uas.c 30.4 KB
Newer Older
M
Matthew Wilcox 已提交
1 2 3 4
/*
 * USB Attached SCSI
 * Note that this is not the same as the USB Mass Storage driver
 *
5
 * Copyright Hans de Goede <hdegoede@redhat.com> for Red Hat, Inc. 2013 - 2014
M
Matthew Wilcox 已提交
6 7 8 9 10 11 12 13 14
 * Copyright Matthew Wilcox for Intel Corp, 2010
 * Copyright Sarah Sharp for Intel Corp, 2010
 *
 * Distributed under the terms of the GNU GPL, version two.
 */

#include <linux/blkdev.h>
#include <linux/slab.h>
#include <linux/types.h>
15
#include <linux/module.h>
M
Matthew Wilcox 已提交
16
#include <linux/usb.h>
17
#include <linux/usb_usual.h>
18
#include <linux/usb/hcd.h>
M
Matthew Wilcox 已提交
19
#include <linux/usb/storage.h>
20
#include <linux/usb/uas.h>
M
Matthew Wilcox 已提交
21 22

#include <scsi/scsi.h>
23
#include <scsi/scsi_eh.h>
M
Matthew Wilcox 已提交
24 25 26 27 28 29
#include <scsi/scsi_dbg.h>
#include <scsi/scsi_cmnd.h>
#include <scsi/scsi_device.h>
#include <scsi/scsi_host.h>
#include <scsi/scsi_tcq.h>

30
#include "uas-detect.h"
31
#include "scsiglue.h"
32

33 34
#define MAX_CMNDS 256

M
Matthew Wilcox 已提交
35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51
/*
 * The r00-r01c specs define this version of the SENSE IU data structure.
 * It's still in use by several different firmware releases.
 */
struct sense_iu_old {
	__u8 iu_id;
	__u8 rsvd1;
	__be16 tag;
	__be16 len;
	__u8 status;
	__u8 service_response;
	__u8 sense[SCSI_SENSE_BUFFERSIZE];
};

struct uas_dev_info {
	struct usb_interface *intf;
	struct usb_device *udev;
52
	struct usb_anchor cmd_urbs;
53 54
	struct usb_anchor sense_urbs;
	struct usb_anchor data_urbs;
55
	unsigned long flags;
G
Gerd Hoffmann 已提交
56
	int qdepth, resetting;
M
Matthew Wilcox 已提交
57 58 59
	unsigned cmd_pipe, status_pipe, data_in_pipe, data_out_pipe;
	unsigned use_streams:1;
	unsigned uas_sense_old:1;
H
Hans de Goede 已提交
60
	unsigned shutdown:1;
61
	struct scsi_cmnd *cmnd[MAX_CMNDS];
G
Gerd Hoffmann 已提交
62
	spinlock_t lock;
G
Gerd Hoffmann 已提交
63
	struct work_struct work;
M
Matthew Wilcox 已提交
64 65 66
};

enum {
67
	SUBMIT_STATUS_URB	= (1 << 1),
M
Matthew Wilcox 已提交
68 69 70 71 72 73
	ALLOC_DATA_IN_URB	= (1 << 2),
	SUBMIT_DATA_IN_URB	= (1 << 3),
	ALLOC_DATA_OUT_URB	= (1 << 4),
	SUBMIT_DATA_OUT_URB	= (1 << 5),
	ALLOC_CMD_URB		= (1 << 6),
	SUBMIT_CMD_URB		= (1 << 7),
74 75 76 77
	COMMAND_INFLIGHT        = (1 << 8),
	DATA_IN_URB_INFLIGHT    = (1 << 9),
	DATA_OUT_URB_INFLIGHT   = (1 << 10),
	COMMAND_COMPLETED       = (1 << 11),
78
	COMMAND_ABORTED         = (1 << 12),
79
	IS_IN_WORK_LIST         = (1 << 13),
M
Matthew Wilcox 已提交
80 81 82 83 84 85 86 87 88 89 90 91 92 93
};

/* Overrides scsi_pointer */
struct uas_cmd_info {
	unsigned int state;
	unsigned int stream;
	struct urb *cmd_urb;
	struct urb *data_in_urb;
	struct urb *data_out_urb;
};

/* I hate forward declarations, but I actually have a loop */
static int uas_submit_urbs(struct scsi_cmnd *cmnd,
				struct uas_dev_info *devinfo, gfp_t gfp);
94
static void uas_do_work(struct work_struct *work);
G
Gerd Hoffmann 已提交
95
static int uas_try_complete(struct scsi_cmnd *cmnd, const char *caller);
96
static void uas_free_streams(struct uas_dev_info *devinfo);
G
Gerd Hoffmann 已提交
97
static void uas_log_cmd_state(struct scsi_cmnd *cmnd, const char *caller);
M
Matthew Wilcox 已提交
98 99 100

static void uas_do_work(struct work_struct *work)
{
G
Gerd Hoffmann 已提交
101 102
	struct uas_dev_info *devinfo =
		container_of(work, struct uas_dev_info, work);
M
Matthew Wilcox 已提交
103
	struct uas_cmd_info *cmdinfo;
H
Hans de Goede 已提交
104
	struct scsi_cmnd *cmnd;
G
Gerd Hoffmann 已提交
105
	unsigned long flags;
H
Hans de Goede 已提交
106
	int i, err;
M
Matthew Wilcox 已提交
107

G
Gerd Hoffmann 已提交
108
	spin_lock_irqsave(&devinfo->lock, flags);
H
Hans de Goede 已提交
109 110 111 112

	if (devinfo->resetting)
		goto out;

H
Hans de Goede 已提交
113 114 115 116 117 118
	for (i = 0; i < devinfo->qdepth; i++) {
		if (!devinfo->cmnd[i])
			continue;

		cmnd = devinfo->cmnd[i];
		cmdinfo = (void *)&cmnd->SCp;
119 120 121 122

		if (!(cmdinfo->state & IS_IN_WORK_LIST))
			continue;

O
Oliver Neukum 已提交
123
		err = uas_submit_urbs(cmnd, cmnd->device->hostdata, GFP_ATOMIC);
124
		if (!err)
G
Gerd Hoffmann 已提交
125
			cmdinfo->state &= ~IS_IN_WORK_LIST;
126
		else
G
Gerd Hoffmann 已提交
127
			schedule_work(&devinfo->work);
M
Matthew Wilcox 已提交
128
	}
H
Hans de Goede 已提交
129
out:
G
Gerd Hoffmann 已提交
130
	spin_unlock_irqrestore(&devinfo->lock, flags);
M
Matthew Wilcox 已提交
131 132
}

G
Gerd Hoffmann 已提交
133 134 135 136 137 138
static void uas_add_work(struct uas_cmd_info *cmdinfo)
{
	struct scsi_pointer *scp = (void *)cmdinfo;
	struct scsi_cmnd *cmnd = container_of(scp, struct scsi_cmnd, SCp);
	struct uas_dev_info *devinfo = cmnd->device->hostdata;

139
	lockdep_assert_held(&devinfo->lock);
G
Gerd Hoffmann 已提交
140 141 142 143
	cmdinfo->state |= IS_IN_WORK_LIST;
	schedule_work(&devinfo->work);
}

