Kconfig

# Copyright (c) 2013-2019 Huawei Technologies Co., Ltd. All rights reserved.
# Copyright (c) 2020-2021 Huawei Device Co., Ltd. All rights reserved.
#
# Redistribution and use in source and binary forms, with or without modification,
# are permitted provided that the following conditions are met:
#
# 1. Redistributions of source code must retain the above copyright notice, this list of
#    conditions and the following disclaimer.
#
# 2. Redistributions in binary form must reproduce the above copyright notice, this list
#    of conditions and the following disclaimer in the documentation and/or other materials
#    provided with the distribution.
#
# 3. Neither the name of the copyright holder nor the names of its contributors may be used
#    to endorse or promote products derived from this software without specific prior written
#    permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
# THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
# PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
# CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
# EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
#
#
# For a description of the syntax of this configuration file,
# see extra/config/Kconfig-language.txt
#
mainmenu "Huawei LiteOS Configuration"

menu "Compiler"
choice
    prompt "LiteOS_Compiler_Type"
    default COMPILER_CLANG_LLVM
    help
      Enable arm-himix100 or aarch64-himix100 or compiler.

config COMPILER_HIMIX_32
    bool "arm-linux-ohoseabi"
    depends on PLATFORM_HI3518EV300 || PLATFORM_HI3516DV300 || PLATFORM_QEMU_ARM_VIRT_CA7

config COMPILER_CLANG_LLVM
    bool "clang-llvm"
    depends on PLATFORM_HI3518EV300 || PLATFORM_HI3516DV300 || PLATFORM_QEMU_ARM_VIRT_CA7

endchoice
endmenu

menu "Platform"

######################### config options of bsp #####################
source "../../kernel/liteos_a/platform/Kconfig"

######################### config options of cpu arch ################
source "../../kernel/liteos_a/arch/Kconfig"

######################### config options of rootfs #####################
source "../../kernel/liteos_a/kernel/common/Kconfig"
######################### config options of patchfs #####################
source "../../kernel/liteos_a/kernel/common/patchfs/Kconfig"

config QUICK_START
    bool "Enable QUICK_START"
    default n
    depends on DRIVERS && FS_VFS
    help
      Answer Y to enable LiteOS support quick start.
endmenu

######################### config options of kernel #####################
source "../../kernel/liteos_a/kernel/Kconfig"
######################### config options of lib ########################
source "../../kernel/liteos_a/lib/Kconfig"
######################### config options of compatibility ##############
menu "Compat"
source "../../kernel/liteos_a/compat/posix/Kconfig"
source "../../kernel/liteos_a/bsd/Kconfig"
endmenu

######################### config options of framework ##################
#source "../../frameworks/m2mcomm/Kconfig"

######################## config options of filesystem ##################
menu "FileSystem"
source "../../kernel/liteos_a/fs/vfs/Kconfig"
source "../../kernel/liteos_a/fs/fat/Kconfig"
source "../../kernel/liteos_a/fs/ramfs/Kconfig"
source "../../kernel/liteos_a/fs/nfs/Kconfig"
source "../../kernel/liteos_a/fs/proc/Kconfig"
source "../../kernel/liteos_a/fs/jffs2/Kconfig"
config ENABLE_READ_BUFFER
    bool "Enable read buffer Option"
    default n
    depends on FS_VFS
    help
      Answer Y to add enable read buffer Option.

config MAX_VNODE_SIZE
    int "Vnode max number"
    range 0 512
    default 512
    depends on FS_VFS
    help
      vnode number, range from 0 to 512.

config MAX_PATH_CACHE_SIZE
    int "PathCache max number"
    range 0 1024
    default 512
    depends on FS_VFS
    help
      pathCache number, range from 0 to 1024.
endmenu

######################## config options of net ############################
source "../../kernel/liteos_a/net/Kconfig"

######################## config options of debug ########################
menu "Debug"
config COMPILE_DEBUG
    bool "Enable GCC -g Option"
    default n
    help
      Answer Y to add -g option in gcc command. But the LiteOS size will be much larger.

config PLATFORM_ADAPT
    bool "Enable Os_adapt"
    default y
    help
      Answer Y to add os_adapt.c to LiteOS.

config ENABLE_OOM_LOOP_TASK
    bool "Enable Oom loop task"
    default n
    depends on KERNEL_VM
    help
      Answer Y to enable oom loop kthread to check system out of memory.

config DO_ALIGN
    bool "Enable do align for hi3518e"
    default y
    depends on PLATFORM_HI3518EV200
    help
      Answer Y to enable do align for hi3518e.


config ENABLE_MAGICKEY
    bool "Enable MAGIC KEY"
    default y
    help
      Answer Y to enable LiteOS Magic key.
        ctrl + r : Magic key check switch;
        ctrl + z : Show all magic op key;
        ctrl + t : Show task information;
        ctrl + p : System panic;
        ctrl + e : Check system memory pool.

config THUMB
    bool "Enable Thumb"
    default n
    help
      Answer Y to build thumb version.  This will make LiteOS smaller.
config PLATFORM_DVFS
    bool "Enable Dvfs"
    default n
    depends on  COMPAT_LINUXKPI
    help
      Answer Y to enable LiteOS support dynamic voltage and frequency scaling feature for
      low power consumption.

config DEBUG_VERSION
    bool "Enable a Debug Version"
    default n
    help
      If you do not select this option that means you enable a release version for LiteOS.
      It also means you do not want to use debug modules, like shell,telnet,tftp,
      ,nfs,ramfs proc and memory check.
      If you select this option that means you enable a debug version for LiteOS.
      That means you want a opposite behaviour compared to release version.

