Kconfig 28.4 KB
Newer Older
L
Linus Torvalds 已提交
1 2 3 4 5
#
# Sensor device configuration
#

menu "I2C Hardware Bus support"
P
Peter Huewe 已提交
6
	depends on HAS_IOMEM
L
Linus Torvalds 已提交
7

J
Jean Delvare 已提交
8 9 10
comment "PC SMBus host controller drivers"
	depends on PCI

L
Linus Torvalds 已提交
11 12
config I2C_ALI1535
	tristate "ALI 1535"
J
Jan Engelhardt 已提交
13
	depends on PCI
L
Linus Torvalds 已提交
14 15 16 17 18 19 20 21 22 23 24
	help
	  If you say yes to this option, support will be included for the SMB
	  Host controller on Acer Labs Inc. (ALI) M1535 South Bridges.  The SMB
	  controller is part of the 7101 device, which is an ACPI-compliant
	  Power Management Unit (PMU).

	  This driver can also be built as a module.  If so, the module
	  will be called i2c-ali1535.

config I2C_ALI1563
	tristate "ALI 1563"
25
	depends on PCI
L
Linus Torvalds 已提交
26 27 28 29 30 31 32 33 34 35 36
	help
	  If you say yes to this option, support will be included for the SMB
	  Host controller on Acer Labs Inc. (ALI) M1563 South Bridges.  The SMB
	  controller is part of the 7101 device, which is an ACPI-compliant
	  Power Management Unit (PMU).

	  This driver can also be built as a module.  If so, the module
	  will be called i2c-ali1563.

config I2C_ALI15X3
	tristate "ALI 15x3"
J
Jan Engelhardt 已提交
37
	depends on PCI
L
Linus Torvalds 已提交
38 39 40 41 42 43 44 45 46
	help
	  If you say yes to this option, support will be included for the
	  Acer Labs Inc. (ALI) M1514 and M1543 motherboard I2C interfaces.

	  This driver can also be built as a module.  If so, the module
	  will be called i2c-ali15x3.

config I2C_AMD756
	tristate "AMD 756/766/768/8111 and nVidia nForce"
J
Jan Engelhardt 已提交
47
	depends on PCI
L
Linus Torvalds 已提交
48 49 50 51 52 53 54 55 56 57 58
	help
	  If you say yes to this option, support will be included for the AMD
	  756/766/768 mainboard I2C interfaces.  The driver also includes
	  support for the first (SMBus 1.0) I2C interface of the AMD 8111 and
	  the nVidia nForce I2C interface.

	  This driver can also be built as a module.  If so, the module
	  will be called i2c-amd756.

config I2C_AMD756_S4882
	tristate "SMBus multiplexing on the Tyan S4882"
59
	depends on I2C_AMD756 && X86
L
Linus Torvalds 已提交
60 61 62 63 64 65 66 67 68 69 70 71
	help
	  Enabling this option will add specific SMBus support for the Tyan
	  S4882 motherboard.  On this 4-CPU board, the SMBus is multiplexed
	  over 8 different channels, where the various memory module EEPROMs
	  and temperature sensors live.  Saying yes here will give you access
	  to these in addition to the trunk.

	  This driver can also be built as a module.  If so, the module
	  will be called i2c-amd756-s4882.

config I2C_AMD8111
	tristate "AMD 8111"
J
Jan Engelhardt 已提交
72
	depends on PCI
L
Linus Torvalds 已提交
73 74 75 76 77 78 79 80
	help
	  If you say yes to this option, support will be included for the
	  second (SMBus 2.0) AMD 8111 mainboard I2C interface.

	  This driver can also be built as a module.  If so, the module
	  will be called i2c-amd8111.

config I2C_I801
81
	tristate "Intel 82801 (ICH/PCH)"
J
Jan Engelhardt 已提交
82
	depends on PCI
83
	select CHECK_SIGNATURE if X86 && DMI
L
Linus Torvalds 已提交
84 85 86 87 88 89 90 91 92 93 94 95 96
	help
	  If you say yes to this option, support will be included for the Intel
	  801 family of mainboard I2C interfaces.  Specifically, the following
	  versions of the chipset are supported:
	    82801AA
	    82801AB
	    82801BA
	    82801CA/CAM
	    82801DB
	    82801EB/ER (ICH5/ICH5R)
	    6300ESB
	    ICH6
	    ICH7
97
	    ESB2
98
	    ICH8
99
	    ICH9
100
	    EP80579 (Tolapai)
101
	    ICH10
102
	    5/3400 Series (PCH)
103
	    6 Series (PCH)
104
	    Patsburg (PCH)
105
	    DH89xxCC (PCH)
106
	    Panther Point (PCH)
107
	    Lynx Point (PCH)
108
	    Lynx Point-LP (PCH)
109
	    Avoton (SOC)
110
	    Wellsburg (PCH)
111
	    Coleto Creek (PCH)
L
Linus Torvalds 已提交
112 113 114 115

	  This driver can also be built as a module.  If so, the module
	  will be called i2c-i801.

A
Alek Du 已提交
116 117
config I2C_ISCH
	tristate "Intel SCH SMBus 1.0"
118
	depends on PCI && GENERIC_HARDIRQS
119
	select LPC_SCH
A
Alek Du 已提交
120 121 122 123 124 125 126
	help
	  Say Y here if you want to use SMBus controller on the Intel SCH
	  based systems.

