Kconfig 20.3 KB
Newer Older
L
Linus Torvalds 已提交
1 2 3 4 5 6
#
# Sensor device configuration
#

menu "I2C Hardware Bus support"

J
Jean Delvare 已提交
7 8 9
comment "PC SMBus host controller drivers"
	depends on PCI

L
Linus Torvalds 已提交
10 11
config I2C_ALI1535
	tristate "ALI 1535"
J
Jan Engelhardt 已提交
12
	depends on PCI
L
Linus Torvalds 已提交
13 14 15 16 17 18 19 20 21 22 23
	help
	  If you say yes to this option, support will be included for the SMB
	  Host controller on Acer Labs Inc. (ALI) M1535 South Bridges.  The SMB
	  controller is part of the 7101 device, which is an ACPI-compliant
	  Power Management Unit (PMU).

	  This driver can also be built as a module.  If so, the module
	  will be called i2c-ali1535.

config I2C_ALI1563
	tristate "ALI 1563"
J
Jan Engelhardt 已提交
24
	depends on PCI && EXPERIMENTAL
L
Linus Torvalds 已提交
25 26 27 28 29 30 31 32 33 34 35
	help
	  If you say yes to this option, support will be included for the SMB
	  Host controller on Acer Labs Inc. (ALI) M1563 South Bridges.  The SMB
	  controller is part of the 7101 device, which is an ACPI-compliant
	  Power Management Unit (PMU).

	  This driver can also be built as a module.  If so, the module
	  will be called i2c-ali1563.

config I2C_ALI15X3
	tristate "ALI 15x3"
J
Jan Engelhardt 已提交
36
	depends on PCI
L
Linus Torvalds 已提交
37 38 39 40 41 42 43 44 45
	help
	  If you say yes to this option, support will be included for the
	  Acer Labs Inc. (ALI) M1514 and M1543 motherboard I2C interfaces.

	  This driver can also be built as a module.  If so, the module
	  will be called i2c-ali15x3.

config I2C_AMD756
	tristate "AMD 756/766/768/8111 and nVidia nForce"
J
Jan Engelhardt 已提交
46
	depends on PCI
L
Linus Torvalds 已提交
47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70
	help
	  If you say yes to this option, support will be included for the AMD
	  756/766/768 mainboard I2C interfaces.  The driver also includes
	  support for the first (SMBus 1.0) I2C interface of the AMD 8111 and
	  the nVidia nForce I2C interface.

	  This driver can also be built as a module.  If so, the module
	  will be called i2c-amd756.

config I2C_AMD756_S4882
	tristate "SMBus multiplexing on the Tyan S4882"
	depends on I2C_AMD756 && EXPERIMENTAL
	help
	  Enabling this option will add specific SMBus support for the Tyan
	  S4882 motherboard.  On this 4-CPU board, the SMBus is multiplexed
	  over 8 different channels, where the various memory module EEPROMs
	  and temperature sensors live.  Saying yes here will give you access
	  to these in addition to the trunk.

	  This driver can also be built as a module.  If so, the module
	  will be called i2c-amd756-s4882.

config I2C_AMD8111
	tristate "AMD 8111"
J
Jan Engelhardt 已提交
71
	depends on PCI
L
Linus Torvalds 已提交
72 73 74 75 76 77 78 79 80
	help
	  If you say yes to this option, support will be included for the
	  second (SMBus 2.0) AMD 8111 mainboard I2C interface.

	  This driver can also be built as a module.  If so, the module
	  will be called i2c-amd8111.

config I2C_I801
	tristate "Intel 82801 (ICH)"
J
Jan Engelhardt 已提交
81
	depends on PCI
L
Linus Torvalds 已提交
82 83 84 85 86 87 88 89 90 91 92 93 94
	help
	  If you say yes to this option, support will be included for the Intel
	  801 family of mainboard I2C interfaces.  Specifically, the following
	  versions of the chipset are supported:
	    82801AA
	    82801AB
	    82801BA
	    82801CA/CAM
	    82801DB
	    82801EB/ER (ICH5/ICH5R)
	    6300ESB
	    ICH6
	    ICH7
95
	    ESB2
96
	    ICH8
97
	    ICH9
98 99
	    Tolapai
	    ICH10
L
Linus Torvalds 已提交
100 101 102 103 104