144
static void uas_zap_pending(struct uas_dev_info *devinfo, int result)
G
Gerd Hoffmann 已提交
145 146
{
	struct uas_cmd_info *cmdinfo;
H
Hans de Goede 已提交
147
	struct scsi_cmnd *cmnd;
G
Gerd Hoffmann 已提交
148
	unsigned long flags;
H
Hans de Goede 已提交
149
	int i, err;
G
Gerd Hoffmann 已提交
150 151

	spin_lock_irqsave(&devinfo->lock, flags);
H
Hans de Goede 已提交
152 153 154 155 156 157
	for (i = 0; i < devinfo->qdepth; i++) {
		if (!devinfo->cmnd[i])
			continue;

		cmnd = devinfo->cmnd[i];
		cmdinfo = (void *)&cmnd->SCp;
G
Gerd Hoffmann 已提交
158
		uas_log_cmd_state(cmnd, __func__);
159 160
		/* Sense urbs were killed, clear COMMAND_INFLIGHT manually */
		cmdinfo->state &= ~COMMAND_INFLIGHT;
161
		cmnd->result = result << 16;
162 163
		err = uas_try_complete(cmnd, __func__);
		WARN_ON(err != 0);
G
Gerd Hoffmann 已提交
164 165 166 167
	}
	spin_unlock_irqrestore(&devinfo->lock, flags);
}

M
Matthew Wilcox 已提交
168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211
static void uas_sense(struct urb *urb, struct scsi_cmnd *cmnd)
{
	struct sense_iu *sense_iu = urb->transfer_buffer;
	struct scsi_device *sdev = cmnd->device;

	if (urb->actual_length > 16) {
		unsigned len = be16_to_cpup(&sense_iu->len);
		if (len + 16 != urb->actual_length) {
			int newlen = min(len + 16, urb->actual_length) - 16;
			if (newlen < 0)
				newlen = 0;
			sdev_printk(KERN_INFO, sdev, "%s: urb length %d "
				"disagrees with IU sense data length %d, "
				"using %d bytes of sense data\n", __func__,
					urb->actual_length, len, newlen);
			len = newlen;
		}
		memcpy(cmnd->sense_buffer, sense_iu->sense, len);
	}

	cmnd->result = sense_iu->status;
}

static void uas_sense_old(struct urb *urb, struct scsi_cmnd *cmnd)
{
	struct sense_iu_old *sense_iu = urb->transfer_buffer;
	struct scsi_device *sdev = cmnd->device;

	if (urb->actual_length > 8) {
		unsigned len = be16_to_cpup(&sense_iu->len) - 2;
		if (len + 8 != urb->actual_length) {
			int newlen = min(len + 8, urb->actual_length) - 8;
			if (newlen < 0)
				newlen = 0;
			sdev_printk(KERN_INFO, sdev, "%s: urb length %d "
				"disagrees with IU sense data length %d, "
				"using %d bytes of sense data\n", __func__,
					urb->actual_length, len, newlen);
			len = newlen;
		}
		memcpy(cmnd->sense_buffer, sense_iu->sense, len);
	}

	cmnd->result = sense_iu->status;
212 213
}

214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229
/*
 * scsi-tags go from 0 - (nr_tags - 1), uas tags need to match stream-ids,
 * which go from 1 - nr_streams. And we use 1 for untagged commands.
 */
static int uas_get_tag(struct scsi_cmnd *cmnd)
{
	int tag;

	if (blk_rq_tagged(cmnd->request))
		tag = cmnd->request->tag + 2;
	else
		tag = 1;

	return tag;
}

230 231 232 233
static void uas_log_cmd_state(struct scsi_cmnd *cmnd, const char *caller)
{
	struct uas_cmd_info *ci = (void *)&cmnd->SCp;

234 235
	scmd_printk(KERN_INFO, cmnd,
		    "%s %p tag %d, inflight:%s%s%s%s%s%s%s%s%s%s%s%s%s\n",
236
		    caller, cmnd, uas_get_tag(cmnd),
237 238 239 240 241 242 243 244 245 246
		    (ci->state & SUBMIT_STATUS_URB)     ? " s-st"  : "",
		    (ci->state & ALLOC_DATA_IN_URB)     ? " a-in"  : "",
		    (ci->state & SUBMIT_DATA_IN_URB)    ? " s-in"  : "",
		    (ci->state & ALLOC_DATA_OUT_URB)    ? " a-out" : "",
		    (ci->state & SUBMIT_DATA_OUT_URB)   ? " s-out" : "",
		    (ci->state & ALLOC_CMD_URB)         ? " a-cmd" : "",
		    (ci->state & SUBMIT_CMD_URB)        ? " s-cmd" : "",
		    (ci->state & COMMAND_INFLIGHT)      ? " CMD"   : "",
		    (ci->state & DATA_IN_URB_INFLIGHT)  ? " IN"    : "",
		    (ci->state & DATA_OUT_URB_INFLIGHT) ? " OUT"   : "",
247
		    (ci->state & COMMAND_COMPLETED)     ? " done"  : "",
G
Gerd Hoffmann 已提交
248
		    (ci->state & COMMAND_ABORTED)       ? " abort" : "",
G
Gerd Hoffmann 已提交
249
		    (ci->state & IS_IN_WORK_LIST)       ? " work"  : "");
250 251 252 253 254
}

static int uas_try_complete(struct scsi_cmnd *cmnd, const char *caller)
{
	struct uas_cmd_info *cmdinfo = (void *)&cmnd->SCp;
G
Gerd Hoffmann 已提交
255
	struct uas_dev_info *devinfo = (void *)cmnd->device->hostdata;
256

257
	lockdep_assert_held(&devinfo->lock);
258 259
	if (cmdinfo->state & (COMMAND_INFLIGHT |
			      DATA_IN_URB_INFLIGHT |
260 261
			      DATA_OUT_URB_INFLIGHT |
			      COMMAND_ABORTED))
262
		return -EBUSY;
263
	WARN_ON_ONCE(cmdinfo->state & COMMAND_COMPLETED);
264
	cmdinfo->state |= COMMAND_COMPLETED;
265
	devinfo->cmnd[uas_get_tag(cmnd) - 1] = NULL;
266
	cmnd->scsi_done(cmnd);
267
	return 0;
M
Matthew Wilcox 已提交
268 269 270
}

static void uas_xfer_data(struct urb *urb, struct scsi_cmnd *cmnd,
271
			  unsigned direction)
M
Matthew Wilcox 已提交
272 273 274 275
{
	struct uas_cmd_info *cmdinfo = (void *)&cmnd->SCp;
	int err;

276
	cmdinfo->state |= direction | SUBMIT_STATUS_URB;
M
Matthew Wilcox 已提交
277 278
	err = uas_submit_urbs(cmnd, cmnd->device->hostdata, GFP_ATOMIC);
	if (err) {
G
Gerd Hoffmann 已提交
279
		uas_add_work(cmdinfo);
M
Matthew Wilcox 已提交
280 281 282 283 284 285
	}
}

static void uas_stat_cmplt(struct urb *urb)
{
	struct iu *iu = urb->transfer_buffer;
286
	struct Scsi_Host *shost = urb->context;
H
Hans de Goede 已提交
287
	struct uas_dev_info *devinfo = (struct uas_dev_info *)shost->hostdata;
288 289
	struct urb *data_in_urb = NULL;
	struct urb *data_out_urb = NULL;
M
Matthew Wilcox 已提交
290
	struct scsi_cmnd *cmnd;
291
	struct uas_cmd_info *cmdinfo;
G
Gerd Hoffmann 已提交
292
	unsigned long flags;
293
	unsigned int idx;
M
Matthew Wilcox 已提交
294