	  This driver can also be built as a module. If so, the module
	  will be called i2c-isch.

127 128 129 130 131 132 133 134 135 136
config I2C_ISMT
	tristate "Intel iSMT SMBus Controller"
	depends on PCI && X86
	help
	  If you say yes to this option, support will be included for the Intel
	  iSMT SMBus host controller interface.

	  This driver can also be built as a module.  If so, the module will be
	  called i2c-ismt.

L
Linus Torvalds 已提交
137
config I2C_PIIX4
138
	tristate "Intel PIIX4 and compatible (ATI/AMD/Serverworks/Broadcom/SMSC)"
J
Jan Engelhardt 已提交
139
	depends on PCI
L
Linus Torvalds 已提交
140 141 142
	help
	  If you say yes to this option, support will be included for the Intel
	  PIIX4 family of mainboard I2C interfaces.  Specifically, the following
143 144
	  versions of the chipset are supported (note that Serverworks is part
	  of Broadcom):
L
Linus Torvalds 已提交
145 146
	    Intel PIIX4
	    Intel 440MX
147 148 149
	    ATI IXP200
	    ATI IXP300
	    ATI IXP400
150
	    ATI SB600
151
	    ATI SB700/SP5100
S
Shane Huang 已提交
152
	    ATI SB800
153
	    AMD Hudson-2
L
Linus Torvalds 已提交
154 155 156
	    Serverworks OSB4
	    Serverworks CSB5
	    Serverworks CSB6
157
	    Serverworks HT-1000
158
	    Serverworks HT-1100
L
Linus Torvalds 已提交
159 160
	    SMSC Victory66

161 162 163 164
	  Some AMD chipsets contain two PIIX4-compatible SMBus
	  controllers. This driver will attempt to use both controllers
	  on the SB700/SP5100, if they have been initialized by the BIOS.

L
Linus Torvalds 已提交
165 166 167 168
	  This driver can also be built as a module.  If so, the module
	  will be called i2c-piix4.

config I2C_NFORCE2
169
	tristate "Nvidia nForce2, nForce3 and nForce4"
J
Jan Engelhardt 已提交
170
	depends on PCI
L
Linus Torvalds 已提交
171 172
	help
	  If you say yes to this option, support will be included for the Nvidia
173
	  nForce2, nForce3 and nForce4 families of mainboard I2C interfaces.
L
Linus Torvalds 已提交
174 175 176 177

	  This driver can also be built as a module.  If so, the module
	  will be called i2c-nforce2.

178 179
config I2C_NFORCE2_S4985
	tristate "SMBus multiplexing on the Tyan S4985"
180
	depends on I2C_NFORCE2 && X86
181 182 183 184 185 186 187 188 189 190
	help
	  Enabling this option will add specific SMBus support for the Tyan
	  S4985 motherboard.  On this 4-CPU board, the SMBus is multiplexed
	  over 4 different channels, where the various memory module EEPROMs
	  live.  Saying yes here will give you access to these in addition
	  to the trunk.

	  This driver can also be built as a module.  If so, the module
	  will be called i2c-nforce2-s4985.

J
Jean Delvare 已提交
191 192 193
config I2C_SIS5595
	tristate "SiS 5595"
	depends on PCI
194 195
	help
	  If you say yes to this option, support will be included for the
J
Jean Delvare 已提交
196
	  SiS5595 SMBus (a subset of I2C) interface.
197 198

	  This driver can also be built as a module.  If so, the module
J
Jean Delvare 已提交
199
	  will be called i2c-sis5595.
200

J
Jean Delvare 已提交
201
config I2C_SIS630
202
	tristate "SiS 630/730/964"
J
Jean Delvare 已提交
203
	depends on PCI
204 205
	help
	  If you say yes to this option, support will be included for the
206
	  SiS630, SiS730 and SiS964 SMBus (a subset of I2C) interface.
207

J
Jean Delvare 已提交
208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230
	  This driver can also be built as a module.  If so, the module
	  will be called i2c-sis630.

config I2C_SIS96X
	tristate "SiS 96x"
	depends on PCI
	help
	  If you say yes to this option, support will be included for the SiS
	  96x SMBus (a subset of I2C) interfaces.  Specifically, the following
	  chipsets are supported:
	    645/961
	    645DX/961
	    645DX/962
	    648/961
	    650/961
	    735
	    745

	  This driver can also be built as a module.  If so, the module
	  will be called i2c-sis96x.

config I2C_VIA
	tristate "VIA VT82C586B"
231
	depends on PCI
L
Linus Torvalds 已提交
232 233
	select I2C_ALGOBIT
	help
J
Jean Delvare 已提交
234 235
	  If you say yes to this option, support will be included for the VIA
          82C586B I2C interface
L
Linus Torvalds 已提交
236

J
Jean Delvare 已提交
237 238
	  This driver can also be built as a module.  If so, the module
	  will be called i2c-via.
239

