Skip to content

R
rt-thread

lfmiao0 / rt-thread
与 Fork 源项目一致

Fork自 RT-Thread / rt-thread

通知 1
Star 0
Fork 0
R
rt-thread

体验新版 GitCode，发现更多精彩内容 >>

提交 7967365d 编写于 作者: G guozhanxin
浏览文件
操作

[bsp][stm32] add more driver supoort for l4

上级 dbd20046
隐藏空白更改
内联 并排
Showing with 253 addition and 51 deletion
bsp/stm32/libraries/HAL_Drivers/config/l4/dma_config.h
浏览文件 @ 7967365d
......@@ -36,6 +36,12 @@ extern "C" {
#define SPI1_TX_DMA_INSTANCE DMA1_Channel3
#define SPI1_TX_DMA_REQUEST DMA_REQUEST_1
#define SPI1_TX_DMA_IRQ DMA1_Channel3_IRQn
#elif defined(BSP_UART3_RX_USING_DMA) && !defined(UART3_RX_DMA_INSTANCE)
#define UART3_DMA_RX_IRQHandler DMA1_Channel3_IRQHandler
#define UART3_RX_DMA_RCC RCC_AHB1ENR_DMA1EN
#define UART3_RX_DMA_INSTANCE DMA1_Channel3
#define UART3_RX_DMA_REQUEST DMA_REQUEST_2
#define UART3_RX_DMA_IRQ DMA1_Channel3_IRQn
#endif
/* DMA1 channel4 */
......@@ -45,6 +51,12 @@ extern "C" {
#define UART1_TX_DMA_INSTANCE DMA1_Channel4
#define UART1_TX_DMA_REQUEST DMA_REQUEST_2
#define UART1_TX_DMA_IRQ DMA1_Channel4_IRQn
#elif defined(BSP_SPI2_RX_USING_DMA) && !defined(SPI2_RX_DMA_INSTANCE)
#define SPI2_DMA_RX_IRQHandler DMA1_Channel4_IRQHandler
#define SPI2_RX_DMA_RCC RCC_AHB1ENR_DMA1EN
#define SPI2_RX_DMA_INSTANCE DMA1_Channel4
#define SPI2_RX_DMA_REQUEST DMA_REQUEST_1
#define SPI2_RX_DMA_IRQ DMA1_Channel4_IRQn
#endif
/* DMA1 channel5 */
......@@ -60,9 +72,22 @@ extern "C" {
#define QSPI_DMA_INSTANCE DMA1_Channel5
#define QSPI_DMA_REQUEST DMA_REQUEST_5
#define QSPI_DMA_IRQ DMA1_Channel5_IRQn
#elif defined(BSP_SPI2_TX_USING_DMA) && !defined(SPI2_TX_DMA_INSTANCE)
#define SPI2_DMA_TX_IRQHandler DMA1_Channel5_IRQHandler
#define SPI2_TX_DMA_RCC RCC_AHB1ENR_DMA1EN
#define SPI2_TX_DMA_INSTANCE DMA1_Channel5
#define SPI2_TX_DMA_REQUEST DMA_REQUEST_1
#define SPI2_TX_DMA_IRQ DMA1_Channel5_IRQn
#endif
/* DMA1 channel6 */
#if defined(BSP_UART2_RX_USING_DMA) && !defined(UART2_RX_DMA_INSTANCE)
#define UART2_DMA_RX_IRQHandler DMA1_Channel6_IRQHandler
#define UART2_RX_DMA_RCC RCC_AHB1ENR_DMA1EN
#define UART2_RX_DMA_INSTANCE DMA1_Channel6
#define UART2_RX_DMA_REQUEST DMA_REQUEST_2
#define UART2_RX_DMA_IRQ DMA1_Channel6_IRQn
#endif
/* DMA1 channel7 */
......@@ -126,6 +151,12 @@ extern "C" {
#define QSPI_DMA_INSTANCE DMA2_Channel7
#define QSPI_DMA_REQUEST DMA_REQUEST_3
#define QSPI_DMA_IRQ DMA2_Channel7_IRQn
#elif defined(BSP_LPUART1_RX_USING_DMA) && !defined(LPUART1_RX_DMA_INSTANCE)
#define LPUART1_DMA_RX_IRQHandler DMA2_Channel7_IRQHandler
#define LPUART1_RX_DMA_RCC RCC_AHB1ENR_DMA2EN
#define LPUART1_RX_DMA_INSTANCE DMA2_Channel7
#define LPUART1_RX_DMA_REQUEST DMA_REQUEST_4
#define LPUART1_RX_DMA_IRQ DMA2_Channel7_IRQn
#endif
#ifdef __cplusplus
......