	  This driver can also be built as a module.  If so, the module
	  will be called i2c-i801.

config I2C_PIIX4
105
	tristate "Intel PIIX4 and compatible (ATI/Serverworks/Broadcom/SMSC)"
J
Jan Engelhardt 已提交
106
	depends on PCI
L
Linus Torvalds 已提交
107 108 109
	help
	  If you say yes to this option, support will be included for the Intel
	  PIIX4 family of mainboard I2C interfaces.  Specifically, the following
110 111
	  versions of the chipset are supported (note that Serverworks is part
	  of Broadcom):
L
Linus Torvalds 已提交
112 113
	    Intel PIIX4
	    Intel 440MX
114 115 116
	    ATI IXP200
	    ATI IXP300
	    ATI IXP400
117
	    ATI SB600
118
	    ATI SB700
S
Shane Huang 已提交
119
	    ATI SB800
L
Linus Torvalds 已提交
120 121 122
	    Serverworks OSB4
	    Serverworks CSB5
	    Serverworks CSB6
123
	    Serverworks HT-1000
L
Linus Torvalds 已提交
124 125 126 127 128 129
	    SMSC Victory66

	  This driver can also be built as a module.  If so, the module
	  will be called i2c-piix4.

config I2C_NFORCE2
130
	tristate "Nvidia nForce2, nForce3 and nForce4"
J
Jan Engelhardt 已提交
131
	depends on PCI
L
Linus Torvalds 已提交
132 133
	help
	  If you say yes to this option, support will be included for the Nvidia
134
	  nForce2, nForce3 and nForce4 families of mainboard I2C interfaces.
L
Linus Torvalds 已提交
135 136 137 138

	  This driver can also be built as a module.  If so, the module
	  will be called i2c-nforce2.

139 140 141 142 143 144 145 146 147 148 149 150 151
config I2C_NFORCE2_S4985
	tristate "SMBus multiplexing on the Tyan S4985"
	depends on I2C_NFORCE2 && EXPERIMENTAL
	help
	  Enabling this option will add specific SMBus support for the Tyan
	  S4985 motherboard.  On this 4-CPU board, the SMBus is multiplexed
	  over 4 different channels, where the various memory module EEPROMs
	  live.  Saying yes here will give you access to these in addition
	  to the trunk.

	  This driver can also be built as a module.  If so, the module
	  will be called i2c-nforce2-s4985.

J
Jean Delvare 已提交
152 153 154
config I2C_SIS5595
	tristate "SiS 5595"
	depends on PCI
155 156
	help
	  If you say yes to this option, support will be included for the
J
Jean Delvare 已提交
157
	  SiS5595 SMBus (a subset of I2C) interface.
158 159

	  This driver can also be built as a module.  If so, the module
J
Jean Delvare 已提交
160
	  will be called i2c-sis5595.
161

J
Jean Delvare 已提交
162 163 164
config I2C_SIS630
	tristate "SiS 630/730"
	depends on PCI
165 166
	help
	  If you say yes to this option, support will be included for the
J
Jean Delvare 已提交
167
	  SiS630 and SiS730 SMBus (a subset of I2C) interface.
168

J
Jean Delvare 已提交
169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192
	  This driver can also be built as a module.  If so, the module
	  will be called i2c-sis630.

config I2C_SIS96X
	tristate "SiS 96x"
	depends on PCI
	help
	  If you say yes to this option, support will be included for the SiS
	  96x SMBus (a subset of I2C) interfaces.  Specifically, the following
	  chipsets are supported:
	    645/961
	    645DX/961
	    645DX/962
	    648/961
	    650/961
	    735
	    745

	  This driver can also be built as a module.  If so, the module
	  will be called i2c-sis96x.

config I2C_VIA
	tristate "VIA VT82C586B"
	depends on PCI && EXPERIMENTAL
L
Linus Torvalds 已提交
193 194
	select I2C_ALGOBIT
	help
J
Jean Delvare 已提交
195 196
	  If you say yes to this option, support will be included for the VIA
          82C586B I2C interface
L
Linus Torvalds 已提交
197

J
Jean Delvare 已提交
198 199
	  This driver can also be built as a module.  If so, the module
	  will be called i2c-via.
200

