU_FTR_NODSISRALIGN | \
 	    CPU_FTR_L2CSR | CPU_FTR_LWSYNC | CPU_FTR_NOEXECUTE | \
 	    CPU_FTR_DBELL | CPU_FTR_POPCNTB | CPU_FTR_POPCNTD | \
-	    CPU_FTR_DEBUG_LVL_EXC | CPU_FTR_EMB_HV)
+	    CPU_FTR_DEBUG_LVL_EXC | CPU_FTR_EMB_HV | CPU_FTR_CELL_TB_BUG)
 #define CPU_FTRS_E6500	(CPU_FTR_USE_TB | CPU_FTR_NODSISRALIGN | \
 	    CPU_FTR_L2CSR | CPU_FTR_LWSYNC | CPU_FTR_NOEXECUTE | \
 	    CPU_FTR_DBELL | CPU_FTR_POPCNTB | CPU_FTR_POPCNTD | \
-	    CPU_FTR_DEBUG_LVL_EXC | CPU_FTR_EMB_HV | CPU_FTR_ALTIVEC_COMP)
+	    CPU_FTR_DEBUG_LVL_EXC | CPU_FTR_EMB_HV | CPU_FTR_ALTIVEC_COMP | \
+	    CPU_FTR_CELL_TB_BUG)
 #define CPU_FTRS_GENERIC_32	(CPU_FTR_COMMON | CPU_FTR_NODSISRALIGN)
 
 /* 64-bit CPUs */

arch/powerpc/include/asm/emulated_ops.h

@@ -46,8 +46,6 @@ extern struct ppc_emulated {
 	struct ppc_emulated_entry unaligned;
 #ifdef CONFIG_MATH_EMULATION
 	struct ppc_emulated_entry math;
-#elif defined(CONFIG_8XX_MINIMAL_FPEMU)
-	struct ppc_emulated_entry 8xx;
 #endif
 #ifdef CONFIG_VSX
 	struct ppc_emulated_entry vsx;

arch/powerpc/include/asm/epapr_hcalls.h

@@ -105,6 +105,12 @@
 extern bool epapr_paravirt_enabled;
 extern u32 epapr_hypercall_start[];
 
+#ifdef CONFIG_EPAPR_PARAVIRT
+int __init epapr_paravirt_early_init(void);
+#else
+static inline int epapr_paravirt_early_init(void) { return 0; }
+#endif
+
 /*
  * We use "uintptr_t" to define a register because it's guaranteed to be a
  * 32-bit integer on a 32-bit platform, and a 64-bit integer on a 64-bit

arch/powerpc/include/asm/exception-64s.h

@@ -48,17 +48,18 @@
 #define EX_LR		72
 #define EX_CFAR		80
 #define EX_PPR		88	/* SMT thread status register (priority) */
+#define EX_CTR		96
 
 #ifdef CONFIG_RELOCATABLE
 #define __EXCEPTION_RELON_PROLOG_PSERIES_1(label, h)			\
 	ld	r12,PACAKBASE(r13);	/* get high part of &label */	\
 	mfspr	r11,SPRN_##h##SRR0;	/* save SRR0 */			\
 	LOAD_HANDLER(r12,label);					\
-	mtlr	r12;							\
+	mtctr	r12;							\
 	mfspr	r12,SPRN_##h##SRR1;	/* and SRR1 */			\
 	li	r10,MSR_RI;						\
 	mtmsrd 	r10,1;			/* Set RI (EE=0) */		\
-	blr;
+	bctr;
 #else
 /* If not relocatable, we can jump directly -- and save messing with LR */
 #define __EXCEPTION_RELON_PROLOG_PSERIES_1(label, h)			\
@@ -97,18 +98,18 @@
 
 #if defined(CONFIG_RELOCATABLE)
 /*
- * If we support interrupts with relocation on AND we're a relocatable
- * kernel, we need to use LR to get to the 2nd level handler.  So, save/restore
- * it when required.
+ * If we support interrupts with relocation on AND we're a relocatable kernel,
+ * we need to use CTR to get to the 2nd level handler.  So, save/restore it
+ * when required.
  */
-#define SAVE_LR(reg, area)	mflr	reg ; 	std	reg,area+EX_LR(r13)
-#define GET_LR(reg, area) 			ld	reg,area+EX_LR(r13)
-#define RESTORE_LR(reg, area)	ld	reg,area+EX_LR(r13) ; mtlr reg
+#define SAVE_CTR(reg, area)	mfctr	reg ; 	std	reg,area+EX_CTR(r13)
+#define GET_CTR(reg, area) 			ld	reg,area+EX_CTR(r13)
+#define RESTORE_CTR(reg, area)	ld	reg,area+EX_CTR(r13) ; mtctr reg
 #else
-/* ...else LR is unused and in register. */
-#define SAVE_LR(reg, area)
-#define GET_LR(reg, area) 	mflr	reg
-#define RESTORE_LR(reg, area)
+/* ...else CTR is unused and in register. */
+#define SAVE_CTR(reg, area)
+#define GET_CTR(reg, area) 	mfctr	reg
+#define RESTORE_CTR(reg, area)
 #endif
 
 /*
@@ -164,7 +165,7 @@ END_FTR_SECTION_NESTED(ftr,ftr,943)
 #define __EXCEPTION_PROLOG_1(area, extra, vec)				\
 	OPT_SAVE_REG_TO_PACA(area+EX_PPR, r9, CPU_FTR_HAS_PPR);		\
 	OPT_SAVE_REG_TO_PACA(area+EX_CFAR, r10, CPU_FTR_CFAR);		\
-	SAVE_LR(r10, area);						\
+	SAVE_CTR(r10, area);						\
 	mfcr	r9;							\
 	extra(vec);							\
 	std	r11,area+EX_R11(r13);					\
@@ -270,7 +271,7 @@ do_kvm_##n:								\
 	sth	r1,PACA_TRAP_SAVE(r13);					   \
 	std	r3,area+EX_R3(r13);					   \
 	addi	r3,r13,area;		/* r3 -> where regs are saved*/	   \
-	RESTORE_LR(r1, area);						   \
+	RESTORE_CTR(r1, area);						   \
 	b	bad_stack;						   \
 3:	std	r9,_CCR(r1);		/* save CR in stackframe	*/ \
 	std	r11,_NIP(r1);		/* save SRR0 in stackframe	*/ \
@@ -298,10 +299,10 @@ do_kvm_##n:								\
 	ld	r10,area+EX_CFAR(r13);					   \
 	std	r10,ORIG_GPR3(r1);					   \
 	END_FTR_SECTION_NESTED(CPU_FTR_CFAR, CPU_FTR_CFAR, 66);		   \
-	GET_LR(r9,area);		/* Get LR, later save to stack	*/ \
+	mflr	r9;			/* Get LR, later save to stack	*/ \
 	ld	r2,PACATOC(r13);	/* get kernel TOC into r2	*/ \
 	std	r9,_LINK(r1);						   \
-	mfctr	r10;			/* save CTR in stackframe	*/ \
+	GET_CTR(r10, area);						   \
 	std	r10,_CTR(r1);						   \
 	lbz	r10,PACASOFTIRQEN(r13);				   \
 	mfspr	r11,SPRN_XER;		/* save XER in stackframe	*/ \
@@ -479,7 +480,7 @@ label##_relon_hv:							\
  */
 
 /* Exception addition: Hard disable interrupts */
-#define DISABLE_INTS	SOFT_DISABLE_INTS(r10,r11)
+#define DISABLE_INTS	RECONCILE_IRQ_STATE(r10,r11)
 
 #define ADD_NVGPRS				\
 	bl	.save_nvgprs

arch/powerpc/include/asm/io.h

@@ -69,8 +69,18 @@ extern unsigned long pci_dram_offset;
 
 extern resource_size_t isa_mem_base;
 
-#if defined(CONFIG_PPC32) && defined(CONFIG_PPC_INDIRECT_IO)
-#error CONFIG_PPC_INDIRECT_IO is not yet supported on 32 bits
+/* Boolean set by platform if PIO accesses are suppored while _IO_BASE
+ * is not set or addresses cannot be translated to MMIO. This is typically
+ * set when the platform supports "special" PIO accesses via a non memory
+ * mapped mechanism, and allows things like the early udbg UART code to
+ * function.
+ */
+extern bool isa_io_special;
+
+#ifdef CONFIG_PPC32
+#if defined(CONFIG_PPC_INDIRECT_PIO) || defined(CONFIG_PPC_INDIRECT_MMIO)
+#error CONFIG_PPC_INDIRECT_{PIO,MMIO} are not yet supported on 32 bits
+#endif
 #endif
 
 /*
@@ -222,9 +232,9 @@ extern void _memcpy_toio(volatile void __iomem *dest, const void *src,
  * for PowerPC is as close as possible to the x86 version of these, and thus
  * provides fairly heavy weight barriers for the non-raw versions
  *
- * In addition, they support a hook mechanism when CONFIG_PPC_INDIRECT_IO
- * allowing the platform to provide its own implementation of some or all
- * of the accessors.
+ * In addition, they support a hook mechanism when CONFIG_PPC_INDIRECT_MMIO
+ * or CONFIG_PPC_INDIRECT_PIO are set allowing the platform to provide its
+ * own implementation of some or all of the accessors.
  */
 
 /*
@@ -240,8 +250,8 @@ extern void _memcpy_toio(volatile void __iomem *dest, const void *src,
 
 /* Indirect IO address tokens:
  *
- * When CONFIG_PPC_INDIRECT_IO is set, the platform can provide hooks
- * on all IOs. (Note that this is all 64 bits only for now)
+ * When CONFIG_PPC_INDIRECT_MMIO is set, the platform can provide hooks
+ * on all MMIOs. (Note that this is all 64 bits only for now)
  *
  * To help platforms who may need to differenciate MMIO addresses in
  * their hooks, a bitfield is reserved for use by the platform near the
@@ -263,11 +273,14 @@ extern void _memcpy_toio(volatile void __iomem *dest, const void *src,
  *
  * The direct IO mapping operations will then mask off those bits
  * before doing the actual access, though that only happen when
- * CONFIG_PPC_INDIRECT_IO is set, thus be careful when you use that
+ * CONFIG_PPC_INDIRECT_MMIO is set, thus be careful when you use that
  * mechanism
+ *
+ * For PIO, there is a separate CONFIG_PPC_INDIRECT_PIO which makes
+ * all PIO functions call through a hook.
  */
 
-#ifdef CONFIG_PPC_INDIRECT_IO
+#ifdef CONFIG_PPC_INDIRECT_MMIO
 #define PCI_IO_IND_TOKEN_MASK	0x0fff000000000000ul
 #define PCI_IO_IND_TOKEN_SHIFT	48
 #define PCI_FIX_ADDR(addr)						\
@@ -672,7 +685,7 @@ extern void __iomem * __ioremap_at(phys_addr_t pa, void *ea,
 extern void __iounmap_at(void *ea, unsigned long size);
 
 /*
- * When CONFIG_PPC_INDIRECT_IO is set, we use the generic iomap implementation
+ * When CONFIG_PPC_INDIRECT_PIO is set, we use the generic iomap implementation
  * which needs some additional definitions here. They basically allow PIO
  * space overall to be 1GB. This will work as long as we never try to use
  * iomap to map MMIO below 1GB which should be fine on ppc64

arch/powerpc/include/asm/irqflags.h

@@ -40,9 +40,10 @@
 #define TRACE_DISABLE_INTS	TRACE_WITH_FRAME_BUFFER(.trace_hardirqs_off)
 
 /*
- * This is used by assembly code to soft-disable interrupts
+ * This is used by assembly code to soft-disable interrupts first and
+ * reconcile irq state.
  */
-#define SOFT_DISABLE_INTS(__rA, __rB)		\
+#define RECONCILE_IRQ_STATE(__rA, __rB)		\
 	lbz	__rA,PACASOFTIRQEN(r13);	\
 	lbz	__rB,PACAIRQHAPPENED(r13);	\
 	cmpwi	cr0,__rA,0;			\
@@ -58,7 +59,7 @@
 #define TRACE_ENABLE_INTS
 #define TRACE_DISABLE_INTS
 
-#define SOFT_DISABLE_INTS(__rA, __rB)		\
+#define RECONCILE_IRQ_STATE(__rA, __rB)		\
 	lbz	__rA,PACAIRQHAPPENED(r13);	\
 	li	__rB,0;				\
 	ori	__rA,__rA,PACA_IRQ_HARD_DIS;	\

arch/powerpc/include/asm/lppaca.h

@@ -48,15 +48,13 @@
 struct lppaca {
 	/* cacheline 1 contains read-only data */
 
-	u32	desc;			/* Eye catcher 0xD397D781 */
-	u16	size;			/* Size of this struct */
-	u16	reserved1;
-	u16	reserved2:14;
-	u8	shared_proc:1;		/* Shared processor indicator */
-	u8	secondary_thread:1;	/* Secondary thread indicator */
+	__be32	desc;			/* Eye catcher 0xD397D781 */
+	__be16	size;			/* Size of this struct */
+	u8	reserved1[3];
+	u8	__old_status;		/* Old status, including shared proc */
 	u8	reserved3[14];
-	volatile u32 dyn_hw_node_id;	/* Dynamic hardware node id */
-	volatile u32 dyn_hw_proc_id;	/* Dynamic hardware proc id */
+	volatile __be32 dyn_hw_node_id;	/* Dynamic hardware node id */
+	volatile __be32 dyn_hw_proc_id;	/* Dynamic hardware proc id */
 	u8	reserved4[56];
 	volatile u8 vphn_assoc_counts[8]; /* Virtual processor home node */
 					  /* associativity change counters */
@@ -73,9 +71,9 @@ struct lppaca {
 	u8	fpregs_in_use;
 	u8	pmcregs_in_use;
 	u8	reserved8[28];
-	u64	wait_state_cycles;	/* Wait cycles for this proc */
+	__be64	wait_state_cycles;	/* Wait cycles for this proc */
 	u8	reserved9[28];
-	u16	slb_count;		/* # of SLBs to maintain */
+	__be16	slb_count;		/* # of SLBs to maintain */
 	u8	idle;			/* Indicate OS is idle */
 	u8	vmxregs_in_use;
 
@@ -89,17 +87,17 @@ struct lppaca {
 	 * NOTE: This value will ALWAYS be zero for dedicated processors and
 	 * will NEVER be zero for shared processors (ie, initialized to a 1).
 	 */
-	volatile u32 yield_count;
-	volatile u32 dispersion_count;	/* dispatch changed physical cpu */
-	volatile u64 cmo_faults;	/* CMO page fault count */
-	volatile u64 cmo_fault_time;	/* CMO page fault time */
+	volatile __be32 yield_count;
+	volatile __be32 dispersion_count; /* dispatch changed physical cpu */
+	volatile __be64 cmo_faults;	/* CMO page fault count */
+	volatile __be64 cmo_fault_time;	/* CMO page fault time */
 	u8	reserved10[104];
 
 	/* cacheline 4-5 */
 
-	u32	page_ins;		/* CMO Hint - # page ins by OS */
+	__be32	page_ins;		/* CMO Hint - # page ins by OS */
 	u8	reserved11[148];
-	volatile u64 dtl_idx;		/* Dispatch Trace Log head index */
+	volatile __be64 dtl_idx;		/* Dispatch Trace Log head index */
 	u8	reserved12[96];
 } __attribute__((__aligned__(0x400)));
 
@@ -107,18 +105,30 @@ extern struct lppaca lppaca[];
 
