- 23 11月, 2017 2 次提交
-
-
由 Masahiro Yamada 提交于
The "rpm" has been kept for backward compatibility since pre-git era. I am planning to remove it after the Linux 4.18 release. Annouce the end of the support, prompting to use "rpm-pkg" instead. If you use "rpm", it will work like "rpm-pkg", but warning messages will be displayed as follows: WARNING: "rpm" target will be removed after Linux 4.18 Please use "rpm-pkg" instead. Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
-
由 Masahiro Yamada 提交于
For rpm-pkg and deb-pkg, a source tar file is created. All paths in the archive must be prefixed with the base name of the tar so that everything is contained in the directory when you extract it. Currently, scripts/package/Makefile uses a symlink for that, and removes it after the tar is created. If you terminate the build during the tar creation, the symlink is left over. Then, at the next package build, you will see a warning like follows: ln: '.' and 'kernel-4.14.0+/.' are the same file It is possible to fix it by adding -n (--no-dereference) option to the "ln" command, but a cleaner way is to use --transform option of "tar" command. This option is GNU extension, but it should not hurt to use it in the Linux build system. The 'S' flag is needed to exclude symlinks from the path fixup. Without it, symlinks in the kernel are broken. Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
-
- 14 11月, 2017 3 次提交
-
-
由 Masahiro Yamada 提交于
The spec file always passes %{?_smp_mflags}, but we have two problems here. [1] "make -jN rpm-pkg" emits the following warning message: make[2]: warning: -jN forced in submake: disabling jobserver mode. [2] We can not specify the number of jobs that run in parallel. Whether we give -jN or not from the top Makefile, the spec file always passes ${?_smp_mflags} to the build commands. ${?_smp_mflags} will be useful when we run rpmbuild by hand. When we invoke it from Makefile, -jN is propagated down to submake; it should not be overridden because we want to respect the number of jobs given by the user. Set _smp_mflags to empty string in this case. Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
-
由 Masahiro Yamada 提交于
If build fails during (bin)rpm-pkg, the spec file is not cleaned by anyone until the next successful build of the package. We do not have to immediately delete the spec file in case somebody may want to take a look at it. Instead, make them ignored by git, and cleaned up by make mrproper. Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
-
由 Masahiro Yamada 提交于
If "make rpm-pkg" or "make binrpm-pkg" is run with -j[jobs] option, the following warning message is displayed. warning: jobserver unavailable: using -j1. Add '+' to parent make rule. Follow the suggestion. Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
-
- 20 9月, 2017 1 次提交
-
-
由 Masahiro Yamada 提交于
The "Release:" field of the spec file is determined based on the .version file. However, the .version file is not copied to the source tar file. So, when we build the kernel from the source package, the UTS_VERSION always indicates #1. This does not match with "rpm -q". The kernel UTS_VERSION and "rpm -q" do not agree for binrpm-pkg, either. Please note the kernel has already been built before the spec file is created. Currently, mkspec invokes mkversion. This script returns an incremented version. So, the "Release:" field of the spec file is greater than the version in the kernel by one. For the source package build (where .version file is missing), we can give KBUILD_BUILD_VERSION=%{release} to the build command. For the binary package build, we can simply read out the .version file because it contains the version number that was used for building the kernel image. We can remove scripts/mkversion because scripts/package/Makefile need not touch the .version file. Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
-
- 16 5月, 2016 1 次提交
-
-
由 Srinivas Pandruvada 提交于
After commit 21a59991 ("scripts/package/Makefile: rpmbuild is needed for rpm targets"), it is no longer possible to specify RPMOPTS. For example, we can no longer able to control _topdir using the following make command. make RPMOPTS="--define '_topdir /home/xyz/workspace/'" binrpm-pkg Fixes: 21a59991 ("scripts/package/Makefile: rpmbuild is needed for rpm targets") Cc: <stable@vger.kernel.org> # 4.3+ Signed-off-by: NSrinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: NMichal Marek <mmarek@suse.com>
