em28xx-cards.c 101.3 KB
Newer Older
1
/*
2 3
   em28xx-cards.c - driver for Empia EM2800/EM2820/2840 USB
		    video capture devices
4

5 6
   Copyright (C) 2005 Ludovico Cavedon <cavedon@sssup.it>
		      Markus Rechberger <mrechberger@gmail.com>
7
		      Mauro Carvalho Chehab <mchehab@infradead.org>
8
		      Sascha Sommer <saschasommer@freenet.de>
9
   Copyright (C) 2012 Frank Schäfer <fschaefer.oss@googlemail.com>
10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27

   This program is free software; you can redistribute it and/or modify
   it under the terms of the GNU General Public License as published by
   the Free Software Foundation; either version 2 of the License, or
   (at your option) any later version.

   This program is distributed in the hope that it will be useful,
   but WITHOUT ANY WARRANTY; without even the implied warranty of
   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
   GNU General Public License for more details.

   You should have received a copy of the GNU General Public License
   along with this program; if not, write to the Free Software
   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
 */

#include <linux/init.h>
#include <linux/module.h>
28
#include <linux/slab.h>
29 30 31 32
#include <linux/delay.h>
#include <linux/i2c.h>
#include <linux/usb.h>
#include <media/tuner.h>
33
#include <media/msp3400.h>
34 35
#include <media/saa7115.h>
#include <media/tvp5150.h>
36 37
#include <media/tvaudio.h>
#include <media/i2c-addr.h>
38
#include <media/tveeprom.h>
39
#include <media/v4l2-common.h>
40

41
#include "em28xx.h"
42

43 44
#define DRIVER_NAME         "em28xx"

45 46 47 48
static int tuner = -1;
module_param(tuner, int, 0444);
MODULE_PARM_DESC(tuner, "tuner type");

49 50 51 52
static unsigned int disable_ir;
module_param(disable_ir, int, 0444);
MODULE_PARM_DESC(disable_ir, "disable infrared remote support");

53 54 55 56 57
static unsigned int disable_usb_speed_check;
module_param(disable_usb_speed_check, int, 0444);
MODULE_PARM_DESC(disable_usb_speed_check,
		 "override min bandwidth requirement of 480M bps");

58
static unsigned int card[]     = {[0 ... (EM28XX_MAXBOARDS - 1)] = -1U };
59 60 61
module_param_array(card,  int, NULL, 0444);
MODULE_PARM_DESC(card,     "card type");

62 63 64 65
static int usb_xfer_mode = -1;
module_param(usb_xfer_mode, int, 0444);
MODULE_PARM_DESC(usb_xfer_mode,
		 "USB transfer mode for frame data (-1 = auto, 0 = prefer isoc, 1 = prefer bulk)");
66 67


68
/* Bitmask marking allocated devices from 0 to EM28XX_MAXBOARDS - 1 */
69 70
static unsigned long em28xx_devused;

71 72 73 74 75 76
struct em28xx_hash_table {
	unsigned long hash;
	unsigned int  model;
	unsigned int  tuner;
};

77 78
static void em28xx_pre_card_setup(struct em28xx *dev);

79 80 81 82 83 84
/*
 *  Reset sequences for analog/digital modes
 */

/* Reset for the most [analog] boards */
static struct em28xx_reg_seq default_analog[] = {
85
	{EM2820_R08_GPIO_CTRL,	0x6d,   ~EM_GPIO_4,	10},
86 87 88 89 90
	{	-1,		-1,	-1,		-1},
};

/* Reset for the most [digital] boards */
static struct em28xx_reg_seq default_digital[] = {
91
	{EM2820_R08_GPIO_CTRL,	0x6e,	~EM_GPIO_4,	10},
92 93 94 95 96
	{	-1,		-1,	-1,		-1},
};

/* Board Hauppauge WinTV HVR 900 analog */
static struct em28xx_reg_seq hauppauge_wintv_hvr_900_analog[] = {
97
	{EM2820_R08_GPIO_CTRL,	0x2d,	~EM_GPIO_4,	10},
98 99
	{	0x05,		0xff,	0x10,		10},
	{	-1,		-1,	-1,		-1},
100 101 102 103
};

/* Board Hauppauge WinTV HVR 900 digital */
static struct em28xx_reg_seq hauppauge_wintv_hvr_900_digital[] = {
104
	{EM2820_R08_GPIO_CTRL,	0x2e,	~EM_GPIO_4,	10},
105 106
	{EM2880_R04_GPO,	0x04,	0x0f,		10},
	{EM2880_R04_GPO,	0x0c,	0x0f,		10},
107
	{	-1,		-1,	-1,		-1},
108 109
};

110 111
/* Board Hauppauge WinTV HVR 900 (R2) digital */
static struct em28xx_reg_seq hauppauge_wintv_hvr_900R2_digital[] = {
112
	{EM2820_R08_GPIO_CTRL,	0x2e,	~EM_GPIO_4,	10},
113
	{EM2880_R04_GPO,	0x0c,	0x0f,		10},
114
	{	-1,		-1,	-1,		-1},
115 116
};

117 118
/* Boards - EM2880 MSI DIGIVOX AD and EM2880_BOARD_MSI_DIGIVOX_AD_II */
static struct em28xx_reg_seq em2880_msi_digivox_ad_analog[] = {
119 120
	{EM2820_R08_GPIO_CTRL,	0x69,   ~EM_GPIO_4,	10},
	{	-1,		-1,	-1,		-1},
121 122 123 124 125 126 127
};

/* Boards - EM2880 MSI DIGIVOX AD and EM2880_BOARD_MSI_DIGIVOX_AD_II */

/* Board  - EM2870 Kworld 355u
   Analog - No input analog */

128 129
/* Board - EM2882 Kworld 315U digital */
static struct em28xx_reg_seq em2882_kworld_315u_digital[] = {
130 131
	{EM2820_R08_GPIO_CTRL,	0xff,	0xff,		10},
	{EM2820_R08_GPIO_CTRL,	0xfe,	0xff,		10},
132 133
	{EM2880_R04_GPO,	0x04,	0xff,		10},
	{EM2880_R04_GPO,	0x0c,	0xff,		10},
134
	{EM2820_R08_GPIO_CTRL,	0x7e,	0xff,		10},
135
	{	-1,		-1,	-1,		-1},
136 137 138 139 140 141 142
};

static struct em28xx_reg_seq em2882_kworld_315u_tuner_gpio[] = {
	{EM2880_R04_GPO,	0x08,	0xff,		10},
	{EM2880_R04_GPO,	0x0c,	0xff,		10},
	{EM2880_R04_GPO,	0x08,	0xff,		10},
	{EM2880_R04_GPO,	0x0c,	0xff,		10},
143
	{	-1,		-1,	-1,		-1},
144 145
};

146
static struct em28xx_reg_seq kworld_330u_analog[] = {
147
	{EM2820_R08_GPIO_CTRL,	0x6d,	~EM_GPIO_4,	10},
148
	{EM2880_R04_GPO,	0x00,	0xff,		10},
149
	{	-1,		-1,	-1,		-1},
150 151 152
};

static struct em28xx_reg_seq kworld_330u_digital[] = {
153
	{EM2820_R08_GPIO_CTRL,	0x6e,	~EM_GPIO_4,	10},
154
	{EM2880_R04_GPO,	0x08,	0xff,		10},
155
	{	-1,		-1,	-1,		-1},
156 157
};

158 159 160 161 162 163 164
/* Evga inDtube
   GPIO0 - Enable digital power (s5h1409) - low to enable
   GPIO1 - Enable analog power (tvp5150/emp202) - low to enable
   GPIO4 - xc3028 reset
   GOP3  - s5h1409 reset
 */
static struct em28xx_reg_seq evga_indtube_analog[] = {
165
	{EM2820_R08_GPIO_CTRL,	0x79,   0xff,		60},
166 167 168 169
	{	-1,		-1,	-1,		-1},
};

static struct em28xx_reg_seq evga_indtube_digital[] = {
170
	{EM2820_R08_GPIO_CTRL,	0x7a,	0xff,		 1},
171 172
	{EM2880_R04_GPO,	0x04,	0xff,		10},
	{EM2880_R04_GPO,	0x0c,	0xff,		 1},
173
	{	-1,		-1,	-1,		-1},
174 175
};

176
/*
177
 * KWorld PlusTV 340U, UB435-Q and UB435-Q V2 (ATSC) GPIOs map:
178 179 180 181 182 183 184 185 186 187
 * EM_GPIO_0 - currently unknown
 * EM_GPIO_1 - LED disable/enable (1 = off, 0 = on)
 * EM_GPIO_2 - currently unknown
 * EM_GPIO_3 - currently unknown
 * EM_GPIO_4 - TDA18271HD/C1 tuner (1 = active, 0 = in reset)
 * EM_GPIO_5 - LGDT3304 ATSC/QAM demod (1 = active, 0 = in reset)
 * EM_GPIO_6 - currently unknown
 * EM_GPIO_7 - currently unknown
 */
static struct em28xx_reg_seq kworld_a340_digital[] = {
188 189
	{EM2820_R08_GPIO_CTRL,	0x6d,	~EM_GPIO_4,	10},
	{	-1,		-1,	-1,		-1},
190 191
};

192 193
/* Pinnacle Hybrid Pro eb1a:2881 */
static struct em28xx_reg_seq pinnacle_hybrid_pro_analog[] = {
194
	{EM2820_R08_GPIO_CTRL,	0xfd,   ~EM_GPIO_4,	10},
195 196 197 198
	{	-1,		-1,	-1,		-1},
};

static struct em28xx_reg_seq pinnacle_hybrid_pro_digital[] = {
199
	{EM2820_R08_GPIO_CTRL,	0x6e,	~EM_GPIO_4,	10},
200 201 202 203 204
	{EM2880_R04_GPO,	0x04,	0xff,	       100},/* zl10353 reset */
	{EM2880_R04_GPO,	0x0c,	0xff,		 1},
	{	-1,		-1,	-1,		-1},
};

205
static struct em28xx_reg_seq terratec_cinergy_USB_XS_FR_analog[] = {
206
	{EM2820_R08_GPIO_CTRL,	0x6d,	~EM_GPIO_4,	10},
207
	{EM2880_R04_GPO,	0x00,	0xff,		10},
208
	{	-1,		-1,	-1,		-1},
209 210 211
};

static struct em28xx_reg_seq terratec_cinergy_USB_XS_FR_digital[] = {
212
	{EM2820_R08_GPIO_CTRL,	0x6e,	~EM_GPIO_4,	10},
213
	{EM2880_R04_GPO,	0x08,	0xff,		10},
214
	{	-1,		-1,	-1,		-1},
215 216
};

217 218 219 220
/* eb1a:2868 Reddo DVB-C USB TV Box
   GPIO4 - CU1216L NIM
   Other GPIOs seems to be don't care. */
static struct em28xx_reg_seq reddo_dvb_c_usb_box[] = {
221 222 223 224 225 226 227
	{EM2820_R08_GPIO_CTRL,	0xfe,	0xff,		10},
	{EM2820_R08_GPIO_CTRL,	0xde,	0xff,		10},
	{EM2820_R08_GPIO_CTRL,	0xfe,	0xff,		10},
	{EM2820_R08_GPIO_CTRL,	0xff,	0xff,		10},
	{EM2820_R08_GPIO_CTRL,	0x7f,	0xff,		10},
	{EM2820_R08_GPIO_CTRL,	0x6f,	0xff,		10},
	{EM2820_R08_GPIO_CTRL,	0xff,	0xff,		10},
228
	{	-1,		-1,	-1,		-1},
229
};
230

231
/* Callback for the most boards */
232
static struct em28xx_reg_seq default_tuner_gpio[] = {
233 234 235
	{EM2820_R08_GPIO_CTRL,	EM_GPIO_4,	EM_GPIO_4,	10},
	{EM2820_R08_GPIO_CTRL,	0,		EM_GPIO_4,	10},
	{EM2820_R08_GPIO_CTRL,	EM_GPIO_4,	EM_GPIO_4,	10},
236
	{	-1,		-1,		-1,		-1},
237 238
};

239 240
/* Mute/unmute */
static struct em28xx_reg_seq compro_unmute_tv_gpio[] = {
241 242
	{EM2820_R08_GPIO_CTRL,	5,	7,	10},
	{	-1,		-1,	-1,	-1},
243 244 245
};

static struct em28xx_reg_seq compro_unmute_svid_gpio[] = {
246 247
	{EM2820_R08_GPIO_CTRL,	4,	7,	10},
	{	-1,		-1,	-1,	-1},
248 249 250
};

static struct em28xx_reg_seq compro_mute_gpio[] = {
251 252
	{EM2820_R08_GPIO_CTRL,	6,	7,	10},
	{	-1,		-1,	-1,	-1},
253 254
};

255 256
/* Terratec AV350 */
static struct em28xx_reg_seq terratec_av350_mute_gpio[] = {
257
	{EM2820_R08_GPIO_CTRL,	0xff,	0x7f,		10},
258 259 260 261
	{	-1,		-1,	-1,		-1},
};

static struct em28xx_reg_seq terratec_av350_unmute_gpio[] = {
262
	{EM2820_R08_GPIO_CTRL,	0xff,	0xff,		10},
263 264
	{	-1,		-1,	-1,		-1},
};
265 266

static struct em28xx_reg_seq silvercrest_reg_seq[] = {
267 268
	{EM2820_R08_GPIO_CTRL,	0xff,	0xff,		10},
	{EM2820_R08_GPIO_CTRL,	0x01,	0xf7,		10},
269 270 271
	{	-1,		-1,	-1,		-1},
};

272
static struct em28xx_reg_seq vc211a_enable[] = {
273 274 275
	{EM2820_R08_GPIO_CTRL,	0xff,	0x07,		10},
	{EM2820_R08_GPIO_CTRL,	0xff,	0x0f,		10},
	{EM2820_R08_GPIO_CTRL,	0xff,	0x0b,		10},
276 277 278
	{	-1,		-1,	-1,		-1},
};

279
static struct em28xx_reg_seq dikom_dk300_digital[] = {
280
	{EM2820_R08_GPIO_CTRL,	0x6e,	~EM_GPIO_4,	10},
281
	{EM2880_R04_GPO,	0x08,	0xff,		10},
282
	{	-1,		-1,	-1,		-1},
283 284
};

285

286 287
/* Reset for the most [digital] boards */
static struct em28xx_reg_seq leadership_digital[] = {
288
	{EM2874_R80_GPIO_P0_CTRL,	0x70,	0xff,	10},
289
	{	-1,			-1,	-1,	-1},
290 291 292
};

static struct em28xx_reg_seq leadership_reset[] = {
293 294 295
	{EM2874_R80_GPIO_P0_CTRL,	0xf0,	0xff,	10},
	{EM2874_R80_GPIO_P0_CTRL,	0xb0,	0xff,	10},
	{EM2874_R80_GPIO_P0_CTRL,	0xf0,	0xff,	10},
296
	{	-1,			-1,	-1,	-1},
297 298
};

299
/* 2013:024f PCTV nanoStick T2 290e
300 301 302 303
 * GPIO_6 - demod reset
 * GPIO_7 - LED
 */
static struct em28xx_reg_seq pctv_290e[] = {
304 305 306
	{EM2874_R80_GPIO_P0_CTRL,	0x00,	0xff,	80},
	{EM2874_R80_GPIO_P0_CTRL,	0x40,	0xff,	80}, /* GPIO_6 = 1 */
	{EM2874_R80_GPIO_P0_CTRL,	0xc0,	0xff,	80}, /* GPIO_7 = 1 */
307
	{	-1,			-1,	-1,	-1},
308
};
309

310 311
#if 0
static struct em28xx_reg_seq terratec_h5_gpio[] = {
312
	{EM2820_R08_GPIO_CTRL,		0xff,	0xff,	10},
313 314 315
	{EM2874_R80_GPIO_P0_CTRL,	0xf6,	0xff,	100},
	{EM2874_R80_GPIO_P0_CTRL,	0xf2,	0xff,	50},
	{EM2874_R80_GPIO_P0_CTRL,	0xf6,	0xff,	50},
316
	{	-1,			-1,	-1,	-1},
317 318 319
};

static struct em28xx_reg_seq terratec_h5_digital[] = {
320 321 322
	{EM2874_R80_GPIO_P0_CTRL,	0xf6,	0xff,	10},
	{EM2874_R80_GPIO_P0_CTRL,	0xe6,	0xff,	100},
	{EM2874_R80_GPIO_P0_CTRL,	0xa6,	0xff,	10},
323
	{	-1,			-1,	-1,	-1},
324 325 326
};
#endif

327 328 329 330 331 332 333 334 335 336 337
/* 2013:024f PCTV DVB-S2 Stick 460e
 * GPIO_0 - POWER_ON
 * GPIO_1 - BOOST
 * GPIO_2 - VUV_LNB (red LED)
 * GPIO_3 - EXT_12V
 * GPIO_4 - INT_DEM (DEMOD GPIO_0)
 * GPIO_5 - INT_LNB
 * GPIO_6 - RESET_DEM
 * GPIO_7 - LED (green LED)
 */
static struct em28xx_reg_seq pctv_460e[] = {
338 339 340 341 342 343
	{EM2874_R80_GPIO_P0_CTRL,	0x01,	0xff,	50},
	{	0x0d,			0xff,	0xff,	50},
	{EM2874_R80_GPIO_P0_CTRL,	0x41,	0xff,	50}, /* GPIO_6=1 */
	{	0x0d,			0x42,	0xff,	50},
	{EM2874_R80_GPIO_P0_CTRL,	0x61,	0xff,	50}, /* GPIO_5=1 */
	{	-1,			-1,	-1,	-1},
344 345
};

346
static struct em28xx_reg_seq c3tech_digital_duo_digital[] = {
347 348 349 350 351 352 353 354
	{EM2874_R80_GPIO_P0_CTRL,	0xff,	0xff,	10},
	{EM2874_R80_GPIO_P0_CTRL,	0xfd,	0xff,	10}, /* xc5000 reset */
	{EM2874_R80_GPIO_P0_CTRL,	0xf9,	0xff,	35},
	{EM2874_R80_GPIO_P0_CTRL,	0xfd,	0xff,	10},
	{EM2874_R80_GPIO_P0_CTRL,	0xff,	0xff,	10},
	{EM2874_R80_GPIO_P0_CTRL,	0xfe,	0xff,	10},
	{EM2874_R80_GPIO_P0_CTRL,	0xbe,	0xff,	10},
	{EM2874_R80_GPIO_P0_CTRL,	0xfe,	0xff,	20},
355
	{	-1,			-1,	-1,	-1},
356 357
};

358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379
/*
 * 2013:0258 PCTV DVB-S2 Stick (461e)
 * GPIO 0 = POWER_ON
 * GPIO 1 = BOOST
 * GPIO 2 = VUV_LNB (red LED)
 * GPIO 3 = #EXT_12V
 * GPIO 4 = INT_DEM
 * GPIO 5 = INT_LNB
 * GPIO 6 = #RESET_DEM
 * GPIO 7 = P07_LED (green LED)
 */
static struct em28xx_reg_seq pctv_461e[] = {
	{EM2874_R80_GPIO_P0_CTRL,      0x7f, 0xff,    0},
	{0x0d,                 0xff, 0xff,    0},
	{EM2874_R80_GPIO_P0_CTRL,      0x3f, 0xff,  100}, /* reset demod */
	{EM2874_R80_GPIO_P0_CTRL,      0x7f, 0xff,  200}, /* reset demod */
	{0x0d,                 0x42, 0xff,    0},
	{EM2874_R80_GPIO_P0_CTRL,      0xeb, 0xff,    0},
	{EM2874_R5F_TS_ENABLE, 0x84, 0x84,    0}, /* parallel? | null discard */
	{                  -1,   -1,   -1,   -1},
};

380
#if 0
381
static struct em28xx_reg_seq hauppauge_930c_gpio[] = {
382 383 384 385
	{EM2874_R80_GPIO_P0_CTRL,	0x6f,	0xff,	10},
	{EM2874_R80_GPIO_P0_CTRL,	0x4f,	0xff,	10}, /* xc5000 reset */
	{EM2874_R80_GPIO_P0_CTRL,	0x6f,	0xff,	10},
	{EM2874_R80_GPIO_P0_CTRL,	0x4f,	0xff,	10},
386
	{	-1,			-1,	-1,	-1},
387 388 389
};

static struct em28xx_reg_seq hauppauge_930c_digital[] = {
390 391 392
	{EM2874_R80_GPIO_P0_CTRL,	0xf6,	0xff,	10},
	{EM2874_R80_GPIO_P0_CTRL,	0xe6,	0xff,	100},
	{EM2874_R80_GPIO_P0_CTRL,	0xa6,	0xff,	10},
393
	{	-1,			-1,	-1,	-1},
394 395 396
};
#endif

397
/* 1b80:e425 MaxMedia UB425-TC
398
 * 1b80:e1cc Delock 61959
399 400 401 402
 * GPIO_6 - demod reset, 0=active
 * GPIO_7 - LED, 0=active
 */
static struct em28xx_reg_seq maxmedia_ub425_tc[] = {
403 404 405 406
	{EM2874_R80_GPIO_P0_CTRL,	0x83,	0xff,	100},
	{EM2874_R80_GPIO_P0_CTRL,	0xc3,	0xff,	100}, /* GPIO_6 = 1 */
	{EM2874_R80_GPIO_P0_CTRL,	0x43,	0xff,	000}, /* GPIO_7 = 0 */
	{	-1,			-1,	-1,	-1},
407 408
};

