- 28 3月, 2021 12 次提交
-
-
由 Dylan DPC 提交于
combine: stop eagerly evaluating consts `super_relate_consts` eagerly evaluates constants which doesn't seem too great. I now also finally understand why all of the unused substs test passed. The reason being that we just evaluated the constants in `super_relate_consts`
😆 While this change isn't strictly necessary as evaluating consts here doesn't hurt, it still feels a lot cleaner to do it this way r? `@oli-obk` `@nikomatsakis` -
由 bors 提交于
Rollup of 10 pull requests Successful merges: - #79399 (Use detailed and shorter fs error explaination) - #83348 (format macro argument parsing fix) - #83462 (ExitStatus: print "exit status: {}" rather than "exit code: {}" on unix) - #83526 (lazily calls some fns) - #83558 (Use DebugStruct::finish_non_exhaustive() in std.) - #83559 (Fix Debug implementation for RwLock{Read,Write}Guard.) - #83560 (Derive Debug for io::Chain instead of manually implementing it.) - #83561 (Improve Debug implementations of Mutex and RwLock.) - #83567 (Update rustup cross-compilation docs link) - #83569 (Add regression tests for #56445) Failed merges: r? `@ghost` `@rustbot` modify labels: rollup
-
由 Yuki Okushi 提交于
Add regression tests for #56445 Closes #56445.
-
由 Yuki Okushi 提交于
Update rustup cross-compilation docs link
-
由 Yuki Okushi 提交于
Improve Debug implementations of Mutex and RwLock. This improves the Debug implementations of Mutex and RwLock. They now show the poison flag and use debug_non_exhaustive. (See #67364.)
-
由 Yuki Okushi 提交于
Derive Debug for io::Chain instead of manually implementing it. This derives Debug for io::Chain instead of manually implementing it. The manual implementation has the same bounds, so I don't think there's any reason for a manual implementation. The names used in the derive implementation are even nicer (`first`/`second`) than the manual implementation (`t`/`u`), and include the `done_first` field too.
-
由 Yuki Okushi 提交于
Fix Debug implementation for RwLock{Read,Write}Guard. This would attempt to print the Debug representation of the lock that the guard has locked, which will try to lock again, fail, and just print `"<locked>"` unhelpfully. After this change, this just prints the contents of the mutex, like the other smart pointers (and MutexGuard) do. MutexGuard had this problem too: https://github.com/rust-lang/rust/issues/57702
-
由 Yuki Okushi 提交于
Use DebugStruct::finish_non_exhaustive() in std. See https://github.com/rust-lang/rust/issues/67364
-
由 Yuki Okushi 提交于
lazily calls some fns Replaced some fn's with it's lazy variants.
-
由 Yuki Okushi 提交于
ExitStatus: print "exit status: {}" rather than "exit code: {}" on unix Proper Unix terminology is "exit status" (vs "wait status"). "exit code" is imprecise on Unix and therefore unclear. (As far as I can tell, "exit code" is correct terminology on Windows.) This new wording is unfortunately inconsistent with the identifier names in the Rust stdlib. It is the identifier names that are wrong, as discussed at length in eg https://doc.rust-lang.org/nightly/std/process/struct.ExitStatus.html https://doc.rust-lang.org/nightly/std/os/unix/process/trait.ExitStatusExt.html Unfortunately for API stability reasons it would be a lot of work, and a lot of disruption, to change the names in the stdlib (eg to rename `std::process::ExitStatus` to `std::process::ChildStatus` or something), but we should fix the message output. Many (probably most) readers of these messages about exit statuses will be users and system administrators, not programmers, who won't even know that Rust has this wrong terminology. So I think the right thing is to fix the documentation (as I have already done) and, now, the terminology in the implementation. This is a user-visible change to the behaviour of all Rust programs which run Unix subprocesses. Hopefully no-one is matching against the exit status string, except perhaps in tests.
-
由 Yuki Okushi 提交于
format macro argument parsing fix When the character next to `{}` is "shifted" (when mapping a byte index in the format string to span) we should avoid shifting the span end index, so first map the index of `}` to span, then bump the span, instead of first mapping the next byte index to a span (which causes bumping the end span too much). Regression test added. Fixes #83344 --- r? ```@estebank```
-
由 Yuki Okushi 提交于
Use detailed and shorter fs error explaination Includes suggestion from `@the8472` https://github.com/rust-lang/rust/issues/79390#issuecomment-733263336
-
- 27 3月, 2021 28 次提交
-
-
由 lcnr 提交于
-
由 Bastian Kauschke 提交于
-
由 Simon Jakobi 提交于
Closes #56445.