 #define lppaca_of(cpu)	(*paca[cpu].lppaca_ptr)
 
+/*
+ * Old kernels used a reserved bit in the VPA to determine if it was running
+ * in shared processor mode. New kernels look for a non zero yield count
+ * but KVM still needs to set the bit to keep the old stuff happy.
+ */
+#define LPPACA_OLD_SHARED_PROC		2
+
+static inline bool lppaca_shared_proc(struct lppaca *l)
+{
+	return l->yield_count != 0;
+}
+
 /*
  * SLB shadow buffer structure as defined in the PAPR.  The save_area
  * contains adjacent ESID and VSID pairs for each shadowed SLB.  The
  * ESID is stored in the lower 64bits, then the VSID.
  */
 struct slb_shadow {
-	u32	persistent;		/* Number of persistent SLBs */
-	u32	buffer_length;		/* Total shadow buffer length */
-	u64	reserved;
+	__be32	persistent;		/* Number of persistent SLBs */
+	__be32	buffer_length;		/* Total shadow buffer length */
+	__be64	reserved;
 	struct	{
-		u64     esid;
-		u64	vsid;
+		__be64     esid;
+		__be64	vsid;
 	} save_area[SLB_NUM_BOLTED];
 } ____cacheline_aligned;
 
@@ -130,14 +140,14 @@ extern struct slb_shadow slb_shadow[];
 struct dtl_entry {
 	u8	dispatch_reason;
 	u8	preempt_reason;
-	u16	processor_id;
-	u32	enqueue_to_dispatch_time;
-	u32	ready_to_enqueue_time;
-	u32	waiting_to_ready_time;
-	u64	timebase;
-	u64	fault_addr;
-	u64	srr0;
-	u64	srr1;
+	__be16	processor_id;
+	__be32	enqueue_to_dispatch_time;
+	__be32	ready_to_enqueue_time;
+	__be32	waiting_to_ready_time;
+	__be64	timebase;
+	__be64	fault_addr;
+	__be64	srr0;
+	__be64	srr1;
 };
 
 #define DISPATCH_LOG_BYTES	4096	/* bytes per cpu */

arch/powerpc/include/asm/mpc5121.h

@@ -32,25 +32,11 @@ struct mpc512x_ccm {
 	u32	scfr2;	/* System Clock Frequency Register 2 */
 	u32	scfr2s;	/* System Clock Frequency Shadow Register 2 */
 	u32	bcr;	/* Bread Crumb Register */
-	u32	p0ccr;	/* PSC0 Clock Control Register */
-	u32	p1ccr;	/* PSC1 CCR */
-	u32	p2ccr;	/* PSC2 CCR */
-	u32	p3ccr;	/* PSC3 CCR */
-	u32	p4ccr;	/* PSC4 CCR */
-	u32	p5ccr;	/* PSC5 CCR */
-	u32	p6ccr;	/* PSC6 CCR */
-	u32	p7ccr;	/* PSC7 CCR */
-	u32	p8ccr;	/* PSC8 CCR */
-	u32	p9ccr;	/* PSC9 CCR */
-	u32	p10ccr;	/* PSC10 CCR */
-	u32	p11ccr;	/* PSC11 CCR */
+	u32	psc_ccr[12];	/* PSC Clock Control Registers */
 	u32	spccr;	/* SPDIF Clock Control Register */
 	u32	cccr;	/* CFM Clock Control Register */
 	u32	dccr;	/* DIU Clock Control Register */
-	u32	m1ccr;	/* MSCAN1 CCR */
-	u32	m2ccr;	/* MSCAN2 CCR */
-	u32	m3ccr;	/* MSCAN3 CCR */
-	u32	m4ccr;	/* MSCAN4 CCR */
+	u32	mscan_ccr[4];	/* MSCAN Clock Control Registers */
 	u8	res[0x98]; /* Reserved */
 };
 

arch/powerpc/include/asm/mpc85xx.h

+/*
+ * MPC85xx cpu type detection
+ *
+ * Copyright 2011-2012 Freescale Semiconductor, Inc.
+ *
+ * This is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __ASM_PPC_MPC85XX_H
+#define __ASM_PPC_MPC85XX_H
+
+#define SVR_REV(svr)	((svr) & 0xFF)		/* SOC design resision */
+#define SVR_MAJ(svr)	(((svr) >>  4) & 0xF)	/* Major revision field*/
+#define SVR_MIN(svr)	(((svr) >>  0) & 0xF)	/* Minor revision field*/
+
+/* Some parts define SVR[0:23] as the SOC version */
+#define SVR_SOC_VER(svr) (((svr) >> 8) & 0xFFF7FF)	/* SOC Version fields */
+
+#define SVR_8533	0x803400
+#define SVR_8535	0x803701
+#define SVR_8536	0x803700
+#define SVR_8540	0x803000
+#define SVR_8541	0x807200
+#define SVR_8543	0x803200
+#define SVR_8544	0x803401
+#define SVR_8545	0x803102
+#define SVR_8547	0x803101
+#define SVR_8548	0x803100
+#define SVR_8555	0x807100
+#define SVR_8560	0x807000
+#define SVR_8567	0x807501
+#define SVR_8568	0x807500
+#define SVR_8569	0x808000
+#define SVR_8572	0x80E000
+#define SVR_P1010	0x80F100
+#define SVR_P1011	0x80E500
+#define SVR_P1012	0x80E501
+#define SVR_P1013	0x80E700
+#define SVR_P1014	0x80F101
+#define SVR_P1017	0x80F700
+#define SVR_P1020	0x80E400
+#define SVR_P1021	0x80E401
+#define SVR_P1022	0x80E600
+#define SVR_P1023	0x80F600
+#define SVR_P1024	0x80E402
+#define SVR_P1025	0x80E403
+#define SVR_P2010	0x80E300
+#define SVR_P2020	0x80E200
+#define SVR_P2040	0x821000
+#define SVR_P2041	0x821001
+#define SVR_P3041	0x821103
+#define SVR_P4040	0x820100
+#define SVR_P4080	0x820000
+#define SVR_P5010	0x822100
+#define SVR_P5020	0x822000
+#define SVR_P5021	0X820500
+#define SVR_P5040	0x820400
+#define SVR_T4240	0x824000
+#define SVR_T4120	0x824001
+#define SVR_T4160	0x824100
+#define SVR_C291	0x850000
+#define SVR_C292	0x850020
+#define SVR_C293	0x850030
+#define SVR_B4860	0X868000
+#define SVR_G4860	0x868001
+#define SVR_G4060	0x868003
+#define SVR_B4440	0x868100
+#define SVR_G4440	0x868101
+#define SVR_B4420	0x868102
+#define SVR_B4220	0x868103
+#define SVR_T1040	0x852000
+#define SVR_T1041	0x852001
+#define SVR_T1042	0x852002
+#define SVR_T1020	0x852100
+#define SVR_T1021	0x852101
+#define SVR_T1022	0x852102
+
+#define SVR_8610	0x80A000
+#define SVR_8641	0x809000
+#define SVR_8641D	0x809001
+
+#define SVR_9130	0x860001
+#define SVR_9131	0x860000
+#define SVR_9132	0x861000
+#define SVR_9232	0x861400
+
+#define SVR_Unknown	0xFFFFFF
+
+#endif

arch/powerpc/include/asm/mpic.h

@@ -396,7 +396,14 @@ extern struct bus_type mpic_subsys;
 #define	MPIC_REGSET_TSI108		MPIC_REGSET(1)	/* Tsi108/109 PIC */
 
 /* Get the version of primary MPIC */
+#ifdef CONFIG_MPIC
 extern u32 fsl_mpic_primary_get_version(void);
+#else
+static inline u32 fsl_mpic_primary_get_version(void)
+{
+	return 0;
+}
+#endif
 
 /* Allocate the controller structure and setup the linux irq descs
  * for the range if interrupts passed in. No HW initialization is

arch/powerpc/include/asm/opal.h

@@ -124,6 +124,11 @@ extern int opal_enter_rtas(struct rtas_args *args,
 #define OPAL_PCI_POLL				62
 #define OPAL_PCI_MSI_EOI			63
 #define OPAL_PCI_GET_PHB_DIAG_DATA2		64
+#define OPAL_XSCOM_READ				65
+#define OPAL_XSCOM_WRITE			66
+#define OPAL_LPC_READ				67
+#define OPAL_LPC_WRITE				68
+#define OPAL_RETURN_CPU				69
 
 #ifndef __ASSEMBLY__
 
@@ -337,6 +342,17 @@ enum OpalEpowStatus {
 	OPAL_EPOW_OVER_INTERNAL_TEMP = 3
 };
 
+/*
+ * Address cycle types for LPC accesses. These also correspond
+ * to the content of the first cell of the "reg" property for
+ * device nodes on the LPC bus
+ */
+enum OpalLPCAddressType {
+	OPAL_LPC_MEM	= 0,
+	OPAL_LPC_IO	= 1,
+	OPAL_LPC_FW	= 2,
+};
+
 struct opal_machine_check_event {
 	enum OpalMCE_Version	version:8;	/* 0x00 */
 	uint8_t			in_use;		/* 0x01 */
@@ -631,6 +647,15 @@ int64_t opal_set_system_attention_led(uint8_t led_action);
 int64_t opal_pci_next_error(uint64_t phb_id, uint64_t *first_frozen_pe,
 			    uint16_t *pci_error_type, uint16_t *severity);
 int64_t opal_pci_poll(uint64_t phb_id);
+int64_t opal_return_cpu(void);
+
+int64_t opal_xscom_read(uint32_t gcid, uint32_t pcb_addr, uint64_t *val);
+int64_t opal_xscom_write(uint32_t gcid, uint32_t pcb_addr, uint64_t val);
+
+int64_t opal_lpc_write(uint32_t chip_id, enum OpalLPCAddressType addr_type,
+		       uint32_t addr, uint32_t data, uint32_t sz);
+int64_t opal_lpc_read(uint32_t chip_id, enum OpalLPCAddressType addr_type,
+		      uint32_t addr, uint32_t *data, uint32_t sz);
 
 /* Internal functions */
 extern int early_init_dt_scan_opal(unsigned long node, const char *uname, int depth, void *data);
@@ -664,6 +689,8 @@ extern int opal_machine_check(struct pt_regs *regs);
 
 extern void opal_shutdown(void);
 
+extern void opal_lpc_init(void);
+
 #endif /* __ASSEMBLY__ */
 
 #endif /* __OPAL_H */

arch/powerpc/include/asm/paca.h

@@ -68,8 +68,13 @@ struct paca_struct {
 	 * instruction.  They must travel together and be properly
 	 * aligned.
 	 */
+#ifdef __BIG_ENDIAN__
 	u16 lock_token;			/* Constant 0x8000, used in locks */
 	u16 paca_index;			/* Logical processor number */
+#else
+	u16 paca_index;			/* Logical processor number */
+	u16 lock_token;			/* Constant 0x8000, used in locks */
+#endif
 
 	u64 kernel_toc;			/* Kernel TOC address */
 	u64 kernelbase;			/* Base address of kernel */
@@ -93,9 +98,9 @@ struct paca_struct {
 	 * Now, starting in cacheline 2, the exception save areas
 	 */
 	/* used for most interrupts/exceptions */
-	u64 exgen[12] __attribute__((aligned(0x80)));
-	u64 exmc[12];		/* used for machine checks */
-	u64 exslb[12];		/* used for SLB/segment table misses
+	u64 exgen[13] __attribute__((aligned(0x80)));
+	u64 exmc[13];		/* used for machine checks */
+	u64 exslb[13];		/* used for SLB/segment table misses
  				 * on the linear mapping */
 	/* SLB related definitions */
 	u16 vmalloc_sllp;

arch/powerpc/include/asm/pci-bridge.h

@@ -159,7 +159,7 @@ struct pci_dn {
 
 	int	pci_ext_config_space;	/* for pci devices */
 
-	int	force_32bit_msi:1;
+	bool	force_32bit_msi;
 
 	struct	pci_dev *pcidev;	/* back-pointer to the pci device */
 #ifdef CONFIG_EEH

arch/powerpc/include/asm/perf_event_fsl_emb.h

@@ -13,7 +13,7 @@
 #include <linux/types.h>
 #include <asm/hw_irq.h>
 
-#define MAX_HWEVENTS 4
+#define MAX_HWEVENTS 6
 
 /* event flags */
 #define FSL_EMB_EVENT_VALID      1

arch/powerpc/platforms/pseries/plpar_wrappers.h → arch/powerpc/include/asm/plpar_wrappers.h

-#ifndef _PSERIES_PLPAR_WRAPPERS_H
-#define _PSERIES_PLPAR_WRAPPERS_H
+#ifndef _ASM_POWERPC_PLPAR_WRAPPERS_H
+#define _ASM_POWERPC_PLPAR_WRAPPERS_H
 
 #include <linux/string.h>
 #include <linux/irqflags.h>
@@ -256,30 +256,6 @@ static inline long plpar_tce_stuff(unsigned long liobn, unsigned long ioba,
 	return plpar_hcall_norets(H_STUFF_TCE, liobn, ioba, tceval, count);
 }
 
-static inline long plpar_get_term_char(unsigned long termno,
-		unsigned long *len_ret, char *buf_ret)
-{
-	long rc;
-	unsigned long retbuf[PLPAR_HCALL_BUFSIZE];
-	unsigned long *lbuf = (unsigned long *)buf_ret;	/* TODO: alignment? */
-
-	rc = plpar_hcall(H_GET_TERM_CHAR, retbuf, termno);
-
-	*len_ret = retbuf[0];
-	lbuf[0] = retbuf[1];
-	lbuf[1] = retbuf[2];
-
-	return rc;
-}
-
-static inline long plpar_put_term_char(unsigned long termno, unsigned long len,
-		const char *buffer)
-{
-	unsigned long *lbuf = (unsigned long *)buffer;	/* TODO: alignment? */
-	return plpar_hcall_norets(H_PUT_TERM_CHAR, termno, len, lbuf[0],
-			lbuf[1]);
-}
-
 /* Set various resource mode parameters */
 static inline long plpar_set_mode(unsigned long mflags, unsigned long resource,
 		unsigned long value1, unsigned long value2)
@@ -321,4 +297,4 @@ static inline long plapr_set_watchpoint0(unsigned long dawr0, unsigned long dawr
 	return plpar_set_mode(0, 2, dawr0, dawrx0);
 }
 
