phy_lp.c 26.2 KB
Newer Older
M
Michael Buesch 已提交
1 2 3 4 5
/*

  Broadcom B43 wireless driver
  IEEE 802.11g LP-PHY driver

6
  Copyright (c) 2008-2009 Michael Buesch <mb@bu3sch.de>
M
Michael Buesch 已提交
7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25

  This program is free software; you can redistribute it and/or modify
  it under the terms of the GNU General Public License as published by
  the Free Software Foundation; either version 2 of the License, or
  (at your option) any later version.

  This program is distributed in the hope that it will be useful,
  but WITHOUT ANY WARRANTY; without even the implied warranty of
  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  GNU General Public License for more details.

  You should have received a copy of the GNU General Public License
  along with this program; see the file COPYING.  If not, write to
  the Free Software Foundation, Inc., 51 Franklin Steet, Fifth Floor,
  Boston, MA 02110-1301, USA.

*/

#include "b43.h"
26
#include "main.h"
M
Michael Buesch 已提交
27 28
#include "phy_lp.h"
#include "phy_common.h"
29
#include "tables_lpphy.h"
M
Michael Buesch 已提交
30 31 32 33 34 35 36 37 38 39 40 41 42 43


static int b43_lpphy_op_allocate(struct b43_wldev *dev)
{
	struct b43_phy_lp *lpphy;

	lpphy = kzalloc(sizeof(*lpphy), GFP_KERNEL);
	if (!lpphy)
		return -ENOMEM;
	dev->phy.lp = lpphy;

	return 0;
}

M
Michael Buesch 已提交
44
static void b43_lpphy_op_prepare_structs(struct b43_wldev *dev)
M
Michael Buesch 已提交
45
{
M
Michael Buesch 已提交
46 47
	struct b43_phy *phy = &dev->phy;
	struct b43_phy_lp *lpphy = phy->lp;
M
Michael Buesch 已提交
48

M
Michael Buesch 已提交
49
	memset(lpphy, 0, sizeof(*lpphy));
M
Michael Buesch 已提交
50

M
Michael Buesch 已提交
51
	//TODO
M
Michael Buesch 已提交
52 53
}

M
Michael Buesch 已提交
54
static void b43_lpphy_op_free(struct b43_wldev *dev)
M
Michael Buesch 已提交
55 56 57 58 59 60 61
{
	struct b43_phy_lp *lpphy = dev->phy.lp;

	kfree(lpphy);
	dev->phy.lp = NULL;
}

62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87
static void lpphy_adjust_gain_table(struct b43_wldev *dev)
{
	struct b43_phy_lp *lpphy = dev->phy.lp;
	u32 freq = dev->wl->hw->conf.channel->center_freq;
	u16 temp[3];
	u16 isolation;

	B43_WARN_ON(dev->phy.rev >= 2);

	if (b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ)
		isolation = lpphy->tx_isolation_med_band;
	else if (freq <= 5320)
		isolation = lpphy->tx_isolation_low_band;
	else if (freq <= 5700)
		isolation = lpphy->tx_isolation_med_band;
	else
		isolation = lpphy->tx_isolation_hi_band;

	temp[0] = ((isolation - 26) / 12) << 12;
	temp[1] = temp[0] + 0x1000;
	temp[2] = temp[0] + 0x2000;

	b43_lptab_write_bulk(dev, B43_LPTAB16(12, 0), 3, temp);
	b43_lptab_write_bulk(dev, B43_LPTAB16(13, 0), 3, temp);
}

88 89
static void lpphy_table_init(struct b43_wldev *dev)
{
90 91 92 93 94 95 96 97 98
	if (dev->phy.rev < 2)
		lpphy_rev0_1_table_init(dev);
	else
		lpphy_rev2plus_table_init(dev);

	lpphy_init_tx_gain_table(dev);

	if (dev->phy.rev < 2)
		lpphy_adjust_gain_table(dev);
99 100 101 102
}

static void lpphy_baseband_rev0_1_init(struct b43_wldev *dev)
{
103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166
	struct ssb_bus *bus = dev->dev->bus;
	u16 tmp, tmp2;