J
Jean Delvare 已提交
201 202 203 204 205 206 207 208 209 210 211 212 213 214 215
config I2C_VIAPRO
	tristate "VIA VT82C596/82C686/82xx and CX700"
	depends on PCI
	help
	  If you say yes to this option, support will be included for the VIA
	  VT82C596 and later SMBus interface.  Specifically, the following
	  chipsets are supported:
	    VT82C596A/B
	    VT82C686A/B
	    VT8231
	    VT8233/A
	    VT8235
	    VT8237R/A/S
	    VT8251
	    CX700
216

J
Jean Delvare 已提交
217 218
	  This driver can also be built as a module.  If so, the module
	  will be called i2c-viapro.
L
Linus Torvalds 已提交
219

J
Jean Delvare 已提交
220 221
comment "Mac SMBus host controller drivers"
	depends on PPC_CHRP || PPC_PMAC
L
Linus Torvalds 已提交
222

J
Jean Delvare 已提交
223 224 225
config I2C_HYDRA
	tristate "CHRP Apple Hydra Mac I/O I2C interface"
	depends on PCI && PPC_CHRP && EXPERIMENTAL
L
Linus Torvalds 已提交
226 227
	select I2C_ALGOBIT
	help
J
Jean Delvare 已提交
228 229 230
	  This supports the use of the I2C interface in the Apple Hydra Mac
	  I/O chip on some CHRP machines (e.g. the LongTrail).  Say Y if you
	  have such a machine.
231

J
Jean Delvare 已提交
232 233 234 235 236 237 238 239 240 241 242
	  This support is also available as a module.  If so, the module
	  will be called i2c-hydra.

config I2C_POWERMAC
	tristate "Powermac I2C interface"
	depends on PPC_PMAC
	default y
	help
	  This exposes the various PowerMac i2c interfaces to the linux i2c
	  layer and to userland. It is used by various drivers on the PowerMac
	  platform, and should generally be enabled.
L
Linus Torvalds 已提交
243

244
	  This support is also available as a module.  If so, the module
J
Jean Delvare 已提交
245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388
	  will be called i2c-powermac.

comment "I2C system bus drivers (mostly embedded / system-on-chip)"

config I2C_AT91
	tristate "Atmel AT91 I2C Two-Wire interface (TWI)"
	depends on ARCH_AT91 && EXPERIMENTAL && BROKEN
	help
	  This supports the use of the I2C interface on Atmel AT91
	  processors.

	  This driver is BROKEN because the controller which it uses
	  will easily trigger RX overrun and TX underrun errors.  Using
	  low I2C clock rates may partially work around those issues
	  on some systems.  Another serious problem is that there is no
	  documented way to issue repeated START conditions, as needed
	  to support combined I2C messages.  Use the i2c-gpio driver
	  unless your system can cope with those limitations.

config I2C_AU1550
	tristate "Au1550/Au1200 SMBus interface"
	depends on SOC_AU1550 || SOC_AU1200
	help
	  If you say yes to this option, support will be included for the
	  Au1550 and Au1200 SMBus interface.

	  This driver can also be built as a module.  If so, the module
	  will be called i2c-au1550.

config I2C_BLACKFIN_TWI
	tristate "Blackfin TWI I2C support"
	depends on BLACKFIN
	depends on !BF561 && !BF531 && !BF532 && !BF533
	help
	  This is the I2C bus driver for Blackfin on-chip TWI interface.

	  This driver can also be built as a module.  If so, the module
	  will be called i2c-bfin-twi.

config I2C_BLACKFIN_TWI_CLK_KHZ
	int "Blackfin TWI I2C clock (kHz)"
	depends on I2C_BLACKFIN_TWI
	range 10 400
	default 50
	help
	  The unit of the TWI clock is kHz.

config I2C_DAVINCI
	tristate "DaVinci I2C driver"
	depends on ARCH_DAVINCI
	help
	  Support for TI DaVinci I2C controller driver.

	  This driver can also be built as a module.  If so, the module
	  will be called i2c-davinci.

