提交 83bad1d7 编写于 作者: A Adrian Bunk 提交者: Linus Torvalds

scheduled OSS driver removal

This patch contains the scheduled removal of OSS drivers whose config
options have been removed in 2.6.23.
Signed-off-by: NAdrian Bunk <bunk@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
上级 b4cf9c34
......@@ -208,13 +208,6 @@ Who: Randy Dunlap <randy.dunlap@oracle.com>
---------------------------
What: drivers depending on OSS_OBSOLETE
When: options in 2.6.23, code in 2.6.25
Why: obsolete OSS drivers
Who: Adrian Bunk <bunk@stusta.de>
---------------------------
What: libata spindown skipping and warning
When: Dec 2008
Why: Some halt(8) implementations synchronize caches for and spin
......
......@@ -91,20 +91,11 @@ extern void prep_tiger1_setup_pci(char *irq_edge_mask_lo, char *irq_edge_mask_hi
#define cached_21 (((char *)(ppc_cached_irq_mask))[3])
#define cached_A1 (((char *)(ppc_cached_irq_mask))[2])
#ifdef CONFIG_SOUND_CS4232
long ppc_cs4232_dma, ppc_cs4232_dma2;
#endif
extern PTE *Hash, *Hash_end;
extern unsigned long Hash_size, Hash_mask;
extern int probingmem;
extern unsigned long loops_per_jiffy;
#ifdef CONFIG_SOUND_CS4232
EXPORT_SYMBOL(ppc_cs4232_dma);
EXPORT_SYMBOL(ppc_cs4232_dma2);
#endif
/* useful ISA ports */
#define PREP_SYSCTL 0x81c
/* present in the IBM reference design; possibly identical in Mot boxes: */
......@@ -569,74 +560,6 @@ prep_show_percpuinfo(struct seq_file *m, int i)
return 0;
}
#ifdef CONFIG_SOUND_CS4232
static long __init masktoint(unsigned int i)
{
int t = -1;
while (i >> ++t)
;
return (t-1);
}
/*
* ppc_cs4232_dma and ppc_cs4232_dma2 are used in include/asm/dma.h
* to distinguish sound dma-channels from others. This is because
* blocksize on 16 bit dma-channels 5,6,7 is 128k, but
* the cs4232.c uses 64k like on 8 bit dma-channels 0,1,2,3
*/
static void __init prep_init_sound(void)
{
PPC_DEVICE *audiodevice = NULL;
/*
* Get the needed resource information from residual data.
*
*/
if (have_residual_data)
audiodevice = residual_find_device(~0, NULL,
MultimediaController, AudioController, -1, 0);
if (audiodevice != NULL) {
PnP_TAG_PACKET *pkt;
pkt = PnP_find_packet((unsigned char *)&res->DevicePnPHeap[audiodevice->AllocatedOffset],
S5_Packet, 0);
if (pkt != NULL)
ppc_cs4232_dma = masktoint(pkt->S5_Pack.DMAMask);
pkt = PnP_find_packet((unsigned char*)&res->DevicePnPHeap[audiodevice->AllocatedOffset],
S5_Packet, 1);
if (pkt != NULL)
ppc_cs4232_dma2 = masktoint(pkt->S5_Pack.DMAMask);
}
/*
* These are the PReP specs' defaults for the cs4231. We use these
* as fallback incase we don't have residual data.
* At least the IBM Thinkpad 850 with IDE DMA Channels at 6 and 7
* will use the other values.
*/
if (audiodevice == NULL) {
switch (_prep_type) {
case _PREP_IBM:
ppc_cs4232_dma = 1;
ppc_cs4232_dma2 = -1;
break;
default:
ppc_cs4232_dma = 6;
ppc_cs4232_dma2 = 7;
}
}
/*
* Find a way to push this information to the cs4232 driver
* Give it out with printk, when not in cmd_line?
* Append it to cmd_line and boot_command_line?
* Format is cs4232=io,irq,dma,dma2
*/
}
#endif /* CONFIG_SOUND_CS4232 */
/*
* Fill out screen_info according to the residual data. This allows us to use
* at least vesafb.
......@@ -898,10 +821,6 @@ prep_setup_arch(void)
}
}
#ifdef CONFIG_SOUND_CS4232
prep_init_sound();
#endif /* CONFIG_SOUND_CS4232 */
prep_init_vesa();
switch (_prep_type) {
......
......@@ -22,7 +22,6 @@ obj-$(CONFIG_VIDEO_IR_I2C) += ir-kbd-i2c.o
obj-$(CONFIG_VIDEO_TVAUDIO) += tvaudio.o
obj-$(CONFIG_VIDEO_TDA7432) += tda7432.o
obj-$(CONFIG_VIDEO_TDA9875) += tda9875.o
obj-$(CONFIG_SOUND_TVMIXER) += tvmixer.o
obj-$(CONFIG_VIDEO_SAA6588) += saa6588.o
obj-$(CONFIG_VIDEO_SAA5246A) += saa5246a.o
......