	if (dev->phy.rev == 1 &&
	   (bus->sprom.boardflags_hi & B43_BFH_FEM_BT)) {
		b43_phy_maskset(dev, B43_LPPHY_TR_LOOKUP_1, 0xFFC0, 0x000A);
		b43_phy_maskset(dev, B43_LPPHY_TR_LOOKUP_1, 0x3F00, 0x0900);
		b43_phy_maskset(dev, B43_LPPHY_TR_LOOKUP_2, 0xFFC0, 0x000A);
		b43_phy_maskset(dev, B43_LPPHY_TR_LOOKUP_2, 0xC0FF, 0x0B00);
		b43_phy_maskset(dev, B43_LPPHY_TR_LOOKUP_3, 0xFFC0, 0x000A);
		b43_phy_maskset(dev, B43_LPPHY_TR_LOOKUP_3, 0xC0FF, 0x0400);
		b43_phy_maskset(dev, B43_LPPHY_TR_LOOKUP_4, 0xFFC0, 0x000A);
		b43_phy_maskset(dev, B43_LPPHY_TR_LOOKUP_4, 0xC0FF, 0x0B00);
		b43_phy_maskset(dev, B43_LPPHY_TR_LOOKUP_5, 0xFFC0, 0x000A);
		b43_phy_maskset(dev, B43_LPPHY_TR_LOOKUP_5, 0xC0FF, 0x0900);
		b43_phy_maskset(dev, B43_LPPHY_TR_LOOKUP_6, 0xFFC0, 0x000A);
		b43_phy_maskset(dev, B43_LPPHY_TR_LOOKUP_6, 0xC0FF, 0x0B00);
		b43_phy_maskset(dev, B43_LPPHY_TR_LOOKUP_7, 0xFFC0, 0x000A);
		b43_phy_maskset(dev, B43_LPPHY_TR_LOOKUP_7, 0xC0FF, 0x0900);
		b43_phy_maskset(dev, B43_LPPHY_TR_LOOKUP_8, 0xFFC0, 0x000A);
		b43_phy_maskset(dev, B43_LPPHY_TR_LOOKUP_8, 0xC0FF, 0x0B00);
	} else if (b43_current_band(dev->wl) == IEEE80211_BAND_5GHZ ||
		  (bus->boardinfo.type == 0x048A) || ((dev->phy.rev == 0) &&
		  (bus->sprom.boardflags_lo & B43_BFL_FEM))) {
		b43_phy_maskset(dev, B43_LPPHY_TR_LOOKUP_1, 0xFFC0, 0x0001);
		b43_phy_maskset(dev, B43_LPPHY_TR_LOOKUP_1, 0xC0FF, 0x0400);
		b43_phy_maskset(dev, B43_LPPHY_TR_LOOKUP_2, 0xFFC0, 0x0001);
		b43_phy_maskset(dev, B43_LPPHY_TR_LOOKUP_2, 0xC0FF, 0x0500);
		b43_phy_maskset(dev, B43_LPPHY_TR_LOOKUP_3, 0xFFC0, 0x0002);
		b43_phy_maskset(dev, B43_LPPHY_TR_LOOKUP_3, 0xC0FF, 0x0800);
		b43_phy_maskset(dev, B43_LPPHY_TR_LOOKUP_4, 0xFFC0, 0x0002);
		b43_phy_maskset(dev, B43_LPPHY_TR_LOOKUP_4, 0xC0FF, 0x0A00);
	} else if (dev->phy.rev == 1 ||
		  (bus->sprom.boardflags_lo & B43_BFL_FEM)) {
		b43_phy_maskset(dev, B43_LPPHY_TR_LOOKUP_1, 0xFFC0, 0x0004);
		b43_phy_maskset(dev, B43_LPPHY_TR_LOOKUP_1, 0xC0FF, 0x0800);
		b43_phy_maskset(dev, B43_LPPHY_TR_LOOKUP_2, 0xFFC0, 0x0004);
		b43_phy_maskset(dev, B43_LPPHY_TR_LOOKUP_2, 0xC0FF, 0x0C00);
		b43_phy_maskset(dev, B43_LPPHY_TR_LOOKUP_3, 0xFFC0, 0x0002);
		b43_phy_maskset(dev, B43_LPPHY_TR_LOOKUP_3, 0xC0FF, 0x0100);
		b43_phy_maskset(dev, B43_LPPHY_TR_LOOKUP_4, 0xFFC0, 0x0002);
		b43_phy_maskset(dev, B43_LPPHY_TR_LOOKUP_4, 0xC0FF, 0x0300);
	} else {
		b43_phy_maskset(dev, B43_LPPHY_TR_LOOKUP_1, 0xFFC0, 0x000A);
		b43_phy_maskset(dev, B43_LPPHY_TR_LOOKUP_1, 0xC0FF, 0x0900);
		b43_phy_maskset(dev, B43_LPPHY_TR_LOOKUP_2, 0xFFC0, 0x000A);
		b43_phy_maskset(dev, B43_LPPHY_TR_LOOKUP_2, 0xC0FF, 0x0B00);
		b43_phy_maskset(dev, B43_LPPHY_TR_LOOKUP_3, 0xFFC0, 0x0006);
		b43_phy_maskset(dev, B43_LPPHY_TR_LOOKUP_3, 0xC0FF, 0x0500);
		b43_phy_maskset(dev, B43_LPPHY_TR_LOOKUP_4, 0xFFC0, 0x0006);
		b43_phy_maskset(dev, B43_LPPHY_TR_LOOKUP_4, 0xC0FF, 0x0700);
	}
	if (dev->phy.rev == 1) {
		b43_phy_copy(dev, B43_LPPHY_TR_LOOKUP_5, B43_LPPHY_TR_LOOKUP_1);
		b43_phy_copy(dev, B43_LPPHY_TR_LOOKUP_6, B43_LPPHY_TR_LOOKUP_2);
		b43_phy_copy(dev, B43_LPPHY_TR_LOOKUP_7, B43_LPPHY_TR_LOOKUP_3);
		b43_phy_copy(dev, B43_LPPHY_TR_LOOKUP_8, B43_LPPHY_TR_LOOKUP_4);
	}
	if ((bus->sprom.boardflags_hi & B43_BFH_FEM_BT) &&
	    (bus->chip_id == 0x5354) &&
	    (bus->chip_package == SSB_CHIPPACK_BCM4712S)) {
		b43_phy_set(dev, B43_LPPHY_CRSGAIN_CTL, 0x0006);
		b43_phy_write(dev, B43_LPPHY_GPIO_SELECT, 0x0005);
		b43_phy_write(dev, B43_LPPHY_GPIO_OUTEN, 0xFFFF);
167
		b43_hf_write(dev, b43_hf_read(dev) | B43_HF_PR45960W);
168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195
	}
	if (b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ) {
		b43_phy_set(dev, B43_LPPHY_LP_PHY_CTL, 0x8000);
		b43_phy_set(dev, B43_LPPHY_CRSGAIN_CTL, 0x0040);
		b43_phy_maskset(dev, B43_LPPHY_MINPWR_LEVEL, 0x00FF, 0xA400);
		b43_phy_maskset(dev, B43_LPPHY_CRSGAIN_CTL, 0xF0FF, 0x0B00);
		b43_phy_maskset(dev, B43_LPPHY_SYNCPEAKCNT, 0xFFF8, 0x0007);
		b43_phy_maskset(dev, B43_LPPHY_DSSS_CONFIRM_CNT, 0xFFF8, 0x0003);
		b43_phy_maskset(dev, B43_LPPHY_DSSS_CONFIRM_CNT, 0xFFC7, 0x0020);
		b43_phy_mask(dev, B43_LPPHY_IDLEAFTERPKTRXTO, 0x00FF);
	} else { /* 5GHz */
		b43_phy_mask(dev, B43_LPPHY_LP_PHY_CTL, 0x7FFF);
		b43_phy_mask(dev, B43_LPPHY_CRSGAIN_CTL, 0xFFBF);
	}
	if (dev->phy.rev == 1) {
		tmp = b43_phy_read(dev, B43_LPPHY_CLIPCTRTHRESH);
		tmp2 = (tmp & 0x03E0) >> 5;
		tmp2 |= tmp << 5;
		b43_phy_write(dev, B43_LPPHY_4C3, tmp2);
		tmp = b43_phy_read(dev, B43_LPPHY_OFDMSYNCTHRESH0);
		tmp2 = (tmp & 0x1F00) >> 8;
		tmp2 |= tmp << 5;
		b43_phy_write(dev, B43_LPPHY_4C4, tmp2);
		tmp = b43_phy_read(dev, B43_LPPHY_VERYLOWGAINDB);
		tmp2 = tmp & 0x00FF;
		tmp2 |= tmp << 8;
		b43_phy_write(dev, B43_LPPHY_4C5, tmp2);
	}
196 197
}