H
Hans de Goede 已提交
295 296 297 298 299
	spin_lock_irqsave(&devinfo->lock, flags);

	if (devinfo->resetting)
		goto out;

M
Matthew Wilcox 已提交
300
	if (urb->status) {
G
Gerd Hoffmann 已提交
301 302 303 304 305 306 307
		if (urb->status == -ENOENT) {
			dev_err(&urb->dev->dev, "stat urb: killed, stream %d\n",
				urb->stream_id);
		} else {
			dev_err(&urb->dev->dev, "stat urb: status %d\n",
				urb->status);
		}
H
Hans de Goede 已提交
308
		goto out;
G
Gerd Hoffmann 已提交
309 310
	}

311 312 313 314
	idx = be16_to_cpup(&iu->tag) - 1;
	if (idx >= MAX_CMNDS || !devinfo->cmnd[idx]) {
		dev_err(&urb->dev->dev,
			"stat urb: no pending cmd for tag %d\n", idx + 1);
H
Hans de Goede 已提交
315
		goto out;
316
	}
M
Matthew Wilcox 已提交
317

318
	cmnd = devinfo->cmnd[idx];
G
Gerd Hoffmann 已提交
319
	cmdinfo = (void *)&cmnd->SCp;
320 321 322 323 324 325

	if (!(cmdinfo->state & COMMAND_INFLIGHT)) {
		scmd_printk(KERN_ERR, cmnd, "unexpected status cmplt\n");
		goto out;
	}

M
Matthew Wilcox 已提交
326 327 328 329 330 331 332 333
	switch (iu->iu_id) {
	case IU_ID_STATUS:
		if (urb->actual_length < 16)
			devinfo->uas_sense_old = 1;
		if (devinfo->uas_sense_old)
			uas_sense_old(urb, cmnd);
		else
			uas_sense(urb, cmnd);
G
Gerd Hoffmann 已提交
334 335
		if (cmnd->result != 0) {
			/* cancel data transfers on error */
336 337
			data_in_urb = usb_get_urb(cmdinfo->data_in_urb);
			data_out_urb = usb_get_urb(cmdinfo->data_out_urb);
G
Gerd Hoffmann 已提交
338
		}
339 340
		cmdinfo->state &= ~COMMAND_INFLIGHT;
		uas_try_complete(cmnd, __func__);
M
Matthew Wilcox 已提交
341 342
		break;
	case IU_ID_READ_READY:
343 344 345 346 347
		if (!cmdinfo->data_in_urb ||
				(cmdinfo->state & DATA_IN_URB_INFLIGHT)) {
			scmd_printk(KERN_ERR, cmnd, "unexpected read rdy\n");
			break;
		}
M
Matthew Wilcox 已提交
348 349 350
		uas_xfer_data(urb, cmnd, SUBMIT_DATA_IN_URB);
		break;
	case IU_ID_WRITE_READY:
351 352 353 354 355
		if (!cmdinfo->data_out_urb ||
				(cmdinfo->state & DATA_OUT_URB_INFLIGHT)) {
			scmd_printk(KERN_ERR, cmnd, "unexpected write rdy\n");
			break;
		}
M
Matthew Wilcox 已提交
356 357 358 359 360 361
		uas_xfer_data(urb, cmnd, SUBMIT_DATA_OUT_URB);
		break;
	default:
		scmd_printk(KERN_ERR, cmnd,
			"Bogus IU (%d) received on status pipe\n", iu->iu_id);
	}
H
Hans de Goede 已提交
362
out:
G
Gerd Hoffmann 已提交
363
	usb_free_urb(urb);
G
Gerd Hoffmann 已提交
364
	spin_unlock_irqrestore(&devinfo->lock, flags);
365 366 367 368 369 370 371 372 373 374

	/* Unlinking of data urbs must be done without holding the lock */
	if (data_in_urb) {
		usb_unlink_urb(data_in_urb);
		usb_put_urb(data_in_urb);
	}
	if (data_out_urb) {
		usb_unlink_urb(data_out_urb);
		usb_put_urb(data_out_urb);
	}
M
Matthew Wilcox 已提交
375 376
}

377
static void uas_data_cmplt(struct urb *urb)
M
Matthew Wilcox 已提交
378
{
379 380
	struct scsi_cmnd *cmnd = urb->context;
	struct uas_cmd_info *cmdinfo = (void *)&cmnd->SCp;
G
Gerd Hoffmann 已提交
381
	struct uas_dev_info *devinfo = (void *)cmnd->device->hostdata;
382
	struct scsi_data_buffer *sdb = NULL;
G
Gerd Hoffmann 已提交
383
	unsigned long flags;
384

G
Gerd Hoffmann 已提交
385
	spin_lock_irqsave(&devinfo->lock, flags);
H
Hans de Goede 已提交
386

387 388 389
	if (cmdinfo->data_in_urb == urb) {
		sdb = scsi_in(cmnd);
		cmdinfo->state &= ~DATA_IN_URB_INFLIGHT;
390
		cmdinfo->data_in_urb = NULL;
391 392 393
	} else if (cmdinfo->data_out_urb == urb) {
		sdb = scsi_out(cmnd);
		cmdinfo->state &= ~DATA_OUT_URB_INFLIGHT;
394
		cmdinfo->data_out_urb = NULL;
395
	}
396 397
	if (sdb == NULL) {
		WARN_ON_ONCE(1);
H
Hans de Goede 已提交
398 399 400 401 402 403
		goto out;
	}

	if (devinfo->resetting)
		goto out;

404 405 406 407 408 409
	/* Data urbs should not complete before the cmd urb is submitted */
	if (cmdinfo->state & SUBMIT_CMD_URB) {
		scmd_printk(KERN_ERR, cmnd, "unexpected data cmplt\n");
		goto out;
	}

H
Hans de Goede 已提交
410
	if (urb->status) {
H
Hans de Goede 已提交
411 412 413 414 415 416
		if (urb->status != -ECONNRESET) {
			uas_log_cmd_state(cmnd, __func__);
			scmd_printk(KERN_ERR, cmnd,
				"data cmplt err %d stream %d\n",
				urb->status, urb->stream_id);
		}
G
Gerd Hoffmann 已提交
417 418 419 420 421
		/* error: no data transfered */
		sdb->resid = sdb->length;
	} else {
		sdb->resid = sdb->length - urb->actual_length;
	}
422
	uas_try_complete(cmnd, __func__);
H
Hans de Goede 已提交
423
out:
424
	usb_free_urb(urb);
G
Gerd Hoffmann 已提交
425
	spin_unlock_irqrestore(&devinfo->lock, flags);
M
Matthew Wilcox 已提交
426 427
}