J
Jean Delvare 已提交
240
config I2C_VIAPRO
J
Jean Delvare 已提交
241
	tristate "VIA VT82C596/82C686/82xx and CX700/VX8xx/VX900"
J
Jean Delvare 已提交
242 243 244 245 246 247 248 249 250 251 252 253 254
	depends on PCI
	help
	  If you say yes to this option, support will be included for the VIA
	  VT82C596 and later SMBus interface.  Specifically, the following
	  chipsets are supported:
	    VT82C596A/B
	    VT82C686A/B
	    VT8231
	    VT8233/A
	    VT8235
	    VT8237R/A/S
	    VT8251
	    CX700
255 256
	    VX800/VX820
	    VX855/VX875
J
Jean Delvare 已提交
257
	    VX900
258

J
Jean Delvare 已提交
259 260
	  This driver can also be built as a module.  If so, the module
	  will be called i2c-viapro.
L
Linus Torvalds 已提交
261

262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277
if ACPI

comment "ACPI drivers"

config I2C_SCMI
	tristate "SMBus Control Method Interface"
	help
	  This driver supports the SMBus Control Method Interface. It needs the
	  BIOS to declare ACPI control methods as described in the SMBus Control
	  Method Interface specification.

	  To compile this driver as a module, choose M here:
	  the module will be called i2c-scmi.

endif # ACPI

J
Jean Delvare 已提交
278 279
comment "Mac SMBus host controller drivers"
	depends on PPC_CHRP || PPC_PMAC
L
Linus Torvalds 已提交
280

J
Jean Delvare 已提交
281 282
config I2C_HYDRA
	tristate "CHRP Apple Hydra Mac I/O I2C interface"
283
	depends on PCI && PPC_CHRP
L
Linus Torvalds 已提交
284 285
	select I2C_ALGOBIT
	help
J
Jean Delvare 已提交
286 287 288
	  This supports the use of the I2C interface in the Apple Hydra Mac
	  I/O chip on some CHRP machines (e.g. the LongTrail).  Say Y if you
	  have such a machine.
289

J
Jean Delvare 已提交
290 291 292 293 294 295 296 297 298 299 300
	  This support is also available as a module.  If so, the module
	  will be called i2c-hydra.

config I2C_POWERMAC
	tristate "Powermac I2C interface"
	depends on PPC_PMAC
	default y
	help
	  This exposes the various PowerMac i2c interfaces to the linux i2c
	  layer and to userland. It is used by various drivers on the PowerMac
	  platform, and should generally be enabled.
L
Linus Torvalds 已提交
301

302
	  This support is also available as a module.  If so, the module
J
Jean Delvare 已提交
303 304 305 306 307 308
	  will be called i2c-powermac.

comment "I2C system bus drivers (mostly embedded / system-on-chip)"

config I2C_AT91
	tristate "Atmel AT91 I2C Two-Wire interface (TWI)"
309
	depends on ARCH_AT91
J
Jean Delvare 已提交
310 311 312 313
	help
	  This supports the use of the I2C interface on Atmel AT91
	  processors.

N
Nikolaus Voss 已提交
314 315
	  A serious problem is that there is no documented way to issue
	  repeated START conditions for more than two messages, as needed
J
Jean Delvare 已提交
316
	  to support combined I2C messages.  Use the i2c-gpio driver
N
Nikolaus Voss 已提交
317 318 319 320 321 322 323
	  unless your system can cope with this limitation.

	  Caution! at91rm9200, at91sam9261, at91sam9260, at91sam9263 devices
	  don't have clock stretching in transmission mode. For that reason,
	  you can encounter underrun issues causing premature stop sendings if
	  the latency to fill the transmission register is too long. If you
	  are facing this situation, use the i2c-gpio driver.
J
Jean Delvare 已提交
324 325

config I2C_AU1550
M
Manuel Lauss 已提交
326
	tristate "Au1550/Au1200/Au1300 SMBus interface"
327
	depends on MIPS_ALCHEMY
J
Jean Delvare 已提交
328 329
	help
	  If you say yes to this option, support will be included for the
M
Manuel Lauss 已提交
330
	  Au1550/Au1200/Au1300 SMBus interface.
J
Jean Delvare 已提交
331 332 333 334

	  This driver can also be built as a module.  If so, the module
	  will be called i2c-au1550.

S
Stephen Warren 已提交
335 336 337 338 339 340 341 342 343 344 345 346
config I2C_BCM2835
	tristate "Broadcom BCM2835 I2C controller"
	depends on ARCH_BCM2835
	help
	  If you say yes to this option, support will be included for the
	  BCM2835 I2C controller.

	  If you don't know what to do here, say N.

	  This support is also available as a module.  If so, the module
	  will be called i2c-bcm2835.

J
Jean Delvare 已提交
347 348 349 350 351 352 353 354 355 356 357 358 359
config I2C_BLACKFIN_TWI
	tristate "Blackfin TWI I2C support"
	depends on BLACKFIN
	depends on !BF561 && !BF531 && !BF532 && !BF533
	help
	  This is the I2C bus driver for Blackfin on-chip TWI interface.

	  This driver can also be built as a module.  If so, the module
	  will be called i2c-bfin-twi.

config I2C_BLACKFIN_TWI_CLK_KHZ
	int "Blackfin TWI I2C clock (kHz)"
	depends on I2C_BLACKFIN_TWI
360
	range 21 400
J
Jean Delvare 已提交
361 362 363 364
	default 50
	help
	  The unit of the TWI clock is kHz.

365 366
config I2C_CBUS_GPIO
	tristate "CBUS I2C driver"
367
	depends on GPIOLIB
368 369 370 371 372 373 374
	help
	  Support for CBUS access using I2C API. Mostly relevant for Nokia
	  Internet Tablets (770, N800 and N810).

