Kconfig 12.3 KB
Newer Older
1
#
2
# platform-neutral GPIO infrastructure and expanders
3 4
#

M
Michael Buesch 已提交
5
config ARCH_WANT_OPTIONAL_GPIOLIB
6
	bool
M
Michael Buesch 已提交
7 8 9 10 11 12 13 14 15 16 17
	help
	  Select this config option from the architecture Kconfig, if
	  it is possible to use gpiolib on the architecture, but let the
	  user decide whether to actually build it or not.
	  Select this instead of ARCH_REQUIRE_GPIOLIB, if your architecture does
	  not depend on GPIOs being available, but rather let the user
	  decide whether he needs it or not.

config ARCH_REQUIRE_GPIOLIB
	bool
	select GPIOLIB
18 19 20 21
	help
	  Platforms select gpiolib if they use this infrastructure
	  for all their GPIOs, usually starting with ones integrated
	  into SOC processors.
M
Michael Buesch 已提交
22 23 24 25 26 27 28 29 30 31 32 33 34 35 36
	  Selecting this from the architecture code will cause the gpiolib
	  code to always get built in.



menuconfig GPIOLIB
	bool "GPIO Support"
	depends on ARCH_WANT_OPTIONAL_GPIOLIB || ARCH_REQUIRE_GPIOLIB
	select GENERIC_GPIO
	help
	  This enables GPIO support through the generic GPIO library.
	  You only need to enable this, if you also want to enable
	  one or more of the GPIO expansion card drivers below.

	  If unsure, say N.
37

M
Michael Buesch 已提交
38
if GPIOLIB
39 40 41 42 43 44

config DEBUG_GPIO
	bool "Debug GPIO calls"
	depends on DEBUG_KERNEL
	help
	  Say Y here to add some extra checks and diagnostics to GPIO calls.
45 46 47
	  These checks help ensure that GPIOs have been properly initialized
	  before they are used, and that sleeping calls are not made from
	  non-sleeping contexts.  They can make bitbanged serial protocols
48 49 50
	  slower.  The diagnostics help catch the type of setup errors
	  that are most common when setting up new platforms or boards.

D
David Brownell 已提交
51 52 53 54 55 56 57 58 59 60 61 62 63 64 65
config GPIO_SYSFS
	bool "/sys/class/gpio/... (sysfs interface)"
	depends on SYSFS && EXPERIMENTAL
	help
	  Say Y here to add a sysfs interface for GPIOs.

	  This is mostly useful to work around omissions in a system's
	  kernel support.  Those are common in custom and semicustom
	  hardware assembled using standard kernels with a minimum of
	  custom patches.  In those cases, userspace code may import
	  a given GPIO from the kernel, if no kernel driver requested it.

	  Kernel drivers may also request that a particular GPIO be
	  exported to userspace; this can be useful when debugging.

66 67
# put expanders in the right section, in alphabetical order

68 69 70
config GPIO_MAX730X
	tristate

71 72
comment "Memory mapped GPIO expanders:"

73 74 75 76 77
config GPIO_BASIC_MMIO
	tristate "Basic memory-mapped GPIO controllers support"
	help
	  Say yes here to support basic memory-mapped GPIO controllers.

78 79 80 81 82 83
config GPIO_IT8761E
	tristate "IT8761E GPIO support"
	depends on GPIOLIB
	help
	  Say yes here to support GPIO functionality of IT8761E super I/O chip.

84 85 86 87 88 89
config GPIO_PL061
	bool "PrimeCell PL061 GPIO support"
	depends on ARM_AMBA
	help
	  Say yes here to support the PrimeCell PL061 GPIO device

90 91
config GPIO_XILINX
	bool "Xilinx GPIO support"
92
	depends on PPC_OF || MICROBLAZE
93 94 95
	help
	  Say yes here to support the Xilinx FPGA GPIO device

96 97 98 99 100 101
config GPIO_VR41XX
	tristate "NEC VR4100 series General-purpose I/O Uint support"
	depends on CPU_VR41XX
	help
	  Say yes here to support the NEC VR4100 series General-purpose I/O Uint

