- 14 2月, 2012 7 次提交
-
-
EEH may happen during a PCI driver probe. If the driver is trying to access some register in a loop, the EEH code will try to print the driver name. But the driver pointer in struct pci_dev is not set until probe returns successfully. Use a function to test if the device and the driver pointer is NULL before accessing the driver's name. Signed-off-by: NThadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Brian King 提交于
This fixes a hang that was observed during live partition migration. Since stop_topology_update must not be called from an interrupt context, call it earlier in the migration process. The hang observed can be seen below: WARNING: at kernel/timer.c:1011 Modules linked in: ip6t_LOG xt_tcpudp xt_pkttype ipt_LOG xt_limit ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ipv6 ip6table_raw xt_NOTRACK ipt_REJECT xt_state iptable_raw iptable_filter ip6table_mangle nf_conntrack_netbios_ns nf_conntrack_broadcast nf_conntrack_ipv4 nf_conntrack nf_defrag_ipv4 ip_tables ip6table_filter ip6_tables x_tables ipv6 fuse loop ibmveth sg ext3 jbd mbcache raid456 async_raid6_recov async_pq raid6_pq async_xor xor async_memcpy async_tx raid10 raid1 raid0 scsi_dh_alua scsi_dh_rdac scsi_dh_hp_sw scsi_dh_emc dm_round_robin dm_multipath scsi_dh sd_mod crc_t10dif ibmvfc scsi_transport_fc scsi_tgt scsi_mod dm_snapshot dm_mod NIP: c0000000000c52d8 LR: c00000000004be28 CTR: 0000000000000000 REGS: c00000005ffd77d0 TRAP: 0700 Not tainted (3.2.0-git-00001-g07d106d0) MSR: 8000000000021032 <ME,CE,IR,DR> CR: 48000084 XER: 00000001 CFAR: c00000000004be20 TASK = c00000005ec78860[0] 'swapper/3' THREAD: c00000005ec98000 CPU: 3 GPR00: 0000000000000001 c00000005ffd7a50 c000000000fbbc98 c000000000ec8340 GPR04: 00000000282a0020 0000000000000000 0000000000004000 0000000000000101 GPR08: 0000000000000012 c00000005ffd4000 0000000000000020 c000000000f3ba88 GPR12: 0000000000000000 c000000007f40900 0000000000000001 0000000000000004 GPR16: 0000000000000001 0000000000000000 0000000000000000 c000000001022310 GPR20: 0000000000000001 0000000000000000 0000000000200200 c000000001029e14 GPR24: 0000000000000000 0000000000000001 0000000000000040 c00000003f74bc80 GPR28: c00000003f74bc84 c000000000f38038 c000000000f16b58 c000000000ec8340 NIP [c0000000000c52d8] .del_timer_sync+0x28/0x60 LR [c00000000004be28] .stop_topology_update+0x20/0x38 Call Trace: [c00000005ffd7a50] [c00000005ec78860] 0xc00000005ec78860 (unreliable) [c00000005ffd7ad0] [c00000000004be28] .stop_topology_update+0x20/0x38 [c00000005ffd7b40] [c000000000028378] .__rtas_suspend_last_cpu+0x58/0x260 [c00000005ffd7bf0] [c0000000000fa230] .generic_smp_call_function_interrupt+0x160/0x358 [c00000005ffd7cf0] [c000000000036ec8] .smp_ipi_demux+0x88/0x100 [c00000005ffd7d80] [c00000000005c154] .icp_hv_ipi_action+0x5c/0x80 [c00000005ffd7e00] [c00000000012a088] .handle_irq_event_percpu+0x100/0x318 [c00000005ffd7f00] [c00000000012e774] .handle_percpu_irq+0x84/0xd0 [c00000005ffd7f90] [c000000000022ba8] .call_handle_irq+0x1c/0x2c [c00000005ec9ba20] [c00000000001157c] .do_IRQ+0x22c/0x2a8 [c00000005ec9bae0] [c0000000000054bc] hardware_interrupt_entry+0x18/0x1c Exception: 501 at .cpu_idle+0x194/0x2f8 LR = .cpu_idle+0x194/0x2f8 [c00000005ec9bdd0] [c000000000017e58] .cpu_idle+0x188/0x2f8 (unreliable) [c00000005ec9be90] [c00000000067ec18] .start_secondary+0x3e4/0x524 [c00000005ec9bf90] [c0000000000093e8] .start_secondary_prolog+0x10/0x14 Instruction dump: ebe1fff8 4e800020 fbe1fff8 7c0802a6 f8010010 7c7f1b78 f821ff81 78290464 80090014 5400019e 7c0000d0 78000fe0 <0b000000> 4800000c 7c210b78 7c421378 Signed-off-by: NBrian King <brking@linux.vnet.ibm.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Michael Ellerman 提交于
