提交 33ef4784 编写于 作者: Y Yang Shi 提交者: Caspar Zhang

alios: mm: memcontrol: make distance between wmark_low and wmark_high configurable

Introduce a new interface, wmark_scale_factor, which defines the
distance between wmark_high and wmark_low.  The unit is in fractions of
10,000. The default value of 50 means the distance between wmark_high
and wmark_low is 0.5% of the max limit of the cgroup.  The maximum value
is 1000, or 10% of the max limit.

The distance between wmark_low and wmark_high have impact on how hard
memcg kswapd would reclaim.
Reviewed-by: NGavin Shan <shan.gavin@linux.alibaba.com>
Reviewed-by: NXunlei Pang <xlpang@linux.alibaba.com>
Signed-off-by: NYang Shi <yang.shi@linux.alibaba.com>
上级 e10c247b
......@@ -1116,6 +1116,15 @@ PAGE_SIZE multiple when read back.
Memory usage low water mark, which means the available memory is ok.
For details, please refer to the above wmark_ratio section.
memory.wmark_scale_factor
A read-write single value file which exists on non-root cgroups.
The default is 50.
The gap between wmark_low and wmark_high. The unit is in fractions
of 10,000. The default value of 50 means the distance between wmark_high
and wmark_low is 0.5% of the max limit of the cgroup. The maximum value
is 1000, or 10% of max limit.
memory.oom.group
A read-write single value file which exists on non-root
cgroups. The default value is "0".
......
......@@ -93,6 +93,10 @@ Brief summary of control files.
read-only)
memory.wmark_high # high limit (memory usge high water mark,
read-only)
memory.wmark_scale_factor # the gap between wmark_low and wmark_high,
percentage of max limit, default is 50 or
0.5% of max limit. The max value is 1000 or
10% of max limit.
1. History
......
......@@ -292,6 +292,7 @@ struct mem_cgroup {
unsigned int wmark_ratio;
struct work_struct wmark_work;
unsigned int wmark_scale_factor;
#ifdef CONFIG_MEMCG_KMEM
/* Index in the kmem_cache->memcg_params.memcg_caches array */
......
......@@ -2948,10 +2948,19 @@ static void setup_memcg_wmark(struct mem_cgroup *memcg)
unsigned long max = memcg->high > memcg->memory.max ?
memcg->memory.max : memcg->high;
unsigned int wmark_ratio = memcg->wmark_ratio;
unsigned int wmark_scale_factor = memcg->wmark_scale_factor;
unsigned long gap;
if (wmark_ratio) {
high_wmark = (max * wmark_ratio) / 100;
low_wmark = high_wmark - (high_wmark >> 8);
/*
* Set the memcg watermark distance according to the
* scale factor in proportion to max limit.
*/
gap = mult_frac(max, wmark_scale_factor, 10000);
low_wmark = high_wmark - gap;
page_counter_set_wmark_low(&memcg->memory, low_wmark);
page_counter_set_wmark_high(&memcg->memory, high_wmark);
......@@ -3791,6 +3800,42 @@ static ssize_t memory_wmark_ratio_write(struct kernfs_open_file *of,
return nbytes;
}
static int memory_wmark_scale_factor_show(struct seq_file *m, void *v)
{
struct mem_cgroup *memcg = mem_cgroup_from_css(seq_css(m));
unsigned int wmark_scale_factor;
wmark_scale_factor = READ_ONCE(memcg->wmark_scale_factor);
seq_printf(m, "%d\n", wmark_scale_factor);
return 0;
}
static ssize_t memory_wmark_scale_factor_write(struct kernfs_open_file *of,
char *buf, size_t nbytes, loff_t off)
{
struct mem_cgroup *memcg = mem_cgroup_from_css(of_css(of));
int ret, wmark_scale_factor;
buf = strstrip(buf);
if (!buf)
return -EINVAL;
ret = kstrtouint(buf, 0, &wmark_scale_factor);
if (ret)
return ret;
if (wmark_scale_factor > 1000 || wmark_scale_factor < 1)
return -EINVAL;
xchg(&memcg->wmark_scale_factor, wmark_scale_factor);
setup_memcg_wmark(memcg);
return nbytes;
}
static void __mem_cgroup_threshold(struct mem_cgroup *memcg, bool swap)
{
struct mem_cgroup_threshold_ary *t;
......@@ -4516,6 +4561,12 @@ static struct cftype mem_cgroup_legacy_files[] = {
.private = MEMFILE_PRIVATE(_MEM, WMARK_LOW_LIMIT),
.read_u64 = mem_cgroup_read_u64,
},
{
.name = "wmark_scale_factor",
.flags = CFTYPE_NOT_ON_ROOT,
.seq_show = memory_wmark_scale_factor_show,
.write = memory_wmark_scale_factor_write,
},
{
.name = "force_empty",
.write = mem_cgroup_force_empty_write,
......@@ -4817,6 +4868,9 @@ mem_cgroup_css_alloc(struct cgroup_subsys_state *parent_css)
memcg->swappiness = mem_cgroup_swappiness(parent);
memcg->oom_kill_disable = parent->oom_kill_disable;
memcg->wmark_ratio = parent->wmark_ratio;
/* Default gap is 0.5% max limit */
memcg->wmark_scale_factor = parent->wmark_scale_factor ?
: 50;
}
if (parent && parent->use_hierarchy) {
memcg->use_hierarchy = true;
......@@ -6066,6 +6120,12 @@ static struct cftype memory_files[] = {
.flags = CFTYPE_NOT_ON_ROOT,
.seq_show = memory_wmark_low_show,
},
{
.name = "wmark_scale_factor",
.flags = CFTYPE_NOT_ON_ROOT,
.seq_show = memory_wmark_scale_factor_show,
.write = memory_wmark_scale_factor_write,
},
{
.name = "events",
.flags = CFTYPE_NOT_ON_ROOT,
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册