- 06 11月, 2012 2 次提交
-
-
由 heyongqiang 提交于
Summary: as subject Test Plan:n/a
-
由 heyongqiang 提交于
Summary: as subject. Test Plan: manually test it, will add a testcase Reviewers: dhruba, MarkCallaghan Differential Revision: https://reviews.facebook.net/D6345
-
- 05 11月, 2012 1 次提交
-
-
由 Dhruba Borthakur 提交于
commit 854c66b0. Summary: Compilation problem introduced by previous commit 854c66b0. Test Plan: make check
-
- 03 11月, 2012 1 次提交
-
-
由 amayank 提交于
Make compression options configurable. These include window-bits, level and strategy for ZlibCompression Summary: Leveldb currently uses windowBits=-14 while using zlib compression.(It was earlier 15). This makes the setting configurable. Related changes here: https://reviews.facebook.net/D6105 Test Plan: make all check Reviewers: dhruba, MarkCallaghan, sheki, heyongqiang Differential Revision: https://reviews.facebook.net/D6393
-
- 02 11月, 2012 1 次提交
-
-
由 heyongqiang 提交于
Summary: as subject Test Plan: run db_bench and db_test Reviewers: dhruba Reviewed By: dhruba Differential Revision: https://reviews.facebook.net/D6111
-
- 30 10月, 2012 7 次提交
-
-
由 Mark Callaghan 提交于
Summary: This makes the stall timers in MakeRoomForWrite more accurate by timing the sleeps. From looking at the logs the real sleep times are usually about 2000 usecs each when SleepForMicros(1000) is called. The modified LOG messages are: 2012/10/29-12:06:33.271984 2b3cc872f700 delaying write 13 usecs for level0_slowdown_writes_trigger 2012/10/29-12:06:34.688939 2b3cc872f700 delaying write 1728 usecs for rate limits with max score 3.83 Task ID: # Blame Rev: Test Plan: run db_bench, look at DB/LOG Revert Plan: Database Impact: Memcache Impact: Other Notes: EImportant: - begin *PUBLIC* platform impact section - Bugzilla: # - end platform impact - Reviewers: dhruba Reviewed By: dhruba Differential Revision: https://reviews.facebook.net/D6297
-
由 heyongqiang 提交于
Summary: as subject Test Plan: db_test Reviewers: dhruba, MarkCallaghan Reviewed By: MarkCallaghan Differential Revision: https://reviews.facebook.net/D6309
-
由 heyongqiang 提交于
Summary: as subject Test Plan: db_test Reviewers: dhruba, MarkCallaghan Reviewed By: MarkCallaghan Differential Revision: https://reviews.facebook.net/D6303
-
由 Dhruba Borthakur 提交于
Summary: The leveldb API is enhanced to support different compression algorithms at different levels. This adds the option min_level_to_compress to db_bench that specifies the minimum level for which compression should be done when compression is enabled. This can be used to disable compression for levels 0 and 1 which are likely to suffer from stalls because of the CPU load for memtable flushes and (L0,L1) compaction. Level 0 is special as it gets frequent memtable flushes. Level 1 is special as it frequently gets all:all file compactions between it and level 0. But all other levels could be the same. For any level N where N > 1, the rate of sequential IO for that level should be the same. The last level is the exception because it might not be full and because files from it are not read to compact with the next larger level. The same amount of time will be spent doing compaction at any level N excluding N=0, 1 or the last level. By this standard all of those levels should use the same compression. The difference is that the loss (using more disk space) from a faster compression algorithm is less significant for N=2 than for N=3. So we might be willing to trade disk space for faster write rates with no compression for L0 and L1, snappy for L2, zlib for L3. Using a faster compression algorithm for the mid levels also allows us to reclaim some cpu without trading off much loss in disk space overhead. Also note that little is to be gained by compressing levels 0 and 1. For a 4-level tree they account for 10% of the data. For a 5-level tree they account for 1% of the data. With compression enabled: * memtable flush rate is ~18MB/second * (L0,L1) compaction rate is ~30MB/second With compression enabled but min_level_to_compress=2 * memtable flush rate is ~320MB/second * (L0,L1) compaction rate is ~560MB/second This practicaly takes the same code from https://reviews.facebook.net/D6225 but makes the leveldb api more general purpose with a few additional lines of code. Test Plan: make check Differential Revision: https://reviews.facebook.net/D6261