198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247
static void lpphy_save_dig_flt_state(struct b43_wldev *dev)
{
	static const u16 addr[] = {
		B43_PHY_OFDM(0xC1),
		B43_PHY_OFDM(0xC2),
		B43_PHY_OFDM(0xC3),
		B43_PHY_OFDM(0xC4),
		B43_PHY_OFDM(0xC5),
		B43_PHY_OFDM(0xC6),
		B43_PHY_OFDM(0xC7),
		B43_PHY_OFDM(0xC8),
		B43_PHY_OFDM(0xCF),
	};

	static const u16 coefs[] = {
		0xDE5E, 0xE832, 0xE331, 0x4D26,
		0x0026, 0x1420, 0x0020, 0xFE08,
		0x0008,
	};

	struct b43_phy_lp *lpphy = dev->phy.lp;
	int i;

	for (i = 0; i < ARRAY_SIZE(addr); i++) {
		lpphy->dig_flt_state[i] = b43_phy_read(dev, addr[i]);
		b43_phy_write(dev, addr[i], coefs[i]);
	}
}

static void lpphy_restore_dig_flt_state(struct b43_wldev *dev)
{
	static const u16 addr[] = {
		B43_PHY_OFDM(0xC1),
		B43_PHY_OFDM(0xC2),
		B43_PHY_OFDM(0xC3),
		B43_PHY_OFDM(0xC4),
		B43_PHY_OFDM(0xC5),
		B43_PHY_OFDM(0xC6),
		B43_PHY_OFDM(0xC7),
		B43_PHY_OFDM(0xC8),
		B43_PHY_OFDM(0xCF),
	};

	struct b43_phy_lp *lpphy = dev->phy.lp;
	int i;

	for (i = 0; i < ARRAY_SIZE(addr); i++)
		b43_phy_write(dev, addr[i], lpphy->dig_flt_state[i]);
}

248 249
static void lpphy_baseband_rev2plus_init(struct b43_wldev *dev)
{
250
	struct ssb_bus *bus = dev->dev->bus;
251 252 253 254 255 256 257 258 259 260 261
	struct b43_phy_lp *lpphy = dev->phy.lp;

	b43_phy_write(dev, B43_LPPHY_AFE_DAC_CTL, 0x50);
	b43_phy_write(dev, B43_LPPHY_AFE_CTL, 0x8800);
	b43_phy_write(dev, B43_LPPHY_AFE_CTL_OVR, 0);
	b43_phy_write(dev, B43_LPPHY_AFE_CTL_OVRVAL, 0);
	b43_phy_write(dev, B43_LPPHY_RF_OVERRIDE_0, 0);
	b43_phy_write(dev, B43_LPPHY_RF_OVERRIDE_2, 0);
	b43_phy_write(dev, B43_PHY_OFDM(0xF9), 0);
	b43_phy_write(dev, B43_LPPHY_TR_LOOKUP_1, 0);
	b43_phy_set(dev, B43_LPPHY_ADC_COMPENSATION_CTL, 0x10);
262
	b43_phy_maskset(dev, B43_LPPHY_OFDMSYNCTHRESH0, 0xFF00, 0xB4);
263 264 265 266 267 268 269
	b43_phy_maskset(dev, B43_LPPHY_DCOFFSETTRANSIENT, 0xF8FF, 0x200);
	b43_phy_maskset(dev, B43_LPPHY_DCOFFSETTRANSIENT, 0xFF00, 0x7F);
	b43_phy_maskset(dev, B43_LPPHY_GAINDIRECTMISMATCH, 0xFF0F, 0x40);
	b43_phy_maskset(dev, B43_LPPHY_PREAMBLECONFIRMTO, 0xFF00, 0x2);
	b43_phy_mask(dev, B43_LPPHY_CRSGAIN_CTL, ~0x4000);
	b43_phy_mask(dev, B43_LPPHY_CRSGAIN_CTL, ~0x2000);
	b43_phy_set(dev, B43_PHY_OFDM(0x10A), 0x1);
270 271 272 273 274 275
	if (bus->boardinfo.rev >= 0x18) {
		b43_lptab_write(dev, B43_LPTAB32(17, 65), 0xEC);
		b43_phy_maskset(dev, B43_PHY_OFDM(0x10A), 0xFF01, 0x14);
	} else {
		b43_phy_maskset(dev, B43_PHY_OFDM(0x10A), 0xFF01, 0x10);
	}
276
	b43_phy_maskset(dev, B43_PHY_OFDM(0xDF), 0xFF00, 0xF4);
M
Michael Buesch 已提交
277
	b43_phy_maskset(dev, B43_PHY_OFDM(0xDF), 0x00FF, 0xF100);
278 279 280 281 282 283 284 285 286
	b43_phy_write(dev, B43_LPPHY_CLIPTHRESH, 0x48);
	b43_phy_maskset(dev, B43_LPPHY_HIGAINDB, 0xFF00, 0x46);
	b43_phy_maskset(dev, B43_PHY_OFDM(0xE4), 0xFF00, 0x10);
	b43_phy_maskset(dev, B43_LPPHY_PWR_THRESH1, 0xFFF0, 0x9);
	b43_phy_mask(dev, B43_LPPHY_GAINDIRECTMISMATCH, ~0xF);
	b43_phy_maskset(dev, B43_LPPHY_VERYLOWGAINDB, 0x00FF, 0x5500);
	b43_phy_maskset(dev, B43_LPPHY_CLIPCTRTHRESH, 0xF81F, 0xA0);
	b43_phy_maskset(dev, B43_LPPHY_GAINDIRECTMISMATCH, 0xE0FF, 0x300);
	b43_phy_maskset(dev, B43_LPPHY_HIGAINDB, 0x00FF, 0x2A00);
287 288 289 290 291 292 293
	if ((bus->chip_id == 0x4325) && (bus->chip_rev == 0)) {
		b43_phy_maskset(dev, B43_LPPHY_LOWGAINDB, 0x00FF, 0x2100);
		b43_phy_maskset(dev, B43_LPPHY_VERYLOWGAINDB, 0xFF00, 0xA);
	} else {
		b43_phy_maskset(dev, B43_LPPHY_LOWGAINDB, 0x00FF, 0x1E00);
		b43_phy_maskset(dev, B43_LPPHY_VERYLOWGAINDB, 0xFF00, 0xD);
	}
294 295 296 297 298 299 300 301 302 303 304
	b43_phy_maskset(dev, B43_PHY_OFDM(0xFE), 0xFFE0, 0x1F);
	b43_phy_maskset(dev, B43_PHY_OFDM(0xFF), 0xFFE0, 0xC);
	b43_phy_maskset(dev, B43_PHY_OFDM(0x100), 0xFF00, 0x19);
	b43_phy_maskset(dev, B43_PHY_OFDM(0xFF), 0x03FF, 0x3C00);
	b43_phy_maskset(dev, B43_PHY_OFDM(0xFE), 0xFC1F, 0x3E0);
	b43_phy_maskset(dev, B43_PHY_OFDM(0xFF), 0xFFE0, 0xC);
	b43_phy_maskset(dev, B43_PHY_OFDM(0x100), 0x00FF, 0x1900);
	b43_phy_maskset(dev, B43_LPPHY_CLIPCTRTHRESH, 0x83FF, 0x5800);
	b43_phy_maskset(dev, B43_LPPHY_CLIPCTRTHRESH, 0xFFE0, 0x12);
	b43_phy_maskset(dev, B43_LPPHY_GAINMISMATCH, 0x0FFF, 0x9000);

