提交 0a924578 编写于 作者: P Peter P Waskiewicz Jr 提交者: David S. Miller

ixgbe: Fix RSC completion delay causing Rx interrupts to stop

When a user disables interrupt throttling with ethtool on 82599 devices,
the interrupt timer may not be re-enabled if hardware RSC is running.  The
RSC completions in hardware don't complete before the next ITR event tries
to fire, so the ITR timer never gets re-armed.  This patch increases the
amount of time between interrupts when throttling is disabled (rx-usecs =
0) when the hardware RSC deature is enabled.
Signed-off-by: NPeter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
上级 0c19d6af
......@@ -96,6 +96,8 @@
#define IXGBE_TX_FLAGS_VLAN_PRIO_MASK 0x0000e000
#define IXGBE_TX_FLAGS_VLAN_SHIFT 16
#define IXGBE_MAX_RSC_INT_RATE 162760
/* wrapper around a pointer to a socket buffer,
* so a DMA handle can be stored along with the buffer */
struct ixgbe_tx_buffer {
......
......@@ -1975,7 +1975,10 @@ static int ixgbe_set_coalesce(struct net_device *netdev,
* any other value means disable eitr, which is best
* served by setting the interrupt rate very high
*/
adapter->eitr_param = IXGBE_MAX_INT_RATE;
if (adapter->flags2 & IXGBE_FLAG2_RSC_ENABLED)
adapter->eitr_param = IXGBE_MAX_RSC_INT_RATE;
else
adapter->eitr_param = IXGBE_MAX_INT_RATE;
adapter->itr_setting = 0;
}
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册