-
由 Mark Callaghan 提交于
Summary: Adds the "MB/sec in" and "MB/sec out" to this line: Amplification: 1.7 rate, 0.01 GB in, 0.02 GB out, 8.24 MB/sec in, 13.75 MB/sec out Changes all values to be reported per interval and since test start for this line: ... thread 0: (10000,60000) ops and (19155.6,27307.5) ops/second in (0.522041,2.197198) seconds Task ID: # Blame Rev: Test Plan: run db_bench Revert Plan: Database Impact: Memcache Impact: Other Notes: EImportant: - begin *PUBLIC* platform impact section - Bugzilla: # - end platform impact - Reviewers: dhruba Reviewed By: dhruba Differential Revision: https://reviews.facebook.net/D6291
-
由 Dhruba Borthakur 提交于
Summary: A previous commit 4c107587 introduced the idea that some version updates might not delete obsolete files. This means that if a unit test blindly counts the number of files in the db directory it might not represent the true state of the database. Use GetLiveFiles() insteads to count the number of live files in the database. Test Plan: make check
-
由 Mark Callaghan 提交于
Summary: Adds a method that returns the score for the next level that most needs compaction. That method is then used by db_bench to rate limit threads. Threads are put to sleep at the end of each stats interval until the score is less than the limit. The limit is set via the --rate_limit=$double option. The specified value must be > 1.0. Also adds the option --stats_per_interval to enable additional metrics reported every stats interval. Task ID: # Blame Rev: Test Plan: run db_bench Revert Plan: Database Impact: Memcache Impact: Other Notes: EImportant: - begin *PUBLIC* platform impact section - Bugzilla: # - end platform impact - Reviewers: dhruba Reviewed By: dhruba Differential Revision: https://reviews.facebook.net/D6243
-
- 27 10月, 2012 4 次提交
-
-
由 Kai Liu 提交于
Summary: Test Plan: Reviewers: CC: Task ID: 1803577 Blame Rev:
-
由 Kai Liu 提交于
Summary: Enable LevelDb to create a new log file if current log file is too large. Test Plan: Write a script and manually check the generated info LOG. Task ID: 1803577 Blame Rev: Reviewers: dhruba, heyongqiang Reviewed By: heyongqiang CC: zshao Differential Revision: https://reviews.facebook.net/D6003
-
由 Mark Callaghan 提交于
Summary: AFAIK proper /bin/sh does not support "+=". Note that only our changes use "+=". The Google code does A="$A + $B" rather than A+=$B. Task ID: # Blame Rev: Test Plan: build Revert Plan: Database Impact: Memcache Impact: Other Notes: EImportant: - begin *PUBLIC* platform impact section - Bugzilla: # - end platform impact - Reviewers: dhruba Reviewed By: dhruba Differential Revision: https://reviews.facebook.net/D6231
-
由 Mark Callaghan 提交于
Summary: I used server uptime to compute per-level IO throughput rates. I intended to use time spent doing compaction at that level. This fixes that. Task ID: # Blame Rev: Test Plan: run db_bench, look at results Revert Plan: Database Impact: Memcache Impact: Other Notes: EImportant: - begin *PUBLIC* platform impact section - Bugzilla: # - end platform impact - Reviewers: dhruba Reviewed By: dhruba Differential Revision: https://reviews.facebook.net/D6237
-
- 25 10月, 2012 1 次提交
-
-
由 Mark Callaghan 提交于
Summary: This adds more statistics to be reported by GetProperty("leveldb.stats"). The new stats include time spent waiting on stalls in MakeRoomForWrite. This also includes the total amplification rate where that is: (#bytes of sequential IO during compaction) / (#bytes from Put) This also includes a lot more data for the per-level compaction report. * Rn(MB) - MB read from level N during compaction between levels N and N+1 * Rnp1(MB) - MB read from level N+1 during compaction between levels N and N+1 * Wnew(MB) - new data written to the level during compaction * Amplify - ( Write(MB) + Rnp1(MB) ) / Rn(MB) * Rn - files read from level N during