102
config GPIO_SCH
103
	tristate "Intel SCH/TunnelCreek GPIO"
104
	depends on GPIOLIB && PCI && X86
105
	select MFD_CORE
106 107
	select LPC_SCH
	help
108 109
	  Say yes here to support GPIO interface on Intel Poulsbo SCH
	  or Intel Tunnel Creek processor.
110 111 112 113 114 115
	  The Intel SCH contains a total of 14 GPIO pins. Ten GPIOs are
	  powered by the core power rail and are turned off during sleep
	  modes (S3 and higher). The remaining four GPIOs are powered by
	  the Intel SCH suspend power supply. These GPIOs remain
	  active during S3. The suspend powered GPIOs can be used to wake the
	  system from the Suspend-to-RAM state.
116 117
	  The Intel Tunnel Creek processor has 5 GPIOs powered by the
	  core power rail and 9 from suspend power supply.
118 119 120 121

	  This driver can also be built as a module. If so, the module
	  will be called sch-gpio.

D
Daniel Drake 已提交
122 123
config GPIO_VX855
	tristate "VIA VX855/VX875 GPIO"
124
	depends on GPIOLIB && MFD_SUPPORT && PCI
D
Daniel Drake 已提交
125 126 127 128 129 130 131 132 133
	select MFD_CORE
	select MFD_VX855
	help
	  Support access to the VX855/VX875 GPIO lines through the gpio library.

	  This driver provides common support for accessing the device,
	  additional drivers must be enabled in order to use the
	  functionality of the device.

134 135
comment "I2C GPIO expanders:"

136 137 138 139 140 141 142
config GPIO_MAX7300
	tristate "Maxim MAX7300 GPIO expander"
	depends on I2C
	select GPIO_MAX730X
	help
	  GPIO driver for Maxim MAX7301 I2C-based GPIO expander.

E
Eric Miao 已提交
143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161
config GPIO_MAX732X
	tristate "MAX7319, MAX7320-7327 I2C Port Expanders"
	depends on I2C
	help
	  Say yes here to support the MAX7319, MAX7320-7327 series of I2C
	  Port Expanders. Each IO port on these chips has a fixed role of
	  Input (designated by 'I'), Push-Pull Output ('O'), or Open-Drain
	  Input and Output (designed by 'P'). The combinations are listed
	  below:

	  8 bits:	max7319 (8I), max7320 (8O), max7321 (8P),
		  	max7322 (4I4O), max7323 (4P4O)

	  16 bits:	max7324 (8I8O), max7325 (8P8O),
		  	max7326 (4I12O), max7327 (4P12O)

	  Board setup code must specify the model to use, and the start
	  number for these GPIOs.

162 163 164 165 166 167 168
config GPIO_MAX732X_IRQ
	bool "Interrupt controller support for MAX732x"
	depends on GPIO_MAX732X=y && GENERIC_HARDIRQS
	help
	  Say yes here to enable the max732x to be used as an interrupt
	  controller. It requires the driver to be built in the kernel.

169
config GPIO_PCA953X
170
	tristate "PCA953x, PCA955x, TCA64xx, and MAX7310 I/O ports"
171 172
	depends on I2C
	help
173 174 175 176 177 178
	  Say yes here to provide access to several register-oriented
	  SMBus I/O expanders, made mostly by NXP or TI.  Compatible
	  models include:

	  4 bits:	pca9536, pca9537

179 180
	  8 bits:	max7310, pca9534, pca9538, pca9554, pca9557,
	  		tca6408
181

182
	  16 bits:	pca9535, pca9539, pca9555, tca6416
183 184

	  This driver can also be built as a module.  If so, the module
185
	  will be called pca953x.
186

187 188 189 190 191 192 193
config GPIO_PCA953X_IRQ
	bool "Interrupt controller support for PCA953x"
	depends on GPIO_PCA953X=y
	help
	  Say yes here to enable the pca953x to be used as an interrupt
	  controller. It requires the driver to be built in the kernel.

194
config GPIO_PCF857X
195
	tristate "PCF857x, PCA{85,96}7x, and MAX732[89] I2C GPIO expanders"
196 197 198 199 200 201 202 203
	depends on I2C
	help
	  Say yes here to provide access to most "quasi-bidirectional" I2C
	  GPIO expanders used for additional digital outputs or inputs.
	  Most of these parts are from NXP, though TI is a second source for
	  some of them.  Compatible models include:

	  8 bits:   pcf8574, pcf8574a, pca8574, pca8574a,
204 205
	            pca9670, pca9672, pca9674, pca9674a,
	  	    max7328, max7329
206 207 208 209 210 211 212 213 214 215 216 217

	  16 bits:  pcf8575, pcf8575c, pca8575,
	            pca9671, pca9673, pca9675

	  Your board setup code will need to declare the expanders in
	  use, and assign numbers to the GPIOs they expose.  Those GPIOs
	  can then be used from drivers and other kernel code, just like
	  other GPIOs, but only accessible from task contexts.

