- 11 11月, 2009 1 次提交
-
-
由 Björn Gustavsson 提交于
Jeff King recently reinstated -p to suppress the default diffstat (as -p used to work before 68daa64d, about 14 months ago). However, -p is also needed in combination with certain options (e.g. --stat or --numstat) in order to produce any patch at all. The documentation does not mention this. Since the purpose of format-patch is to produce a patch that can be emailed, it does not make sense that certain combination of options will suppress the generation of the patch itself. Therefore: * Update 'git format-patch' to always generate a patch. * Since the --name-only, --name-status, and --check suppresses the generation of the patch, disallow those options, and remove the description of them in the documentation. * Remove the reference to -p in the description of -U. * Remove the descriptions of the options that are synonyms for -p plus another option (--patch-with-raw and --patch-with-stat). * While at it, slightly tweak the description of -p itself to say that it generates "plain patches", so that you can think of -p as "plain patch" as an mnemonic aid. Signed-off-by: NBjörn Gustavsson <bgustavsson@gmail.com> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
- 09 11月, 2009 1 次提交
-
-
由 Jeff King 提交于
Once upon a time, format-patch would use its default stat plus patch format only when no diff format was given on the command line. This meant that "format-patch -p" would suppress the stat and show just the patch. Commit 68daa64d changed this to keep the stat format when we had an "implicit" patch format, like "-U5". As a side effect, this meant that an explicit patch format was now ignored (because cmd_format_patch didn't know the reason that the format was set way down in diff_opt_parse). This patch unbreaks what 68daa64d did (while still preserving what 68daa64d was trying to do), reinstating "-p" to suppress the default behavior. We do this by parsing "-p" ourselves in format-patch, and noting whether it was used explicitly. Signed-off-by: NJeff King <peff@peff.net> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
- 10 10月, 2009 20 次提交
-
-
由 Junio C Hamano 提交于
Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Simon Arlott 提交于
Hide find_parent_branch logging when -qq is specified. This eliminates more unnecessary output when run from cron, e.g.: Found possible branch point: http://undernet-ircu.svn.sourceforge.net/svnroot/undernet-ircu/ircu2/trunk => http://undernet-ircu.svn.sourceforge.net/svnroot/undernet-ircu/ircu2/branches/authz, 1919 Found branch parent: (authz) ea061d76aea985dc0208d36fa5e0b2249b698557 Following parent with do_switch Successfully followed parent Acked-by: NEric Wong <normalperson@yhbt.net> Signed-off-by: NSimon Arlott <simon@fire.lp0.eu> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Jonathan Nieder 提交于
When saying the initial branch is equal to the currently active remote branch, it is probably intended that the branch heads point to the same commit. Maybe it would be more useful to a new user to emphasize that the tree contents and history are the same. More important, probably, is that this new branch is set up so that "git pull" merges changes from the corresponding remote branch. The next paragraph addresses that directly. What the reader needs to know to begin with is that (1) the initial branch is your own; if you do not pull, it won't get updated, and that (2) the initial branch starts out at the same commit as the upstream. Signed-off-by: NJonathan Nieder <jrnieder@gmail.com> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Junio C Hamano 提交于
* rs/maint-archive-prefix: Git archive and trailing "/" in prefix
-
由 Junio C Hamano 提交于
* fc/mutt-alias: send-email: fix mutt regex for grouped aliases
-
由 Junio C Hamano 提交于
* ef/msvc-noreturn: add NORETURN_PTR for function pointers increase portability of NORETURN declarations
-
由 Junio C Hamano 提交于
* jk/reflog-date: improve reflog date/number heuristic
-
由 Junio C Hamano 提交于
* ch/am-header: git-am: force egrep to use correct characters set git-am: fixed patch_format detection according to RFC2822
-
由 Björn Gustavsson 提交于
Signed-off-by: NBjörn Gustavsson <bgustavsson@gmail.com> Acked-by: NShawn O. Pearce <spearce@spearce.org> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Stephen Boyd 提交于