-#endif /* _PSERIES_PLPAR_WRAPPERS_H */
+#endif /* _ASM_POWERPC_PLPAR_WRAPPERS_H */

arch/powerpc/include/asm/ppc-opcode.h

@@ -81,6 +81,53 @@
 #define	__REGA0_R30	30
 #define	__REGA0_R31	31
 
+/* opcode and xopcode for instructions */
+#define OP_TRAP 3
+#define OP_TRAP_64 2
+
+#define OP_31_XOP_TRAP      4
+#define OP_31_XOP_LWZX      23
+#define OP_31_XOP_DCBST     54
+#define OP_31_XOP_LWZUX     55
+#define OP_31_XOP_TRAP_64   68
+#define OP_31_XOP_DCBF      86
+#define OP_31_XOP_LBZX      87
+#define OP_31_XOP_STWX      151
+#define OP_31_XOP_STBX      215
+#define OP_31_XOP_LBZUX     119
+#define OP_31_XOP_STBUX     247
+#define OP_31_XOP_LHZX      279
+#define OP_31_XOP_LHZUX     311
+#define OP_31_XOP_MFSPR     339
+#define OP_31_XOP_LHAX      343
+#define OP_31_XOP_LHAUX     375
+#define OP_31_XOP_STHX      407
+#define OP_31_XOP_STHUX     439
+#define OP_31_XOP_MTSPR     467
+#define OP_31_XOP_DCBI      470
+#define OP_31_XOP_LWBRX     534
+#define OP_31_XOP_TLBSYNC   566
+#define OP_31_XOP_STWBRX    662
+#define OP_31_XOP_LHBRX     790
+#define OP_31_XOP_STHBRX    918
+
+#define OP_LWZ  32
+#define OP_LD   58
+#define OP_LWZU 33
+#define OP_LBZ  34
+#define OP_LBZU 35
+#define OP_STW  36
+#define OP_STWU 37
+#define OP_STD  62
+#define OP_STB  38
+#define OP_STBU 39
+#define OP_LHZ  40
+#define OP_LHZU 41
+#define OP_LHA  42
+#define OP_LHAU 43
+#define OP_STH  44
+#define OP_STHU 45
+
 /* sorted alphabetically */
 #define PPC_INST_BHRBE			0x7c00025c
 #define PPC_INST_CLRBHRB		0x7c00035c

arch/powerpc/include/asm/ppc_asm.h

@@ -54,7 +54,8 @@ BEGIN_FW_FTR_SECTION;							\
 	/* from user - see if there are any DTL entries to process */	\
 	ld	r10,PACALPPACAPTR(r13);	/* get ptr to VPA */		\
 	ld	r11,PACA_DTL_RIDX(r13);	/* get log read index */	\
-	ld	r10,LPPACA_DTLIDX(r10);	/* get log write index */	\
+	addi	r10,r10,LPPACA_DTLIDX;					\
+	LDX_BE	r10,0,r10;		/* get log write index */	\
 	cmpd	cr1,r11,r10;						\
 	beq+	cr1,33f;						\
 	bl	.accumulate_stolen_time;				\
@@ -219,19 +220,6 @@ END_FW_FTR_SECTION_IFSET(FW_FEATURE_SPLPAR)
 #define REST_8VSRS(n,b,base)	REST_4VSRS(n,b,base); REST_4VSRS(n+4,b,base)
 #define REST_16VSRS(n,b,base)	REST_8VSRS(n,b,base); REST_8VSRS(n+8,b,base)
 #define REST_32VSRS(n,b,base)	REST_16VSRS(n,b,base); REST_16VSRS(n+16,b,base)
-/* Save the upper 32 VSRs (32-63) in the thread VSX region (0-31) */
-#define SAVE_VSRU(n,b,base)	li b,THREAD_VR0+(16*(n));  STXVD2X(n+32,R##base,R##b)
-#define SAVE_2VSRSU(n,b,base)	SAVE_VSRU(n,b,base); SAVE_VSRU(n+1,b,base)
-#define SAVE_4VSRSU(n,b,base)	SAVE_2VSRSU(n,b,base); SAVE_2VSRSU(n+2,b,base)
-#define SAVE_8VSRSU(n,b,base)	SAVE_4VSRSU(n,b,base); SAVE_4VSRSU(n+4,b,base)
-#define SAVE_16VSRSU(n,b,base)	SAVE_8VSRSU(n,b,base); SAVE_8VSRSU(n+8,b,base)
-#define SAVE_32VSRSU(n,b,base)	SAVE_16VSRSU(n,b,base); SAVE_16VSRSU(n+16,b,base)
-#define REST_VSRU(n,b,base)	li b,THREAD_VR0+(16*(n)); LXVD2X(n+32,R##base,R##b)
-#define REST_2VSRSU(n,b,base)	REST_VSRU(n,b,base); REST_VSRU(n+1,b,base)
-#define REST_4VSRSU(n,b,base)	REST_2VSRSU(n,b,base); REST_2VSRSU(n+2,b,base)
-#define REST_8VSRSU(n,b,base)	REST_4VSRSU(n,b,base); REST_4VSRSU(n+4,b,base)
-#define REST_16VSRSU(n,b,base)	REST_8VSRSU(n,b,base); REST_8VSRSU(n+8,b,base)
-#define REST_32VSRSU(n,b,base)	REST_16VSRSU(n,b,base); REST_16VSRSU(n+16,b,base)
 
 /*
  * b = base register for addressing, o = base offset from register of 1st EVR
@@ -443,15 +431,15 @@ END_FTR_SECTION_IFSET(CPU_FTR_601)
 #define ISYNC_601
 #endif
 
-#ifdef CONFIG_PPC_CELL
+#if defined(CONFIG_PPC_CELL) || defined(CONFIG_PPC_FSL_BOOK3E)
 #define MFTB(dest)			\
-90:	mftb  dest;			\
+90:	mfspr dest, SPRN_TBRL;		\
 BEGIN_FTR_SECTION_NESTED(96);		\
 	cmpwi dest,0;			\
 	beq-  90b;			\
 END_FTR_SECTION_NESTED(CPU_FTR_CELL_TB_BUG, CPU_FTR_CELL_TB_BUG, 96)
 #else
-#define MFTB(dest)			mftb dest
+#define MFTB(dest)			mfspr dest, SPRN_TBRL
 #endif
 
 #ifndef CONFIG_SMP

arch/powerpc/include/asm/prom.h

@@ -38,8 +38,9 @@ extern unsigned long pci_address_to_pio(phys_addr_t address);
 /* Parse the ibm,dma-window property of an OF node into the busno, phys and
  * size parameters.
  */
-void of_parse_dma_window(struct device_node *dn, const void *dma_window_prop,
-		unsigned long *busno, unsigned long *phys, unsigned long *size);
+void of_parse_dma_window(struct device_node *dn, const __be32 *dma_window,
+			 unsigned long *busno, unsigned long *phys,
+			 unsigned long *size);
 
 extern void kdump_move_device_tree(void);
 
@@ -55,6 +56,8 @@ static inline int of_node_to_nid(struct device_node *device) { return 0; }
 
 extern void of_instantiate_rtc(void);
 
+extern int of_get_ibm_chip_id(struct device_node *np);
+
 /* The of_drconf_cell struct defines the layout of the LMB array
  * specified in the device tree property
  * ibm,dynamic-reconfiguration-memory/ibm,dynamic-memory

arch/powerpc/include/asm/reg.h

@@ -115,10 +115,10 @@
 #define MSR_64BIT	MSR_SF
 
 /* Server variant */
-#define MSR_		MSR_ME | MSR_RI | MSR_IR | MSR_DR | MSR_ISF |MSR_HV
-#define MSR_KERNEL	MSR_ | MSR_64BIT
-#define MSR_USER32	MSR_ | MSR_PR | MSR_EE
-#define MSR_USER64	MSR_USER32 | MSR_64BIT
+#define MSR_		(MSR_ME | MSR_RI | MSR_IR | MSR_DR | MSR_ISF |MSR_HV)
+#define MSR_KERNEL	(MSR_ | MSR_64BIT)
+#define MSR_USER32	(MSR_ | MSR_PR | MSR_EE)
+#define MSR_USER64	(MSR_USER32 | MSR_64BIT)
 #elif defined(CONFIG_PPC_BOOK3S_32) || defined(CONFIG_8xx)
 /* Default MSR for kernel mode. */
 #define MSR_KERNEL	(MSR_ME|MSR_RI|MSR_IR|MSR_DR)
@@ -258,8 +258,8 @@
 #define FSCR_TAR_LG	8	/* Enable Target Address Register */
 #define FSCR_EBB_LG	7	/* Enable Event Based Branching */
 #define FSCR_TM_LG	5	/* Enable Transactional Memory */
-#define FSCR_PM_LG	4	/* Enable prob/priv access to PMU SPRs */
-#define FSCR_BHRB_LG	3	/* Enable Branch History Rolling Buffer*/
+#define FSCR_BHRB_LG	4	/* Enable Branch History Rolling Buffer*/
+#define FSCR_PM_LG	3	/* Enable prob/priv access to PMU SPRs */
 #define FSCR_DSCR_LG	2	/* Enable Data Stream Control Register */
 #define FSCR_VECVSX_LG	1	/* Enable VMX/VSX  */
 #define FSCR_FP_LG	0	/* Enable Floating Point */
@@ -1126,10 +1126,10 @@
 				     : "memory")
 
 #ifdef __powerpc64__
-#ifdef CONFIG_PPC_CELL
+#if defined(CONFIG_PPC_CELL) || defined(CONFIG_PPC_FSL_BOOK3E)
 #define mftb()		({unsigned long rval;				\
 			asm volatile(					\
-				"90:	mftb %0;\n"			\
+				"90:	mfspr %0, %2;\n"		\
 				"97:	cmpwi %0,0;\n"			\
 				"	beq- 90b;\n"			\
 				"99:\n"					\
@@ -1143,18 +1143,23 @@
 				"	.llong 0\n"			\
 				"	.llong 0\n"			\
 				".previous"				\
-			: "=r" (rval) : "i" (CPU_FTR_CELL_TB_BUG)); rval;})
+			: "=r" (rval) \
+			: "i" (CPU_FTR_CELL_TB_BUG), "i" (SPRN_TBRL)); \
+			rval;})
 #else
 #define mftb()		({unsigned long rval;	\
-			asm volatile("mftb %0" : "=r" (rval)); rval;})
+			asm volatile("mfspr %0, %1" : \
+				     "=r" (rval) : "i" (SPRN_TBRL)); rval;})
 #endif /* !CONFIG_PPC_CELL */
 
 #else /* __powerpc64__ */
 
 #define mftbl()		({unsigned long rval;	\
-			asm volatile("mftbl %0" : "=r" (rval)); rval;})
+			asm volatile("mfspr %0, %1" : "=r" (rval) : \
+				"i" (SPRN_TBRL)); rval;})
 #define mftbu()		({unsigned long rval;	\
-			asm volatile("mftbu %0" : "=r" (rval)); rval;})
+			asm volatile("mfspr %0, %1" : "=r" (rval) : \
+				"i" (SPRN_TBRU)); rval;})
 #endif /* !__powerpc64__ */
 
 #define mttbl(v)	asm volatile("mttbl %0":: "r"(v))

arch/powerpc/include/asm/reg_booke.h

@@ -29,10 +29,10 @@
 #if defined(CONFIG_PPC_BOOK3E_64)
 #define MSR_64BIT	MSR_CM
 
-#define MSR_		MSR_ME | MSR_CE
-#define MSR_KERNEL	MSR_ | MSR_64BIT
-#define MSR_USER32	MSR_ | MSR_PR | MSR_EE
-#define MSR_USER64	MSR_USER32 | MSR_64BIT
+#define MSR_		(MSR_ME | MSR_CE)
+#define MSR_KERNEL	(MSR_ | MSR_64BIT)
+#define MSR_USER32	(MSR_ | MSR_PR | MSR_EE)
+#define MSR_USER64	(MSR_USER32 | MSR_64BIT)
 #elif defined (CONFIG_40x)
 #define MSR_KERNEL	(MSR_ME|MSR_RI|MSR_IR|MSR_DR|MSR_CE)
 #define MSR_USER	(MSR_KERNEL|MSR_PR|MSR_EE)

arch/powerpc/include/asm/reg_fsl_emb.h

@@ -17,12 +17,16 @@
 /* Freescale Book E Performance Monitor APU Registers */
 #define PMRN_PMC0	0x010	/* Performance Monitor Counter 0 */
 #define PMRN_PMC1	0x011	/* Performance Monitor Counter 1 */
-#define PMRN_PMC2	0x012	/* Performance Monitor Counter 1 */
-#define PMRN_PMC3	0x013	/* Performance Monitor Counter 1 */
+#define PMRN_PMC2	0x012	/* Performance Monitor Counter 2 */
+#define PMRN_PMC3	0x013	/* Performance Monitor Counter 3 */
+#define PMRN_PMC4	0x014	/* Performance Monitor Counter 4 */
+#define PMRN_PMC5	0x015	/* Performance Monitor Counter 5 */
 #define PMRN_PMLCA0	0x090	/* PM Local Control A0 */
 #define PMRN_PMLCA1	0x091	/* PM Local Control A1 */
 #define PMRN_PMLCA2	0x092	/* PM Local Control A2 */
 #define PMRN_PMLCA3	0x093	/* PM Local Control A3 */
+#define PMRN_PMLCA4	0x094	/* PM Local Control A4 */
+#define PMRN_PMLCA5	0x095	/* PM Local Control A5 */
 
 #define PMLCA_FC	0x80000000	/* Freeze Counter */
 #define PMLCA_FCS	0x40000000	/* Freeze in Supervisor */
@@ -30,14 +34,18 @@
 #define PMLCA_FCM1	0x10000000	/* Freeze when PMM==1 */
 #define PMLCA_FCM0	0x08000000	/* Freeze when PMM==0 */
 #define PMLCA_CE	0x04000000	/* Condition Enable */
+#define PMLCA_FGCS1	0x00000002	/* Freeze in guest state */
+#define PMLCA_FGCS0	0x00000001	/* Freeze in hypervisor state */
 
-#define PMLCA_EVENT_MASK 0x00ff0000	/* Event field */
+#define PMLCA_EVENT_MASK 0x01ff0000	/* Event field */
 #define PMLCA_EVENT_SHIFT	16
 
 #define PMRN_PMLCB0	0x110	/* PM Local Control B0 */
 #define PMRN_PMLCB1	0x111	/* PM Local Control B1 */
 #define PMRN_PMLCB2	0x112	/* PM Local Control B2 */
 #define PMRN_PMLCB3	0x113	/* PM Local Control B3 */
+#define PMRN_PMLCB4	0x114	/* PM Local Control B4 */
+#define PMRN_PMLCB5	0x115	/* PM Local Control B5 */
 
 #define PMLCB_THRESHMUL_MASK	0x0700	/* Threshold Multiple Field */
 #define PMLCB_THRESHMUL_SHIFT	8
@@ -55,16 +63,22 @@
 
 #define PMRN_UPMC0	0x000	/* User Performance Monitor Counter 0 */
 #define PMRN_UPMC1	0x001	/* User Performance Monitor Counter 1 */
-#define PMRN_UPMC2	0x002	/* User Performance Monitor Counter 1 */
-#define PMRN_UPMC3	0x003	/* User Performance Monitor Counter 1 */
+#define PMRN_UPMC2	0x002	/* User Performance Monitor Counter 2 */
+#define PMRN_UPMC3	0x003	/* User Performance Monitor Counter 3 */
+#define PMRN_UPMC4	0x004	/* User Performance Monitor Counter 4 */
+#define PMRN_UPMC5	0x005	/* User Performance Monitor Counter 5 */
 #define PMRN_UPMLCA0	0x080	/* User PM Local Control A0 */
 #define PMRN_UPMLCA1	0x081	/* User PM Local Control A1 */
 #define PMRN_UPMLCA2	0x082	/* User PM Local Control A2 */
 #define PMRN_UPMLCA3	0x083	/* User PM Local Control A3 */
+#define PMRN_UPMLCA4	0x084	/* User PM Local Control A4 */
+#define PMRN_UPMLCA5	0x085	/* User PM Local Control A5 */
 #define PMRN_UPMLCB0	0x100	/* User PM Local Control B0 */
 #define PMRN_UPMLCB1	0x101	/* User PM Local Control B1 */
 #define PMRN_UPMLCB2	0x102	/* User PM Local Control B2 */
 #define PMRN_UPMLCB3	0x103	/* User PM Local Control B3 */
+#define PMRN_UPMLCB4	0x104	/* User PM Local Control B4 */
+#define PMRN_UPMLCB5	0x105	/* User PM Local Control B5 */
 #define PMRN_UPMGC0	0x180	/* User PM Global Control 0 */
 