	  This driver can also be built as a module.  If so, the module
	  will be called i2c-cbus-gpio.

375 376 377 378 379 380 381 382 383 384
config I2C_CPM
	tristate "Freescale CPM1 or CPM2 (MPC8xx/826x)"
	depends on (CPM1 || CPM2) && OF_I2C
	help
	  This supports the use of the I2C interface on Freescale
	  processors with CPM1 or CPM2.

	  This driver can also be built as a module.  If so, the module
	  will be called i2c-cpm.

J
Jean Delvare 已提交
385 386 387 388 389 390 391 392 393 394 395 396 397
config I2C_DAVINCI
	tristate "DaVinci I2C driver"
	depends on ARCH_DAVINCI
	help
	  Support for TI DaVinci I2C controller driver.

	  This driver can also be built as a module.  If so, the module
	  will be called i2c-davinci.

	  Please note that this driver might be needed to bring up other
	  devices such as DaVinci NIC.
	  For details please see http://www.ti.com/davinci

398 399 400
config I2C_DESIGNWARE_CORE
	tristate

401
config I2C_DESIGNWARE_PLATFORM
M
Masanari Iida 已提交
402
	tristate "Synopsys DesignWare Platform"
403
	depends on HAVE_CLK
404
	select I2C_DESIGNWARE_CORE
405 406 407 408 409
	help
	  If you say yes to this option, support will be included for the
	  Synopsys DesignWare I2C adapter. Only master mode is supported.

	  This driver can also be built as a module.  If so, the module
410
	  will be called i2c-designware-platform.
411

412 413 414
config I2C_DESIGNWARE_PCI
	tristate "Synopsys DesignWare PCI"
	depends on PCI
415
	select I2C_DESIGNWARE_CORE
416 417 418 419 420 421
	help
	  If you say yes to this option, support will be included for the
	  Synopsys DesignWare I2C adapter. Only master mode is supported.

	  This driver can also be built as a module.  If so, the module
	  will be called i2c-designware-pci.
422

423 424 425 426 427 428 429 430 431 432 433 434 435 436 437
config I2C_EG20T
	tristate "Intel EG20T PCH/LAPIS Semicon IOH(ML7213/ML7223/ML7831) I2C"
	depends on PCI
	help
	  This driver is for PCH(Platform controller Hub) I2C of EG20T which
	  is an IOH(Input/Output Hub) for x86 embedded processor.
	  This driver can access PCH I2C bus device.

	  This driver also can be used for LAPIS Semiconductor IOH(Input/
	  Output Hub), ML7213, ML7223 and ML7831.
	  ML7213 IOH is for IVI(In-Vehicle Infotainment) use, ML7223 IOH is
	  for MP(Media Phone) use and ML7831 IOH is for general purpose use.
	  ML7213/ML7223/ML7831 is companion chip for Intel Atom E6xx series.
	  ML7213/ML7223/ML7831 is completely compatible for Intel EG20T PCH.

J
Jean Delvare 已提交
438 439
config I2C_GPIO
	tristate "GPIO-based bitbanging I2C"
440
	depends on GPIOLIB
J
Jean Delvare 已提交
441 442 443 444 445
	select I2C_ALGOBIT
	help
	  This is a very simple bitbanging I2C driver utilizing the
	  arch-neutral GPIO API to control the SCL and SDA lines.

446 447 448 449 450 451 452 453 454 455 456 457
config I2C_HIGHLANDER
	tristate "Highlander FPGA SMBus interface"
	depends on SH_HIGHLANDER
	help
	  If you say yes to this option, support will be included for
	  the SMBus interface located in the FPGA on various Highlander
	  boards, particularly the R0P7780LC0011RL and R0P7785LC0011RL
	  FPGAs. This is wholly unrelated to the SoC I2C.

	  This driver can also be built as a module.  If so, the module
	  will be called i2c-highlander.

J
Jean Delvare 已提交
458 459 460 461 462 463 464 465 466 467
config I2C_IBM_IIC
	tristate "IBM PPC 4xx on-chip I2C interface"
	depends on 4xx
	help
	  Say Y here if you want to use IIC peripheral found on
	  embedded IBM PPC 4xx based systems.

	  This driver can also be built as a module.  If so, the module
	  will be called i2c-ibm_iic.

D
Darius Augulis 已提交
468 469 470 471 472 473 474 475 476 477
config I2C_IMX
	tristate "IMX I2C interface"
	depends on ARCH_MXC
	help
	  Say Y here if you want to use the IIC bus controller on
	  the Freescale i.MX/MXC processors.

	  This driver can also be built as a module.  If so, the module
	  will be called i2c-imx.

J
Jean Delvare 已提交
478 479 480 481 482 483 484 485 486 487 488
config I2C_IOP3XX
	tristate "Intel IOPx3xx and IXP4xx on-chip I2C interface"
	depends on ARCH_IOP32X || ARCH_IOP33X || ARCH_IXP4XX || ARCH_IOP13XX
	help
	  Say Y here if you want to use the IIC bus controller on
	  the Intel IOPx3xx I/O Processors or IXP4xx Network Processors.