compaction between levels N and N+1 * Rnp1 - files read from level N+1 during compaction between levels N and N+1 * Wnp1 - files written to level N+1 during compaction between levels N and N+1 * NewW - new files written to level N+1 during compaction * Count - number of compactions done for this level This is the new output from DB::GetProperty("leveldb.stats"). The old output stopped at Write(MB) Compactions Level Files Size(MB) Time(sec) Read(MB) Write(MB) Rn(MB) Rnp1(MB) Wnew(MB) Amplify Read(MB/s) Write(MB/s) Rn Rnp1 Wnp1 NewW Count ------------------------------------------------------------------------------------------------------------------------------------- 0 3 6 33 0 576 0 0 576 -1.0 0.0 1.3 0 0 0 0 290 1 127 242 351 5316 5314 570 4747 567 17.0 12.1 12.1 287 2399 2685 286 32 2 161 328 54 822 824 326 496 328 4.0 1.9 1.9 160 251 411 160 161 Amplification: 22.3 rate, 0.56 GB in, 12.55 GB out Uptime(secs): 439.8 Stalls(secs): 206.938 level0_slowdown, 0.000 level0_numfiles, 24.129 memtable_compaction Task ID: # Blame Rev: Test Plan: run db_bench Revert Plan: Database Impact: Memcache Impact: Other Notes: EImportant: - begin *PUBLIC* platform impact section - Bugzilla: # - end platform impact - (cherry picked from commit ecdeead38f86cc02e754d0032600742c4f02fec8) Reviewers: dhruba Differential Revision: https://reviews.facebook.net/D6153
-
- 24 10月, 2012 1 次提交
-
-
由 Mark Callaghan 提交于
Summary: I still get failures from this. Not sure whether there was a fix in progress. Task ID: # Blame Rev: Test Plan: compile Revert Plan: Database Impact: Memcache Impact: Other Notes: EImportant: - begin *PUBLIC* platform impact section - Bugzilla: # - end platform impact - Reviewers: dhruba Reviewed By: dhruba Differential Revision: https://reviews.facebook.net/D6147
-
- 23 10月, 2012 2 次提交
-
-
由 Dhruba Borthakur 提交于
Summary: The compaction process deletes a large number of files. This takes quite a bit of time and is best done outside the mutex lock. Test Plan: make check Differential Revision: https://reviews.facebook.net/D6123
-
由 heyongqiang 提交于
Summary: as subject Test Plan: compile Reviewers: dhruba Reviewed By: dhruba CC: MarkCallaghan Differential Revision: https://reviews.facebook.net/D6117
-
- 20 10月, 2012 2 次提交
-
-
由 Dhruba Borthakur 提交于
Summary: Leveldb code already calculates checksums for each block. There is no need to generate checksums inside zlib. This patch switches-off checksum generation/checking in zlib library. (The Inno support for zlib uses windowsBits=14 as well.) pfabricator marks this file as binary. But here is the diff diff --git a/port/port_posix.h b/port/port_posix.h index 86a0927..db4e0b8 100644 --- a/port/port_posix.h +++ b/port/port_posix.h @@ -163,7 +163,7 @@ inline bool Snappy_Uncompress(const char* input, size_t length, } inline bool Zlib_Compress(const char* input, size_t length, - ::std::string* output, int windowBits = 15, int level = -1, + ::std::string* output, int windowBits = -14, int level = -1, int strategy = 0) { #ifdef ZLIB // The memLevel parameter specifies how much memory should be allocated for @@ -223,7 +223,7 @@ inline bool Zlib_Compress(const char* input, size_t length, } inline char* Zlib_Uncompress(const char* input_data, size_t input_length, - int* decompress_size, int windowBits = 15) { + int* decompress_size, int windowBits = -14) { #ifdef ZLIB z_stream _stream; memset(&_stream, 0, sizeof(z_stream)); Test Plan: run db_bench with zlib compression. Reviewers: heyongqiang, MarkCallaghan Reviewed By: heyongqiang Differential Revision: https://reviews.facebook.net/D6105
-
由 Dhruba Borthakur 提交于
Summary: The parameter delete_obsolete_files_period_micros controls the periodicity of deleting obsolete files. db_bench was reading in this parameter intoa local variable called 'l' but was incorrectly using another local variable called 'n' while setting it in the db.options data structure. This patch also logs the value of delete_obsolete_files_period_micros in the LOG file at db startup time. I am hoping that this will improve the overall write throughput drastically. Test Plan: run db_bench Reviewers: MarkCallaghan, heyongqiang Reviewed By: MarkCallaghan Differential Revision: https://reviews.facebook.net/D6099