	  This driver provides an in-kernel interface to those GPIOs using
	  platform-neutral GPIO calls.

218 219 220 221 222 223 224 225 226 227 228
config GPIO_SX150X
	bool "Semtech SX150x I2C GPIO expander"
	depends on I2C=y
	default n
	help
	  Say yes here to provide support for Semtech SX150-series I2C
	  GPIO expanders. Compatible models include:

	  8 bits:  sx1508q
	  16 bits: sx1509q

R
Rabin Vincent 已提交
229 230 231 232 233 234 235
config GPIO_STMPE
	bool "STMPE GPIOs"
	depends on MFD_STMPE
	help
	  This enables support for the GPIOs found on the STMPE I/O
	  Expanders.

236 237 238
config GPIO_TC3589X
	bool "TC3589X GPIOs"
	depends on MFD_TC3589X
R
Rabin Vincent 已提交
239
	help
240
	  This enables support for the GPIOs found on the TC3589X
R
Rabin Vincent 已提交
241 242
	  I/O Expander.

D
David Brownell 已提交
243 244 245 246 247 248 249
config GPIO_TWL4030
	tristate "TWL4030, TWL5030, and TPS659x0 GPIOs"
	depends on TWL4030_CORE
	help
	  Say yes here to access the GPIO signals of various multi-function
	  power management chips from Texas Instruments.

M
Mark Brown 已提交
250 251 252 253 254 255 256
config GPIO_WM831X
	tristate "WM831x GPIOs"
	depends on MFD_WM831X
	help
	  Say yes here to access the GPIO signals of WM831x power management
	  chips from Wolfson Microelectronics.

257 258 259 260 261 262 263
config GPIO_WM8350
	tristate "WM8350 GPIOs"
	depends on MFD_WM8350
	help
	  Say yes here to access the GPIO signals of WM8350 power management
	  chips from Wolfson Microelectronics.

M
Mark Brown 已提交
264 265 266 267 268 269 270
config GPIO_WM8994
	tristate "WM8994 GPIOs"
	depends on MFD_WM8994
	help
	  Say yes here to access the GPIO signals of WM8994 audio hub
	  CODECs from Wolfson Microelectronics.

271 272 273 274 275 276 277 278 279 280
config GPIO_ADP5520
	tristate "GPIO Support for ADP5520 PMIC"
	depends on PMIC_ADP5520
	help
	  This option enables support for on-chip GPIO found
	  on Analog Devices ADP5520 PMICs.

	  To compile this driver as a module, choose M here: the module will
	  be called adp5520-gpio.

281 282 283 284 285 286 287 288 289
config GPIO_ADP5588
	tristate "ADP5588 I2C GPIO expander"
	depends on I2C
	help
	  This option enables support for 18 GPIOs found
	  on Analog Devices ADP5588 GPIO Expanders.
	  To compile this driver as a module, choose M here: the module will be
	  called adp5588-gpio.

290 291 292 293 294 295 296
config GPIO_ADP5588_IRQ
	bool "Interrupt controller support for ADP5588"
	depends on GPIO_ADP5588=y
	help
	  Say yes here to enable the adp5588 to be used as an interrupt
	  controller. It requires the driver to be built in the kernel.

M
Michael Buesch 已提交
297 298
comment "PCI GPIO expanders:"

299 300
config GPIO_CS5535
	tristate "AMD CS5535/CS5536 GPIO support"
301
	depends on PCI && X86 && !CS5535_GPIO
302 303 304 305 306 307 308
	help
	  The AMD CS5535 and CS5536 southbridges support 28 GPIO pins that
	  can be used for quite a number of things.  The CS5535/6 is found on
	  AMD Geode and Lemote Yeeloong devices.

	  If unsure, say N.

M
Michael Buesch 已提交
309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324
config GPIO_BT8XX
	tristate "BT8XX GPIO abuser"
	depends on PCI && VIDEO_BT848=n
	help
	  The BT8xx frame grabber chip has 24 GPIO pins than can be abused
	  as a cheap PCI GPIO card.

