- 24 3月, 2016 1 次提交
-
-
由 Jeff King 提交于
The "git -c var=value" option stuffs the config value into $GIT_CONFIG_PARAMETERS, so that sub-processes can see it. When the config is later read via git_config() or similar, we parse it back out of that variable. The parsing end is a little bit picky; it assumes that each entry was generated with sq_quote_buf(), and that there is no extraneous whitespace. On the generating end, we are careful to append to an existing $GIT_CONFIG_PARAMETERS variable if it exists. However, our test for "should we add a space separator" is too liberal: it will add one even if the environment variable exists but is empty. As a result, you might end up with: GIT_CONFIG_PARAMETERS=" 'core.foo=bar'" which the parser will choke on. This was hard to trigger in older versions of git, since we only set the variable when we had something to put into it (though you could certainly trigger it manually). But since 14111fc4 (git: submodule honor -c credential.* from command line, 2016-02-29), the submodule code will unconditionally put the $GIT_CONFIG_PARAMETERS variable into the environment of any operation in the submodule, whether it is empty or not. So any of those operations which themselves use "git -c" will generate the unparseable value and fail. We can easily fix it by catching this case on the generating side. While we're adding a test, let's also check that multiple layers of "git -c" work, which was previously not tested at all. Reported-by: NShin Fan <shinfan@google.com> Signed-off-by: NJeff King <peff@peff.net> Reviewed-by: NJonathan Nieder <jrnieder@gmail.com> Tested-by: NJonathan Nieder <jrnieder@gmail.com> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
- 28 1月, 2016 2 次提交
-
-
由 Christian Couder 提交于
To correctly perform its testing function, test-dump-untracked-cache should not change the state of the untracked cache in the index. As a previous patch makes read_index_from() change the state of the untracked cache and as test-dump-untracked-cache indirectly calls this function, we need a mechanism to prevent read_index_from() from changing the untracked cache state when it's called from test-dump-untracked-cache. Signed-off-by: NChristian Couder <chriscool@tuxfamily.org> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Christian Couder 提交于
When we know that mtime on directory as given by the environment is usable for the purpose of untracked cache, we may want the untracked cache to be always used without any mtime test or kernel name check being performed. Also when we know that mtime is not usable for the purpose of untracked cache, for example because the repo is shared over a network file system, we may want the untracked-cache to be automatically removed from the index. Allow the user to express such preference by setting the 'core.untrackedCache' configuration variable, which can take 'keep', 'false', or 'true' and default to 'keep'. When read_index_from() is called, it now adds or removes the untracked cache in the index to respect the value of this variable. So it does nothing if the value is `keep` or if the variable is unset; it adds the untracked cache if the value is `true`; and it removes the cache if the value is `false`. `git update-index --[no-|force-]untracked-cache` still adds the untracked cache to, or removes it, from the index, but this shows a warning if it goes against the value of core.untrackedCache, because the next time the index is read the untracked cache will be added or removed if the configuration is set to do so. Also `--untracked-cache` used to check that the underlying operating system and file system change `st_mtime` field of a directory if files are added or deleted in that directory. But because those tests take a long time, `--untracked-cache` no longer performs them. Instead, there is now `--test-untracked-cache` to perform the tests. This change makes `--untracked-cache` the same as `--force-untracked-cache`. This last change is backward incompatible and should be mentioned in the release notes. Helped-by: NDuy Nguyen <pclouds@gmail.com> Helped-by: NTorsten Bögershausen <tboegi@web.de> Helped-by: NStefan Beller <sbeller@google.com> Signed-off-by: NChristian Couder <chriscool@tuxfamily.org> Signed-off-by: NÆvar Arnfjörð Bjarmason <avarab@gmail.com> read-cache: Duy'sfixup Signed-off-by: NChristian Couder <chriscool@tuxfamily.org> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
- 02 12月, 2015 1 次提交
-
-
由 SZEDER Gábor 提交于