 

arch/powerpc/include/asm/rtas.h

@@ -44,12 +44,12 @@
  *
  */
 
-typedef u32 rtas_arg_t;
+typedef __be32 rtas_arg_t;
 
 struct rtas_args {
-	u32 token;
-	u32 nargs;
-	u32 nret; 
+	__be32 token;
+	__be32 nargs;
+	__be32 nret; 
 	rtas_arg_t args[16];
 	rtas_arg_t *rets;     /* Pointer to return values in args[]. */
 };  

arch/powerpc/include/asm/smp.h

@@ -112,6 +112,7 @@ static inline struct cpumask *cpu_core_mask(int cpu)
 }
 
 extern int cpu_to_core_id(int cpu);
+extern int cpu_to_chip_id(int cpu);
 
 /* Since OpenPIC has only 4 IPIs, we use slightly different message numbers.
  *
@@ -186,6 +187,8 @@ extern int smt_enabled_at_boot;
 extern int smp_mpic_probe(void);
 extern void smp_mpic_setup_cpu(int cpu);
 extern int smp_generic_kick_cpu(int nr);
+extern int smp_generic_cpu_bootable(unsigned int nr);
+
 
 extern void smp_generic_give_timebase(void);
 extern void smp_generic_take_timebase(void);

arch/powerpc/include/asm/spinlock.h

@@ -32,8 +32,12 @@
 
 #ifdef CONFIG_PPC64
 /* use 0x800000yy when locked, where yy == CPU number */
+#ifdef __BIG_ENDIAN__
 #define LOCK_TOKEN	(*(u32 *)(&get_paca()->lock_token))
 #else
+#define LOCK_TOKEN	(*(u32 *)(&get_paca()->paca_index))
+#endif
+#else
 #define LOCK_TOKEN	1
 #endif
 
@@ -96,7 +100,7 @@ static inline int arch_spin_trylock(arch_spinlock_t *lock)
 
 #if defined(CONFIG_PPC_SPLPAR)
 /* We only yield to the hypervisor if we are in shared processor mode */
-#define SHARED_PROCESSOR (local_paca->lppaca_ptr->shared_proc)
+#define SHARED_PROCESSOR (lppaca_shared_proc(local_paca->lppaca_ptr))
 extern void __spin_yield(arch_spinlock_t *lock);
 extern void __rw_yield(arch_rwlock_t *lock);
 #else /* SPLPAR */

arch/powerpc/include/asm/switch_to.h

@@ -25,11 +25,8 @@ static inline void save_tar(struct thread_struct *prev)
 static inline void save_tar(struct thread_struct *prev) {}
 #endif
 
-extern void giveup_fpu(struct task_struct *);
 extern void load_up_fpu(void);
-extern void disable_kernel_fp(void);
 extern void enable_kernel_fp(void);
-extern void flush_fp_to_thread(struct task_struct *);
 extern void enable_kernel_altivec(void);
 extern void load_up_altivec(struct task_struct *);
 extern int emulate_altivec(struct pt_regs *);
@@ -47,6 +44,14 @@ static inline void discard_lazy_cpu_state(void)
 }
 #endif
 
+#ifdef CONFIG_PPC_FPU
+extern void flush_fp_to_thread(struct task_struct *);
+extern void giveup_fpu(struct task_struct *);
+#else
+static inline void flush_fp_to_thread(struct task_struct *t) { }
+static inline void giveup_fpu(struct task_struct *t) { }
+#endif
+
 #ifdef CONFIG_ALTIVEC
 extern void flush_altivec_to_thread(struct task_struct *);
 extern void giveup_altivec(struct task_struct *);

arch/powerpc/include/asm/timex.h

@@ -29,7 +29,7 @@ static inline cycles_t get_cycles(void)
 	ret = 0;
 
 	__asm__ __volatile__(
-		"97:	mftb %0\n"
+		"97:	mfspr %0, %2\n"
 		"99:\n"
 		".section __ftr_fixup,\"a\"\n"
 		".align 2\n"
@@ -41,7 +41,7 @@ static inline cycles_t get_cycles(void)
 		"	.long 0\n"
 		"	.long 0\n"
 		".previous"
-		: "=r" (ret) : "i" (CPU_FTR_601));
+		: "=r" (ret) : "i" (CPU_FTR_601), "i" (SPRN_TBRL));
 	return ret;
 #endif
 }

arch/powerpc/include/asm/topology.h

@@ -96,6 +96,7 @@ static inline int prrn_is_enabled(void)
 #ifdef CONFIG_PPC64
 #include <asm/smp.h>
 
+#define topology_physical_package_id(cpu)	(cpu_to_chip_id(cpu))
 #define topology_thread_cpumask(cpu)	(per_cpu(cpu_sibling_map, cpu))
 #define topology_core_cpumask(cpu)	(per_cpu(cpu_core_map, cpu))
 #define topology_core_id(cpu)		(cpu_to_core_id(cpu))

arch/powerpc/include/asm/udbg.h

@@ -27,10 +27,11 @@ extern void udbg_printf(const char *fmt, ...)
 	__attribute__ ((format (printf, 1, 2)));
 extern void udbg_progress(char *s, unsigned short hex);
 
-extern void udbg_init_uart(void __iomem *comport, unsigned int speed,
-			   unsigned int clock);
-extern unsigned int udbg_probe_uart_speed(void __iomem *comport,
-					  unsigned int clock);
+extern void udbg_uart_init_mmio(void __iomem *addr, unsigned int stride);
+extern void udbg_uart_init_pio(unsigned long port, unsigned int stride);
+
+extern void udbg_uart_setup(unsigned int speed, unsigned int clock);
+extern unsigned int udbg_probe_uart_speed(unsigned int clock);
 
 struct device_node;
 extern void udbg_scc_init(int force_scc);

arch/powerpc/include/uapi/asm/elf.h

@@ -107,26 +107,25 @@ typedef elf_gregset_t32 compat_elf_gregset_t;
 # define ELF_NVRREG	34	/* includes vscr & vrsave in split vectors */
 # define ELF_NVSRHALFREG 32	/* Half the vsx registers */
 # define ELF_GREG_TYPE	elf_greg_t64
+# define ELF_ARCH	EM_PPC64
+# define ELF_CLASS	ELFCLASS64
+typedef elf_greg_t64 elf_greg_t;
+typedef elf_gregset_t64 elf_gregset_t;
 #else
 # define ELF_NEVRREG	34	/* includes acc (as 2) */
 # define ELF_NVRREG	33	/* includes vscr */
 # define ELF_GREG_TYPE	elf_greg_t32
 # define ELF_ARCH	EM_PPC
 # define ELF_CLASS	ELFCLASS32
-# define ELF_DATA	ELFDATA2MSB
+typedef elf_greg_t32 elf_greg_t;
+typedef elf_gregset_t32 elf_gregset_t;
 #endif /* __powerpc64__ */
 
-#ifndef ELF_ARCH
-# define ELF_ARCH	EM_PPC64
-# define ELF_CLASS	ELFCLASS64
-# define ELF_DATA	ELFDATA2MSB
-  typedef elf_greg_t64 elf_greg_t;
-  typedef elf_gregset_t64 elf_gregset_t;
+#ifdef __BIG_ENDIAN__
+#define ELF_DATA	ELFDATA2MSB
 #else
-  /* Assumption: ELF_ARCH == EM_PPC and ELF_CLASS == ELFCLASS32 */
-  typedef elf_greg_t32 elf_greg_t;
-  typedef elf_gregset_t32 elf_gregset_t;
-#endif /* ELF_ARCH */
+#define ELF_DATA	ELFDATA2LSB
+#endif
 
 /* Floating point registers */
 typedef double elf_fpreg_t;

arch/powerpc/kernel/Makefile

@@ -55,7 +55,6 @@ obj-$(CONFIG_PPC_RTAS)		+= rtas.o rtas-rtc.o $(rtaspci-y-y)
 obj-$(CONFIG_PPC_RTAS_DAEMON)	+= rtasd.o
 obj-$(CONFIG_RTAS_FLASH)	+= rtas_flash.o
 obj-$(CONFIG_RTAS_PROC)		+= rtas-proc.o
-obj-$(CONFIG_LPARCFG)		+= lparcfg.o
 obj-$(CONFIG_IBMVIO)		+= vio.o
 obj-$(CONFIG_IBMEBUS)           += ibmebus.o
 obj-$(CONFIG_EEH)              += eeh.o eeh_pe.o eeh_dev.o eeh_cache.o \
@@ -117,9 +116,7 @@ obj-$(CONFIG_DYNAMIC_FTRACE)	+= ftrace.o
 obj-$(CONFIG_FUNCTION_GRAPH_TRACER)	+= ftrace.o
 obj-$(CONFIG_FTRACE_SYSCALLS)	+= ftrace.o
 
-obj-$(CONFIG_8XX_MINIMAL_FPEMU) += softemu8xx.o
-
-ifneq ($(CONFIG_PPC_INDIRECT_IO),y)
+ifneq ($(CONFIG_PPC_INDIRECT_PIO),y)
 obj-y				+= iomap.o
 endif
 

arch/powerpc/kernel/align.c

@@ -651,6 +651,10 @@ static int emulate_vsx(unsigned char __user *addr, unsigned int reg,
 	int sw = 0;
 	int i, j;
 
+	/* userland only */
+	if (unlikely(!user_mode(regs)))
+		return 0;
+
 	flush_vsx_to_thread(current);
 
 	if (reg < 32)
@@ -764,6 +768,16 @@ int fix_alignment(struct pt_regs *regs)
 	nb = aligninfo[instr].len;
 	flags = aligninfo[instr].flags;
 
+	/* ldbrx/stdbrx overlap lfs/stfs in the DSISR unfortunately */
+	if (IS_XFORM(instruction) && ((instruction >> 1) & 0x3ff) == 532) {
+		nb = 8;
+		flags = LD+SW;
+	} else if (IS_XFORM(instruction) &&
+		   ((instruction >> 1) & 0x3ff) == 660) {
+		nb = 8;
+		flags = ST+SW;
+	}
+
 	/* Byteswap little endian loads and stores */
 	swiz = 0;
 	if (regs->msr & MSR_LE) {

arch/powerpc/kernel/btext.c

@@ -25,11 +25,6 @@
 static void scrollscreen(void);
 #endif
 
-static void draw_byte(unsigned char c, long locX, long locY);
-static void draw_byte_32(unsigned char *bits, unsigned int *base, int rb);
-static void draw_byte_16(unsigned char *bits, unsigned int *base, int rb);
-static void draw_byte_8(unsigned char *bits, unsigned int *base, int rb);
-
 #define __force_data __attribute__((__section__(".data")))
 
 static int g_loc_X __force_data;
@@ -52,6 +47,26 @@ static unsigned char vga_font[cmapsz];
 int boot_text_mapped __force_data = 0;
 int force_printk_to_btext = 0;
 
+extern void rmci_on(void);
+extern void rmci_off(void);
+
+static inline void rmci_maybe_on(void)
+{
+#if defined(CONFIG_PPC_EARLY_DEBUG_BOOTX) && defined(CONFIG_PPC64)
+	if (!(mfmsr() & MSR_DR))
+		rmci_on();
+#endif
+}
+
+static inline void rmci_maybe_off(void)
+{
+#if defined(CONFIG_PPC_EARLY_DEBUG_BOOTX) && defined(CONFIG_PPC64)
+	if (!(mfmsr() & MSR_DR))
+		rmci_off();
+#endif
+}
+
+
 #ifdef CONFIG_PPC32
 /* Calc BAT values for mapping the display and store them
  * in disp_BAT.  Those values are then used from head.S to map
@@ -134,7 +149,7 @@ void __init btext_unmap(void)
  *    changes.
  */
 
-static void map_boot_text(void)
+void btext_map(void)
 {
 	unsigned long base, offset, size;
 	unsigned char *vbase;
@@ -209,7 +224,7 @@ int btext_initialize(struct device_node *np)
 	dispDeviceRect[2] = width;
 	dispDeviceRect[3] = height;
 
-	map_boot_text();
+	btext_map();
 
 	return 0;
 }
@@ -283,7 +298,7 @@ void btext_update_display(unsigned long phys, int width, int height,
 		iounmap(logicalDisplayBase);
 		boot_text_mapped = 0;
 	}
-	map_boot_text();
+	btext_map();
 	g_loc_X = 0;
 	g_loc_Y = 0;
 	g_max_loc_X = width / 8;
@@ -298,6 +313,7 @@ void btext_clearscreen(void)
 					(dispDeviceDepth >> 3)) >> 2;
 	int i,j;
 
+	rmci_maybe_on();
 	for (i=0; i<(dispDeviceRect[3] - dispDeviceRect[1]); i++)
 	{
 		unsigned int *ptr = base;
@@ -305,6 +321,7 @@ void btext_clearscreen(void)
 			*(ptr++) = 0;
 		base += (dispDeviceRowBytes >> 2);
 	}
+	rmci_maybe_off();
 }
 
 void btext_flushscreen(void)
@@ -355,6 +372,8 @@ static void scrollscreen(void)
 				   (dispDeviceDepth >> 3)) >> 2;
 	int i,j;
 
+	rmci_maybe_on();
+
 	for (i=0; i<(dispDeviceRect[3] - dispDeviceRect[1] - 16); i++)
 	{
 		unsigned int *src_ptr = src;
@@ -371,9 +390,116 @@ static void scrollscreen(void)
 			*(dst_ptr++) = 0;
 		dst += (dispDeviceRowBytes >> 2);
 	}
+
+	rmci_maybe_off();
 }
 #endif /* ndef NO_SCROLL */
 