bsp/stm32/libraries/HAL_Drivers/config/l4/sdio_config.h 0 → 100644
浏览文件 @ 7967365d
/*
* Copyright (c) 2006-2018, RT-Thread Development Team
*
* SPDX-License-Identifier: Apache-2.0
*
* Change Logs:
* Date Author Notes
* 2018-12-13 BalanceTWK first version
*/
#ifndef __SDIO_CONFIG_H__
#define __SDIO_CONFIG_H__
#include <rtthread.h>
#include "stm32l4xx_hal.h"
#ifdef __cplusplus
extern "C" {
#endif
#ifdef BSP_USING_SDIO
#define SDIO_BUS_CONFIG \
{ \
.Instance = SDMMC1, \
.dma_rx.dma_rcc = RCC_AHB1ENR_DMA2EN, \
.dma_tx.dma_rcc = RCC_AHB1ENR_DMA2EN, \
.dma_rx.Instance = DMA2_Channel4, \
.dma_rx.request = DMA_REQUEST_7, \
.dma_rx.dma_irq = DMA2_Channel4_IRQn, \
.dma_tx.Instance = DMA2_Channel5, \
.dma_tx.request = DMA_REQUEST_7, \
.dma_tx.dma_irq = DMA2_Channel5_IRQn, \
}
#endif
#ifdef __cplusplus
}
#endif
#endif /*__SDIO_CONFIG_H__ */
bsp/stm32/libraries/HAL_Drivers/config/l4/spi_config.h
浏览文件 @ 7967365d
......@@ -52,21 +52,38 @@ extern "C" {
#endif /* BSP_SPI1_RX_USING_DMA */
#ifdef BSP_USING_SPI2
#ifndef SPI2_BUS_CONFIG
#define SPI2_BUS_CONFIG \
{ \
.Instance = SPI2, \
.bus_name = "spi2", \
.dma_rx.dma_rcc = RCC_AHB1ENR_DMA1EN, \
.dma_tx.dma_rcc = RCC_AHB1ENR_DMA1EN, \
.dma_rx.Instance = DMA1_Channel4, \
.dma_rx.request = DMA_REQUEST_1, \
.dma_rx.dma_irq = DMA1_Channel4_IRQn, \
.dma_tx.Instance = DMA1_Channel5, \
.dma_tx.request = DMA_REQUEST_1, \
.dma_tx.dma_irq = DMA1_Channel5_IRQn, \
}
#endif /* SPI2_BUS_CONFIG */
#endif /* BSP_USING_SPI2 */
#endif
#ifdef BSP_SPI2_TX_USING_DMA
#ifndef SPI2_TX_DMA_CONFIG
#define SPI2_TX_DMA_CONFIG \
{ \
.dma_rcc = SPI2_TX_DMA_RCC, \
.Instance = SPI2_TX_DMA_INSTANCE, \
.request = SPI2_TX_DMA_REQUEST, \
.dma_irq = SPI2_TX_DMA_IRQ, \
}
#endif /* SPI2_TX_DMA_CONFIG */
#endif /* BSP_SPI2_TX_USING_DMA */
#ifdef BSP_SPI2_RX_USING_DMA
#ifndef SPI2_RX_DMA_CONFIG
#define SPI2_RX_DMA_CONFIG \
{ \
.dma_rcc = SPI2_RX_DMA_RCC, \
.Instance = SPI2_RX_DMA_INSTANCE, \
.request = SPI2_RX_DMA_REQUEST, \
.dma_irq = SPI2_RX_DMA_IRQ, \
}
#endif /* SPI2_RX_DMA_CONFIG */
#endif /* BSP_SPI2_RX_USING_DMA */
#ifdef BSP_USING_SPI3
#define SPI3_BUS_CONFIG \
......