H
Hans de Goede 已提交
428 429
static void uas_cmd_cmplt(struct urb *urb)
{
430 431
	if (urb->status)
		dev_err(&urb->dev->dev, "cmd cmplt err %d\n", urb->status);
H
Hans de Goede 已提交
432 433 434 435

	usb_free_urb(urb);
}

M
Matthew Wilcox 已提交
436
static struct urb *uas_alloc_data_urb(struct uas_dev_info *devinfo, gfp_t gfp,
437 438 439
				      unsigned int pipe, u16 stream_id,
				      struct scsi_cmnd *cmnd,
				      enum dma_data_direction dir)
M
Matthew Wilcox 已提交
440 441 442
{
	struct usb_device *udev = devinfo->udev;
	struct urb *urb = usb_alloc_urb(0, gfp);
443 444
	struct scsi_data_buffer *sdb = (dir == DMA_FROM_DEVICE)
		? scsi_in(cmnd) : scsi_out(cmnd);
M
Matthew Wilcox 已提交
445 446 447

	if (!urb)
		goto out;
448 449
	usb_fill_bulk_urb(urb, udev, pipe, NULL, sdb->length,
			  uas_data_cmplt, cmnd);
450
	urb->stream_id = stream_id;
M
Matthew Wilcox 已提交
451 452 453 454 455 456 457
	urb->num_sgs = udev->bus->sg_tablesize ? sdb->table.nents : 0;
	urb->sg = sdb->table.sgl;
 out:
	return urb;
}

static struct urb *uas_alloc_sense_urb(struct uas_dev_info *devinfo, gfp_t gfp,
G
Gerd Hoffmann 已提交
458
				       struct Scsi_Host *shost, u16 stream_id)
M
Matthew Wilcox 已提交
459 460 461 462 463 464 465 466
{
	struct usb_device *udev = devinfo->udev;
	struct urb *urb = usb_alloc_urb(0, gfp);
	struct sense_iu *iu;

	if (!urb)
		goto out;

467
	iu = kzalloc(sizeof(*iu), gfp);
M
Matthew Wilcox 已提交
468 469 470 471
	if (!iu)
		goto free;

	usb_fill_bulk_urb(urb, udev, devinfo->status_pipe, iu, sizeof(*iu),
G
Gerd Hoffmann 已提交
472
						uas_stat_cmplt, shost);
M
Matthew Wilcox 已提交
473 474 475 476 477 478 479 480 481 482
	urb->stream_id = stream_id;
	urb->transfer_flags |= URB_FREE_BUFFER;
 out:
	return urb;
 free:
	usb_free_urb(urb);
	return NULL;
}

static struct urb *uas_alloc_cmd_urb(struct uas_dev_info *devinfo, gfp_t gfp,
483
					struct scsi_cmnd *cmnd)
M
Matthew Wilcox 已提交
484 485 486 487 488 489 490 491 492 493 494 495 496 497
{
	struct usb_device *udev = devinfo->udev;
	struct scsi_device *sdev = cmnd->device;
	struct urb *urb = usb_alloc_urb(0, gfp);
	struct command_iu *iu;
	int len;

	if (!urb)
		goto out;

	len = cmnd->cmd_len - 16;
	if (len < 0)
		len = 0;
	len = ALIGN(len, 4);
498
	iu = kzalloc(sizeof(*iu) + len, gfp);
M
Matthew Wilcox 已提交
499 500 501 502
	if (!iu)
		goto free;

	iu->iu_id = IU_ID_COMMAND;
503
	iu->tag = cpu_to_be16(uas_get_tag(cmnd));
C
Christoph Hellwig 已提交
504
	iu->prio_attr = UAS_SIMPLE_TAG;
M
Matthew Wilcox 已提交
505 506 507 508 509
	iu->len = len;
	int_to_scsilun(sdev->lun, &iu->lun);
	memcpy(iu->cdb, cmnd->cmnd, cmnd->cmd_len);

	usb_fill_bulk_urb(urb, udev, devinfo->cmd_pipe, iu, sizeof(*iu) + len,
510
							uas_cmd_cmplt, NULL);
M
Matthew Wilcox 已提交
511 512 513 514 515 516 517 518 519 520 521 522 523 524
	urb->transfer_flags |= URB_FREE_BUFFER;
 out:
	return urb;
 free:
	usb_free_urb(urb);
	return NULL;
}

/*
 * Why should I request the Status IU before sending the Command IU?  Spec
 * says to, but also says the device may receive them in any order.  Seems
 * daft to me.
 */

H
Hans de Goede 已提交
525
static struct urb *uas_submit_sense_urb(struct scsi_cmnd *cmnd,
526
					gfp_t gfp, unsigned int stream)
M
Matthew Wilcox 已提交
527
{
H
Hans de Goede 已提交
528
	struct Scsi_Host *shost = cmnd->device->host;
H
Hans de Goede 已提交
529
	struct uas_dev_info *devinfo = (struct uas_dev_info *)shost->hostdata;
G
Gerd Hoffmann 已提交
530
	struct urb *urb;
H
Hans de Goede 已提交
531
	int err;
M
Matthew Wilcox 已提交
532

G
Gerd Hoffmann 已提交
533 534
	urb = uas_alloc_sense_urb(devinfo, gfp, shost, stream);
	if (!urb)
535
		return NULL;
536
	usb_anchor_urb(urb, &devinfo->sense_urbs);
H
Hans de Goede 已提交
537 538
	err = usb_submit_urb(urb, gfp);
	if (err) {
539
		usb_unanchor_urb(urb);
H
Hans de Goede 已提交
540
		uas_log_cmd_state(cmnd, __func__);
G
Gerd Hoffmann 已提交
541
		shost_printk(KERN_INFO, shost,
H
Hans de Goede 已提交
542 543
			     "sense urb submission error %d stream %d\n",
			     err, stream);
G
Gerd Hoffmann 已提交
544
		usb_free_urb(urb);
545
		return NULL;
M
Matthew Wilcox 已提交
546
	}
547
	return urb;
G
Gerd Hoffmann 已提交
548 549 550 551 552 553
}

static int uas_submit_urbs(struct scsi_cmnd *cmnd,
			   struct uas_dev_info *devinfo, gfp_t gfp)
{
	struct uas_cmd_info *cmdinfo = (void *)&cmnd->SCp;
554
	struct urb *urb;
H
Hans de Goede 已提交
555
	int err;
M
Matthew Wilcox 已提交
556

557
	lockdep_assert_held(&devinfo->lock);
558
	if (cmdinfo->state & SUBMIT_STATUS_URB) {
H
Hans de Goede 已提交
559
		urb = uas_submit_sense_urb(cmnd, gfp, cmdinfo->stream);
560 561
		if (!urb)
			return SCSI_MLQUEUE_DEVICE_BUSY;
562
		cmdinfo->state &= ~SUBMIT_STATUS_URB;
M
Matthew Wilcox 已提交
563 564 565 566
	}

	if (cmdinfo->state & ALLOC_DATA_IN_URB) {
		cmdinfo->data_in_urb = uas_alloc_data_urb(devinfo, gfp,
567
					devinfo->data_in_pipe, cmdinfo->stream,
568
					cmnd, DMA_FROM_DEVICE);
M
Matthew Wilcox 已提交
569 570 571 572 573 574
		if (!cmdinfo->data_in_urb)
			return SCSI_MLQUEUE_DEVICE_BUSY;
		cmdinfo->state &= ~ALLOC_DATA_IN_URB;
	}