-
- 25 11月, 2015 1 次提交
-
-
由 Riku Voipio 提交于
building with $srctree != $objtree, perf-tar-* targets fail to read the MANIFEST file and add the PERF-VERSION-FILE needed by out-of-tree builds. The build errors and an incorrect tar is created: $ make O=build-x86 perf-targz-src-pkg TAR cat: ../tools/perf/MANIFEST: No such file or directory tar: perf-4.1.0-rc8/PERF-VERSION-FILE: Cannot stat: No such file or dir.. tar: Exiting with failure status due to previous errors Kbuild sets objtree to "." and srctree to ".." The command to output MANIFEST becomes: $(cd ..; echo $(cat ../tools/perf/MANIFEST)) Without MANIFEST, the entire kernel source tree is added to the perf source tarball. The *correct* fix is to keep the cd and remove srctree from cat command line since MANIFEST has wildcards that fail to expand working directory isn't srctree. Second, PERF-VERSION-FILE gets not added, because in-tree build path is hardcoded to Makefile: util/PERF-VERSION-GEN ../../$(perf-tar)/ 2>/dev/null) The PERF-VERSION-GEN needs to be run from tools/perf directory, and the output directory needs to be changed from relative to to absolute. This can be achieved using the $(CURDIR) variable. Also remove the error redirect to /dev/null which hid the error. Signed-off-by: NRiku Voipio <riku.voipio@linaro.org> Signed-off-by: NMichal Marek <mmarek@suse.com>
-
- 04 9月, 2015 2 次提交
-
-
由 Riku Voipio 提交于
Make deb-pkg build both source and binary package like make rpm-pkg does. For people who only need binary kernel package, there is now bindeb-pkg target, same target also used to build the .deb files if built from the source package using dpkg-buildpackage. Generated source package will build the same kernel .config than what was available for make deb-pkg. The name of the source package can be set with KDEB_SOURCENAME enviroment variable. The source package is useful for GPL compliance, or for feeding to a automated debian package builder. Cc: Chris J Arges <chris.j.arges@canonical.com> Reviewed-by: Nmaximilian attems <maks@stro.at> Reviewed-by: NBen Hutchings <ben@decadent.org.uk> Signed-off-by: NRiku Voipio <riku.voipio@linaro.org> Signed-off-by: NMichal Marek <mmarek@suse.com>
-
由 Riku Voipio 提交于
Split source tarball creation from rpm-pkg target so it can be used from deb-pkg target as well. As added bonus, we can now pretty print TAR the name of tarball created in quiet mode This patch prepares the groundwork for deb-pkg source package adding bit. Signed-off-by: NRiku Voipio <riku.voipio@linaro.org> Signed-off-by: NMichal Marek <mmarek@suse.com>
-
- 15 6月, 2015 1 次提交
-
-
由 Jim Davis 提交于
Before rpm release 4.1, in 2002, either the rpm command or the rpmbuild command could be used in the rpm-pkg or binrpm-pkg targets, and the Makefile chose the rpm command if the rpmbuild command wasn't found. After release 4.1, however, the rpm command could no longer be used in place of the rpmbuild command. As the rpmbuild command is not installed by default, this can lead to failures with the rpm-pkg and binrpm-pkg targets: rpm --define "_builddir ." --target \ x86_64 -bb ./binkernel.spec rpm --target: unknown option scripts/package/Makefile:60: recipe for target 'binrpm-pkg' failed Change the Makefile to use rpmbuild unconditionally to avoid this. Signed-off-by: NJim Davis <jim.epost@gmail.com> Signed-off-by: NMichal Marek <mmarek@suse.cz>
-
- 10 6月, 2014 1 次提交
-
-
由 Masahiro Yamada 提交于
Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
-
- 07 11月, 2013 1 次提交
-
-
由 David Ahern 提交于
When building perf out of tree: $ make perf-tar-src-pkg $ tar -xf perf-<ver>.tar -C /tmp $ cd /tmp/perf<ver> $ make -C tools/perf you get this warning message: make[1]: *** No rule to make target `kernelversion'. Stop. Fix it by saving the perf version in the tar file and using that for the out of tree builds. v2: removed short form request and fixed up version string from usual output. Signed-off-by: NDavid Ahern <dsahern@gmail.com> Suggested-by: NIngo Molnar <mingo@kernel.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lkml.kernel.org/r/1383753335-25782-1-git-send-email-dsahern@gmail.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 16 5月, 2013 1 次提交
-
-