bsp/stm32/libraries/HAL_Drivers/config/l4/uart_config.h
浏览文件 @ 7967365d
......@@ -17,6 +17,28 @@
extern "C" {
#endif
#if defined(BSP_USING_LPUART1)
#ifndef LPUART1_CONFIG
#define LPUART1_CONFIG \
{ \
.name = "lpuart1", \
.Instance = LPUART1, \
.irq_type = LPUART1_IRQn, \
}
#endif /* LPUART1_CONFIG */
#if defined(BSP_LPUART1_RX_USING_DMA)
#ifndef LPUART1_DMA_CONFIG
#define LPUART1_DMA_CONFIG \
{ \
.Instance = LPUART1_RX_DMA_INSTANCE, \
.request = LPUART1_RX_DMA_REQUEST, \
.dma_rcc = LPUART1_RX_DMA_RCC, \
.dma_irq = LPUART1_RX_DMA_IRQ, \
}
#endif /* LPUART1_DMA_CONFIG */
#endif /* BSP_LPUART1_RX_USING_DMA */
#endif /* BSP_USING_LPUART1 */
#if defined(BSP_USING_UART1)
#ifndef UART1_CONFIG
#define UART1_CONFIG \
......@@ -63,6 +85,29 @@ extern "C" {
#endif /* UART2_DMA_CONFIG */
#endif /* BSP_UART2_RX_USING_DMA */
#if defined(BSP_USING_UART3)
#ifndef UART3_CONFIG
#define UART3_CONFIG \
{ \
.name = "uart3", \
.Instance = USART3, \
.irq_type = USART3_IRQn, \
}
#endif /* UART3_CONFIG */
#endif /* BSP_USING_UART3 */
#if defined(BSP_UART3_RX_USING_DMA)
#ifndef UART3_DMA_CONFIG
#define UART3_DMA_CONFIG \
{ \
.Instance = UART3_RX_DMA_INSTANCE, \
.request = UART3_RX_DMA_REQUEST, \
.dma_rcc = UART3_RX_DMA_RCC, \
.dma_irq = UART3_RX_DMA_IRQ, \
}
#endif /* UART3_DMA_CONFIG */
#endif /* BSP_UART3_RX_USING_DMA */
#ifdef __cplusplus
}
#endif
......
bsp/stm32/libraries/HAL_Drivers/drv_config.h
浏览文件 @ 7967365d
......@@ -60,6 +60,7 @@ extern "C" {
#include "l4/qspi_config.h"
#include "l4/adc_config.h"
#include "l4/tim_config.h"
#include "l4/sdio_config.h"
#include "l4/pwm_config.h"
#elif defined(SOC_SERIES_STM32G0)
#include "g0/dma_config.h"
......
bsp/stm32/libraries/HAL_Drivers/drv_sdio.c
浏览文件 @ 7967365d
......@@ -190,13 +190,13 @@ static void rthw_sdio_wait_completed(struct rthw_sdio *sdio)
cmd->cmd_code,
cmd->arg,
data ? (data->flags & DATA_DIR_WRITE ? 'w' : 'r') : '-',
data ? data->blks * data->blksize : 0,
data ? data->blksize : 0
);
data ? data->blks * data->blksize : 0,
data ? data->blksize : 0
);
}
}
else
{
{
cmd->err = RT_EOK;
LOG_D("sta:0x%08X [%08X %08X %08X %08X]", status, cmd->resp[0], cmd->resp[1], cmd->resp[2], cmd->resp[3]);
}
......@@ -278,9 +278,9 @@ static void rthw_sdio_send_command(struct rthw_sdio *sdio, struct sdio_pkg *pkg)
resp_type(cmd) == RESP_R6 ? "R6" : "",
resp_type(cmd) == RESP_R7 ? "R7" : "",
data ? (data->flags & DATA_DIR_WRITE ? 'w' : 'r') : '-',
data ? data->blks * data->blksize : 0,
data ? data->blksize : 0
);
data ? data->blks * data->blksize : 0,
data ? data->blksize : 0
);
/* config cmd reg */
reg_cmd = cmd->cmd_code | HW_SDIO_CPSM_ENABLE;
......@@ -293,7 +293,7 @@ static void rthw_sdio_send_command(struct rthw_sdio *sdio, struct sdio_pkg *pkg)