Aliases with newlines have been a problem since commit 56fc25f2 (Bash completion support for remotes in .git/config., 2006-11-05). The chance of the problem occurring has been slim at best, until commit 518ef8f0 (completion: Replace config --list with --get-regexp, 2009-09-11) removed the case statement introduced by commit 56fc25f2. Before removing the case statement, most aliases with newlines would work unless they were specially crafted as follows [alias] foo = "log -1 --pretty='format:%s\nalias.error=broken'" After removing the case statement, a more benign alias like [alias] whowhat = "log -1 --pretty='format:%an <%ae>\n%s'" wont-complete = ... would cause the completion to break badly. For now, revert the removal of the case statement until someone comes up with a better way to get keys from git-config. Signed-off-by: NStephen Boyd <bebarino@gmail.com> Acked-by: NShawn O. Pearce <spearce@spearce.org> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Stephen Boyd 提交于
After commit 511a3fc1 (wrap git's main usage string., 2009-09-12), the bash completion for git commands includes COMMAND and [ARGS] when it shouldn't. Fix this by grepping more strictly for a line with git commands. It's doubtful whether git will ever have commands starting with anything besides numbers and letters so this should be fine. At least by being stricter we'll know when we break the completion earlier. Signed-off-by: NStephen Boyd <bebarino@gmail.com> Acked-by: NShawn O. Pearce <spearce@spearce.org> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Ingmar Vanhassel 提交于
This fixes an obvious syntax error that snuck in commit 7e787953: syntax error at /home/ingmar/bin//git-import-tars line 143, near "/^$/ { " syntax error at /home/ingmar/bin//git-import-tars line 145, near "} else" syntax error at /home/ingmar/bin//git-import-tars line 152, near "}" Signed-off-by: NIngmar Vanhassel <ingmar@exherbo.org> Acked-and-Tested-by: NPeter Krefting <peter@softwolves.pp.se> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Jonathan Nieder 提交于
Idealists may want USE_NSEC to be the default on Linux some day. Point to a patch to better explain the requirements on filesystem code for that to happen. Signed-off-by: NJonathan Nieder <jrnieder@gmail.com> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Jonathan Nieder 提交于
It is not necessarily obvious to a git novice what it means for a filesystem tree to be equal to the HEAD. Spell it out. Signed-off-by: NJonathan Nieder <jrnieder@gmail.com> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Jonathan Nieder 提交于
The documentation seems to assume that the starting point for a new branch is the tip of an existing (ordinary) branch, but that is not the most common case. More often, "git branch" is used to begin a branch from a remote-tracking branch, a tag, or an interesting commit (e.g. origin/pu^2). Clarify the language so it can apply to these cases. Thanks to Sean Estabrooks for the wording. Also add a pointer to the user's manual for the bewildered. Signed-off-by: NJonathan Nieder <jrnieder@gmail.com> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Jonathan Nieder 提交于
Update the documentation for --merged and --no-merged to explain the meaning of the optional parameter introduced in commit 049716b3 (branch --merged/--no-merged: allow specifying arbitrary commit, 2008-07-08). Signed-off-by: NJonathan Nieder <jrnieder@gmail.com> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Jonathan Nieder 提交于
Sounds better this way, at least to my ears. ("The syntax and supported options of git merge" is a plural noun. "the same" instead of "equal" sounds less technical and seems to convey the meaning better here.) Signed-off-by: NJonathan Nieder <jrnieder@gmail.com> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Jonathan Nieder 提交于
The fmt-merge-message builtin can be invoked as "git fmt-merge-msg" rather than through the hard link in GIT_EXEC_PATH. Although this is unlikely to confuse most script writers, it should not hurt to make the documentation a little clearer anyway. Signed-off-by: NJonathan Nieder <jrnieder@gmail.com> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Jonathan Nieder 提交于