config DEBUG_KERNEL
    bool "Enable Debug LiteOS Kernel Resource"
    default n
    depends on DEBUG_VERSION
    help
      If you select this option that means you enable debugging kernel resource.
      It also means you want to get queue, mutex, semaphore, memory debug information.
      That means you want a opposite behaviour compared to release version.

config DEBUG_QUEUE
    bool "Enable Queue Debugging"
    default n
    depends on DEBUG_KERNEL
    help
      Answer Y to enable debug queue.

config DEBUG_DEADLOCK
    bool "Enable Mutex Deadlock Debugging"
    default n
    depends on DEBUG_KERNEL
    help
      Answer Y to enable debug mutex deadlock.

config DEBUG_SEMAPHORE
    bool "Enable Semaphore Debugging"
    default n
    depends on DEBUG_KERNEL
    help
      Answer Y to enable debug semaphore.

source "../../kernel/liteos_a/shell/Kconfig"
config NET_LWIP_SACK_TFTP
    bool "Enable Tftp"
    default y
    depends on SHELL && NET_LWIP_SACK && DEBUG_VERSION
    help
      Answer Y to enable LiteOS support tftp cmd and tftp tool.
source "../../kernel/liteos_a/net/telnet/Kconfig"
config EXC_INTERACTION
    bool "Enable exc interaction"
    default n
    depends on SHELL
    help
      Answer Y to enable exception interaction for LiteOS, when the system enter exception, user can also interact with system by shell
      command like readreg, writereg,task,hwi.

config SCHED_DEBUG
    bool "Enable sched debug Feature"
    default n
    depends on DEBUG_VERSION
    help
      If you wish to build LiteOS with support for sched debug.

config USER_INIT_DEBUG
    bool "Enable user init Debug"
    default n
    depends on DEBUG_VERSION

config SHELL_CMD_DEBUG
    bool "Enable shell cmd Debug"
    default n
    depends on DEBUG_VERSION && SHELL

config USB_DEBUG
    bool "Enable USB Debug"
    default n
    depends on SHELL && DRIVERS_USB && DEBUG_VERSION
    help
      Answer Y to enable LiteOS support usb debug.
      use shell command to open the specified debug level print.
config MEM_DEBUG
    bool "Enable MEM Debug"
    default n
    depends on DEBUG_VERSION
    help
      Answer Y to enable LiteOS support mem debug.

config MEM_LEAKCHECK
    bool "Enable Function call stack of Mem operation recorded"
    default n
    depends on DEBUG_VERSION && MEM_DEBUG
    help
      Answer Y to enable record the LR of Function call stack of Mem operation, it can check the mem leak through the infomations of mem node.
config BASE_MEM_NODE_INTEGRITY_CHECK
    bool "Enable integrity check or not "
    default n
    depends on DEBUG_VERSION && MEM_DEBUG
config MEM_WATERLINE
    bool "Enable memory pool waterline or not"
    default n
    depends on DEBUG_VERSION && MEM_DEBUG

config VM_OVERLAP_CHECK
    bool "Enable VM overlap check or not"
    default n
    depends on DEBUG_VERSION && MEM_DEBUG
    help
      Answer Y to enable vm overlap check.

config NULL_ADDRESS_PROTECT
    bool "Enable NULL Address protect"
    default n
    depends on (PLATFORM_HI3518EV200 || PLATFORM_HI3516CV300 || PLATFORM_HI3518EV300 || PLATFORM_HI3516DV300 || PLATFORM_QEMU_ARM_VIRT_CA7) && DEBUG_VERSION
    help
      Answer Y to set mem address 0~1M prohibit to access, read or write will trigger exception.

endmenu

######################## config options os drivers ########################
menu "Driver"
config DRIVERS
    bool "Enable Driver"
    default y
    help
      Answer Y to enable LiteOS support driver.

source "../../kernel/liteos_a/bsd/dev/usb/Kconfig"
source "../../drivers/adapter/khdf/liteos/Kconfig"

source "drivers/char/mem/Kconfig"
source "drivers/char/quickstart/Kconfig"
source "drivers/char/random/Kconfig"
source "../../drivers/liteos/tzdriver/Kconfig"
source "drivers/char/video/Kconfig"
source "../../drivers/liteos/hievent/Kconfig"

endmenu

menu "Security"
source "../../kernel/liteos_a/security/Kconfig"
endmenu

menu "Stack Smashing Protector (SSP) Compiler Feature"

choice
    prompt "Enable stack buffer overflow detection"
    default  CC_STACKPROTECTOR_STRONG
    ---help---
    This option turns on the -fstack-protector GCC feature. This
    feature puts, at the beginning of functions, a canary value on
    the stack just before the return address, and validates
    the value just before actually returning.  Stack based buffer
    overflows (that need to overwrite this return address) now also
    overwrite the canary, which gets detected and the attack is then
    neutralized via a kernel panic.

    This feature requires gcc version 4.2 or above, or a distribution
    gcc with the feature backported. Older versions are automatically
    detected and for those versions, this configuration option is
    ignored. (and a warning is printed during bootup)

config CC_NO_STACKPROTECTOR
    bool "-fno-stack-protector"

config CC_STACKPROTECTOR
    bool "-fstack-protector"

config CC_STACKPROTECTOR_STRONG
    bool "-fstack-protector-strong"

config CC_STACKPROTECTOR_ALL
    bool "-fstack-protector-all"

endchoice

endmenu