We need to disable interrupts when taking the phb->lock. Otherwise we could deadlock with pci_lock taken from an interrupt. Signed-off-by: NMichael Ellerman <michael@ellerman.id.au> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Benjamin Herrenschmidt 提交于
We use __get_cpu_var() which triggers a false positive warning in smp_processor_id() thinking interrupts are enabled (at this point, they are soft-enabled but hard-disabled). Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Benjamin Herrenschmidt 提交于
We call the cache_hwirq_map() function with a linux IRQ number but it expects a HW irq number. This triggers a BUG on multic-chip setups in addition to not doing the right thing. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Srikar Dronamraju 提交于
With this change, helpers such as instruction_pointer() et al, get defined in the generic header in terms of GET_IP Removed the unnecessary definition of profile_pc in !CONFIG_SMP case as suggested by Mike Frysinger. Signed-off-by: NSrikar Dronamraju <srikar@linux.vnet.ibm.com> Signed-off-by: NAnanth N Mavinakayanahalli <ananth@in.ibm.com> Acked-by: NMike Frysinger <vapier@gentoo.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Benjamin Herrenschmidt 提交于
It appears that on the Chroma card, the class code of the root complex is still wrong even on DD2 or later chips. This could be a firmware issue, but that breaks resource allocation so let's unconditionally fix it up. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
- 12 2月, 2012 1 次提交
-
-
git://git.kernel.dk/linux-block由 Linus Torvalds 提交于
Says Jens: "Time to push off some of the pending items. I really wanted to wait until we had the regression nailed, but alas it's not quite there yet. But I'm very confident that it's "just" a missing expire on exit, so fix from Tejun should be fairly trivial. I'm headed out for a week on the slopes. - Killing the barrier part of mtip32xx. It doesn't really support barriers, and it doesn't need them (writes are fully ordered). - A few fixes from Dan Carpenter, preventing overflows of integer multiplication. - A fixup for loop, fixing a previous commit that didn't quite solve the partial read problem from Dave Young. - A bio integer overflow fix from Kent Overstreet. - Improvement/fix of the door "keep locked" part of the cdrom shared code from Paolo Benzini. - A few cfq fixes from Shaohua Li. - A fix for bsg sysfs warning when removing a file it did not create from Stanislaw Gruszka. - Two fixes for floppy from Vivek, preventing a crash. - A few block core fixes from Tejun. One killing the over-optimized ioc exit path, cleaning that up nicely. Two others fixing an oops on elevator switch, due to calling into the scheduler merge check code without holding the queue lock." * 'for-linus' of git://git.kernel.dk/linux-block: block: fix lockdep warning on io_context release put_io_context() relay: prevent integer overflow in relay_open() loop: zero fill bio instead of return -EIO for partial read bio: don't overflow in bio_get_nr_vecs() floppy: Fix a crash during rmmod floppy: Cleanup disk->queue before caling put_disk() if add_disk() was never called cdrom: move shared static to cdrom_device_info bsg: fix sysfs link remove warning block: don't call elevator callbacks for plug merges block: separate out blk_rq_merge_ok() and blk_try_merge() from elevator functions mtip32xx: removed the irrelevant argument of mtip_hw_submit_io() and the unused member of struct driver_data block: strip out locking optimization in put_io_context() cdrom: use copy_to_user() without the underscores block: fix ioc locking warning block: fix NULL icq_cache reference block,cfq: change code order