The error message after a failing commit_lock_file() call sometimes looks like this, causing confusion: $ git remote add remote git@server.com/repo.git error: could not commit config file .git/config # Huh?! # I didn't want to commit anything, especially not my config file! While in the narrow context of the lockfile module using the verb 'commit' in the error message makes perfect sense, in the broader context of git the word 'commit' already has a very specific meaning, hence the confusion. Reword these error messages to say "could not write" instead of "could not commit". While at it, include strerror in the error messages after writing the config file or the credential store fails to provide some information about the cause of the failure, and update the style of the error message after writing the reflog fails to match surrounding error messages (i.e. no '' around the pathname and no () around the error description). Signed-off-by: NSZEDER Gábor <szeder@ira.uka.de> Signed-off-by: NJeff King <peff@peff.net>
-
- 24 8月, 2015 1 次提交
-
-
由 Jeff King 提交于
When we are running the git command "foo", we may have to look up the config keys "pager.foo" and "alias.foo". These config schemes are mis-designed, as the command names can be anything, but the config syntax has some restrictions. For example: $ git foo_bar error: invalid key: pager.foo_bar error: invalid key: alias.foo_bar git: 'foo_bar' is not a git command. See 'git --help'. You cannot name an alias with an underscore. And if you have an external command with one, you cannot configure its pager. In the long run, we may develop a different config scheme for these features. But in the near term (and because we'll need to support the existing scheme indefinitely), we should at least squelch the error messages shown above. These errors come from git_config_parse_key. Ideally we would pass a "quiet" flag to the config machinery, but there are many layers between the pager code and the key parsing. Passing a flag through all of those would be an invasive change. Instead, let's provide a config function to report on whether a key is syntactically valid, and have the pager and alias code skip lookup for bogus keys. We can build this easily around the existing git_config_parse_key, with two minor modifications: 1. We now handle a NULL store_key, to validate but not write out the normalized key. 2. We accept a "quiet" flag to avoid writing to stderr. This doesn't need to be a full-blown public "flags" field, because we can make the existing implementation a static helper function, keeping the mess contained inside config.c. Signed-off-by: NJeff King <peff@peff.net> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
- 20 8月, 2015 1 次提交
-
-
由 Dave Borowitz 提交于
This helper function does not complain about the config variable but just silently reports failure to the caller. It is useful for callers that need to parse any string that could be boolean or other string (e.g. tristate yes/no/auto). Signed-off-by: NDave Borowitz <dborowitz@google.com> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
- 15 8月, 2015 1 次提交
-
-
由 Sven Strickroth 提交于
When updating an existing configuration file, we did not always close the filehandle that is reading from the current configuration file when we encountered an error (e.g. when unsetting a variable that does not exist). Signed-off-by: NSven Strickroth <email@cs-ware.de> Signed-off-by: NSup Yut Sum <ch3cooli@gmail.com> Reviewed-by: NEric Sunshine <sunshine@sunshineco.com> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
- 11 8月, 2015 1 次提交
-
-
由 Michael Haggerty 提交于
Signed-off-by: NMichael Haggerty <mhagger@alum.mit.edu> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
- 01 7月, 2015 1 次提交
-
-
由 Karsten Blees 提交于
Renaming to an existing file doesn't work on Windows network shares if the target file is open. munmap() the old config file before commit_lock_file. Signed-off-by: NKarsten Blees <blees@dcon.de> Acked-by: NJeff King <peff@peff.net> Acked-by: NJohannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
- 29 5月, 2015 3 次提交
-
-
由 Jeff King 提交于
If we try to mmap a directory, we'll get ENODEV. This translates to "no such device" for the user, which is not very helpful. Since we've just fstat()'d the file, we can easily check whether the problem was a directory to give a better message. Signed-off-by: NJeff King <peff@peff.net> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Jeff King 提交于
