- 26 6月, 2020 17 次提交
-
-
由 Joseph Myers 提交于
The floatx80 remainder implementation ignores the high bit of the significand when checking whether an operand (numerator) with zero exponent is zero. This means it mishandles a pseudo-denormal representation of 0x1p-16382L by treating it as zero. Fix this by checking the whole significand instead. Signed-off-by: NJoseph Myers <joseph@codesourcery.com> Reviewed-by: NRichard Henderson <richard.henderson@linaro.org> Message-Id: <alpine.DEB.2.21.2006081655180.23637@digraph.polyomino.org.uk> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Joseph Myers 提交于
The m68k-specific softfloat code includes a function floatx80_mod that is extremely similar to floatx80_rem, but computing the remainder based on truncating the quotient toward zero rather than rounding it to nearest integer. This is also useful for emulating the x87 fprem and fprem1 instructions. Change the floatx80_rem implementation into floatx80_modrem that can perform either operation, with both floatx80_rem and floatx80_mod as thin wrappers available for all targets. There does not appear to be any use for the _mod operation for other floating-point formats in QEMU (the only other architectures using _rem at all are linux-user/arm/nwfpe, for FPA emulation, and openrisc, for instructions that have been removed in the latest version of the architecture), so no change is made to the code for other formats. Signed-off-by: NJoseph Myers <joseph@codesourcery.com> Reviewed-by: NRichard Henderson <richard.henderson@linaro.org> Message-Id: <alpine.DEB.2.21.2006081654280.23637@digraph.polyomino.org.uk> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Joseph Myers 提交于
The x87 f2xm1 emulation is currently based around conversion to double. This is inherently unsuitable for a good emulation of any floatx80 operation, even before considering that it is a particularly naive implementation using double (computing with pow and then subtracting 1 rather than attempting a better emulation using expm1). Reimplement using the soft-float operations, including additions and multiplications with higher precision where appropriate to limit accumulation of errors. I considered reusing some of the m68k code for transcendental operations, but the instructions don't generally correspond exactly to x87 operations (for example, m68k has 2^x and e^x - 1, but not 2^x - 1); to avoid possible accumulation of errors from applying multiple such operations each rounding to floatx80 precision, I wrote a direct implementation of 2^x - 1 instead. It would be possible in principle to make the implementation more efficient by doing the intermediate operations directly with significands, signs and exponents and not packing / unpacking floatx80 format for each operation, but that would make it significantly more complicated and it's not clear that's worthwhile; the m68k emulation doesn't try to do that. A test is included with many randomly generated inputs. The assumption of the test is that the result in round-to-nearest mode should always be one of the two closest floating-point numbers to the mathematical value of 2^x - 1; the implementation aims to do somewhat better than that (about 70 correct bits before rounding). I haven't investigated how accurate hardware is. Signed-off-by: NJoseph Myers <joseph@codesourcery.com> Message-Id: <alpine.DEB.2.21.2006112341010.18393@digraph.polyomino.org.uk> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Anthony PERARD 提交于
Fix typo. Fixes: acd0c941 ("xen: fix build without pci passthrough") Signed-off-by: NAnthony PERARD <anthony.perard@citrix.com> Message-Id: <20200619103115.254127-1-anthony.perard@citrix.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Liao Pingfang 提交于
We need install qemu-[qmp/ga]-ref.* files into the subdirectory of qemu docs: interop. If we visit the following address and click the link to qemu-qmp-ref.html: https://www.qemu.org/docs/master/interop/bitmaps.html#basic-qmp-usage It will report following error: " Not Found The requested URL /docs/master/interop/qemu-qmp-ref.html was not found on this server. " Signed-off-by: NLiao Pingfang <liao.pingfang@zte.com.cn> Reviewed-by: NPhilippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <1591663670-47712-1-git-send-email-wang.yi59@zte.com.cn> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Thomas Huth 提交于