	  This driver can also be built as a module.  If so, the module
	  will be called i2c-iop3xx.

config I2C_MPC
489
	tristate "MPC107/824x/85xx/512x/52xx/83xx/86xx"
490
	depends on PPC
J
Jean Delvare 已提交
491 492
	help
	  If you say yes to this option, support will be included for the
493 494
	  built-in I2C interface on the MPC107, Tsi107, MPC512x, MPC52xx,
	  MPC8240, MPC8245, MPC83xx, MPC85xx and MPC8641 family processors.
J
Jean Delvare 已提交
495 496 497 498 499 500

	  This driver can also be built as a module.  If so, the module
	  will be called i2c-mpc.

config I2C_MV64XXX
	tristate "Marvell mv64xxx I2C Controller"
501
	depends on (MV64X60 || PLAT_ORION || ARCH_SUNXI)
J
Jean Delvare 已提交
502 503 504
	help
	  If you say yes to this option, support will be included for the
	  built-in I2C interface on the Marvell 64xxx line of host bridges.
505
	  This driver is also used for Allwinner SoCs I2C controllers.
J
Jean Delvare 已提交
506 507 508 509

	  This driver can also be built as a module.  If so, the module
	  will be called i2c-mv64xxx.

510 511 512
config I2C_MXS
	tristate "Freescale i.MX28 I2C interface"
	depends on SOC_IMX28
513
	select STMP_DEVICE
514 515 516 517 518 519 520
	help
	  Say Y here if you want to use the I2C bus controller on
	  the Freescale i.MX28 processors.

	  This driver can also be built as a module.  If so, the module
	  will be called i2c-mxs.

521 522
config I2C_NOMADIK
	tristate "ST-Ericsson Nomadik/Ux500 I2C Controller"
523
	depends on ARM_AMBA
524 525
	help
	  If you say yes to this option, support will be included for the
526 527
	  I2C interface from ST-Ericsson's Nomadik and Ux500 architectures,
	  as well as the STA2X11 PCIe I/O HUB.
528

529 530 531 532 533 534 535
config I2C_NUC900
	tristate "NUC900 I2C Driver"
	depends on ARCH_W90X900
	help
	  Say Y here to include support for I2C controller in the
	  Winbond/Nuvoton NUC900 based System-on-Chip devices.

J
Jean Delvare 已提交
536 537
config I2C_OCORES
	tristate "OpenCores I2C Controller"
538
	depends on GENERIC_HARDIRQS
J
Jean Delvare 已提交
539 540 541 542 543 544 545 546 547 548 549 550 551 552 553 554 555
	help
	  If you say yes to this option, support will be included for the
	  OpenCores I2C controller. For details see
	  http://www.opencores.org/projects.cgi/web/i2c/overview

	  This driver can also be built as a module.  If so, the module
	  will be called i2c-ocores.

config I2C_OMAP
	tristate "OMAP I2C adapter"
	depends on ARCH_OMAP
	default y if MACH_OMAP_H3 || MACH_OMAP_OSK
	help
	  If you say yes to this option, support will be included for the
	  I2C interface on the Texas Instruments OMAP1/2 family of processors.
	  Like OMAP1510/1610/1710/5912 and OMAP242x.
	  For details see http://www.ti.com/omap.
L
Linus Torvalds 已提交
556

O
Olof Johansson 已提交
557 558
config I2C_PASEMI
	tristate "PA Semi SMBus interface"
J
Jan Engelhardt 已提交
559
	depends on PPC_PASEMI && PCI
O
Olof Johansson 已提交
560 561 562
	help
	  Supports the PA Semi PWRficient on-chip SMBus interfaces.

563 564 565 566 567 568 569 570 571 572 573 574 575 576 577 578 579 580 581 582
config I2C_PCA_PLATFORM
	tristate "PCA9564/PCA9665 as platform device"
	select I2C_ALGOPCA
	default n
	help
	  This driver supports a memory mapped Philips PCA9564/PCA9665
	  parallel bus to I2C bus controller.

	  This driver can also be built as a module.  If so, the module
	  will be called i2c-pca-platform.

config I2C_PMCMSP
	tristate "PMC MSP I2C TWI Controller"
	depends on PMC_MSP
	help
	  This driver supports the PMC TWI controller on MSP devices.

	  This driver can also be built as module. If so, the module
	  will be called i2c-pmcmsp.

J
Jean Delvare 已提交
583
config I2C_PNX
584
	tristate "I2C bus support for Philips PNX and NXP LPC targets"
585
	depends on ARCH_LPC32XX
J
Jean Delvare 已提交
586 587 588 589 590 591 592
	help
	  This driver supports the Philips IP3204 I2C IP block master and/or
	  slave controller

	  This driver can also be built as a module.  If so, the module
	  will be called i2c-pnx.

593 594 595 596 597 598 599 600 601 602 603
config I2C_PUV3
	tristate "PKUnity v3 I2C bus support"
	depends on UNICORE32 && ARCH_PUV3
	select I2C_ALGOBIT
	help
	  This driver supports the I2C IP inside the PKUnity-v3 SoC.
	  This I2C bus controller is under AMBA/AXI bus.

	  This driver can also be built as a module.  If so, the module
	  will be called i2c-puv3.