The config-writing code uses xmmap to map the existing config file, which will die if the map fails. This has two downsides: 1. The error message is not very helpful, as it lacks any context about the file we are mapping: $ mkdir foo $ git config --file=foo some.key value fatal: Out of memory? mmap failed: No such device 2. We normally do not die in this code path; instead, we'd rather report the error and return an appropriate exit status (which is part of the public interface documented in git-config.1). This patch introduces a "gentle" form of xmmap which lets us produce our own error message. We do not want to use mmap directly, because we would like to use the other compatibility elements of xmmap (e.g., handling 0-length maps portably). The end result is: $ git.compile config --file=foo some.key value error: unable to mmap 'foo': No such device $ echo $? 3 Signed-off-by: NJeff King <peff@peff.net> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Jeff King 提交于
We mmap the existing config file, but fail to unmap it if we hit an error. The function already has a shared exit path, so we can fix this by moving the mmap pointer to the function scope and clearing it in the shared exit. Signed-off-by: NJeff King <peff@peff.net> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
- 07 5月, 2015 1 次提交
-
-
由 Paul Tan 提交于
Since home_config_paths() combines distinct functionality already implemented by expand_user_path() and xdg_config_home(), and hides the home config file path ~/.gitconfig. Make the code more explicit by replacing the use of home_config_paths() with expand_user_path() and xdg_config_home(). Signed-off-by: NPaul Tan <pyokagan@gmail.com> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
- 17 4月, 2015 1 次提交
-
-
由 Junio C Hamano 提交于
Because the function reads one character at the time, unfortunately we cannot use the easier skip_utf8_bom() helper, but at least we do not have to duplicate the constant string this way. Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
- 16 4月, 2015 1 次提交
-
-
由 Jeff King 提交于
We read config files character-by-character from a stdio handle using fgetc(). This incurs significant locking overhead, even though we know that only one thread can possibly access the handle. We can speed this up by taking the lock ourselves, and then using getc_unlocked to read each character. On a silly pathological case: perl -le ' print "[core]"; print "key$_ = value$_" for (1..1000000) ' >input git config -f input core.key1 this dropped the time to run git-config from: real 0m0.263s user 0m0.260s sys 0m0.000s to: real 0m0.159s user 0m0.152s sys 0m0.004s for a savings of 39%. Most config files are not this big, but the savings should be proportional to the size of the file (i.e., we always save 39%, just of a much smaller number). Signed-off-by: NJeff King <peff@peff.net> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
- 06 2月, 2015 2 次提交
-
-
由 Jeff King 提交于
Our config code simulates a stdio stream around a buffer, but our fake ungetc() does not behave quite like the real one. In particular, we only rewind the position by one character, but do _not_ actually put the character from the caller into position. It turns out that this does not matter, because we only ever push back the character we just read. In other words, such an assignment would be a noop. But because the function is called ungetc, and because it takes a character parameter, it is a mistake waiting to happen. Actually assigning the character into the buffer would be ideal, but our pointer is actually a "const" copy of the buffer. We do not know who the real owner of the buffer is in this code, and would not want to munge their contents. Instead, we can simply add an assertion that matches what the current caller does, and will let us know if new callers are added that violate the contract. Signed-off-by: NJeff King <peff@peff.net> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Jeff King 提交于
When we are parsing a config value, if we see a carriage return, we fgetc the next character to see if it is a line feed (in which case we silently drop the CR). If it isn't, we then ungetc the character, and take the literal CR. But we never check whether we in fact got a character at all. If the config file ends in CR, we will get EOF here, and try to ungetc EOF. This works OK for a real stdio stream. The ungetc returns an error, and the next fgetc will then return EOF again. However, our custom buffer-based stream is not so fortunate. It happily rewinds the position of the stream by one character, ignoring the fact that we fed it EOF. The next fgetc call returns the final CR again, over and over, and we end up in an infinite loop. Signed-off-by: NJeff King <peff@peff.net> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
- 14 1月, 2015 1 次提交
-
-
由 Jeff King 提交于
This replaces "x ? xstrdup(x) : NULL" with xstrdup_or_null(x). The change is fairly mechanical, with the exception of resolve_refdup, which can eliminate a temporary variable. There are still a few hits grepping for "?.*xstrdup", but these are of slightly different forms and cannot be converted (e.g., "x ? xstrdup(x->foo) : NULL"). Signed-off-by: NJeff King <peff@peff.net> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