-
- 11 2月, 2012 11 次提交
-
-
由 Tejun Heo 提交于
11a3122f "block: strip out locking optimization in put_io_context()" removed ioc_lock depth lockdep annoation along with locking optimization; however, while recursing from put_io_context() is no longer possible, ioc_release_fn() may still end up putting the last reference of another ioc through elevator, which wlil grab ioc->lock triggering spurious (as the ioc is always different one) A-A deadlock warning. As this can only happen one time from ioc_release_fn(), using non-zero subclass from ioc_release_fn() is enough. Use subclass 1. Signed-off-by: NTejun Heo <tj@kernel.org> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net由 Linus Torvalds 提交于
Quoth David: 1) GRO MAC header comparisons were ethernet specific, breaking other link types. This required a multi-faceted fix to cure the originally noted case (Infiniband), because IPoIB was lying about it's actual hard header length. Thanks to Eric Dumazet, Roland Dreier, and others. 2) Fix build failure when INET_UDP_DIAG is built in and ipv6 is modular. From Anisse Astier. 3) Off by ones and other bug fixes in netprio_cgroup from Neil Horman. 4) ipv4 TCP reset generation needs to respect any network interface binding from the socket, otherwise route lookups might give a different result than all the other segments received. From Shawn Lu. 5) Fix unintended regression in ipv4 proxy ARP responses, from Thomas Graf. 6) Fix SKB under-allocation bug in sh_eth, from Yoshihiro Shimoda. 7) Revert skge PCI mapping changes that are causing crashes for some folks, from Stephen Hemminger. 8) IPV4 route lookups fill in the wildcarded fields of the given flow lookup key passed in, which is fine most of the time as this is exactly what the caller's want. However there are a few cases that want to retain the original flow key values afterwards, so handle those cases properly. Fix from Julian Anastasov. 9) IGB/IXGBE VF lookup bug fixes from Greg Rose. 10) Properly null terminate filename passed to ethtool flash device method, from Ben Hutchings. 11) S3 resume fix in via-velocity from David Lv. 12) Fix double SKB free during xmit failure in CAIF, from Dmitry Tarnyagin. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (72 commits) net: Don't proxy arp respond if iif == rt->dst.dev if private VLAN is disabled ipv4: Fix wrong order of ip_rt_get_source() and update iph->daddr. netprio_cgroup: fix wrong memory access when NETPRIO_CGROUP=m netprio_cgroup: don't allocate prio table when a device is registered netprio_cgroup: fix an off-by-one bug bna: fix error handling of bnad_get_flash_partition_by_offset() isdn: type bug in isdn_net_header() net: Make qdisc_skb_cb upper size bound explicit. ixgbe: ethtool: stats user buffer overrun ixgbe: dcb: up2tc mapping lost on disable/enable CEE DCB state ixgbe: do not update real num queues when netdev is going away ixgbe: Fix broken dependency on MAX_SKB_FRAGS being related to page size ixgbe: Fix case of Tx Hang in PF with 32 VFs ixgbe: fix vf lookup igb: fix vf lookup e1000: add dropped DMA receive enable back in for WoL gro: more generic L2 header check IPoIB: Stop lying about hard_header_len and use skb->cb to stash LL addresses zd1211rw: firmware needs duration_id set to zero for non-pspoll frames net: enable TC35815 for MIPS again ...