J
Jean Delvare 已提交
604
config I2C_PXA
605
	tristate "Intel PXA2XX I2C adapter"
606
	depends on ARCH_PXA || ARCH_MMP || (X86_32 && PCI && OF)
J
Jean Delvare 已提交
607 608 609 610 611
	help
	  If you have devices in the PXA I2C bus, say yes to this option.
	  This driver can also be built as a module.  If so, the module
	  will be called i2c-pxa.

612 613 614
config I2C_PXA_PCI
	def_bool I2C_PXA && X86_32 && PCI && OF

J
Jean Delvare 已提交
615 616
config I2C_PXA_SLAVE
	bool "Intel PXA2XX I2C Slave comms support"
617
	depends on I2C_PXA && !X86_32
J
Jean Delvare 已提交
618 619 620 621 622
	help
	  Support I2C slave mode communications on the PXA I2C bus.  This
	  is necessary for systems where the PXA may be a target on the
	  I2C bus.

623 624 625 626 627 628 629
config HAVE_S3C2410_I2C
	bool
	help
	  This will include I2C support for Samsung SoCs. If you want to
	  include I2C support for any machine, kindly select this in the
	  respective Kconfig file.

L
Linus Torvalds 已提交
630 631
config I2C_S3C2410
	tristate "S3C2410 I2C Driver"
632
	depends on HAVE_S3C2410_I2C
L
Linus Torvalds 已提交
633 634
	help
	  Say Y here to include support for I2C controller in the
635
	  Samsung SoCs.
L
Linus Torvalds 已提交
636

O
Oskar Schirmer 已提交
637 638 639 640 641 642 643 644 645 646
config I2C_S6000
	tristate "S6000 I2C support"
	depends on XTENSA_VARIANT_S6000
	help
	  This driver supports the on chip I2C device on the
	  S6000 xtensa processor family.

	  To compile this driver as a module, choose M here. The module
	  will be called i2c-s6000.

J
Jean Delvare 已提交
647 648 649
config I2C_SH7760
	tristate "Renesas SH7760 I2C Controller"
	depends on CPU_SUBTYPE_SH7760
L
Linus Torvalds 已提交
650
	help
J
Jean Delvare 已提交
651 652 653 654 655 656 657
	  This driver supports the 2 I2C interfaces on the Renesas SH7760.

	  This driver can also be built as a module.  If so, the module
	  will be called i2c-sh7760.

config I2C_SH_MOBILE
	tristate "SuperH Mobile I2C Controller"
658
	depends on SUPERH || ARCH_SHMOBILE
J
Jean Delvare 已提交
659 660 661 662 663 664
	help
	  If you say yes to this option, support will be included for the
	  built-in I2C interface on the Renesas SH-Mobile processor.

	  This driver can also be built as a module.  If so, the module
	  will be called i2c-sh_mobile.
L
Linus Torvalds 已提交
665

B
Ben Dooks 已提交
666 667 668 669
config I2C_SIMTEC
	tristate "Simtec Generic I2C interface"
	select I2C_ALGOBIT
	help
M
Matt LaPlante 已提交
670
	  If you say yes to this option, support will be included for
B
Ben Dooks 已提交
671 672 673 674
	  the Simtec Generic I2C interface. This driver is for the
	  simple I2C bus used on newer Simtec products for general
	  I2C, such as DDC on the Simtec BBD2016A.

M
Matt LaPlante 已提交
675
	  This driver can also be built as a module. If so, the module
B
Ben Dooks 已提交
676 677
	  will be called i2c-simtec.

678 679 680 681 682 683 684 685 686 687
config I2C_SIRF
	tristate "CSR SiRFprimaII I2C interface"
	depends on ARCH_PRIMA2
	help
	  If you say yes to this option, support will be included for the
	  CSR SiRFprimaII I2C interface.

	  This driver can also be built as a module.  If so, the module
	  will be called i2c-sirf.

688 689
config I2C_STU300
	tristate "ST Microelectronics DDC I2C interface"
690
	depends on MACH_U300
691 692 693 694 695 696 697 698 699 700
	default y if MACH_U300
	help
	  If you say yes to this option, support will be included for the
	  I2C interface from ST Microelectronics simply called "DDC I2C"
	  supporting both I2C and DDC, used in e.g. the U300 series
	  mobile platforms.

	  This driver can also be built as a module. If so, the module
	  will be called i2c-stu300.

C
Colin Cross 已提交
701 702 703 704 705 706 707
config I2C_TEGRA
	tristate "NVIDIA Tegra internal I2C controller"
	depends on ARCH_TEGRA
	help
	  If you say yes to this option, support will be included for the
	  I2C controller embedded in NVIDIA Tegra SOCs

J
Jean Delvare 已提交
708 709
config I2C_VERSATILE
	tristate "ARM Versatile/Realview I2C bus support"
710
	depends on ARCH_VERSATILE || ARCH_REALVIEW || ARCH_VEXPRESS
L
Linus Torvalds 已提交
711 712
	select I2C_ALGOBIT
	help
J
Jean Delvare 已提交
713 714
	  Say yes if you want to support the I2C serial bus on ARMs Versatile
	  range of platforms.
L
Linus Torvalds 已提交
715

J
Jean Delvare 已提交
716 717
	  This driver can also be built as a module.  If so, the module
	  will be called i2c-versatile.
L
Linus Torvalds 已提交
718

719 720 721 722 723 724 725 726 727 728
config I2C_WMT
	tristate "Wondermedia WM8xxx SoC I2C bus support"
	depends on ARCH_VT8500
	help
	  Say yes if you want to support the I2C bus on Wondermedia 8xxx-series
	  SoCs.