- 18 12月, 2014 2 次提交
-
-
由 Johannes Schindelin 提交于
The point of disallowing ".git" in the index is that we would never want to accidentally overwrite files in the repository directory. But this means we need to respect the filesystem's idea of when two paths are equal. The prior commit added a helper to make such a comparison for NTFS and FAT32; let's use it in verify_path(). We make this check optional for two reasons: 1. It restricts the set of allowable filenames, which is unnecessary for people who are not on NTFS nor FAT32. In practice this probably doesn't matter, though, as the restricted names are rather obscure and almost certainly would never come up in practice. 2. It has a minor performance penalty for every path we insert into the index. This patch ties the check to the core.protectNTFS config option. Though this is expected to be most useful on Windows, we allow it to be set everywhere, as NTFS may be mounted on other platforms. The variable does default to on for Windows, though. Signed-off-by: NJohannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Jeff King 提交于
The point of disallowing ".git" in the index is that we would never want to accidentally overwrite files in the repository directory. But this means we need to respect the filesystem's idea of when two paths are equal. The prior commit added a helper to make such a comparison for HFS+; let's use it in verify_path. We make this check optional for two reasons: 1. It restricts the set of allowable filenames, which is unnecessary for people who are not on HFS+. In practice this probably doesn't matter, though, as the restricted names are rather obscure and almost certainly would never come up in practice. 2. It has a minor performance penalty for every path we insert into the index. This patch ties the check to the core.protectHFS config option. Though this is expected to be most useful on OS X, we allow it to be set everywhere, as HFS+ may be mounted on other platforms. The variable does default to on for OS X, though. Signed-off-by: NJeff King <peff@peff.net> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
- 18 11月, 2014 1 次提交
-
-
由 René Scharfe 提交于
Using abs() on long values can cause truncation, so use labs() instead. Reported by Clang 3.5 (-Wabsolute-value, enabled by -Wall). Signed-off-by: NRene Scharfe <l.s.r@web.de> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
- 02 10月, 2014 3 次提交
-
-
由 Michael Haggerty 提交于
Move the interface declaration for the functions in lockfile.c from cache.h to a new file, lockfile.h. Add #includes where necessary (and remove some redundant includes of cache.h by files that already include builtin.h). Move the documentation of the lock_file state diagram from lockfile.c to the new header file. Signed-off-by: NMichael Haggerty <mhagger@alum.mit.edu> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Michael Haggerty 提交于
For now, we still make sure to allocate at least PATH_MAX characters for the strbuf because resolve_symlink() doesn't know how to expand the space for its return value. (That will be fixed in a moment.) Another alternative would be to just use a strbuf as scratch space in lock_file() but then store a pointer to the naked string in struct lock_file. But lock_file objects are often reused. By reusing the same strbuf, we can avoid having to reallocate the string most times when a lock_file object is reused. Helped-by: NTorsten Bögershausen <tboegi@web.de> Signed-off-by: NMichael Haggerty <mhagger@alum.mit.edu> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Michael Haggerty 提交于
After commit_lock_file() is called, then the lock_file object is necessarily either committed or rolled back. So there is no need to call rollback_lock_file() again in either of these cases. Signed-off-by: NMichael Haggerty <mhagger@alum.mit.edu> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
- 12 9月, 2014 1 次提交
-
-
由 Jeff King 提交于
Introduce CONFIG_REGEX_NONE as a more explicit sentinel value to say "we do not want to replace any existing entry" and use it in the implementation of "git config --add". Signed-off-by: NJeff King <peff@peff.net> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
- 03 9月, 2014 1 次提交
-
-
由 René Scharfe 提交于
Instead of using skip_prefix() to check the first part of the string and then strcmp() to check the rest, simply use strcmp() to check the whole string. Signed-off-by: NRene Scharfe <l.s.r@web.de> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
- 29 8月, 2014 1 次提交