There is excellent documentation for these options in Documentation/Makefile, but some users may never find it. Signed-off-by: NJonathan Nieder <jrnieder@gmail.com> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Jeff King 提交于
There are several reasons a git-pull invocation might not have anything marked for merge: 1. We're not on a branch, so there is no branch configuration. 2. We're on a branch, but there is no configuration for this branch. 3. We fetched from the configured remote, but the configured branch to merge didn't get fetched (either it doesn't exist, or wasn't part of the fetch refspec). 4. We fetched from the non-default remote, but didn't specify a branch to merge. We can't use the configured one because it applies to the default remote. 5. We fetched from a specified remote, and a refspec was given, but it ended up not fetching anything (this is actually hard to do; if the refspec points to a remote branch and it doesn't exist, then fetch will fail and we never make it to this code path. But if you provide a wildcard refspec like refs/bogus/*:refs/remotes/origin/* then you can see this failure). We have handled (1) and (2) for some time. Recently, commit a6dbf881 added code to handle case (3). This patch handles cases (4) and (5), which previously just fell under other cases, producing a confusing message. While we're at it, let's rewrap the text for case (3), which looks terribly ugly as it is. Signed-off-by: NJeff King <peff@peff.net> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
- 09 10月, 2009 11 次提交
-
-
git://git.bogomips.org/git-svn由 Junio C Hamano 提交于
* git://git.bogomips.org/git-svn: git-svn: Avoid spurious errors when rewriteRoot is used.
-
由 Alexander Gavrilov 提交于
After doing a rebase, git-svn checks that the SVN URL is what it expects. However, it does not account for rewriteRoot, which is a legitimate way for the URL to change. This produces a lot of spurious errors. [ew: fixed line wrapping] Signed-off-by: NAlexander Gavrilov <angavrilov@gmail.com> Acked-by: NEric Wong <normalperson@yhbt.net>
-
由 Junio C Hamano 提交于
* ms/msvc: Fix the exit code of MSVC build scripts on cygwin Fix MSVC build on cygwin
-
由 Junio C Hamano 提交于
-
由 Junio C Hamano 提交于
* maint: ls-files: die instead of fprintf/exit in -i error
-
由 Brandon Casey 提交于
When git is compiled with the MIPSpro 7.4.4m compiler, and NO_PTHREADS is set, and NO_MMAP is _not_ set, then git segfaults when trying to access the first entry in a reflog. If NO_PTHREADS is not set (which implies that the pthread library is linked in), or NO_MMAP _is_ set, then the segfault is not encountered. The conservative choice has been made to set NO_MMAP in the Makefile to avoid this flaw. The GNU C compiler does not produce this behavior. The segfault happens in refs.c:read_ref_at(). The mmap succeeds, and the loop is executed properly until rec is rewound into the first line (reflog entry) of the file. The segfault is caught by test 28 of t1400-update-ref.sh which fails when 'git rev-parse --verify "master@{May 25 2005}"' is called. So, add a comment in the Makefile to describe why NO_MMAP is set and as a hint to those who may be interested in unsetting it. Signed-off-by: NBrandon Casey <casey@nrlssc.navy.mil> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Ben Walton 提交于
When ls-files was called with -i but no exclude pattern, it was calling fprintf(stderr, "...", NULL) and then exiting. On Solaris, passing NULL into fprintf was causing a segfault. On glibc systems, it was simply producing incorrect output (eg: "(null)": ...). The NULL pointer was a result of argv[0] not being preserved by the option parser. Instead of requesting that the option parser preserve argv[0], use die() with a constant string. A trigger for this bug was: `git ls-files -i` Signed-off-by: NBen Walton <bwalton@artsci.utoronto.ca> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Brandon Casey 提交于
Since commit dcda3614 removed the use of a variable length array from builtin-pack-objects.c, it is now safe to compile with the threaded delta search feature enabled. Formerly, the MIPSpro 7.4.4m compiler warned that variable length arrays should not be used with pthreads. Signed-off-by: NBrandon Casey <casey@nrlssc.navy.mil> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Ramsay Jones 提交于