409 410 411 412 413 414 415
/* 2304:0242 PCTV QuatroStick (510e)
 * GPIO_2: decoder reset, 0=active
 * GPIO_4: decoder suspend, 0=active
 * GPIO_6: demod reset, 0=active
 * GPIO_7: LED, 1=active
 */
static struct em28xx_reg_seq pctv_510e[] = {
416 417 418 419
	{EM2874_R80_GPIO_P0_CTRL,	0x10,	0xff,	100},
	{EM2874_R80_GPIO_P0_CTRL,	0x14,	0xff,	100}, /* GPIO_2 = 1 */
	{EM2874_R80_GPIO_P0_CTRL,	0x54,	0xff,	050}, /* GPIO_6 = 1 */
	{	-1,			-1,	-1,	-1},
420 421
};

422 423 424 425 426 427 428
/* 2013:0251 PCTV QuatroStick nano (520e)
 * GPIO_2: decoder reset, 0=active
 * GPIO_4: decoder suspend, 0=active
 * GPIO_6: demod reset, 0=active
 * GPIO_7: LED, 1=active
 */
static struct em28xx_reg_seq pctv_520e[] = {
429 430 431 432 433
	{EM2874_R80_GPIO_P0_CTRL,	0x10,	0xff,	100},
	{EM2874_R80_GPIO_P0_CTRL,	0x14,	0xff,	100}, /* GPIO_2 = 1 */
	{EM2874_R80_GPIO_P0_CTRL,	0x54,	0xff,	050}, /* GPIO_6 = 1 */
	{EM2874_R80_GPIO_P0_CTRL,	0xd4,	0xff,	000}, /* GPIO_7 = 1 */
	{	-1,			-1,	-1,	-1},
434 435
};

436 437 438 439 440 441 442 443 444 445 446 447 448 449 450
/* 1ae7:9003/9004 SpeedLink Vicious And Devine Laplace webcam
 * reg 0x80/0x84:
 * GPIO_0: capturing LED, 0=on, 1=off
 * GPIO_2: AV mute button, 0=pressed, 1=unpressed
 * GPIO 3: illumination button, 0=pressed, 1=unpressed
 * GPIO_6: illumination/flash LED, 0=on, 1=off
 * reg 0x81/0x85:
 * GPIO_7: snapshot button, 0=pressed, 1=unpressed
 */
static struct em28xx_reg_seq speedlink_vad_laplace_reg_seq[] = {
	{EM2820_R08_GPIO_CTRL,		0xf7,	0xff,	10},
	{EM2874_R80_GPIO_P0_CTRL,	0xff,	0xb2,	10},
	{	-1,			-1,	-1,	-1},
};

451 452 453 454 455 456 457 458 459 460 461 462 463 464
/*
 *  Button definitions
 */
static struct em28xx_button std_snapshot_button[] = {
	{
		.role         = EM28XX_BUTTON_SNAPSHOT,
		.reg_r        = EM28XX_R0C_USBSUSP,
		.reg_clearing = EM28XX_R0C_USBSUSP,
		.mask         = EM28XX_R0C_USBSUSP_SNAPSHOT,
		.inverted     = 0,
	},
	{-1, 0, 0, 0, 0},
};

465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499
static struct em28xx_button speedlink_vad_laplace_buttons[] = {
	{
		.role     = EM28XX_BUTTON_SNAPSHOT,
		.reg_r    = EM2874_R85_GPIO_P1_STATE,
		.mask     = 0x80,
		.inverted = 1,
	},
	{
		.role     = EM28XX_BUTTON_ILLUMINATION,
		.reg_r    = EM2874_R84_GPIO_P0_STATE,
		.mask     = 0x08,
		.inverted = 1,
	},
	{-1, 0, 0, 0, 0},
};

/*
 *  LED definitions
 */
static struct em28xx_led speedlink_vad_laplace_leds[] = {
	{
		.role      = EM28XX_LED_ANALOG_CAPTURING,
		.gpio_reg  = EM2874_R80_GPIO_P0_CTRL,
		.gpio_mask = 0x01,
		.inverted  = 1,
	},
	{
		.role      = EM28XX_LED_ILLUMINATION,
		.gpio_reg  = EM2874_R80_GPIO_P0_CTRL,
		.gpio_mask = 0x40,
		.inverted  = 1,
	},
	{-1, 0, 0, 0},
};

500 501 502
/*
 *  Board definitions
 */
503
struct em28xx_board em28xx_boards[] = {
504
	[EM2750_BOARD_UNKNOWN] = {
505
		.name          = "EM2710/EM2750/EM2751 webcam grabber",
506
		.xclk          = EM28XX_XCLK_FREQUENCY_20MHZ,
507 508
		.tuner_type    = TUNER_ABSENT,
		.is_webcam     = 1,
509 510 511
		.input         = { {
			.type     = EM28XX_VMUX_COMPOSITE1,
			.vmux     = 0,
512
			.amux     = EM28XX_AMUX_VIDEO,
513
			.gpio     = silvercrest_reg_seq,
514 515
		} },
	},
516 517 518 519
	[EM2800_BOARD_UNKNOWN] = {
		.name         = "Unknown EM2800 video grabber",
		.is_em2800    = 1,
		.tda9887_conf = TDA9887_PRESENT,
520
		.decoder      = EM28XX_SAA711X,
521
		.tuner_type   = TUNER_ABSENT,
522
		.input        = { {
523
			.type     = EM28XX_VMUX_COMPOSITE1,
524
			.vmux     = SAA7115_COMPOSITE0,
525
			.amux     = EM28XX_AMUX_LINE_IN,
526
		}, {
527
			.type     = EM28XX_VMUX_SVIDEO,
528
			.vmux     = SAA7115_SVIDEO3,
529
			.amux     = EM28XX_AMUX_LINE_IN,
530
		} },
531 532
	},
	[EM2820_BOARD_UNKNOWN] = {
533 534
		.name          = "Unknown EM2750/28xx video grabber",
		.tuner_type    = TUNER_ABSENT,
535
		.is_webcam     = 1,	/* To enable sensor probe */
536
	},
537 538 539 540
	[EM2750_BOARD_DLCW_130] = {
		/* Beijing Huaqi Information Digital Technology Co., Ltd */
		.name          = "Huaqi DLCW-130",
		.valid         = EM28XX_BOARD_NOT_VALIDATED,
541
		.xclk          = EM28XX_XCLK_FREQUENCY_48MHZ,
542 543
		.tuner_type    = TUNER_ABSENT,
		.is_webcam     = 1,
544 545 546
		.input         = { {
			.type     = EM28XX_VMUX_COMPOSITE1,
			.vmux     = 0,
547
			.amux     = EM28XX_AMUX_VIDEO,
548 549
		} },
	},
550
	[EM2820_BOARD_KWORLD_PVRTV2800RF] = {
551
		.name         = "Kworld PVR TV 2800 RF",
552
		.tuner_type   = TUNER_TEMIC_PAL,
553
		.tda9887_conf = TDA9887_PRESENT,
554
		.decoder      = EM28XX_SAA711X,
555
		.input        = { {
556
			.type     = EM28XX_VMUX_COMPOSITE1,
557
			.vmux     = SAA7115_COMPOSITE0,
558
			.amux     = EM28XX_AMUX_LINE_IN,
559
		}, {
560
			.type     = EM28XX_VMUX_SVIDEO,
561
			.vmux     = SAA7115_SVIDEO3,
562
			.amux     = EM28XX_AMUX_LINE_IN,
563
		} },
564
	},
565 566 567 568 569 570 571 572 573 574 575 576 577 578 579 580 581 582 583
	[EM2820_BOARD_GADMEI_TVR200] = {
		.name         = "Gadmei TVR200",
		.tuner_type   = TUNER_LG_PAL_NEW_TAPC,
		.tda9887_conf = TDA9887_PRESENT,
		.decoder      = EM28XX_SAA711X,
		.input        = { {
			.type     = EM28XX_VMUX_TELEVISION,
			.vmux     = SAA7115_COMPOSITE2,
			.amux     = EM28XX_AMUX_LINE_IN,
		}, {
			.type     = EM28XX_VMUX_COMPOSITE1,
			.vmux     = SAA7115_COMPOSITE0,
			.amux     = EM28XX_AMUX_LINE_IN,
		}, {
			.type     = EM28XX_VMUX_SVIDEO,
			.vmux     = SAA7115_SVIDEO3,
			.amux     = EM28XX_AMUX_LINE_IN,
		} },
	},
584 585 586
	[EM2820_BOARD_TERRATEC_CINERGY_250] = {
		.name         = "Terratec Cinergy 250 USB",
		.tuner_type   = TUNER_LG_PAL_NEW_TAPC,
587
		.has_ir_i2c   = 1,
588
		.tda9887_conf = TDA9887_PRESENT,
589
		.decoder      = EM28XX_SAA711X,
590
		.input        = { {
591
			.type     = EM28XX_VMUX_TELEVISION,
592
			.vmux     = SAA7115_COMPOSITE2,
593
			.amux     = EM28XX_AMUX_VIDEO,
594
		}, {
595
			.type     = EM28XX_VMUX_COMPOSITE1,
596
			.vmux     = SAA7115_COMPOSITE0,
597
			.amux     = EM28XX_AMUX_LINE_IN,
598
		}, {
599
			.type     = EM28XX_VMUX_SVIDEO,
600
			.vmux     = SAA7115_SVIDEO3,
601
			.amux     = EM28XX_AMUX_LINE_IN,
602
		} },
603 604 605 606
	},
	[EM2820_BOARD_PINNACLE_USB_2] = {
		.name         = "Pinnacle PCTV USB 2",
		.tuner_type   = TUNER_LG_PAL_NEW_TAPC,
607
		.has_ir_i2c   = 1,
608
		.tda9887_conf = TDA9887_PRESENT,
609
		.decoder      = EM28XX_SAA711X,
610
		.input        = { {
611
			.type     = EM28XX_VMUX_TELEVISION,
612
			.vmux     = SAA7115_COMPOSITE2,
613
			.amux     = EM28XX_AMUX_VIDEO,
614
		}, {
615
			.type     = EM28XX_VMUX_COMPOSITE1,
616
			.vmux     = SAA7115_COMPOSITE0,
617
			.amux     = EM28XX_AMUX_LINE_IN,
618
		}, {
619
			.type     = EM28XX_VMUX_SVIDEO,
620
			.vmux     = SAA7115_SVIDEO3,
621
			.amux     = EM28XX_AMUX_LINE_IN,
622
		} },
623 624 625 626
	},
	[EM2820_BOARD_HAUPPAUGE_WINTV_USB_2] = {
		.name         = "Hauppauge WinTV USB 2",
		.tuner_type   = TUNER_PHILIPS_FM1236_MK3,
627
		.tda9887_conf = TDA9887_PRESENT |
628
				TDA9887_PORT1_ACTIVE |
629
				TDA9887_PORT2_ACTIVE,
630
		.decoder      = EM28XX_TVP5150,
631
		.has_msp34xx  = 1,
632
		.has_ir_i2c   = 1,
633
		.input        = { {
634
			.type     = EM28XX_VMUX_TELEVISION,
635
			.vmux     = TVP5150_COMPOSITE0,
636
			.amux     = MSP_INPUT_DEFAULT,
637
		}, {
638
			.type     = EM28XX_VMUX_SVIDEO,
639
			.vmux     = TVP5150_SVIDEO,
640 641
			.amux     = MSP_INPUT(MSP_IN_SCART1, MSP_IN_TUNER1,
					MSP_DSP_IN_SCART, MSP_DSP_IN_SCART),
642
		} },
643
	},
644 645 646 647 648
	[EM2820_BOARD_DLINK_USB_TV] = {
		.name         = "D-Link DUB-T210 TV Tuner",
		.valid        = EM28XX_BOARD_NOT_VALIDATED,
		.tuner_type   = TUNER_LG_PAL_NEW_TAPC,
		.tda9887_conf = TDA9887_PRESENT,
649
		.decoder      = EM28XX_SAA711X,
650
		.input        = { {
651 652
			.type     = EM28XX_VMUX_TELEVISION,
			.vmux     = SAA7115_COMPOSITE2,
653
			.amux     = EM28XX_AMUX_LINE_IN,
654 655 656
		}, {
			.type     = EM28XX_VMUX_COMPOSITE1,
			.vmux     = SAA7115_COMPOSITE0,
657
			.amux     = EM28XX_AMUX_LINE_IN,
658 659 660
		}, {
			.type     = EM28XX_VMUX_SVIDEO,
			.vmux     = SAA7115_SVIDEO3,
661
			.amux     = EM28XX_AMUX_LINE_IN,
662 663 664 665 666 667 668
		} },
	},
	[EM2820_BOARD_HERCULES_SMART_TV_USB2] = {
		.name         = "Hercules Smart TV USB 2.0",
		.valid        = EM28XX_BOARD_NOT_VALIDATED,
		.tuner_type   = TUNER_LG_PAL_NEW_TAPC,
		.tda9887_conf = TDA9887_PRESENT,
669
		.decoder      = EM28XX_SAA711X,
670 671 672
		.input        = { {
			.type     = EM28XX_VMUX_TELEVISION,
			.vmux     = SAA7115_COMPOSITE2,
673
			.amux     = EM28XX_AMUX_LINE_IN,
674 675 676
		}, {
			.type     = EM28XX_VMUX_COMPOSITE1,
			.vmux     = SAA7115_COMPOSITE0,
677
			.amux     = EM28XX_AMUX_LINE_IN,
678 679 680
		}, {
			.type     = EM28XX_VMUX_SVIDEO,
			.vmux     = SAA7115_SVIDEO3,
681
			.amux     = EM28XX_AMUX_LINE_IN,
682 683 684 685 686 687 688
		} },
	},
	[EM2820_BOARD_PINNACLE_USB_2_FM1216ME] = {
		.name         = "Pinnacle PCTV USB 2 (Philips FM1216ME)",
		.valid        = EM28XX_BOARD_NOT_VALIDATED,
		.tuner_type   = TUNER_PHILIPS_FM1216ME_MK3,
		.tda9887_conf = TDA9887_PRESENT,
689
		.decoder      = EM28XX_SAA711X,
690
		.input        = { {
691 692
			.type     = EM28XX_VMUX_TELEVISION,
			.vmux     = SAA7115_COMPOSITE2,
693
			.amux     = EM28XX_AMUX_VIDEO,
694 695 696
		}, {
			.type     = EM28XX_VMUX_COMPOSITE1,
			.vmux     = SAA7115_COMPOSITE0,
697
			.amux     = EM28XX_AMUX_LINE_IN,
698 699 700
		}, {
			.type     = EM28XX_VMUX_SVIDEO,
			.vmux     = SAA7115_SVIDEO3,
701
			.amux     = EM28XX_AMUX_LINE_IN,
702 703 704 705 706 707 708
		} },
	},
	[EM2820_BOARD_GADMEI_UTV310] = {
		.name         = "Gadmei UTV310",
		.valid        = EM28XX_BOARD_NOT_VALIDATED,
		.tuner_type   = TUNER_TNF_5335MF,
		.tda9887_conf = TDA9887_PRESENT,
709
		.decoder      = EM28XX_SAA711X,
710
		.input        = { {
711 712
			.type     = EM28XX_VMUX_TELEVISION,
			.vmux     = SAA7115_COMPOSITE1,
713
			.amux     = EM28XX_AMUX_LINE_IN,
714 715 716
		}, {
			.type     = EM28XX_VMUX_COMPOSITE1,
			.vmux     = SAA7115_COMPOSITE0,
717
			.amux     = EM28XX_AMUX_LINE_IN,
718 719 720
		}, {
			.type     = EM28XX_VMUX_SVIDEO,
			.vmux     = SAA7115_SVIDEO3,
721
			.amux     = EM28XX_AMUX_LINE_IN,
722 723 724 725 726 727
		} },
	},
	[EM2820_BOARD_LEADTEK_WINFAST_USBII_DELUXE] = {
		.name         = "Leadtek Winfast USB II Deluxe",
		.valid        = EM28XX_BOARD_NOT_VALIDATED,
		.tuner_type   = TUNER_PHILIPS_FM1216ME_MK3,
728 729 730 731 732
		.has_ir_i2c   = 1,
		.tvaudio_addr = 0x58,
		.tda9887_conf = TDA9887_PRESENT |
				TDA9887_PORT2_ACTIVE |
				TDA9887_QSS,
733
		.decoder      = EM28XX_SAA711X,
734
		.adecoder     = EM28XX_TVAUDIO,
735
		.input        = { {
736
			.type     = EM28XX_VMUX_TELEVISION,
737 738
			.vmux     = SAA7115_COMPOSITE4,
			.amux     = EM28XX_AMUX_AUX,
739 740
		}, {
			.type     = EM28XX_VMUX_COMPOSITE1,
741
			.vmux     = SAA7115_COMPOSITE5,
742
			.amux     = EM28XX_AMUX_LINE_IN,
743 744
		}, {
			.type     = EM28XX_VMUX_SVIDEO,
745
			.vmux     = SAA7115_SVIDEO3,
746
			.amux     = EM28XX_AMUX_LINE_IN,
747
		} },
748 749 750 751
			.radio	  = {
			.type     = EM28XX_RADIO,
			.amux     = EM28XX_AMUX_AUX,
			}
752 753
	},
	[EM2820_BOARD_VIDEOLOGY_20K14XUSB] = {
754
		.name         = "Videology 20K14XUSB USB2.0",
755
		.valid        = EM28XX_BOARD_NOT_VALIDATED,
756 757
		.tuner_type   = TUNER_ABSENT,
		.is_webcam    = 1,
758
		.input        = { {
759 760
			.type     = EM28XX_VMUX_COMPOSITE1,
			.vmux     = 0,
761
			.amux     = EM28XX_AMUX_VIDEO,
762 763
		} },
	},
764 765 766
	[EM2820_BOARD_SILVERCREST_WEBCAM] = {
		.name         = "Silvercrest Webcam 1.3mpix",
		.tuner_type   = TUNER_ABSENT,
767
		.is_webcam    = 1,
768 769 770 771 772 773 774
		.input        = { {
			.type     = EM28XX_VMUX_COMPOSITE1,
			.vmux     = 0,
			.amux     = EM28XX_AMUX_VIDEO,
			.gpio     = silvercrest_reg_seq,
		} },
	},
775 776 777 778 779 780 781
	[EM2821_BOARD_SUPERCOMP_USB_2] = {
		.name         = "Supercomp USB 2.0 TV",
		.valid        = EM28XX_BOARD_NOT_VALIDATED,
		.tuner_type   = TUNER_PHILIPS_FM1236_MK3,
		.tda9887_conf = TDA9887_PRESENT |
				TDA9887_PORT1_ACTIVE |
				TDA9887_PORT2_ACTIVE,
782
		.decoder      = EM28XX_SAA711X,
783
		.input        = { {
784 785
			.type     = EM28XX_VMUX_TELEVISION,
			.vmux     = SAA7115_COMPOSITE2,
786
			.amux     = EM28XX_AMUX_LINE_IN,
787 788 789
		}, {
			.type     = EM28XX_VMUX_COMPOSITE1,
			.vmux     = SAA7115_COMPOSITE0,
790
			.amux     = EM28XX_AMUX_VIDEO,
791 792 793
		}, {
			.type     = EM28XX_VMUX_SVIDEO,
			.vmux     = SAA7115_SVIDEO3,
794
			.amux     = EM28XX_AMUX_LINE_IN,
795 796 797
		} },
	},
	[EM2821_BOARD_USBGEAR_VD204] = {
798
		.name         = "Usbgear VD204v9",
799
		.valid        = EM28XX_BOARD_NOT_VALIDATED,
800
		.tuner_type   = TUNER_ABSENT,	/* Capture only device */
801
		.decoder      = EM28XX_SAA711X,
802
		.input        = { {
803 804
			.type  = EM28XX_VMUX_COMPOSITE1,
			.vmux  = SAA7115_COMPOSITE0,
805
			.amux  = EM28XX_AMUX_LINE_IN,
806 807 808
		}, {
			.type  = EM28XX_VMUX_SVIDEO,
			.vmux  = SAA7115_SVIDEO3,
809
			.amux  = EM28XX_AMUX_LINE_IN,
810 811 812 813
		} },
	},
	[EM2860_BOARD_NETGMBH_CAM] = {
		/* Beijing Huaqi Information Digital Technology Co., Ltd */
814 815
		.name         = "NetGMBH Cam",
		.valid        = EM28XX_BOARD_NOT_VALIDATED,
816 817
		.tuner_type   = TUNER_ABSENT,
		.is_webcam    = 1,
818
		.input        = { {
819 820
			.type     = EM28XX_VMUX_COMPOSITE1,
			.vmux     = 0,
821
			.amux     = EM28XX_AMUX_VIDEO,
822 823 824
		} },
	},
	[EM2860_BOARD_TYPHOON_DVD_MAKER] = {
825
		.name         = "Typhoon DVD Maker",
826
		.decoder      = EM28XX_SAA711X,
827
		.tuner_type   = TUNER_ABSENT,	/* Capture only device */
828
		.input        = { {
829 830
			.type  = EM28XX_VMUX_COMPOSITE1,
			.vmux  = SAA7115_COMPOSITE0,
831
			.amux  = EM28XX_AMUX_LINE_IN,
832 833 834
		}, {
			.type  = EM28XX_VMUX_SVIDEO,
			.vmux  = SAA7115_SVIDEO3,
835
			.amux  = EM28XX_AMUX_LINE_IN,
836 837 838 839 840 841
		} },
	},
	[EM2860_BOARD_GADMEI_UTV330] = {
		.name         = "Gadmei UTV330",
		.valid        = EM28XX_BOARD_NOT_VALIDATED,
		.tuner_type   = TUNER_TNF_5335MF,
842
		.tda9887_conf = TDA9887_PRESENT,
843
		.decoder      = EM28XX_SAA711X,
844
		.input        = { {
845 846
			.type     = EM28XX_VMUX_TELEVISION,
			.vmux     = SAA7115_COMPOSITE2,
847
			.amux     = EM28XX_AMUX_VIDEO,
848 849 850
		}, {
			.type     = EM28XX_VMUX_COMPOSITE1,
			.vmux     = SAA7115_COMPOSITE0,
851
			.amux     = EM28XX_AMUX_LINE_IN,
852 853 854
		}, {
			.type     = EM28XX_VMUX_SVIDEO,
			.vmux     = SAA7115_SVIDEO3,
855
			.amux     = EM28XX_AMUX_LINE_IN,
856 857
		} },
	},
858 859 860 861
	[EM2861_BOARD_GADMEI_UTV330PLUS] = {
		.name         = "Gadmei UTV330+",
		.tuner_type   = TUNER_TNF_5335MF,
		.tda9887_conf = TDA9887_PRESENT,
862
		.ir_codes     = RC_MAP_GADMEI_RM008Z,
863 864 865 866 867 868 869 870 871 872 873 874 875 876 877 878
		.decoder      = EM28XX_SAA711X,
		.xclk         = EM28XX_XCLK_FREQUENCY_12MHZ,
		.input        = { {
			.type     = EM28XX_VMUX_TELEVISION,
			.vmux     = SAA7115_COMPOSITE2,
			.amux     = EM28XX_AMUX_VIDEO,
		}, {
			.type     = EM28XX_VMUX_COMPOSITE1,
			.vmux     = SAA7115_COMPOSITE0,
			.amux     = EM28XX_AMUX_LINE_IN,
		}, {
			.type     = EM28XX_VMUX_SVIDEO,
			.vmux     = SAA7115_SVIDEO3,
			.amux     = EM28XX_AMUX_LINE_IN,
		} },
	},
879 880 881
	[EM2860_BOARD_TERRATEC_HYBRID_XS] = {
		.name         = "Terratec Cinergy A Hybrid XS",
		.valid        = EM28XX_BOARD_NOT_VALIDATED,
882
		.tuner_type   = TUNER_XC2028,
883
		.tuner_gpio   = default_tuner_gpio,
884
		.decoder      = EM28XX_TVP5150,
885