-
-
由 Steffen Prohaska 提交于
The new function parses an integeral value that fits in unsigned long in human readable form, i.e. possibly with unit suffix, e.g. 10k = 10240, etc., from an environment variable. Parsing of GIT_MMAP_LIMIT and GIT_ALLOC_LIMIT will use it in later patches. Signed-off-by: NSteffen Prohaska <prohaska@zib.de> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
- 19 8月, 2014 1 次提交
-
-
由 Tanay Abhra 提交于
Currently if we have a config file like, [foo] baz bar = and we try something like, "git config --add foo.baz roll", Git will segfault. Moreover, for "git config --add foo.bar roll", it will overwrite the original value instead of appending after the existing empty value. The problem lies with the regexp used for simulating --add in `git_config_set_multivar_in_file()`, "^$", which in ideal case should not match with any string but is true for empty strings. Instead use a regexp like "a^" which can not be true for any string, empty or not. For removing the segfault add a check for NULL values in `matches()` in config.c. Signed-off-by: NTanay Abhra <tanayabh@gmail.com> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
- 08 8月, 2014 6 次提交
-
-
由 Tanay Abhra 提交于
Of all the functions in `git_config*()` family, `git_config()` has the most invocations in the whole code base. Each `git_config()` invocation causes config file rereads which can be avoided using the config-set API. Use the config-set API to rewrite `git_config()` to use the config caching layer to avoid config file rereads on each invocation during a git process lifetime. First invocation constructs the cache, and after that for each successive invocation, `git_config()` feeds values from the config cache instead of rereading the configuration files. Signed-off-by: NTanay Abhra <tanayabh@gmail.com> Reviewed-by: NMatthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Tanay Abhra 提交于
Add `git_die_config` that dies printing the line number and the file name of the highest priority value for the configuration variable `key`. A custom error message is also printed before dying, specified by the caller, which can be skipped if `err` argument is set to NULL. It has usage in non-callback based config value retrieval where we can raise an error and die if there is a semantic error. For example, if (!git_config_get_value(key, &value)){ if (!strcmp(value, "foo")) git_config_die(key, "value: `%s` is illegal", value); else /* do work */ } Signed-off-by: NTanay Abhra <tanayabh@gmail.com> Reviewed-by: NMatthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Tanay Abhra 提交于
Currently `git_config()` returns an integer signifying an error code. During rewrites of the function most of the code was shifted to `git_config_with_options()`. `git_config_with_options()` normally returns positive values if its `config_source` parameter is set as NULL, as most errors are fatal, and non-fatal potential errors are guarded by "if" statements that are entered only when no error is possible. Still a negative value can be returned in case of race condition between `access_or_die()` & `git_config_from_file()`. Also, all callers of `git_config()` ignore the return value except for one case in branch.c. Change `git_config()` return value to void and make it die if it receives a negative value from `git_config_with_options()`. Original-patch-by: NMatthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: NTanay Abhra <tanayabh@gmail.com> Reviewed-by: NMatthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Tanay Abhra 提交于
Store file name and line number for each key-value pair in the cache during parsing of the configuration files. Signed-off-by: NTanay Abhra <tanayabh@gmail.com> Reviewed-by: NMatthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Matthieu Moy 提交于
If a callback returns a negative value to `git_config*()` family, they call `die()` while printing the line number and the file name. Currently the printed line number is off by one, thus printing the wrong line number. Make `linenr` point to the line we just parsed during the call to callback to get accurate line number in error messages. Commit-message-by: NTanay Abhra <tanayabh@gmail.com> Signed-off-by: NTanay Abhra <tanayabh@gmail.com> Signed-off-by: NMatthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Matthieu Moy 提交于
Signed-off-by: NMatthieu Moy <Matthieu.Moy@imag.fr> Reviewed-by: NMatthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
- 06 8月, 2014 1 次提交
-
-
由 Junio C Hamano 提交于
