提交 0268099c 编写于 作者: G Gabriel FERNANDEZ 提交者: Mike Turquette

clk: st: Update ST clock binding documentation

Naming convention was changed in dts file but the
clock binding documentation hasn't been updated.
Signed-off-by: NGabriel Fernandez <gabriel.fernandez@linaro.org>
Acked-by: NPeter Griffin <peter.griffin@linaro.org>
Signed-off-by: NMike Turquette <mturquette@linaro.org>
上级 381c1ccd
......@@ -24,26 +24,26 @@ Required properties:
Example:
clockgenA@fd345000 {
clockgen-a@fd345000 {
reg = <0xfd345000 0xb50>;
CLK_M_A1_DIV1: CLK_M_A1_DIV1 {
clk_m_a1_div1: clk-m-a1-div1 {
#clock-cells = <1>;
compatible = "st,clkgena-divmux-c32-odf1",
"st,clkgena-divmux";
clocks = <&CLK_M_A1_OSC_PREDIV>,
<&CLK_M_A1_PLL0 1>, /* PLL0 PHI1 */
<&CLK_M_A1_PLL1 1>; /* PLL1 PHI1 */
clock-output-names = "CLK_M_RX_ICN_TS",
"CLK_M_RX_ICN_VDP_0",
"", /* Unused */
"CLK_M_PRV_T1_BUS",
"CLK_M_ICN_REG_12",
"CLK_M_ICN_REG_10",
"", /* Unused */
"CLK_M_ICN_ST231";
clocks = <&clk_m_a1_osc_prediv>,
<&clk_m_a1_pll0 1>, /* PLL0 PHI1 */
<&clk_m_a1_pll1 1>; /* PLL1 PHI1 */
clock-output-names = "clk-m-rx-icn-ts",
"clk-m-rx-icn-vdp-0",
"", /* unused */
"clk-m-prv-t1-bus",
"clk-m-icn-reg-12",
"clk-m-icn-reg-10",
"", /* unused */
"clk-m-icn-st231";
};
};
......@@ -17,7 +17,7 @@ Required properties:
"st,stih416-clkgenf-vcc-sd", "st,clkgen-mux"
"st,stih415-clkgen-a9-mux", "st,clkgen-mux"
"st,stih416-clkgen-a9-mux", "st,clkgen-mux"
"st,stih407-clkgen-a9-mux", "st,clkgen-mux"
- #clock-cells : from common clock binding; shall be set to 0.
......@@ -27,10 +27,10 @@ Required properties:
Example:
CLK_M_HVA: CLK_M_HVA {
clk_m_hva: clk-m-hva@fd690868 {
#clock-cells = <0>;
compatible = "st,stih416-clkgenf-vcc-hva", "st,clkgen-mux";
reg = <0xfd690868 4>;
clocks = <&CLOCKGEN_F 1>, <&CLK_M_A1_DIV0 3>;
clocks = <&clockgen_f 1>, <&clk_m_a1_div0 3>;
};
......@@ -19,11 +19,14 @@ Required properties:
"st,stih415-plls-c32-ddr", "st,clkgen-plls-c32"
"st,stih416-plls-c32-a9", "st,clkgen-plls-c32"
"st,stih416-plls-c32-ddr", "st,clkgen-plls-c32"
"st,stih407-plls-c32-a0", "st,clkgen-plls-c32"
"st,stih407-plls-c32-a9", "st,clkgen-plls-c32"
"st,stih407-plls-c32-c0_0", "st,clkgen-plls-c32"
"st,stih407-plls-c32-c0_1", "st,clkgen-plls-c32"
"st,stih415-gpu-pll-c32", "st,clkgengpu-pll-c32"
"st,stih416-gpu-pll-c32", "st,clkgengpu-pll-c32"
- #clock-cells : From common clock binding; shall be set to 1.