305 306 307 308
	if ((bus->chip_id == 0x4325) && (bus->chip_rev == 1)) {
		b43_lptab_write(dev, B43_LPTAB16(0x08, 0x14), 0);
		b43_lptab_write(dev, B43_LPTAB16(0x08, 0x12), 0x40);
	}
309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327

	if (b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ) {
		b43_phy_set(dev, B43_LPPHY_CRSGAIN_CTL, 0x40);
		b43_phy_maskset(dev, B43_LPPHY_CRSGAIN_CTL, 0xF0FF, 0xB00);
		b43_phy_maskset(dev, B43_LPPHY_SYNCPEAKCNT, 0xFFF8, 0x6);
		b43_phy_maskset(dev, B43_LPPHY_MINPWR_LEVEL, 0x00FF, 0x9D00);
		b43_phy_maskset(dev, B43_LPPHY_MINPWR_LEVEL, 0xFF00, 0xA1);
	} else /* 5GHz */
		b43_phy_mask(dev, B43_LPPHY_CRSGAIN_CTL, ~0x40);

	b43_phy_maskset(dev, B43_LPPHY_CRS_ED_THRESH, 0xFF00, 0xB3);
	b43_phy_maskset(dev, B43_LPPHY_CRS_ED_THRESH, 0x00FF, 0xAD00);
	b43_phy_maskset(dev, B43_LPPHY_INPUT_PWRDB, 0xFF00, lpphy->rx_pwr_offset);
	b43_phy_set(dev, B43_LPPHY_RESET_CTL, 0x44);
	b43_phy_write(dev, B43_LPPHY_RESET_CTL, 0x80);
	b43_phy_write(dev, B43_LPPHY_AFE_RSSI_CTL_0, 0xA954);
	b43_phy_write(dev, B43_LPPHY_AFE_RSSI_CTL_1,
		      0x2000 | ((u16)lpphy->rssi_gs << 10) |
		      ((u16)lpphy->rssi_vc << 4) | lpphy->rssi_vf);
328 329 330 331 332 333 334 335

	if ((bus->chip_id == 0x4325) && (bus->chip_rev == 0)) {
		b43_phy_set(dev, B43_LPPHY_AFE_ADC_CTL_0, 0x1C);
		b43_phy_maskset(dev, B43_LPPHY_AFE_CTL, 0x00FF, 0x8800);
		b43_phy_maskset(dev, B43_LPPHY_AFE_ADC_CTL_1, 0xFC3C, 0x0400);
	}

	lpphy_save_dig_flt_state(dev);
336 337 338 339 340 341 342 343 344 345 346
}

static void lpphy_baseband_init(struct b43_wldev *dev)
{
	lpphy_table_init(dev);
	if (dev->phy.rev >= 2)
		lpphy_baseband_rev2plus_init(dev);
	else
		lpphy_baseband_rev0_1_init(dev);
}

M
Michael Buesch 已提交
347 348 349 350 351 352 353 354
struct b2062_freqdata {
	u16 freq;
	u8 data[6];
};