886
		.input        = { {
887 888
			.type     = EM28XX_VMUX_TELEVISION,
			.vmux     = TVP5150_COMPOSITE0,
889
			.amux     = EM28XX_AMUX_VIDEO,
890
			.gpio     = hauppauge_wintv_hvr_900_analog,
891
		}, {
892 893
			.type     = EM28XX_VMUX_COMPOSITE1,
			.vmux     = TVP5150_COMPOSITE1,
894
			.amux     = EM28XX_AMUX_LINE_IN,
895
			.gpio     = hauppauge_wintv_hvr_900_analog,
896
		}, {
897 898
			.type     = EM28XX_VMUX_SVIDEO,
			.vmux     = TVP5150_SVIDEO,
899
			.amux     = EM28XX_AMUX_LINE_IN,
900
			.gpio     = hauppauge_wintv_hvr_900_analog,
901
		} },
902
	},
903 904 905
	[EM2861_BOARD_KWORLD_PVRTV_300U] = {
		.name	      = "KWorld PVRTV 300U",
		.valid        = EM28XX_BOARD_NOT_VALIDATED,
906
		.tuner_type   = TUNER_XC2028,
907
		.tuner_gpio   = default_tuner_gpio,
908
		.decoder      = EM28XX_TVP5150,
909
		.input        = { {
910 911
			.type     = EM28XX_VMUX_TELEVISION,
			.vmux     = TVP5150_COMPOSITE0,
912
			.amux     = EM28XX_AMUX_VIDEO,
913 914 915
		}, {
			.type     = EM28XX_VMUX_COMPOSITE1,
			.vmux     = TVP5150_COMPOSITE1,
916
			.amux     = EM28XX_AMUX_LINE_IN,
917 918 919
		}, {
			.type     = EM28XX_VMUX_SVIDEO,
			.vmux     = TVP5150_SVIDEO,
920
			.amux     = EM28XX_AMUX_LINE_IN,
921 922
		} },
	},
923 924
	[EM2861_BOARD_YAKUMO_MOVIE_MIXER] = {
		.name          = "Yakumo MovieMixer",
925
		.tuner_type    = TUNER_ABSENT,	/* Capture only device */
926 927
		.decoder       = EM28XX_TVP5150,
		.input         = { {
928 929
			.type     = EM28XX_VMUX_TELEVISION,
			.vmux     = TVP5150_COMPOSITE0,
930
			.amux     = EM28XX_AMUX_VIDEO,
931
		}, {
932 933
			.type     = EM28XX_VMUX_COMPOSITE1,
			.vmux     = TVP5150_COMPOSITE1,
934
			.amux     = EM28XX_AMUX_LINE_IN,
935
		}, {
936 937
			.type     = EM28XX_VMUX_SVIDEO,
			.vmux     = TVP5150_SVIDEO,
938
			.amux     = EM28XX_AMUX_LINE_IN,
939
		} },
940
	},
941 942 943 944 945 946 947 948 949 950 951 952 953 954
	[EM2860_BOARD_TVP5150_REFERENCE_DESIGN] = {
		.name          = "EM2860/TVP5150 Reference Design",
		.tuner_type    = TUNER_ABSENT,	/* Capture only device */
		.decoder       = EM28XX_TVP5150,
		.input         = { {
			.type     = EM28XX_VMUX_COMPOSITE1,
			.vmux     = TVP5150_COMPOSITE1,
			.amux     = EM28XX_AMUX_LINE_IN,
		}, {
			.type     = EM28XX_VMUX_SVIDEO,
			.vmux     = TVP5150_SVIDEO,
			.amux     = EM28XX_AMUX_LINE_IN,
		} },
	},
955 956 957
	[EM2861_BOARD_PLEXTOR_PX_TV100U] = {
		.name         = "Plextor ConvertX PX-TV100U",
		.tuner_type   = TUNER_TNF_5335MF,
958 959
		.xclk         = EM28XX_XCLK_I2S_MSB_TIMING |
				EM28XX_XCLK_FREQUENCY_12MHZ,
960 961
		.tda9887_conf = TDA9887_PRESENT,
		.decoder      = EM28XX_TVP5150,
962
		.has_msp34xx  = 1,
963
		.input        = { {
964 965
			.type     = EM28XX_VMUX_TELEVISION,
			.vmux     = TVP5150_COMPOSITE0,
966
			.amux     = EM28XX_AMUX_LINE_IN,
967
			.gpio     = pinnacle_hybrid_pro_analog,
968 969 970
		}, {
			.type     = EM28XX_VMUX_COMPOSITE1,
			.vmux     = TVP5150_COMPOSITE1,
971
			.amux     = EM28XX_AMUX_LINE_IN,
972
			.gpio     = pinnacle_hybrid_pro_analog,
973 974 975
		}, {
			.type     = EM28XX_VMUX_SVIDEO,
			.vmux     = TVP5150_SVIDEO,
976
			.amux     = EM28XX_AMUX_LINE_IN,
977
			.gpio     = pinnacle_hybrid_pro_analog,
978 979
		} },
	},
980 981 982

	/* Those boards with em2870 are DVB Only*/

983 984 985 986
	[EM2870_BOARD_TERRATEC_XS] = {
		.name         = "Terratec Cinergy T XS",
		.valid        = EM28XX_BOARD_NOT_VALIDATED,
		.tuner_type   = TUNER_XC2028,
987
		.tuner_gpio   = default_tuner_gpio,
988 989 990 991 992 993 994 995 996 997
	},
	[EM2870_BOARD_TERRATEC_XS_MT2060] = {
		.name         = "Terratec Cinergy T XS (MT2060)",
		.valid        = EM28XX_BOARD_NOT_VALIDATED,
		.tuner_type   = TUNER_ABSENT, /* MT2060 */
	},
	[EM2870_BOARD_KWORLD_350U] = {
		.name         = "Kworld 350 U DVB-T",
		.valid        = EM28XX_BOARD_NOT_VALIDATED,
		.tuner_type   = TUNER_XC2028,
998
		.tuner_gpio   = default_tuner_gpio,
999 1000 1001 1002
	},
	[EM2870_BOARD_KWORLD_355U] = {
		.name         = "Kworld 355 U DVB-T",
		.valid        = EM28XX_BOARD_NOT_VALIDATED,
A
Aivar Päkk 已提交
1003 1004 1005 1006
		.tuner_type   = TUNER_ABSENT,
		.tuner_gpio   = default_tuner_gpio,
		.has_dvb      = 1,
		.dvb_gpio     = default_digital,
1007 1008 1009 1010 1011
	},
	[EM2870_BOARD_PINNACLE_PCTV_DVB] = {
		.name         = "Pinnacle PCTV DVB-T",
		.valid        = EM28XX_BOARD_NOT_VALIDATED,
		.tuner_type   = TUNER_ABSENT, /* MT2060 */
1012 1013 1014
		/* djh - I have serious doubts this is right... */
		.xclk         = EM28XX_XCLK_IR_RC5_MODE |
				EM28XX_XCLK_FREQUENCY_10MHZ,
1015 1016 1017 1018 1019 1020
	},
	[EM2870_BOARD_COMPRO_VIDEOMATE] = {
		.name         = "Compro, VideoMate U3",
		.valid        = EM28XX_BOARD_NOT_VALIDATED,
		.tuner_type   = TUNER_ABSENT, /* MT2060 */
	},
1021