Some tracepoints in megasas.c use a guest-controlled value as an index into the mfi_frame_desc[] array. Thus a malicious guest could cause an out-of-bounds error here. Fortunately, the impact is very low since this can only happen when the corresponding tracepoints have been enabled before, but the problem should be fixed anyway with a proper check. Buglink: https://bugs.launchpad.net/qemu/+bug/1882065Signed-off-by: NThomas Huth <thuth@redhat.com> Message-Id: <20200615072629.32321-1-thuth@redhat.com> Reviewed-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Jingqi Liu 提交于
For device dax (e.g., /dev/dax0.0), the NUM of 'align=NUM' option needs to match the alignment requirement of the device dax. It must be larger than or equal to the 'align' of device dax. Reviewed-by: NJoao Martins <joao.m.martins@oracle.com> Signed-off-by: NJingqi Liu <jingqi.liu@intel.com> Message-Id: <20200429085011.63752-3-jingqi.liu@intel.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Jingqi Liu 提交于
If the backend file is devdax pmem character device, the alignment specified by the option 'align=NUM' in the '-object memory-backend-file' needs to match the alignment requirement of the devdax pmem character device. This patch uses the interfaces of libdaxctl to fetch the devdax pmem file 'align', so that we can compare it with the NUM of 'align=NUM'. The NUM needs to be larger than or equal to the devdax pmem file 'align'. It also fixes the problem that mmap() returns failure in qemu_ram_mmap() when the NUM of 'align=NUM' is less than the devdax pmem file 'align'. Suggested-by: NDan Williams <dan.j.williams@intel.com> Reviewed-by: NJoao Martins <joao.m.martins@oracle.com> Signed-off-by: NJingqi Liu <jingqi.liu@intel.com> Message-Id: <20200429085011.63752-2-jingqi.liu@intel.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Jingqi Liu 提交于
Add a pair of configure options --{enable,disable}-libdaxctl to control whether QEMU is compiled with libdaxctl [1]. Libdaxctl is a utility library for managing the device dax subsystem. QEMU uses mmap(2) to maps vNVDIMM backends and aligns the mapping address to the page size (getpagesize(2)) by default. However, some types of backends may require an alignment different than the page size. The 'align' option is provided to memory-backend-file to allow users to specify the proper alignment. For device dax (e.g., /dev/dax0.0), the 'align' option needs to match the alignment requirement of the device dax, which can be fetched through the APIs of libdaxctl version 57 or up. [1] Libdaxctl is a part of ndctl project. The project's repository is: https://github.com/pmem/ndctl For more information about libdaxctl APIs, you can refer to the comments in source code of: pmem/ndctl/daxctl/lib/libdaxctl.c. Reviewed-by: NJoao Martins <joao.m.martins@oracle.com> Signed-off-by: NJingqi Liu <jingqi.liu@intel.com> Message-Id: <20200429085011.63752-4-jingqi.liu@intel.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Pavel Dovgalyuk 提交于
Sometimes virtual timer callbacks depend on order of virtual timer processing and warping of virtual clock. Therefore every callback should be logged to make replay deterministic. This patch creates a checkpoint before every virtual timer callback. With these checkpoints virtual timers processing and clock warping events order is completely deterministic. Signed-off-by: NPavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru> Acked-by: NAlex Bennée <alex.bennee@linaro.org> -- v2: - remove mutex lock/unlock for virtual clock checkpoint since it is not process any asynchronous events (commit ca9759c2) - bump record/replay log file version Message-Id: <159012932716.27256.8854065545365559921.stgit@pasha-ThinkPad-X280> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Pavel Dovgalyuk 提交于
When QEMU is executed in console mode without any external event sources, main loop may sleep for a very long time. But in case of replay there is another event source - event log. This patch adds main loop notification when the vCPU loop has nothing to do and main loop should process the inputs from the event log. Signed-off-by: NPavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru> Message-Id: <159013007895.28110.2020104406699709721.stgit@pasha-ThinkPad-X280> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Michael S. Tsirkin 提交于