-
由 Jon Jensen 提交于
-
由 bors 提交于
Generalize and inline slice::fill specializations This makes the memset specialization applicable to more types. And since the code now lives in a generic method it is also eligible for cross-crate inlining which should fix #83235
-
由 Ivan Tham 提交于
Includes suggestion from the8472 https://github.com/rust-lang/rust/issues/79390#issuecomment-733263336 More detail error explanation in fs doc
-
由 Mara Bos 提交于
They now show the poison flag and use debug_non_exhaustive.
-
由 Mara Bos 提交于
The manual implementation has the same bounds, so I don't think there's any reason for a manual implementation. The names used in the derive implementation are even nicer (`first`/`second`) than the manual implementation (`t`/`u`), and include the `done_first` field too.
-
由 Mara Bos 提交于
This would attempt to print the Debug representation of the lock that the guard has locked, which will try to lock again, fail, and just print "<locked>" unhelpfully. After this change, this just prints the contents of the mutex, like the other smart pointers (and MutexGuard) do.
-
由 Mara Bos 提交于
-
由 bors 提交于
Add IEEE 754 compliant fmt/parse of -0, infinity, NaN This pull request improves the Rust float formatting/parsing libraries to comply with IEEE 754's formatting expectations around certain special values, namely signed zero, the infinities, and NaN. It also adds IEEE 754 compliance tests that, while less stringent in certain places than many of the existing flt2dec/dec2flt capability tests, are intended to serve as the beginning of a roadmap to future compliance with the standard. Some relevant documentation is also adjusted with clarifying remarks. This PR follows from discussion in https://github.com/rust-lang/rfcs/issues/1074, and closes #24623. The most controversial change here is likely to be that -0 is now printed as -0. Allow me to explain: While there appears to be community support for an opt-in toggle of printing floats as if they exist in the naively expected domain of numbers, i.e. not the extended reals (where floats live), IEEE 754-2019 is clear that a float converted to a string should be capable of being transformed into the original floating point bit-pattern when it satisfies certain conditions (namely, when it is an actual numeric value i.e. not a NaN and the original and destination float width are the same). -0 is given special attention here as a value that should have its sign preserved. In addition, the vast majority of other programming languages not only output `-0` but output `-0.0` here. While IEEE 754 offers a broad leeway in how to handle producing what it calls a "decimal character sequence", it is clear that the operations a language provides should be capable of round tripping, and it is confusing to advertise the f32 and f64 types as binary32 and binary64 yet have the most basic way of producing a string and then reading it back into a floating point number be non-conformant with the standard. Further, existing documentation suggested that e.g. -0 would be printed with -0 regardless of the presence of the `+` fmt character, but it prints "+0" instead if given such (which was what led to the opening of #24623). There are other parsing and formatting issues for floating point numbers which prevent Rust from complying with the standard, as well as other well-documented challenges on the arithmetic level, but I hope that this can be the beginning of motion towards solving those challenges.
-
由 Ömer Sinan Ağacan 提交于
When the character next to `{}` is "shifted" (when mapping a byte index in the format string to span) we should avoid shifting the span end index, so first map the index of `}` to span, then bump the span, instead of first mapping the next byte index to a span (which causes bumping the end span too much). Regression test added. Fixes #83344
-
由 bors 提交于
Rollup of 9 pull requests Successful merges: - #83239 (Remove/replace some outdated crates from the dependency tree) - #83328 (Fixes to inline assmebly tests) - #83343 (Simplify and fix byte skipping in format! string parser) - #83388 (Make # pretty print format easier to discover) - #83431 (Tell GitHub to highlight `config.toml.example` as TOML) - #83508 (Use the direct link to the platform support page) - #83511 (compiletest: handle llvm_version with suffix like "12.0.0libcxx") - #83524 (Document that the SocketAddr memory representation is not stable) - #83525 (fix doc comment for `ty::Dynamic`) Failed merges: r? `@ghost` `@rustbot` modify labels: rollup
-
由 klensy 提交于
-
由 Yuki Okushi 提交于
fix doc comment for `ty::Dynamic`
-
由 Yuki Okushi 提交于
Document that the SocketAddr memory representation is not stable Intended to help out with #78802. Work has been put into finding and fixing code that assumes the memory layout of `SocketAddrV4` and `SocketAddrV6`. But it turns out there are cases where new code continues to make the same assumption ([example](https://github.com/spacejam/seaslug/commit/96927dc2b7b918860a79c4eb6336051e52c6137a#diff-917db3d8ca6f862ebf42726b23c72a12b35e584e497ebdb24e474348d7c6ffb6R610-R621)). The memory layout of a type in `std` is never part of the public API. Unless explicitly stated I guess. But since that is invalidly relied upon by a considerable amount of code for these particular types, it might make sense to explicitly document this. This can be temporary. Once #78802 lands it does not make sense to rely on the layout any longer, and this documentation can also be removed.