/*
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/string.h>
#include <linux/timer.h>
#include <linux/delay.h>
#include <linux/errno.h>
#include <linux/slab.h>
#include <linux/i2c.h>
#include <linux/videodev.h>
#include <linux/init.h>
#include <linux/kdev_t.h>
#include <linux/sound.h>
#include <linux/soundcard.h>
#include <asm/semaphore.h>
#include <asm/uaccess.h>
#define DEV_MAX 4
static int devnr = -1;
module_param(devnr, int, 0644);
MODULE_AUTHOR("Gerd Knorr");
MODULE_LICENSE("GPL");
/* ----------------------------------------------------------------------- */
struct TVMIXER {
struct i2c_client *dev;
int minor;
int count;
};
static struct TVMIXER devices[DEV_MAX];
static int tvmixer_adapters(struct i2c_adapter *adap);
static int tvmixer_clients(struct i2c_client *client);
/* ----------------------------------------------------------------------- */
static int mix_to_v4l(int i)
{
int r;
r = ((i & 0xff) * 65536 + 50) / 100;
if (r > 65535) r = 65535;
if (r < 0) r = 0;
return r;
}
static int v4l_to_mix(int i)
{
int r;
r = (i * 100 + 32768) / 65536;
if (r > 100) r = 100;
if (r < 0) r = 0;
return r | (r << 8);
}
static int v4l_to_mix2(int l, int r)
{
r = (r * 100 + 32768) / 65536;
if (r > 100) r = 100;
if (r < 0) r = 0;
l = (l * 100 + 32768) / 65536;
if (l > 100) l = 100;
if (l < 0) l = 0;
return (r << 8) | l;
}
static int tvmixer_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg)
{
struct video_audio va;
int left,right,ret,val = 0;
struct TVMIXER *mix = file->private_data;
struct i2c_client *client = mix->dev;
void __user *argp = (void __user *)arg;
int __user *p = argp;
if (NULL == client)
return -ENODEV;
if (cmd == SOUND_MIXER_INFO) {
mixer_info info;
strlcpy(info.id, "tv card", sizeof(info.id));
strlcpy(info.name, client->name, sizeof(info.name));
info.modify_counter = 42 /* FIXME */;
if (copy_to_user(argp, &info, sizeof(info)))
return -EFAULT;
return 0;
}
if (cmd == SOUND_OLD_MIXER_INFO) {
_old_mixer_info info;
strlcpy(info.id, "tv card", sizeof(info.id));
strlcpy(info.name, client->name, sizeof(info.name));
if (copy_to_user(argp, &info, sizeof(info)))
return -EFAULT;
return 0;
}
if (cmd == OSS_GETVERSION)
return put_user(SOUND_VERSION, p);
if (_SIOC_DIR(cmd) & _SIOC_WRITE)
if (get_user(val, p))
return -EFAULT;
/* read state */
memset(&va,0,sizeof(va));
client->driver->command(client,VIDIOCGAUDIO,&va);
switch (cmd) {
case MIXER_READ(SOUND_MIXER_RECMASK):
case MIXER_READ(SOUND_MIXER_CAPS):
case MIXER_READ(SOUND_MIXER_RECSRC):
case MIXER_WRITE(SOUND_MIXER_RECSRC):
ret = 0;
break;
case MIXER_READ(SOUND_MIXER_STEREODEVS):
ret = SOUND_MASK_VOLUME;
break;
case MIXER_READ(SOUND_MIXER_DEVMASK):
ret = SOUND_MASK_VOLUME;
if (va.flags & VIDEO_AUDIO_BASS)
ret |= SOUND_MASK_BASS;
if (va.flags & VIDEO_AUDIO_TREBLE)
ret |= SOUND_MASK_TREBLE;
break;
case MIXER_WRITE(SOUND_MIXER_VOLUME):
left = mix_to_v4l(val);
right = mix_to_v4l(val >> 8);
va.volume = max(left,right);
va.balance = (32768*min(left,right)) / (va.volume ? va.volume : 1);
va.balance = (left<right) ? (65535-va.balance) : va.balance;
if (va.volume)
va.flags &= ~VIDEO_AUDIO_MUTE;
client->driver->command(client,VIDIOCSAUDIO,&va);
client->driver->command(client,VIDIOCGAUDIO,&va);
/* fall throuth */
case MIXER_READ(SOUND_MIXER_VOLUME):
left = (min(65536 - va.balance,32768) *
va.volume) / 32768;
right = (min(va.balance,(u16)32768) *
va.volume) / 32768;
ret = v4l_to_mix2(left,right);
break;
case MIXER_WRITE(SOUND_MIXER_BASS):
va.bass = mix_to_v4l(val);
client->driver->command(client,VIDIOCSAUDIO,&va);
client->driver->command(client,VIDIOCGAUDIO,&va);
/* fall throuth */
case MIXER_READ(SOUND_MIXER_BASS):
ret = v4l_to_mix(va.bass);
break;
case MIXER_WRITE(SOUND_MIXER_TREBLE):
va.treble = mix_to_v4l(val);
client->driver->command(client,VIDIOCSAUDIO,&va);
client->driver->command(client,VIDIOCGAUDIO,&va);
/* fall throuth */
case MIXER_READ(SOUND_MIXER_TREBLE):
ret = v4l_to_mix(va.treble);
break;
default:
return -EINVAL;
}
if (put_user(ret, p))
return -EFAULT;
return 0;
}
static int tvmixer_open(struct inode *inode, struct file *file)
{
int i, minor = iminor(inode);
struct TVMIXER *mix = NULL;
struct i2c_client *client = NULL;
for (i = 0; i < DEV_MAX; i++) {
if (devices[i].minor == minor) {
mix = devices+i;
client = mix->dev;
break;
}
}
if (NULL == client)
return -ENODEV;
/* lock bttv in memory while the mixer is in use */
file->private_data = mix;
if (client->adapter->owner)
try_module_get(client->adapter->owner);
return 0;
}
static int tvmixer_release(struct inode *inode, struct file *file)
{
struct TVMIXER *mix = file->private_data;
struct i2c_client *client;
client = mix->dev;
if (NULL == client) {
return -ENODEV;
}
module_put(client->adapter->owner);
return 0;
}
static struct i2c_driver driver = {
.driver = {
.name = "tvmixer",
},
.id = I2C_DRIVERID_TVMIXER,
.detach_adapter = tvmixer_adapters,
.attach_adapter = tvmixer_adapters,
.detach_client = tvmixer_clients,
};
static const struct file_operations tvmixer_fops = {
.owner = THIS_MODULE,
.llseek = no_llseek,
.ioctl = tvmixer_ioctl,
.open = tvmixer_open,
.release = tvmixer_release,
};
/* ----------------------------------------------------------------------- */
static int tvmixer_adapters(struct i2c_adapter *adap)
{
struct i2c_client *client;
list_for_each_entry(client, &adap->clients, list)
tvmixer_clients(client);
return 0;
}
static int tvmixer_clients(struct i2c_client *client)
{
struct video_audio va;
int i,minor;
if (!(client->adapter->class & I2C_CLASS_TV_ANALOG))
return -1;
/* unregister ?? */
for (i = 0; i < DEV_MAX; i++) {
if (devices[i].dev == client) {
/* unregister */
unregister_sound_mixer(devices[i].minor);
devices[i].dev = NULL;
devices[i].minor = -1;
printk("tvmixer: %s unregistered (#1)\n",
client->name);
return 0;
}
}
/* look for a free slot */
for (i = 0; i < DEV_MAX; i++)
if (NULL == devices[i].dev)
break;
if (i == DEV_MAX) {
printk(KERN_WARNING "tvmixer: DEV_MAX too small\n");
return -1;
}
/* audio chip with mixer ??? */
if (NULL == client->driver->command)
return -1;
memset(&va,0,sizeof(va));
if (0 != client->driver->command(client,VIDIOCGAUDIO,&va))
return -1;
if (0 == (va.flags & VIDEO_AUDIO_VOLUME))
return -1;
/* everything is fine, register */
if ((minor = register_sound_mixer(&tvmixer_fops,devnr)) < 0) {
printk(KERN_ERR "tvmixer: cannot allocate mixer device\n");
return -1;
}
devices[i].minor = minor;
devices[i].count = 0;
devices[i].dev = client;
printk("tvmixer: %s (%s) registered with minor %d\n",
client->name,client->adapter->name,minor);
return 0;
}
/* ----------------------------------------------------------------------- */
static int __init tvmixer_init_module(void)
{
int i;
for (i = 0; i < DEV_MAX; i++)
devices[i].minor = -1;
return i2c_add_driver(&driver);
}
static void __exit tvmixer_cleanup_module(void)
{
int i;
i2c_del_driver(&driver);
for (i = 0; i < DEV_MAX; i++) {
if (devices[i].minor != -1) {
unregister_sound_mixer(devices[i].minor);
printk("tvmixer: %s unregistered (#2)\n",
devices[i].dev->name);
}
}
}
module_init(tvmixer_init_module);
module_exit(tvmixer_cleanup_module);
/*
* Overrides for Emacs so that we follow Linus's tabbing style.
