提交 0575c2fd 编写于 作者: G Gerd Hoffmann 提交者: Michael S. Tsirkin

acpi: factor out fw_cfg_add_acpi_dsdt()

Add helper function to add fw_cfg device,
also move code to hw/i386/fw_cfg.c.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Reviewed-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: NIgor Mammedov <imammedo@redhat.com>
Message-Id: <20200619091905.21676-8-kraxel@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
上级 df0f3d13
......@@ -1802,30 +1802,8 @@ build_dsdt(GArray *table_data, BIOSLinker *linker,
/* create fw_cfg node, unconditionally */
{
/* when using port i/o, the 8-bit data register *always* overlaps
* with half of the 16-bit control register. Hence, the total size
* of the i/o region used is FW_CFG_CTL_SIZE; when using DMA, the
* DMA control register is located at FW_CFG_DMA_IO_BASE + 4 */
uint8_t io_size = object_property_get_bool(OBJECT(x86ms->fw_cfg),
"dma_enabled", NULL) ?
ROUND_UP(FW_CFG_CTL_SIZE, 4) + sizeof(dma_addr_t) :
FW_CFG_CTL_SIZE;
scope = aml_scope("\\_SB.PCI0");
dev = aml_device("FWCF");
aml_append(dev, aml_name_decl("_HID", aml_string("QEMU0002")));
/* device present, functioning, decoding, not shown in UI */
aml_append(dev, aml_name_decl("_STA", aml_int(0xB)));
crs = aml_resource_template();
aml_append(crs,
aml_io(AML_DECODE16, FW_CFG_IO_BASE, FW_CFG_IO_BASE, 0x01, io_size)
);
aml_append(dev, aml_name_decl("_CRS", crs));
aml_append(scope, dev);
fw_cfg_add_acpi_dsdt(scope, x86ms->fw_cfg);
aml_append(dsdt, scope);
}
......
......@@ -15,6 +15,7 @@
#include "qemu/osdep.h"
#include "sysemu/numa.h"
#include "hw/acpi/acpi.h"
#include "hw/acpi/aml-build.h"
#include "hw/firmware/smbios.h"
#include "hw/i386/fw_cfg.h"
#include "hw/timer/hpet.h"
......@@ -179,3 +180,30 @@ void fw_cfg_build_feature_control(MachineState *ms, FWCfgState *fw_cfg)
*val = cpu_to_le64(feature_control_bits | FEATURE_CONTROL_LOCKED);
fw_cfg_add_file(fw_cfg, "etc/msr_feature_control", val, sizeof(*val));
}
void fw_cfg_add_acpi_dsdt(Aml *scope, FWCfgState *fw_cfg)
{
/*
* when using port i/o, the 8-bit data register *always* overlaps
* with half of the 16-bit control register. Hence, the total size
* of the i/o region used is FW_CFG_CTL_SIZE; when using DMA, the
* DMA control register is located at FW_CFG_DMA_IO_BASE + 4
*/
Object *obj = OBJECT(fw_cfg);
uint8_t io_size = object_property_get_bool(obj, "dma_enabled", NULL) ?
ROUND_UP(FW_CFG_CTL_SIZE, 4) + sizeof(dma_addr_t) :
FW_CFG_CTL_SIZE;
Aml *dev = aml_device("FWCF");
Aml *crs = aml_resource_template();
aml_append(dev, aml_name_decl("_HID", aml_string("QEMU0002")));
/* device present, functioning, decoding, not shown in UI */
aml_append(dev, aml_name_decl("_STA", aml_int(0xB)));
aml_append(crs,
aml_io(AML_DECODE16, FW_CFG_IO_BASE, FW_CFG_IO_BASE, 0x01, io_size));
aml_append(dev, aml_name_decl("_CRS", crs));
aml_append(scope, dev);
}
......@@ -25,5 +25,6 @@ FWCfgState *fw_cfg_arch_create(MachineState *ms,
uint16_t apic_id_limit);
void fw_cfg_build_smbios(MachineState *ms, FWCfgState *fw_cfg);
void fw_cfg_build_feature_control(MachineState *ms, FWCfgState *fw_cfg);
void fw_cfg_add_acpi_dsdt(Aml *scope, FWCfgState *fw_cfg);
#endif
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册