+static unsigned int expand_bits_8[16] = {
+	0x00000000,
+	0x000000ff,
+	0x0000ff00,
+	0x0000ffff,
+	0x00ff0000,
+	0x00ff00ff,
+	0x00ffff00,
+	0x00ffffff,
+	0xff000000,
+	0xff0000ff,
+	0xff00ff00,
+	0xff00ffff,
+	0xffff0000,
+	0xffff00ff,
+	0xffffff00,
+	0xffffffff
+};
+
+static unsigned int expand_bits_16[4] = {
+	0x00000000,
+	0x0000ffff,
+	0xffff0000,
+	0xffffffff
+};
+
+
+static void draw_byte_32(unsigned char *font, unsigned int *base, int rb)
+{
+	int l, bits;
+	int fg = 0xFFFFFFFFUL;
+	int bg = 0x00000000UL;
+
+	for (l = 0; l < 16; ++l)
+	{
+		bits = *font++;
+		base[0] = (-(bits >> 7) & fg) ^ bg;
+		base[1] = (-((bits >> 6) & 1) & fg) ^ bg;
+		base[2] = (-((bits >> 5) & 1) & fg) ^ bg;
+		base[3] = (-((bits >> 4) & 1) & fg) ^ bg;
+		base[4] = (-((bits >> 3) & 1) & fg) ^ bg;
+		base[5] = (-((bits >> 2) & 1) & fg) ^ bg;
+		base[6] = (-((bits >> 1) & 1) & fg) ^ bg;
+		base[7] = (-(bits & 1) & fg) ^ bg;
+		base = (unsigned int *) ((char *)base + rb);
+	}
+}
+
+static inline void draw_byte_16(unsigned char *font, unsigned int *base, int rb)
+{
+	int l, bits;
+	int fg = 0xFFFFFFFFUL;
+	int bg = 0x00000000UL;
+	unsigned int *eb = (int *)expand_bits_16;
+
+	for (l = 0; l < 16; ++l)
+	{
+		bits = *font++;
+		base[0] = (eb[bits >> 6] & fg) ^ bg;
+		base[1] = (eb[(bits >> 4) & 3] & fg) ^ bg;
+		base[2] = (eb[(bits >> 2) & 3] & fg) ^ bg;
+		base[3] = (eb[bits & 3] & fg) ^ bg;
+		base = (unsigned int *) ((char *)base + rb);
+	}
+}
+
+static inline void draw_byte_8(unsigned char *font, unsigned int *base, int rb)
+{
+	int l, bits;
+	int fg = 0x0F0F0F0FUL;
+	int bg = 0x00000000UL;
+	unsigned int *eb = (int *)expand_bits_8;
+
+	for (l = 0; l < 16; ++l)
+	{
+		bits = *font++;
+		base[0] = (eb[bits >> 4] & fg) ^ bg;
+		base[1] = (eb[bits & 0xf] & fg) ^ bg;
+		base = (unsigned int *) ((char *)base + rb);
+	}
+}
+
+static noinline void draw_byte(unsigned char c, long locX, long locY)
+{
+	unsigned char *base	= calc_base(locX << 3, locY << 4);
+	unsigned char *font	= &vga_font[((unsigned int)c) * 16];
+	int rb			= dispDeviceRowBytes;
+
+	rmci_maybe_on();
+	switch(dispDeviceDepth) {
+	case 24:
+	case 32:
+		draw_byte_32(font, (unsigned int *)base, rb);
+		break;
+	case 15:
+	case 16:
+		draw_byte_16(font, (unsigned int *)base, rb);
+		break;
+	case 8:
+		draw_byte_8(font, (unsigned int *)base, rb);
+		break;
+	}
+	rmci_maybe_off();
+}
+
 void btext_drawchar(char c)
 {
 	int cline = 0;
@@ -465,107 +591,12 @@ void btext_drawhex(unsigned long v)
 	btext_drawchar(' ');
 }
 
-static void draw_byte(unsigned char c, long locX, long locY)
-{
-	unsigned char *base	= calc_base(locX << 3, locY << 4);
-	unsigned char *font	= &vga_font[((unsigned int)c) * 16];
-	int rb			= dispDeviceRowBytes;
-
-	switch(dispDeviceDepth) {
-	case 24:
-	case 32:
-		draw_byte_32(font, (unsigned int *)base, rb);
-		break;
-	case 15:
-	case 16:
-		draw_byte_16(font, (unsigned int *)base, rb);
-		break;
-	case 8:
-		draw_byte_8(font, (unsigned int *)base, rb);
-		break;
-	}
-}
-
-static unsigned int expand_bits_8[16] = {
-	0x00000000,
-	0x000000ff,
-	0x0000ff00,
-	0x0000ffff,
-	0x00ff0000,
-	0x00ff00ff,
-	0x00ffff00,
-	0x00ffffff,
-	0xff000000,
-	0xff0000ff,
-	0xff00ff00,
-	0xff00ffff,
-	0xffff0000,
-	0xffff00ff,
-	0xffffff00,
-	0xffffffff
-};
-
-static unsigned int expand_bits_16[4] = {
-	0x00000000,
-	0x0000ffff,
-	0xffff0000,
-	0xffffffff
-};
-
-
-static void draw_byte_32(unsigned char *font, unsigned int *base, int rb)
-{
-	int l, bits;
-	int fg = 0xFFFFFFFFUL;
-	int bg = 0x00000000UL;
-
-	for (l = 0; l < 16; ++l)
-	{
-		bits = *font++;
-		base[0] = (-(bits >> 7) & fg) ^ bg;
-		base[1] = (-((bits >> 6) & 1) & fg) ^ bg;
-		base[2] = (-((bits >> 5) & 1) & fg) ^ bg;
-		base[3] = (-((bits >> 4) & 1) & fg) ^ bg;
-		base[4] = (-((bits >> 3) & 1) & fg) ^ bg;
-		base[5] = (-((bits >> 2) & 1) & fg) ^ bg;
-		base[6] = (-((bits >> 1) & 1) & fg) ^ bg;
-		base[7] = (-(bits & 1) & fg) ^ bg;
-		base = (unsigned int *) ((char *)base + rb);
-	}
-}
-
-static void draw_byte_16(unsigned char *font, unsigned int *base, int rb)
-{
-	int l, bits;
-	int fg = 0xFFFFFFFFUL;
-	int bg = 0x00000000UL;
-	unsigned int *eb = (int *)expand_bits_16;
-
-	for (l = 0; l < 16; ++l)
-	{
-		bits = *font++;
-		base[0] = (eb[bits >> 6] & fg) ^ bg;
-		base[1] = (eb[(bits >> 4) & 3] & fg) ^ bg;
-		base[2] = (eb[(bits >> 2) & 3] & fg) ^ bg;
-		base[3] = (eb[bits & 3] & fg) ^ bg;
-		base = (unsigned int *) ((char *)base + rb);
-	}
-}
-
-static void draw_byte_8(unsigned char *font, unsigned int *base, int rb)
+void __init udbg_init_btext(void)
 {
-	int l, bits;
-	int fg = 0x0F0F0F0FUL;
-	int bg = 0x00000000UL;
-	unsigned int *eb = (int *)expand_bits_8;
-
-	for (l = 0; l < 16; ++l)
-	{
-		bits = *font++;
-		base[0] = (eb[bits >> 4] & fg) ^ bg;
-		base[1] = (eb[bits & 0xf] & fg) ^ bg;
-		base = (unsigned int *) ((char *)base + rb);
-	}
+	/* If btext is enabled, we might have a BAT setup for early display,
+	 * thus we do enable some very basic udbg output
+	 */
+	udbg_putc = btext_drawchar;
 }
 
 static unsigned char vga_font[cmapsz] = {
@@ -913,10 +944,3 @@ static unsigned char vga_font[cmapsz] = {
 0x00, 0x00, 0x00, 0x00,
 };
 
-void __init udbg_init_btext(void)
-{
-	/* If btext is enabled, we might have a BAT setup for early display,
-	 * thus we do enable some very basic udbg output
-	 */
-	udbg_putc = btext_drawchar;
-}

arch/powerpc/kernel/cacheinfo.c

@@ -196,7 +196,7 @@ static void cache_cpu_set(struct cache *cache, int cpu)
 static int cache_size(const struct cache *cache, unsigned int *ret)
 {
 	const char *propname;
-	const u32 *cache_size;
+	const __be32 *cache_size;
 
 	propname = cache_type_info[cache->type].size_prop;
 
@@ -204,7 +204,7 @@ static int cache_size(const struct cache *cache, unsigned int *ret)
 	if (!cache_size)
 		return -ENODEV;
 
-	*ret = *cache_size;
+	*ret = of_read_number(cache_size, 1);
 	return 0;
 }
 
@@ -222,7 +222,7 @@ static int cache_size_kb(const struct cache *cache, unsigned int *ret)
 /* not cache_line_size() because that's a macro in include/linux/cache.h */
 static int cache_get_line_size(const struct cache *cache, unsigned int *ret)
 {
-	const u32 *line_size;
+	const __be32 *line_size;
 	int i, lim;
 
 	lim = ARRAY_SIZE(cache_type_info[cache->type].line_size_props);
@@ -239,14 +239,14 @@ static int cache_get_line_size(const struct cache *cache, unsigned int *ret)
 	if (!line_size)
 		return -ENODEV;
 
-	*ret = *line_size;
+	*ret = of_read_number(line_size, 1);
 	return 0;
 }
 
 static int cache_nr_sets(const struct cache *cache, unsigned int *ret)
 {
 	const char *propname;
-	const u32 *nr_sets;
+	const __be32 *nr_sets;
 
 	propname = cache_type_info[cache->type].nr_sets_prop;
 
@@ -254,7 +254,7 @@ static int cache_nr_sets(const struct cache *cache, unsigned int *ret)
 	if (!nr_sets)
 		return -ENODEV;
 
-	*ret = *nr_sets;
+	*ret = of_read_number(nr_sets, 1);
 	return 0;
 }
 

arch/powerpc/kernel/cpu_setup_fsl_booke.S

@@ -75,7 +75,7 @@ _GLOBAL(__setup_cpu_e500v2)
 	bl	__e500_icache_setup
 	bl	__e500_dcache_setup
 	bl	__setup_e500_ivors
-#ifdef CONFIG_FSL_RIO
+#if defined(CONFIG_FSL_RIO) || defined(CONFIG_FSL_PCI)
 	/* Ensure that RFXE is set */
 	mfspr	r3,SPRN_HID1
 	oris	r3,r3,HID1_RFXE@h

arch/powerpc/kernel/cputable.c

@@ -2105,7 +2105,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
 			MMU_FTR_USE_TLBILX,
 		.icache_bsize		= 64,
 		.dcache_bsize		= 64,
-		.num_pmcs		= 4,
+		.num_pmcs		= 6,
 		.oprofile_cpu_type	= "ppc/e6500",
 		.oprofile_type		= PPC_OPROFILE_FSL_EMB,
 		.cpu_setup		= __setup_cpu_e6500,

arch/powerpc/kernel/entry_64.S

@@ -102,7 +102,8 @@ BEGIN_FW_FTR_SECTION
 	/* if from user, see if there are any DTL entries to process */
 	ld	r10,PACALPPACAPTR(r13)	/* get ptr to VPA */
 	ld	r11,PACA_DTL_RIDX(r13)	/* get log read index */
-	ld	r10,LPPACA_DTLIDX(r10)	/* get log write index */
+	addi	r10,r10,LPPACA_DTLIDX
+	LDX_BE	r10,0,r10		/* get log write index */
 	cmpd	cr1,r11,r10
 	beq+	cr1,33f
 	bl	.accumulate_stolen_time
@@ -522,9 +523,11 @@ END_MMU_FTR_SECTION_IFSET(MMU_FTR_1T_SEGMENT)
 	 */
 	ld	r9,PACA_SLBSHADOWPTR(r13)
 	li	r12,0
-	std	r12,SLBSHADOW_STACKESID(r9) /* Clear ESID */
-	std	r7,SLBSHADOW_STACKVSID(r9)  /* Save VSID */
-	std	r0,SLBSHADOW_STACKESID(r9)  /* Save ESID */
+	std	r12,SLBSHADOW_STACKESID(r9)	/* Clear ESID */
+	li	r12,SLBSHADOW_STACKVSID
+	STDX_BE	r7,r12,r9			/* Save VSID */
+	li	r12,SLBSHADOW_STACKESID
+	STDX_BE	r0,r12,r9			/* Save ESID */
 
 	/* No need to check for MMU_FTR_NO_SLBIE_B here, since when
 	 * we have 1TB segments, the only CPUs known to have the errata
@@ -575,34 +578,15 @@ BEGIN_FTR_SECTION
 	ld	r7,DSCR_DEFAULT@toc(2)
 	ld	r0,THREAD_DSCR(r4)
 	cmpwi	r6,0
-	li	r8, FSCR_DSCR
 	bne	1f
 	ld	r0,0(r7)
-	b	3f
 1:
-  BEGIN_FTR_SECTION_NESTED(70)
-	mfspr	r6, SPRN_FSCR
-	or	r6, r6, r8
-	mtspr	SPRN_FSCR, r6
-    BEGIN_FTR_SECTION_NESTED(69)
-	mfspr	r6, SPRN_HFSCR
-	or	r6, r6, r8
-	mtspr	SPRN_HFSCR, r6
-    END_FTR_SECTION_NESTED(CPU_FTR_HVMODE, CPU_FTR_HVMODE, 69)
-	b	4f
-  END_FTR_SECTION_NESTED(CPU_FTR_ARCH_207S, CPU_FTR_ARCH_207S, 70)
-3:
-  BEGIN_FTR_SECTION_NESTED(70)
-	mfspr	r6, SPRN_FSCR
-	andc	r6, r6, r8
-	mtspr	SPRN_FSCR, r6
-    BEGIN_FTR_SECTION_NESTED(69)
-	mfspr	r6, SPRN_HFSCR
-	andc	r6, r6, r8
-	mtspr	SPRN_HFSCR, r6
-    END_FTR_SECTION_NESTED(CPU_FTR_HVMODE, CPU_FTR_HVMODE, 69)
-  END_FTR_SECTION_NESTED(CPU_FTR_ARCH_207S, CPU_FTR_ARCH_207S, 70)
-4:	cmpd	r0,r25
+BEGIN_FTR_SECTION_NESTED(70)
+	mfspr	r8, SPRN_FSCR
+	rldimi	r8, r6, FSCR_DSCR_LG, (63 - FSCR_DSCR_LG)
+	mtspr	SPRN_FSCR, r8
+END_FTR_SECTION_NESTED(CPU_FTR_ARCH_207S, CPU_FTR_ARCH_207S, 70)
+	cmpd	r0,r25
 	beq	2f
 	mtspr	SPRN_DSCR,r0
 2:
@@ -737,9 +721,9 @@ resume_kernel:
 
 	/*
 	 * Here we are preempting the current task. We want to make
-	 * sure we are soft-disabled first
+	 * sure we are soft-disabled first and reconcile irq state.
 	 */
-	SOFT_DISABLE_INTS(r3,r4)
+	RECONCILE_IRQ_STATE(r3,r4)
 1:	bl	.preempt_schedule_irq
 
 	/* Re-test flags and eventually loop */

arch/powerpc/kernel/epapr_paravirt.c

@@ -30,22 +30,20 @@ extern u32 epapr_ev_idle_start[];
 
 bool epapr_paravirt_enabled;
 
-static int __init epapr_paravirt_init(void)
+static int __init early_init_dt_scan_epapr(unsigned long node,
+					   const char *uname,
+					   int depth, void *data)
 {
-	struct device_node *hyper_node;
 	const u32 *insts;
-	int len, i;
+	unsigned long len;
+	int i;
 
-	hyper_node = of_find_node_by_path("/hypervisor");
-	if (!hyper_node)
-		return -ENODEV;
-
-	insts = of_get_property(hyper_node, "hcall-instructions", &len);
+	insts = of_get_flat_dt_prop(node, "hcall-instructions", &len);
 	if (!insts)
-		return -ENODEV;
+		return 0;
 
 	if (len % 4 || len > (4 * 4))
-		return -ENODEV;
+		return -1;
 
 	for (i = 0; i < (len / 4); i++) {
 		patch_instruction(epapr_hypercall_start + i, insts[i]);
@@ -55,13 +53,19 @@ static int __init epapr_paravirt_init(void)
 	}
 
 #if !defined(CONFIG_64BIT) || defined(CONFIG_PPC_BOOK3E_64)
-	if (of_get_property(hyper_node, "has-idle", NULL))
+	if (of_get_flat_dt_prop(node, "has-idle", NULL))
 		ppc_md.power_save = epapr_ev_idle;
 #endif
 
 	epapr_paravirt_enabled = true;
 
+	return 1;
+}
+
+int __init epapr_paravirt_early_init(void)
+{
+	of_scan_flat_dt(early_init_dt_scan_epapr, NULL);
+
 	return 0;
 }
 