-
由 Thomas Graf 提交于
Commit 653241 (net: RFC3069, private VLAN proxy arp support) changed the behavior of arp proxy to send arp replies back out on the interface the request came in even if the private VLAN feature is disabled. Previously we checked rt->dst.dev != skb->dev for in scenarios, when proxy arp is enabled on for the netdevice and also when individual proxy neighbour entries have been added. This patch adds the check back for the pneigh_lookup() scenario. Signed-off-by: NThomas Graf <tgraf@suug.ch> Acked-by: NJesper Dangaard Brouer <hawk@comx.dk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Li Wei 提交于
This patch fix a bug which introduced by commit ac8a4810 (ipv4: Save nexthop address of LSRR/SSRR option to IPCB.).In that patch, we saved the nexthop of SRR in ip_option->nexthop and update iph->daddr until we get to ip_forward_options(), but we need to update it before ip_rt_get_source(), otherwise we may get a wrong src. Signed-off-by: NLi Wei <lw@cn.fujitsu.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Neil Horman 提交于
When the netprio_cgroup module is not loaded, net_prio_subsys_id is -1, and so sock_update_prioidx() accesses cgroup_subsys array with negative index subsys[-1]. Make the code resembles cls_cgroup code, which is bug free. Origionally-authored-by: NLi Zefan <lizf@cn.fujitsu.com> Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com> Signed-off-by: NNeil Horman <nhorman@tuxdriver.com> CC: "David S. Miller" <davem@davemloft.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Neil Horman 提交于
So we delay the allocation till the priority is set through cgroup, and this makes skb_update_priority() faster when it's not set. This also eliminates an off-by-one bug similar with the one fixed in the previous patch. Origionally-authored-by: NLi Zefan <lizf@cn.fujitsu.com> Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com> Signed-off-by: NNeil Horman <nhorman@tuxdriver.com> CC: "David S. Miller" <davem@davemloft.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Neil Horman 提交于
# mount -t cgroup xxx /mnt # mkdir /mnt/tmp # cat /mnt/tmp/net_prio.ifpriomap lo 0 eth0 0 virbr0 0 # echo 'lo 999' > /mnt/tmp/net_prio.ifpriomap # cat /mnt/tmp/net_prio.ifpriomap lo 999 eth0 0 virbr0 4101267344 We got weired output, because we exceeded the boundary of the array. We may even crash the kernel.. Origionally-authored-by: NLi Zefan <lizf@cn.fujitsu.com> Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com> Signed-off-by: NNeil Horman <nhorman@tuxdriver.com> CC: "David S. Miller" <davem@davemloft.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://people.freedesktop.org/~airlied/linux由 Linus Torvalds 提交于
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/i915: fixup interlaced bits clearing in PIPECONF on PCH_SPLIT (v2) drm/i915: no lvds quirk for AOpen MP45 drm/i915: Force explicit bpp selection for intel_dp_link_required drm/radeon: do not continue after error from r600_ib_test drivers/gpu/drm/drm_ioc32.c: initialize all fields drm/i915: fixup interlaced bits clearing in PIPECONF on PCH_SPLIT drm/i915:: Disable FBC on SandyBridge
-
git://git.kernel.org/pub/scm/linux/kernel/git/wfg/linux由 Linus Torvalds 提交于
fix 1 mysterious divide error fix 3 NULL dereference bugs in writeback tracing, on SD card removal w/o umount * tag 'writeback-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/wfg/linux: writeback: fix dereferencing NULL bdi->dev on trace_writeback_queue lib: proportion: lower PROP_MAX_SHIFT to 32 on 64-bit kernel writeback: fix NULL bdi->dev in trace writeback_single_inode backing-dev: fix wakeup timer races with bdi_unregister()
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf: Fix double start/stop in x86_pmu_start() perf evsel: Fix an issue where perf report fails to show the proper percentage perf tools: Fix prefix matching for kernel maps perf tools: Fix perf stack to non executable on x86_64 perf: Remove deprecated WARN_ON_ONCE()
-
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging由 Linus Torvalds 提交于
Couple of regressions, couple of zero-day bugs, a minor enhancement. Nothing really major. * tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (f75375s) Let f75375_update_device treat pwmX as a measured value hwmon: (f75375s) Fix bit shifting in f75375_write16 hwmon: (f75375s) Fix reading of wrong register when initializing the F75387 hwmon: (f75375s) Fix automatic pwm mode setting for F75373 & F75375 hwmon: (w83627ehf) Remove duplicate code
-
- 10 2月, 2012 15 次提交
-
-
由 Dave Airlie 提交于