1022 1023 1024 1025
	[EM2880_BOARD_TERRATEC_HYBRID_XS_FR] = {
		.name         = "Terratec Hybrid XS Secam",
		.has_msp34xx  = 1,
		.tuner_type   = TUNER_XC2028,
1026
		.tuner_gpio   = default_tuner_gpio,
1027
		.decoder      = EM28XX_TVP5150,
1028
		.has_dvb      = 1,
1029
		.dvb_gpio     = terratec_cinergy_USB_XS_FR_digital,
1030
		.input        = { {
1031 1032
			.type     = EM28XX_VMUX_TELEVISION,
			.vmux     = TVP5150_COMPOSITE0,
1033
			.amux     = EM28XX_AMUX_VIDEO,
1034
			.gpio     = terratec_cinergy_USB_XS_FR_analog,
1035 1036 1037
		}, {
			.type     = EM28XX_VMUX_COMPOSITE1,
			.vmux     = TVP5150_COMPOSITE1,
1038
			.amux     = EM28XX_AMUX_LINE_IN,
1039
			.gpio     = terratec_cinergy_USB_XS_FR_analog,
1040 1041 1042
		}, {
			.type     = EM28XX_VMUX_SVIDEO,
			.vmux     = TVP5150_SVIDEO,
1043
			.amux     = EM28XX_AMUX_LINE_IN,
1044
			.gpio     = terratec_cinergy_USB_XS_FR_analog,
1045 1046
		} },
	},
1047 1048 1049 1050 1051 1052 1053 1054
	[EM2884_BOARD_TERRATEC_H5] = {
		.name         = "Terratec Cinergy H5",
		.has_dvb      = 1,
#if 0
		.tuner_type   = TUNER_PHILIPS_TDA8290,
		.tuner_addr   = 0x41,
		.dvb_gpio     = terratec_h5_digital, /* FIXME: probably wrong */
		.tuner_gpio   = terratec_h5_gpio,
1055 1056
#else
		.tuner_type   = TUNER_ABSENT,
1057
#endif
1058 1059
		.def_i2c_bus  = 1,
		.i2c_speed    = EM28XX_I2C_CLK_WAIT_ENABLE |
1060 1061
				EM28XX_I2C_FREQ_400_KHZ,
	},
1062 1063 1064
	[EM2884_BOARD_HAUPPAUGE_WINTV_HVR_930C] = {
		.name         = "Hauppauge WinTV HVR 930C",
		.has_dvb      = 1,
1065 1066 1067 1068
#if 0 /* FIXME: Add analog support */
		.tuner_type   = TUNER_XC5000,
		.tuner_addr   = 0x41,
		.dvb_gpio     = hauppauge_930c_digital,
1069
		.tuner_gpio   = hauppauge_930c_gpio,
1070 1071 1072
#else
		.tuner_type   = TUNER_ABSENT,
#endif
1073
		.ir_codes     = RC_MAP_HAUPPAUGE,
1074 1075
		.def_i2c_bus  = 1,
		.i2c_speed    = EM28XX_I2C_CLK_WAIT_ENABLE |
1076 1077
				EM28XX_I2C_FREQ_400_KHZ,
	},
1078 1079 1080 1081 1082 1083 1084 1085 1086 1087
	[EM2884_BOARD_C3TECH_DIGITAL_DUO] = {
		.name         = "C3 Tech Digital Duo HDTV/SDTV USB",
		.has_dvb      = 1,
		/* FIXME: Add analog support - need a saa7136 driver */
		.tuner_type = TUNER_ABSENT,	/* Digital-only TDA18271HD */
		.ir_codes     = RC_MAP_EMPTY,
		.def_i2c_bus  = 1,
		.i2c_speed    = EM28XX_I2C_CLK_WAIT_ENABLE,
		.dvb_gpio     = c3tech_digital_duo_digital,
	},
1088 1089 1090
	[EM2884_BOARD_CINERGY_HTC_STICK] = {
		.name         = "Terratec Cinergy HTC Stick",
		.has_dvb      = 1,
1091
		.ir_codes     = RC_MAP_NEC_TERRATEC_CINERGY_XS,
1092
		.tuner_type   = TUNER_ABSENT,
1093 1094
		.def_i2c_bus  = 1,
		.i2c_speed    = EM28XX_I2C_CLK_WAIT_ENABLE |
1095 1096
				EM28XX_I2C_FREQ_400_KHZ,
	},
1097 1098 1099 1100
	[EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900] = {
		.name         = "Hauppauge WinTV HVR 900",
		.tda9887_conf = TDA9887_PRESENT,
		.tuner_type   = TUNER_XC2028,
1101
		.tuner_gpio   = default_tuner_gpio,
1102
		.mts_firmware = 1,
1103
		.has_dvb      = 1,
1104
		.dvb_gpio     = hauppauge_wintv_hvr_900_digital,
1105
		.ir_codes     = RC_MAP_HAUPPAUGE,
1106
		.decoder      = EM28XX_TVP5150,
1107
		.input        = { {
1108 1109
			.type     = EM28XX_VMUX_TELEVISION,
			.vmux     = TVP5150_COMPOSITE0,
1110
			.amux     = EM28XX_AMUX_VIDEO,
1111
			.gpio     = hauppauge_wintv_hvr_900_analog,
1112 1113 1114
		}, {
			.type     = EM28XX_VMUX_COMPOSITE1,
			.vmux     = TVP5150_COMPOSITE1,
1115
			.amux     = EM28XX_AMUX_LINE_IN,
1116
			.gpio     = hauppauge_wintv_hvr_900_analog,
1117 1118 1119
		}, {
			.type     = EM28XX_VMUX_SVIDEO,
			.vmux     = TVP5150_SVIDEO,
1120
			.amux     = EM28XX_AMUX_LINE_IN,
1121
			.gpio     = hauppauge_wintv_hvr_900_analog,
1122 1123 1124 1125 1126 1127
		} },
	},
	[EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2] = {
		.name         = "Hauppauge WinTV HVR 900 (R2)",
		.tda9887_conf = TDA9887_PRESENT,
		.tuner_type   = TUNER_XC2028,
1128
		.tuner_gpio   = default_tuner_gpio,
1129
		.mts_firmware = 1,
1130
		.has_dvb      = 1,
1131
		.dvb_gpio     = hauppauge_wintv_hvr_900R2_digital,
1132
		.ir_codes     = RC_MAP_HAUPPAUGE,
1133
		.decoder      = EM28XX_TVP5150,
1134
		.input        = { {
1135 1136
			.type     = EM28XX_VMUX_TELEVISION,
			.vmux     = TVP5150_COMPOSITE0,
1137
			.amux     = EM28XX_AMUX_VIDEO,
1138
			.gpio     = hauppauge_wintv_hvr_900_analog,
1139 1140 1141
		}, {
			.type     = EM28XX_VMUX_COMPOSITE1,
			.vmux     = TVP5150_COMPOSITE1,
1142
			.amux     = EM28XX_AMUX_LINE_IN,
1143
			.gpio     = hauppauge_wintv_hvr_900_analog,
1144 1145 1146
		}, {
			.type     = EM28XX_VMUX_SVIDEO,
			.vmux     = TVP5150_SVIDEO,
1147
			.amux     = EM28XX_AMUX_LINE_IN,
1148
			.gpio     = hauppauge_wintv_hvr_900_analog,
1149 1150
		} },
	},
1151 1152 1153 1154 1155 1156 1157
	[EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850] = {
		.name           = "Hauppauge WinTV HVR 850",
		.tuner_type     = TUNER_XC2028,
		.tuner_gpio     = default_tuner_gpio,
		.mts_firmware   = 1,
		.has_dvb        = 1,
		.dvb_gpio       = hauppauge_wintv_hvr_900_digital,
1158
		.ir_codes       = RC_MAP_HAUPPAUGE,
1159 1160 1161 1162 1163 1164 1165 1166 1167 1168 1169 1170 1171 1172 1173 1174 1175 1176
		.decoder        = EM28XX_TVP5150,
		.input          = { {
			.type     = EM28XX_VMUX_TELEVISION,
			.vmux     = TVP5150_COMPOSITE0,
			.amux     = EM28XX_AMUX_VIDEO,
			.gpio     = hauppauge_wintv_hvr_900_analog,
		}, {
			.type     = EM28XX_VMUX_COMPOSITE1,
			.vmux     = TVP5150_COMPOSITE1,
			.amux     = EM28XX_AMUX_LINE_IN,
			.gpio     = hauppauge_wintv_hvr_900_analog,
		}, {
			.type     = EM28XX_VMUX_SVIDEO,
			.vmux     = TVP5150_SVIDEO,
			.amux     = EM28XX_AMUX_LINE_IN,
			.gpio     = hauppauge_wintv_hvr_900_analog,
		} },
	},
1177
	[EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950] = {
1178 1179
		.name           = "Hauppauge WinTV HVR 950",
		.tuner_type     = TUNER_XC2028,
1180
		.tuner_gpio     = default_tuner_gpio,
1181 1182
		.mts_firmware   = 1,
		.has_dvb        = 1,
1183
		.dvb_gpio       = hauppauge_wintv_hvr_900_digital,
1184
		.ir_codes       = RC_MAP_HAUPPAUGE,
1185 1186 1187 1188
		.decoder        = EM28XX_TVP5150,
		.input          = { {
			.type     = EM28XX_VMUX_TELEVISION,
			.vmux     = TVP5150_COMPOSITE0,
1189
			.amux     = EM28XX_AMUX_VIDEO,
1190
			.gpio     = hauppauge_wintv_hvr_900_analog,
1191 1192 1193
		}, {
			.type     = EM28XX_VMUX_COMPOSITE1,
			.vmux     = TVP5150_COMPOSITE1,
1194
			.amux     = EM28XX_AMUX_LINE_IN,
1195
			.gpio     = hauppauge_wintv_hvr_900_analog,
1196 1197 1198
		}, {
			.type     = EM28XX_VMUX_SVIDEO,
			.vmux     = TVP5150_SVIDEO,
1199
			.amux     = EM28XX_AMUX_LINE_IN,
1200
			.gpio     = hauppauge_wintv_hvr_900_analog,
1201 1202 1203 1204 1205
		} },
	},
	[EM2880_BOARD_PINNACLE_PCTV_HD_PRO] = {
		.name           = "Pinnacle PCTV HD Pro Stick",
		.tuner_type     = TUNER_XC2028,
1206
		.tuner_gpio   = default_tuner_gpio,
1207 1208
		.mts_firmware   = 1,
		.has_dvb        = 1,
1209
		.dvb_gpio       = hauppauge_wintv_hvr_900_digital,
1210
		.ir_codes       = RC_MAP_PINNACLE_PCTV_HD,
1211 1212 1213 1214
		.decoder        = EM28XX_TVP5150,
		.input          = { {
			.type     = EM28XX_VMUX_TELEVISION,
			.vmux     = TVP5150_COMPOSITE0,
1215
			.amux     = EM28XX_AMUX_VIDEO,
1216
			.gpio     = hauppauge_wintv_hvr_900_analog,
1217 1218 1219
		}, {
			.type     = EM28XX_VMUX_COMPOSITE1,
			.vmux     = TVP5150_COMPOSITE1,
1220
			.amux     = EM28XX_AMUX_LINE_IN,
1221
			.gpio     = hauppauge_wintv_hvr_900_analog,
1222 1223 1224
		}, {
			.type     = EM28XX_VMUX_SVIDEO,
			.vmux     = TVP5150_SVIDEO,
1225
			.amux     = EM28XX_AMUX_LINE_IN,
1226
			.gpio     = hauppauge_wintv_hvr_900_analog,
1227 1228 1229 1230 1231
		} },
	},
	[EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600] = {
		.name           = "AMD ATI TV Wonder HD 600",
		.tuner_type     = TUNER_XC2028,
1232
		.tuner_gpio     = default_tuner_gpio,
1233 1234
		.mts_firmware   = 1,
		.has_dvb        = 1,
1235
		.dvb_gpio       = hauppauge_wintv_hvr_900_digital,
1236
		.ir_codes       = RC_MAP_ATI_TV_WONDER_HD_600,
1237 1238 1239 1240
		.decoder        = EM28XX_TVP5150,
		.input          = { {
			.type     = EM28XX_VMUX_TELEVISION,
			.vmux     = TVP5150_COMPOSITE0,
1241
			.amux     = EM28XX_AMUX_VIDEO,
1242
			.gpio     = hauppauge_wintv_hvr_900_analog,
1243 1244 1245
		}, {
			.type     = EM28XX_VMUX_COMPOSITE1,
			.vmux     = TVP5150_COMPOSITE1,
1246
			.amux     = EM28XX_AMUX_LINE_IN,
1247
			.gpio     = hauppauge_wintv_hvr_900_analog,
1248 1249 1250
		}, {
			.type     = EM28XX_VMUX_SVIDEO,
			.vmux     = TVP5150_SVIDEO,
1251
			.amux     = EM28XX_AMUX_LINE_IN,
1252
			.gpio     = hauppauge_wintv_hvr_900_analog,
1253 1254 1255
		} },
	},
	[EM2880_BOARD_TERRATEC_HYBRID_XS] = {
1256 1257
		.name           = "Terratec Hybrid XS",
		.tuner_type     = TUNER_XC2028,
1258
		.tuner_gpio     = default_tuner_gpio,
1259
		.decoder        = EM28XX_TVP5150,
1260
		.has_dvb        = 1,
1261
		.dvb_gpio       = default_digital,
1262
		.ir_codes       = RC_MAP_TERRATEC_CINERGY_XS,
1263
		.xclk           = EM28XX_XCLK_FREQUENCY_12MHZ, /* NEC IR */
1264 1265 1266
		.input          = { {
			.type     = EM28XX_VMUX_TELEVISION,
			.vmux     = TVP5150_COMPOSITE0,
1267
			.amux     = EM28XX_AMUX_VIDEO,
1268
			.gpio     = default_analog,
1269 1270 1271
		}, {
			.type     = EM28XX_VMUX_COMPOSITE1,
			.vmux     = TVP5150_COMPOSITE1,
1272
			.amux     = EM28XX_AMUX_LINE_IN,
1273
			.gpio     = default_analog,
1274 1275 1276
		}, {
			.type     = EM28XX_VMUX_SVIDEO,
			.vmux     = TVP5150_SVIDEO,
1277
			.amux     = EM28XX_AMUX_LINE_IN,
1278
			.gpio     = default_analog,
1279 1280 1281 1282 1283 1284 1285 1286
		} },
	},
	/* maybe there's a reason behind it why Terratec sells the Hybrid XS
	   as Prodigy XS with a different PID, let's keep it separated for now
	   maybe we'll need it lateron */
	[EM2880_BOARD_TERRATEC_PRODIGY_XS] = {
		.name         = "Terratec Prodigy XS",
		.tuner_type   = TUNER_XC2028,
1287
		.tuner_gpio   = default_tuner_gpio,
1288
		.decoder      = EM28XX_TVP5150,
1289
		.input        = { {
1290 1291
			.type     = EM28XX_VMUX_TELEVISION,
			.vmux     = TVP5150_COMPOSITE0,
1292
			.amux     = EM28XX_AMUX_VIDEO,
1293
			.gpio     = hauppauge_wintv_hvr_900_analog,
1294 1295 1296
		}, {
			.type     = EM28XX_VMUX_COMPOSITE1,
			.vmux     = TVP5150_COMPOSITE1,
1297
			.amux     = EM28XX_AMUX_LINE_IN,
1298
			.gpio     = hauppauge_wintv_hvr_900_analog,
1299 1300 1301
		}, {
			.type     = EM28XX_VMUX_SVIDEO,
			.vmux     = TVP5150_SVIDEO,
1302
			.amux     = EM28XX_AMUX_LINE_IN,
1303
			.gpio     = hauppauge_wintv_hvr_900_analog,
1304 1305 1306 1307 1308 1309 1310 1311 1312
		} },
	},
	[EM2820_BOARD_MSI_VOX_USB_2] = {
		.name		   = "MSI VOX USB 2.0",
		.tuner_type	   = TUNER_LG_PAL_NEW_TAPC,
		.tda9887_conf	   = TDA9887_PRESENT      |
				     TDA9887_PORT1_ACTIVE |
				     TDA9887_PORT2_ACTIVE,
		.max_range_640_480 = 1,
1313
		.decoder           = EM28XX_SAA711X,
1314 1315 1316
		.input             = { {
			.type      = EM28XX_VMUX_TELEVISION,
			.vmux      = SAA7115_COMPOSITE4,
1317
			.amux      = EM28XX_AMUX_VIDEO,
1318 1319 1320
		}, {
			.type      = EM28XX_VMUX_COMPOSITE1,
			.vmux      = SAA7115_COMPOSITE0,
1321
			.amux      = EM28XX_AMUX_LINE_IN,
1322 1323 1324
		}, {
			.type      = EM28XX_VMUX_SVIDEO,
			.vmux      = SAA7115_SVIDEO3,
1325
			.amux      = EM28XX_AMUX_LINE_IN,
1326 1327 1328 1329 1330
		} },
	},
	[EM2800_BOARD_TERRATEC_CINERGY_200] = {
		.name         = "Terratec Cinergy 200 USB",
		.is_em2800    = 1,
1331
		.has_ir_i2c   = 1,
1332
		.tuner_type   = TUNER_LG_TALN,
1333
		.tda9887_conf = TDA9887_PRESENT,
1334
		.decoder      = EM28XX_SAA711X,
1335
		.input        = { {
1336 1337
			.type     = EM28XX_VMUX_TELEVISION,
			.vmux     = SAA7115_COMPOSITE2,
1338
			.amux     = EM28XX_AMUX_VIDEO,
1339 1340 1341
		}, {
			.type     = EM28XX_VMUX_COMPOSITE1,
			.vmux     = SAA7115_COMPOSITE0,
1342
			.amux     = EM28XX_AMUX_LINE_IN,
1343 1344 1345
		}, {
			.type     = EM28XX_VMUX_SVIDEO,
			.vmux     = SAA7115_SVIDEO3,
1346
			.amux     = EM28XX_AMUX_LINE_IN,
1347 1348 1349
		} },
	},
	[EM2800_BOARD_GRABBEEX_USB2800] = {
1350 1351 1352 1353 1354
		.name       = "eMPIA Technology, Inc. GrabBeeX+ Video Encoder",
		.is_em2800  = 1,
		.decoder    = EM28XX_SAA711X,
		.tuner_type = TUNER_ABSENT, /* capture only board */
		.input      = { {
1355 1356
			.type     = EM28XX_VMUX_COMPOSITE1,
			.vmux     = SAA7115_COMPOSITE0,
1357
			.amux     = EM28XX_AMUX_LINE_IN,
1358 1359 1360
		}, {
			.type     = EM28XX_VMUX_SVIDEO,
			.vmux     = SAA7115_SVIDEO3,
1361
			.amux     = EM28XX_AMUX_LINE_IN,
1362 1363
		} },
	},
1364 1365 1366 1367 1368 1369 1370 1371 1372 1373 1374 1375 1376 1377 1378 1379 1380
	[EM2800_BOARD_VC211A] = {
		.name         = "Actionmaster/LinXcel/Digitus VC211A",
		.is_em2800    = 1,
		.tuner_type   = TUNER_ABSENT,	/* Capture-only board */
		.decoder      = EM28XX_SAA711X,
		.input        = { {
			.type     = EM28XX_VMUX_COMPOSITE1,
			.vmux     = SAA7115_COMPOSITE0,
			.amux     = EM28XX_AMUX_LINE_IN,
			.gpio     = vc211a_enable,
		}, {
			.type     = EM28XX_VMUX_SVIDEO,
			.vmux     = SAA7115_SVIDEO3,
			.amux     = EM28XX_AMUX_LINE_IN,
			.gpio     = vc211a_enable,
		} },
	},
1381 1382 1383 1384 1385
	[EM2800_BOARD_LEADTEK_WINFAST_USBII] = {
		.name         = "Leadtek Winfast USB II",
		.is_em2800    = 1,
		.tuner_type   = TUNER_LG_PAL_NEW_TAPC,
		.tda9887_conf = TDA9887_PRESENT,
1386
		.decoder      = EM28XX_SAA711X,
1387
		.input        = { {
1388 1389
			.type     = EM28XX_VMUX_TELEVISION,
			.vmux     = SAA7115_COMPOSITE2,
1390
			.amux     = EM28XX_AMUX_VIDEO,
1391 1392 1393
		}, {
			.type     = EM28XX_VMUX_COMPOSITE1,
			.vmux     = SAA7115_COMPOSITE0,
1394
			.amux     = EM28XX_AMUX_LINE_IN,
1395 1396 1397
		}, {
			.type     = EM28XX_VMUX_SVIDEO,
			.vmux     = SAA7115_SVIDEO3,
1398
			.amux     = EM28XX_AMUX_LINE_IN,
1399 1400 1401 1402 1403 1404 1405
		} },
	},
	[EM2800_BOARD_KWORLD_USB2800] = {
		.name         = "Kworld USB2800",
		.is_em2800    = 1,
		.tuner_type   = TUNER_PHILIPS_FCV1236D,
		.tda9887_conf = TDA9887_PRESENT,
1406
		.decoder      = EM28XX_SAA711X,
1407
		.input        = { {
1408 1409
			.type     = EM28XX_VMUX_TELEVISION,
			.vmux     = SAA7115_COMPOSITE2,
1410
			.amux     = EM28XX_AMUX_VIDEO,
1411 1412 1413
		}, {
			.type     = EM28XX_VMUX_COMPOSITE1,
			.vmux     = SAA7115_COMPOSITE0,
1414
			.amux     = EM28XX_AMUX_LINE_IN,
1415 1416 1417
		}, {
			.type     = EM28XX_VMUX_SVIDEO,
			.vmux     = SAA7115_SVIDEO3,
1418
			.amux     = EM28XX_AMUX_LINE_IN,
1419 1420 1421
		} },
	},
	[EM2820_BOARD_PINNACLE_DVC_90] = {
1422
		.name         = "Pinnacle Dazzle DVC 90/100/101/107 / Kaiser Baas Video to DVD maker "
1423
			       "/ Kworld DVD Maker 2 / Plextor ConvertX PX-AV100U",
1424
		.tuner_type   = TUNER_ABSENT, /* capture only board */
1425
		.decoder      = EM28XX_SAA711X,
1426
		.input        = { {
1427 1428
			.type     = EM28XX_VMUX_COMPOSITE1,
			.vmux     = SAA7115_COMPOSITE0,
1429
			.amux     = EM28XX_AMUX_LINE_IN,
1430 1431 1432
		}, {
			.type     = EM28XX_VMUX_SVIDEO,
			.vmux     = SAA7115_SVIDEO3,
1433
			.amux     = EM28XX_AMUX_LINE_IN,
1434 1435 1436 1437 1438 1439 1440
		} },
	},
	[EM2800_BOARD_VGEAR_POCKETTV] = {
		.name         = "V-Gear PocketTV",
		.is_em2800    = 1,
		.tuner_type   = TUNER_LG_PAL_NEW_TAPC,
		.tda9887_conf = TDA9887_PRESENT,
1441
		.decoder      = EM28XX_SAA711X,
1442
		.input        = { {
1443 1444
			.type     = EM28XX_VMUX_TELEVISION,
			.vmux     = SAA7115_COMPOSITE2,
1445
			.amux     = EM28XX_AMUX_VIDEO,
1446 1447 1448
		}, {
			.type     = EM28XX_VMUX_COMPOSITE1,
			.vmux     = SAA7115_COMPOSITE0,
1449
			.amux     = EM28XX_AMUX_LINE_IN,
1450 1451 1452
		}, {
			.type     = EM28XX_VMUX_SVIDEO,
			.vmux     = SAA7115_SVIDEO3,
1453
			.amux     = EM28XX_AMUX_LINE_IN,
1454 1455
		} },
	},
1456 1457 1458 1459 1460 1461 1462 1463 1464 1465 1466 1467 1468 1469 1470 1471 1472 1473 1474 1475 1476
	[EM2820_BOARD_PROLINK_PLAYTV_BOX4_USB2] = {
		.name         = "Pixelview PlayTV Box 4 USB 2.0",
		.tda9887_conf = TDA9887_PRESENT,
		.tuner_type   = TUNER_YMEC_TVF_5533MF,
		.decoder      = EM28XX_SAA711X,
		.input        = { {
			.type     = EM28XX_VMUX_TELEVISION,
			.vmux     = SAA7115_COMPOSITE2,
			.amux     = EM28XX_AMUX_VIDEO,
			.aout     = EM28XX_AOUT_MONO | 	/* I2S */
				    EM28XX_AOUT_MASTER,	/* Line out pin */
		}, {
			.type     = EM28XX_VMUX_COMPOSITE1,
			.vmux     = SAA7115_COMPOSITE0,
			.amux     = EM28XX_AMUX_LINE_IN,
		}, {
			.type     = EM28XX_VMUX_SVIDEO,
			.vmux     = SAA7115_SVIDEO3,
			.amux     = EM28XX_AMUX_LINE_IN,
		} },
	},
1477
	[EM2820_BOARD_PROLINK_PLAYTV_USB2] = {
1478
		.name         = "SIIG AVTuner-PVR / Pixelview Prolink PlayTV USB 2.0",
1479
		.buttons = std_snapshot_button,
1480 1481
		.tda9887_conf = TDA9887_PRESENT,
		.tuner_type   = TUNER_YMEC_TVF_5533MF,
1482
		.decoder      = EM28XX_SAA711X,
1483
		.input        = { {
1484 1485
			.type     = EM28XX_VMUX_TELEVISION,
			.vmux     = SAA7115_COMPOSITE2,
1486 1487 1488
			.amux     = EM28XX_AMUX_VIDEO,
			.aout     = EM28XX_AOUT_MONO | 	/* I2S */
				    EM28XX_AOUT_MASTER,	/* Line out pin */
1489 1490 1491 1492 1493 1494 1495 1496 1497 1498
		}, {
			.type     = EM28XX_VMUX_COMPOSITE1,
			.vmux     = SAA7115_COMPOSITE0,
			.amux     = EM28XX_AMUX_LINE_IN,
		}, {
			.type     = EM28XX_VMUX_SVIDEO,
			.vmux     = SAA7115_SVIDEO3,
			.amux     = EM28XX_AMUX_LINE_IN,
		} },
	},
1499 1500
	[EM2860_BOARD_SAA711X_REFERENCE_DESIGN] = {
		.name                = "EM2860/SAA711X Reference Design",
1501
		.buttons = std_snapshot_button,
1502
		.tuner_type          = TUNER_ABSENT,
1503
		.decoder             = EM28XX_SAA711X,
1504
		.input               = { {
1505 1506
			.type     = EM28XX_VMUX_SVIDEO,
			.vmux     = SAA7115_SVIDEO3,
1507 1508 1509
		}, {
			.type     = EM28XX_VMUX_COMPOSITE1,
			.vmux     = SAA7115_COMPOSITE0,
1510 1511
		} },
	},
1512

1513
	[EM2874_BOARD_LEADERSHIP_ISDBT] = {
1514 1515
		.def_i2c_bus	= 1,
		.i2c_speed      = EM28XX_I2C_CLK_WAIT_ENABLE |
1516 1517 1518 1519 1520 1521 1522 1523 1524
				  EM28XX_I2C_FREQ_100_KHZ,
		.xclk		= EM28XX_XCLK_FREQUENCY_10MHZ,
		.name		= "EM2874 Leadership ISDBT",
		.tuner_type	= TUNER_ABSENT,
		.tuner_gpio     = leadership_reset,
		.dvb_gpio       = leadership_digital,
		.has_dvb	= 1,
	},