* ---------------------------------------------------------------------------
* Local variables:
* c-basic-offset: 8
* End:
*/
......@@ -93,16 +93,6 @@
*
*/
/* see prep_setup_arch() for detailed informations */
#if defined(CONFIG_SOUND_CS4232) && defined(CONFIG_PPC_PREP)
extern long ppc_cs4232_dma, ppc_cs4232_dma2;
#define SND_DMA1 ppc_cs4232_dma
#define SND_DMA2 ppc_cs4232_dma2
#else
#define SND_DMA1 -1
#define SND_DMA2 -1
#endif
/* 8237 DMA controllers */
#define IO_DMA1_BASE 0x00 /* 8 bit slave DMA, channels 0..3 */
#define IO_DMA2_BASE 0xC0 /* 16 bit master DMA, ch 4(=slave input)..7 */
......@@ -269,24 +259,15 @@ static __inline__ void set_dma_page(unsigned int dmanr, int pagenr)
dma_outb(pagenr >> 8, DMA_HI_PAGE_3);
break;
case 5:
if (SND_DMA1 == 5 || SND_DMA2 == 5)
dma_outb(pagenr, DMA_LO_PAGE_5);
else
dma_outb(pagenr & 0xfe, DMA_LO_PAGE_5);
dma_outb(pagenr & 0xfe, DMA_LO_PAGE_5);
dma_outb(pagenr >> 8, DMA_HI_PAGE_5);
break;
case 6:
if (SND_DMA1 == 6 || SND_DMA2 == 6)
dma_outb(pagenr, DMA_LO_PAGE_6);
else
dma_outb(pagenr & 0xfe, DMA_LO_PAGE_6);
dma_outb(pagenr & 0xfe, DMA_LO_PAGE_6);
dma_outb(pagenr >> 8, DMA_HI_PAGE_6);
break;
case 7:
if (SND_DMA1 == 7 || SND_DMA2 == 7)
dma_outb(pagenr, DMA_LO_PAGE_7);
else
dma_outb(pagenr & 0xfe, DMA_LO_PAGE_7);
dma_outb(pagenr & 0xfe, DMA_LO_PAGE_7);
dma_outb(pagenr >> 8, DMA_HI_PAGE_7);
break;
}
......@@ -302,12 +283,6 @@ static __inline__ void set_dma_addr(unsigned int dmanr, unsigned int phys)
((dmanr & 3) << 1) + IO_DMA1_BASE);
dma_outb((phys >> 8) & 0xff,
((dmanr & 3) << 1) + IO_DMA1_BASE);
} else if (dmanr == SND_DMA1 || dmanr == SND_DMA2) {
dma_outb(phys & 0xff,
((dmanr & 3) << 2) + IO_DMA2_BASE);
dma_outb((phys >> 8) & 0xff,
((dmanr & 3) << 2) + IO_DMA2_BASE);
dma_outb((dmanr & 3), DMA2_EXT_REG);
} else {
dma_outb((phys >> 1) & 0xff,
((dmanr & 3) << 2) + IO_DMA2_BASE);
......@@ -334,11 +309,6 @@ static __inline__ void set_dma_count(unsigned int dmanr, unsigned int count)
((dmanr & 3) << 1) + 1 + IO_DMA1_BASE);
dma_outb((count >> 8) & 0xff,
((dmanr & 3) << 1) + 1 + IO_DMA1_BASE);
} else if (dmanr == SND_DMA1 || dmanr == SND_DMA2) {
dma_outb(count & 0xff,
((dmanr & 3) << 2) + 2 + IO_DMA2_BASE);
dma_outb((count >> 8) & 0xff,
((dmanr & 3) << 2) + 2 + IO_DMA2_BASE);
} else {
dma_outb((count >> 1) & 0xff,
((dmanr & 3) << 2) + 2 + IO_DMA2_BASE);
......@@ -368,8 +338,7 @@ static __inline__ int get_dma_residue(unsigned int dmanr)
count = 1 + dma_inb(io_port);
count += dma_inb(io_port) << 8;
return (dmanr <= 3 || dmanr == SND_DMA1 || dmanr == SND_DMA2)
? count : (count << 1);
return (dmanr <= 3) ? count : (count << 1);
}
/* These are in kernel/dma.c: */
......
......@@ -326,11 +326,7 @@ struct ac97_ops
#define AC97_DEFAULT_POWER_OFF 4 /* Needs warm reset to power up */
};
extern int ac97_read_proc (char *page_out, char **start, off_t off,
int count, int *eof, void *data);
extern int ac97_probe_codec(struct ac97_codec *);
extern unsigned int ac97_set_adc_rate(struct ac97_codec *codec, unsigned int rate);
extern unsigned int ac97_set_dac_rate(struct ac97_codec *codec, unsigned int rate);
extern struct ac97_codec *ac97_alloc_codec(void);
extern void ac97_release_codec(struct ac97_codec *codec);
......@@ -363,7 +359,4 @@ struct ac97_quirk {
int type; /* quirk type above */
};
struct pci_dev;
extern int ac97_tune_hardware(struct pci_dev *pdev, struct ac97_quirk *quirk, int override);