- clocks : From common clock binding
......@@ -32,17 +35,17 @@ Required properties:
Example:
clockgenA@fee62000 {
clockgen-a@fee62000 {
reg = <0xfee62000 0xb48>;
CLK_S_A0_PLL: CLK_S_A0_PLL {
clk_s_a0_pll: clk-s-a0-pll {
#clock-cells = <1>;
compatible = "st,clkgena-plls-c65";
clocks = <&CLK_SYSIN>;
clocks = <&clk_sysin>;
clock-output-names = "CLK_S_A0_PLL0_HS",
"CLK_S_A0_PLL0_LS",
"CLK_S_A0_PLL1";
clock-output-names = "clk-s-a0-pll0-hs",
"clk-s-a0-pll0-ls",
"clk-s-a0-pll1";
};
};
......@@ -20,17 +20,17 @@ Required properties:
Example:
clockgenA@fd345000 {
clockgen-a@fd345000 {
reg = <0xfd345000 0xb50>;
CLK_M_A2_OSC_PREDIV: CLK_M_A2_OSC_PREDIV {
clk_m_a2_osc_prediv: clk-m-a2-osc-prediv {
#clock-cells = <0>;
compatible = "st,clkgena-prediv-c32",
"st,clkgena-prediv";
clocks = <&CLK_SYSIN>;
clocks = <&clk_sysin>;
clock-output-names = "CLK_M_A2_OSC_PREDIV";
clock-output-names = "clk-m-a2-osc-prediv";
};
};
......@@ -32,22 +32,30 @@ Required properties:
Example:
CLOCKGEN_C_VCC: CLOCKGEN_C_VCC {
clockgen_c_vcc: clockgen-c-vcc@0xfe8308ac {
#clock-cells = <1>;
compatible = "st,stih416-clkgenc", "st,clkgen-vcc";
reg = <0xfe8308ac 12>;
clocks = <&CLK_S_VCC_HD>, <&CLOCKGEN_C 1>,
<&CLK_S_TMDS_FROMPHY>, <&CLOCKGEN_C 2>;
clock-output-names =
"CLK_S_PIX_HDMI", "CLK_S_PIX_DVO",
"CLK_S_OUT_DVO", "CLK_S_PIX_HD",
"CLK_S_HDDAC", "CLK_S_DENC",
"CLK_S_SDDAC", "CLK_S_PIX_MAIN",
"CLK_S_PIX_AUX", "CLK_S_STFE_FRC_0",
"CLK_S_REF_MCRU", "CLK_S_SLAVE_MCRU",
"CLK_S_TMDS_HDMI", "CLK_S_HDMI_REJECT_PLL",
"CLK_S_THSENS";
clocks = <&clk_s_vcc_hd>,
<&clockgen_c 1>,
<&clk_s_tmds_fromphy>,
<&clockgen_c 2>;
clock-output-names = "clk-s-pix-hdmi",
"clk-s-pix-dvo",
"clk-s-out-dvo",
"clk-s-pix-hd",
"clk-s-hddac",
"clk-s-denc",
"clk-s-sddac",
"clk-s-pix-main",
"clk-s-pix-aux",
"clk-s-stfe-frc-0",
"clk-s-ref-mcru",
"clk-s-slave-mcru",
"clk-s-tmds-hdmi",
"clk-s-hdmi-reject-pll",
"clk-s-thsens";
};
......@@ -24,60 +24,72 @@ address is common of all subnode.
quadfs_node {
...
};
mux_node {
...
};
vcc_node {
...
};
...
};
This binding uses the common clock binding[1].