	if (cmdinfo->state & SUBMIT_DATA_IN_URB) {
575
		usb_anchor_urb(cmdinfo->data_in_urb, &devinfo->data_urbs);
H
Hans de Goede 已提交
576 577
		err = usb_submit_urb(cmdinfo->data_in_urb, gfp);
		if (err) {
578
			usb_unanchor_urb(cmdinfo->data_in_urb);
H
Hans de Goede 已提交
579
			uas_log_cmd_state(cmnd, __func__);
M
Matthew Wilcox 已提交
580
			scmd_printk(KERN_INFO, cmnd,
H
Hans de Goede 已提交
581 582
				"data in urb submission error %d stream %d\n",
				err, cmdinfo->data_in_urb->stream_id);
M
Matthew Wilcox 已提交
583 584 585
			return SCSI_MLQUEUE_DEVICE_BUSY;
		}
		cmdinfo->state &= ~SUBMIT_DATA_IN_URB;
586
		cmdinfo->state |= DATA_IN_URB_INFLIGHT;
M
Matthew Wilcox 已提交
587 588 589 590
	}

	if (cmdinfo->state & ALLOC_DATA_OUT_URB) {
		cmdinfo->data_out_urb = uas_alloc_data_urb(devinfo, gfp,
591
					devinfo->data_out_pipe, cmdinfo->stream,
592
					cmnd, DMA_TO_DEVICE);
M
Matthew Wilcox 已提交
593 594 595 596 597 598
		if (!cmdinfo->data_out_urb)
			return SCSI_MLQUEUE_DEVICE_BUSY;
		cmdinfo->state &= ~ALLOC_DATA_OUT_URB;
	}

	if (cmdinfo->state & SUBMIT_DATA_OUT_URB) {
599
		usb_anchor_urb(cmdinfo->data_out_urb, &devinfo->data_urbs);
H
Hans de Goede 已提交
600 601
		err = usb_submit_urb(cmdinfo->data_out_urb, gfp);
		if (err) {
602
			usb_unanchor_urb(cmdinfo->data_out_urb);
H
Hans de Goede 已提交
603
			uas_log_cmd_state(cmnd, __func__);
M
Matthew Wilcox 已提交
604
			scmd_printk(KERN_INFO, cmnd,
H
Hans de Goede 已提交
605 606
				"data out urb submission error %d stream %d\n",
				err, cmdinfo->data_out_urb->stream_id);
M
Matthew Wilcox 已提交
607 608 609
			return SCSI_MLQUEUE_DEVICE_BUSY;
		}
		cmdinfo->state &= ~SUBMIT_DATA_OUT_URB;
610
		cmdinfo->state |= DATA_OUT_URB_INFLIGHT;
M
Matthew Wilcox 已提交
611 612 613
	}

	if (cmdinfo->state & ALLOC_CMD_URB) {
614
		cmdinfo->cmd_urb = uas_alloc_cmd_urb(devinfo, gfp, cmnd);
M
Matthew Wilcox 已提交
615 616 617 618 619 620
		if (!cmdinfo->cmd_urb)
			return SCSI_MLQUEUE_DEVICE_BUSY;
		cmdinfo->state &= ~ALLOC_CMD_URB;
	}

	if (cmdinfo->state & SUBMIT_CMD_URB) {
621
		usb_anchor_urb(cmdinfo->cmd_urb, &devinfo->cmd_urbs);
H
Hans de Goede 已提交
622 623
		err = usb_submit_urb(cmdinfo->cmd_urb, gfp);
		if (err) {
624
			usb_unanchor_urb(cmdinfo->cmd_urb);
H
Hans de Goede 已提交
625
			uas_log_cmd_state(cmnd, __func__);
M
Matthew Wilcox 已提交
626
			scmd_printk(KERN_INFO, cmnd,
H
Hans de Goede 已提交
627
				    "cmd urb submission error %d\n", err);
M
Matthew Wilcox 已提交
628 629
			return SCSI_MLQUEUE_DEVICE_BUSY;
		}
630
		cmdinfo->cmd_urb = NULL;
M
Matthew Wilcox 已提交
631
		cmdinfo->state &= ~SUBMIT_CMD_URB;
632
		cmdinfo->state |= COMMAND_INFLIGHT;
M
Matthew Wilcox 已提交
633 634 635 636 637
	}

	return 0;
}

J
Jeff Garzik 已提交
638
static int uas_queuecommand_lck(struct scsi_cmnd *cmnd,
M
Matthew Wilcox 已提交
639 640 641 642 643
					void (*done)(struct scsi_cmnd *))
{
	struct scsi_device *sdev = cmnd->device;
	struct uas_dev_info *devinfo = sdev->hostdata;
	struct uas_cmd_info *cmdinfo = (void *)&cmnd->SCp;
G
Gerd Hoffmann 已提交
644
	unsigned long flags;
645
	unsigned int stream;
M
Matthew Wilcox 已提交
646 647 648 649
	int err;

	BUILD_BUG_ON(sizeof(struct uas_cmd_info) > sizeof(struct scsi_pointer));

650 651 652 653 654 655 656 657 658
	if ((devinfo->flags & US_FL_NO_ATA_1X) &&
			(cmnd->cmnd[0] == ATA_12 || cmnd->cmnd[0] == ATA_16)) {
		memcpy(cmnd->sense_buffer, usb_stor_sense_invalidCDB,
		       sizeof(usb_stor_sense_invalidCDB));
		cmnd->result = SAM_STAT_CHECK_CONDITION;
		cmnd->scsi_done(cmnd);
		return 0;
	}

659 660
	spin_lock_irqsave(&devinfo->lock, flags);

661 662 663
	if (devinfo->resetting) {
		cmnd->result = DID_ERROR << 16;
		cmnd->scsi_done(cmnd);
664
		spin_unlock_irqrestore(&devinfo->lock, flags);
665 666 667
		return 0;
	}

668 669
	stream = uas_get_tag(cmnd);
	if (devinfo->cmnd[stream - 1]) {
G
Gerd Hoffmann 已提交
670
		spin_unlock_irqrestore(&devinfo->lock, flags);
M
Matthew Wilcox 已提交
671
		return SCSI_MLQUEUE_DEVICE_BUSY;
G
Gerd Hoffmann 已提交
672
	}
M
Matthew Wilcox 已提交
673 674 675

	cmnd->scsi_done = done;

676 677
	memset(cmdinfo, 0, sizeof(*cmdinfo));
	cmdinfo->stream = stream;
678
	cmdinfo->state = SUBMIT_STATUS_URB | ALLOC_CMD_URB | SUBMIT_CMD_URB;
M
Matthew Wilcox 已提交
679 680 681 682 683 684 685 686 687 688 689 690 691 692

	switch (cmnd->sc_data_direction) {
	case DMA_FROM_DEVICE:
		cmdinfo->state |= ALLOC_DATA_IN_URB | SUBMIT_DATA_IN_URB;
		break;
	case DMA_BIDIRECTIONAL:
		cmdinfo->state |= ALLOC_DATA_IN_URB | SUBMIT_DATA_IN_URB;
	case DMA_TO_DEVICE:
		cmdinfo->state |= ALLOC_DATA_OUT_URB | SUBMIT_DATA_OUT_URB;
	case DMA_NONE:
		break;
	}

	if (!devinfo->use_streams) {
693
		cmdinfo->state &= ~(SUBMIT_DATA_IN_URB | SUBMIT_DATA_OUT_URB);
M
Matthew Wilcox 已提交
694 695 696 697 698 699
		cmdinfo->stream = 0;
	}

	err = uas_submit_urbs(cmnd, devinfo, GFP_ATOMIC);
	if (err) {
		/* If we did nothing, give up now */
700
		if (cmdinfo->state & SUBMIT_STATUS_URB) {
G
Gerd Hoffmann 已提交
701
			spin_unlock_irqrestore(&devinfo->lock, flags);
M
Matthew Wilcox 已提交
702 703
			return SCSI_MLQUEUE_DEVICE_BUSY;
		}
G
Gerd Hoffmann 已提交
704
		uas_add_work(cmdinfo);
M
Matthew Wilcox 已提交
705 706
	}