/* Initialize the 2062 radio. */
static void lpphy_2062_init(struct b43_wldev *dev)
{
355
	struct ssb_bus *bus = dev->dev->bus;
M
Michael Buesch 已提交
356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388
	u32 crystalfreq, pdiv, tmp, ref;
	unsigned int i;
	const struct b2062_freqdata *fd = NULL;

	static const struct b2062_freqdata freqdata_tab[] = {
		{ .freq = 12000, .data[0] =  6, .data[1] =  6, .data[2] =  6,
				 .data[3] =  6, .data[4] = 10, .data[5] =  6, },
		{ .freq = 13000, .data[0] =  4, .data[1] =  4, .data[2] =  4,
				 .data[3] =  4, .data[4] = 11, .data[5] =  7, },
		{ .freq = 14400, .data[0] =  3, .data[1] =  3, .data[2] =  3,
				 .data[3] =  3, .data[4] = 12, .data[5] =  7, },
		{ .freq = 16200, .data[0] =  3, .data[1] =  3, .data[2] =  3,
				 .data[3] =  3, .data[4] = 13, .data[5] =  8, },
		{ .freq = 18000, .data[0] =  2, .data[1] =  2, .data[2] =  2,
				 .data[3] =  2, .data[4] = 14, .data[5] =  8, },
		{ .freq = 19200, .data[0] =  1, .data[1] =  1, .data[2] =  1,
				 .data[3] =  1, .data[4] = 14, .data[5] =  9, },
	};

	b2062_upload_init_table(dev);

	b43_radio_write(dev, B2062_N_TX_CTL3, 0);
	b43_radio_write(dev, B2062_N_TX_CTL4, 0);
	b43_radio_write(dev, B2062_N_TX_CTL5, 0);
	b43_radio_write(dev, B2062_N_PDN_CTL0, 0x40);
	b43_radio_write(dev, B2062_N_PDN_CTL0, 0);
	b43_radio_write(dev, B2062_N_CALIB_TS, 0x10);
	b43_radio_write(dev, B2062_N_CALIB_TS, 0);
	if (b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ)
		b43_radio_set(dev, B2062_N_TSSI_CTL0, 0x1);
	else
		b43_radio_mask(dev, B2062_N_TSSI_CTL0, ~0x1);

389 390 391 392 393
	/* Get the crystal freq, in Hz. */
	crystalfreq = bus->chipco.pmu.crystalfreq * 1000;

	B43_WARN_ON(!(bus->chipco.capabilities & SSB_CHIPCO_CAP_PMU));
	B43_WARN_ON(crystalfreq == 0);
M
Michael Buesch 已提交
394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418

	if (crystalfreq >= 30000000) {
		pdiv = 1;
		b43_radio_mask(dev, B2062_S_RFPLL_CTL1, 0xFFFB);
	} else {
		pdiv = 2;
		b43_radio_set(dev, B2062_S_RFPLL_CTL1, 0x4);
	}

	tmp = (800000000 * pdiv + crystalfreq) / (32000000 * pdiv);
	tmp = (tmp - 1) & 0xFF;
	b43_radio_write(dev, B2062_S_RFPLL_CTL18, tmp);

	tmp = (2 * crystalfreq + 1000000 * pdiv) / (2000000 * pdiv);
	tmp = ((tmp & 0xFF) - 1) & 0xFFFF;
	b43_radio_write(dev, B2062_S_RFPLL_CTL19, tmp);

	ref = (1000 * pdiv + 2 * crystalfreq) / (2000 * pdiv);
	ref &= 0xFFFF;
	for (i = 0; i < ARRAY_SIZE(freqdata_tab); i++) {
		if (ref < freqdata_tab[i].freq) {
			fd = &freqdata_tab[i];
			break;
		}
	}
419 420 421 422
	if (!fd)
		fd = &freqdata_tab[ARRAY_SIZE(freqdata_tab) - 1];
	b43dbg(dev->wl, "b2062: Using crystal tab entry %u kHz.\n",
	       fd->freq); /* FIXME: Keep this printk until the code is fully debugged. */
M
Michael Buesch 已提交
423 424 425 426

	b43_radio_write(dev, B2062_S_RFPLL_CTL8,
			((u16)(fd->data[1]) << 4) | fd->data[0]);
	b43_radio_write(dev, B2062_S_RFPLL_CTL9,
427
			((u16)(fd->data[3]) << 4) | fd->data[2]);
M
Michael Buesch 已提交
428 429 430 431 432 433
	b43_radio_write(dev, B2062_S_RFPLL_CTL10, fd->data[4]);
	b43_radio_write(dev, B2062_S_RFPLL_CTL11, fd->data[5]);
}

/* Initialize the 2063 radio. */
static void lpphy_2063_init(struct b43_wldev *dev)
434
{
G
Gábor Stefanik 已提交
435 436 437 438 439 440 441 442 443 444 445
	b2063_upload_init_table(dev);
	b43_radio_write(dev, B2063_LOGEN_SP5, 0);
	b43_radio_set(dev, B2063_COMM8, 0x38);
	b43_radio_write(dev, B2063_REG_SP1, 0x56);
	b43_radio_mask(dev, B2063_RX_BB_CTL2, ~0x2);
	b43_radio_write(dev, B2063_PA_SP7, 0);
	b43_radio_write(dev, B2063_TX_RF_SP6, 0x20);
	b43_radio_write(dev, B2063_TX_RF_SP9, 0x40);
	b43_radio_write(dev, B2063_PA_SP3, 0xa0);
	b43_radio_write(dev, B2063_PA_SP4, 0xa0);
	b43_radio_write(dev, B2063_PA_SP2, 0x18);
446 447
}