	  Please note that this driver might be needed to bring up other
	  devices such as DaVinci NIC.
	  For details please see http://www.ti.com/davinci

config I2C_GPIO
	tristate "GPIO-based bitbanging I2C"
	depends on GENERIC_GPIO
	select I2C_ALGOBIT
	help
	  This is a very simple bitbanging I2C driver utilizing the
	  arch-neutral GPIO API to control the SCL and SDA lines.

config I2C_IBM_IIC
	tristate "IBM PPC 4xx on-chip I2C interface"
	depends on 4xx
	help
	  Say Y here if you want to use IIC peripheral found on
	  embedded IBM PPC 4xx based systems.

	  This driver can also be built as a module.  If so, the module
	  will be called i2c-ibm_iic.

config I2C_IOP3XX
	tristate "Intel IOPx3xx and IXP4xx on-chip I2C interface"
	depends on ARCH_IOP32X || ARCH_IOP33X || ARCH_IXP4XX || ARCH_IOP13XX
	help
	  Say Y here if you want to use the IIC bus controller on
	  the Intel IOPx3xx I/O Processors or IXP4xx Network Processors.

	  This driver can also be built as a module.  If so, the module
	  will be called i2c-iop3xx.

config I2C_IXP2000
	tristate "IXP2000 GPIO-Based I2C Interface (DEPRECATED)"
	depends on ARCH_IXP2000
	select I2C_ALGOBIT
	help
	  Say Y here if you have an Intel IXP2000 (2400, 2800, 2850) based
	  system and are using GPIO lines for an I2C bus.

	  This support is also available as a module. If so, the module
	  will be called i2c-ixp2000.

	  This driver is deprecated and will be dropped soon. Use i2c-gpio
	  instead.

config I2C_MPC
	tristate "MPC107/824x/85xx/52xx/86xx"
	depends on PPC32
	help
	  If you say yes to this option, support will be included for the
	  built-in I2C interface on the MPC107/Tsi107/MPC8240/MPC8245 and
	  MPC85xx/MPC8641 family processors. The driver may also work on 52xx
	  family processors, though interrupts are known not to work.

	  This driver can also be built as a module.  If so, the module
	  will be called i2c-mpc.

config I2C_MV64XXX
	tristate "Marvell mv64xxx I2C Controller"
	depends on (MV64X60 || PLAT_ORION) && EXPERIMENTAL
	help
	  If you say yes to this option, support will be included for the
	  built-in I2C interface on the Marvell 64xxx line of host bridges.

	  This driver can also be built as a module.  If so, the module
	  will be called i2c-mv64xxx.

config I2C_OCORES
	tristate "OpenCores I2C Controller"
	depends on EXPERIMENTAL
	help
	  If you say yes to this option, support will be included for the
	  OpenCores I2C controller. For details see
	  http://www.opencores.org/projects.cgi/web/i2c/overview

	  This driver can also be built as a module.  If so, the module
	  will be called i2c-ocores.

config I2C_OMAP
	tristate "OMAP I2C adapter"
	depends on ARCH_OMAP
	default y if MACH_OMAP_H3 || MACH_OMAP_OSK
	help
	  If you say yes to this option, support will be included for the
	  I2C interface on the Texas Instruments OMAP1/2 family of processors.
	  Like OMAP1510/1610/1710/5912 and OMAP242x.
	  For details see http://www.ti.com/omap.
L
Linus Torvalds 已提交
389

O
Olof Johansson 已提交
390 391
config I2C_PASEMI
	tristate "PA Semi SMBus interface"
J
Jan Engelhardt 已提交
392
	depends on PPC_PASEMI && PCI
O
Olof Johansson 已提交
393 394 395
	help
	  Supports the PA Semi PWRficient on-chip SMBus interfaces.

J
Jean Delvare 已提交
396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421
config I2C_PNX
	tristate "I2C bus support for Philips PNX targets"
	depends on ARCH_PNX4008
	help
	  This driver supports the Philips IP3204 I2C IP block master and/or
	  slave controller

	  This driver can also be built as a module.  If so, the module
	  will be called i2c-pnx.

config I2C_PXA
	tristate "Intel PXA2XX I2C adapter (EXPERIMENTAL)"
	depends on EXPERIMENTAL && ARCH_PXA
	help
	  If you have devices in the PXA I2C bus, say yes to this option.
	  This driver can also be built as a module.  If so, the module
	  will be called i2c-pxa.

config I2C_PXA_SLAVE
	bool "Intel PXA2XX I2C Slave comms support"
	depends on I2C_PXA
	help
	  Support I2C slave mode communications on the PXA I2C bus.  This
	  is necessary for systems where the PXA may be a target on the
	  I2C bus.

