b43: Move Analog switching into phy code

This moves the Analog switching code into the PHY files.
Signed-off-by: NMichael Buesch <mb@bu3sch.de>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

drivers/net/wireless/b43/main.c

@@ -1052,23 +1052,6 @@ void b43_power_saving_ctl_bits(struct b43_wldev *dev, unsigned int ps_flags)
 	}
 }
 
-/* Turn the Analog ON/OFF */
-static void b43_switch_analog(struct b43_wldev *dev, int on)
-{
-	switch (dev->phy.type) {
-	case B43_PHYTYPE_A:
-	case B43_PHYTYPE_G:
-		b43_write16(dev, B43_MMIO_PHY0, on ? 0 : 0xF4);
-		break;
-	case B43_PHYTYPE_N:
-		b43_phy_write(dev, B43_NPHY_AFECTL_OVER,
-			      on ? 0 : 0x7FFF);
-		break;
-	default:
-		B43_WARN_ON(1);
-	}
-}
-
 void b43_wireless_core_reset(struct b43_wldev *dev, u32 flags)
 {
 	u32 tmslow;
@@ -1096,7 +1079,7 @@ void b43_wireless_core_reset(struct b43_wldev *dev, u32 flags)
 	 * PHY-type, yet. wireless_core_reset will be called once again later,
 	 * when we know the PHY-type. */
 	if (dev->phy.ops)
-		b43_switch_analog(dev, 1);
+		dev->phy.ops->switch_analog(dev, 1);
 
 	macctl = b43_read32(dev, B43_MMIO_MACCTL);
 	macctl &= ~B43_MACCTL_GMODE;
@@ -3952,7 +3935,7 @@ static void b43_wireless_core_exit(struct b43_wldev *dev)
 	b43_dma_free(dev);
 	b43_pio_free(dev);
 	b43_chip_exit(dev);
-	b43_switch_analog(dev, 0);
+	dev->phy.ops->switch_analog(dev, 0);
 	if (dev->wl->current_beacon) {
 		dev_kfree_skb_any(dev->wl->current_beacon);
 		dev->wl->current_beacon = NULL;
@@ -4437,7 +4420,7 @@ static int b43_wireless_core_attach(struct b43_wldev *dev)
 		wl->current_dev = dev;
 	INIT_WORK(&dev->restart_work, b43_chip_reset);
 
-	b43_switch_analog(dev, 0);
+	dev->phy.ops->switch_analog(dev, 0);
 	ssb_device_disable(dev->dev, 0);
 	ssb_bus_may_powerdown(bus);
 

drivers/net/wireless/b43/phy_a.c

@@ -632,6 +632,7 @@ const struct b43_phy_operations b43_phyops_a = {
 	.radio_write		= b43_aphy_op_radio_write,
 	.supports_hwpctl	= b43_aphy_op_supports_hwpctl,
 	.software_rfkill	= b43_aphy_op_software_rfkill,
+	.switch_analog		= b43_phyop_switch_analog_generic,
 	.switch_channel		= b43_aphy_op_switch_channel,
 	.get_default_chan	= b43_aphy_op_get_default_chan,
 	.set_rx_antenna		= b43_aphy_op_set_rx_antenna,

drivers/net/wireless/b43/phy_common.c

@@ -374,3 +374,8 @@ int b43_phy_shm_tssi_read(struct b43_wldev *dev, u16 shm_offset)
 
 	return average;
 }
+
+void b43_phyop_switch_analog_generic(struct b43_wldev *dev, bool on)
+{
+	b43_write16(dev, B43_MMIO_PHY0, on ? 0 : 0xF4);
+}