	  This chip can be found on Miro, Hauppauge and STB TV-cards.

	  The card needs to be physically altered for using it as a
	  GPIO card. For more information on how to build a GPIO card
	  from a BT8xx TV card, see the documentation file at
	  Documentation/bt8xxgpio.txt

	  If unsure, say N.

325
config GPIO_LANGWELL
A
Alek Du 已提交
326
	bool "Intel Langwell/Penwell GPIO support"
327
	depends on PCI && X86
328
	help
A
Alek Du 已提交
329
	  Say Y here to support Intel Langwell/Penwell GPIO.
330

331 332
config GPIO_PCH
	tristate "PCH GPIO of Intel Topcliff"
333
	depends on PCI && X86
334 335 336 337 338
	help
	  This driver is for PCH(Platform controller Hub) GPIO of Intel Topcliff
	  which is an IOH(Input/Output Hub) for x86 embedded processor.
	  This driver can access PCH GPIO device.

339 340 341 342 343 344 345 346 347
config GPIO_ML_IOH
	tristate "OKI SEMICONDUCTOR ML7213 IOH GPIO support"
	depends on PCI
	help
	  ML7213 is companion chip for Intel Atom E6xx series.
	  This driver can be used for OKI SEMICONDUCTOR ML7213 IOH(Input/Output
	  Hub) which is for IVI(In-Vehicle Infotainment) use.
	  This driver can access the IOH's GPIO device.

348 349 350 351 352 353
config GPIO_TIMBERDALE
	bool "Support for timberdale GPIO IP"
	depends on MFD_TIMBERDALE && GPIOLIB && HAS_IOMEM
	---help---
	Add support for the GPIO IP in the timberdale FPGA.

354 355 356
config GPIO_RDC321X
	tristate "RDC R-321x GPIO support"
	depends on PCI && GPIOLIB
357
	select MFD_SUPPORT
358
	select MFD_CORE
359 360 361 362 363
	select MFD_RDC321X
	help
	  Support for the RDC R321x SoC GPIOs over southbridge
	  PCI configuration space.

364 365
comment "SPI GPIO expanders:"

366 367 368
config GPIO_MAX7301
	tristate "Maxim MAX7301 GPIO expander"
	depends on SPI_MASTER
369
	select GPIO_MAX730X
370
	help
371
	  GPIO driver for Maxim MAX7301 SPI-based GPIO expander.
372

373
config GPIO_MCP23S08
374
	tristate "Microchip MCP23Sxx I/O expander"
375 376
	depends on SPI_MASTER
	help
377 378
	  SPI driver for Microchip MCP23S08/MPC23S17 I/O expanders.
	  This provides a GPIO interface supporting inputs and outputs.
379

R
Richard Röjfors 已提交
380 381 382 383 384 385 386
config GPIO_MC33880
	tristate "Freescale MC33880 high-side/low-side switch"
	depends on SPI_MASTER
	help
	  SPI driver for Freescale MC33880 high-side/low-side switch.
	  This provides GPIO interface supporting inputs and outputs.

387 388 389 390 391 392 393 394
config GPIO_74X164
	tristate "74x164 serial-in/parallel-out 8-bits shift register"
	depends on SPI_MASTER
	help
	  Platform driver for 74x164 compatible serial-in/parallel-out
	  8-outputs shift registers. This driver can be used to provide access
	  to more gpio outputs.

395 396 397 398 399 400 401 402 403 404 405 406
comment "AC97 GPIO expanders:"

config GPIO_UCB1400
	bool "Philips UCB1400 GPIO"
	depends on UCB1400_CORE
	help
	  This enables support for the Philips UCB1400 GPIO pins.
	  The UCB1400 is an AC97 audio codec.

	  To compile this driver as a module, choose M here: the
	  module will be called ucb1400_gpio.

407 408 409 410 411 412 413 414 415 416
comment "MODULbus GPIO expanders:"

config GPIO_JANZ_TTL
	tristate "Janz VMOD-TTL Digital IO Module"
	depends on MFD_JANZ_CMODIO
	help
	  This enables support for the Janz VMOD-TTL Digital IO module.
	  This driver provides support for driving the pins in output
	  mode only. Input mode is not supported.

M
Michael Buesch 已提交
417
endif