Memory API documentation documents valid .min_access_size and .max_access_size fields and explains that any access outside these boundaries is blocked. This is what devices seem to assume. However this is not what the implementation does: it simply ignores the boundaries unless there's an "accepts" callback. Naturally, this breaks a bunch of devices. Revert to the documented behaviour. Devices that want to allow any access can just drop the valid field, or add the impl field to have accesses converted to appropriate length. Cc: qemu-stable@nongnu.org Reviewed-by: NRichard Henderson <rth@twiddle.net> Fixes: CVE-2020-13754 Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1842363 Fixes: a014ed07 ("memory: accept mismatching sizes in memory_region_access_valid") Signed-off-by: NMichael S. Tsirkin <mst@redhat.com> Message-Id: <20200610134731.1514409-1-mst@redhat.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Paolo Bonzini 提交于
The memory region ops have min_access_size == 4 so obey it. Tested-by: NThomas Huth <thuth@redhat.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Paolo Bonzini 提交于
The memory region ops have min_access_size == 4 so obey it. Tested-by: NThomas Huth <thuth@redhat.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 David CARLIER 提交于
From d7f9d40777d1ed7c9450b0be4f957da2993dfc72 Mon Sep 17 00:00:00 2001 From: David Carlier <devnexen@gmail.com> Date: Fri, 12 Jun 2020 09:39:17 +0100 Subject: [PATCH] util/getauxval: Porting to FreeBSD getauxval feature FreeBSD has a similar API for auxiliary vector. Signed-off-by: NDavid Carlier <devnexen@gmail.com> Message-Id: <CA+XhMqxTU6PUSQBpbA9VrS1QZfqgrCAKUCtUF-x2aF=fCMTDOw@mail.gmail.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Jay Zhou 提交于
Since the new capability KVM_DIRTY_LOG_INITIALLY_SET of KVM_CAP_MANUAL_DIRTY_LOG_PROTECT2 has been introduced in the kernel, tweak the userspace side to detect and enable this capability. Signed-off-by: NJay Zhou <jianjay.zhou@huawei.com> Reviewed-by: NPeter Xu <peterx@redhat.com> Message-Id: <20200304025554.2159-1-jianjay.zhou@huawei.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Peter Maydell 提交于
target/xtensa fixes for 5.1: - fix access to special registers missing in the core configuration; - fix simcall opcode behavior for new hardware; - drop gen_io_end call from xtensa translator. # gpg: Signature made Thu 25 Jun 2020 09:08:58 BST # gpg: using RSA key 2B67854B98E5327DCDEB17D851F9CC91F83FA044 # gpg: issuer "jcmvbkbc@gmail.com" # gpg: Good signature from "Max Filippov <filippov@cadence.com>" [unknown] # gpg: aka "Max Filippov <max.filippov@cogentembedded.com>" [full] # gpg: aka "Max Filippov <jcmvbkbc@gmail.com>" [full] # Primary key fingerprint: 2B67 854B 98E5 327D CDEB 17D8 51F9 CC91 F83F A044 * remotes/xtensa/tags/20200625-xtensa: target/xtensa: drop gen_io_end call target/xtensa: fix simcall for newer hardware target/xtensa: fetch HW version from configuration overlay target/xtensa: work around missing SR definitions Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
- 25 6月, 2020 21 次提交
-
-
由 Peter Maydell 提交于
virtio,acpi,pci: fixes, cleanups. Fixes, cleanups in ACPI, PCI, virtio. Signed-off-by: NMichael S. Tsirkin <mst@redhat.com> # gpg: Signature made Thu 25 Jun 2020 07:48:47 BST # gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469 # gpg: issuer "mst@redhat.com" # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full] # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full] # Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67 # Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469 * remotes/mst/tags/for_upstream: Rename use_acpi_pci_hotplug to more appropriate use_acpi_hotplug_bridge Stop vhost-user sending uninitialized mmap_offsets docs/specs/tpm: ACPI boot now supported for TPM/ARM arm/acpi: Add the TPM2.0 device under the DSDT acpi: Some build_tpm2() code reshape tests/acpi: update expected data files acpi: q35: drop _SB.PCI0.ISA.LPCD opregion. acpi: drop build_piix4_pm() acpi: drop serial/parallel enable bits from dsdt acpi: simplify build_isa_devices_aml() acpi: factor out fw_cfg_add_acpi_dsdt() acpi: move aml builder code for i8042 (kbd+mouse) device floppy: move cmos_get_fd_drive_type() from pc floppy: make isa_fdc_get_drive_max_chs static acpi: move aml builder code for floppy device acpi: bios-tables-test: show more context on asl diffs qtest: allow DSDT acpi table changes Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Peter Maydell 提交于