	  This driver can also be built as a module. If so, the module will be
	  called i2c-wmt.

729 730 731 732 733 734 735 736 737 738
config I2C_OCTEON
	tristate "Cavium OCTEON I2C bus support"
	depends on CPU_CAVIUM_OCTEON
	help
	  Say yes if you want to support the I2C serial bus on Cavium
	  OCTEON SOC.

	  This driver can also be built as a module.  If so, the module
	  will be called i2c-octeon.

739 740
config I2C_XILINX
	tristate "Xilinx I2C Controller"
741
	depends on HAS_IOMEM
742 743 744 745 746 747 748
	help
	  If you say yes to this option, support will be included for the
	  Xilinx I2C controller.

	  This driver can also be built as a module.  If so, the module
	  will be called xilinx_i2c.

749 750 751 752 753 754 755 756 757 758
config I2C_XLR
	tristate "XLR I2C support"
	depends on CPU_XLR
	help
	  This driver enables support for the on-chip I2C interface of
	  the Netlogic XLR/XLS MIPS processors.

	  This driver can also be built as a module.  If so, the module
	  will be called i2c-xlr.

759 760 761 762 763 764 765 766 767 768
config I2C_RCAR
	tristate "Renesas R-Car I2C Controller"
	depends on ARCH_SHMOBILE && I2C
	help
	  If you say yes to this option, support will be included for the
	  R-Car I2C controller.

	  This driver can also be built as a module.  If so, the module
	  will be called i2c-rcar.

J
Jean Delvare 已提交
769
comment "External I2C/SMBus adapter drivers"
770

771 772 773 774 775 776 777 778 779 780
config I2C_DIOLAN_U2C
	tristate "Diolan U2C-12 USB adapter"
	depends on USB
	help
	  If you say yes to this option, support will be included for Diolan
	  U2C-12, a USB to I2C interface.

	  This driver can also be built as a module.  If so, the module
	  will be called i2c-diolan-u2c.

J
Jean Delvare 已提交
781 782
config I2C_PARPORT
	tristate "Parallel port adapter"
783
	depends on PARPORT && GENERIC_HARDIRQS
J
Jean Delvare 已提交
784
	select I2C_ALGOBIT
785
	select I2C_SMBUS
L
Linus Torvalds 已提交
786
	help
J
Jean Delvare 已提交
787 788 789 790
	  This supports parallel port I2C adapters such as the ones made by
	  Philips or Velleman, Analog Devices evaluation boards, and more.
	  Basically any adapter using the parallel port as an I2C bus with
	  no extra chipset is supported by this driver, or could be.
L
Linus Torvalds 已提交
791

J
Jean Delvare 已提交
792 793 794
	  This driver is a replacement for (and was inspired by) an older
	  driver named i2c-philips-par.  The new driver supports more devices,
	  and makes it easier to add support for new devices.
L
Linus Torvalds 已提交
795

J
Jean Delvare 已提交
796 797
	  An adapter type parameter is now mandatory.  Please read the file
	  Documentation/i2c/busses/i2c-parport for details.
L
Linus Torvalds 已提交
798

J
Jean Delvare 已提交
799 800 801
	  Another driver exists, named i2c-parport-light, which doesn't depend
	  on the parport driver.  This is meant for embedded systems. Don't say
	  Y here if you intend to say Y or M there.
L
Linus Torvalds 已提交
802

803
	  This support is also available as a module.  If so, the module
J
Jean Delvare 已提交
804
	  will be called i2c-parport.
L
Linus Torvalds 已提交
805

J
Jean Delvare 已提交
806 807
config I2C_PARPORT_LIGHT
	tristate "Parallel port adapter (light)"
808
	depends on GENERIC_HARDIRQS
J
Jean Delvare 已提交
809
	select I2C_ALGOBIT
810
	select I2C_SMBUS
L
Linus Torvalds 已提交
811
	help
J
Jean Delvare 已提交
812 813 814 815
	  This supports parallel port I2C adapters such as the ones made by
	  Philips or Velleman, Analog Devices evaluation boards, and more.
	  Basically any adapter using the parallel port as an I2C bus with
	  no extra chipset is supported by this driver, or could be.
L
Linus Torvalds 已提交
816

J
Jean Delvare 已提交
817 818 819 820 821 822
	  This driver is a light version of i2c-parport.  It doesn't depend
	  on the parport driver, and uses direct I/O access instead.  This
	  might be preferred on embedded systems where wasting memory for
	  the clean but heavy parport handling is not an option.  The
	  drawback is a reduced portability and the impossibility to
	  daisy-chain other parallel port devices.
L
Linus Torvalds 已提交
823

J
Jean Delvare 已提交
824 825 826
	  Don't say Y here if you said Y or M to i2c-parport.  Saying M to
	  both is possible but both modules should not be loaded at the same
	  time.
L
Linus Torvalds 已提交
827

J
Jean Delvare 已提交
828 829
	  This support is also available as a module.  If so, the module
	  will be called i2c-parport-light.
L
Linus Torvalds 已提交
830

831 832
config I2C_TAOS_EVM
	tristate "TAOS evaluation module"
833
	depends on TTY
834 835 836 837 838 839 840 841 842 843 844 845 846
	select SERIO
	select SERIO_SERPORT
	default n
	help
	  This supports TAOS evaluation modules on serial port. In order to
	  use this driver, you will need the inputattach tool, which is part
	  of the input-utils package.