#endif /* _AC97_CODEC_H_ */
......@@ -6,7 +6,6 @@
# Each configuration option enables a list of files.
obj-$(CONFIG_SOUND_OSS) += sound.o
obj-$(CONFIG_SOUND_CS4232) += cs4232.o ad1848.o
# Please leave it as is, cause the link order is significant !
......@@ -16,7 +15,6 @@ obj-$(CONFIG_SOUND_AEDSP16) += aedsp16.o
obj-$(CONFIG_SOUND_PSS) += pss.o ad1848.o mpu401.o
obj-$(CONFIG_SOUND_TRIX) += trix.o ad1848.o sb_lib.o uart401.o
obj-$(CONFIG_SOUND_SSCAPE) += sscape.o ad1848.o mpu401.o
obj-$(CONFIG_SOUND_CS4232) += cs4232.o uart401.o
obj-$(CONFIG_SOUND_MSS) += ad1848.o
obj-$(CONFIG_SOUND_PAS) += pas2.o sb.o sb_lib.o uart401.o
obj-$(CONFIG_SOUND_SB) += sb.o sb_lib.o uart401.o
......@@ -27,19 +25,12 @@ obj-$(CONFIG_SOUND_YM3812) += opl3.o
obj-$(CONFIG_SOUND_VMIDI) += v_midi.o
obj-$(CONFIG_SOUND_VIDC) += vidc_mod.o
obj-$(CONFIG_SOUND_WAVEARTIST) += waveartist.o
obj-$(CONFIG_SOUND_VIA82CXXX) += via82cxxx_audio.o ac97_codec.o
ifeq ($(CONFIG_MIDI_VIA82CXXX),y)
obj-$(CONFIG_SOUND_VIA82CXXX) += sound.o uart401.o
endif
obj-$(CONFIG_SOUND_MSNDCLAS) += msnd.o msnd_classic.o
obj-$(CONFIG_SOUND_MSNDPIN) += msnd.o msnd_pinnacle.o
obj-$(CONFIG_SOUND_VWSND) += vwsnd.o
obj-$(CONFIG_SOUND_ICH) += i810_audio.o ac97_codec.o
obj-$(CONFIG_SOUND_AU1550_AC97) += au1550_ac97.o ac97_codec.o
obj-$(CONFIG_SOUND_TRIDENT) += trident.o ac97_codec.o
obj-$(CONFIG_SOUND_BCM_CS4297A) += swarm_cs4297a.o
obj-$(CONFIG_SOUND_BT878) += btaudio.o
obj-$(CONFIG_SOUND_WM97XX) += ac97_plugin_wm97xx.o
......
......@@ -189,42 +189,6 @@ static const struct {
{0x57454301, "Winbond 83971D", &null_ops},
};
static const char *ac97_stereo_enhancements[] =
{
/* 0 */ "No 3D Stereo Enhancement",
/* 1 */ "Analog Devices Phat Stereo",
/* 2 */ "Creative Stereo Enhancement",
/* 3 */ "National Semi 3D Stereo Enhancement",
/* 4 */ "YAMAHA Ymersion",
/* 5 */ "BBE 3D Stereo Enhancement",
/* 6 */ "Crystal Semi 3D Stereo Enhancement",
/* 7 */ "Qsound QXpander",
/* 8 */ "Spatializer 3D Stereo Enhancement",
/* 9 */ "SRS 3D Stereo Enhancement",
/* 10 */ "Platform Tech 3D Stereo Enhancement",
/* 11 */ "AKM 3D Audio",
/* 12 */ "Aureal Stereo Enhancement",
/* 13 */ "Aztech 3D Enhancement",
/* 14 */ "Binaura 3D Audio Enhancement",
/* 15 */ "ESS Technology Stereo Enhancement",
/* 16 */ "Harman International VMAx",
/* 17 */ "Nvidea 3D Stereo Enhancement",
/* 18 */ "Philips Incredible Sound",
/* 19 */ "Texas Instruments 3D Stereo Enhancement",
/* 20 */ "VLSI Technology 3D Stereo Enhancement",
/* 21 */ "TriTech 3D Stereo Enhancement",
/* 22 */ "Realtek 3D Stereo Enhancement",
/* 23 */ "Samsung 3D Stereo Enhancement",
/* 24 */ "Wolfson Microelectronics 3D Enhancement",
/* 25 */ "Delta Integration 3D Enhancement",
/* 26 */ "SigmaTel 3D Enhancement",
/* 27 */ "Winbond 3D Stereo Enhancement",
/* 28 */ "Rockwell 3D Stereo Enhancement",
/* 29 */ "Reserved 29",
/* 30 */ "Reserved 30",
/* 31 */ "Reserved 31"
};
/* this table has default mixer values for all OSS mixers. */
static struct mixer_defaults {
int mixer;
......@@ -614,83 +578,6 @@ static int ac97_mixer_ioctl(struct ac97_codec *codec, unsigned int cmd, unsigned
return -EINVAL;
}
/* entry point for /proc/driver/controller_vendor/ac97/%d */
int ac97_read_proc (char *page, char **start, off_t off,
int count, int *eof, void *data)
{
int len = 0, cap, extid, val, id1, id2;
struct ac97_codec *codec;
int is_ac97_20 = 0;
if ((codec = data) == NULL)
return -ENODEV;
id1 = codec->codec_read(codec, AC97_VENDOR_ID1);
id2 = codec->codec_read(codec, AC97_VENDOR_ID2);
len += sprintf (page+len, "Vendor name : %s\n", codec->name);
len += sprintf (page+len, "Vendor id : %04X %04X\n", id1, id2);
extid = codec->codec_read(codec, AC97_EXTENDED_ID);
extid &= ~((1<<2)|(1<<4)|(1<<5)|(1<<10)|(1<<11)|(1<<12)|(1<<13));
len += sprintf (page+len, "AC97 Version : %s\n",
extid ? "2.0 or later" : "1.0");
if (extid) is_ac97_20 = 1;
cap = codec->codec_read(codec, AC97_RESET);
len += sprintf (page+len, "Capabilities :%s%s%s%s%s%s\n",
cap & 0x0001 ? " -dedicated MIC PCM IN channel-" : "",
cap & 0x0002 ? " -reserved1-" : "",
cap & 0x0004 ? " -bass & treble-" : "",
cap & 0x0008 ? " -simulated stereo-" : "",
cap & 0x0010 ? " -headphone out-" : "",
cap & 0x0020 ? " -loudness-" : "");
val = cap & 0x00c0;
len += sprintf (page+len, "DAC resolutions :%s%s%s\n",
" -16-bit-",
val & 0x0040 ? " -18-bit-" : "",
val & 0x0080 ? " -20-bit-" : "");
val = cap & 0x0300;
len += sprintf (page+len, "ADC resolutions :%s%s%s\n",
" -16-bit-",
val & 0x0100 ? " -18-bit-" : "",
val & 0x0200 ? " -20-bit-" : "");
len += sprintf (page+len, "3D enhancement : %s\n",
ac97_stereo_enhancements[(cap >> 10) & 0x1f]);
val = codec->codec_read(codec, AC97_GENERAL_PURPOSE);
len += sprintf (page+len, "POP path : %s 3D\n"
"Sim. stereo : %s\n"
"3D enhancement : %s\n"
"Loudness : %s\n"