Pull request # gpg: Signature made Wed 24 Jun 2020 11:25:27 BST # gpg: using RSA key 8695A8BFD3F97CDAAC35775A9CA4ABB381AB73C8 # gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>" [full] # gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>" [full] # Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35 775A 9CA4 ABB3 81AB 73C8 * remotes/stefanha/tags/tracing-pull-request: trace/simple: Fix unauthorized enable scripts/tracetool: Update maintainer email address Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Peter Maydell 提交于
Qdev patches for 2020-06-23 # gpg: Signature made Tue 23 Jun 2020 15:08:28 BST # gpg: using RSA key 354BC8B3D7EB2A6B68674E5F3870B400EB918653 # gpg: issuer "armbru@redhat.com" # gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full] # gpg: aka "Markus Armbruster <armbru@pond.sub.org>" [full] # Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653 * remotes/armbru/tags/pull-qdev-2020-06-23: sd/milkymist-memcard: Fix error API violation sd/pxa2xx_mmci: Don't crash on pxa2xx_mmci_init() error arm/aspeed: Drop aspeed_board_init_flashes() parameter @errp qdev: Make qdev_prop_set_drive() match the other helpers qdev: Reject chardev property override qdev: Reject drive property override qdev: Improve netdev property override error a bit qdev: Eliminate get_pointer(), set_pointer() blockdev: Deprecate -drive with bogus interface type docs/qdev-device-use.txt: Update section "Default Devices" fdc: Deprecate configuring floppies with -global isa-fdc fdc: Open-code fdctrl_init_isa() fdc: Reject clash between -drive if=floppy and -global isa-fdc iotests/172: Cover -global floppy.drive=... iotests/172: Cover empty filename and multiple use of drives iotests/172: Include "info block" in test output Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Ani Sinha 提交于
Currently, the option use_acpi_pci_hotplug is being used to control device hotplug capability using ACPI for slots of cold plugged bridges. Hence, we are renaming this option to better reflect what it actually does. Signed-off-by: NAni Sinha <ani.sinha@nutanix.com> Message-Id: <1592310699-58916-1-git-send-email-ani.sinha@nutanix.com> Reviewed-by: NIgor Mammedov <imammedo@redhat.com> Signed-off-by: NAni Sinha <ani.sinha@nutanix.com> Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
由 Raphael Norwitz 提交于
Prior to this change, the vhost_user_fill_msg_region function filled out all elements of the VhostUserMemoryRegion struct except the mmap_offset. This function is often called on uninitialized structs, which are then copied into VHOST_USER_SET_MEM_TABLE and VHOST_USER_ADD/REM_MEM_REG messages. In some cases, where the mmap_offset was not needed, it was left uninitialized, causing QEMU to send the backend uninitialized data, which Coverity flagged as a series of issues. This change augments the vhost_user_fill_msg_region API, adding a mmap_offset paramenter, forcing the caller to initialize mmap_offset. Fixes: ece99091 Fixes: f1aeb14b Reported-by: Coverity (CIDs 1429802, 1429803 and 1429804) Suggested-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NRaphael Norwitz <raphael.norwitz@nutanix.com> Message-Id: <1592650156-25845-1-git-send-email-raphael.norwitz@nutanix.com> Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com> Reviewed-by: NPeter Maydell <peter.maydell@linaro.org> Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 Eric Auger 提交于
ACPI boot now is supported. Let's remove the comment saying it is not. Signed-off-by: NEric Auger <eric.auger@redhat.com> Reviewed-by: NStefan Berger <stefanb@linux.ibm.com> Reviewed-by: NIgor Mammedov <imammedo@redhat.com> Message-Id: <20200622140620.17229-4-eric.auger@redhat.com> Tested-by: NArd Biesheuvel <ardb@kernel.org> Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