448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487
struct lpphy_stx_table_entry {
	u16 phy_offset;
	u16 phy_shift;
	u16 rf_addr;
	u16 rf_shift;
	u16 mask;
};

static const struct lpphy_stx_table_entry lpphy_stx_table[] = {
	{ .phy_offset = 2, .phy_shift = 6, .rf_addr = 0x3d, .rf_shift = 3, .mask = 0x01, },
	{ .phy_offset = 1, .phy_shift = 12, .rf_addr = 0x4c, .rf_shift = 1, .mask = 0x01, },
	{ .phy_offset = 1, .phy_shift = 8, .rf_addr = 0x50, .rf_shift = 0, .mask = 0x7f, },
	{ .phy_offset = 0, .phy_shift = 8, .rf_addr = 0x44, .rf_shift = 0, .mask = 0xff, },
	{ .phy_offset = 1, .phy_shift = 0, .rf_addr = 0x4a, .rf_shift = 0, .mask = 0xff, },
	{ .phy_offset = 0, .phy_shift = 4, .rf_addr = 0x4d, .rf_shift = 0, .mask = 0xff, },
	{ .phy_offset = 1, .phy_shift = 4, .rf_addr = 0x4e, .rf_shift = 0, .mask = 0xff, },
	{ .phy_offset = 0, .phy_shift = 12, .rf_addr = 0x4f, .rf_shift = 0, .mask = 0x0f, },
	{ .phy_offset = 1, .phy_shift = 0, .rf_addr = 0x4f, .rf_shift = 4, .mask = 0x0f, },
	{ .phy_offset = 3, .phy_shift = 0, .rf_addr = 0x49, .rf_shift = 0, .mask = 0x0f, },
	{ .phy_offset = 4, .phy_shift = 3, .rf_addr = 0x46, .rf_shift = 4, .mask = 0x07, },
	{ .phy_offset = 3, .phy_shift = 15, .rf_addr = 0x46, .rf_shift = 0, .mask = 0x01, },
	{ .phy_offset = 4, .phy_shift = 0, .rf_addr = 0x46, .rf_shift = 1, .mask = 0x07, },
	{ .phy_offset = 3, .phy_shift = 8, .rf_addr = 0x48, .rf_shift = 4, .mask = 0x07, },
	{ .phy_offset = 3, .phy_shift = 11, .rf_addr = 0x48, .rf_shift = 0, .mask = 0x0f, },
	{ .phy_offset = 3, .phy_shift = 4, .rf_addr = 0x49, .rf_shift = 4, .mask = 0x0f, },
	{ .phy_offset = 2, .phy_shift = 15, .rf_addr = 0x45, .rf_shift = 0, .mask = 0x01, },
	{ .phy_offset = 5, .phy_shift = 13, .rf_addr = 0x52, .rf_shift = 4, .mask = 0x07, },
	{ .phy_offset = 6, .phy_shift = 0, .rf_addr = 0x52, .rf_shift = 7, .mask = 0x01, },
	{ .phy_offset = 5, .phy_shift = 3, .rf_addr = 0x41, .rf_shift = 5, .mask = 0x07, },
	{ .phy_offset = 5, .phy_shift = 6, .rf_addr = 0x41, .rf_shift = 0, .mask = 0x0f, },
	{ .phy_offset = 5, .phy_shift = 10, .rf_addr = 0x42, .rf_shift = 5, .mask = 0x07, },
	{ .phy_offset = 4, .phy_shift = 15, .rf_addr = 0x42, .rf_shift = 0, .mask = 0x01, },
	{ .phy_offset = 5, .phy_shift = 0, .rf_addr = 0x42, .rf_shift = 1, .mask = 0x07, },
	{ .phy_offset = 4, .phy_shift = 11, .rf_addr = 0x43, .rf_shift = 4, .mask = 0x0f, },
	{ .phy_offset = 4, .phy_shift = 7, .rf_addr = 0x43, .rf_shift = 0, .mask = 0x0f, },
	{ .phy_offset = 4, .phy_shift = 6, .rf_addr = 0x45, .rf_shift = 1, .mask = 0x01, },
	{ .phy_offset = 2, .phy_shift = 7, .rf_addr = 0x40, .rf_shift = 4, .mask = 0x0f, },
	{ .phy_offset = 2, .phy_shift = 11, .rf_addr = 0x40, .rf_shift = 0, .mask = 0x0f, },
};

M
Michael Buesch 已提交
488 489
static void lpphy_sync_stx(struct b43_wldev *dev)
{
490 491 492 493 494 495 496 497 498 499
	const struct lpphy_stx_table_entry *e;
	unsigned int i;
	u16 tmp;

	for (i = 0; i < ARRAY_SIZE(lpphy_stx_table); i++) {
		e = &lpphy_stx_table[i];
		tmp = b43_radio_read(dev, e->rf_addr);
		tmp >>= e->rf_shift;
		tmp <<= e->phy_shift;
		b43_phy_maskset(dev, B43_PHY_OFDM(0xF2 + e->phy_offset),
500
				~(e->mask << e->phy_shift), tmp);
501
	}
M
Michael Buesch 已提交
502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518
}

static void lpphy_radio_init(struct b43_wldev *dev)
{
	/* The radio is attached through the 4wire bus. */
	b43_phy_set(dev, B43_LPPHY_FOURWIRE_CTL, 0x2);
	udelay(1);
	b43_phy_mask(dev, B43_LPPHY_FOURWIRE_CTL, 0xFFFD);
	udelay(1);

	if (dev->phy.rev < 2) {
		lpphy_2062_init(dev);
	} else {
		lpphy_2063_init(dev);
		lpphy_sync_stx(dev);
		b43_phy_write(dev, B43_PHY_OFDM(0xF0), 0x5F80);
		b43_phy_write(dev, B43_PHY_OFDM(0xF1), 0);
519 520 521
		if (dev->dev->bus->chip_id == 0x4325) {
			// TODO SSB PMU recalibration
		}
M
Michael Buesch 已提交
522 523 524
	}
}