"Mono output : %s\n"
"MIC select : %s\n"
"ADC/DAC loopback : %s\n",
val & 0x8000 ? "post" : "pre",
val & 0x4000 ? "on" : "off",
val & 0x2000 ? "on" : "off",
val & 0x1000 ? "on" : "off",
val & 0x0200 ? "MIC" : "MIX",
val & 0x0100 ? "MIC2" : "MIC1",
val & 0x0080 ? "on" : "off");
extid = codec->codec_read(codec, AC97_EXTENDED_ID);
cap = extid;
len += sprintf (page+len, "Ext Capabilities :%s%s%s%s%s%s%s\n",
cap & 0x0001 ? " -var rate PCM audio-" : "",
cap & 0x0002 ? " -2x PCM audio out-" : "",
cap & 0x0008 ? " -var rate MIC in-" : "",
cap & 0x0040 ? " -PCM center DAC-" : "",
cap & 0x0080 ? " -PCM surround DAC-" : "",
cap & 0x0100 ? " -PCM LFE DAC-" : "",
cap & 0x0200 ? " -slot/DAC mappings-" : "");
if (is_ac97_20) {
len += sprintf (page+len, "Front DAC rate : %d\n",
codec->codec_read(codec, AC97_PCM_FRONT_DAC_RATE));
}
return len;
}
/**
* codec_id - Turn id1/id2 into a PnP string
* @id1: Vendor ID1
......@@ -1313,176 +1200,5 @@ static int pt101_init(struct ac97_codec * codec)
#endif
EXPORT_SYMBOL(ac97_read_proc);
EXPORT_SYMBOL(ac97_probe_codec);
/*
* AC97 library support routines
*/
/**
* ac97_set_dac_rate - set codec rate adaption
* @codec: ac97 code
* @rate: rate in hertz
*
* Set the DAC rate. Assumes the codec supports VRA. The caller is
* expected to have checked this little detail.
*/
unsigned int ac97_set_dac_rate(struct ac97_codec *codec, unsigned int rate)
{
unsigned int new_rate = rate;
u32 dacp;
u32 mast_vol, phone_vol, mono_vol, pcm_vol;
u32 mute_vol = 0x8000; /* The mute volume? */
if(rate != codec->codec_read(codec, AC97_PCM_FRONT_DAC_RATE))
{
/* Mute several registers */
mast_vol = codec->codec_read(codec, AC97_MASTER_VOL_STEREO);
mono_vol = codec->codec_read(codec, AC97_MASTER_VOL_MONO);
phone_vol = codec->codec_read(codec, AC97_HEADPHONE_VOL);
pcm_vol = codec->codec_read(codec, AC97_PCMOUT_VOL);
codec->codec_write(codec, AC97_MASTER_VOL_STEREO, mute_vol);
codec->codec_write(codec, AC97_MASTER_VOL_MONO, mute_vol);
codec->codec_write(codec, AC97_HEADPHONE_VOL, mute_vol);
codec->codec_write(codec, AC97_PCMOUT_VOL, mute_vol);
/* Power down the DAC */
dacp=codec->codec_read(codec, AC97_POWER_CONTROL);
codec->codec_write(codec, AC97_POWER_CONTROL, dacp|0x0200);
/* Load the rate and read the effective rate */
codec->codec_write(codec, AC97_PCM_FRONT_DAC_RATE, rate);
new_rate=codec->codec_read(codec, AC97_PCM_FRONT_DAC_RATE);
/* Power it back up */
codec->codec_write(codec, AC97_POWER_CONTROL, dacp);
/* Restore volumes */
codec->codec_write(codec, AC97_MASTER_VOL_STEREO, mast_vol);
codec->codec_write(codec, AC97_MASTER_VOL_MONO, mono_vol);
codec->codec_write(codec, AC97_HEADPHONE_VOL, phone_vol);
codec->codec_write(codec, AC97_PCMOUT_VOL, pcm_vol);
}
return new_rate;
}
EXPORT_SYMBOL(ac97_set_dac_rate);
/**
* ac97_set_adc_rate - set codec rate adaption
* @codec: ac97 code
* @rate: rate in hertz
*
* Set the ADC rate. Assumes the codec supports VRA. The caller is
* expected to have checked this little detail.
*/
unsigned int ac97_set_adc_rate(struct ac97_codec *codec, unsigned int rate)
{
unsigned int new_rate = rate;
u32 dacp;
if(rate != codec->codec_read(codec, AC97_PCM_LR_ADC_RATE))
{
/* Power down the ADC */
dacp=codec->codec_read(codec, AC97_POWER_CONTROL);
codec->codec_write(codec, AC97_POWER_CONTROL, dacp|0x0100);
/* Load the rate and read the effective rate */
codec->codec_write(codec, AC97_PCM_LR_ADC_RATE, rate);
new_rate=codec->codec_read(codec, AC97_PCM_LR_ADC_RATE);
/* Power it back up */
codec->codec_write(codec, AC97_POWER_CONTROL, dacp);
}
return new_rate;
}
EXPORT_SYMBOL(ac97_set_adc_rate);
static int swap_headphone(int remove_master)
{
struct list_head *l;
struct ac97_codec *c;
if (remove_master) {
mutex_lock(&codec_mutex);
list_for_each(l, &codecs)
{
c = list_entry(l, struct ac97_codec, list);
if (supported_mixer(c, SOUND_MIXER_PHONEOUT))
c->supported_mixers &= ~SOUND_MASK_PHONEOUT;
}
mutex_unlock(&codec_mutex);
} else
ac97_hw[SOUND_MIXER_PHONEOUT].offset = AC97_MASTER_VOL_STEREO;
/* Scale values already match */
ac97_hw[SOUND_MIXER_VOLUME].offset = AC97_MASTER_VOL_MONO;
return 0;
}
static int apply_quirk(int quirk)
{
switch (quirk) {
case AC97_TUNE_NONE:
return 0;
case AC97_TUNE_HP_ONLY:
return swap_headphone(1);
case AC97_TUNE_SWAP_HP:
return swap_headphone(0);
case AC97_TUNE_SWAP_SURROUND:
return -ENOSYS; /* not yet implemented */
case AC97_TUNE_AD_SHARING:
return -ENOSYS; /* not yet implemented */
case AC97_TUNE_ALC_JACK:
return -ENOSYS; /* not yet implemented */
}
return -EINVAL;
}
/**
* ac97_tune_hardware - tune up the hardware
* @pdev: pci_dev pointer
* @quirk: quirk list
* @override: explicit quirk value (overrides if not AC97_TUNE_DEFAULT)
*
* Do some workaround for each pci device, such as renaming of the
* headphone (true line-out) control as "Master".