由 Eric Auger 提交于
In case it is dynamically instantiated, add the TPM 2.0 device object under the DSDT table in the ACPI namespace. Its HID is MSFT0101 while its current resource settings (CRS) property is initialized with the guest physical address and MMIO size of the device. Signed-off-by: NEric Auger <eric.auger@redhat.com> Reviewed-by: NStefan Berger <stefanb@linux.ibm.com> Reviewed-by: NIgor Mammedov <imammedo@redhat.com> Message-Id: <20200622140620.17229-3-eric.auger@redhat.com> Tested-by: NArd Biesheuvel <ardb@kernel.org> Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
由 Eric Auger 提交于
Remove any reference to Acpi20TPM2 and adopt an implementation similar to build_ghes_v2(). Signed-off-by: NEric Auger <eric.auger@redhat.com> Suggested-by: NIgor Mammedov <imammedo@redhat.com> Reviewed-by: NStefan Berger <stefanb@linux.ibm.com> Tested-by: NStefan Berger <stefanb@linux.ibm.com> Reviewed-by: NIgor Mammedov <imammedo@redhat.com> Message-Id: <20200622140620.17229-2-eric.auger@redhat.com> Tested-by: NArd Biesheuvel <ardb@kernel.org> Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
由 Gerd Hoffmann 提交于
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Message-Id: <20200619091905.21676-13-kraxel@redhat.com> Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
由 Gerd Hoffmann 提交于
Seems to be unused. ich9 DSDT changes: Scope (_SB.PCI0) { Device (ISA) { Name (_ADR, 0x001F0000) // _ADR: Address OperationRegion (PIRQ, PCI_Config, 0x60, 0x0C) - OperationRegion (LPCD, PCI_Config, 0x80, 0x02) - Field (LPCD, AnyAcc, NoLock, Preserve) - { - COMA, 3, - , 1, - COMB, 3, - Offset (0x01), - LPTD, 2 - } } } Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Reviewed-by: NIgor Mammedov <imammedo@redhat.com> Message-Id: <20200619091905.21676-12-kraxel@redhat.com> Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
由 Gerd Hoffmann 提交于
The _SB.PCI0.PX13.P13C opregion (holds isa device enable bits) is not used any more, remove it from DSDT. piix4 DSDT changes: Scope (_SB.PCI0) { - Device (PX13) - { - Name (_ADR, 0x00010003) // _ADR: Address - OperationRegion (P13C, PCI_Config, Zero, 0xFF) - } - } - - Scope (_SB.PCI0) - { Device (ISA) { Name (_ADR, 0x00010000) // _ADR: Address OperationRegion (P40C, PCI_Config, 0x60, 0x04) } } Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Reviewed-by: NIgor Mammedow <imammedo@redhat.com> Message-Id: <20200619091905.21676-11-kraxel@redhat.com> Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
由 Gerd Hoffmann 提交于
The _STA methods for COM+LPT used to reference them, but that isn't the case any more. piix4 DSDT changes: Scope (_SB.PCI0) { Device (ISA) { Name (_ADR, 0x00010000) // _ADR: Address OperationRegion (P40C, PCI_Config, 0x60, 0x04) - Field (^PX13.P13C, AnyAcc, NoLock, Preserve) - { - Offset (0x5F), - , 7, - LPEN, 1, - Offset (0x67), - , 3, - CAEN, 1, - , 3, - CBEN, 1 - } } } ich9 DSDT changes: Scope (_SB.PCI0) { Device (ISA) { Name (_ADR, 0x001F0000) // _ADR: Address OperationRegion (PIRQ, PCI_Config, 0x60, 0x0C) OperationRegion (LPCD, PCI_Config, 0x80, 0x02) Field (LPCD, AnyAcc, NoLock, Preserve) { COMA, 3, , 1, COMB, 3, Offset (0x01), LPTD, 2 } - - OperationRegion (LPCE, PCI_Config, 0x82, 0x02) - Field (LPCE, AnyAcc, NoLock, Preserve) - { - CAEN, 1, - CBEN, 1, - LPEN, 1 - } } } Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Reviewed-by: NIgor Mammedov <imammedo@redhat.com> Message-Id: <20200619091905.21676-10-kraxel@redhat.com> Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
由 Gerd Hoffmann 提交于
x86 machines can have a single ISA bus only. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Reviewed-by: NIgor Mammedov <imammedo@redhat.com> Reviewed-by: NPhilippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20200619091905.21676-9-kraxel@redhat.com> Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
由 Gerd Hoffmann 提交于
Add helper function to add fw_cfg device, also move code to hw/i386/fw_cfg.c. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Reviewed-by: NPhilippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: NIgor Mammedov <imammedo@redhat.com> Message-Id: <20200619091905.21676-8-kraxel@redhat.com> Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