-
由 Yuki Okushi 提交于
compiletest: handle llvm_version with suffix like "12.0.0libcxx" The previous code only remove the suffix begin with `-`, but Gentoo Linux [define `LLVM_VERSION_SUFFIX="libcxx"`](https://github.com/gentoo/gentoo/blob/604d79f327176eecb05293d7154e24231229cb31/sys-devel/llvm/llvm-11.1.0.ebuild#L378) when llvm is linked to libc++ and lead to a panic: ``` thread 'main' panicked at 'Malformed version component: ParseIntError { kind: InvalidDigit }', src/tools/compiletest/src/header.rs:968:28 ``` This new code will handle all suffix not beginning with digit or dot.
-
由 Yuki Okushi 提交于
Use the direct link to the platform support page
-
由 Yuki Okushi 提交于
Tell GitHub to highlight `config.toml.example` as TOML This should be a nice small quality of life improvement when looking at `config.toml.example` on GitHub or looking at diffs of it in PRs.
-
由 Yuki Okushi 提交于
Make # pretty print format easier to discover # Rationale: I use (cargo cult?) three formats in rust: `{}`, debug `{:?}`, and pretty-print debug `{:#?}`. I discovered `{:#?}` in some blog post or guide when I started working in Rust. While `#` is documented I think it is hard to discover. So taking the good advice of ```@carols10cents``` I am trying to improve the docs with a PR As a reminder "pretty print" means that where `{:?}` will print something like ``` foo: { b1: 1, b2: 2} ``` `{:#?}` will prints something like ``` foo { b1: 1 b2: 3 } ``` # Changes Add an example to `fmt` to try and make it easier to discover `#`
-
由 Yuki Okushi 提交于
Simplify and fix byte skipping in format! string parser Fixes '\\' handling in format strings. Fixes #83340
-
由 Yuki Okushi 提交于
Fixes to inline assmebly tests * Join test thread to make assertion effective in sym.rs test case * Use a single codegen unit to reduce non-determinism in srcloc.rs test #82886
-
由 Yuki Okushi 提交于
Remove/replace some outdated crates from the dependency tree - Remove `cloudabi` by updating `parking_lot` to 0.11.1. - Replace `packed_simd` with `packed_simd2` by updating `bytecount` to 0.6.2.
-
由 bors 提交于
Update cargo 12 commits in 90691f2bfe9a50291a98983b1ed2feab51d5ca55..1e8703890f285befb5e32627ad4e0a0454dde1fb 2021-03-16 21:36:55 +0000 to 2021-03-26 16:59:39 +0000 - tests: Tolerate "exit status" in error messages (rust-lang/cargo#9307) - Default macOS targets to `unpacked` debuginfo (rust-lang/cargo#9298) - Fix publication of packages with metadata and resolver (rust-lang/cargo#9300) - Fix config includes not working. (rust-lang/cargo#9299) - Emit note when `--future-incompat-report` had nothing to report (rust-lang/cargo#9263) - RFC 3052: Stop including authors field in manifests made by cargo new (rust-lang/cargo#9282) - Refactor feature handling, and improve error messages. (rust-lang/cargo#9290) - Split out cargo-util package for cargo-test-support. (rust-lang/cargo#9292) - Fix redundant_semicolons warning in resolver-tests. (rust-lang/cargo#9293) - Use serde's error message option to avoid implementing `Deserialize`. (rust-lang/cargo#9237) - Allow `cargo update` to operate with the --offline flag (rust-lang/cargo#9279) - Fix typo in faq.md (rust-lang/cargo#9285)
-
由 Eric Huss 提交于
-
由 lcnr 提交于
-
由 Linus Färnstrand 提交于
-
由 bors 提交于
Ban custom inner attributes in expressions and statements Split out from https://github.com/rust-lang/rust/pull/82608 Custom inner attributes are unstable, so this won't break any stable users. This allows us to speed up token collection, and avoid a redundant call to `collect_tokens_no_attrs` when parsing an `Expr` that has outer attributes. r? `@petrochenkov`
-