During an MSVC build on cygwin, the make program did not notice when the compiler or linker exited with an error. This was caused by the scripts exiting with the value returned by system() directly. On POSIX-like systems, such as cygwin, the return value of system() has the exit code of the executed command encoded in the first byte (ie the value is shifted up by 8 bits). This allows the bottom 7 bits to contain the signal number of a terminated process, while the eighth bit indicates whether a core-dump was produced. (A value of -1 indicates that the command failed to execute.) The make program, however, expects the exit code to be encoded in the bottom byte. Futhermore, it apparently masks off and ignores anything in the upper bytes. However, these scripts are (naturally) intended to be used on the windows platform, where we can not assume POSIX-like semantics from a perl implementation (eg ActiveState). So, in general, we can not assume that shifting the return value right by eight will get us the exit code. In order to improve portability, we assume that a zero return from system() indicates success, whereas anything else indicates failure. Since we don't need to know the exact exit code from the compiler or linker, we simply exit with 0 (success) or 1 (failure). Signed-off-by: NRamsay Jones <ramsay@ramsay1.demon.co.uk> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Ramsay Jones 提交于
In the MSVC section of the Makefile, BASIC_CFLAGS is set to a value which contains the string "-DWIN32-D_CONSOLE". This results in a (single) malformed -Define being passed to the compiler. At least on my cygwin installation, the msvc compiler seems to ignore this parameter, without issuing an error or warning, and results in the WIN32 and _CONSOLE macros being undefined. This breaks the build. In order to fix the build, we simply insert a space between the two -Define parameters, "-DWIN32" and "-D_CONSOLE", as originally intended. Signed-off-by: NRamsay Jones <ramsay@ramsay1.demon.co.uk> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 René Scharfe 提交于
With --prefix=string that does not end with a slash, the top-level entries are written out with the specified prefix as expected, but no paths in the directories are added. Fix this by adding the prefix in write_archive_entry() instead of letting get_pathspec() and read_tree_recursive() pair; they are designed to only handle prefixes that are path components. Signed-off-by: NRene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
- 08 10月, 2009 6 次提交
-
-
由 Stephen Boyd 提交于
Signed-off-by: NStephen Boyd <bebarino@gmail.com> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Stephen Boyd 提交于
git am learned --scissors, git commit learned --dry-run and git log learned --decorate=long|short recently. Signed-off-by: NStephen Boyd <bebarino@gmail.com> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Brandon Casey 提交于
Signed-off-by: NBrandon Casey <casey@nrlssc.navy.mil> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Junio C Hamano 提交于
* maint: fast-import.c::validate_raw_date(): really validate the value
-
由 Junio C Hamano 提交于
When reading the "raw format" timestamp from the input stream, make sure that the timezone offset is a reasonable value by imitating 7122f82f (date.c: improve guess between timezone offset and year., 2006-06-08). We _might_ want to also check if the timestamp itself is reasonable, but that is left for a separate commit. Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
http://git-scm.com由 Stefan Naewe 提交于
Signed-off-by: NStefan Naewe <stefan.naewe+git@gmail.com> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
- 06 10月, 2009 1 次提交
-
-
由 Junio C Hamano 提交于
Back when a74b1706 (git-pull: disallow implicit merging to detached HEAD, 2007-01-15) added this check, $? referred to the error status of reading HEAD as a symbolic-ref; but cd67e4d4 (Teach 'git pull' about --rebase, 2007-11-28) moved the command away from where the check is, and nobody noticed the breakage. Ever since, $? has always been 0 (tr at the end of the pipe to find merge_head never fails) and other case arms were never reached. These days, error_on_no_merge_candidates function is prepared to handle a detached HEAD case, which was what the code this patch removes used to handle. Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-