Each subnode should use the binding discribe in [2]..[4]
Each subnode should use the binding discribe in [2]..[7]
[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
[2] Documentation/devicetree/bindings/clock/st,quadfs.txt
[3] Documentation/devicetree/bindings/clock/st,quadfs.txt
[4] Documentation/devicetree/bindings/clock/st,quadfs.txt
[2] Documentation/devicetree/bindings/clock/st,clkgen-divmux.txt
[3] Documentation/devicetree/bindings/clock/st,clkgen-mux.txt
[4] Documentation/devicetree/bindings/clock/st,clkgen-pll.txt
[5] Documentation/devicetree/bindings/clock/st,clkgen-prediv.txt
[6] Documentation/devicetree/bindings/clock/st,vcc.txt
[7] Documentation/devicetree/bindings/clock/st,quadfs.txt
Required properties:
- reg : A Base address and length of the register set.
Example:
clockgenA@fee62000 {
clockgen-a@fee62000 {
reg = <0xfee62000 0xb48>;
CLK_S_A0_PLL: CLK_S_A0_PLL {
clk_s_a0_pll: clk-s-a0-pll {
#clock-cells = <1>;
compatible = "st,clkgena-plls-c65";
clocks = <&CLK_SYSIN>;
clocks = <&clk-sysin>;
clock-output-names = "CLK_S_A0_PLL0_HS",
"CLK_S_A0_PLL0_LS",
"CLK_S_A0_PLL1";
clock-output-names = "clk-s-a0-pll0-hs",
"clk-s-a0-pll0-ls",
"clk-s-a0-pll1";
};
CLK_S_A0_OSC_PREDIV: CLK_S_A0_OSC_PREDIV {
clk_s_a0_osc_prediv: clk-s-a0-osc-prediv {
#clock-cells = <0>;
compatible = "st,clkgena-prediv-c65",
"st,clkgena-prediv";
clocks = <&CLK_SYSIN>;
clocks = <&clk_sysin>;
clock-output-names = "CLK_S_A0_OSC_PREDIV";
clock-output-names = "clk-s-a0-osc-prediv";
};
CLK_S_A0_HS: CLK_S_A0_HS {
clk_s_a0_hs: clk-s-a0-hs {
#clock-cells = <1>;
compatible = "st,clkgena-divmux-c65-hs",
"st,clkgena-divmux";
clocks = <&CLK_S_A0_OSC_PREDIV>,
<&CLK_S_A0_PLL 0>, /* PLL0 HS */
<&CLK_S_A0_PLL 2>; /* PLL1 */
clocks = <&clk-s_a0_osc_prediv>,
<&clk-s_a0_pll 0>, /* pll0 hs */
<&clk-s_a0_pll 2>; /* pll1 */
clock-output-names = "CLK_S_FDMA_0",
"CLK_S_FDMA_1",
""; /* CLK_S_JIT_SENSE */
/* Fourth output unused */
clock-output-names = "clk-s-fdma-0",
"clk-s-fdma-1",
""; /* clk-s-jit-sense */
/* fourth output unused */
};
};
......@@ -15,6 +15,9 @@ Required properties:
"st,stih416-quadfs432", "st,quadfs"
"st,stih416-quadfs660-E", "st,quadfs"
"st,stih416-quadfs660-F", "st,quadfs"
"st,stih407-quadfs660-C", "st,quadfs"
"st,stih407-quadfs660-D", "st,quadfs"
- #clock-cells : from common clock binding; shall be set to 1.
......@@ -32,14 +35,14 @@ Required properties:
Example:
CLOCKGEN_E: CLOCKGEN_E {
clockgen_e: clockgen-e@fd3208bc {
#clock-cells = <1>;
compatible = "st,stih416-quadfs660-E", "st,quadfs";
reg = <0xfd3208bc 0xB0>;
clocks = <&CLK_SYSIN>;
clock-output-names = "CLK_M_PIX_MDTP_0",
"CLK_M_PIX_MDTP_1",
"CLK_M_PIX_MDTP_2",
"CLK_M_MPELPC";
clocks = <&clk_sysin>;
clock-output-names = "clk-m-pix-mdtp-0",
"clk-m-pix-mdtp-1",
"clk-m-pix-mdtp-2",
"clk-m-mpelpc";
};
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册