-
- 18 10月, 2012 1 次提交
-
-
由 Dhruba Borthakur 提交于
Summary: fbcode build now support SSE instructions. Delete older version of the compile-helper fbcode.sh. This is subsumed by fbcode.gcc471.sh. Test Plan: run make check Reviewers: heyongqiang, MarkCallaghan Reviewed By: heyongqiang Differential Revision: https://reviews.facebook.net/D6057
-
- 17 10月, 2012 1 次提交
-
-
由 Dhruba Borthakur 提交于
Summary: The method DeleteObsolete files is a very costly methind, especially when the number of files in a system is large. It makes a list of all live-files and then scans the directory to compute the diff. By default, this method is executed after every compaction run. This patch makes it such that DeleteObsolete files is never invoked twice within a configured period. Test Plan: run all unit tests Reviewers: heyongqiang, MarkCallaghan Reviewed By: MarkCallaghan Differential Revision: https://reviews.facebook.net/D6045
-
- 16 10月, 2012 1 次提交
-
-
由 Dhruba Borthakur 提交于
Summary: Enhance db_bench to allow setting the number of levels in a database. Test Plan: run db_bench and look at LOG Reviewers: heyongqiang, MarkCallaghan Reviewed By: MarkCallaghan CC: MarkCallaghan Differential Revision: https://reviews.facebook.net/D6027
-
- 13 10月, 2012 1 次提交
-
-
由 Dhruba Borthakur 提交于
Summary: Test Plan: Reviewers: CC: Task ID: # Blame Rev:
-
- 11 10月, 2012 1 次提交
-
-
由 Asad K Awan 提交于
Summary: Created a tool that runs multiple threads that concurrently read and write to levelDB. All writes to the DB are stored in an in-memory hashtable and verified at the end of the test. All writes for a given key are serialzied. Test Plan: - Verified by writing only a few keys and logging all writes and verifying that values read and written are correct. - Verified correctness of value generator. - Ran with various parameters of number of keys, locks, and threads. Reviewers: dhruba, MarkCallaghan, heyongqiang Reviewed By: dhruba Differential Revision: https://reviews.facebook.net/D5829
-
- 06 10月, 2012 2 次提交
-
-
由 Thawan Kooburat 提交于
Summary: This implement the Java interface by using JNI Test Plan: compile test Reviewers: dhruba Reviewed By: dhruba Differential Revision: https://reviews.facebook.net/D5925
-
由 Thawan Kooburat 提交于
Summary: See the wiki below https://our.intern.facebook.com/intern/wiki/index.php/Database/leveldb/Java Test Plan: compile test Reviewers: dhruba Reviewed By: dhruba Differential Revision: https://reviews.facebook.net/D5919
-
- 04 10月, 2012 4 次提交
-
-
由 Dhruba Borthakur 提交于
Summary: Each assoc is identified by (id1, assocType). This is the rowkey. Each row has a read/write rowlock. There is statically allocated array of 2000 read/write locks. A rowkey is murmur-hashed to one of the read/write locks. assocPut and assocDelete acquires the rowlock in Write mode. The key-updates are done within the rowlock with a atomic nosync batch write to leveldb. Then the rowlock is released and a write-with-sync is done to sync leveldb transaction log. Test Plan: added unit test Reviewers: heyongqiang Reviewed By: heyongqiang Differential Revision: https://reviews.facebook.net/D5859
-
由 Dhruba Borthakur 提交于
Summary: We have seen that reading data via the pread call (instead of mmap) is much faster on Linux 2.6.x kernels. This patch makes an equivalent option to switch off mmaps for the write path as well. db_bench --mmap_write=0 will use write() instead of mmap() to write data to a file. This change is backward compatible, the default option is to continue using mmap for writing to a file. Test Plan: "make check all" Differential Revision: https://reviews.facebook.net/D5781
-
由 Mark Callaghan 提交于