In a config file, you can do: [foo] bar to turn the "foo.bar" boolean flag on, and you can do: [foo] bar= to set "foo.bar" to the empty string. However, git's "-c" parameter treats both: git -c foo.bar and git -c foo.bar= as the boolean flag, and there is no way to set a variable to the empty string. This patch enables the latter form to do that. Signed-off-by: NJeff King <peff@peff.net> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
- 30 7月, 2014 1 次提交
-
-
由 Tanay Abhra 提交于
Currently `git_config()` uses a callback mechanism and file rereads for config values. Due to this approach, it is not uncommon for the config files to be parsed several times during the run of a git program, with different callbacks picking out different variables useful to themselves. Add a `config_set`, that can be used to construct an in-memory cache for config-like files that the caller specifies (i.e., files like `.gitmodules`, `~/.gitconfig` etc.). Add two external functions `git_configset_get_value` and `git_configset_get_value_multi` for querying from the config sets. `git_configset_get_value` follows `last one wins` semantic (i.e. if there are multiple matches for the queried key in the files of the configset the value returned will be the last entry in `value_list`). `git_configset_get_value_multi` returns a list of values sorted in order of increasing priority (i.e. last match will be at the end of the list). Add type specific query functions like `git_configset_get_bool` and similar. Add a default `config_set`, `the_config_set` to cache all key-value pairs read from usual config files (repo specific .git/config, user wide ~/.gitconfig, XDG config and the global /etc/gitconfig). `the_config_set` is populated using `git_config()`. Add two external functions `git_config_get_value` and `git_config_get_value_multi` for querying in a non-callback manner from `the_config_set`. Also, add type specific query functions that are implemented as a thin wrapper around the `config_set` API. Signed-off-by: NMatthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: NTanay Abhra <tanayabh@gmail.com> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
- 25 7月, 2014 1 次提交
-
-
由 Jeff King 提交于
When we see the core.commentchar config option, we extract the string with git_config_string, which does two things: 1. It complains via config_error_nonbool if there is no string value. 2. It makes a copy of the string. Since we immediately parse the string into its single-character value, we only care about (1). And in fact (2) is a detriment, as it means we leak the copy. Instead, let's just check the pointer value ourselves, and parse directly from the const string we already have. Signed-off-by: NJeff King <peff@peff.net> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
- 17 7月, 2014 1 次提交
-
-
由 Karsten Blees 提交于
There is no fchmod() on native Windows platforms (MinGW and MSVC), and the equivalent Win32 API (SetFileInformationByHandle) requires Windows Vista. Use chmod() instead. Signed-off-by: NKarsten Blees <blees@dcon.de> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
- 21 6月, 2014 1 次提交
-
-
由 Jeff King 提交于
The skip_prefix() function returns a pointer to the content past the prefix, or NULL if the prefix was not found. While this is nice and simple, in practice it makes it hard to use for two reasons: 1. When you want to conditionally skip or keep the string as-is, you have to introduce a temporary variable. For example: tmp = skip_prefix(buf, "foo"); if (tmp) buf = tmp; 2. It is verbose to check the outcome in a conditional, as you need extra parentheses to silence compiler warnings. For example: if ((cp = skip_prefix(buf, "foo")) /* do something with cp */ Both of these make it harder to use for long if-chains, and we tend to use starts_with() instead. However, the first line of "do something" is often to then skip forward in buf past the prefix, either using a magic constant or with an extra strlen(3) (which is generally computed at compile time, but means we are repeating ourselves). This patch refactors skip_prefix() to return a simple boolean, and to provide the pointer value as an out-parameter. If the prefix is not found, the out-parameter is untouched. This lets you write: if (skip_prefix(arg, "foo ", &arg)) do_foo(arg); else if (skip_prefix(arg, "bar ", &arg)) do_bar(arg); Signed-off-by: NJeff King <peff@peff.net> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
- 28 5月, 2014 1 次提交
-
-
由 Brian Gesiak 提交于
xcalloc() takes two arguments: the number of elements and their size. config.c includes several calls to xcalloc() that pass the arguments in reverse order: the size of a struct lock_file*, followed by the number to allocate. Rearrange them so they are in the correct order. Signed-off-by: NBrian Gesiak <modocache@gmail.com> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-