707
	devinfo->cmnd[stream - 1] = cmnd;
G
Gerd Hoffmann 已提交
708
	spin_unlock_irqrestore(&devinfo->lock, flags);
M
Matthew Wilcox 已提交
709 710 711
	return 0;
}

J
Jeff Garzik 已提交
712 713
static DEF_SCSI_QCMD(uas_queuecommand)

714 715 716 717 718 719 720 721 722 723 724 725 726 727 728 729 730 731 732 733 734 735 736 737 738 739 740 741 742 743 744 745 746 747 748 749 750 751 752 753 754
/*
 * For now we do not support actually sending an abort to the device, so
 * this eh always fails. Still we must define it to make sure that we've
 * dropped all references to the cmnd in question once this function exits.
 */
static int uas_eh_abort_handler(struct scsi_cmnd *cmnd)
{
	struct uas_cmd_info *cmdinfo = (void *)&cmnd->SCp;
	struct uas_dev_info *devinfo = (void *)cmnd->device->hostdata;
	struct urb *data_in_urb = NULL;
	struct urb *data_out_urb = NULL;
	unsigned long flags;

	spin_lock_irqsave(&devinfo->lock, flags);

	uas_log_cmd_state(cmnd, __func__);

	/* Ensure that try_complete does not call scsi_done */
	cmdinfo->state |= COMMAND_ABORTED;

	/* Drop all refs to this cmnd, kill data urbs to break their ref */
	devinfo->cmnd[uas_get_tag(cmnd) - 1] = NULL;
	if (cmdinfo->state & DATA_IN_URB_INFLIGHT)
		data_in_urb = usb_get_urb(cmdinfo->data_in_urb);
	if (cmdinfo->state & DATA_OUT_URB_INFLIGHT)
		data_out_urb = usb_get_urb(cmdinfo->data_out_urb);

	spin_unlock_irqrestore(&devinfo->lock, flags);

	if (data_in_urb) {
		usb_kill_urb(data_in_urb);
		usb_put_urb(data_in_urb);
	}
	if (data_out_urb) {
		usb_kill_urb(data_out_urb);
		usb_put_urb(data_out_urb);
	}

	return FAILED;
}

M
Matthew Wilcox 已提交
755 756 757 758 759
static int uas_eh_bus_reset_handler(struct scsi_cmnd *cmnd)
{
	struct scsi_device *sdev = cmnd->device;
	struct uas_dev_info *devinfo = sdev->hostdata;
	struct usb_device *udev = devinfo->udev;
H
Hans de Goede 已提交
760
	unsigned long flags;
G
Gerd Hoffmann 已提交
761
	int err;
M
Matthew Wilcox 已提交
762

H
Hans de Goede 已提交
763 764 765 766 767 768 769
	err = usb_lock_device_for_reset(udev, devinfo->intf);
	if (err) {
		shost_printk(KERN_ERR, sdev->host,
			     "%s FAILED to get lock err %d\n", __func__, err);
		return FAILED;
	}

G
Gerd Hoffmann 已提交
770
	shost_printk(KERN_INFO, sdev->host, "%s start\n", __func__);
H
Hans de Goede 已提交
771 772

	spin_lock_irqsave(&devinfo->lock, flags);
G
Gerd Hoffmann 已提交
773
	devinfo->resetting = 1;
H
Hans de Goede 已提交
774 775
	spin_unlock_irqrestore(&devinfo->lock, flags);

776
	usb_kill_anchored_urbs(&devinfo->cmd_urbs);
G
Gerd Hoffmann 已提交
777 778
	usb_kill_anchored_urbs(&devinfo->sense_urbs);
	usb_kill_anchored_urbs(&devinfo->data_urbs);
779 780
	uas_zap_pending(devinfo, DID_RESET);

G
Gerd Hoffmann 已提交
781
	err = usb_reset_device(udev);
H
Hans de Goede 已提交
782 783

	spin_lock_irqsave(&devinfo->lock, flags);
G
Gerd Hoffmann 已提交
784
	devinfo->resetting = 0;
H
Hans de Goede 已提交
785
	spin_unlock_irqrestore(&devinfo->lock, flags);
M
Matthew Wilcox 已提交
786

H
Hans de Goede 已提交
787 788
	usb_unlock_device(udev);

G
Gerd Hoffmann 已提交
789 790 791 792
	if (err) {
		shost_printk(KERN_INFO, sdev->host, "%s FAILED\n", __func__);
		return FAILED;
	}
M
Matthew Wilcox 已提交
793

G
Gerd Hoffmann 已提交
794 795
	shost_printk(KERN_INFO, sdev->host, "%s success\n", __func__);
	return SUCCESS;
M
Matthew Wilcox 已提交
796 797 798 799
}

static int uas_slave_alloc(struct scsi_device *sdev)
{
H
Hans de Goede 已提交
800
	sdev->hostdata = (void *)sdev->host->hostdata;
801 802 803 804 805 806 807 808 809 810 811 812 813 814 815 816 817 818

	/* USB has unusual DMA-alignment requirements: Although the
	 * starting address of each scatter-gather element doesn't matter,
	 * the length of each element except the last must be divisible
	 * by the Bulk maxpacket value.  There's currently no way to
	 * express this by block-layer constraints, so we'll cop out
	 * and simply require addresses to be aligned at 512-byte
	 * boundaries.  This is okay since most block I/O involves
	 * hardware sectors that are multiples of 512 bytes in length,
	 * and since host controllers up through USB 2.0 have maxpacket
	 * values no larger than 512.
	 *
	 * But it doesn't suffice for Wireless USB, where Bulk maxpacket
	 * values can be as large as 2048.  To make that work properly
	 * will require changes to the block layer.
	 */
	blk_queue_update_dma_alignment(sdev->request_queue, (512 - 1));

M
Matthew Wilcox 已提交
819 820 821 822 823 824
	return 0;
}

static int uas_slave_configure(struct scsi_device *sdev)
{
	struct uas_dev_info *devinfo = sdev->hostdata;
H
Hans de Goede 已提交
825 826 827 828

	if (devinfo->flags & US_FL_NO_REPORT_OPCODES)
		sdev->no_report_opcodes = 1;