Merge branch 'drm-intel-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/keithp/linux into drm-fixes * 'drm-intel-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/keithp/linux: drm/i915: fixup interlaced bits clearing in PIPECONF on PCH_SPLIT (v2) drm/i915: no lvds quirk for AOpen MP45 drm/i915: Force explicit bpp selection for intel_dp_link_required drm/i915: fixup interlaced bits clearing in PIPECONF on PCH_SPLIT drm/i915:: Disable FBC on SandyBridge
-
由 Dan Carpenter 提交于
"subbuf_size" and "n_subbufs" come from the user and they need to be capped to prevent an integer overflow. Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Cc: stable@kernel.org Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty由 Linus Torvalds 提交于
Serial/TTY fixes for the 3.3-rc3 tree Just a few new device ids, omap serial driver regression fixes, and a build fix for the 8250 driver movement. Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> * tag 'tty-3.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: tty: serial: omap-serial: wakeup latency constraint is in microseconds, not milliseconds tty: serial: OMAP: block idle while the UART is transferring data in PIO mode tty: serial: OMAP: use a 1-byte RX FIFO threshold in PIO mode m32r: relocate drivers back out of 8250 dir tty: fix a build failure on sparc serial: samsung: Add support for EXYNOS5250 serial: samsung: Add support for EXYNOS4212 and EXYNOS4412 drivers/tty/vt/vt_ioctl.c: fix KDFONTOP 32bit compatibility layer
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging由 Linus Torvalds 提交于
Staging tree patches for 3.3-rc3 Big things here is the deletion of the Android pmem driver, as it's obsolete and no one uses it, the gma500 driver as it's already in the drm portion of the kernel tree, and the pohmelfs filesystem as it's obsolete and a rewritten version is being proposed for the fs/ section of the kernel. Other than that, a smattering of different bugfixes and regressions, and some omap drm api merge fixups that were needed due to api changes in the main portion of the drm tree, allowing this code to build properly again. Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> * tag 'staging-3.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (28 commits) staging: pohmelfs: remove drivers/staging/pohmelfs staging: android/ram_console: Don't build on arches w/o ioremap staging: r8712u: Use asynchronous firmware loading staging: usbip: fix to prevent potentially using uninitialized spinlock staging: r8712u: Fix problem when CONFIG_R8712_AP is set staging: tidspbridge: fix incorrect free to drv_datap staging: tidspbridge: fix bridge_open memory leaks staging: android: lowmemorykiller: Don't wait more than one second for a process to die MAINTAINERS: staging: iio: add iio information staging: zcache: fix serialization bug in zv stats staging: fix go7007-usb license Staging: android: binder: Fix crashes when sharing a binder file between processes Staging: android: Remove pmem driver Staging: asus_oled: fix NULL-ptr crash on unloading Staging: asus_oled: fix image processing Staging: android: binder: Don't call dump_stack in binder_vma_open staging: r8712u: Add new Sitecom UsB ID zcache: Set SWIZ_BITS to 8 to reduce tmem bucket lock contention. zcache: fix deadlock condition staging: drm/omap: fix locking issue ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core由 Linus Torvalds 提交于
Driver core fixes for the 3.3-rc3 tree. A few fixes for kobject warnings that have popped up in the cpu hotplug path, and a regression fix for the speed of the hotplug memory code. Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> * tag 'driver-core-3.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: driver-core: cpu: fix kobject warning when hotplugging a cpu ACPI: remove duplicated lines of merging problems with acpi_processor_add docbook: fix fatal errors in device-drivers docbook and add DMA Management section drivers/base/memory.c: fix memory_dev_init() long delay driver core: cpu: remove kernel warning when removing a cpu
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc由 Linus Torvalds 提交于
Minor char-misc fixes for 3.3-rc3 Nothing big here, some Kconfig fixes for the MISC_DEVICES config option that was being used incorrectly, and some other minor bug fixes. Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> * tag 'char-misc-3.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: mmc: cb710 core: Add missing spin_lock_init for irq_lock of struct cb710_chip cs5535-mfgpt: don't call __init function from __devinit vmw_balloon: fix for a -Wuninitialized warning drivers: misc: Remove MISC_DEVICES config option c2port: fix build error for duramar2150 due to missing header.