1525 1526 1527 1528
	[EM2880_BOARD_MSI_DIGIVOX_AD] = {
		.name         = "MSI DigiVox A/D",
		.valid        = EM28XX_BOARD_NOT_VALIDATED,
		.tuner_type   = TUNER_XC2028,
1529
		.tuner_gpio   = default_tuner_gpio,
1530
		.decoder      = EM28XX_TVP5150,
1531
		.input        = { {
1532 1533
			.type     = EM28XX_VMUX_TELEVISION,
			.vmux     = TVP5150_COMPOSITE0,
1534
			.amux     = EM28XX_AMUX_VIDEO,
1535
			.gpio     = em2880_msi_digivox_ad_analog,
1536 1537 1538
		}, {
			.type     = EM28XX_VMUX_COMPOSITE1,
			.vmux     = TVP5150_COMPOSITE1,
1539
			.amux     = EM28XX_AMUX_LINE_IN,
1540
			.gpio     = em2880_msi_digivox_ad_analog,
1541 1542 1543
		}, {
			.type     = EM28XX_VMUX_SVIDEO,
			.vmux     = TVP5150_SVIDEO,
1544
			.amux     = EM28XX_AMUX_LINE_IN,
1545
			.gpio     = em2880_msi_digivox_ad_analog,
1546 1547 1548 1549 1550 1551
		} },
	},
	[EM2880_BOARD_MSI_DIGIVOX_AD_II] = {
		.name         = "MSI DigiVox A/D II",
		.valid        = EM28XX_BOARD_NOT_VALIDATED,
		.tuner_type   = TUNER_XC2028,
1552
		.tuner_gpio   = default_tuner_gpio,
1553
		.decoder      = EM28XX_TVP5150,
1554
		.input        = { {
1555 1556
			.type     = EM28XX_VMUX_TELEVISION,
			.vmux     = TVP5150_COMPOSITE0,
1557
			.amux     = EM28XX_AMUX_VIDEO,
1558
			.gpio     = em2880_msi_digivox_ad_analog,
1559 1560 1561
		}, {
			.type     = EM28XX_VMUX_COMPOSITE1,
			.vmux     = TVP5150_COMPOSITE1,
1562
			.amux     = EM28XX_AMUX_LINE_IN,
1563
			.gpio     = em2880_msi_digivox_ad_analog,
1564 1565 1566
		}, {
			.type     = EM28XX_VMUX_SVIDEO,
			.vmux     = TVP5150_SVIDEO,
1567
			.amux     = EM28XX_AMUX_LINE_IN,
1568
			.gpio     = em2880_msi_digivox_ad_analog,
1569 1570
		} },
	},
1571 1572
	[EM2880_BOARD_KWORLD_DVB_305U] = {
		.name	      = "KWorld DVB-T 305U",
1573
		.tuner_type   = TUNER_XC2028,
1574
		.tuner_gpio   = default_tuner_gpio,
1575
		.decoder      = EM28XX_TVP5150,
1576
		.input        = { {
1577 1578
			.type     = EM28XX_VMUX_TELEVISION,
			.vmux     = TVP5150_COMPOSITE0,
1579
			.amux     = EM28XX_AMUX_VIDEO,
1580
		}, {
1581 1582
			.type     = EM28XX_VMUX_COMPOSITE1,
			.vmux     = TVP5150_COMPOSITE1,
1583
			.amux     = EM28XX_AMUX_LINE_IN,
1584
		}, {
1585 1586
			.type     = EM28XX_VMUX_SVIDEO,
			.vmux     = TVP5150_SVIDEO,
1587
			.amux     = EM28XX_AMUX_LINE_IN,
1588
		} },
1589
	},
1590 1591
	[EM2880_BOARD_KWORLD_DVB_310U] = {
		.name	      = "KWorld DVB-T 310U",
1592
		.tuner_type   = TUNER_XC2028,
1593
		.tuner_gpio   = default_tuner_gpio,
1594
		.has_dvb      = 1,
1595
		.dvb_gpio     = default_digital,
1596
		.mts_firmware = 1,
1597
		.decoder      = EM28XX_TVP5150,
1598
		.input        = { {
1599 1600
			.type     = EM28XX_VMUX_TELEVISION,
			.vmux     = TVP5150_COMPOSITE0,
1601
			.amux     = EM28XX_AMUX_VIDEO,
1602
			.gpio     = default_analog,
1603
		}, {
1604 1605
			.type     = EM28XX_VMUX_COMPOSITE1,
			.vmux     = TVP5150_COMPOSITE1,
1606
			.amux     = EM28XX_AMUX_LINE_IN,
1607
			.gpio     = default_analog,
1608
		}, {	/* S-video has not been tested yet */
1609 1610
			.type     = EM28XX_VMUX_SVIDEO,
			.vmux     = TVP5150_SVIDEO,
1611
			.amux     = EM28XX_AMUX_LINE_IN,
1612
			.gpio     = default_analog,
1613
		} },
1614
	},
1615 1616 1617 1618 1619 1620 1621 1622 1623
	[EM2882_BOARD_KWORLD_ATSC_315U] = {
		.name		= "KWorld ATSC 315U HDTV TV Box",
		.valid		= EM28XX_BOARD_NOT_VALIDATED,
		.tuner_type	= TUNER_THOMSON_DTT761X,
		.tuner_gpio	= em2882_kworld_315u_tuner_gpio,
		.tda9887_conf	= TDA9887_PRESENT,
		.decoder	= EM28XX_SAA711X,
		.has_dvb	= 1,
		.dvb_gpio	= em2882_kworld_315u_digital,
1624
		.ir_codes	= RC_MAP_KWORLD_315U,
1625 1626 1627 1628 1629 1630 1631 1632 1633 1634 1635 1636 1637 1638 1639 1640 1641 1642 1643 1644 1645 1646 1647
		.xclk		= EM28XX_XCLK_FREQUENCY_12MHZ,
		.i2c_speed	= EM28XX_I2C_CLK_WAIT_ENABLE,
		/* Analog mode - still not ready */
		/*.input        = { {
			.type = EM28XX_VMUX_TELEVISION,
			.vmux = SAA7115_COMPOSITE2,
			.amux = EM28XX_AMUX_VIDEO,
			.gpio = em2882_kworld_315u_analog,
			.aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO,
		}, {
			.type = EM28XX_VMUX_COMPOSITE1,
			.vmux = SAA7115_COMPOSITE0,
			.amux = EM28XX_AMUX_LINE_IN,
			.gpio = em2882_kworld_315u_analog1,
			.aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO,
		}, {
			.type = EM28XX_VMUX_SVIDEO,
			.vmux = SAA7115_SVIDEO3,
			.amux = EM28XX_AMUX_LINE_IN,
			.gpio = em2882_kworld_315u_analog1,
			.aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO,
		} }, */
	},
1648 1649 1650 1651 1652 1653 1654 1655 1656 1657 1658 1659 1660 1661 1662 1663 1664 1665 1666 1667 1668 1669 1670 1671 1672
	[EM2880_BOARD_EMPIRE_DUAL_TV] = {
		.name = "Empire dual TV",
		.tuner_type = TUNER_XC2028,
		.tuner_gpio = default_tuner_gpio,
		.has_dvb = 1,
		.dvb_gpio = default_digital,
		.mts_firmware = 1,
		.decoder = EM28XX_TVP5150,
		.input = { {
			.type = EM28XX_VMUX_TELEVISION,
			.vmux = TVP5150_COMPOSITE0,
			.amux = EM28XX_AMUX_VIDEO,
			.gpio = default_analog,
		}, {
			.type = EM28XX_VMUX_COMPOSITE1,
			.vmux = TVP5150_COMPOSITE1,
			.amux = EM28XX_AMUX_LINE_IN,
			.gpio = default_analog,
		}, {
			.type = EM28XX_VMUX_SVIDEO,
			.vmux = TVP5150_SVIDEO,
			.amux = EM28XX_AMUX_LINE_IN,
			.gpio = default_analog,
		} },
	},
1673 1674 1675 1676
	[EM2881_BOARD_DNT_DA2_HYBRID] = {
		.name         = "DNT DA2 Hybrid",
		.valid        = EM28XX_BOARD_NOT_VALIDATED,
		.tuner_type   = TUNER_XC2028,
1677
		.tuner_gpio   = default_tuner_gpio,
1678
		.decoder      = EM28XX_TVP5150,
1679
		.input        = { {
1680
			.type     = EM28XX_VMUX_TELEVISION,
1681
			.vmux     = TVP5150_COMPOSITE0,
1682
			.amux     = EM28XX_AMUX_VIDEO,
1683
			.gpio     = default_analog,
1684
		}, {
1685
			.type     = EM28XX_VMUX_COMPOSITE1,
1686
			.vmux     = TVP5150_COMPOSITE1,
1687
			.amux     = EM28XX_AMUX_LINE_IN,
1688
			.gpio     = default_analog,
1689
		}, {
1690
			.type     = EM28XX_VMUX_SVIDEO,
1691
			.vmux     = TVP5150_SVIDEO,
1692
			.amux     = EM28XX_AMUX_LINE_IN,
1693
			.gpio     = default_analog,
1694
		} },
1695
	},
1696 1697 1698
	[EM2881_BOARD_PINNACLE_HYBRID_PRO] = {
		.name         = "Pinnacle Hybrid Pro",
		.tuner_type   = TUNER_XC2028,
1699
		.tuner_gpio   = default_tuner_gpio,
1700
		.decoder      = EM28XX_TVP5150,
1701 1702
		.has_dvb      = 1,
		.dvb_gpio     = pinnacle_hybrid_pro_digital,
1703
		.input        = { {
1704 1705
			.type     = EM28XX_VMUX_TELEVISION,
			.vmux     = TVP5150_COMPOSITE0,
1706
			.amux     = EM28XX_AMUX_VIDEO,
1707
			.gpio     = pinnacle_hybrid_pro_analog,
1708
		}, {
1709
			.type     = EM28XX_VMUX_COMPOSITE1,
1710
			.vmux     = TVP5150_COMPOSITE1,
1711
			.amux     = EM28XX_AMUX_LINE_IN,
1712
			.gpio     = pinnacle_hybrid_pro_analog,
1713 1714
		}, {
			.type     = EM28XX_VMUX_SVIDEO,
1715
			.vmux     = TVP5150_SVIDEO,
1716
			.amux     = EM28XX_AMUX_LINE_IN,
1717
			.gpio     = pinnacle_hybrid_pro_analog,
1718 1719
		} },
	},
1720 1721
	[EM2882_BOARD_PINNACLE_HYBRID_PRO_330E] = {
		.name         = "Pinnacle Hybrid Pro (330e)",
1722
		.tuner_type   = TUNER_XC2028,
1723
		.tuner_gpio   = default_tuner_gpio,
1724
		.mts_firmware = 1,
1725 1726
		.has_dvb      = 1,
		.dvb_gpio     = hauppauge_wintv_hvr_900R2_digital,
1727
		.ir_codes     = RC_MAP_PINNACLE_PCTV_HD,
1728
		.decoder      = EM28XX_TVP5150,
1729
		.input        = { {
1730
			.type     = EM28XX_VMUX_TELEVISION,
1731
			.vmux     = TVP5150_COMPOSITE0,
1732
			.amux     = EM28XX_AMUX_VIDEO,
1733
			.gpio     = hauppauge_wintv_hvr_900_analog,
1734
		}, {
1735
			.type     = EM28XX_VMUX_COMPOSITE1,
1736
			.vmux     = TVP5150_COMPOSITE1,
1737
			.amux     = EM28XX_AMUX_LINE_IN,
1738
			.gpio     = hauppauge_wintv_hvr_900_analog,
1739
		}, {
1740
			.type     = EM28XX_VMUX_SVIDEO,
1741
			.vmux     = TVP5150_SVIDEO,
1742
			.amux     = EM28XX_AMUX_LINE_IN,
1743
			.gpio     = hauppauge_wintv_hvr_900_analog,
1744
		} },
1745
	},
1746 1747 1748
	[EM2882_BOARD_KWORLD_VS_DVBT] = {
		.name         = "Kworld VS-DVB-T 323UR",
		.tuner_type   = TUNER_XC2028,
1749
		.tuner_gpio   = default_tuner_gpio,
1750
		.decoder      = EM28XX_TVP5150,
1751 1752 1753 1754
		.mts_firmware = 1,
		.has_dvb      = 1,
		.dvb_gpio     = kworld_330u_digital,
		.xclk         = EM28XX_XCLK_FREQUENCY_12MHZ, /* NEC IR */
1755
		.ir_codes     = RC_MAP_KWORLD_315U,
1756
		.input        = { {
1757
			.type     = EM28XX_VMUX_TELEVISION,
1758
			.vmux     = TVP5150_COMPOSITE0,
1759
			.amux     = EM28XX_AMUX_VIDEO,
1760
		}, {
1761
			.type     = EM28XX_VMUX_COMPOSITE1,
1762
			.vmux     = TVP5150_COMPOSITE1,
1763
			.amux     = EM28XX_AMUX_LINE_IN,
1764
		}, {
1765
			.type     = EM28XX_VMUX_SVIDEO,
1766
			.vmux     = TVP5150_SVIDEO,
1767
			.amux     = EM28XX_AMUX_LINE_IN,
1768
		} },
1769
	},
1770
	[EM2882_BOARD_TERRATEC_HYBRID_XS] = {
1771
		.name         = "Terratec Cinnergy Hybrid T USB XS (em2882)",
1772
		.tuner_type   = TUNER_XC2028,
1773
		.tuner_gpio   = default_tuner_gpio,
1774
		.mts_firmware = 1,
1775
		.decoder      = EM28XX_TVP5150,
1776 1777
		.has_dvb      = 1,
		.dvb_gpio     = hauppauge_wintv_hvr_900_digital,
1778
		.ir_codes     = RC_MAP_TERRATEC_CINERGY_XS,
1779
		.xclk         = EM28XX_XCLK_FREQUENCY_12MHZ,
1780
		.input        = { {
1781 1782
			.type     = EM28XX_VMUX_TELEVISION,
			.vmux     = TVP5150_COMPOSITE0,
1783
			.amux     = EM28XX_AMUX_VIDEO,
1784
			.gpio     = hauppauge_wintv_hvr_900_analog,
1785
		}, {
1786
			.type     = EM28XX_VMUX_COMPOSITE1,
1787
			.vmux     = TVP5150_COMPOSITE1,
1788
			.amux     = EM28XX_AMUX_LINE_IN,
1789
			.gpio     = hauppauge_wintv_hvr_900_analog,
1790
		}, {
1791
			.type     = EM28XX_VMUX_SVIDEO,
1792
			.vmux     = TVP5150_SVIDEO,
1793
			.amux     = EM28XX_AMUX_LINE_IN,
1794
			.gpio     = hauppauge_wintv_hvr_900_analog,
1795
		} },
1796
	},
1797 1798 1799 1800 1801 1802 1803 1804 1805 1806 1807 1808 1809 1810 1811
	[EM2882_BOARD_DIKOM_DK300] = {
		.name         = "Dikom DK300",
		.tuner_type   = TUNER_XC2028,
		.tuner_gpio   = default_tuner_gpio,
		.decoder      = EM28XX_TVP5150,
		.mts_firmware = 1,
		.has_dvb      = 1,
		.dvb_gpio     = dikom_dk300_digital,
		.input        = { {
			.type     = EM28XX_VMUX_TELEVISION,
			.vmux     = TVP5150_COMPOSITE0,
			.amux     = EM28XX_AMUX_VIDEO,
			.gpio     = default_analog,
		} },
	},
1812
	[EM2883_BOARD_KWORLD_HYBRID_330U] = {
1813 1814
		.name         = "Kworld PlusTV HD Hybrid 330",
		.tuner_type   = TUNER_XC2028,
1815
		.tuner_gpio   = default_tuner_gpio,
1816
		.decoder      = EM28XX_TVP5150,
1817 1818
		.mts_firmware = 1,
		.has_dvb      = 1,
1819 1820
		.dvb_gpio     = kworld_330u_digital,
		.xclk             = EM28XX_XCLK_FREQUENCY_12MHZ,
1821 1822 1823
		.i2c_speed        = EM28XX_I2C_CLK_WAIT_ENABLE |
				    EM28XX_I2C_EEPROM_ON_BOARD |
				    EM28XX_I2C_EEPROM_KEY_VALID,
1824
		.input        = { {
1825
			.type     = EM28XX_VMUX_TELEVISION,
1826
			.vmux     = TVP5150_COMPOSITE0,
1827
			.amux     = EM28XX_AMUX_VIDEO,
1828 1829
			.gpio     = kworld_330u_analog,
			.aout     = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO,
1830
		}, {
1831
			.type     = EM28XX_VMUX_COMPOSITE1,
1832
			.vmux     = TVP5150_COMPOSITE1,
1833
			.amux     = EM28XX_AMUX_LINE_IN,
1834 1835
			.gpio     = kworld_330u_analog,
			.aout     = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO,
1836
		}, {
1837
			.type     = EM28XX_VMUX_SVIDEO,
1838
			.vmux     = TVP5150_SVIDEO,
1839
			.amux     = EM28XX_AMUX_LINE_IN,
1840
			.gpio     = kworld_330u_analog,
1841 1842
		} },
	},
1843
	[EM2820_BOARD_COMPRO_VIDEOMATE_FORYOU] = {
1844 1845
		.name         = "Compro VideoMate ForYou/Stereo",
		.tuner_type   = TUNER_LG_PAL_NEW_TAPC,
1846
		.tvaudio_addr = 0xb0,
1847 1848
		.tda9887_conf = TDA9887_PRESENT,
		.decoder      = EM28XX_TVP5150,
1849
		.adecoder     = EM28XX_TVAUDIO,
1850
		.mute_gpio    = compro_mute_gpio,
1851
		.input        = { {
1852 1853
			.type     = EM28XX_VMUX_TELEVISION,
			.vmux     = TVP5150_COMPOSITE0,
1854 1855
			.amux     = EM28XX_AMUX_VIDEO,
			.gpio     = compro_unmute_tv_gpio,
1856 1857 1858 1859
		}, {
			.type     = EM28XX_VMUX_SVIDEO,
			.vmux     = TVP5150_SVIDEO,
			.amux     = EM28XX_AMUX_LINE_IN,
1860
			.gpio     = compro_unmute_svid_gpio,
1861 1862
		} },
	},
1863 1864 1865 1866 1867 1868 1869 1870
	[EM2860_BOARD_KAIOMY_TVNPC_U2] = {
		.name	      = "Kaiomy TVnPC U2",
		.vchannels    = 3,
		.tuner_type   = TUNER_XC2028,
		.tuner_addr   = 0x61,
		.mts_firmware = 1,
		.decoder      = EM28XX_TVP5150,
		.tuner_gpio   = default_tuner_gpio,
1871
		.ir_codes     = RC_MAP_KAIOMY,
1872 1873 1874 1875 1876 1877 1878 1879 1880 1881 1882 1883 1884 1885 1886 1887 1888 1889
		.input          = { {
			.type     = EM28XX_VMUX_TELEVISION,
			.vmux     = TVP5150_COMPOSITE0,
			.amux     = EM28XX_AMUX_VIDEO,

		}, {
			.type     = EM28XX_VMUX_COMPOSITE1,
			.vmux     = TVP5150_COMPOSITE1,
			.amux     = EM28XX_AMUX_LINE_IN,
		}, {
			.type     = EM28XX_VMUX_SVIDEO,
			.vmux     = TVP5150_SVIDEO,
			.amux     = EM28XX_AMUX_LINE_IN,
		} },
		.radio		= {
			.type     = EM28XX_RADIO,
			.amux     = EM28XX_AMUX_LINE_IN,
		}
1890 1891 1892 1893 1894 1895 1896 1897 1898 1899 1900 1901 1902 1903 1904 1905
	},
	[EM2860_BOARD_EASYCAP] = {
		.name         = "Easy Cap Capture DC-60",
		.vchannels    = 2,
		.tuner_type   = TUNER_ABSENT,
		.decoder      = EM28XX_SAA711X,
		.input           = { {
			.type     = EM28XX_VMUX_COMPOSITE1,
			.vmux     = SAA7115_COMPOSITE0,
			.amux     = EM28XX_AMUX_LINE_IN,
		}, {
			.type     = EM28XX_VMUX_SVIDEO,
			.vmux     = SAA7115_SVIDEO3,
			.amux     = EM28XX_AMUX_LINE_IN,
		} },
	},
1906 1907 1908 1909 1910 1911 1912 1913 1914 1915 1916 1917 1918 1919 1920 1921 1922 1923 1924 1925
	[EM2820_BOARD_IODATA_GVMVP_SZ] = {
		.name       = "IO-DATA GV-MVP/SZ",
		.tuner_type   = TUNER_PHILIPS_FM1236_MK3,
		.tuner_gpio   = default_tuner_gpio,
		.tda9887_conf = TDA9887_PRESENT,
		.decoder      = EM28XX_TVP5150,
		.input        = { {
			.type     = EM28XX_VMUX_TELEVISION,
			.vmux     = TVP5150_COMPOSITE0,
			.amux     = EM28XX_AMUX_VIDEO,
		}, { /* Composite has not been tested yet */
			.type     = EM28XX_VMUX_COMPOSITE1,
			.vmux     = TVP5150_COMPOSITE1,
			.amux     = EM28XX_AMUX_VIDEO,
		}, { /* S-video has not been tested yet */
			.type     = EM28XX_VMUX_SVIDEO,
			.vmux     = TVP5150_SVIDEO,
			.amux     = EM28XX_AMUX_VIDEO,
		} },
	},
1926 1927 1928 1929 1930 1931 1932 1933 1934
	[EM2860_BOARD_TERRATEC_GRABBY] = {
		.name            = "Terratec Grabby",
		.vchannels       = 2,
		.tuner_type      = TUNER_ABSENT,
		.decoder         = EM28XX_SAA711X,
		.xclk            = EM28XX_XCLK_FREQUENCY_12MHZ,
		.input           = { {
			.type     = EM28XX_VMUX_COMPOSITE1,
			.vmux     = SAA7115_COMPOSITE0,
1935
			.amux     = EM28XX_AMUX_LINE_IN,
1936 1937 1938
		}, {
			.type     = EM28XX_VMUX_SVIDEO,
			.vmux     = SAA7115_SVIDEO3,
1939
			.amux     = EM28XX_AMUX_LINE_IN,
1940 1941
		} },
	},
1942 1943 1944 1945 1946 1947 1948 1949 1950 1951 1952
	[EM2860_BOARD_TERRATEC_AV350] = {
		.name            = "Terratec AV350",
		.vchannels       = 2,
		.tuner_type      = TUNER_ABSENT,
		.decoder         = EM28XX_TVP5150,
		.xclk            = EM28XX_XCLK_FREQUENCY_12MHZ,
		.mute_gpio       = terratec_av350_mute_gpio,
		.input           = { {
			.type     = EM28XX_VMUX_COMPOSITE1,
			.vmux     = TVP5150_COMPOSITE1,
			.amux     = EM28XX_AUDIO_SRC_LINE,
1953
			.gpio     = terratec_av350_unmute_gpio,
1954 1955 1956 1957 1958

		}, {
			.type     = EM28XX_VMUX_SVIDEO,
			.vmux     = TVP5150_SVIDEO,
			.amux     = EM28XX_AUDIO_SRC_LINE,
1959
			.gpio     = terratec_av350_unmute_gpio,
1960 1961
		} },
	},
1962 1963 1964 1965 1966 1967 1968 1969 1970 1971 1972 1973 1974 1975 1976 1977

	[EM2860_BOARD_ELGATO_VIDEO_CAPTURE] = {
		.name         = "Elgato Video Capture",
		.decoder      = EM28XX_SAA711X,
		.tuner_type   = TUNER_ABSENT,   /* Capture only device */
		.input        = { {
			.type  = EM28XX_VMUX_COMPOSITE1,
			.vmux  = SAA7115_COMPOSITE0,
			.amux  = EM28XX_AMUX_LINE_IN,
		}, {
			.type  = EM28XX_VMUX_SVIDEO,
			.vmux  = SAA7115_SVIDEO3,
			.amux  = EM28XX_AMUX_LINE_IN,
		} },
	},