/* config data reg */
if (data != RT_NULL)
{
{
rt_uint32_t dir = 0;
rt_uint32_t size = data->blks * data->blksize;
int order;
......@@ -700,6 +700,25 @@ void SD_LowLevel_DMA_TxConfig(uint32_t *src, uint32_t *dst, uint32_t BufferSize)
HAL_DMA_DeInit(&sdio_obj.dma.handle_tx);
HAL_DMA_Init(&sdio_obj.dma.handle_tx);
HAL_DMA_Start(&sdio_obj.dma.handle_tx, (uint32_t)src, (uint32_t)dst, BufferSize);
#elif defined(SOC_SERIES_STM32L4)
static uint32_t size = 0;
size += BufferSize * 4;
sdio_obj.cfg = &sdio_config;
sdio_obj.dma.handle_tx.Instance = sdio_config.dma_tx.Instance;
sdio_obj.dma.handle_tx.Init.Request = sdio_config.dma_tx.request;
sdio_obj.dma.handle_tx.Init.Direction = DMA_MEMORY_TO_PERIPH;
sdio_obj.dma.handle_tx.Init.PeriphInc = DMA_PINC_DISABLE;
sdio_obj.dma.handle_tx.Init.MemInc = DMA_MINC_ENABLE;
sdio_obj.dma.handle_tx.Init.PeriphDataAlignment = DMA_PDATAALIGN_WORD;
sdio_obj.dma.handle_tx.Init.MemDataAlignment = DMA_MDATAALIGN_WORD;
sdio_obj.dma.handle_tx.Init.Mode = DMA_NORMAL;
sdio_obj.dma.handle_tx.Init.Priority = DMA_PRIORITY_MEDIUM;
HAL_DMA_DeInit(&sdio_obj.dma.handle_tx);
HAL_DMA_Init(&sdio_obj.dma.handle_tx);
HAL_DMA_Start(&sdio_obj.dma.handle_tx, (uint32_t)src, (uint32_t)dst, BufferSize);
#else
static uint32_t size = 0;
......@@ -736,38 +755,54 @@ void SD_LowLevel_DMA_RxConfig(uint32_t *src, uint32_t *dst, uint32_t BufferSize)
{
#if defined(SOC_SERIES_STM32F1)
sdio_obj.cfg = &sdio_config;
sdio_obj.dma.handle_tx.Instance = sdio_config.dma_tx.Instance;
sdio_obj.dma.handle_tx.Init.Direction = DMA_PERIPH_TO_MEMORY;
sdio_obj.dma.handle_tx.Init.MemDataAlignment = DMA_MDATAALIGN_WORD;
sdio_obj.dma.handle_tx.Init.MemInc = DMA_MINC_ENABLE;
sdio_obj.dma.handle_tx.Init.PeriphDataAlignment = DMA_PDATAALIGN_WORD;
sdio_obj.dma.handle_tx.Init.PeriphInc = DMA_PINC_DISABLE;
sdio_obj.dma.handle_tx.Init.Priority = DMA_PRIORITY_MEDIUM;
HAL_DMA_DeInit(&sdio_obj.dma.handle_tx);
HAL_DMA_Init(&sdio_obj.dma.handle_tx);
HAL_DMA_Start(&sdio_obj.dma.handle_tx, (uint32_t)src, (uint32_t)dst, BufferSize);
sdio_obj.dma.handle_rx.Instance = sdio_config.dma_tx.Instance;
sdio_obj.dma.handle_rx.Init.Direction = DMA_PERIPH_TO_MEMORY;
sdio_obj.dma.handle_rx.Init.MemDataAlignment = DMA_MDATAALIGN_WORD;
sdio_obj.dma.handle_rx.Init.MemInc = DMA_MINC_ENABLE;
sdio_obj.dma.handle_rx.Init.PeriphDataAlignment = DMA_PDATAALIGN_WORD;
sdio_obj.dma.handle_rx.Init.PeriphInc = DMA_PINC_DISABLE;
sdio_obj.dma.handle_rx.Init.Priority = DMA_PRIORITY_MEDIUM;
HAL_DMA_DeInit(&sdio_obj.dma.handle_rx);
HAL_DMA_Init(&sdio_obj.dma.handle_rx);
HAL_DMA_Start(&sdio_obj.dma.handle_rx, (uint32_t)src, (uint32_t)dst, BufferSize);
#elif defined(SOC_SERIES_STM32L4)