525 526 527 528 529 530 531 532 533 534 535 536 537 538 539 540 541 542 543 544 545 546 547 548 549 550 551 552 553 554 555 556 557 558 559 560 561 562 563 564 565 566 567 568 569 570 571 572 573 574 575 576 577 578 579 580 581 582 583 584 585 586 587 588 589 590 591 592 593 594 595 596 597 598 599 600 601 602 603 604 605 606 607 608 609 610 611 612 613 614 615 616 617 618 619 620 621 622 623 624 625 626 627 628 629 630 631 632 633 634 635 636 637 638 639 640 641 642 643 644 645 646 647 648 649 650 651 652 653 654 655 656 657 658 659 660 661 662 663 664 665 666 667 668 669 670 671 672 673 674 675 676 677 678 679 680 681 682 683 684 685 686 687 688 689 690 691 692 693 694
/* Read the TX power control mode from hardware. */
static void lpphy_read_tx_pctl_mode_from_hardware(struct b43_wldev *dev)
{
	struct b43_phy_lp *lpphy = dev->phy.lp;
	u16 ctl;

	ctl = b43_phy_read(dev, B43_LPPHY_TX_PWR_CTL_CMD);
	switch (ctl & B43_LPPHY_TX_PWR_CTL_CMD_MODE) {
	case B43_LPPHY_TX_PWR_CTL_CMD_MODE_OFF:
		lpphy->txpctl_mode = B43_LPPHY_TXPCTL_OFF;
		break;
	case B43_LPPHY_TX_PWR_CTL_CMD_MODE_SW:
		lpphy->txpctl_mode = B43_LPPHY_TXPCTL_SW;
		break;
	case B43_LPPHY_TX_PWR_CTL_CMD_MODE_HW:
		lpphy->txpctl_mode = B43_LPPHY_TXPCTL_HW;
		break;
	default:
		lpphy->txpctl_mode = B43_LPPHY_TXPCTL_UNKNOWN;
		B43_WARN_ON(1);
		break;
	}
}

/* Set the TX power control mode in hardware. */
static void lpphy_write_tx_pctl_mode_to_hardware(struct b43_wldev *dev)
{
	struct b43_phy_lp *lpphy = dev->phy.lp;
	u16 ctl;

	switch (lpphy->txpctl_mode) {
	case B43_LPPHY_TXPCTL_OFF:
		ctl = B43_LPPHY_TX_PWR_CTL_CMD_MODE_OFF;
		break;
	case B43_LPPHY_TXPCTL_HW:
		ctl = B43_LPPHY_TX_PWR_CTL_CMD_MODE_HW;
		break;
	case B43_LPPHY_TXPCTL_SW:
		ctl = B43_LPPHY_TX_PWR_CTL_CMD_MODE_SW;
		break;
	default:
		ctl = 0;
		B43_WARN_ON(1);
	}
	b43_phy_maskset(dev, B43_LPPHY_TX_PWR_CTL_CMD,
			(u16)~B43_LPPHY_TX_PWR_CTL_CMD_MODE, ctl);
}

static void lpphy_set_tx_power_control(struct b43_wldev *dev,
				       enum b43_lpphy_txpctl_mode mode)
{
	struct b43_phy_lp *lpphy = dev->phy.lp;
	enum b43_lpphy_txpctl_mode oldmode;

	oldmode = lpphy->txpctl_mode;
	lpphy_read_tx_pctl_mode_from_hardware(dev);
	if (lpphy->txpctl_mode == mode)
		return;
	lpphy->txpctl_mode = mode;

	if (oldmode == B43_LPPHY_TXPCTL_HW) {
		//TODO Update TX Power NPT
		//TODO Clear all TX Power offsets
	} else {
		if (mode == B43_LPPHY_TXPCTL_HW) {
			//TODO Recalculate target TX power
			b43_phy_maskset(dev, B43_LPPHY_TX_PWR_CTL_CMD,
					0xFF80, lpphy->tssi_idx);
			b43_phy_maskset(dev, B43_LPPHY_TX_PWR_CTL_NNUM,
					0x8FFF, ((u16)lpphy->tssi_npt << 16));
			//TODO Set "TSSI Transmit Count" variable to total transmitted frame count
			//TODO Disable TX gain override
			lpphy->tx_pwr_idx_over = -1;
		}
	}
	if (dev->phy.rev >= 2) {
		if (mode == B43_LPPHY_TXPCTL_HW)
			b43_phy_maskset(dev, B43_PHY_OFDM(0xD0), 0xFD, 0x2);
		else
			b43_phy_maskset(dev, B43_PHY_OFDM(0xD0), 0xFD, 0);
	}
	lpphy_write_tx_pctl_mode_to_hardware(dev);
}

static void lpphy_set_tx_power_by_index(struct b43_wldev *dev, u8 index)
{
	struct b43_phy_lp *lpphy = dev->phy.lp;

	lpphy->tx_pwr_idx_over = index;
	if (lpphy->txpctl_mode != B43_LPPHY_TXPCTL_OFF)
		lpphy_set_tx_power_control(dev, B43_LPPHY_TXPCTL_SW);

	//TODO
}

static void lpphy_btcoex_override(struct b43_wldev *dev)
{
	b43_write16(dev, B43_MMIO_BTCOEX_CTL, 0x3);
	b43_write16(dev, B43_MMIO_BTCOEX_TXCTL, 0xFF);
}

static void lpphy_pr41573_workaround(struct b43_wldev *dev)
{
	struct b43_phy_lp *lpphy = dev->phy.lp;
	u32 *saved_tab;
	const unsigned int saved_tab_size = 256;
	enum b43_lpphy_txpctl_mode txpctl_mode;
	s8 tx_pwr_idx_over;
	u16 tssi_npt, tssi_idx;

	saved_tab = kcalloc(saved_tab_size, sizeof(saved_tab[0]), GFP_KERNEL);
	if (!saved_tab) {
		b43err(dev->wl, "PR41573 failed. Out of memory!\n");
		return;
	}

	lpphy_read_tx_pctl_mode_from_hardware(dev);
	txpctl_mode = lpphy->txpctl_mode;
	tx_pwr_idx_over = lpphy->tx_pwr_idx_over;
	tssi_npt = lpphy->tssi_npt;
	tssi_idx = lpphy->tssi_idx;

	if (dev->phy.rev < 2) {
		b43_lptab_read_bulk(dev, B43_LPTAB32(10, 0x140),
				    saved_tab_size, saved_tab);
	} else {
		b43_lptab_read_bulk(dev, B43_LPTAB32(7, 0x140),
				    saved_tab_size, saved_tab);
	}
	//TODO