由 Gerd Hoffmann 提交于
DSDT change: isa device order changes in case MI1 (ipmi) is present. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Reviewed-by: NPhilippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: NIgor Mammedov <imammedo@redhat.com> Message-Id: <20200619091905.21676-7-kraxel@redhat.com> Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
由 Gerd Hoffmann 提交于
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Reviewed-by: NPhilippe Mathieu-Daudé <philmd@redhat.com> Acked-by: NJohn Snow <jsnow@redhat.com> Message-Id: <20200619091905.21676-6-kraxel@redhat.com> Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
由 Gerd Hoffmann 提交于
acpi aml generator needs this, but it is in floppy code now so we can make the function static. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Reviewed-by: NIgor Mammedov <imammedo@redhat.com> Reviewed-by: NPhilippe Mathieu-Daudé <philmd@redhat.com> Acked-by: NJohn Snow <jsnow@redhat.com> Message-Id: <20200619091905.21676-5-kraxel@redhat.com> Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
由 Gerd Hoffmann 提交于
DSDT change: isa device order changes in case MI1 (ipmi) is present. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Reviewed-by: NIgor Mammedov <imammedo@redhat.com> Message-Id: <20200619091905.21676-4-kraxel@redhat.com> Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
由 Gerd Hoffmann 提交于
Makes it easier to create good commit messages from the logs. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Reviewed-by: NPhilippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20200619091905.21676-3-kraxel@redhat.com> Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
由 Gerd Hoffmann 提交于
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Message-Id: <20200619091905.21676-2-kraxel@redhat.com> Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
由 Peter Maydell 提交于
Merge tpm 2020/06/23 v1 # gpg: Signature made Tue 23 Jun 2020 12:35:03 BST # gpg: using RSA key B818B9CADF9089C2D5CEC66B75AD65802A0B4211 # gpg: Good signature from "Stefan Berger <stefanb@linux.vnet.ibm.com>" [unknown] # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: B818 B9CA DF90 89C2 D5CE C66B 75AD 6580 2A0B 4211 * remotes/stefanberger/tags/pull-tpm-2020-06-23-1: tpm: Move backend code under the 'backends/' directory hw/tpm: Make 'tpm_util.h' publicly accessible as "sysemu/tpm_util.h" hw/tpm: Move DEFINE_PROP_TPMBE() macro to 'tmp_prop.h' local header hw/tpm: Move few declarations from 'tpm_util.h' to 'tpm_int.h' hw/tpm: Make TRACE_TPM_UTIL_SHOW_BUFFER check local to tpm_util.c hw/tpm: Remove unnecessary 'tpm_int.h' header inclusion hw/tpm: Move 'hw/acpi/tpm.h' inclusion from header to sources hw/tpm: Include missing 'qemu/option.h' header hw/tpm: Do not include 'qemu/osdep.h' in header hw/tpm: Rename TPMDEV as TPM_BACKEND in Kconfig backends: Add TPM files into their own directory docs/specs/tpm: Correct header path name Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
- 24 6月, 2020 2 次提交
-
-
由 Markus Armbruster 提交于
st_set_trace_file() accidentally enables tracing. It's called unconditionally during startup, which is why QEMU built with the simple trace backend always writes a trace file "trace-$PID". This has been broken for quite a while. I didn't track down the exact commit. Fix st_set_trace_file() to restore the state. Signed-off-by: NMarkus Armbruster <armbru@redhat.com> Reviewed-by: NPhilippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20200527065613.25322-1-armbru@redhat.com Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 Philippe Mathieu-Daudé 提交于
There is an effort in progress to generate a QEMU Python package. As I'm not sure this old email is still valid, update it to not produce package with broken maintainer email. Patch created mechanically by running: $ sed -i 's,\(__email__ *= "\)stefanha@linux.vnet.ibm.com",\1stefanha@redhat.com",' \ $(git grep -l 'email.*stefanha@linux.vnet.ibm.com') Signed-off-by: NPhilippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: NJohn Snow <jsnow@redhat.com> Message-id: 20200511082816.696-1-philmd@redhat.com Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-