1978 1979 1980 1981 1982
	[EM2882_BOARD_EVGA_INDTUBE] = {
		.name         = "Evga inDtube",
		.tuner_type   = TUNER_XC2028,
		.tuner_gpio   = default_tuner_gpio,
		.decoder      = EM28XX_TVP5150,
1983
		.xclk         = EM28XX_XCLK_FREQUENCY_12MHZ, /* NEC IR */
1984 1985 1986
		.mts_firmware = 1,
		.has_dvb      = 1,
		.dvb_gpio     = evga_indtube_digital,
1987
		.ir_codes     = RC_MAP_EVGA_INDTUBE,
1988 1989 1990 1991 1992 1993 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004
		.input        = { {
			.type     = EM28XX_VMUX_TELEVISION,
			.vmux     = TVP5150_COMPOSITE0,
			.amux     = EM28XX_AMUX_VIDEO,
			.gpio     = evga_indtube_analog,
		}, {
			.type     = EM28XX_VMUX_COMPOSITE1,
			.vmux     = TVP5150_COMPOSITE1,
			.amux     = EM28XX_AMUX_LINE_IN,
			.gpio     = evga_indtube_analog,
		}, {
			.type     = EM28XX_VMUX_SVIDEO,
			.vmux     = TVP5150_SVIDEO,
			.amux     = EM28XX_AMUX_LINE_IN,
			.gpio     = evga_indtube_analog,
		} },
	},
2005 2006 2007 2008 2009
	/* eb1a:2868 Empia EM2870 + Philips CU1216L NIM (Philips TDA10023 +
	   Infineon TUA6034) */
	[EM2870_BOARD_REDDO_DVB_C_USB_BOX] = {
		.name          = "Reddo DVB-C USB TV Box",
		.tuner_type    = TUNER_ABSENT,
2010
		.tuner_gpio    = reddo_dvb_c_usb_box,
2011 2012
		.has_dvb       = 1,
	},
2013 2014 2015 2016 2017 2018 2019 2020 2021 2022
	/* 1b80:a340 - Empia EM2870, NXP TDA18271HD and LG DT3304, sold
	 * initially as the KWorld PlusTV 340U, then as the UB435-Q.
	 * Early variants have a TDA18271HD/C1, later ones a TDA18271HD/C2 */
	[EM2870_BOARD_KWORLD_A340] = {
		.name       = "KWorld PlusTV 340U or UB435-Q (ATSC)",
		.tuner_type = TUNER_ABSENT,	/* Digital-only TDA18271HD */
		.has_dvb    = 1,
		.dvb_gpio   = kworld_a340_digital,
		.tuner_gpio = default_tuner_gpio,
	},
2023
	/* 2013:024f PCTV nanoStick T2 290e.
2024 2025
	 * Empia EM28174, Sony CXD2820R and NXP TDA18271HD/C2 */
	[EM28174_BOARD_PCTV_290E] = {
2026
		.name          = "PCTV nanoStick T2 290e",
2027 2028
		.def_i2c_bus   = 1,
		.i2c_speed     = EM28XX_I2C_CLK_WAIT_ENABLE | EM28XX_I2C_FREQ_100_KHZ,
2029 2030 2031
		.tuner_type    = TUNER_ABSENT,
		.tuner_gpio    = pctv_290e,
		.has_dvb       = 1,
2032
		.ir_codes      = RC_MAP_PINNACLE_PCTV_HD,
2033
	},
2034 2035 2036
	/* 2013:024f PCTV DVB-S2 Stick 460e
	 * Empia EM28174, NXP TDA10071, Conexant CX24118A and Allegro A8293 */
	[EM28174_BOARD_PCTV_460E] = {
2037 2038
		.def_i2c_bus   = 1,
		.i2c_speed     = EM28XX_I2C_CLK_WAIT_ENABLE | EM28XX_I2C_FREQ_400_KHZ,
2039 2040 2041 2042 2043 2044
		.name          = "PCTV DVB-S2 Stick (460e)",
		.tuner_type    = TUNER_ABSENT,
		.tuner_gpio    = pctv_460e,
		.has_dvb       = 1,
		.ir_codes      = RC_MAP_PINNACLE_PCTV_HD,
	},
2045 2046 2047 2048 2049 2050 2051 2052 2053 2054 2055 2056 2057 2058 2059 2060
	/* eb1a:5006 Honestech VIDBOX NW03
	 * Empia EM2860, Philips SAA7113, Empia EMP202, No Tuner */
	[EM2860_BOARD_HT_VIDBOX_NW03] = {
		.name                = "Honestech Vidbox NW03",
		.tuner_type          = TUNER_ABSENT,
		.decoder             = EM28XX_SAA711X,
		.input               = { {
			.type     = EM28XX_VMUX_COMPOSITE1,
			.vmux     = SAA7115_COMPOSITE0,
			.amux     = EM28XX_AMUX_LINE_IN,
		}, {
			.type     = EM28XX_VMUX_SVIDEO,
			.vmux     = SAA7115_SVIDEO3,  /* S-VIDEO needs confirming */
			.amux     = EM28XX_AMUX_LINE_IN,
		} },
	},
2061 2062 2063 2064 2065 2066 2067
	/* 1b80:e425 MaxMedia UB425-TC
	 * Empia EM2874B + Micronas DRX 3913KA2 + NXP TDA18271HDC2 */
	[EM2874_BOARD_MAXMEDIA_UB425_TC] = {
		.name          = "MaxMedia UB425-TC",
		.tuner_type    = TUNER_ABSENT,
		.tuner_gpio    = maxmedia_ub425_tc,
		.has_dvb       = 1,
2068
		.ir_codes      = RC_MAP_REDDO,
2069 2070
		.def_i2c_bus   = 1,
		.i2c_speed     = EM28XX_I2C_CLK_WAIT_ENABLE |
2071 2072
				EM28XX_I2C_FREQ_400_KHZ,
	},
2073 2074 2075 2076 2077 2078 2079 2080
	/* 2304:0242 PCTV QuatroStick (510e)
	 * Empia EM2884 + Micronas DRX 3926K + NXP TDA18271HDC2 */
	[EM2884_BOARD_PCTV_510E] = {
		.name          = "PCTV QuatroStick (510e)",
		.tuner_type    = TUNER_ABSENT,
		.tuner_gpio    = pctv_510e,
		.has_dvb       = 1,
		.ir_codes      = RC_MAP_PINNACLE_PCTV_HD,
2081 2082
		.def_i2c_bus   = 1,
		.i2c_speed     = EM28XX_I2C_CLK_WAIT_ENABLE |
2083 2084
				EM28XX_I2C_FREQ_400_KHZ,
	},
2085 2086 2087 2088 2089 2090 2091 2092
	/* 2013:0251 PCTV QuatroStick nano (520e)
	 * Empia EM2884 + Micronas DRX 3926K + NXP TDA18271HDC2 */
	[EM2884_BOARD_PCTV_520E] = {
		.name          = "PCTV QuatroStick nano (520e)",
		.tuner_type    = TUNER_ABSENT,
		.tuner_gpio    = pctv_520e,
		.has_dvb       = 1,
		.ir_codes      = RC_MAP_PINNACLE_PCTV_HD,
2093 2094
		.def_i2c_bus   = 1,
		.i2c_speed     = EM28XX_I2C_CLK_WAIT_ENABLE |
2095 2096
				EM28XX_I2C_FREQ_400_KHZ,
	},
2097 2098 2099 2100 2101
	[EM2884_BOARD_TERRATEC_HTC_USB_XS] = {
		.name         = "Terratec Cinergy HTC USB XS",
		.has_dvb      = 1,
		.ir_codes     = RC_MAP_NEC_TERRATEC_CINERGY_XS,
		.tuner_type   = TUNER_ABSENT,
2102 2103
		.def_i2c_bus  = 1,
		.i2c_speed    = EM28XX_I2C_CLK_WAIT_ENABLE |
2104 2105
				EM28XX_I2C_FREQ_400_KHZ,
	},
2106 2107
	/* 1b80:e1cc Delock 61959
	 * Empia EM2874B + Micronas DRX 3913KA2 + NXP TDA18271HDC2
2108
	 * mostly the same as MaxMedia UB-425-TC but different remote */
2109 2110 2111 2112 2113 2114 2115 2116 2117 2118
	[EM2874_BOARD_DELOCK_61959] = {
		.name          = "Delock 61959",
		.tuner_type    = TUNER_ABSENT,
		.tuner_gpio    = maxmedia_ub425_tc,
		.has_dvb       = 1,
		.ir_codes      = RC_MAP_DELOCK_61959,
		.def_i2c_bus   = 1,
		.i2c_speed     = EM28XX_I2C_CLK_WAIT_ENABLE |
				EM28XX_I2C_FREQ_400_KHZ,
	},
2119 2120 2121 2122 2123 2124 2125 2126 2127 2128 2129 2130
	/*
	 * 1b80:e346 KWorld USB ATSC TV Stick UB435-Q V2
	 * Empia EM2874B + LG DT3305 + NXP TDA18271HDC2
	 */
	[EM2874_BOARD_KWORLD_UB435Q_V2] = {
		.name		= "KWorld USB ATSC TV Stick UB435-Q V2",
		.tuner_type	= TUNER_ABSENT,
		.has_dvb	= 1,
		.dvb_gpio	= kworld_a340_digital,
		.tuner_gpio	= default_tuner_gpio,
		.def_i2c_bus	= 1,
	},
2131 2132 2133 2134 2135 2136 2137 2138 2139 2140 2141 2142 2143 2144 2145 2146 2147 2148
	/* 1ae7:9003/9004 SpeedLink Vicious And Devine Laplace webcam
	 * Empia EM2765 + OmniVision OV2640 */
	[EM2765_BOARD_SPEEDLINK_VAD_LAPLACE] = {
		.name         = "SpeedLink Vicious And Devine Laplace webcam",
		.xclk         = EM28XX_XCLK_FREQUENCY_24MHZ,
		.i2c_speed    = EM28XX_I2C_CLK_WAIT_ENABLE |
				EM28XX_I2C_FREQ_100_KHZ,
		.def_i2c_bus  = 1,
		.tuner_type   = TUNER_ABSENT,
		.is_webcam    = 1,
		.input        = { {
			.type     = EM28XX_VMUX_COMPOSITE1,
			.amux     = EM28XX_AMUX_VIDEO,
			.gpio     = speedlink_vad_laplace_reg_seq,
		} },
		.buttons = speedlink_vad_laplace_buttons,
		.leds = speedlink_vad_laplace_leds,
	},
2149 2150 2151 2152 2153 2154 2155 2156 2157 2158 2159
	/* 2013:0258 PCTV DVB-S2 Stick (461e)
	 * Empia EM28178, Montage M88DS3103, Montage M88TS2022, Allegro A8293 */
	[EM28178_BOARD_PCTV_461E] = {
		.def_i2c_bus   = 1,
		.i2c_speed     = EM28XX_I2C_CLK_WAIT_ENABLE | EM28XX_I2C_FREQ_400_KHZ,
		.name          = "PCTV DVB-S2 Stick (461e)",
		.tuner_type    = TUNER_ABSENT,
		.tuner_gpio    = pctv_461e,
		.has_dvb       = 1,
		.ir_codes      = RC_MAP_PINNACLE_PCTV_HD,
	},
2160
};
2161 2162
EXPORT_SYMBOL_GPL(em28xx_boards);

2163
const unsigned int em28xx_bcount = ARRAY_SIZE(em28xx_boards);
2164 2165

/* table of devices that work with this driver */
2166
struct usb_device_id em28xx_id_table[] = {
2167
	{ USB_DEVICE(0xeb1a, 0x2750),
2168 2169 2170
			.driver_info = EM2750_BOARD_UNKNOWN },
	{ USB_DEVICE(0xeb1a, 0x2751),
			.driver_info = EM2750_BOARD_UNKNOWN },
2171 2172
	{ USB_DEVICE(0xeb1a, 0x2800),
			.driver_info = EM2800_BOARD_UNKNOWN },
2173 2174
	{ USB_DEVICE(0xeb1a, 0x2710),
			.driver_info = EM2820_BOARD_UNKNOWN },
2175 2176 2177
	{ USB_DEVICE(0xeb1a, 0x2820),
			.driver_info = EM2820_BOARD_UNKNOWN },
	{ USB_DEVICE(0xeb1a, 0x2821),
2178
			.driver_info = EM2820_BOARD_UNKNOWN },
2179 2180 2181 2182
	{ USB_DEVICE(0xeb1a, 0x2860),
			.driver_info = EM2820_BOARD_UNKNOWN },
	{ USB_DEVICE(0xeb1a, 0x2861),
			.driver_info = EM2820_BOARD_UNKNOWN },
2183 2184
	{ USB_DEVICE(0xeb1a, 0x2862),
			.driver_info = EM2820_BOARD_UNKNOWN },
2185 2186
	{ USB_DEVICE(0xeb1a, 0x2863),
			.driver_info = EM2820_BOARD_UNKNOWN },
2187 2188 2189 2190 2191 2192
	{ USB_DEVICE(0xeb1a, 0x2870),
			.driver_info = EM2820_BOARD_UNKNOWN },
	{ USB_DEVICE(0xeb1a, 0x2881),
			.driver_info = EM2820_BOARD_UNKNOWN },
	{ USB_DEVICE(0xeb1a, 0x2883),
			.driver_info = EM2820_BOARD_UNKNOWN },
2193 2194
	{ USB_DEVICE(0xeb1a, 0x2868),
			.driver_info = EM2820_BOARD_UNKNOWN },
2195 2196
	{ USB_DEVICE(0xeb1a, 0x2875),
			.driver_info = EM2820_BOARD_UNKNOWN },
2197 2198
	{ USB_DEVICE(0xeb1a, 0xe300),
			.driver_info = EM2861_BOARD_KWORLD_PVRTV_300U },
2199 2200
	{ USB_DEVICE(0xeb1a, 0xe303),
			.driver_info = EM2860_BOARD_KAIOMY_TVNPC_U2 },
2201 2202 2203 2204
	{ USB_DEVICE(0xeb1a, 0xe305),
			.driver_info = EM2880_BOARD_KWORLD_DVB_305U },
	{ USB_DEVICE(0xeb1a, 0xe310),
			.driver_info = EM2880_BOARD_MSI_DIGIVOX_AD },
2205 2206
	{ USB_DEVICE(0xeb1a, 0xa313),
		.driver_info = EM2882_BOARD_KWORLD_ATSC_315U },
2207
	{ USB_DEVICE(0xeb1a, 0xa316),
2208
			.driver_info = EM2883_BOARD_KWORLD_HYBRID_330U },
2209 2210 2211 2212 2213 2214 2215 2216 2217 2218 2219 2220
	{ USB_DEVICE(0xeb1a, 0xe320),
			.driver_info = EM2880_BOARD_MSI_DIGIVOX_AD_II },
	{ USB_DEVICE(0xeb1a, 0xe323),
			.driver_info = EM2882_BOARD_KWORLD_VS_DVBT },
	{ USB_DEVICE(0xeb1a, 0xe350),
			.driver_info = EM2870_BOARD_KWORLD_350U },
	{ USB_DEVICE(0xeb1a, 0xe355),
			.driver_info = EM2870_BOARD_KWORLD_355U },
	{ USB_DEVICE(0xeb1a, 0x2801),
			.driver_info = EM2800_BOARD_GRABBEEX_USB2800 },
	{ USB_DEVICE(0xeb1a, 0xe357),
			.driver_info = EM2870_BOARD_KWORLD_355U },
A
Aivar Päkk 已提交
2221 2222
	{ USB_DEVICE(0xeb1a, 0xe359),
			.driver_info = EM2870_BOARD_KWORLD_355U },
2223 2224
	{ USB_DEVICE(0x1b80, 0xe302),
			.driver_info = EM2820_BOARD_PINNACLE_DVC_90 }, /* Kaiser Baas Video to DVD maker */
2225 2226
	{ USB_DEVICE(0x1b80, 0xe304),
			.driver_info = EM2820_BOARD_PINNACLE_DVC_90 }, /* Kworld DVD Maker 2 */
2227 2228
	{ USB_DEVICE(0x0ccd, 0x0036),
			.driver_info = EM2820_BOARD_TERRATEC_CINERGY_250 },
2229 2230 2231 2232 2233 2234 2235
	{ USB_DEVICE(0x0ccd, 0x004c),
			.driver_info = EM2880_BOARD_TERRATEC_HYBRID_XS_FR },
	{ USB_DEVICE(0x0ccd, 0x004f),
			.driver_info = EM2860_BOARD_TERRATEC_HYBRID_XS },
	{ USB_DEVICE(0x0ccd, 0x005e),
			.driver_info = EM2882_BOARD_TERRATEC_HYBRID_XS },
	{ USB_DEVICE(0x0ccd, 0x0042),
2236
			.driver_info = EM2882_BOARD_TERRATEC_HYBRID_XS },
2237
	{ USB_DEVICE(0x0ccd, 0x0043),
2238
			.driver_info = EM2870_BOARD_TERRATEC_XS },
2239
	{ USB_DEVICE(0x0ccd, 0x008e),	/* Cinergy HTC USB XS Rev. 1 */
2240
			.driver_info = EM2884_BOARD_TERRATEC_HTC_USB_XS },
2241
	{ USB_DEVICE(0x0ccd, 0x00ac),	/* Cinergy HTC USB XS Rev. 2 */
2242
			.driver_info = EM2884_BOARD_TERRATEC_HTC_USB_XS },
2243
	{ USB_DEVICE(0x0ccd, 0x10a2),	/* H5 Rev. 1 */
2244
			.driver_info = EM2884_BOARD_TERRATEC_H5 },
2245
	{ USB_DEVICE(0x0ccd, 0x10ad),	/* H5 Rev. 2 */
2246
			.driver_info = EM2884_BOARD_TERRATEC_H5 },
2247 2248
	{ USB_DEVICE(0x0ccd, 0x10b6),	/* H5 Rev. 3 */
			.driver_info = EM2884_BOARD_TERRATEC_H5 },
2249 2250
	{ USB_DEVICE(0x0ccd, 0x0084),
			.driver_info = EM2860_BOARD_TERRATEC_AV350 },
2251 2252
	{ USB_DEVICE(0x0ccd, 0x0096),
			.driver_info = EM2860_BOARD_TERRATEC_GRABBY },
T
Teka 已提交
2253 2254
	{ USB_DEVICE(0x0ccd, 0x10AF),
			.driver_info = EM2860_BOARD_TERRATEC_GRABBY },
2255 2256
	{ USB_DEVICE(0x0ccd, 0x00b2),
			.driver_info = EM2884_BOARD_CINERGY_HTC_STICK },
2257 2258
	{ USB_DEVICE(0x0fd9, 0x0033),
			.driver_info = EM2860_BOARD_ELGATO_VIDEO_CAPTURE},
2259 2260
	{ USB_DEVICE(0x185b, 0x2870),
			.driver_info = EM2870_BOARD_COMPRO_VIDEOMATE },
2261
	{ USB_DEVICE(0x185b, 0x2041),
2262
			.driver_info = EM2820_BOARD_COMPRO_VIDEOMATE_FORYOU },
2263 2264
	{ USB_DEVICE(0x2040, 0x4200),
			.driver_info = EM2820_BOARD_HAUPPAUGE_WINTV_USB_2 },
2265 2266
	{ USB_DEVICE(0x2040, 0x4201),
			.driver_info = EM2820_BOARD_HAUPPAUGE_WINTV_USB_2 },
2267 2268
	{ USB_DEVICE(0x2040, 0x6500),
			.driver_info = EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900 },
2269
	{ USB_DEVICE(0x2040, 0x6502),
2270
			.driver_info = EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2 },
2271
	{ USB_DEVICE(0x2040, 0x6513), /* HCW HVR-980 */
2272
			.driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950 },
2273
	{ USB_DEVICE(0x2040, 0x6517), /* HP  HVR-950 */
2274
			.driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950 },
2275
	{ USB_DEVICE(0x2040, 0x651b), /* RP  HVR-950 */
2276
			.driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950 },
2277 2278
	{ USB_DEVICE(0x2040, 0x651f),
			.driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850 },
2279 2280
	{ USB_DEVICE(0x0438, 0xb002),
			.driver_info = EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600 },
2281 2282 2283 2284 2285 2286 2287 2288 2289
	{ USB_DEVICE(0x2001, 0xf112),
			.driver_info = EM2820_BOARD_DLINK_USB_TV },
	{ USB_DEVICE(0x2304, 0x0207),
			.driver_info = EM2820_BOARD_PINNACLE_DVC_90 },
	{ USB_DEVICE(0x2304, 0x0208),
			.driver_info = EM2820_BOARD_PINNACLE_USB_2 },
	{ USB_DEVICE(0x2304, 0x021a),
			.driver_info = EM2820_BOARD_PINNACLE_DVC_90 },
	{ USB_DEVICE(0x2304, 0x0226),
2290
			.driver_info = EM2882_BOARD_PINNACLE_HYBRID_PRO_330E },
2291 2292 2293 2294
	{ USB_DEVICE(0x2304, 0x0227),
			.driver_info = EM2880_BOARD_PINNACLE_PCTV_HD_PRO },
	{ USB_DEVICE(0x0413, 0x6023),
			.driver_info = EM2800_BOARD_LEADTEK_WINFAST_USBII },
2295 2296
	{ USB_DEVICE(0x093b, 0xa003),
		       .driver_info = EM2820_BOARD_PINNACLE_DVC_90 },
2297 2298
	{ USB_DEVICE(0x093b, 0xa005),
			.driver_info = EM2861_BOARD_PLEXTOR_PX_TV100U },
2299 2300
	{ USB_DEVICE(0x04bb, 0x0515),
			.driver_info = EM2820_BOARD_IODATA_GVMVP_SZ },
2301 2302
	{ USB_DEVICE(0xeb1a, 0x50a6),
			.driver_info = EM2860_BOARD_GADMEI_UTV330 },
2303 2304
	{ USB_DEVICE(0x1b80, 0xa340),
			.driver_info = EM2870_BOARD_KWORLD_A340 },
2305 2306
	{ USB_DEVICE(0x1b80, 0xe346),
			.driver_info = EM2874_BOARD_KWORLD_UB435Q_V2 },
2307 2308
	{ USB_DEVICE(0x2013, 0x024f),
			.driver_info = EM28174_BOARD_PCTV_290E },
2309 2310
	{ USB_DEVICE(0x2013, 0x024c),
			.driver_info = EM28174_BOARD_PCTV_460E },
2311 2312
	{ USB_DEVICE(0x2040, 0x1605),
			.driver_info = EM2884_BOARD_HAUPPAUGE_WINTV_HVR_930C },
2313 2314
	{ USB_DEVICE(0x1b80, 0xe755),
			.driver_info = EM2884_BOARD_C3TECH_DIGITAL_DUO },
2315 2316
	{ USB_DEVICE(0xeb1a, 0x5006),
			.driver_info = EM2860_BOARD_HT_VIDBOX_NW03 },
M
Mario Ceresa 已提交
2317 2318
	{ USB_DEVICE(0x1b80, 0xe309), /* Sveon STV40 */
			.driver_info = EM2860_BOARD_EASYCAP },
2319 2320
	{ USB_DEVICE(0x1b80, 0xe425),
			.driver_info = EM2874_BOARD_MAXMEDIA_UB425_TC },
2321 2322
	{ USB_DEVICE(0x2304, 0x0242),
			.driver_info = EM2884_BOARD_PCTV_510E },
2323 2324
	{ USB_DEVICE(0x2013, 0x0251),
			.driver_info = EM2884_BOARD_PCTV_520E },
2325 2326
	{ USB_DEVICE(0x1b80, 0xe1cc),
			.driver_info = EM2874_BOARD_DELOCK_61959 },
2327 2328 2329 2330
	{ USB_DEVICE(0x1ae7, 0x9003),
			.driver_info = EM2765_BOARD_SPEEDLINK_VAD_LAPLACE },
	{ USB_DEVICE(0x1ae7, 0x9004),
			.driver_info = EM2765_BOARD_SPEEDLINK_VAD_LAPLACE },
2331 2332
	{ USB_DEVICE(0x2013, 0x0258),
			.driver_info = EM28178_BOARD_PCTV_461E },
2333 2334
	{ },
};
2335
MODULE_DEVICE_TABLE(usb, em28xx_id_table);
2336

2337 2338 2339
/*
 * EEPROM hash table for devices with generic USB IDs
 */
2340
static struct em28xx_hash_table em28xx_eeprom_hash[] = {
2341
	/* P/N: SA 60002070465 Tuner: TVF7533-MF */
2342
	{0x6ce05a8f, EM2820_BOARD_PROLINK_PLAYTV_USB2, TUNER_YMEC_TVF_5533MF},
2343
	{0x72cc5a8b, EM2820_BOARD_PROLINK_PLAYTV_BOX4_USB2, TUNER_YMEC_TVF_5533MF},
2344
	{0x966a0441, EM2880_BOARD_KWORLD_DVB_310U, TUNER_XC2028},
2345
	{0x166a0441, EM2880_BOARD_EMPIRE_DUAL_TV, TUNER_XC2028},
2346
	{0xcee44a99, EM2882_BOARD_EVGA_INDTUBE, TUNER_XC2028},
2347
	{0xb8846b20, EM2881_BOARD_PINNACLE_HYBRID_PRO, TUNER_XC2028},
2348
	{0x63f653bd, EM2870_BOARD_REDDO_DVB_C_USB_BOX, TUNER_ABSENT},
2349
	{0x4e913442, EM2882_BOARD_DIKOM_DK300, TUNER_XC2028},
2350
};
2351

2352
/* I2C devicelist hash table for devices with generic USB IDs */
2353
static struct em28xx_hash_table em28xx_i2c_hash[] = {
2354 2355
	{0xb06a32c3, EM2800_BOARD_TERRATEC_CINERGY_200, TUNER_LG_PAL_NEW_TAPC},
	{0xf51200e3, EM2800_BOARD_VGEAR_POCKETTV, TUNER_LG_PAL_NEW_TAPC},
2356
	{0x1ba50080, EM2860_BOARD_SAA711X_REFERENCE_DESIGN, TUNER_ABSENT},
2357
	{0x77800080, EM2860_BOARD_TVP5150_REFERENCE_DESIGN, TUNER_ABSENT},
2358
	{0xc51200e3, EM2820_BOARD_GADMEI_TVR200, TUNER_LG_PAL_NEW_TAPC},
2359
	{0x4ba50080, EM2861_BOARD_GADMEI_UTV330PLUS, TUNER_TNF_5335MF},
2360
	{0x6b800080, EM2874_BOARD_LEADERSHIP_ISDBT, TUNER_ABSENT},
2361
};
2362
/* NOTE: introduce a separate hash table for devices with 16 bit eeproms */
2363