-early_initcall(epapr_paravirt_init);

arch/powerpc/kernel/exceptions-64e.S

@@ -198,9 +198,9 @@ exc_##n##_common:							    \
 /* This second version is meant for exceptions that don't immediately
  * hard-enable. We set a bit in paca->irq_happened to ensure that
  * a subsequent call to arch_local_irq_restore() will properly
- * hard-enable and avoid the fast-path
+ * hard-enable and avoid the fast-path, and then reconcile irq state.
  */
-#define INTS_DISABLE	SOFT_DISABLE_INTS(r3,r4)
+#define INTS_DISABLE	RECONCILE_IRQ_STATE(r3,r4)
 
 /* This is called by exceptions that used INTS_KEEP (that did not touch
  * irq indicators in the PACA). This will restore MSR:EE to it's previous

arch/powerpc/kernel/exceptions-64s.S

@@ -293,27 +293,31 @@ system_call_pSeries:
 	 * out of line to handle them
 	 */
 	. = 0xe00
-hv_exception_trampoline:
+hv_data_storage_trampoline:
 	SET_SCRATCH0(r13)
 	EXCEPTION_PROLOG_0(PACA_EXGEN)
 	b	h_data_storage_hv
 
 	. = 0xe20
+hv_instr_storage_trampoline:
 	SET_SCRATCH0(r13)
 	EXCEPTION_PROLOG_0(PACA_EXGEN)
 	b	h_instr_storage_hv
 
 	. = 0xe40
+emulation_assist_trampoline:
 	SET_SCRATCH0(r13)
 	EXCEPTION_PROLOG_0(PACA_EXGEN)
 	b	emulation_assist_hv
 
 	. = 0xe60
+hv_exception_trampoline:
 	SET_SCRATCH0(r13)
 	EXCEPTION_PROLOG_0(PACA_EXGEN)
 	b	hmi_exception_hv
 
 	. = 0xe80
+hv_doorbell_trampoline:
 	SET_SCRATCH0(r13)
 	EXCEPTION_PROLOG_0(PACA_EXGEN)
 	b	h_doorbell_hv
@@ -323,32 +327,32 @@ hv_exception_trampoline:
 	 * prolog code of the PerformanceMonitor one. A little
 	 * trickery is thus necessary
 	 */
-performance_monitor_pSeries_1:
 	. = 0xf00
+performance_monitor_pseries_trampoline:
 	SET_SCRATCH0(r13)
 	EXCEPTION_PROLOG_0(PACA_EXGEN)
 	b	performance_monitor_pSeries
 
-altivec_unavailable_pSeries_1:
 	. = 0xf20
+altivec_unavailable_pseries_trampoline:
 	SET_SCRATCH0(r13)
 	EXCEPTION_PROLOG_0(PACA_EXGEN)
 	b	altivec_unavailable_pSeries
 
-vsx_unavailable_pSeries_1:
 	. = 0xf40
+vsx_unavailable_pseries_trampoline:
 	SET_SCRATCH0(r13)
 	EXCEPTION_PROLOG_0(PACA_EXGEN)
 	b	vsx_unavailable_pSeries
 
-facility_unavailable_trampoline:
 	. = 0xf60
+facility_unavailable_trampoline:
 	SET_SCRATCH0(r13)
 	EXCEPTION_PROLOG_0(PACA_EXGEN)
 	b	facility_unavailable_pSeries
 
-hv_facility_unavailable_trampoline:
 	. = 0xf80
+hv_facility_unavailable_trampoline:
 	SET_SCRATCH0(r13)
 	EXCEPTION_PROLOG_0(PACA_EXGEN)
 	b	facility_unavailable_hv
@@ -367,11 +371,7 @@ denorm_exception_hv:
 	HMT_MEDIUM_PPR_DISCARD
 	mtspr	SPRN_SPRG_HSCRATCH0,r13
 	EXCEPTION_PROLOG_0(PACA_EXGEN)
-	std	r11,PACA_EXGEN+EX_R11(r13)
-	std	r12,PACA_EXGEN+EX_R12(r13)
-	mfspr	r9,SPRN_SPRG_HSCRATCH0
-	std	r9,PACA_EXGEN+EX_R13(r13)
-	mfcr	r9
+	EXCEPTION_PROLOG_1(PACA_EXGEN, NOTEST, 0x1500)
 
 #ifdef CONFIG_PPC_DENORMALISATION
 	mfspr	r10,SPRN_HSRR1
@@ -381,6 +381,7 @@ denorm_exception_hv:
 	bne+	denorm_assist
 #endif
 
+	KVMTEST(0x1500)
 	EXCEPTION_PROLOG_PSERIES_1(denorm_common, EXC_HV)
 	KVM_HANDLER_SKIP(PACA_EXGEN, EXC_STD, 0x1500)
 
@@ -501,6 +502,10 @@ denorm_done:
 	mtcrf	0x80,r9
 	ld	r9,PACA_EXGEN+EX_R9(r13)
 	RESTORE_PPR_PACA(PACA_EXGEN, r10)
+BEGIN_FTR_SECTION
+	ld	r10,PACA_EXGEN+EX_CFAR(r13)
+	mtspr	SPRN_CFAR,r10
+END_FTR_SECTION_IFSET(CPU_FTR_CFAR)
 	ld	r10,PACA_EXGEN+EX_R10(r13)
 	ld	r11,PACA_EXGEN+EX_R11(r13)
 	ld	r12,PACA_EXGEN+EX_R12(r13)
@@ -808,6 +813,7 @@ system_call_relon_pSeries:
 	b	.	/* Can't happen, see v2.07 Book III-S section 6.5 */
 
 	. = 0x4e40
+emulation_assist_relon_trampoline:
 	SET_SCRATCH0(r13)
 	EXCEPTION_PROLOG_0(PACA_EXGEN)
 	b	emulation_assist_relon_hv
@@ -816,36 +822,37 @@ system_call_relon_pSeries:
 	b	.	/* Can't happen, see v2.07 Book III-S section 6.5 */
 
 	. = 0x4e80
+h_doorbell_relon_trampoline:
 	SET_SCRATCH0(r13)
 	EXCEPTION_PROLOG_0(PACA_EXGEN)
 	b	h_doorbell_relon_hv
 
-performance_monitor_relon_pSeries_1:
 	. = 0x4f00
+performance_monitor_relon_pseries_trampoline:
 	SET_SCRATCH0(r13)
 	EXCEPTION_PROLOG_0(PACA_EXGEN)
 	b	performance_monitor_relon_pSeries
 
-altivec_unavailable_relon_pSeries_1:
 	. = 0x4f20
+altivec_unavailable_relon_pseries_trampoline:
 	SET_SCRATCH0(r13)
 	EXCEPTION_PROLOG_0(PACA_EXGEN)
 	b	altivec_unavailable_relon_pSeries
 
-vsx_unavailable_relon_pSeries_1:
 	. = 0x4f40
+vsx_unavailable_relon_pseries_trampoline:
 	SET_SCRATCH0(r13)
 	EXCEPTION_PROLOG_0(PACA_EXGEN)
 	b	vsx_unavailable_relon_pSeries
 
-facility_unavailable_relon_trampoline:
 	. = 0x4f60
+facility_unavailable_relon_trampoline:
 	SET_SCRATCH0(r13)
 	EXCEPTION_PROLOG_0(PACA_EXGEN)
 	b	facility_unavailable_relon_pSeries
 
-hv_facility_unavailable_relon_trampoline:
 	. = 0x4f80
+hv_facility_unavailable_relon_trampoline:
 	SET_SCRATCH0(r13)
 	EXCEPTION_PROLOG_0(PACA_EXGEN)
 	b	hv_facility_unavailable_relon_hv

arch/powerpc/kernel/head_40x.S

@@ -822,14 +822,6 @@ finish_tlb_load:
 	rfi			/* Should sync shadow TLBs */
 	b	.		/* prevent prefetch past rfi */
 
-/* extern void giveup_fpu(struct task_struct *prev)
- *
- * The PowerPC 4xx family of processors do not have an FPU, so this just
- * returns.
- */
-_ENTRY(giveup_fpu)
-	blr
-
 /* This is where the main kernel code starts.
  */
 start_here:

arch/powerpc/kernel/head_44x.S

@@ -784,16 +784,6 @@ _GLOBAL(__fixup_440A_mcheck)
 	sync
 	blr
 
-/*
- * extern void giveup_fpu(struct task_struct *prev)
- *
- * The 44x core does not have an FPU.
- */
-#ifndef CONFIG_PPC_FPU
-_GLOBAL(giveup_fpu)
-	blr
-#endif
-
 _GLOBAL(set_context)
 
 #ifdef CONFIG_BDI_SWITCH

arch/powerpc/kernel/head_64.S

@@ -703,6 +703,7 @@ _GLOBAL(relative_toc)
 	mtlr	r0
 	blr
 
+.balign 8
 p_toc:	.llong	__toc_start + 0x8000 - 0b
 
 /*

arch/powerpc/kernel/head_8xx.S

@@ -691,10 +691,6 @@ modified_instr:
 	b	151b
 #endif
 
-	.globl	giveup_fpu
-giveup_fpu:
-	blr
-
 /*
  * This is where the main kernel code starts.
  */

arch/powerpc/kernel/head_fsl_booke.S

@@ -947,16 +947,6 @@ _GLOBAL(giveup_spe)
 	blr
 #endif /* CONFIG_SPE */
 
-/*
- * extern void giveup_fpu(struct task_struct *prev)
- *
- * Not all FSL Book-E cores have an FPU
- */
-#ifndef CONFIG_PPC_FPU
-_GLOBAL(giveup_fpu)
-	blr
-#endif
-
 /*
  * extern void abort(void)
  *

arch/powerpc/kernel/io-workarounds.c

@@ -53,6 +53,7 @@ static struct iowa_bus *iowa_pci_find(unsigned long vaddr, unsigned long paddr)
 	return NULL;
 }
 
+#ifdef CONFIG_PPC_INDIRECT_MMIO
 struct iowa_bus *iowa_mem_find_bus(const PCI_IO_ADDR addr)
 {
 	unsigned hugepage_shift;
@@ -90,13 +91,25 @@ struct iowa_bus *iowa_mem_find_bus(const PCI_IO_ADDR addr)
 
 	return bus;
 }
+#else /* CONFIG_PPC_INDIRECT_MMIO */
+struct iowa_bus *iowa_mem_find_bus(const PCI_IO_ADDR addr)
+{
+	return NULL;
+}
+#endif /* !CONFIG_PPC_INDIRECT_MMIO */
 
+#ifdef CONFIG_PPC_INDIRECT_PIO
 struct iowa_bus *iowa_pio_find_bus(unsigned long port)
 {
 	unsigned long vaddr = (unsigned long)pci_io_base + port;
 	return iowa_pci_find(vaddr, 0);
 }
-
+#else
+struct iowa_bus *iowa_pio_find_bus(unsigned long port)
+{
+	return NULL;
+}
+#endif
 
 #define DEF_PCI_AC_RET(name, ret, at, al, space, aa)		\
 static ret iowa_##name at					\
@@ -137,6 +150,7 @@ static const struct ppc_pci_io iowa_pci_io = {
 
 };
 
+#ifdef CONFIG_PPC_INDIRECT_MMIO
 static void __iomem *iowa_ioremap(phys_addr_t addr, unsigned long size,
 				  unsigned long flags, void *caller)
 {
@@ -151,6 +165,9 @@ static void __iomem *iowa_ioremap(phys_addr_t addr, unsigned long size,
 	}
 	return res;
 }
+#else /* CONFIG_PPC_INDIRECT_MMIO */
+#define iowa_ioremap NULL
+#endif /* !CONFIG_PPC_INDIRECT_MMIO */
 
 /* Enable IO workaround */
 static void io_workaround_init(void)

arch/powerpc/kernel/io.c

@@ -25,6 +25,9 @@
 #include <asm/firmware.h>
 #include <asm/bug.h>
 
+/* See definition in io.h */
+bool isa_io_special;
+
 void _insb(const volatile u8 __iomem *port, void *buf, long count)
 {
 	u8 *tbuf = buf;

arch/powerpc/kernel/legacy_serial.c

@@ -99,7 +99,7 @@ static int __init add_legacy_port(struct device_node *np, int want_index,
 		legacy_serial_count = index + 1;
 
 	/* Check if there is a port who already claimed our slot */
-	if (legacy_serial_infos[index].np != 0) {
+	if (legacy_serial_infos[index].np != NULL) {
 		/* if we still have some room, move it, else override */
 		if (legacy_serial_count < MAX_LEGACY_SERIAL_PORTS) {
 			printk(KERN_DEBUG "Moved legacy port %d -> %d\n",
@@ -152,7 +152,7 @@ static int __init add_legacy_soc_port(struct device_node *np,
 				      struct device_node *soc_dev)
 {
 	u64 addr;
-	const u32 *addrp;
+	const __be32 *addrp;
 	upf_t flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_SHARE_IRQ
 		| UPF_FIXED_PORT;
 	struct device_node *tsi = of_get_parent(np);
@@ -221,14 +221,19 @@ static int __init add_legacy_isa_port(struct device_node *np,
 	/* Translate ISA address. If it fails, we still register the port
 	 * with no translated address so that it can be picked up as an IO
 	 * port later by the serial driver
+	 *
+	 * Note: Don't even try on P8 lpc, we know it's not directly mapped
 	 */
-	taddr = of_translate_address(np, reg);
-	if (taddr == OF_BAD_ADDR)
+	if (!of_device_is_compatible(isa_brg, "ibm,power8-lpc")) {
+		taddr = of_translate_address(np, reg);
+		if (taddr == OF_BAD_ADDR)
+			taddr = 0;
+	} else
 		taddr = 0;
 
 	/* Add port, irq will be dealt with later */
-	return add_legacy_port(np, index, UPIO_PORT, be32_to_cpu(reg[1]), taddr,
-			       NO_IRQ, UPF_BOOT_AUTOCONF, 0);
+	return add_legacy_port(np, index, UPIO_PORT, be32_to_cpu(reg[1]),
+			       taddr, NO_IRQ, UPF_BOOT_AUTOCONF, 0);
 
 }
 
@@ -237,7 +242,7 @@ static int __init add_legacy_pci_port(struct device_node *np,
 				      struct device_node *pci_dev)
 {
 	u64 addr, base;
-	const u32 *addrp;
+	const __be32 *addrp;
 	unsigned int flags;
 	int iotype, index = -1, lindex = 0;
 
@@ -270,7 +275,7 @@ static int __init add_legacy_pci_port(struct device_node *np,
 	if (iotype == UPIO_MEM)
 		base = addr;
 	else
-		base = addrp[2];
+		base = of_read_number(&addrp[2], 1);
 
 	/* Try to guess an index... If we have subdevices of the pci dev,
 	 * we get to their "reg" property
@@ -307,19 +312,31 @@ static int __init add_legacy_pci_port(struct device_node *np,
 
 static void __init setup_legacy_serial_console(int console)
 {
-	struct legacy_serial_info *info =
-		&legacy_serial_infos[console];
+	struct legacy_serial_info *info = &legacy_serial_infos[console];
+	struct plat_serial8250_port *port = &legacy_serial_ports[console];
 	void __iomem *addr;
 
-	if (info->taddr == 0)
-		return;
-	addr = ioremap(info->taddr, 0x1000);
-	if (addr == NULL)
-		return;
+	/* Check if a translated MMIO address has been found */
+	if (info->taddr) {
+		addr = ioremap(info->taddr, 0x1000);
+		if (addr == NULL)
+			return;
+		udbg_uart_init_mmio(addr, 1);
+	} else {
+		/* Check if it's PIO and we support untranslated PIO */
+		if (port->iotype == UPIO_PORT && isa_io_special)
+			udbg_uart_init_pio(port->iobase, 1);
+		else
+			return;
+	}
+
+	/* Try to query the current speed */
 	if (info->speed == 0)
-		info->speed = udbg_probe_uart_speed(addr, info->clock);
+		info->speed = udbg_probe_uart_speed(info->clock);
+
+	/* Set it up */
 	DBG("default console speed = %d\n", info->speed);
-	udbg_init_uart(addr, info->speed, info->clock);
+	udbg_uart_setup(info->speed, info->clock);
 }
 