* The quirk-list must be terminated with a zero-filled entry.
*
* Returns zero if successful, or a negative error code on failure.
*/
int ac97_tune_hardware(struct pci_dev *pdev, struct ac97_quirk *quirk, int override)
{
int result;
if (!quirk)
return -EINVAL;
if (override != AC97_TUNE_DEFAULT) {
result = apply_quirk(override);
if (result < 0)
printk(KERN_ERR "applying quirk type %d failed (%d)\n", override, result);
return result;
}
for (; quirk->vendor; quirk++) {
if (quirk->vendor != pdev->subsystem_vendor)
continue;
if ((! quirk->mask && quirk->device == pdev->subsystem_device) ||
quirk->device == (quirk->mask & pdev->subsystem_device)) {
#ifdef DEBUG
printk("ac97 quirk for %s (%04x:%04x)\n", quirk->name, ac97->subsystem_vendor, pdev->subsystem_device);
#endif
result = apply_quirk(quirk->type);
if (result < 0)
printk(KERN_ERR "applying quirk type %d for %s failed (%d)\n", quirk->type, quirk->name, result);
return result;
}
}
return 0;
}
EXPORT_SYMBOL_GPL(ac97_tune_hardware);
MODULE_LICENSE("GPL");
此差异已折叠。
/*
* Copyright (C) by Hannu Savolainen 1993-1997
*
* cs4232.c
*
* The low level driver for Crystal CS4232 based cards. The CS4232 is
* a PnP compatible chip which contains a CS4231A codec, SB emulation,
* a MPU401 compatible MIDI port, joystick and synthesizer and IDE CD-ROM
* interfaces. This is just a temporary driver until full PnP support
* gets implemented. Just the WSS codec, FM synth and the MIDI ports are
* supported. Other interfaces are left uninitialized.
*
* ifdef ...WAVEFRONT...
*
* Support is provided for initializing the WaveFront synth
* interface as well, which is logical device #4. Note that if
* you have a Tropez+ card, you probably don't need to setup
* the CS4232-supported MIDI interface, since it corresponds to
* the internal 26-pin header that's hard to access. Using this
* requires an additional IRQ, a resource none too plentiful in
* this environment. Just don't set module parameters mpuio and
* mpuirq, and the MIDI port will be left uninitialized. You can
* still use the ICS2115 hosted MIDI interface which corresponds
* to the 9-pin D connector on the back of the card.
*
* endif ...WAVEFRONT...
*
* Supported chips are:
* CS4232
* CS4236
* CS4236B
*
* Note: You will need a PnP config setup to initialise some CS4232 boards
* anyway.
*
* Changes
* John Rood Added Bose Sound System Support.
* Toshio Spoor
* Alan Cox Modularisation, Basic cleanups.
* Paul Barton-Davis Separated MPU configuration, added
* Tropez+ (WaveFront) support
* Christoph Hellwig Adapted to module_init/module_exit,
* simple cleanups
* Arnaldo C. de Melo got rid of attach_uart401
* Bartlomiej Zolnierkiewicz
* Added some __init/__initdata/__exit
* Marcus Meissner Added ISA PnP support.
*/
#include <linux/pnp.h>
#include <linux/module.h>
#include <linux/init.h>
#include "sound_config.h"
#include "ad1848.h"
#include "mpu401.h"
#define KEY_PORT 0x279 /* Same as LPT1 status port */
#define CSN_NUM 0x99 /* Just a random number */
#define INDEX_ADDRESS 0x00 /* (R0) Index Address Register */
#define INDEX_DATA 0x01 /* (R1) Indexed Data Register */
#define PIN_CONTROL 0x0a /* (I10) Pin Control */
#define ENABLE_PINS 0xc0 /* XCTRL0/XCTRL1 enable */
static void CS_OUT(unsigned char a)
{
outb(a, KEY_PORT);
}
#define CS_OUT2(a, b) {CS_OUT(a);CS_OUT(b);}
#define CS_OUT3(a, b, c) {CS_OUT(a);CS_OUT(b);CS_OUT(c);}
static int __initdata bss = 0;
static int mpu_base, mpu_irq;
static int synth_base, synth_irq;
static int mpu_detected;
static int probe_cs4232_mpu(struct address_info *hw_config)
{
/*
* Just write down the config values.
*/
mpu_base = hw_config->io_base;
mpu_irq = hw_config->irq;
return 1;
}
static unsigned char crystal_key[] = /* A 32 byte magic key sequence */
{
0x96, 0x35, 0x9a, 0xcd, 0xe6, 0xf3, 0x79, 0xbc,
0x5e, 0xaf, 0x57, 0x2b, 0x15, 0x8a, 0xc5, 0xe2,
0xf1, 0xf8, 0x7c, 0x3e, 0x9f, 0x4f, 0x27, 0x13,
0x09, 0x84, 0x42, 0xa1, 0xd0, 0x68, 0x34, 0x1a
};
static void sleep(unsigned howlong)
{
current->state = TASK_INTERRUPTIBLE;
schedule_timeout(howlong);
}
static void enable_xctrl(int baseio)
{
unsigned char regd;
/*
* Some IBM Aptiva's have the Bose Sound System. By default
* the Bose Amplifier is disabled. The amplifier will be
* activated, by setting the XCTRL0 and XCTRL1 bits.
* Volume of the monitor bose speakers/woofer, can then
* be set by changing the PCM volume.
