st,quadfs.txt 1.7 KB
Newer Older
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17
Binding for a type of quad channel digital frequency synthesizer found on
certain STMicroelectronics consumer electronics SoC devices.

This version contains a programmable PLL which can generate up to 216, 432
or 660MHz (from a 30MHz oscillator input) as the input to the digital
synthesizers.

This binding uses the common clock binding[1].

[1] Documentation/devicetree/bindings/clock/clock-bindings.txt

Required properties:
- compatible : shall be:
  "st,stih416-quadfs216",	"st,quadfs"
  "st,stih416-quadfs432",	"st,quadfs"
  "st,stih416-quadfs660-E",	"st,quadfs"
  "st,stih416-quadfs660-F",	"st,quadfs"
18 19 20
  "st,stih407-quadfs660-C",	"st,quadfs"
  "st,stih407-quadfs660-D",	"st,quadfs"

21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37

- #clock-cells : from common clock binding; shall be set to 1.

- reg : A Base address and length of the register set.

- clocks : from common clock binding

- clock-output-names : From common clock binding. The block has 4
                       clock outputs but not all of them in a specific instance
                       have to be used in the SoC. If a clock name is left as
                       an empty string then no clock will be created for the
                       output associated with that string index. If fewer than
                       4 strings are provided then no clocks will be created
                       for the remaining outputs.

Example:

38
	clockgen_e: clockgen-e@fd3208bc {
39 40 41 42
                #clock-cells = <1>;
                compatible = "st,stih416-quadfs660-E", "st,quadfs";
                reg = <0xfd3208bc 0xB0>;

43 44 45 46 47
                clocks = <&clk_sysin>;
                clock-output-names = "clk-m-pix-mdtp-0",
				     "clk-m-pix-mdtp-1",
				     "clk-m-pix-mdtp-2",
				     "clk-m-mpelpc";
48
        };