2364
int em28xx_tuner_callback(void *ptr, int component, int command, int arg)
2365
{
2366 2367
	struct em28xx_i2c_bus *i2c_bus = ptr;
	struct em28xx *dev = i2c_bus->dev;
2368
	int rc = 0;
2369

2370
	if (dev->tuner_type != TUNER_XC2028 && dev->tuner_type != TUNER_XC5000)
2371 2372
		return 0;

2373
	if (command != XC2028_TUNER_RESET && command != XC5000_TUNER_RESET)
2374 2375
		return 0;

2376
	rc = em28xx_gpio_set(dev, dev->board.tuner_gpio);
2377 2378 2379 2380 2381

	return rc;
}
EXPORT_SYMBOL_GPL(em28xx_tuner_callback);

2382
static inline void em28xx_set_model(struct em28xx *dev)
2383
{
2384
	dev->board = em28xx_boards[dev->model];
2385 2386 2387 2388 2389 2390 2391 2392 2393 2394 2395

	/* Those are the default values for the majority of boards
	   Use those values if not specified otherwise at boards entry
	 */
	if (!dev->board.xclk)
		dev->board.xclk = EM28XX_XCLK_IR_RC5_MODE |
				  EM28XX_XCLK_FREQUENCY_12MHZ;

	if (!dev->board.i2c_speed)
		dev->board.i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
				       EM28XX_I2C_FREQ_100_KHZ;
2396

2397 2398
	/* Should be initialized early, for I2C to work */
	dev->def_i2c_bus = dev->board.def_i2c_bus;
2399 2400
}

2401 2402 2403
/* Since em28xx_pre_card_setup() requires a proper dev->model,
 * this won't work for boards with generic PCI IDs
 */
2404
static void em28xx_pre_card_setup(struct em28xx *dev)
2405
{
2406 2407
	/* Set the initial XCLK and I2C clock values based on the board
	   definition */
2408
	em28xx_write_reg(dev, EM28XX_R0F_XCLK, dev->board.xclk & 0x7f);
2409 2410
	if (!dev->board.is_em2800)
		em28xx_write_reg(dev, EM28XX_R06_I2C_CLK, dev->board.i2c_speed);
2411 2412
	msleep(50);

2413
	/* request some modules */
2414
	switch (dev->model) {
2415
	case EM2861_BOARD_PLEXTOR_PX_TV100U:
2416 2417
		/* Sets the msp34xx I2S speed */
		dev->i2s_speed = 2048000;
2418 2419 2420
		break;
	case EM2861_BOARD_KWORLD_PVRTV_300U:
	case EM2880_BOARD_KWORLD_DVB_305U:
2421
		em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0x6d);
2422
		msleep(10);
2423
		em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0x7d);
2424 2425 2426 2427 2428
		msleep(10);
		break;
	case EM2870_BOARD_COMPRO_VIDEOMATE:
		/* TODO: someone can do some cleanup here...
			 not everything's needed */
2429
		em28xx_write_reg(dev, EM2880_R04_GPO, 0x00);
2430
		msleep(10);
2431
		em28xx_write_reg(dev, EM2880_R04_GPO, 0x01);
2432
		msleep(10);
2433
		em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfd);
2434
		mdelay(70);
2435
		em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfc);
2436
		mdelay(70);
2437
		em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xdc);
2438
		mdelay(70);
2439
		em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfc);
2440 2441 2442 2443 2444
		mdelay(70);
		break;
	case EM2870_BOARD_TERRATEC_XS_MT2060:
		/* this device needs some gpio writes to get the DVB-T
		   demod work */
2445
		em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfe);
2446
		mdelay(70);
2447
		em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xde);
2448
		mdelay(70);
2449
		em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfe);
2450 2451 2452 2453 2454
		mdelay(70);
		break;
	case EM2870_BOARD_PINNACLE_PCTV_DVB:
		/* this device needs some gpio writes to get the
		   DVB-T demod work */
2455
		em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfe);
2456
		mdelay(70);
2457
		em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xde);
2458
		mdelay(70);
2459
		em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfe);
2460 2461 2462 2463
		mdelay(70);
		break;
	case EM2820_BOARD_GADMEI_UTV310:
	case EM2820_BOARD_MSI_VOX_USB_2:
2464
		/* enables audio for that devices */
2465
		em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfd);
2466
		break;
2467

2468
	case EM2882_BOARD_KWORLD_ATSC_315U:
2469
		em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xff);
2470
		msleep(10);
2471
		em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfe);
2472 2473 2474 2475 2476 2477 2478
		msleep(10);
		em28xx_write_reg(dev, EM2880_R04_GPO, 0x00);
		msleep(10);
		em28xx_write_reg(dev, EM2880_R04_GPO, 0x08);
		msleep(10);
		break;

2479 2480 2481 2482 2483 2484 2485 2486 2487 2488 2489 2490 2491
	case EM2860_BOARD_KAIOMY_TVNPC_U2:
		em28xx_write_regs(dev, EM28XX_R0F_XCLK, "\x07", 1);
		em28xx_write_regs(dev, EM28XX_R06_I2C_CLK, "\x40", 1);
		em28xx_write_regs(dev, 0x0d, "\x42", 1);
		em28xx_write_regs(dev, 0x08, "\xfd", 1);
		msleep(10);
		em28xx_write_regs(dev, 0x08, "\xff", 1);
		msleep(10);
		em28xx_write_regs(dev, 0x08, "\x7f", 1);
		msleep(10);
		em28xx_write_regs(dev, 0x08, "\x6b", 1);

		break;
2492 2493 2494 2495
	case EM2860_BOARD_EASYCAP:
		em28xx_write_regs(dev, 0x08, "\xf8", 1);
		break;

2496
	case EM2820_BOARD_IODATA_GVMVP_SZ:
2497
		em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xff);
2498
		msleep(70);
2499
		em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xf7);
2500
		msleep(10);
2501
		em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfe);
2502
		msleep(70);
2503
		em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfd);
2504 2505
		msleep(70);
		break;
2506
	}
2507

2508
	em28xx_gpio_set(dev, dev->board.tuner_gpio);
2509 2510 2511
	em28xx_set_mode(dev, EM28XX_ANALOG_MODE);

	/* Unlock device */
2512
	em28xx_set_mode(dev, EM28XX_SUSPEND);
2513 2514
}

2515 2516 2517
static int em28xx_hint_board(struct em28xx *dev)
{
	int i;
2518

2519 2520 2521 2522 2523 2524 2525 2526 2527 2528 2529 2530
	if (dev->board.is_webcam) {
		if (dev->em28xx_sensor == EM28XX_MT9V011) {
			dev->model = EM2820_BOARD_SILVERCREST_WEBCAM;
		} else if (dev->em28xx_sensor == EM28XX_MT9M001 ||
			   dev->em28xx_sensor == EM28XX_MT9M111) {
			dev->model = EM2750_BOARD_UNKNOWN;
		}
		/* FIXME: IMPROVE ! */

		return 0;
	}

2531 2532 2533 2534 2535 2536 2537 2538 2539 2540 2541 2542
	/* HINT method: EEPROM
	 *
	 * This method works only for boards with eeprom.
	 * Uses a hash of all eeprom bytes. The hash should be
	 * unique for a vendor/tuner pair.
	 * There are a high chance that tuners for different
	 * video standards produce different hashes.
	 */
	for (i = 0; i < ARRAY_SIZE(em28xx_eeprom_hash); i++) {
		if (dev->hash == em28xx_eeprom_hash[i].hash) {
			dev->model = em28xx_eeprom_hash[i].model;
			dev->tuner_type = em28xx_eeprom_hash[i].tuner;
2543

2544 2545 2546 2547 2548 2549 2550
			em28xx_errdev("Your board has no unique USB ID.\n");
			em28xx_errdev("A hint were successfully done, "
				      "based on eeprom hash.\n");
			em28xx_errdev("This method is not 100%% failproof.\n");
			em28xx_errdev("If the board were missdetected, "
				      "please email this log to:\n");
			em28xx_errdev("\tV4L Mailing List "
2551
				      " <linux-media@vger.kernel.org>\n");
2552 2553
			em28xx_errdev("Board detected as %s\n",
				      em28xx_boards[dev->model].name);
2554

2555 2556 2557
			return 0;
		}
	}
2558

2559 2560 2561 2562 2563 2564 2565 2566 2567
	/* HINT method: I2C attached devices
	 *
	 * This method works for all boards.
	 * Uses a hash of i2c scanned devices.
	 * Devices with the same i2c attached chips will
	 * be considered equal.
	 * This method is less precise than the eeprom one.
	 */

2568 2569
	/* user did not request i2c scanning => do it now */
	if (!dev->i2c_hash)
2570
		em28xx_do_i2c_scan(dev, dev->def_i2c_bus);
2571 2572 2573 2574 2575 2576 2577 2578 2579 2580 2581 2582

	for (i = 0; i < ARRAY_SIZE(em28xx_i2c_hash); i++) {
		if (dev->i2c_hash == em28xx_i2c_hash[i].hash) {
			dev->model = em28xx_i2c_hash[i].model;
			dev->tuner_type = em28xx_i2c_hash[i].tuner;
			em28xx_errdev("Your board has no unique USB ID.\n");
			em28xx_errdev("A hint were successfully done, "
				      "based on i2c devicelist hash.\n");
			em28xx_errdev("This method is not 100%% failproof.\n");
			em28xx_errdev("If the board were missdetected, "
				      "please email this log to:\n");
			em28xx_errdev("\tV4L Mailing List "
2583
				      " <linux-media@vger.kernel.org>\n");
2584 2585 2586 2587 2588 2589 2590
			em28xx_errdev("Board detected as %s\n",
				      em28xx_boards[dev->model].name);

			return 0;
		}
	}

2591 2592 2593 2594 2595
	em28xx_errdev("Your board has no unique USB ID and thus need a "
		      "hint to be detected.\n");
	em28xx_errdev("You may try to use card=<n> insmod option to "
		      "workaround that.\n");
	em28xx_errdev("Please send an email with this log to:\n");
2596
	em28xx_errdev("\tV4L Mailing List <linux-media@vger.kernel.org>\n");
2597
	em28xx_errdev("Board eeprom hash is 0x%08lx\n", dev->hash);
2598
	em28xx_errdev("Board i2c devicelist hash is 0x%08lx\n", dev->i2c_hash);
2599 2600 2601 2602 2603 2604 2605 2606

	em28xx_errdev("Here is a list of valid choices for the card=<n>"
		      " insmod option:\n");
	for (i = 0; i < em28xx_bcount; i++) {
		em28xx_errdev("    card=%d -> %s\n",
				i, em28xx_boards[i].name);
	}
	return -1;
2607 2608
}

2609
static void em28xx_card_setup(struct em28xx *dev)
2610
{
2611 2612 2613 2614 2615
	/*
	 * If the device can be a webcam, seek for a sensor.
	 * If sensor is not found, then it isn't a webcam.
	 */
	if (dev->board.is_webcam) {
2616
		if (em28xx_detect_sensor(dev) < 0)
2617 2618 2619
			dev->board.is_webcam = 0;
		else
			dev->progressive = 1;
2620 2621
	}

2622 2623 2624 2625
	switch (dev->model) {
	case EM2750_BOARD_UNKNOWN:
	case EM2820_BOARD_UNKNOWN:
	case EM2800_BOARD_UNKNOWN:
2626 2627 2628 2629 2630 2631 2632 2633 2634 2635 2636 2637 2638 2639 2640 2641 2642 2643 2644 2645
		/*
		 * The K-WORLD DVB-T 310U is detected as an MSI Digivox AD.
		 *
		 * This occurs because they share identical USB vendor and
		 * product IDs.
		 *
		 * What we do here is look up the EEPROM hash of the K-WORLD
		 * and if it is found then we decide that we do not have
		 * a DIGIVOX and reset the device to the K-WORLD instead.
		 *
		 * This solution is only valid if they do not share eeprom
		 * hash identities which has not been determined as yet.
		 */
		if (em28xx_hint_board(dev) < 0)
			em28xx_errdev("Board not discovered\n");
		else {
			em28xx_set_model(dev);
			em28xx_pre_card_setup(dev);
		}
		break;
2646 2647
	default:
		em28xx_set_model(dev);
2648
	}
2649 2650 2651

	em28xx_info("Identified as %s (card=%d)\n",
		    dev->board.name, dev->model);
2652 2653

	dev->tuner_type = em28xx_boards[dev->model].tuner_type;
2654 2655
	if (em28xx_boards[dev->model].tuner_addr)
		dev->tuner_addr = em28xx_boards[dev->model].tuner_addr;
2656

2657 2658 2659
	if (em28xx_boards[dev->model].tda9887_conf)
		dev->tda9887_conf = em28xx_boards[dev->model].tda9887_conf;

2660
	/* request some modules */
2661 2662
	switch (dev->model) {
	case EM2820_BOARD_HAUPPAUGE_WINTV_USB_2:
2663
	case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900:
2664
	case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2:
2665
	case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850:
2666
	case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950:
2667
	case EM2884_BOARD_HAUPPAUGE_WINTV_HVR_930C:
2668 2669
	{
		struct tveeprom tv;
2670 2671 2672

		if (dev->eedata == NULL)
			break;
2673
#if defined(CONFIG_MODULES) && defined(MODULE)
2674
		request_module("tveeprom");
2675
#endif
2676 2677
		/* Call first TVeeprom */

2678 2679
		dev->i2c_client[dev->def_i2c_bus].addr = 0xa0 >> 1;
		tveeprom_hauppauge_analog(&dev->i2c_client[dev->def_i2c_bus], &tv, dev->eedata);
2680

2681
		dev->tuner_type = tv.tuner_type;
2682

2683
		if (tv.audio_processor == TVEEPROM_AUDPROC_MSP) {
2684
			dev->i2s_speed = 2048000;
2685
			dev->board.has_msp34xx = 1;
2686 2687
		}
		break;
2688
	}
2689 2690 2691
	case EM2882_BOARD_KWORLD_ATSC_315U:
		em28xx_write_reg(dev, 0x0d, 0x42);
		msleep(10);
2692
		em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfd);
2693 2694
		msleep(10);
		break;
2695 2696
	case EM2820_BOARD_KWORLD_PVRTV2800RF:
		/* GPIO enables sound on KWORLD PVR TV 2800RF */
2697
		em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xf9);
2698 2699 2700
		break;
	case EM2820_BOARD_UNKNOWN:
	case EM2800_BOARD_UNKNOWN:
2701 2702 2703 2704 2705 2706 2707 2708 2709 2710 2711 2712 2713 2714
		/*
		 * The K-WORLD DVB-T 310U is detected as an MSI Digivox AD.
		 *
		 * This occurs because they share identical USB vendor and
		 * product IDs.
		 *
		 * What we do here is look up the EEPROM hash of the K-WORLD
		 * and if it is found then we decide that we do not have
		 * a DIGIVOX and reset the device to the K-WORLD instead.
		 *
		 * This solution is only valid if they do not share eeprom
		 * hash identities which has not been determined as yet.
		 */
	case EM2880_BOARD_MSI_DIGIVOX_AD:
2715 2716
		if (!em28xx_hint_board(dev))
			em28xx_set_model(dev);
2717 2718

		/* In cases where we had to use a board hint, the call to
2719 2720 2721 2722 2723 2724 2725
		   em28xx_set_mode() in em28xx_pre_card_setup() was a no-op,
		   so make the call now so the analog GPIOs are set properly
		   before probing the i2c bus. */
		em28xx_gpio_set(dev, dev->board.tuner_gpio);
		em28xx_set_mode(dev, EM28XX_ANALOG_MODE);
		break;

2726
		/*
2727 2728 2729 2730 2731 2732 2733 2734 2735 2736 2737 2738 2739 2740 2741 2742 2743
		 * The Dikom DK300 is detected as an Kworld VS-DVB-T 323UR.
		 *
		 * This occurs because they share identical USB vendor and
		 * product IDs.
		 *
		 * What we do here is look up the EEPROM hash of the Dikom
		 * and if it is found then we decide that we do not have
		 * a Kworld and reset the device to the Dikom instead.
		 *
		 * This solution is only valid if they do not share eeprom
		 * hash identities which has not been determined as yet.
		 */
	case EM2882_BOARD_KWORLD_VS_DVBT:
		if (!em28xx_hint_board(dev))
			em28xx_set_model(dev);

		/* In cases where we had to use a board hint, the call to
2744 2745 2746
		   em28xx_set_mode() in em28xx_pre_card_setup() was a no-op,
		   so make the call now so the analog GPIOs are set properly
		   before probing the i2c bus. */
2747
		em28xx_gpio_set(dev, dev->board.tuner_gpio);
2748
		em28xx_set_mode(dev, EM28XX_ANALOG_MODE);
2749
		break;
2750 2751
	}

2752
	if (dev->board.valid == EM28XX_BOARD_NOT_VALIDATED) {
2753 2754 2755 2756 2757 2758 2759 2760
		em28xx_errdev("\n\n");
		em28xx_errdev("The support for this board weren't "
			      "valid yet.\n");
		em28xx_errdev("Please send a report of having this working\n");
		em28xx_errdev("not to V4L mailing list (and/or to other "
				"addresses)\n\n");
	}

2761 2762 2763 2764
	/* Free eeprom data memory */
	kfree(dev->eedata);
	dev->eedata = NULL;

2765
	/* Allow override tuner type by a module parameter */
2766 2767
	if (tuner >= 0)
		dev->tuner_type = tuner;
2768
}
2769

2770 2771 2772 2773 2774 2775 2776 2777 2778 2779 2780 2781 2782 2783 2784 2785 2786 2787 2788 2789 2790 2791 2792 2793 2794 2795 2796 2797 2798 2799 2800 2801 2802 2803 2804 2805 2806 2807 2808 2809 2810 2811 2812 2813 2814 2815 2816 2817 2818
void em28xx_setup_xc3028(struct em28xx *dev, struct xc2028_ctrl *ctl)
{
	memset(ctl, 0, sizeof(*ctl));

	ctl->fname   = XC2028_DEFAULT_FIRMWARE;
	ctl->max_len = 64;
	ctl->mts = em28xx_boards[dev->model].mts_firmware;

	switch (dev->model) {
	case EM2880_BOARD_EMPIRE_DUAL_TV:
	case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900:
	case EM2882_BOARD_TERRATEC_HYBRID_XS:
		ctl->demod = XC3028_FE_ZARLINK456;
		break;
	case EM2880_BOARD_TERRATEC_HYBRID_XS:
	case EM2880_BOARD_TERRATEC_HYBRID_XS_FR:
	case EM2881_BOARD_PINNACLE_HYBRID_PRO:
		ctl->demod = XC3028_FE_ZARLINK456;
		break;
	case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2:
	case EM2882_BOARD_PINNACLE_HYBRID_PRO_330E:
		ctl->demod = XC3028_FE_DEFAULT;
		break;
	case EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600:
		ctl->demod = XC3028_FE_DEFAULT;
		ctl->fname = XC3028L_DEFAULT_FIRMWARE;
		break;
	case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850:
	case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950:
	case EM2880_BOARD_PINNACLE_PCTV_HD_PRO:
		/* FIXME: Better to specify the needed IF */
		ctl->demod = XC3028_FE_DEFAULT;
		break;
	case EM2883_BOARD_KWORLD_HYBRID_330U:
	case EM2882_BOARD_DIKOM_DK300:
	case EM2882_BOARD_KWORLD_VS_DVBT:
		ctl->demod = XC3028_FE_CHINA;
		ctl->fname = XC2028_DEFAULT_FIRMWARE;
		break;
	case EM2882_BOARD_EVGA_INDTUBE:
		ctl->demod = XC3028_FE_CHINA;
		ctl->fname = XC3028L_DEFAULT_FIRMWARE;
		break;
	default:
		ctl->demod = XC3028_FE_OREN538;
	}
}
EXPORT_SYMBOL_GPL(em28xx_setup_xc3028);

2819 2820 2821 2822 2823
static void request_module_async(struct work_struct *work)
{
	struct em28xx *dev = container_of(work,
			     struct em28xx, request_module_wk);

2824 2825 2826 2827 2828 2829
	/*
	 * The em28xx extensions can be modules or builtin. If the
	 * modules are already loaded or are built in, those extensions
	 * can be initialised right now. Otherwise, the module init
	 * code will do it.
	 */
2830 2831 2832 2833 2834 2835 2836 2837 2838 2839 2840 2841

	/*
	 * Devicdes with an audio-only interface also have a V4L/DVB/RC
	 * interface. Don't register extensions twice on those devices.
	 */
	if (dev->is_audio_only) {
#if defined(CONFIG_MODULES) && defined(MODULE)
		request_module("em28xx-alsa");
#endif
		return;
	}

2842 2843 2844
	em28xx_init_extension(dev);

#if defined(CONFIG_MODULES) && defined(MODULE)
2845 2846
	if (dev->has_video)
		request_module("em28xx-v4l");
2847 2848 2849 2850 2851 2852
	if (dev->has_audio_class)
		request_module("snd-usb-audio");
	else if (dev->has_alsa_audio)
		request_module("em28xx-alsa");
	if (dev->board.has_dvb)
		request_module("em28xx-dvb");
2853
	if (dev->board.buttons ||
2854
	    ((dev->board.ir_codes || dev->board.has_ir_i2c) && !disable_ir))
2855
		request_module("em28xx-rc");
2856
#endif /* CONFIG_MODULES */
2857 2858 2859 2860 2861 2862 2863
}

static void request_modules(struct em28xx *dev)
{
	INIT_WORK(&dev->request_module_wk, request_module_async);
	schedule_work(&dev->request_module_wk);
}
2864 2865 2866

static void flush_request_modules(struct em28xx *dev)
{
2867
	flush_work(&dev->request_module_wk);
2868
}
2869 2870