L
Linus Torvalds 已提交
422 423
config I2C_S3C2410
	tristate "S3C2410 I2C Driver"
J
Jan Engelhardt 已提交
424
	depends on ARCH_S3C2410
L
Linus Torvalds 已提交
425 426 427 428
	help
	  Say Y here to include support for I2C controller in the
	  Samsung S3C2410 based System-on-Chip devices.

J
Jean Delvare 已提交
429 430 431
config I2C_SH7760
	tristate "Renesas SH7760 I2C Controller"
	depends on CPU_SUBTYPE_SH7760
L
Linus Torvalds 已提交
432
	help
J
Jean Delvare 已提交
433 434 435 436 437 438 439 440 441 442 443 444 445 446
	  This driver supports the 2 I2C interfaces on the Renesas SH7760.

	  This driver can also be built as a module.  If so, the module
	  will be called i2c-sh7760.

config I2C_SH_MOBILE
	tristate "SuperH Mobile I2C Controller"
	depends on SUPERH
	help
	  If you say yes to this option, support will be included for the
	  built-in I2C interface on the Renesas SH-Mobile processor.

	  This driver can also be built as a module.  If so, the module
	  will be called i2c-sh_mobile.
L
Linus Torvalds 已提交
447

B
Ben Dooks 已提交
448 449 450 451
config I2C_SIMTEC
	tristate "Simtec Generic I2C interface"
	select I2C_ALGOBIT
	help
M
Matt LaPlante 已提交
452
	  If you say yes to this option, support will be included for
B
Ben Dooks 已提交
453 454 455 456
	  the Simtec Generic I2C interface. This driver is for the
	  simple I2C bus used on newer Simtec products for general
	  I2C, such as DDC on the Simtec BBD2016A.

M
Matt LaPlante 已提交
457
	  This driver can also be built as a module. If so, the module
B
Ben Dooks 已提交
458 459
	  will be called i2c-simtec.

J
Jean Delvare 已提交
460 461 462
config I2C_VERSATILE
	tristate "ARM Versatile/Realview I2C bus support"
	depends on ARCH_VERSATILE || ARCH_REALVIEW
L
Linus Torvalds 已提交
463 464
	select I2C_ALGOBIT
	help
J
Jean Delvare 已提交
465 466
	  Say yes if you want to support the I2C serial bus on ARMs Versatile
	  range of platforms.
L
Linus Torvalds 已提交
467

J
Jean Delvare 已提交
468 469
	  This driver can also be built as a module.  If so, the module
	  will be called i2c-versatile.
L
Linus Torvalds 已提交
470

J
Jean Delvare 已提交
471
comment "External I2C/SMBus adapter drivers"
472

J
Jean Delvare 已提交
473 474 475 476
config I2C_PARPORT
	tristate "Parallel port adapter"
	depends on PARPORT
	select I2C_ALGOBIT
L
Linus Torvalds 已提交
477
	help
J
Jean Delvare 已提交
478 479 480 481
	  This supports parallel port I2C adapters such as the ones made by
	  Philips or Velleman, Analog Devices evaluation boards, and more.
	  Basically any adapter using the parallel port as an I2C bus with
	  no extra chipset is supported by this driver, or could be.
L
Linus Torvalds 已提交
482

J
Jean Delvare 已提交
483 484 485
	  This driver is a replacement for (and was inspired by) an older
	  driver named i2c-philips-par.  The new driver supports more devices,
	  and makes it easier to add support for new devices.
L
Linus Torvalds 已提交
486

J
Jean Delvare 已提交
487 488
	  An adapter type parameter is now mandatory.  Please read the file
	  Documentation/i2c/busses/i2c-parport for details.
L
Linus Torvalds 已提交
489

J
Jean Delvare 已提交
490 491 492
	  Another driver exists, named i2c-parport-light, which doesn't depend
	  on the parport driver.  This is meant for embedded systems. Don't say
	  Y here if you intend to say Y or M there.
L
Linus Torvalds 已提交
493