sdio_obj.cfg = &sdio_config;
sdio_obj.dma.handle_rx.Instance = sdio_config.dma_tx.Instance;
sdio_obj.dma.handle_rx.Init.Request = sdio_config.dma_tx.request;
sdio_obj.dma.handle_rx.Init.Direction = DMA_PERIPH_TO_MEMORY;
sdio_obj.dma.handle_rx.Init.PeriphInc = DMA_PINC_DISABLE;
sdio_obj.dma.handle_rx.Init.MemInc = DMA_MINC_ENABLE;
sdio_obj.dma.handle_rx.Init.PeriphDataAlignment = DMA_PDATAALIGN_WORD;
sdio_obj.dma.handle_rx.Init.MemDataAlignment = DMA_MDATAALIGN_WORD;
sdio_obj.dma.handle_rx.Init.Mode = DMA_NORMAL;
sdio_obj.dma.handle_rx.Init.Priority = DMA_PRIORITY_LOW;
HAL_DMA_DeInit(&sdio_obj.dma.handle_rx);
HAL_DMA_Init(&sdio_obj.dma.handle_rx);
HAL_DMA_Start(&sdio_obj.dma.handle_rx, (uint32_t)src, (uint32_t)dst, BufferSize);
#else
sdio_obj.cfg = &sdio_config;
sdio_obj.dma.handle_tx.Instance = sdio_config.dma_tx.Instance;
sdio_obj.dma.handle_tx.Init.Channel = sdio_config.dma_tx.channel;
sdio_obj.dma.handle_tx.Init.Direction = DMA_PERIPH_TO_MEMORY;
sdio_obj.dma.handle_tx.Init.PeriphInc = DMA_PINC_DISABLE;
sdio_obj.dma.handle_tx.Init.MemInc = DMA_MINC_ENABLE;
sdio_obj.dma.handle_tx.Init.PeriphDataAlignment = DMA_PDATAALIGN_WORD;
sdio_obj.dma.handle_tx.Init.MemDataAlignment = DMA_MDATAALIGN_WORD;
sdio_obj.dma.handle_tx.Init.Mode = DMA_PFCTRL;
sdio_obj.dma.handle_tx.Init.Priority = DMA_PRIORITY_MEDIUM;
sdio_obj.dma.handle_tx.Init.FIFOMode = DMA_FIFOMODE_ENABLE;
sdio_obj.dma.handle_tx.Init.FIFOThreshold = DMA_FIFO_THRESHOLD_FULL;
sdio_obj.dma.handle_tx.Init.MemBurst = DMA_MBURST_INC4;
sdio_obj.dma.handle_tx.Init.PeriphBurst = DMA_PBURST_INC4;
HAL_DMA_DeInit(&sdio_obj.dma.handle_tx);
HAL_DMA_Init(&sdio_obj.dma.handle_tx);
HAL_DMA_Start(&sdio_obj.dma.handle_tx, (uint32_t)src, (uint32_t)dst, BufferSize);
sdio_obj.dma.handle_rx.Instance = sdio_config.dma_tx.Instance;
sdio_obj.dma.handle_rx.Init.Channel = sdio_config.dma_tx.channel;
sdio_obj.dma.handle_rx.Init.Direction = DMA_PERIPH_TO_MEMORY;
sdio_obj.dma.handle_rx.Init.PeriphInc = DMA_PINC_DISABLE;
sdio_obj.dma.handle_rx.Init.MemInc = DMA_MINC_ENABLE;
sdio_obj.dma.handle_rx.Init.PeriphDataAlignment = DMA_PDATAALIGN_WORD;
sdio_obj.dma.handle_rx.Init.MemDataAlignment = DMA_MDATAALIGN_WORD;
sdio_obj.dma.handle_rx.Init.Mode = DMA_PFCTRL;
sdio_obj.dma.handle_rx.Init.Priority = DMA_PRIORITY_MEDIUM;
sdio_obj.dma.handle_rx.Init.FIFOMode = DMA_FIFOMODE_ENABLE;
sdio_obj.dma.handle_rx.Init.FIFOThreshold = DMA_FIFO_THRESHOLD_FULL;
sdio_obj.dma.handle_rx.Init.MemBurst = DMA_MBURST_INC4;
sdio_obj.dma.handle_rx.Init.PeriphBurst = DMA_PBURST_INC4;
HAL_DMA_DeInit(&sdio_obj.dma.handle_rx);
HAL_DMA_Init(&sdio_obj.dma.handle_rx);
HAL_DMA_Start(&sdio_obj.dma.handle_rx, (uint32_t)src, (uint32_t)dst, BufferSize);
#endif
}
......