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb由 Linus Torvalds 提交于
USB fixes for 3.3-rc3 Here are a few minor USB fixes and a bunch of device id updates for the USB drivers. Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> * tag 'usb-3.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: USB: usbserial: add new PID number (0xa951) to the ftdi driver usb: ch9.h: usb_endpoint_maxp() uses __le16_to_cpu() usb: musb: fix a build error on mips uwb & wusb & usb wireless controllers: fix kconfig error & build errors usb: Skip PCI USB quirk handling for Netlogic XLP powerpc/usb: fix issue of CPU halt when missing USB PHY clock usb: otg: mv_otg: Add dependence usb: host: Distinguish Kconfig text for Freescale controllers USB: add new zte 3g-dongle's pid to option.c usb: ch9.h: usb_endpoint_maxp() uses __le16_to_cpu() USB: qcserial: don't enable autosuspend USB: qcserial: add several new serial devices usb: otg: mv_otg: Add dependence usb: gadget: zero: fix bug in loopback autoresume handling
-
由 Dan Carpenter 提交于
The current error handling doesn't work because we flash_part is a u32 so the checks for negative error codes don't work. I considered making things signed but I don't know the hardware enough to say if that's a problem. Really, we don't use the error codes so just returning zero for all problems is fine. Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dan Carpenter 提交于
We use len to store the return value from eth_header(). eth_header() can return -ETH_HLEN (-14). We want to pass this back instead of truncating it to 65522 and returning that. Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Acked-by: NNeil Horman <nhorman@tuxdriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nikolaus Schulz 提交于
Treat pwmX as a measured value, not as a (mostly static) limit value, so that it is updated more frequently from the device register. Signed-off-by: NNikolaus Schulz <mail@microschulz.de> Signed-off-by: NGuenter Roeck <guenter.roeck@ericsson.com>
-
由 David S. Miller 提交于
Just like skb->cb[], so that qdisc_skb_cb can be encapsulated inside of other data structures. This is intended to be used by IPoIB so that it can remember addressing information stored at hard_header_ops->create() time that it can fetch when the packet gets to the transmit routine. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Paul Walmsley 提交于
The receive FIFO wakeup latency estimate in the omap-serial driver is three orders of magnitude too small. This effectively prevents the MPU from going to a low-power state when CONFIG_CPU_IDLE=y. This is a major power management regression and masks some other FIFO-related bugs in the driver. Fix by correcting the most egregious problem in the RX wakeup latency estimate. There are several other flaws in the estimator; these will be fixed by a separate patch series intended for 3.4. The difference in low-power states with this patch can be observed via debugfs in pm_debug/count. This estimate does not have any effect when CONFIG_CPU_IDLE=n. Signed-off-by: NPaul Walmsley <paul@pwsan.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Alan Cox <alan@linux.intel.com> Acked-by: NGovindraj.R <govindraj.raja@ti.com> Reviewed-by: NKevin Hilman <khilman@ti.com> Tested-by: NKevin Hilman <khilman@ti.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Paul Walmsley 提交于
Prevent OMAP UARTs from going idle while they are still transferring data in PIO mode. This works around an oversight in the OMAP UART hardware present in OMAP34xx and earlier: an idle UART won't send a wakeup when the TX FIFO threshold is reached. This causes long delays during data transmission when the MPU powerdomain enters a low-power mode. The MPU interrupt controller is not able to respond to interrupts when it's in a low-power state, so the TX buffer is not refilled until another wakeup event occurs. This fix changes the erratum i291 DMA idle workaround. Rather than toggling between force-idle and no-idle, it will toggle between smart-idle and no-idle. The important part of the workaround is the no-idle part, so this shouldn't result in any change in behavior. This fix should work on all OMAP UARTs. Future patches intended for the 3.4 merge window will make this workaround conditional on a "feature" flag, and will use the OMAP36xx+ TX event wakeup support. Thanks to Kevin Hilman <khilman@ti.com> for mentioning the erratum i291 workaround, which led to the development of this approach. Signed-off-by: NPaul Walmsley <paul@pwsan.com> Cc: Alan Cox <alan@linux.intel.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: NGovindraj.R <govindraj.raja@ti.com> Reviewed-by: NKevin Hilman <khilman@ti.com> Tested-by: NKevin Hilman <khilman@ti.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Paul Walmsley 提交于