 /*
@@ -367,10 +384,13 @@ void __init find_legacy_serial_ports(void)
 	/* Next, fill our array with ISA ports */
 	for_each_node_by_type(np, "serial") {
 		struct device_node *isa = of_get_parent(np);
-		if (isa && !strcmp(isa->name, "isa")) {
-			index = add_legacy_isa_port(np, isa);
-			if (index >= 0 && np == stdout)
-				legacy_serial_console = index;
+		if (isa && (!strcmp(isa->name, "isa") ||
+			    !strcmp(isa->name, "lpc"))) {
+			if (of_device_is_available(np)) {
+				index = add_legacy_isa_port(np, isa);
+				if (index >= 0 && np == stdout)
+					legacy_serial_console = index;
+			}
 		}
 		of_node_put(isa);
 	}

arch/powerpc/kernel/misc_32.S

@@ -327,8 +327,9 @@ END_FTR_SECTION_IFSET(CPU_FTR_UNIFIED_ID_CACHE)
  *
  * flush_icache_range(unsigned long start, unsigned long stop)
  */
-_KPROBE(__flush_icache_range)
+_KPROBE(flush_icache_range)
 BEGIN_FTR_SECTION
+	isync
 	blr				/* for 601, do nothing */
 END_FTR_SECTION_IFSET(CPU_FTR_COHERENT_ICACHE)
 	li	r5,L1_CACHE_BYTES-1

arch/powerpc/kernel/misc_64.S

@@ -67,8 +67,10 @@ PPC64_CACHES:
  *   flush all bytes from start through stop-1 inclusive
  */
 
-_KPROBE(__flush_icache_range)
-
+_KPROBE(flush_icache_range)
+BEGIN_FTR_SECTION
+	blr
+END_FTR_SECTION_IFSET(CPU_FTR_COHERENT_ICACHE)
 /*
  * Flush the data cache to memory 
  * 
@@ -247,6 +249,37 @@ _GLOBAL(__bswapdi2)
 	blr
 
 #if defined(CONFIG_PPC_PMAC) || defined(CONFIG_PPC_MAPLE)
+
+_GLOBAL(rmci_on)
+	sync
+	isync
+	li	r3,0x100
+	rldicl	r3,r3,32,0
+	mfspr	r5,SPRN_HID4
+	or	r5,r5,r3
+	sync
+	mtspr	SPRN_HID4,r5
+	isync
+	slbia
+	isync
+	sync
+	blr
+
+_GLOBAL(rmci_off)
+	sync
+	isync
+	li	r3,0x100
+	rldicl	r3,r3,32,0
+	mfspr	r5,SPRN_HID4
+	andc	r5,r5,r3
+	sync
+	mtspr	SPRN_HID4,r5
+	isync
+	slbia
+	isync
+	sync
+	blr
+
 /*
  * Do an IO access in real mode
  */
@@ -416,19 +449,6 @@ _GLOBAL(scom970_write)
 	blr
 #endif /* CONFIG_CPU_FREQ_PMAC64 || CONFIG_CPU_FREQ_MAPLE */
 
-
-/*
- * disable_kernel_fp()
- * Disable the FPU.
- */
-_GLOBAL(disable_kernel_fp)
-	mfmsr	r3
-	rldicl	r0,r3,(63-MSR_FP_LG),1
-	rldicl	r3,r0,(MSR_FP_LG+1),0
-	mtmsrd	r3			/* disable use of fpu now */
-	isync
-	blr
-
 /* kexec_wait(phys_cpu)
  *
  * wait for the flag to change, indicating this kernel is going away but

arch/powerpc/kernel/paca.c

@@ -34,10 +34,10 @@ extern unsigned long __toc_start;
  */
 struct lppaca lppaca[] = {
 	[0 ... (NR_LPPACAS-1)] = {
-		.desc = 0xd397d781,	/* "LpPa" */
-		.size = sizeof(struct lppaca),
+		.desc = cpu_to_be32(0xd397d781),	/* "LpPa" */
+		.size = cpu_to_be16(sizeof(struct lppaca)),
 		.fpregs_in_use = 1,
-		.slb_count = 64,
+		.slb_count = cpu_to_be16(64),
 		.vmxregs_in_use = 0,
 		.page_ins = 0,
 	},
@@ -101,8 +101,8 @@ static inline void free_lppacas(void) { }
  */
 struct slb_shadow slb_shadow[] __cacheline_aligned = {
 	[0 ... (NR_CPUS-1)] = {
-		.persistent = SLB_NUM_BOLTED,
-		.buffer_length = sizeof(struct slb_shadow),
+		.persistent = cpu_to_be32(SLB_NUM_BOLTED),
+		.buffer_length = cpu_to_be32(sizeof(struct slb_shadow)),
 	},
 };
 

arch/powerpc/kernel/pci-common.c

@@ -306,7 +306,7 @@ static struct resource *__pci_mmap_make_offset(struct pci_dev *dev,
 	unsigned long io_offset = 0;
 	int i, res_bit;
 
-	if (hose == 0)
+	if (hose == NULL)
 		return NULL;		/* should never happen */
 
 	/* If memory, add on the PCI bridge address offset */
@@ -667,7 +667,7 @@ void pci_resource_to_user(const struct pci_dev *dev, int bar,
 void pci_process_bridge_OF_ranges(struct pci_controller *hose,
 				  struct device_node *dev, int primary)
 {
-	const u32 *ranges;
+	const __be32 *ranges;
 	int rlen;
 	int pna = of_n_addr_cells(dev);
 	int np = pna + 5;
@@ -687,7 +687,7 @@ void pci_process_bridge_OF_ranges(struct pci_controller *hose,
 	/* Parse it */
 	while ((rlen -= np * 4) >= 0) {
 		/* Read next ranges element */
-		pci_space = ranges[0];
+		pci_space = of_read_number(ranges, 1);
 		pci_addr = of_read_number(ranges + 1, 2);
 		cpu_addr = of_translate_address(dev, ranges + 3);
 		size = of_read_number(ranges + pna + 3, 2);
@@ -704,7 +704,7 @@ void pci_process_bridge_OF_ranges(struct pci_controller *hose,
 		/* Now consume following elements while they are contiguous */
 		for (; rlen >= np * sizeof(u32);
 		     ranges += np, rlen -= np * 4) {
-			if (ranges[0] != pci_space)
+			if (of_read_number(ranges, 1) != pci_space)
 				break;
 			pci_next = of_read_number(ranges + 1, 2);
 			cpu_next = of_translate_address(dev, ranges + 3);
@@ -1055,8 +1055,7 @@ void pcibios_fixup_bus(struct pci_bus *bus)
 	 * bases. This is -not- called when generating the PCI tree from
 	 * the OF device-tree.
 	 */
-	if (bus->self != NULL)
-		pci_read_bridge_bases(bus);
+	pci_read_bridge_bases(bus);
 
 	/* Now fixup the bus bus */
 	pcibios_setup_bus_self(bus);
@@ -1578,7 +1577,7 @@ fake_pci_bus(struct pci_controller *hose, int busnr)
 {
 	static struct pci_bus bus;
 
-	if (hose == 0) {
+	if (hose == NULL) {
 		printk(KERN_ERR "Can't find hose for PCI bus %d!\n", busnr);
 	}
 	bus.number = busnr;

arch/powerpc/kernel/pci_64.c

@@ -109,7 +109,7 @@ int pcibios_unmap_io_space(struct pci_bus *bus)
 	hose = pci_bus_to_host(bus);
 
 	/* Check if we have IOs allocated */
-	if (hose->io_base_alloc == 0)
+	if (hose->io_base_alloc == NULL)
 		return 0;
 
 	pr_debug("IO unmapping for PHB %s\n", hose->dn->full_name);
@@ -272,7 +272,7 @@ static void quirk_radeon_32bit_msi(struct pci_dev *dev)
 	struct pci_dn *pdn = pci_get_pdn(dev);
 
 	if (pdn)
-		pdn->force_32bit_msi = 1;
+		pdn->force_32bit_msi = true;
 }
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x68f2, quirk_radeon_32bit_msi);
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0xaa68, quirk_radeon_32bit_msi);

arch/powerpc/kernel/pci_dn.c

@@ -47,9 +47,8 @@ struct pci_dn *pci_get_pdn(struct pci_dev *pdev)
 void *update_dn_pci_info(struct device_node *dn, void *data)
 {
 	struct pci_controller *phb = data;
-	const int *type =
-		of_get_property(dn, "ibm,pci-config-space-type", NULL);
-	const u32 *regs;
+	const __be32 *type = of_get_property(dn, "ibm,pci-config-space-type", NULL);
+	const __be32 *regs;
 	struct pci_dn *pdn;
 
 	pdn = zalloc_maybe_bootmem(sizeof(*pdn), GFP_KERNEL);
@@ -63,12 +62,14 @@ void *update_dn_pci_info(struct device_node *dn, void *data)
 #endif
 	regs = of_get_property(dn, "reg", NULL);
 	if (regs) {
+		u32 addr = of_read_number(regs, 1);
+
 		/* First register entry is addr (00BBSS00)  */
-		pdn->busno = (regs[0] >> 16) & 0xff;
-		pdn->devfn = (regs[0] >> 8) & 0xff;
+		pdn->busno = (addr >> 16) & 0xff;
+		pdn->devfn = (addr >> 8) & 0xff;
 	}
 
-	pdn->pci_ext_config_space = (type && *type == 1);
+	pdn->pci_ext_config_space = (type && of_read_number(type, 1) == 1);
 	return NULL;
 }
 
@@ -98,12 +99,13 @@ void *traverse_pci_devices(struct device_node *start, traverse_func pre,
 
 	/* We started with a phb, iterate all childs */
 	for (dn = start->child; dn; dn = nextdn) {
-		const u32 *classp;
-		u32 class;
+		const __be32 *classp;
+		u32 class = 0;
 
 		nextdn = NULL;
 		classp = of_get_property(dn, "class-code", NULL);
-		class = classp ? *classp : 0;
+		if (classp)
+			class = of_read_number(classp, 1);
 
 		if (pre && ((ret = pre(dn, data)) != NULL))
 			return ret;

arch/powerpc/kernel/pci_of_scan.c

@@ -24,12 +24,12 @@
  */
 static u32 get_int_prop(struct device_node *np, const char *name, u32 def)
 {
-	const u32 *prop;
+	const __be32 *prop;
 	int len;
 
 	prop = of_get_property(np, name, &len);
 	if (prop && len >= 4)
-		return *prop;
+		return of_read_number(prop, 1);
 	return def;
 }
 
@@ -77,7 +77,7 @@ static void of_pci_parse_addrs(struct device_node *node, struct pci_dev *dev)
 	unsigned int flags;
 	struct pci_bus_region region;
 	struct resource *res;
-	const u32 *addrs;
+	const __be32 *addrs;
 	u32 i;
 	int proplen;
 
@@ -86,14 +86,14 @@ static void of_pci_parse_addrs(struct device_node *node, struct pci_dev *dev)
 		return;
 	pr_debug("    parse addresses (%d bytes) @ %p\n", proplen, addrs);
 	for (; proplen >= 20; proplen -= 20, addrs += 5) {
-		flags = pci_parse_of_flags(addrs[0], 0);
+		flags = pci_parse_of_flags(of_read_number(addrs, 1), 0);
 		if (!flags)
 			continue;
 		base = of_read_number(&addrs[1], 2);
 		size = of_read_number(&addrs[3], 2);
 		if (!size)
 			continue;
-		i = addrs[0] & 0xff;
+		i = of_read_number(addrs, 1) & 0xff;
 		pr_debug("  base: %llx, size: %llx, i: %x\n",
 			 (unsigned long long)base,
 			 (unsigned long long)size, i);
@@ -207,7 +207,7 @@ void of_scan_pci_bridge(struct pci_dev *dev)
 {
 	struct device_node *node = dev->dev.of_node;
 	struct pci_bus *bus;
-	const u32 *busrange, *ranges;
+	const __be32 *busrange, *ranges;
 	int len, i, mode;
 	struct pci_bus_region region;
 	struct resource *res;
@@ -230,9 +230,11 @@ void of_scan_pci_bridge(struct pci_dev *dev)
 		return;
 	}
 
-	bus = pci_find_bus(pci_domain_nr(dev->bus), busrange[0]);
+	bus = pci_find_bus(pci_domain_nr(dev->bus),
+			   of_read_number(busrange, 1));
 	if (!bus) {
-		bus = pci_add_new_bus(dev->bus, dev, busrange[0]);
+		bus = pci_add_new_bus(dev->bus, dev,
+				      of_read_number(busrange, 1));
 		if (!bus) {
 			printk(KERN_ERR "Failed to create pci bus for %s\n",
 			       node->full_name);
@@ -241,7 +243,8 @@ void of_scan_pci_bridge(struct pci_dev *dev)
 	}
 
 	bus->primary = dev->bus->number;
-	pci_bus_insert_busn_res(bus, busrange[0], busrange[1]);
+	pci_bus_insert_busn_res(bus, of_read_number(busrange, 1),
+				of_read_number(busrange+1, 1));
 	bus->bridge_ctl = 0;
 
 	/* parse ranges property */
@@ -254,7 +257,7 @@ void of_scan_pci_bridge(struct pci_dev *dev)
 	}
 	i = 1;
 	for (; len >= 32; len -= 32, ranges += 8) {
-		flags = pci_parse_of_flags(ranges[0], 1);
+		flags = pci_parse_of_flags(of_read_number(ranges, 1), 1);
 		size = of_read_number(&ranges[6], 2);
 		if (flags == 0 || size == 0)
 			continue;

arch/powerpc/kernel/ppc_ksyms.c

@@ -96,7 +96,9 @@ EXPORT_SYMBOL(pci_dram_offset);
 
 EXPORT_SYMBOL(start_thread);
 
+#ifdef CONFIG_PPC_FPU
 EXPORT_SYMBOL(giveup_fpu);
+#endif
 #ifdef CONFIG_ALTIVEC
 EXPORT_SYMBOL(giveup_altivec);
 #endif /* CONFIG_ALTIVEC */
@@ -111,7 +113,6 @@ EXPORT_SYMBOL(giveup_spe);
 #ifndef CONFIG_PPC64
 EXPORT_SYMBOL(flush_instruction_cache);
 #endif
-EXPORT_SYMBOL(__flush_icache_range);
 EXPORT_SYMBOL(flush_dcache_range);
 
 #ifdef CONFIG_SMP

arch/powerpc/kernel/process.c

@@ -74,6 +74,7 @@ struct task_struct *last_task_used_vsx = NULL;
 struct task_struct *last_task_used_spe = NULL;
 #endif
 