M
Matthew Wilcox 已提交
829
	scsi_set_tag_type(sdev, MSG_ORDERED_TAG);
830
	scsi_activate_tcq(sdev, devinfo->qdepth - 2);
M
Matthew Wilcox 已提交
831 832 833 834 835 836 837 838 839
	return 0;
}

static struct scsi_host_template uas_host_template = {
	.module = THIS_MODULE,
	.name = "uas",
	.queuecommand = uas_queuecommand,
	.slave_alloc = uas_slave_alloc,
	.slave_configure = uas_slave_configure,
840
	.eh_abort_handler = uas_eh_abort_handler,
M
Matthew Wilcox 已提交
841 842 843 844 845 846 847 848 849
	.eh_bus_reset_handler = uas_eh_bus_reset_handler,
	.can_queue = 65536,	/* Is there a limit on the _host_ ? */
	.this_id = -1,
	.sg_tablesize = SG_NONE,
	.cmd_per_lun = 1,	/* until we override it */
	.skip_settle_delay = 1,
	.ordered_tag = 1,
};

850 851 852 853 854 855
#define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \
		    vendorName, productName, useProtocol, useTransport, \
		    initFunction, flags) \
{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \
	.driver_info = (flags) }

M
Matthew Wilcox 已提交
856
static struct usb_device_id uas_usb_ids[] = {
857
#	include "unusual_uas.h"
M
Matthew Wilcox 已提交
858 859 860 861 862 863 864 865
	{ USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, USB_SC_SCSI, USB_PR_BULK) },
	{ USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, USB_SC_SCSI, USB_PR_UAS) },
	/* 0xaa is a prototype device I happen to have access to */
	{ USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, USB_SC_SCSI, 0xaa) },
	{ }
};
MODULE_DEVICE_TABLE(usb, uas_usb_ids);

866 867
#undef UNUSUAL_DEV

868 869 870 871 872 873 874 875 876 877 878 879 880
static int uas_switch_interface(struct usb_device *udev,
				struct usb_interface *intf)
{
	int alt;

	alt = uas_find_uas_alt_setting(intf);
	if (alt < 0)
		return alt;

	return usb_set_interface(udev,
			intf->altsetting[0].desc.bInterfaceNumber, alt);
}

881
static int uas_configure_endpoints(struct uas_dev_info *devinfo)
882 883 884 885 886 887 888 889
{
	struct usb_host_endpoint *eps[4] = { };
	struct usb_device *udev = devinfo->udev;
	int r;

	devinfo->uas_sense_old = 0;

	r = uas_find_endpoints(devinfo->intf->cur_altsetting, eps);
890 891 892 893 894 895 896 897 898 899 900
	if (r)
		return r;

	devinfo->cmd_pipe = usb_sndbulkpipe(udev,
					    usb_endpoint_num(&eps[0]->desc));
	devinfo->status_pipe = usb_rcvbulkpipe(udev,
					    usb_endpoint_num(&eps[1]->desc));
	devinfo->data_in_pipe = usb_rcvbulkpipe(udev,
					    usb_endpoint_num(&eps[2]->desc));
	devinfo->data_out_pipe = usb_sndbulkpipe(udev,
					    usb_endpoint_num(&eps[3]->desc));
M
Matthew Wilcox 已提交
901

902
	if (udev->speed != USB_SPEED_SUPER) {
903
		devinfo->qdepth = 32;
M
Matthew Wilcox 已提交
904 905
		devinfo->use_streams = 0;
	} else {
906
		devinfo->qdepth = usb_alloc_streams(devinfo->intf, eps + 1,
907
						    3, MAX_CMNDS, GFP_NOIO);
908 909
		if (devinfo->qdepth < 0)
			return devinfo->qdepth;
M
Matthew Wilcox 已提交
910 911
		devinfo->use_streams = 1;
	}
912 913

	return 0;
M
Matthew Wilcox 已提交
914 915
}

916 917 918 919 920 921 922 923
static void uas_free_streams(struct uas_dev_info *devinfo)
{
	struct usb_device *udev = devinfo->udev;
	struct usb_host_endpoint *eps[3];

	eps[0] = usb_pipe_endpoint(udev, devinfo->status_pipe);
	eps[1] = usb_pipe_endpoint(udev, devinfo->data_in_pipe);
	eps[2] = usb_pipe_endpoint(udev, devinfo->data_out_pipe);
924
	usb_free_streams(devinfo->intf, eps, 3, GFP_NOIO);
925 926
}

M
Matthew Wilcox 已提交
927 928
static int uas_probe(struct usb_interface *intf, const struct usb_device_id *id)
{
929 930
	int result = -ENOMEM;
	struct Scsi_Host *shost = NULL;
M
Matthew Wilcox 已提交
931 932 933
	struct uas_dev_info *devinfo;
	struct usb_device *udev = interface_to_usbdev(intf);

934 935 936
	if (!uas_use_uas_driver(intf, id))
		return -ENODEV;

937 938
	if (uas_switch_interface(udev, intf))
		return -ENODEV;
M
Matthew Wilcox 已提交
939

H
Hans de Goede 已提交
940 941
	shost = scsi_host_alloc(&uas_host_template,
				sizeof(struct uas_dev_info));
M
Matthew Wilcox 已提交
942
	if (!shost)
943
		goto set_alt0;
M
Matthew Wilcox 已提交
944 945 946

	shost->max_cmd_len = 16 + 252;
	shost->max_id = 1;
947 948
	shost->max_lun = 256;
	shost->max_channel = 0;
M
Matthew Wilcox 已提交
949 950
	shost->sg_tablesize = udev->bus->sg_tablesize;

H
Hans de Goede 已提交
951
	devinfo = (struct uas_dev_info *)shost->hostdata;
M
Matthew Wilcox 已提交
952 953
	devinfo->intf = intf;
	devinfo->udev = udev;
G
Gerd Hoffmann 已提交
954
	devinfo->resetting = 0;
H
Hans de Goede 已提交
955
	devinfo->shutdown = 0;
956 957
	devinfo->flags = id->driver_info;
	usb_stor_adjust_quirks(udev, &devinfo->flags);
958
	init_usb_anchor(&devinfo->cmd_urbs);
959 960
	init_usb_anchor(&devinfo->sense_urbs);
	init_usb_anchor(&devinfo->data_urbs);
G
Gerd Hoffmann 已提交
961
	spin_lock_init(&devinfo->lock);
G
Gerd Hoffmann 已提交
962
	INIT_WORK(&devinfo->work, uas_do_work);
963 964 965 966

	result = uas_configure_endpoints(devinfo);
	if (result)
		goto set_alt0;
M
Matthew Wilcox 已提交
967

968
	result = scsi_init_shared_tag_map(shost, devinfo->qdepth - 2);
M
Matthew Wilcox 已提交
969
	if (result)
970
		goto free_streams;
971

972
	usb_set_intfdata(intf, shost);
973 974
	result = scsi_add_host(shost, &intf->dev);
	if (result)
975
		goto free_streams;
976

M
Matthew Wilcox 已提交
977 978
	scsi_scan_host(shost);
	return result;
979

980
free_streams:
981
	uas_free_streams(devinfo);
982
	usb_set_intfdata(intf, NULL);
983 984
set_alt0:
	usb_set_interface(udev, intf->altsetting[0].desc.bInterfaceNumber, 0);
M
Matthew Wilcox 已提交
985 986 987 988 989 990 991
	if (shost)
		scsi_host_put(shost);
	return result;
}

static int uas_pre_reset(struct usb_interface *intf)
{
992
	struct Scsi_Host *shost = usb_get_intfdata(intf);
H
Hans de Goede 已提交
993
	struct uas_dev_info *devinfo = (struct uas_dev_info *)shost->hostdata;
994 995
	unsigned long flags;