In the (default) PIO mode, use a one-byte RX FIFO threshold. The OMAP UART IP blocks do not appear to be capable of waking the system under an RX timeout condition. Since the previous RX FIFO threshold was 16 bytes, this meant that omap-serial.c did not become aware of any received data until all those bytes arrived or until another UART interrupt occurred. This made the serial console and presumably other serial applications (GPS, serial Bluetooth) unusable or extremely slow. A 1-byte RX FIFO threshold also allows the MPU to enter a low-power consumption state while waiting for the FIFO to fill. This can be verified using the serial console by comparing the behavior when "0123456789abcde" is pasted in from another window, with the behavior when "0123456789abcdef" is pasted in. Since the former string is less than sixteen bytes long, the string is not echoed for some time, while the latter string is echoed immediately. DMA operation is unaffected by this patch. Thanks to Russell King - ARM Linux <linux@arm.linux.org.uk> for some additional information on the standard behavior of the RX timeout event, which was used to improve this commit description. Signed-off-by: NPaul Walmsley <paul@pwsan.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Govindraj Raja <govindraj.r@ti.com> Cc: Alan Cox <alan@linux.intel.com> Cc: Russell King <linux@arm.linux.org.uk> Reviewed-by: NKevin Hilman <khilman@ti.com> Tested-by: NKevin Hilman <khilman@ti.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 David Howells 提交于
_parse_integer() does one or two division instructions (which are slow) per digit parsed to perform the overflow check. Furthermore, these are particularly expensive examples of division instruction as the number of clock cycles required to complete them may go up with the position of the most significant set bit in the dividend: if (*res > div_u64(ULLONG_MAX - val, base)) which is as maximal as possible. Worse, on 32-bit arches, more than one of these division instructions may be required per digit. So, assuming we don't support a base of more than 16, skip the check if the top nibble of the result is not set at this point. Signed-off-by: NDavid Howells <dhowells@redhat.com> [ Changed it to not dereference the pointer all the time - even if the compiler can and does optimize it away, the code just looks cleaner. And edited the top nybble test slightly to make the code generated on x86-64 better in the loop - test against a hoisted constant instead of shifting and testing the result ] Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 09 2月, 2012 6 次提交
-
-
由 John Fastabend 提交于
If the number of tx/rx queues changes the ethtool ioctl ETHTOOL_GSTATS may overrun the userspace buffer. This occurs because the general practice in user space to query stats is to issue a ETHTOOL_GSSET cmd to learn the buffer size needed, allocate the buffer, then call ETHTOOL_GSTIRNGS and ETHTOOL_GSTATS. If the number of real_num_queues is changed or flow control attributes are changed after ETHTOOL_GSSET but before the ETHTOOL_GSTRINGS/ETHTOOL_GSTATS a user space buffer overrun occurs. To fix the overrun always return the max buffer size needed from get_sset_count() then return all strings and stats from get_strings()/get_ethtool_stats(). This _will_ change the output from the ioctl() call which could break applications and script parsing in theory. I believe these changes should not break existing tools because the only changes will be more {tx|rx}_queues and the {tx|rx}_pb_* stats will always be returned. Existing scripts already need to handle changing number of queues because this occurs today depending on system and current features. The {tx|rx}_pb_* stats are at the end of the output and should be handled by scripts today regardless. Finally get_ethtool_stats and get_strings are free-form outputs tools parsing these outputs should be defensive anyways. In the end these updates are better then having a tool segfault because of a buffer overrun. Signed-off-by: NJohn Fastabend <john.r.fastabend@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 John Fastabend 提交于
Users expect the up2tc mapping to be maintained across a DCB enable/disable/enable transition. And since we maintain all the other DCB attributes we should do this for up2tc mappings as well just to be consistent. Also without this we break user space applications that expect this to occur that previously worked. Signed-off-by: NJohn Fastabend <john.r.fastabend@intel.com> Tested-by: NStephen Ko <stephen.s.ko@intel.com> Tested-by: NRoss Brattain <ross.b.brattain@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Yi Zou 提交于