494
	  This support is also available as a module.  If so, the module
J
Jean Delvare 已提交
495
	  will be called i2c-parport.
L
Linus Torvalds 已提交
496

J
Jean Delvare 已提交
497 498 499
config I2C_PARPORT_LIGHT
	tristate "Parallel port adapter (light)"
	select I2C_ALGOBIT
L
Linus Torvalds 已提交
500
	help
J
Jean Delvare 已提交
501 502 503 504
	  This supports parallel port I2C adapters such as the ones made by
	  Philips or Velleman, Analog Devices evaluation boards, and more.
	  Basically any adapter using the parallel port as an I2C bus with
	  no extra chipset is supported by this driver, or could be.
L
Linus Torvalds 已提交
505

J
Jean Delvare 已提交
506 507 508 509 510 511
	  This driver is a light version of i2c-parport.  It doesn't depend
	  on the parport driver, and uses direct I/O access instead.  This
	  might be preferred on embedded systems where wasting memory for
	  the clean but heavy parport handling is not an option.  The
	  drawback is a reduced portability and the impossibility to
	  daisy-chain other parallel port devices.
L
Linus Torvalds 已提交
512

J
Jean Delvare 已提交
513 514 515
	  Don't say Y here if you said Y or M to i2c-parport.  Saying M to
	  both is possible but both modules should not be loaded at the same
	  time.
L
Linus Torvalds 已提交
516

J
Jean Delvare 已提交
517 518
	  This support is also available as a module.  If so, the module
	  will be called i2c-parport-light.
L
Linus Torvalds 已提交
519

520 521 522 523 524 525 526 527 528 529 530 531 532 533 534 535
config I2C_TAOS_EVM
	tristate "TAOS evaluation module"
	depends on EXPERIMENTAL
	select SERIO
	select SERIO_SERPORT
	default n
	help
	  This supports TAOS evaluation modules on serial port. In order to
	  use this driver, you will need the inputattach tool, which is part
	  of the input-utils package.

	  If unsure, say N.

	  This support is also available as a module.  If so, the module
	  will be called i2c-taos-evm.

T
Till Harbaum 已提交
536
config I2C_TINY_USB
J
Jean Delvare 已提交
537
	tristate "Tiny-USB adapter"
T
Till Harbaum 已提交
538 539 540 541 542 543 544 545 546
	depends on USB
	help
	  If you say yes to this option, support will be included for the
	  i2c-tiny-usb, a simple do-it-yourself USB to I2C interface. See
	  http://www.harbaum.org/till/i2c_tiny_usb for hardware details.

	  This driver can also be built as a module.  If so, the module
	  will be called i2c-tiny-usb.

J
Jean Delvare 已提交
547 548 549 550 551 552
comment "Graphics adapter I2C/DDC channel drivers"
	depends on PCI

config I2C_VOODOO3
	tristate "Voodoo 3"
	depends on PCI
553 554
	select I2C_ALGOBIT
	help
J
Jean Delvare 已提交
555 556
	  If you say yes to this option, support will be included for the
	  Voodoo 3 I2C interface.
557 558

	  This driver can also be built as a module.  If so, the module
J
Jean Delvare 已提交
559 560 561
	  will be called i2c-voodoo3.

comment "Other I2C/SMBus bus drivers"
562

563
config I2C_ACORN
A
Al Viro 已提交
564
	tristate "Acorn IOC/IOMD I2C bus support"
J
Jan Engelhardt 已提交
565
	depends on ARCH_ACORN
566 567 568 569 570 571 572
	default y
	select I2C_ALGOBIT
	help
	  Say yes if you want to support the I2C bus on Acorn platforms.

	  If you don't know, say Y.