bsp/stm32/libraries/HAL_Drivers/drv_soft_i2c.c
浏览文件 @ 7967365d
......@@ -18,7 +18,7 @@
#define LOG_TAG "drv.i2c"
#include <drv_log.h>
#if !defined(BSP_USING_I2C1) && !defined(BSP_USING_I2C2) && !defined(BSP_USING_I2C3)
#if !defined(BSP_USING_I2C1) && !defined(BSP_USING_I2C2) && !defined(BSP_USING_I2C3) && !defined(BSP_USING_I2C4)
#error "Please define at least one BSP_USING_I2Cx"
/* this driver can be disabled at menuconfig → RT-Thread Components → Device Drivers */
#endif
......@@ -34,6 +34,9 @@ static const struct stm32_soft_i2c_config soft_i2c_config[] =
#ifdef BSP_USING_I2C3
I2C3_BUS_CONFIG,
#endif
#ifdef BSP_USING_I2C4
I2C4_BUS_CONFIG,
#endif
};
static struct stm32_i2c i2c_obj[sizeof(soft_i2c_config) / sizeof(soft_i2c_config[0])];
......
bsp/stm32/libraries/HAL_Drivers/drv_soft_i2c.h
浏览文件 @ 7967365d
......@@ -55,7 +55,15 @@ struct stm32_i2c
.bus_name = "i2c3", \
}
#endif
#ifdef BSP_USING_I2C4
#define I2C4_BUS_CONFIG \
{ \
.scl = BSP_I2C4_SCL_PIN, \
.sda = BSP_I2C4_SDA_PIN, \
.bus_name = "i2c4", \
}
#endif
int rt_hw_i2c_init(void);
#endif
bsp/stm32/libraries/HAL_Drivers/drv_usart.c
浏览文件 @ 7967365d
......@@ -432,7 +432,7 @@ void UART5_DMA_RX_IRQHandler(void)
#endif /* BSP_USING_UART5*/
#if defined(BSP_USING_LPUART1)
void USART3_4_LPUART1_IRQHandler(void)
void LPUART1_IRQHandler(void)
{
/* enter interrupt */
rt_interrupt_enter();
......@@ -442,7 +442,19 @@ void USART3_4_LPUART1_IRQHandler(void)
/* leave interrupt */
rt_interrupt_leave();
}
#endif
#if defined(RT_SERIAL_USING_DMA) && defined(BSP_LPUART1_RX_USING_DMA)
void LPUART1_DMA_RX_IRQHandler(void)
{
/* enter interrupt */
rt_interrupt_enter();
HAL_DMA_IRQHandler(&uart_obj[LPUART1_INDEX].dma.handle);
/* leave interrupt */
rt_interrupt_leave();
}
#endif /* defined(RT_SERIAL_USING_DMA) && defined(BSP_LPUART1_RX_USING_DMA) */
#endif /* BSP_USING_LPUART1*/
#ifdef RT_SERIAL_USING_DMA
static void stm32_dma_config(struct rt_serial_device *serial)
......@@ -597,6 +609,11 @@ static void stm32_uart_get_dma_config(void)
static struct dma_config uart5_dma_rx = UART5_DMA_CONFIG;
uart_config[UART5_INDEX].dma_rx = &uart5_dma_rx;
#endif
#ifdef BSP_LPUART1_RX_USING_DMA
uart_obj[LPUART1_INDEX].uart_dma_flag = 1;
static struct dma_config lpuart1_dma_rx = LPUART1_DMA_CONFIG;
uart_config[LPUART1_INDEX].dma_rx = &lpuart1_dma_rx;
#endif
}
int rt_hw_usart_init(void)
......
bsp/stm32/libraries/STM32L4xx_HAL/SConscript
浏览文件 @ 7967365d
......@@ -73,6 +73,7 @@ if GetDepend(['RT_USING_WDT']):
if GetDepend(['RT_USING_SDIO']):
src += ['STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_sd.c']
src += ['STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_sd_ex.c']
src += ['STM32L4xx_HAL_Driver/Src/stm32l4xx_ll_sdmmc.c']
if GetDepend(['RT_USING_AUDIO']):
src += ['STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_sai.c']
......
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或