*
*/
printk("cs4232: enabling Bose Sound System Amplifier.\n");
/* Switch to Pin Control Address */
regd = inb(baseio + INDEX_ADDRESS) & 0xe0;
outb(((unsigned char) (PIN_CONTROL | regd)), baseio + INDEX_ADDRESS );
/* Activate the XCTRL0 and XCTRL1 Pins */
regd = inb(baseio + INDEX_DATA);
outb(((unsigned char) (ENABLE_PINS | regd)), baseio + INDEX_DATA );
}
static int __init probe_cs4232(struct address_info *hw_config, int isapnp_configured)
{
int i, n;
int base = hw_config->io_base, irq = hw_config->irq;
int dma1 = hw_config->dma, dma2 = hw_config->dma2;
struct resource *ports;
if (base == -1 || irq == -1 || dma1 == -1) {
printk(KERN_ERR "cs4232: dma, irq and io must be set.\n");
return 0;
}
/*
* Verify that the I/O port range is free.
*/
ports = request_region(base, 4, "ad1848");
if (!ports) {
printk(KERN_ERR "cs4232.c: I/O port 0x%03x not free\n", base);
return 0;
}
if (ad1848_detect(ports, NULL, hw_config->osp)) {
goto got_it; /* The card is already active */
}
if (isapnp_configured) {
printk(KERN_ERR "cs4232.c: ISA PnP configured, but not detected?\n");
goto fail;
}
/*
* This version of the driver doesn't use the PnP method when configuring
* the card but a simplified method defined by Crystal. This means that
* just one CS4232 compatible device can exist on the system. Also this
* method conflicts with possible PnP support in the OS. For this reason
* driver is just a temporary kludge.
*
* Also the Cirrus/Crystal method doesn't always work. Try ISA PnP first ;)
*/
/*
* Repeat initialization few times since it doesn't always succeed in
* first time.
*/
for (n = 0; n < 4; n++)
{
/*
* Wake up the card by sending a 32 byte Crystal key to the key port.
*/
for (i = 0; i < 32; i++)
CS_OUT(crystal_key[i]);
sleep(HZ / 10);
/*
* Now set the CSN (Card Select Number).
*/
CS_OUT2(0x06, CSN_NUM);
/*
* Then set some config bytes. First logical device 0
*/
CS_OUT2(0x15, 0x00); /* Select logical device 0 (WSS/SB/FM) */
CS_OUT3(0x47, (base >> 8) & 0xff, base & 0xff); /* WSS base */
if (!request_region(0x388, 4, "FM")) /* Not free */
CS_OUT3(0x48, 0x00, 0x00) /* FM base off */
else {
release_region(0x388, 4);
CS_OUT3(0x48, 0x03, 0x88); /* FM base 0x388 */
}
CS_OUT3(0x42, 0x00, 0x00); /* SB base off */
CS_OUT2(0x22, irq); /* SB+WSS IRQ */
CS_OUT2(0x2a, dma1); /* SB+WSS DMA */
if (dma2 != -1)
CS_OUT2(0x25, dma2) /* WSS DMA2 */
else
CS_OUT2(0x25, 4); /* No WSS DMA2 */
CS_OUT2(0x33, 0x01); /* Activate logical dev 0 */
sleep(HZ / 10);
/*
* Initialize logical device 3 (MPU)
*/
if (mpu_base != 0 && mpu_irq != 0)
{
CS_OUT2(0x15, 0x03); /* Select logical device 3 (MPU) */
CS_OUT3(0x47, (mpu_base >> 8) & 0xff, mpu_base & 0xff); /* MPU base */
CS_OUT2(0x22, mpu_irq); /* MPU IRQ */
CS_OUT2(0x33, 0x01); /* Activate logical dev 3 */
}
if(synth_base != 0)
{
CS_OUT2 (0x15, 0x04); /* logical device 4 (WaveFront) */
CS_OUT3 (0x47, (synth_base >> 8) & 0xff,
synth_base & 0xff); /* base */
CS_OUT2 (0x22, synth_irq); /* IRQ */
CS_OUT2 (0x33, 0x01); /* Activate logical dev 4 */
}
/*
* Finally activate the chip
*/
CS_OUT(0x79);
sleep(HZ / 5);
/*
* Then try to detect the codec part of the chip
*/
if (ad1848_detect(ports, NULL, hw_config->osp))
goto got_it;
sleep(HZ);
}
fail:
release_region(base, 4);
return 0;
got_it:
if (dma2 == -1)
dma2 = dma1;
hw_config->slots[0] = ad1848_init("Crystal audio controller", ports,
irq,
dma1, /* Playback DMA */
dma2, /* Capture DMA */
0,
hw_config->osp,
THIS_MODULE);
if (hw_config->slots[0] != -1 &&
audio_devs[hw_config->slots[0]]->mixer_dev!=-1)
{
/* Assume the mixer map is as suggested in the CS4232 databook */
AD1848_REROUTE(SOUND_MIXER_LINE1, SOUND_MIXER_LINE);
AD1848_REROUTE(SOUND_MIXER_LINE2, SOUND_MIXER_CD);
AD1848_REROUTE(SOUND_MIXER_LINE3, SOUND_MIXER_SYNTH); /* FM synth */
}
if (mpu_base != 0 && mpu_irq != 0)
{
static struct address_info hw_config2 = {
0
}; /* Ensure it's initialized */
hw_config2.io_base = mpu_base;
hw_config2.irq = mpu_irq;
hw_config2.dma = -1;
hw_config2.dma2 = -1;
hw_config2.always_detect = 0;
hw_config2.name = NULL;
hw_config2.driver_use_1 = 0;
hw_config2.driver_use_2 = 0;
hw_config2.card_subtype = 0;
if (probe_uart401(&hw_config2, THIS_MODULE))
{
mpu_detected = 1;
}
else
{
mpu_base = mpu_irq = 0;
}
hw_config->slots[1] = hw_config2.slots[1];
}
if (bss)
enable_xctrl(base);
return 1;
}
static void __devexit unload_cs4232(struct address_info *hw_config)
{
int base = hw_config->io_base, irq = hw_config->irq;
int dma1 = hw_config->dma, dma2 = hw_config->dma2;
if (dma2 == -1)
dma2 = dma1;
ad1848_unload(base,
irq,
dma1, /* Playback DMA */
dma2, /* Capture DMA */
0);
sound_unload_audiodev(hw_config->slots[0]);
if (mpu_base != 0 && mpu_irq != 0 && mpu_detected)
{