	kfree(saved_tab);
}

static void lpphy_calibration(struct b43_wldev *dev)
{
	struct b43_phy_lp *lpphy = dev->phy.lp;
	enum b43_lpphy_txpctl_mode saved_pctl_mode;

	b43_mac_suspend(dev);

	lpphy_btcoex_override(dev);
	lpphy_read_tx_pctl_mode_from_hardware(dev);
	saved_pctl_mode = lpphy->txpctl_mode;
	lpphy_set_tx_power_control(dev, B43_LPPHY_TXPCTL_OFF);
	//TODO Perform transmit power table I/Q LO calibration
	if ((dev->phy.rev == 0) && (saved_pctl_mode != B43_LPPHY_TXPCTL_OFF))
		lpphy_pr41573_workaround(dev);
	//TODO If a full calibration has not been performed on this channel yet, perform PAPD TX-power calibration
	lpphy_set_tx_power_control(dev, saved_pctl_mode);
	//TODO Perform I/Q calibration with a single control value set

	b43_mac_enable(dev);
}

/* Initialize TX power control */
static void lpphy_tx_pctl_init(struct b43_wldev *dev)
{
	if (0/*FIXME HWPCTL capable */) {
		//TODO
	} else { /* This device is only software TX power control capable. */
		if (b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ) {
			//TODO
		} else {
			//TODO
		}
		//TODO set BB multiplier to 0x0096
	}
}

M
Michael Buesch 已提交
695 696
static int b43_lpphy_op_init(struct b43_wldev *dev)
{
697 698 699
	/* TODO: band SPROM */
	lpphy_baseband_init(dev);
	lpphy_radio_init(dev);
700 701 702
	//TODO calibrate RC
	//TODO set channel
	lpphy_tx_pctl_init(dev);
703 704
	lpphy_calibration(dev);
	//TODO ACI init
M
Michael Buesch 已提交
705 706 707 708

	return 0;
}

M
Michael Buesch 已提交
709 710
static u16 b43_lpphy_op_read(struct b43_wldev *dev, u16 reg)
{
711 712
	b43_write16(dev, B43_MMIO_PHY_CONTROL, reg);
	return b43_read16(dev, B43_MMIO_PHY_DATA);
M
Michael Buesch 已提交
713 714 715 716
}

static void b43_lpphy_op_write(struct b43_wldev *dev, u16 reg, u16 value)
{
717 718
	b43_write16(dev, B43_MMIO_PHY_CONTROL, reg);
	b43_write16(dev, B43_MMIO_PHY_DATA, value);
M
Michael Buesch 已提交
719 720 721 722
}

static u16 b43_lpphy_op_radio_read(struct b43_wldev *dev, u16 reg)
{
723 724 725 726 727 728 729 730 731 732 733
	/* Register 1 is a 32-bit register. */
	B43_WARN_ON(reg == 1);
	/* LP-PHY needs a special bit set for read access */
	if (dev->phy.rev < 2) {
		if (reg != 0x4001)
			reg |= 0x100;
	} else
		reg |= 0x200;

	b43_write16(dev, B43_MMIO_RADIO_CONTROL, reg);
	return b43_read16(dev, B43_MMIO_RADIO_DATA_LOW);
M
Michael Buesch 已提交
734 735 736 737 738 739 740
}

static void b43_lpphy_op_radio_write(struct b43_wldev *dev, u16 reg, u16 value)
{
	/* Register 1 is a 32-bit register. */
	B43_WARN_ON(reg == 1);

741 742
	b43_write16(dev, B43_MMIO_RADIO_CONTROL, reg);
	b43_write16(dev, B43_MMIO_RADIO_DATA_LOW, value);
M
Michael Buesch 已提交
743 744 745
}

static void b43_lpphy_op_software_rfkill(struct b43_wldev *dev,
J
Johannes Berg 已提交
746
					 bool blocked)
M
Michael Buesch 已提交
747 748 749 750 751 752 753 754 755 756 757 758 759
{
	//TODO
}

static int b43_lpphy_op_switch_channel(struct b43_wldev *dev,
				       unsigned int new_channel)
{
	//TODO
	return 0;
}

static unsigned int b43_lpphy_op_get_default_chan(struct b43_wldev *dev)
{
M
Michael Buesch 已提交
760 761 762
	if (b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ)
		return 1;
	return 36;
M
Michael Buesch 已提交
763 764 765 766 767 768 769 770 771 772 773 774 775 776 777 778 779 780 781 782 783
}

static void b43_lpphy_op_set_rx_antenna(struct b43_wldev *dev, int antenna)
{
	//TODO
}

static void b43_lpphy_op_adjust_txpower(struct b43_wldev *dev)
{
	//TODO
}

static enum b43_txpwr_result b43_lpphy_op_recalc_txpower(struct b43_wldev *dev,
							 bool ignore_tssi)
{
	//TODO
	return B43_TXPWR_RES_DONE;
}

const struct b43_phy_operations b43_phyops_lp = {
	.allocate		= b43_lpphy_op_allocate,
M
Michael Buesch 已提交
784 785
	.free			= b43_lpphy_op_free,
	.prepare_structs	= b43_lpphy_op_prepare_structs,
M
Michael Buesch 已提交
786 787 788 789 790 791
	.init			= b43_lpphy_op_init,
	.phy_read		= b43_lpphy_op_read,
	.phy_write		= b43_lpphy_op_write,
	.radio_read		= b43_lpphy_op_radio_read,
	.radio_write		= b43_lpphy_op_radio_write,
	.software_rfkill	= b43_lpphy_op_software_rfkill,
792
	.switch_analog		= b43_phyop_switch_analog_generic,
M
Michael Buesch 已提交
793 794 795 796 797 798
	.switch_channel		= b43_lpphy_op_switch_channel,
	.get_default_chan	= b43_lpphy_op_get_default_chan,
	.set_rx_antenna		= b43_lpphy_op_set_rx_antenna,
	.recalc_txpower		= b43_lpphy_op_recalc_txpower,
	.adjust_txpower		= b43_lpphy_op_adjust_txpower,
};