If the netdev is already in NETREG_UNREGISTERING/_UNREGISTERED state, do not update the real num tx queues. netdev_queue_update_kobjects() is already called via remove_queue_kobjects() at NETREG_UNREGISTERING time. So, when upper layer driver, e.g., FCoE protocol stack is monitoring the netdev event of NETDEV_UNREGISTER and calls back to LLD ndo_fcoe_disable() to remove extra queues allocated for FCoE, the associated txq sysfs kobjects are already removed, and trying to update the real num queues would cause something like below: ... PID: 25138 TASK: ffff88021e64c440 CPU: 3 COMMAND: "kworker/3:3" #0 [ffff88021f007760] machine_kexec at ffffffff810226d9 #1 [ffff88021f0077d0] crash_kexec at ffffffff81089d2d #2 [ffff88021f0078a0] oops_end at ffffffff813bca78 #3 [ffff88021f0078d0] no_context at ffffffff81029e72 #4 [ffff88021f007920] __bad_area_nosemaphore at ffffffff8102a155 #5 [ffff88021f0079f0] bad_area_nosemaphore at ffffffff8102a23e #6 [ffff88021f007a00] do_page_fault at ffffffff813bf32e #7 [ffff88021f007b10] page_fault at ffffffff813bc045 [exception RIP: sysfs_find_dirent+17] RIP: ffffffff81178611 RSP: ffff88021f007bc0 RFLAGS: 00010246 RAX: ffff88021e64c440 RBX: ffffffff8156cc63 RCX: 0000000000000004 RDX: ffffffff8156cc63 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffff88021f007be0 R8: 0000000000000004 R9: 0000000000000008 R10: ffffffff816fed00 R11: 0000000000000004 R12: 0000000000000000 R13: ffffffff8156cc63 R14: 0000000000000000 R15: ffff8802222a0000 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #8 [ffff88021f007be8] sysfs_get_dirent at ffffffff81178c07 #9 [ffff88021f007c18] sysfs_remove_group at ffffffff8117ac27 #10 [ffff88021f007c48] netdev_queue_update_kobjects at ffffffff813178f9 #11 [ffff88021f007c88] netif_set_real_num_tx_queues at ffffffff81303e38 #12 [ffff88021f007cc8] ixgbe_set_num_queues at ffffffffa0249763 [ixgbe] #13 [ffff88021f007cf8] ixgbe_init_interrupt_scheme at ffffffffa024ea89 [ixgbe] #14 [ffff88021f007d48] ixgbe_fcoe_disable at ffffffffa0267113 [ixgbe] #15 [ffff88021f007d68] vlan_dev_fcoe_disable at ffffffffa014fef5 [8021q] #16 [ffff88021f007d78] fcoe_interface_cleanup at ffffffffa02b7dfd [fcoe] #17 [ffff88021f007df8] fcoe_destroy_work at ffffffffa02b7f08 [fcoe] #18 [ffff88021f007e18] process_one_work at ffffffff8105d7ca #19 [ffff88021f007e68] worker_thread at ffffffff81060513 #20 [ffff88021f007ee8] kthread at ffffffff810648b6 #21 [ffff88021f007f48] kernel_thread_helper at ffffffff813c40f4 Signed-off-by: NYi Zou <yi.zou@intel.com> Tested-by: NRoss Brattain <ross.b.brattain@intel.com> Tested-by: NStephen Ko <stephen.s.ko@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Alexander Duyck 提交于
This patch fixes an issue in which RSC will generate corrupted frames when PAGE_SIZE is larger than 8K. Specifically it looks like that in 2.6.39 a change was made so that GRO would always have at least 16 frags available for coalescing, but the ixgbe RSC logic was not updated. As such the RSC feature would generate a frame larger than 64K and then overflow the value in the IP length field. To correct that I am now basing things on the PAGE_SIZE. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Tested-by: NStephen Ko <stephen.s.ko@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Greg Rose 提交于
A check for the number of VFs allocated should have used a greater than equal operator instead of just greater than. This caused allocation of exactly 32 VFs to not enable the PF transmit and receive enables. Signed-off-by: NGreg Rose <gregory.v.rose@intel.com> Tested-by: NRobert E Garrett <robertX.e.garrett@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Greg Rose 提交于
Recent addition of code to find already allocated VFs failed to take account that systems with 2 or more multi-port SR-IOV capable controllers might have already enabled VFs. Make sure that the VFs the function is finding are actually subordinate to the particular instance of the adapter that is looking for them and not subordinate to some device that has previously enabled SR-IOV. This bug exists in 3.2 stable as well as 3.3 release candidates. CC: stable@vger.kernel.org Reported-by: NDavid Ahern <daahern@cisco.com> Signed-off-by: NGreg Rose <gregory.v.rose@intel.com> Tested-by: NRobert E Garrett <robertX.e.garrett@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-