static struct address_info hw_config2 =
{
0
}; /* Ensure it's initialized */
hw_config2.io_base = mpu_base;
hw_config2.irq = mpu_irq;
hw_config2.dma = -1;
hw_config2.dma2 = -1;
hw_config2.always_detect = 0;
hw_config2.name = NULL;
hw_config2.driver_use_1 = 0;
hw_config2.driver_use_2 = 0;
hw_config2.card_subtype = 0;
hw_config2.slots[1] = hw_config->slots[1];
unload_uart401(&hw_config2);
}
}
static struct address_info cfg;
static struct address_info cfg_mpu;
static int __initdata io = -1;
static int __initdata irq = -1;
static int __initdata dma = -1;
static int __initdata dma2 = -1;
static int __initdata mpuio = -1;
static int __initdata mpuirq = -1;
static int __initdata synthio = -1;
static int __initdata synthirq = -1;
static int __initdata isapnp = 1;
static unsigned int cs4232_devices;
MODULE_DESCRIPTION("CS4232 based soundcard driver");
MODULE_AUTHOR("Hannu Savolainen, Paul Barton-Davis");
MODULE_LICENSE("GPL");
module_param(io, int, 0);
MODULE_PARM_DESC(io,"base I/O port for AD1848");
module_param(irq, int, 0);
MODULE_PARM_DESC(irq,"IRQ for AD1848 chip");
module_param(dma, int, 0);
MODULE_PARM_DESC(dma,"8 bit DMA for AD1848 chip");
module_param(dma2, int, 0);
MODULE_PARM_DESC(dma2,"16 bit DMA for AD1848 chip");
module_param(mpuio, int, 0);
MODULE_PARM_DESC(mpuio,"MPU 401 base address");
module_param(mpuirq, int, 0);
MODULE_PARM_DESC(mpuirq,"MPU 401 IRQ");
module_param(synthio, int, 0);
MODULE_PARM_DESC(synthio,"Maui WaveTable base I/O port");
module_param(synthirq, int, 0);
MODULE_PARM_DESC(synthirq,"Maui WaveTable IRQ");
module_param(isapnp, bool, 0);
MODULE_PARM_DESC(isapnp,"Enable ISAPnP probing (default 1)");
module_param(bss, bool, 0);
MODULE_PARM_DESC(bss,"Enable Bose Sound System Support (default 0)");
/*
* Install a CS4232 based card. Need to have ad1848 and mpu401
* loaded ready.
*/
/* All cs4232 based cards have the main ad1848 card either as CSC0000 or
* CSC0100. */
static const struct pnp_device_id cs4232_pnp_table[] = {
{ .id = "CSC0100", .driver_data = 0 },
{ .id = "CSC0000", .driver_data = 0 },
/* Guillemot Turtlebeach something appears to be cs4232 compatible
* (untested) */
{ .id = "GIM0100", .driver_data = 0 },
{ .id = ""}
};
MODULE_DEVICE_TABLE(pnp, cs4232_pnp_table);
static int __init cs4232_pnp_probe(struct pnp_dev *dev, const struct pnp_device_id *dev_id)
{
struct address_info *isapnpcfg;
isapnpcfg = kmalloc(sizeof(*isapnpcfg),GFP_KERNEL);
if (!isapnpcfg)
return -ENOMEM;
isapnpcfg->irq = pnp_irq(dev, 0);
isapnpcfg->dma = pnp_dma(dev, 0);
isapnpcfg->dma2 = pnp_dma(dev, 1);
isapnpcfg->io_base = pnp_port_start(dev, 0);
if (probe_cs4232(isapnpcfg,TRUE) == 0) {
printk(KERN_ERR "cs4232: ISA PnP card found, but not detected?\n");
kfree(isapnpcfg);
return -ENODEV;
}
pnp_set_drvdata(dev,isapnpcfg);
cs4232_devices++;
return 0;
}
static void __devexit cs4232_pnp_remove(struct pnp_dev *dev)
{
struct address_info *cfg = pnp_get_drvdata(dev);
if (cfg) {
unload_cs4232(cfg);
kfree(cfg);
}
}
static struct pnp_driver cs4232_driver = {
.name = "cs4232",
.id_table = cs4232_pnp_table,
.probe = cs4232_pnp_probe,
.remove = __devexit_p(cs4232_pnp_remove),
};
static int __init init_cs4232(void)
{
#ifdef CONFIG_SOUND_WAVEFRONT_MODULE
if(synthio == -1)
printk(KERN_INFO "cs4232: set synthio and synthirq to use the wavefront facilities.\n");
else {
synth_base = synthio;
synth_irq = synthirq;
}
#else
if(synthio != -1)
printk(KERN_WARNING "cs4232: wavefront support not enabled in this driver.\n");
#endif
cfg.irq = -1;
if (isapnp) {
pnp_register_driver(&cs4232_driver);
if (cs4232_devices)
return 0;
}
if(io==-1||irq==-1||dma==-1)
{
printk(KERN_ERR "cs4232: Must set io, irq and dma.\n");
return -ENODEV;
}
cfg.io_base = io;
cfg.irq = irq;
cfg.dma = dma;
cfg.dma2 = dma2;
cfg_mpu.io_base = -1;
cfg_mpu.irq = -1;
if (mpuio != -1 && mpuirq != -1) {
cfg_mpu.io_base = mpuio;
cfg_mpu.irq = mpuirq;
probe_cs4232_mpu(&cfg_mpu); /* Bug always returns 0 not OK -- AC */
}
if (probe_cs4232(&cfg,FALSE) == 0)
return -ENODEV;
return 0;
}
static void __exit cleanup_cs4232(void)
{
pnp_unregister_driver(&cs4232_driver);
if (cfg.irq != -1)
unload_cs4232(&cfg); /* Unloads global MPU as well, if needed */
}
module_init(init_cs4232);
module_exit(cleanup_cs4232);
#ifndef MODULE
static int __init setup_cs4232(char *str)
{
/* io, irq, dma, dma2 mpuio, mpuirq*/
int ints[7];
/* If we have isapnp cards, no need for options */
pnp_register_driver(&cs4232_driver);
if (cs4232_devices)
return 1;
str = get_options(str, ARRAY_SIZE(ints), ints);
io = ints[1];
irq = ints[2];
dma = ints[3];
dma2 = ints[4];
mpuio = ints[5];
mpuirq = ints[6];
return 1;
}
__setup("cs4232=", setup_cs4232);
#endif
此差异已折叠。
此差异已折叠。
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册