H
Hans de Goede 已提交
996 997 998
	if (devinfo->shutdown)
		return 0;

999 1000 1001 1002 1003 1004 1005 1006 1007 1008 1009 1010 1011 1012
	/* Block new requests */
	spin_lock_irqsave(shost->host_lock, flags);
	scsi_block_requests(shost);
	spin_unlock_irqrestore(shost->host_lock, flags);

	/* Wait for any pending requests to complete */
	flush_work(&devinfo->work);
	if (usb_wait_anchor_empty_timeout(&devinfo->sense_urbs, 5000) == 0) {
		shost_printk(KERN_ERR, shost, "%s: timed out\n", __func__);
		return 1;
	}

	uas_free_streams(devinfo);

M
Matthew Wilcox 已提交
1013 1014 1015 1016 1017
	return 0;
}

static int uas_post_reset(struct usb_interface *intf)
{
1018
	struct Scsi_Host *shost = usb_get_intfdata(intf);
H
Hans de Goede 已提交
1019
	struct uas_dev_info *devinfo = (struct uas_dev_info *)shost->hostdata;
1020 1021
	unsigned long flags;

H
Hans de Goede 已提交
1022 1023 1024
	if (devinfo->shutdown)
		return 0;

1025 1026 1027 1028 1029
	if (uas_configure_endpoints(devinfo) != 0) {
		shost_printk(KERN_ERR, shost,
			     "%s: alloc streams error after reset", __func__);
		return 1;
	}
1030 1031 1032 1033 1034 1035 1036

	spin_lock_irqsave(shost->host_lock, flags);
	scsi_report_bus_reset(shost, 0);
	spin_unlock_irqrestore(shost->host_lock, flags);

	scsi_unblock_requests(shost);

M
Matthew Wilcox 已提交
1037 1038 1039
	return 0;
}

H
Hans de Goede 已提交
1040 1041 1042
static int uas_suspend(struct usb_interface *intf, pm_message_t message)
{
	struct Scsi_Host *shost = usb_get_intfdata(intf);
H
Hans de Goede 已提交
1043
	struct uas_dev_info *devinfo = (struct uas_dev_info *)shost->hostdata;
H
Hans de Goede 已提交
1044 1045 1046 1047 1048 1049 1050 1051 1052 1053 1054 1055 1056 1057 1058 1059 1060 1061 1062

	/* Wait for any pending requests to complete */
	flush_work(&devinfo->work);
	if (usb_wait_anchor_empty_timeout(&devinfo->sense_urbs, 5000) == 0) {
		shost_printk(KERN_ERR, shost, "%s: timed out\n", __func__);
		return -ETIME;
	}

	return 0;
}

static int uas_resume(struct usb_interface *intf)
{
	return 0;
}

static int uas_reset_resume(struct usb_interface *intf)
{
	struct Scsi_Host *shost = usb_get_intfdata(intf);
H
Hans de Goede 已提交
1063
	struct uas_dev_info *devinfo = (struct uas_dev_info *)shost->hostdata;
H
Hans de Goede 已提交
1064 1065 1066 1067 1068 1069 1070 1071 1072 1073 1074 1075 1076 1077 1078
	unsigned long flags;

	if (uas_configure_endpoints(devinfo) != 0) {
		shost_printk(KERN_ERR, shost,
			     "%s: alloc streams error after reset", __func__);
		return -EIO;
	}

	spin_lock_irqsave(shost->host_lock, flags);
	scsi_report_bus_reset(shost, 0);
	spin_unlock_irqrestore(shost->host_lock, flags);

	return 0;
}

M
Matthew Wilcox 已提交
1079 1080 1081
static void uas_disconnect(struct usb_interface *intf)
{
	struct Scsi_Host *shost = usb_get_intfdata(intf);
H
Hans de Goede 已提交
1082
	struct uas_dev_info *devinfo = (struct uas_dev_info *)shost->hostdata;
H
Hans de Goede 已提交
1083
	unsigned long flags;
M
Matthew Wilcox 已提交
1084

H
Hans de Goede 已提交
1085
	spin_lock_irqsave(&devinfo->lock, flags);
G
Gerd Hoffmann 已提交
1086
	devinfo->resetting = 1;
H
Hans de Goede 已提交
1087 1088
	spin_unlock_irqrestore(&devinfo->lock, flags);

G
Gerd Hoffmann 已提交
1089
	cancel_work_sync(&devinfo->work);
1090
	usb_kill_anchored_urbs(&devinfo->cmd_urbs);
1091 1092
	usb_kill_anchored_urbs(&devinfo->sense_urbs);
	usb_kill_anchored_urbs(&devinfo->data_urbs);
1093 1094
	uas_zap_pending(devinfo, DID_NO_CONNECT);

G
Gerd Hoffmann 已提交
1095
	scsi_remove_host(shost);
1096
	uas_free_streams(devinfo);
H
Hans de Goede 已提交
1097
	scsi_host_put(shost);
M
Matthew Wilcox 已提交
1098 1099
}

H
Hans de Goede 已提交
1100 1101 1102 1103 1104 1105 1106 1107 1108 1109
/*
 * Put the device back in usb-storage mode on shutdown, as some BIOS-es
 * hang on reboot when the device is still in uas mode. Note the reset is
 * necessary as some devices won't revert to usb-storage mode without it.
 */
static void uas_shutdown(struct device *dev)
{
	struct usb_interface *intf = to_usb_interface(dev);
	struct usb_device *udev = interface_to_usbdev(intf);
	struct Scsi_Host *shost = usb_get_intfdata(intf);
H
Hans de Goede 已提交
1110
	struct uas_dev_info *devinfo = (struct uas_dev_info *)shost->hostdata;
H
Hans de Goede 已提交
1111 1112 1113 1114 1115 1116 1117 1118 1119 1120

	if (system_state != SYSTEM_RESTART)
		return;

	devinfo->shutdown = 1;
	uas_free_streams(devinfo);
	usb_set_interface(udev, intf->altsetting[0].desc.bInterfaceNumber, 0);
	usb_reset_device(udev);
}

M
Matthew Wilcox 已提交
1121 1122 1123 1124 1125 1126
static struct usb_driver uas_driver = {
	.name = "uas",
	.probe = uas_probe,
	.disconnect = uas_disconnect,
	.pre_reset = uas_pre_reset,
	.post_reset = uas_post_reset,
H
Hans de Goede 已提交
1127 1128 1129
	.suspend = uas_suspend,
	.resume = uas_resume,
	.reset_resume = uas_reset_resume,
H
Hans de Goede 已提交
1130
	.drvwrap.driver.shutdown = uas_shutdown,
M
Matthew Wilcox 已提交
1131 1132 1133
	.id_table = uas_usb_ids,
};

1134
module_usb_driver(uas_driver);
M
Matthew Wilcox 已提交
1135 1136

MODULE_LICENSE("GPL");
1137 1138
MODULE_AUTHOR(
	"Hans de Goede <hdegoede@redhat.com>, Matthew Wilcox and Sarah Sharp");