ixgbe: Fix usage of second flags bitmap when using LRO/RSC

A second set of feature flag bits was added, and the hardware RSC engine
flags were moved there.  However, the code itself didn't make the move
completely to use the new bitmap.
Signed-off-by: NPeter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>
Acked-by: NMallikarjuna R Chilakala <mallikarjuna.chilakala@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

drivers/net/ixgbe/ixgbe_ethtool.c

@@ -1999,13 +1999,13 @@ static int ixgbe_set_flags(struct net_device *netdev, u32 data)
 
 	ethtool_op_set_flags(netdev, data);
 
-	if (!(adapter->flags & IXGBE_FLAG2_RSC_CAPABLE))
+	if (!(adapter->flags2 & IXGBE_FLAG2_RSC_CAPABLE))
 		return 0;
 
 	/* if state changes we need to update adapter->flags and reset */
 	if ((!!(data & ETH_FLAG_LRO)) != 
-	    (!!(adapter->flags & IXGBE_FLAG2_RSC_ENABLED))) {
-		adapter->flags ^= IXGBE_FLAG2_RSC_ENABLED;
+	    (!!(adapter->flags2 & IXGBE_FLAG2_RSC_ENABLED))) {
+		adapter->flags2 ^= IXGBE_FLAG2_RSC_ENABLED;
 		if (netif_running(netdev))
 			ixgbe_reinit_locked(adapter);
 		else

drivers/net/ixgbe/ixgbe_main.c

@@ -780,7 +780,7 @@ static bool ixgbe_clean_rx_irq(struct ixgbe_q_vector *q_vector,
 		prefetch(next_rxd);
 		cleaned_count++;
 
-		if (adapter->flags & IXGBE_FLAG2_RSC_CAPABLE)
+		if (adapter->flags2 & IXGBE_FLAG2_RSC_CAPABLE)
 			rsc_count = ixgbe_get_rsc_count(rx_desc);
 
 		if (rsc_count) {
@@ -2036,7 +2036,7 @@ static void ixgbe_configure_rx(struct ixgbe_adapter *adapter)
 			IXGBE_WRITE_REG(hw, IXGBE_PSRTYPE(0), psrtype);
 		}
 	} else {
-		if (!(adapter->flags & IXGBE_FLAG2_RSC_ENABLED) &&
+		if (!(adapter->flags2 & IXGBE_FLAG2_RSC_ENABLED) &&
 		    (netdev->mtu <= ETH_DATA_LEN))
 			rx_buf_len = MAXIMUM_ETHERNET_VLAN_SIZE;
 		else
@@ -2165,7 +2165,7 @@ static void ixgbe_configure_rx(struct ixgbe_adapter *adapter)
 		IXGBE_WRITE_REG(hw, IXGBE_RDRXCTL, rdrxctl);
 	}
 
-	if (adapter->flags & IXGBE_FLAG2_RSC_ENABLED) {
+	if (adapter->flags2 & IXGBE_FLAG2_RSC_ENABLED) {
 		/* Enable 82599 HW-RSC */
 		for (i = 0; i < adapter->num_rx_queues; i++) {
 			j = adapter->rx_ring[i].reg_idx;
@@ -3812,8 +3812,8 @@ static int __devinit ixgbe_sw_init(struct ixgbe_adapter *adapter)
 		adapter->max_msix_q_vectors = MAX_MSIX_Q_VECTORS_82598;
 	} else if (hw->mac.type == ixgbe_mac_82599EB) {
 		adapter->max_msix_q_vectors = MAX_MSIX_Q_VECTORS_82599;
-		adapter->flags |= IXGBE_FLAG2_RSC_CAPABLE;
-		adapter->flags |= IXGBE_FLAG2_RSC_ENABLED;
+		adapter->flags2 |= IXGBE_FLAG2_RSC_CAPABLE;
+		adapter->flags2 |= IXGBE_FLAG2_RSC_ENABLED;
 		adapter->flags |= IXGBE_FLAG_FDIR_HASH_CAPABLE;
 		adapter->ring_feature[RING_F_FDIR].indices =
 		                                         IXGBE_MAX_FDIR_INDICES;
@@ -5618,7 +5618,7 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev,
 	if (pci_using_dac)
 		netdev->features |= NETIF_F_HIGHDMA;
 
-	if (adapter->flags & IXGBE_FLAG2_RSC_ENABLED)
+	if (adapter->flags2 & IXGBE_FLAG2_RSC_ENABLED)
 		netdev->features |= NETIF_F_LRO;
 
 	/* make sure the EEPROM is good */