/*
2871
 * em28xx_release_resources()
2872
 * unregisters the v4l2,i2c and usb devices
2873
 * called when the device gets disconnected or at module unload
2874 2875 2876 2877 2878
*/
void em28xx_release_resources(struct em28xx *dev)
{
	/*FIXME: I2C IR should be disconnected */

2879 2880
	mutex_lock(&dev->lock);

2881 2882 2883
	if (dev->def_i2c_bus)
		em28xx_i2c_unregister(dev, 1);
	em28xx_i2c_unregister(dev, 0);
2884

2885 2886 2887
	usb_put_dev(dev->udev);

	/* Mark device as unused */
2888
	clear_bit(dev->devno, &em28xx_devused);
2889 2890

	mutex_unlock(&dev->lock);
2891
};
2892
EXPORT_SYMBOL_GPL(em28xx_release_resources);
2893 2894 2895 2896 2897

/*
 * em28xx_init_dev()
 * allocates and inits the device structs, registers i2c bus and v4l device
 */
2898
static int em28xx_init_dev(struct em28xx *dev, struct usb_device *udev,
2899
			   struct usb_interface *interface,
2900 2901
			   int minor)
{
2902
	int retval;
2903 2904
	static const char *default_chip_name = "em28xx";
	const char *chip_name = default_chip_name;
2905 2906

	dev->udev = udev;
2907 2908
	mutex_init(&dev->vb_queue_lock);
	mutex_init(&dev->vb_vbi_queue_lock);
2909 2910 2911 2912 2913 2914 2915 2916 2917 2918
	mutex_init(&dev->ctrl_urb_lock);
	spin_lock_init(&dev->slock);

	dev->em28xx_write_regs = em28xx_write_regs;
	dev->em28xx_read_reg = em28xx_read_reg;
	dev->em28xx_read_reg_req_len = em28xx_read_reg_req_len;
	dev->em28xx_write_regs_req = em28xx_write_regs_req;
	dev->em28xx_read_reg_req = em28xx_read_reg_req;
	dev->board.is_em2800 = em28xx_boards[dev->model].is_em2800;

2919 2920 2921 2922 2923 2924 2925 2926 2927 2928
	em28xx_set_model(dev);

	dev->wait_after_write = 5;

	/* Based on the Chip ID, set the device configuration */
	retval = em28xx_read_reg(dev, EM28XX_R0A_CHIPID);
	if (retval > 0) {
		dev->chip_id = retval;

		switch (dev->chip_id) {
2929
		case CHIP_ID_EM2800:
2930
			chip_name = "em2800";
2931
			break;
2932
		case CHIP_ID_EM2710:
2933
			chip_name = "em2710";
2934 2935
			break;
		case CHIP_ID_EM2750:
2936
			chip_name = "em2750";
2937
			break;
2938 2939 2940 2941 2942 2943
		case CHIP_ID_EM2765:
			chip_name = "em2765";
			dev->wait_after_write = 0;
			dev->is_em25xx = 1;
			dev->eeprom_addrwidth_16bit = 1;
			break;
2944
		case CHIP_ID_EM2820:
2945
			chip_name = "em2710/2820";
2946 2947
			if (le16_to_cpu(dev->udev->descriptor.idVendor)
								    == 0xeb1a) {
2948 2949 2950 2951 2952 2953 2954
				__le16 idProd = dev->udev->descriptor.idProduct;
				if (le16_to_cpu(idProd) == 0x2710)
					chip_name = "em2710";
				else if (le16_to_cpu(idProd) == 0x2820)
					chip_name = "em2820";
			}
			/* NOTE: the em2820 is used in webcams, too ! */
2955 2956
			break;
		case CHIP_ID_EM2840:
2957
			chip_name = "em2840";
2958 2959
			break;
		case CHIP_ID_EM2860:
2960
			chip_name = "em2860";
2961 2962
			break;
		case CHIP_ID_EM2870:
2963
			chip_name = "em2870";
2964 2965 2966
			dev->wait_after_write = 0;
			break;
		case CHIP_ID_EM2874:
2967
			chip_name = "em2874";
2968
			dev->wait_after_write = 0;
2969
			dev->eeprom_addrwidth_16bit = 1;
2970
			break;
2971
		case CHIP_ID_EM28174:
2972
			chip_name = "em28174";
2973
			dev->wait_after_write = 0;
2974
			dev->eeprom_addrwidth_16bit = 1;
2975
			break;
2976 2977 2978 2979 2980
		case CHIP_ID_EM28178:
			chip_name = "em28178";
			dev->wait_after_write = 0;
			dev->eeprom_addrwidth_16bit = 1;
			break;
2981
		case CHIP_ID_EM2883:
2982
			chip_name = "em2882/3";
2983 2984
			dev->wait_after_write = 0;
			break;
2985
		case CHIP_ID_EM2884:
2986
			chip_name = "em2884";
2987
			dev->wait_after_write = 0;
2988
			dev->eeprom_addrwidth_16bit = 1;
2989
			break;
2990
		default:
2991 2992
			printk(KERN_INFO DRIVER_NAME
			       ": unknown em28xx chip ID (%d)\n", dev->chip_id);
2993 2994 2995
		}
	}

2996 2997 2998 2999 3000 3001 3002 3003 3004 3005
	if (dev->chip_id == CHIP_ID_EM2870 ||
	    dev->chip_id == CHIP_ID_EM2874 ||
	    dev->chip_id == CHIP_ID_EM28174 ||
	    dev->chip_id == CHIP_ID_EM28178) {
		/* Digital only device - don't load any alsa module */
		dev->audio_mode.has_audio = false;
		dev->has_audio_class = false;
		dev->has_alsa_audio = false;
	}

3006 3007 3008 3009 3010 3011 3012 3013 3014 3015
	if (chip_name != default_chip_name)
		printk(KERN_INFO DRIVER_NAME
		       ": chip ID is %s\n", chip_name);

	/*
	 * For em2820/em2710, the name may change latter, after checking
	 * if the device has a sensor (so, it is em2710) or not.
	 */
	snprintf(dev->name, sizeof(dev->name), "%s #%d", chip_name, dev->devno);

3016
	if (dev->is_audio_only) {
3017 3018
		retval = em28xx_audio_setup(dev);
		if (retval)
3019 3020 3021 3022 3023 3024
			return -ENODEV;
		em28xx_init_extension(dev);

		return 0;
	}

3025 3026 3027
	em28xx_pre_card_setup(dev);

	if (!dev->board.is_em2800) {
3028
		/* Resets I2C speed */
3029
		retval = em28xx_write_reg(dev, EM28XX_R06_I2C_CLK, dev->board.i2c_speed);
3030
		if (retval < 0) {
3031
			em28xx_errdev("%s: em28xx_write_reg failed!"
3032 3033 3034 3035 3036 3037
				      " retval [%d]\n",
				      __func__, retval);
			return retval;
		}
	}

3038 3039 3040
	rt_mutex_init(&dev->i2c_bus_lock);

	/* register i2c bus 0 */
3041 3042 3043 3044
	if (dev->board.is_em2800)
		retval = em28xx_i2c_register(dev, 0, EM28XX_I2C_ALGO_EM2800);
	else
		retval = em28xx_i2c_register(dev, 0, EM28XX_I2C_ALGO_EM28XX);
3045
	if (retval < 0) {
3046
		em28xx_errdev("%s: em28xx_i2c_register bus 0 - error [%d]!\n",
3047
			__func__, retval);
3048
		return retval;
3049 3050
	}

3051
	/* register i2c bus 1 */
3052
	if (dev->def_i2c_bus) {
3053 3054 3055 3056 3057 3058
		if (dev->is_em25xx)
			retval = em28xx_i2c_register(dev, 1,
						  EM28XX_I2C_ALGO_EM25XX_BUS_B);
		else
			retval = em28xx_i2c_register(dev, 1,
							EM28XX_I2C_ALGO_EM28XX);
3059 3060 3061
		if (retval < 0) {
			em28xx_errdev("%s: em28xx_i2c_register bus 1 - error [%d]!\n",
				__func__, retval);
3062 3063 3064

			em28xx_i2c_unregister(dev, 0);

3065
			return retval;
3066 3067 3068
		}
	}

3069 3070 3071 3072 3073 3074
	/* Do board specific init and eeprom reading */
	em28xx_card_setup(dev);

	return 0;
}

3075 3076 3077
/* high bandwidth multiplier, as encoded in highspeed endpoint descriptors */
#define hb_mult(wMaxPacketSize) (1 + (((wMaxPacketSize) >> 11) & 0x03))

3078 3079 3080 3081 3082 3083 3084 3085 3086
/*
 * em28xx_usb_probe()
 * checks for supported devices
 */
static int em28xx_usb_probe(struct usb_interface *interface,
			    const struct usb_device_id *id)
{
	struct usb_device *udev;
	struct em28xx *dev = NULL;
3087
	int retval;
3088
	bool has_audio = false, has_video = false, has_dvb = false;
3089
	int i, nr, try_bulk;
3090
	const int ifnum = interface->altsetting[0].desc.bInterfaceNumber;
3091 3092 3093 3094 3095
	char *speed;

	udev = usb_get_dev(interface_to_usbdev(interface));

	/* Check to see next free device and mark as used */
3096 3097 3098 3099 3100 3101 3102 3103 3104 3105
	do {
		nr = find_first_zero_bit(&em28xx_devused, EM28XX_MAXBOARDS);
		if (nr >= EM28XX_MAXBOARDS) {
			/* No free device slots */
			printk(DRIVER_NAME ": Supports only %i em28xx boards.\n",
					EM28XX_MAXBOARDS);
			retval = -ENOMEM;
			goto err_no_slot;
		}
	} while (test_and_set_bit(nr, &em28xx_devused));
3106 3107 3108 3109 3110 3111 3112 3113 3114 3115

	/* Don't register audio interfaces */
	if (interface->altsetting[0].desc.bInterfaceClass == USB_CLASS_AUDIO) {
		em28xx_err(DRIVER_NAME " audio device (%04x:%04x): "
			"interface %i, class %i\n",
			le16_to_cpu(udev->descriptor.idVendor),
			le16_to_cpu(udev->descriptor.idProduct),
			ifnum,
			interface->altsetting[0].desc.bInterfaceClass);

3116 3117
		retval = -ENODEV;
		goto err;
3118 3119
	}

3120 3121 3122 3123 3124 3125 3126 3127 3128
	/* allocate memory for our device state and initialize it */
	dev = kzalloc(sizeof(*dev), GFP_KERNEL);
	if (dev == NULL) {
		em28xx_err(DRIVER_NAME ": out of memory!\n");
		retval = -ENOMEM;
		goto err;
	}

	/* compute alternate max packet sizes */
3129 3130
	dev->alt_max_pkt_size_isoc =
				kmalloc(sizeof(dev->alt_max_pkt_size_isoc[0]) *
3131
					interface->num_altsetting, GFP_KERNEL);
3132
	if (dev->alt_max_pkt_size_isoc == NULL) {
3133 3134 3135 3136 3137 3138
		em28xx_errdev("out of memory!\n");
		kfree(dev);
		retval = -ENOMEM;
		goto err;
	}

3139 3140 3141 3142 3143
	/* Get endpoints */
	for (i = 0; i < interface->num_altsetting; i++) {
		int ep;

		for (ep = 0; ep < interface->altsetting[i].desc.bNumEndpoints; ep++) {
3144 3145 3146 3147 3148 3149 3150 3151 3152 3153 3154
			const struct usb_endpoint_descriptor *e;
			int sizedescr, size;

			e = &interface->altsetting[i].endpoint[ep].desc;

			sizedescr = le16_to_cpu(e->wMaxPacketSize);
			size = sizedescr & 0x7ff;

			if (udev->speed == USB_SPEED_HIGH)
				size = size * hb_mult(sizedescr);

3155
			if (usb_endpoint_dir_in(e)) {
3156
				switch (e->bEndpointAddress) {
3157
				case 0x82:
3158
					has_video = true;
3159 3160 3161 3162 3163 3164 3165 3166 3167 3168 3169 3170 3171 3172 3173 3174
					if (usb_endpoint_xfer_isoc(e)) {
						dev->analog_ep_isoc =
							    e->bEndpointAddress;
						dev->alt_max_pkt_size_isoc[i] = size;
					} else if (usb_endpoint_xfer_bulk(e)) {
						dev->analog_ep_bulk =
							    e->bEndpointAddress;
					}
					break;
				case 0x83:
					if (usb_endpoint_xfer_isoc(e)) {
						has_audio = true;
					} else {
						printk(KERN_INFO DRIVER_NAME
						": error: skipping audio endpoint 0x83, because it uses bulk transfers !\n");
					}
3175
					break;
3176 3177 3178 3179 3180 3181 3182 3183
				case 0x84:
					if (has_video &&
					    (usb_endpoint_xfer_bulk(e))) {
						dev->analog_ep_bulk =
							    e->bEndpointAddress;
					} else {
						if (usb_endpoint_xfer_isoc(e)) {
							if (size > dev->dvb_max_pkt_size_isoc) {
3184
								has_dvb = true; /* see NOTE (~) */
3185
								dev->dvb_ep_isoc = e->bEndpointAddress;
3186 3187 3188 3189
								dev->dvb_max_pkt_size_isoc = size;
								dev->dvb_alt_isoc = i;
							}
						} else {
3190
							has_dvb = true;
3191 3192
							dev->dvb_ep_bulk = e->bEndpointAddress;
						}
3193 3194 3195 3196
					}
					break;
				}
			}
3197 3198 3199 3200 3201 3202 3203 3204 3205 3206 3207 3208 3209 3210 3211 3212 3213 3214 3215 3216
			/* NOTE:
			 * Old logic with support for isoc transfers only was:
			 *  0x82	isoc		=> analog
			 *  0x83	isoc		=> audio
			 *  0x84	isoc		=> digital
			 *
			 * New logic with support for bulk transfers
			 *  0x82	isoc		=> analog
			 *  0x82	bulk		=> analog
			 *  0x83	isoc*		=> audio
			 *  0x84	isoc		=> digital
			 *  0x84	bulk		=> analog or digital**
			 * (*: audio should always be isoc)
			 * (**: analog, if ep 0x82 is isoc, otherwise digital)
			 *
			 * The new logic preserves backwards compatibility and
			 * reflects the endpoint configurations we have seen
			 * so far. But there might be devices for which this
			 * logic is not sufficient...
			 */
3217 3218 3219 3220 3221 3222
			/*
			 * NOTE (~): some manufacturers (e.g. Terratec) disable
			 * endpoints by setting wMaxPacketSize to 0 bytes for
			 * all alt settings. So far, we've seen this for
			 * DVB isoc endpoints only.
			 */
3223 3224 3225
		}
	}

3226 3227 3228
	if (!(has_audio || has_video || has_dvb)) {
		retval = -ENODEV;
		goto err_free;
3229 3230 3231 3232 3233 3234 3235 3236 3237 3238 3239 3240 3241 3242 3243 3244 3245
	}

	switch (udev->speed) {
	case USB_SPEED_LOW:
		speed = "1.5";
		break;
	case USB_SPEED_UNKNOWN:
	case USB_SPEED_FULL:
		speed = "12";
		break;
	case USB_SPEED_HIGH:
		speed = "480";
		break;
	default:
		speed = "unknown";
	}

3246
	printk(KERN_INFO DRIVER_NAME
3247 3248 3249 3250
		": New device %s %s @ %s Mbps "
		"(%04x:%04x, interface %d, class %d)\n",
		udev->manufacturer ? udev->manufacturer : "",
		udev->product ? udev->product : "",
3251 3252 3253 3254 3255 3256
		speed,
		le16_to_cpu(udev->descriptor.idVendor),
		le16_to_cpu(udev->descriptor.idProduct),
		ifnum,
		interface->altsetting->desc.bInterfaceNumber);

3257 3258 3259 3260 3261
	/*
	 * Make sure we have 480 Mbps of bandwidth, otherwise things like
	 * video stream wouldn't likely work, since 12 Mbps is generally
	 * not enough even for most Digital TV streams.
	 */
3262
	if (udev->speed != USB_SPEED_HIGH && disable_usb_speed_check == 0) {
3263 3264 3265 3266
		printk(DRIVER_NAME ": Device initialization failed.\n");
		printk(DRIVER_NAME ": Device must be connected to a high-speed"
		       " USB 2.0 port.\n");
		retval = -ENODEV;
3267
		goto err_free;
3268 3269 3270 3271 3272
	}

	dev->devno = nr;
	dev->model = id->driver_info;
	dev->alt   = -1;
3273
	dev->is_audio_only = has_audio && !(has_video || has_dvb);
3274
	dev->has_alsa_audio = has_audio;
3275
	dev->audio_mode.has_audio = has_audio;
3276
	dev->has_video = has_video;
3277
	dev->audio_ifnum = ifnum;
3278 3279 3280

	/* Checks if audio is provided by some interface */
	for (i = 0; i < udev->config->desc.bNumInterfaces; i++) {
3281
		struct usb_interface *uif = udev->config->interface[i];
3282 3283 3284 3285 3286 3287
		if (uif->altsetting[0].desc.bInterfaceClass == USB_CLASS_AUDIO) {
			dev->has_audio_class = 1;
			break;
		}
	}

3288 3289 3290 3291 3292 3293 3294 3295 3296 3297 3298 3299 3300 3301 3302 3303 3304 3305
	if (has_audio)
		printk(KERN_INFO DRIVER_NAME
		       ": Audio interface %i found %s\n",
		       ifnum,
		       dev->has_audio_class ? "(USB Audio Class)" : "(Vendor Class)");
	if (has_video)
		printk(KERN_INFO DRIVER_NAME
		       ": Video interface %i found:%s%s\n",
		       ifnum,
		       dev->analog_ep_bulk ? " bulk" : "",
		       dev->analog_ep_isoc ? " isoc" : "");
	if (has_dvb)
		printk(KERN_INFO DRIVER_NAME
		       ": DVB interface %i found:%s%s\n",
		       ifnum,
		       dev->dvb_ep_bulk ? " bulk" : "",
		       dev->dvb_ep_isoc ? " isoc" : "");

3306
	dev->num_alt = interface->num_altsetting;
3307

3308
	if ((unsigned)card[nr] < em28xx_bcount)
3309 3310
		dev->model = card[nr];

3311 3312 3313
	/* save our data pointer in this interface device */
	usb_set_intfdata(interface, dev);

3314 3315
	/* allocate device struct */
	mutex_init(&dev->lock);
3316
	retval = em28xx_init_dev(dev, udev, interface, nr);
3317
	if (retval) {
3318
		goto err_free;
3319 3320
	}

3321
	if (usb_xfer_mode < 0) {
3322 3323 3324 3325 3326
		if (dev->board.is_webcam)
			try_bulk = 1;
		else
			try_bulk = 0;
	} else {
3327
		try_bulk = usb_xfer_mode > 0;
3328 3329 3330 3331 3332 3333 3334 3335 3336
	}

	/* Select USB transfer types to use */
	if (has_video) {
	    if (!dev->analog_ep_isoc || (try_bulk && dev->analog_ep_bulk))
		dev->analog_xfer_bulk = 1;
		em28xx_info("analog set to %s mode.\n",
			    dev->analog_xfer_bulk ? "bulk" : "isoc");
	}
3337
	if (has_dvb) {
3338 3339 3340 3341 3342
	    if (!dev->dvb_ep_isoc || (try_bulk && dev->dvb_ep_bulk))
		dev->dvb_xfer_bulk = 1;

		em28xx_info("dvb set to %s mode.\n",
			    dev->dvb_xfer_bulk ? "bulk" : "isoc");
3343 3344
	}

3345 3346 3347 3348 3349 3350 3351
	request_modules(dev);

	/* Should be the last thing to do, to avoid newer udev's to
	   open the device before fully initializing it
	 */

	return 0;
3352

3353
err_free:
3354
	kfree(dev->alt_max_pkt_size_isoc);
3355 3356
	kfree(dev);

3357
err:
3358 3359 3360 3361
	clear_bit(nr, &em28xx_devused);

err_no_slot:
	usb_put_dev(udev);
3362
	return retval;
3363 3364 3365 3366
}

/*
 * em28xx_usb_disconnect()
3367
 * called when the device gets disconnected
3368 3369 3370 3371 3372 3373 3374 3375 3376 3377 3378 3379
 * video device will be unregistered on v4l2_close in case it is still open
 */
static void em28xx_usb_disconnect(struct usb_interface *interface)
{
	struct em28xx *dev;

	dev = usb_get_intfdata(interface);
	usb_set_intfdata(interface, NULL);

	if (!dev)
		return;

3380 3381
	dev->disconnected = 1;

3382 3383 3384 3385 3386
	if (dev->is_audio_only) {
		em28xx_close_extension(dev);
		return;
	}

3387 3388
	em28xx_info("disconnecting %s\n", dev->vdev->name);

3389 3390
	flush_request_modules(dev);

3391
	em28xx_close_extension(dev);
3392

3393
	em28xx_release_resources(dev);
3394 3395

	if (!dev->users) {
3396
		kfree(dev->alt_max_pkt_size_isoc);
3397 3398 3399 3400 3401 3402 3403 3404 3405 3406 3407
		kfree(dev);
	}
}

static struct usb_driver em28xx_usb_driver = {
	.name = "em28xx",
	.probe = em28xx_usb_probe,
	.disconnect = em28xx_usb_disconnect,
	.id_table = em28xx_id_table,
};

3408
module_usb_driver(em28xx_usb_driver);