drivers/net/wireless/b43/phy_common.h

@@ -108,6 +108,8 @@ enum b43_txpwr_result {
  * 			RFKILL_STATE_SOFT_BLOCKED or
  * 			RFKILL_STATE_UNBLOCKED
  * 			Must not be NULL.
+ * @switch_analog:	Turn the Analog on/off.
+ * 			Must not be NULL.
  * @switch_channel:	Switch the radio to another channel.
  * 			Must not be NULL.
  * @get_default_chan:	Just returns the default channel number.
@@ -158,6 +160,7 @@ struct b43_phy_operations {
 	/* Radio */
 	bool (*supports_hwpctl)(struct b43_wldev *dev);
 	void (*software_rfkill)(struct b43_wldev *dev, enum rfkill_state state);
+	void (*switch_analog)(struct b43_wldev *dev, bool on);
 	int (*switch_channel)(struct b43_wldev *dev, unsigned int new_channel);
 	unsigned int (*get_default_chan)(struct b43_wldev *dev);
 	void (*set_rx_antenna)(struct b43_wldev *dev, int antenna);
@@ -397,5 +400,14 @@ void b43_phy_txpower_adjust_work(struct work_struct *work);
  */
 int b43_phy_shm_tssi_read(struct b43_wldev *dev, u16 shm_offset);
 
+/**
+ * b43_phy_switch_analog_generic - Generic PHY operation for switching the Analog.
+ *
+ * It does the switching based on the PHY0 core register.
+ * Do _not_ call this directly. Only use it as a switch_analog callback
+ * for struct b43_phy_operations.
+ */
+void b43_phyop_switch_analog_generic(struct b43_wldev *dev, bool on);
+
 
 #endif /* LINUX_B43_PHY_COMMON_H_ */

drivers/net/wireless/b43/phy_g.c

@@ -3271,6 +3271,7 @@ const struct b43_phy_operations b43_phyops_g = {
 	.radio_write		= b43_gphy_op_radio_write,
 	.supports_hwpctl	= b43_gphy_op_supports_hwpctl,
 	.software_rfkill	= b43_gphy_op_software_rfkill,
+	.switch_analog		= b43_phyop_switch_analog_generic,
 	.switch_channel		= b43_gphy_op_switch_channel,
 	.get_default_chan	= b43_gphy_op_get_default_chan,
 	.set_rx_antenna		= b43_gphy_op_set_rx_antenna,

drivers/net/wireless/b43/phy_lp.c

@@ -146,6 +146,7 @@ const struct b43_phy_operations b43_phyops_lp = {
 	.radio_read		= b43_lpphy_op_radio_read,
 	.radio_write		= b43_lpphy_op_radio_write,
 	.software_rfkill	= b43_lpphy_op_software_rfkill,
+	.switch_analog		= b43_phyop_switch_analog_generic,
 	.switch_channel		= b43_lpphy_op_switch_channel,
 	.get_default_chan	= b43_lpphy_op_get_default_chan,
 	.set_rx_antenna		= b43_lpphy_op_set_rx_antenna,

drivers/net/wireless/b43/phy_n.c

@@ -583,6 +583,12 @@ static void b43_nphy_op_software_rfkill(struct b43_wldev *dev,
 {//TODO
 }
 
+static void b43_nphy_op_switch_analog(struct b43_wldev *dev, bool on)
+{
+	b43_phy_write(dev, B43_NPHY_AFECTL_OVER,
+		      on ? 0 : 0x7FFF);
+}
+
 static int b43_nphy_op_switch_channel(struct b43_wldev *dev,
 				      unsigned int new_channel)
 {
@@ -614,6 +620,7 @@ const struct b43_phy_operations b43_phyops_n = {
 	.radio_read		= b43_nphy_op_radio_read,
 	.radio_write		= b43_nphy_op_radio_write,
 	.software_rfkill	= b43_nphy_op_software_rfkill,
+	.switch_analog		= b43_nphy_op_switch_analog,
 	.switch_channel		= b43_nphy_op_switch_channel,
 	.get_default_chan	= b43_nphy_op_get_default_chan,
 	.recalc_txpower		= b43_nphy_op_recalc_txpower,