+#ifdef CONFIG_PPC_FPU
 /*
  * Make sure the floating-point register state in the
  * the thread_struct is up to date for task tsk.
@@ -107,6 +108,7 @@ void flush_fp_to_thread(struct task_struct *tsk)
 	}
 }
 EXPORT_SYMBOL_GPL(flush_fp_to_thread);
+#endif
 
 void enable_kernel_fp(void)
 {

arch/powerpc/kernel/prom.c

@@ -215,16 +215,16 @@ static void __init check_cpu_pa_features(unsigned long node)
 #ifdef CONFIG_PPC_STD_MMU_64
 static void __init check_cpu_slb_size(unsigned long node)
 {
-	u32 *slb_size_ptr;
+	__be32 *slb_size_ptr;
 
 	slb_size_ptr = of_get_flat_dt_prop(node, "slb-size", NULL);
 	if (slb_size_ptr != NULL) {
-		mmu_slb_size = *slb_size_ptr;
+		mmu_slb_size = be32_to_cpup(slb_size_ptr);
 		return;
 	}
 	slb_size_ptr = of_get_flat_dt_prop(node, "ibm,slb-size", NULL);
 	if (slb_size_ptr != NULL) {
-		mmu_slb_size = *slb_size_ptr;
+		mmu_slb_size = be32_to_cpup(slb_size_ptr);
 	}
 }
 #else
@@ -279,11 +279,11 @@ static void __init check_cpu_feature_properties(unsigned long node)
 {
 	unsigned long i;
 	struct feature_property *fp = feature_properties;
-	const u32 *prop;
+	const __be32 *prop;
 
 	for (i = 0; i < ARRAY_SIZE(feature_properties); ++i, ++fp) {
 		prop = of_get_flat_dt_prop(node, fp->name, NULL);
-		if (prop && *prop >= fp->min_value) {
+		if (prop && be32_to_cpup(prop) >= fp->min_value) {
 			cur_cpu_spec->cpu_features |= fp->cpu_feature;
 			cur_cpu_spec->cpu_user_features |= fp->cpu_user_ftr;
 		}
@@ -295,8 +295,8 @@ static int __init early_init_dt_scan_cpus(unsigned long node,
 					  void *data)
 {
 	char *type = of_get_flat_dt_prop(node, "device_type", NULL);
-	const u32 *prop;
-	const u32 *intserv;
+	const __be32 *prop;
+	const __be32 *intserv;
 	int i, nthreads;
 	unsigned long len;
 	int found = -1;
@@ -324,8 +324,9 @@ static int __init early_init_dt_scan_cpus(unsigned long node,
 		 * version 2 of the kexec param format adds the phys cpuid of
 		 * booted proc.
 		 */
-		if (initial_boot_params->version >= 2) {
-			if (intserv[i] == initial_boot_params->boot_cpuid_phys) {
+		if (be32_to_cpu(initial_boot_params->version) >= 2) {
+			if (be32_to_cpu(intserv[i]) ==
+			    be32_to_cpu(initial_boot_params->boot_cpuid_phys)) {
 				found = boot_cpu_count;
 				found_thread = i;
 			}
@@ -347,9 +348,10 @@ static int __init early_init_dt_scan_cpus(unsigned long node,
 
 	if (found >= 0) {
 		DBG("boot cpu: logical %d physical %d\n", found,
-			intserv[found_thread]);
+			be32_to_cpu(intserv[found_thread]));
 		boot_cpuid = found;
-		set_hard_smp_processor_id(found, intserv[found_thread]);
+		set_hard_smp_processor_id(found,
+			be32_to_cpu(intserv[found_thread]));
 
 		/*
 		 * PAPR defines "logical" PVR values for cpus that
@@ -366,8 +368,8 @@ static int __init early_init_dt_scan_cpus(unsigned long node,
 		 * it uses 0x0f000001.
 		 */
 		prop = of_get_flat_dt_prop(node, "cpu-version", NULL);
-		if (prop && (*prop & 0xff000000) == 0x0f000000)
-			identify_cpu(0, *prop);
+		if (prop && (be32_to_cpup(prop) & 0xff000000) == 0x0f000000)
+			identify_cpu(0, be32_to_cpup(prop));
 
 		identical_pvr_fixup(node);
 	}
@@ -389,7 +391,7 @@ static int __init early_init_dt_scan_cpus(unsigned long node,
 int __init early_init_dt_scan_chosen_ppc(unsigned long node, const char *uname,
 					 int depth, void *data)
 {
-	unsigned long *lprop;
+	unsigned long *lprop; /* All these set by kernel, so no need to convert endian */
 
 	/* Use common scan routine to determine if this is the chosen node */
 	if (early_init_dt_scan_chosen(node, uname, depth, data) == 0)
@@ -454,7 +456,7 @@ static int __init early_init_dt_scan_drconf_memory(unsigned long node)
 	if (dm == NULL || l < sizeof(__be32))
 		return 0;
 
-	n = *dm++;	/* number of entries */
+	n = of_read_number(dm++, 1);	/* number of entries */
 	if (l < (n * (dt_root_addr_cells + 4) + 1) * sizeof(__be32))
 		return 0;
 
@@ -466,7 +468,7 @@ static int __init early_init_dt_scan_drconf_memory(unsigned long node)
 
 	for (; n != 0; --n) {
 		base = dt_mem_next_cell(dt_root_addr_cells, &dm);
-		flags = dm[3];
+		flags = of_read_number(&dm[3], 1);
 		/* skip DRC index, pad, assoc. list index, flags */
 		dm += 4;
 		/* skip this block if the reserved bit is set in flags (0x80)
@@ -591,16 +593,16 @@ static void __init early_reserve_mem_dt(void)
 static void __init early_reserve_mem(void)
 {
 	u64 base, size;
-	u64 *reserve_map;
+	__be64 *reserve_map;
 	unsigned long self_base;
 	unsigned long self_size;
 
-	reserve_map = (u64 *)(((unsigned long)initial_boot_params) +
-					initial_boot_params->off_mem_rsvmap);
+	reserve_map = (__be64 *)(((unsigned long)initial_boot_params) +
+			be32_to_cpu(initial_boot_params->off_mem_rsvmap));
 
 	/* before we do anything, lets reserve the dt blob */
 	self_base = __pa((unsigned long)initial_boot_params);
-	self_size = initial_boot_params->totalsize;
+	self_size = be32_to_cpu(initial_boot_params->totalsize);
 	memblock_reserve(self_base, self_size);
 
 	/* Look for the new "reserved-regions" property in the DT */
@@ -620,15 +622,15 @@ static void __init early_reserve_mem(void)
 	 * Handle the case where we might be booting from an old kexec
 	 * image that setup the mem_rsvmap as pairs of 32-bit values
 	 */
-	if (*reserve_map > 0xffffffffull) {
+	if (be64_to_cpup(reserve_map) > 0xffffffffull) {
 		u32 base_32, size_32;
-		u32 *reserve_map_32 = (u32 *)reserve_map;
+		__be32 *reserve_map_32 = (__be32 *)reserve_map;
 
 		DBG("Found old 32-bit reserve map\n");
 
 		while (1) {
-			base_32 = *(reserve_map_32++);
-			size_32 = *(reserve_map_32++);
+			base_32 = be32_to_cpup(reserve_map_32++);
+			size_32 = be32_to_cpup(reserve_map_32++);
 			if (size_32 == 0)
 				break;
 			/* skip if the reservation is for the blob */
@@ -644,8 +646,8 @@ static void __init early_reserve_mem(void)
 
 	/* Handle the reserve map in the fdt blob if it exists */
 	while (1) {
-		base = *(reserve_map++);
-		size = *(reserve_map++);
+		base = be64_to_cpup(reserve_map++);
+		size = be64_to_cpup(reserve_map++);
 		if (size == 0)
 			break;
 		DBG("reserving: %llx -> %llx\n", base, size);
@@ -795,6 +797,32 @@ struct device_node *of_find_next_cache_node(struct device_node *np)
 	return NULL;
 }
 
+/**
+ * of_get_ibm_chip_id - Returns the IBM "chip-id" of a device
+ * @np: device node of the device
+ *
+ * This looks for a property "ibm,chip-id" in the node or any
+ * of its parents and returns its content, or -1 if it cannot
+ * be found.
+ */
+int of_get_ibm_chip_id(struct device_node *np)
+{
+	of_node_get(np);
+	while(np) {
+		struct device_node *old = np;
+		const __be32 *prop;
+
+		prop = of_get_property(np, "ibm,chip-id", NULL);
+		if (prop) {
+			of_node_put(np);
+			return be32_to_cpup(prop);
+		}
+		np = of_get_parent(np);
+		of_node_put(old);
+	}
+	return -1;
+}
+
 #ifdef CONFIG_PPC_PSERIES
 /*
  * Fix up the uninitialized fields in a new device node:
@@ -878,7 +906,7 @@ static int __init export_flat_device_tree(void)
 	struct dentry *d;
 
 	flat_dt_blob.data = initial_boot_params;
-	flat_dt_blob.size = initial_boot_params->totalsize;
+	flat_dt_blob.size = be32_to_cpu(initial_boot_params->totalsize);
 
 	d = debugfs_create_blob("flat-device-tree", S_IFREG | S_IRUSR,
 				powerpc_debugfs_root, &flat_dt_blob);

arch/powerpc/kernel/prom_init_check.sh

@@ -22,7 +22,8 @@ __secondary_hold_acknowledge __secondary_hold_spinloop __start
 strcmp strcpy strlcpy strlen strncmp strstr logo_linux_clut224
 reloc_got2 kernstart_addr memstart_addr linux_banner _stext
 opal_query_takeover opal_do_takeover opal_enter_rtas opal_secondary_entry
-boot_command_line __prom_init_toc_start __prom_init_toc_end"
+boot_command_line __prom_init_toc_start __prom_init_toc_end
+btext_setup_display"
 
 NM="$1"
 OBJ="$2"

arch/powerpc/kernel/prom_parse.c

@@ -7,28 +7,27 @@
 #include <linux/of_address.h>
 #include <asm/prom.h>
 
-void of_parse_dma_window(struct device_node *dn, const void *dma_window_prop,
-		unsigned long *busno, unsigned long *phys, unsigned long *size)
+void of_parse_dma_window(struct device_node *dn, const __be32 *dma_window,
+			 unsigned long *busno, unsigned long *phys,
+			 unsigned long *size)
 {
-	const u32 *dma_window;
 	u32 cells;
-	const unsigned char *prop;
-
-	dma_window = dma_window_prop;
+	const __be32 *prop;
 
 	/* busno is always one cell */
-	*busno = *(dma_window++);
+	*busno = of_read_number(dma_window, 1);
+	dma_window++;
 
 	prop = of_get_property(dn, "ibm,#dma-address-cells", NULL);
 	if (!prop)
 		prop = of_get_property(dn, "#address-cells", NULL);
 
-	cells = prop ? *(u32 *)prop : of_n_addr_cells(dn);
+	cells = prop ? of_read_number(prop, 1) : of_n_addr_cells(dn);
 	*phys = of_read_number(dma_window, cells);
 
 	dma_window += cells;
 
 	prop = of_get_property(dn, "ibm,#dma-size-cells", NULL);
-	cells = prop ? *(u32 *)prop : of_n_size_cells(dn);
+	cells = prop ? of_read_number(prop, 1) : of_n_size_cells(dn);
 	*size = of_read_number(dma_window, cells);
 }

arch/powerpc/kernel/setup-common.c

@@ -436,7 +436,8 @@ void __init smp_setup_cpu_maps(void)
 	DBG("smp_setup_cpu_maps()\n");
 
 	while ((dn = of_find_node_by_type(dn, "cpu")) && cpu < nr_cpu_ids) {
-		const int *intserv;
+		const __be32 *intserv;
+		__be32 cpu_be;
 		int j, len;
 
 		DBG("  * %s...\n", dn->full_name);
@@ -450,15 +451,17 @@ void __init smp_setup_cpu_maps(void)
 		} else {
 			DBG("    no ibm,ppc-interrupt-server#s -> 1 thread\n");
 			intserv = of_get_property(dn, "reg", NULL);
-			if (!intserv)
-				intserv = &cpu;	/* assume logical == phys */
+			if (!intserv) {
+				cpu_be = cpu_to_be32(cpu);
+				intserv = &cpu_be;	/* assume logical == phys */
+			}
 		}
 
 		for (j = 0; j < nthreads && cpu < nr_cpu_ids; j++) {
 			DBG("    thread %d -> cpu %d (hard id %d)\n",
-			    j, cpu, intserv[j]);
+			    j, cpu, be32_to_cpu(intserv[j]));
 			set_cpu_present(cpu, true);
-			set_hard_smp_processor_id(cpu, intserv[j]);
+			set_hard_smp_processor_id(cpu, be32_to_cpu(intserv[j]));
 			set_cpu_possible(cpu, true);
 			cpu++;
 		}

arch/powerpc/kernel/setup_32.c

@@ -38,6 +38,7 @@
 #include <asm/serial.h>
 #include <asm/udbg.h>
 #include <asm/mmu_context.h>
+#include <asm/epapr_hcalls.h>
 
 #include "setup.h"
 
@@ -128,6 +129,8 @@ notrace void __init machine_init(u64 dt_ptr)
 	/* Do some early initialization based on the flat device tree */
 	early_init_devtree(__va(dt_ptr));
 
+	epapr_paravirt_early_init();
+
 	early_init_mmu();
 
 	probe_machine();
@@ -326,5 +329,4 @@ void __init setup_arch(char **cmdline_p)
 
 	/* Initialize the MMU context management stuff */
 	mmu_context_init();
-
 }

arch/powerpc/kernel/signal_32.c

@@ -436,7 +436,10 @@ static int save_user_regs(struct pt_regs *regs, struct mcontext __user *frame,
 	 * use altivec. Since VSCR only contains 32 bits saved in the least
 	 * significant bits of a vector, we "cheat" and stuff VRSAVE in the
 	 * most significant bits of that same vector. --BenH
+	 * Note that the current VRSAVE value is in the SPR at this point.
 	 */
+	if (cpu_has_feature(CPU_FTR_ALTIVEC))
+		current->thread.vrsave = mfspr(SPRN_VRSAVE);
 	if (__put_user(current->thread.vrsave, (u32 __user *)&frame->mc_vregs[32]))
 		return 1;
 #endif /* CONFIG_ALTIVEC */
@@ -557,6 +560,8 @@ static int save_tm_user_regs(struct pt_regs *regs,
 	 * significant bits of a vector, we "cheat" and stuff VRSAVE in the
 	 * most significant bits of that same vector. --BenH
 	 */
+	if (cpu_has_feature(CPU_FTR_ALTIVEC))
+		current->thread.vrsave = mfspr(SPRN_VRSAVE);
 	if (__put_user(current->thread.vrsave,
 		       (u32 __user *)&frame->mc_vregs[32]))
 		return 1;
@@ -696,6 +701,8 @@ static long restore_user_regs(struct pt_regs *regs,
 	/* Always get VRSAVE back */
 	if (__get_user(current->thread.vrsave, (u32 __user *)&sr->mc_vregs[32]))
 		return 1;
+	if (cpu_has_feature(CPU_FTR_ALTIVEC))
+		mtspr(SPRN_VRSAVE, current->thread.vrsave);
 #endif /* CONFIG_ALTIVEC */
 	if (copy_fpr_from_user(current, &sr->mc_fregs))
 		return 1;
@@ -809,6 +816,8 @@ static long restore_tm_user_regs(struct pt_regs *regs,
 	    __get_user(current->thread.transact_vrsave,
 		       (u32 __user *)&tm_sr->mc_vregs[32]))
 		return 1;
+	if (cpu_has_feature(CPU_FTR_ALTIVEC))
+		mtspr(SPRN_VRSAVE, current->thread.vrsave);
 #endif /* CONFIG_ALTIVEC */
 
 	regs->msr &= ~(MSR_FP | MSR_FE0 | MSR_FE1);