J
Jean Delvare 已提交
573 574 575 576
config I2C_ELEKTOR
	tristate "Elektor ISA card"
	depends on ISA && BROKEN_ON_SMP
	select I2C_ALGOPCF
L
Linus Torvalds 已提交
577
	help
J
Jean Delvare 已提交
578 579
	  This supports the PCF8584 ISA bus I2C adapter.  Say Y if you own
	  such an adapter.
L
Linus Torvalds 已提交
580

J
Jean Delvare 已提交
581 582
	  This support is also available as a module.  If so, the module
	  will be called i2c-elektor.
L
Linus Torvalds 已提交
583 584 585

config I2C_PCA_ISA
	tristate "PCA9564 on an ISA bus"
J
Jan Engelhardt 已提交
586
	depends on ISA
L
Linus Torvalds 已提交
587
	select I2C_ALGOPCA
588
	default n
L
Linus Torvalds 已提交
589
	help
590 591
	  This driver supports ISA boards using the Philips PCA9564
	  parallel bus to I2C bus controller.
592

L
Linus Torvalds 已提交
593 594 595
	  This driver can also be built as a module.  If so, the module
	  will be called i2c-pca-isa.

596 597 598 599 600
	  This device is almost undetectable and using this driver on a
	  system which doesn't have this device will result in long
	  delays when I2C/SMBus chip drivers are loaded (e.g. at boot
	  time).  If unsure, say N.

601 602 603 604 605 606 607 608 609 610 611
config I2C_PCA_PLATFORM
	tristate "PCA9564 as platform device"
	select I2C_ALGOPCA
	default n
	help
	  This driver supports a memory mapped Philips PCA9564
	  parallel bus to I2C bus controller.

	  This driver can also be built as a module.  If so, the module
	  will be called i2c-pca-platform.

612 613 614 615 616 617 618 619 620
config I2C_PMCMSP
	tristate "PMC MSP I2C TWI Controller"
	depends on PMC_MSP
	help
	  This driver supports the PMC TWI controller on MSP devices.

	  This driver can also be built as module. If so, the module
	  will be called i2c-pmcmsp.

J
Jean Delvare 已提交
621 622 623
config I2C_SIBYTE
	tristate "SiByte SMBus interface"
	depends on SIBYTE_SB1xxx_SOC
624
	help
J
Jean Delvare 已提交
625
	  Supports the SiByte SOC on-chip I2C interfaces (2 channels).
626

J
Jean Delvare 已提交
627 628 629 630 631 632 633
config I2C_STUB
	tristate "I2C/SMBus Test Stub"
	depends on EXPERIMENTAL && m
	default 'n'
	help
	  This module may be useful to developers of SMBus client drivers,
	  especially for certain kinds of sensor chips.
634

J
Jean Delvare 已提交
635 636 637 638 639 640 641 642 643
	  If you do build this module, be sure to read the notes and warnings
	  in <file:Documentation/i2c/i2c-stub>.

	  If you don't know what to do here, definitely say N.

config SCx200_I2C
	tristate "NatSemi SCx200 I2C using GPIO pins (DEPRECATED)"
	depends on SCx200_GPIO
	select I2C_ALGOBIT
644
	help
J
Jean Delvare 已提交
645
	  Enable the use of two GPIO pins of a SCx200 processor as an I2C bus.
646

J
Jean Delvare 已提交
647 648 649 650 651 652 653 654 655 656 657 658 659 660 661 662 663 664 665 666 667 668 669 670 671 672 673 674 675 676 677 678 679 680 681
	  If you don't know what to do here, say N.

	  This support is also available as a module.  If so, the module
	  will be called scx200_i2c.

	  This driver is deprecated and will be dropped soon. Use i2c-gpio
	  (or scx200_acb) instead.

config SCx200_I2C_SCL
	int "GPIO pin used for SCL"
	depends on SCx200_I2C
	default "12"
	help
	  Enter the GPIO pin number used for the SCL signal.  This value can
	  also be specified with a module parameter.

config SCx200_I2C_SDA
	int "GPIO pin used for SDA"
	depends on SCx200_I2C
	default "13"
	help
	  Enter the GPIO pin number used for the SSA signal.  This value can
	  also be specified with a module parameter.

config SCx200_ACB
	tristate "Geode ACCESS.bus support"
	depends on X86_32 && PCI
	help
	  Enable the use of the ACCESS.bus controllers on the Geode SCx200 and
	  SC1100 processors and the CS5535 and CS5536 Geode companion devices.

	  If you don't know what to do here, say N.

	  This support is also available as a module.  If so, the module
	  will be called scx200_acb.
682

L
Linus Torvalds 已提交
683
endmenu