Summary: The option is zero by default and in that case reporting is unchanged. By unchanged, the interval at which stats are reported is scaled after each report and newline is not issued after each report so one line is rewritten. When non-zero it specifies the constant interval (in operations) at which statistics are reported and the stats include the rate per interval. This makes it easier to determine whether QPS changes over the duration of the test. Task ID: # Blame Rev: Test Plan: run db_bench Revert Plan: Database Impact: Memcache Impact: Other Notes: EImportant: - begin *PUBLIC* platform impact section - Bugzilla: # - end platform impact - Reviewers: dhruba Reviewed By: dhruba CC: heyongqiang Differential Revision: https://reviews.facebook.net/D5817
-
由 Mark Callaghan 提交于
Summary: see above Task ID: # Blame Rev: Test Plan: run db_bench with invalid value for option Revert Plan: Database Impact: Memcache Impact: Other Notes: EImportant: - begin *PUBLIC* platform impact section - Bugzilla: # - end platform impact - Reviewers: dhruba Reviewed By: dhruba CC: heyongqiang Differential Revision: https://reviews.facebook.net/D5823
-
- 03 10月, 2012 1 次提交
-
-
由 Mark Callaghan 提交于
Summary: stdlib.h is needed for exit() --readhead --> --readahead Task ID: # Blame Rev: Test Plan: compile Revert Plan: Database Impact: Memcache Impact: Other Notes: EImportant: - begin *PUBLIC* platform impact section - Bugzilla: # - end platform impact - fix compiler warnings & errors Reviewers: dhruba Reviewed By: dhruba CC: heyongqiang Differential Revision: https://reviews.facebook.net/D5805
-
- 02 10月, 2012 3 次提交
-
-
由 Dhruba Borthakur 提交于
Summary: Implement ReadWrite locks for leveldb. These will be helpful to implement a read-modify-write operation (e.g. atomic increments). Test Plan: does not modify any existing code Reviewers: heyongqiang Reviewed By: heyongqiang CC: MarkCallaghan Differential Revision: https://reviews.facebook.net/D5787
-
由 Abhishek Kona 提交于
Summary: A simple CLI which calles DB->CompactRange() Can take String key's as range. Test Plan: Inserted data into a table. Waited for a minute, used compact tool on it. File modification time's changed so Compact did something on the files. Existing unit tests work. Reviewers: heyongqiang, dhruba Reviewed By: dhruba Differential Revision: https://reviews.facebook.net/D5697
-
由 Dhruba Borthakur 提交于
Summary: Implement assocDelete. Test Plan: unit test attached Reviewers: heyongqiang Reviewed By: heyongqiang CC: MarkCallaghan Differential Revision: https://reviews.facebook.net/D5721
-
- 30 9月, 2012 1 次提交
-
-
由 Dhruba Borthakur 提交于
Summary: Print the block cache size in the LOG. Test Plan: run db_bench and look at LOG. This is helpful while I was debugging one use-case. Reviewers: heyongqiang, MarkCallaghan Reviewed By: heyongqiang Differential Revision: https://reviews.facebook.net/D5739
-
- 29 9月, 2012 1 次提交
-
-
由 Dhruba Borthakur 提交于
Summary: In the current code, a Get() call can trigger compaction if it has to look at more than one file. This causes unnecessary compaction because looking at more than one file is a penalty only if the file is not yet in the cache. Also, th current code counts these files before the bloom filter check is applied. This patch counts a 'seek' only if the file fails the bloom filter check and has to read in data block(s) from the storage. This patch also counts a 'seek' if a file is not present in the file-cache, because opening a file means that its index blocks need to be read into cache. Test Plan: unit test attached. I will probably add one more unti tests. Reviewers: heyongqiang Reviewed By: heyongqiang CC: MarkCallaghan Differential Revision: https://reviews.facebook.net/D5709
-
- 28 9月, 2012 1 次提交
-
-
由 gjain 提交于
Summary: Create a tool to iterate through keys and dump values. Current options as follows: db_dump --start=[START_KEY] --end=[END_KEY] --max_keys=[NUM] --stats [PATH] START_KEY: First key to start at END_KEY: Key to end at (not inclusive) NUM: Maximum number of keys to dump PATH: Path to leveldb DB The --stats command line argument prints out the DB stats before dumping the keys. Test Plan: - Tested with invalid args - Tested with invalid path - Used empty DB - Used filled DB - Tried various permutations of command line options Reviewers: dhruba, heyongqiang Reviewed By: dhruba Differential Revision: https://reviews.facebook.net/D5643
-