	  If unsure, say N.

	  This support is also available as a module.  If so, the module
	  will be called i2c-taos-evm.

T
Till Harbaum 已提交
847
config I2C_TINY_USB
J
Jean Delvare 已提交
848
	tristate "Tiny-USB adapter"
T
Till Harbaum 已提交
849 850 851 852 853 854 855 856 857
	depends on USB
	help
	  If you say yes to this option, support will be included for the
	  i2c-tiny-usb, a simple do-it-yourself USB to I2C interface. See
	  http://www.harbaum.org/till/i2c_tiny_usb for hardware details.

	  This driver can also be built as a module.  If so, the module
	  will be called i2c-tiny-usb.

858 859 860 861 862 863 864 865 866 867
config I2C_VIPERBOARD
	tristate "Viperboard I2C master support"
	depends on MFD_VIPERBOARD && USB
	help
	  Say yes here to access the I2C part of the Nano River
	  Technologies Viperboard as I2C master.
          See viperboard API specification and Nano
          River Tech's viperboard.h for detailed meaning
          of the module parameters.

J
Jean Delvare 已提交
868
comment "Other I2C/SMBus bus drivers"
869

870
config I2C_ACORN
A
Al Viro 已提交
871
	tristate "Acorn IOC/IOMD I2C bus support"
J
Jan Engelhardt 已提交
872
	depends on ARCH_ACORN
873 874 875 876 877 878 879
	default y
	select I2C_ALGOBIT
	help
	  Say yes if you want to support the I2C bus on Acorn platforms.

	  If you don't know, say Y.

J
Jean Delvare 已提交
880 881
config I2C_ELEKTOR
	tristate "Elektor ISA card"
882
	depends on ISA && HAS_IOPORT && BROKEN_ON_SMP
J
Jean Delvare 已提交
883
	select I2C_ALGOPCF
L
Linus Torvalds 已提交
884
	help
J
Jean Delvare 已提交
885 886
	  This supports the PCF8584 ISA bus I2C adapter.  Say Y if you own
	  such an adapter.
L
Linus Torvalds 已提交
887

J
Jean Delvare 已提交
888 889
	  This support is also available as a module.  If so, the module
	  will be called i2c-elektor.
L
Linus Torvalds 已提交
890 891

config I2C_PCA_ISA
892
	tristate "PCA9564/PCA9665 on an ISA bus"
J
Jan Engelhardt 已提交
893
	depends on ISA
L
Linus Torvalds 已提交
894
	select I2C_ALGOPCA
895
	default n
L
Linus Torvalds 已提交
896
	help
897
	  This driver supports ISA boards using the Philips PCA9564/PCA9665
898
	  parallel bus to I2C bus controller.
899

L
Linus Torvalds 已提交
900 901 902
	  This driver can also be built as a module.  If so, the module
	  will be called i2c-pca-isa.

903 904 905 906 907
	  This device is almost undetectable and using this driver on a
	  system which doesn't have this device will result in long
	  delays when I2C/SMBus chip drivers are loaded (e.g. at boot
	  time).  If unsure, say N.

J
Jean Delvare 已提交
908 909 910
config I2C_SIBYTE
	tristate "SiByte SMBus interface"
	depends on SIBYTE_SB1xxx_SOC
911
	help
J
Jean Delvare 已提交
912
	  Supports the SiByte SOC on-chip I2C interfaces (2 channels).
913

J
Jean Delvare 已提交
914 915 916 917
config SCx200_I2C
	tristate "NatSemi SCx200 I2C using GPIO pins (DEPRECATED)"
	depends on SCx200_GPIO
	select I2C_ALGOBIT
918
	help
J
Jean Delvare 已提交
919
	  Enable the use of two GPIO pins of a SCx200 processor as an I2C bus.
920

J
Jean Delvare 已提交
921 922 923 924 925 926 927 928 929 930 931 932 933 934 935 936 937 938 939 940 941 942 943 944 945 946 947 948 949 950 951 952 953 954 955
	  If you don't know what to do here, say N.

	  This support is also available as a module.  If so, the module
	  will be called scx200_i2c.

	  This driver is deprecated and will be dropped soon. Use i2c-gpio
	  (or scx200_acb) instead.

config SCx200_I2C_SCL
	int "GPIO pin used for SCL"
	depends on SCx200_I2C
	default "12"
	help
	  Enter the GPIO pin number used for the SCL signal.  This value can
	  also be specified with a module parameter.

config SCx200_I2C_SDA
	int "GPIO pin used for SDA"
	depends on SCx200_I2C
	default "13"
	help
	  Enter the GPIO pin number used for the SSA signal.  This value can
	  also be specified with a module parameter.

config SCx200_ACB
	tristate "Geode ACCESS.bus support"
	depends on X86_32 && PCI
	help
	  Enable the use of the ACCESS.bus controllers on the Geode SCx200 and
	  SC1100 processors and the CS5535 and CS5536 Geode companion devices.

	  If you don't know what to do here, say N.

	  This support is also available as a module.  If so, the module
	  will be called scx200_acb.
956

L
Linus Torvalds 已提交
957
endmenu