由 Luiz Capitulino 提交于
Commit 65013203 dropped the rpm spec as a prerequisite for the binrpm-pkg target but forgot to update $< usage, which causes the rule to break. This commit fixes that by replacing $< with the spec name. Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com> Signed-off-by: NMichal Marek <mmarek@suse.cz>
-
- 18 4月, 2013 4 次提交
-
-
由 Michal Marek 提交于
Signed-off-by: NMichal Marek <mmarek@suse.cz>
-
由 Michal Marek 提交于
The *pkg targets are always run, so it makes no sense to cache the generated specfile. This also fixes build errors when the specfile becomes out of date, without the Makefile noticing it: $ make rpm works $ echo yadadada >localversion-test $ make rpm fails, because kernel.spec assumes the old kernel release string Signed-off-by: NMichal Marek <mmarek@suse.cz>
-
由 Michal Marek 提交于
Now that we only package explicitly listed files to the tarball, there is no need to abuse the parent directory. Signed-off-by: NMichal Marek <mmarek@suse.cz>
-
由 Michal Marek 提交于
The source tree can contain lots of uninteresting data like tag or cscope files, packaging which slows down make rpm needlessly. It can also break the build, if the tree contains an unrelated file named *.spec. The downside of this change is that new subdirectories have to be added to the KBUILD_ALLDIRS variable in the top-level Makefile. The upside is that the behavior is more predictable. Signed-off-by: NMichal Marek <mmarek@suse.cz>
-
- 08 4月, 2013 1 次提交
-
-
由 Bin Wang 提交于
KBUILD_OUTPUT is always empty here, so it is useless to test it. But while use O=.., objtree and srctree will be different. I compare them instead. Signed-off-by: NBin Wang <wbin00@gmail.com> Signed-off-by: NMichal Marek <mmarek@suse.cz>
-
- 30 10月, 2011 1 次提交
-
-
由 Paul Menzel 提交于
Signed-off-by: NPaul Menzel <paulepanter@users.sourceforge.net> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 24 6月, 2011 1 次提交
-
-
由 matt mooney 提交于
Specify --git-dir when building perf targets to allow out-of-tree builds using O=<build-dir>. The shell command in `git archive' had to be modified to allow proper file name expansion of the files listed in MANIFEST. Signed-off-by: Nmatt mooney <mfm@muteddisk.com> Signed-off-by: NMichal Marek <mmarek@suse.cz>
-
- 24 5月, 2011 1 次提交
-
-
由 Michal Marek 提交于
The better fix would be to stop using the parent directory (principle of least surprise), but as long as we use it, use it consistently. Signed-off-by: NMichal Marek <mmarek@suse.cz>
-
- 05 5月, 2011 1 次提交
-
-
由 Arun Sharma 提交于
Removing the '-' results in hard to read filenames such as: kernel-2.6.35.2000042g76e4caf-28.x86_64.rpm kernel-2.6.35.2_000042_g76e4caf-28.x86_64.rpm is easier to read. Signed-off-by: NArun Sharma <asharma@fb.com> Signed-off-by: NMichal Marek <mmarek@suse.cz>
-
- 09 3月, 2011 1 次提交
-
-
由 Zdenek Kaspar 提交于
Signed-off-by: NZdenek Kaspar <zkaspar82@gmail.com> Signed-off-by: NMichal Marek <mmarek@suse.cz>
-
- 21 7月, 2010 1 次提交
-
-
由 Michal Marek 提交于
make rpm was broken by commit 09155120: make clean set -e; cd ..; ln -sf /usr/src/iwlwifi-2.6 kernel-2.6.35rc4wl /bin/sh /usr/src/iwlwifi-2.6/scripts/setlocalversion --scm-only > /usr/src/iwlwifi-2.6/.scmversion cat: .scmversion: input file is output file make[1]: *** [rpm] Error 1 Reported-and-tested-by: N"Zheng, Jiajia" <jiajia.zheng@intel.com> Signed-off-by: NMichal Marek <mmarek@suse.cz>
-
- 18 6月, 2010 1 次提交
-
-
由 Michal Marek 提交于
Now that we run scripts/setlocalversion during every build, it makes sense to move all the localversion logic there. This cleans up the toplevel Makefile and also makes sure that the script is called only once in 'make prepare' (previously, it would be called every time due to a variable expansion in an ifneq statement). No user-visible change is intended, unless one runs the setlocalversion script directly. Reported-by: NDmitry Torokhov <dmitry.torokhov@gmail.com> Cc: David Rientjes <rientjes@google.com> Cc: Greg Thelen <gthelen@google.com> Cc: Nico Schottelius <nico-linuxsetlocalversion@schottelius.org> Signed-off-by: NMichal Marek <mmarek@suse.cz>
-
- 05 6月, 2010 1 次提交
-
-
由 Arnaldo Carvalho de Melo 提交于
Useful for when people want to try some version of the perf tools and don't wants to download the kernel tarball. Here is a session using this new target: [root@emilia linux-2.6-tip]# make help | grep -i perf perf-tar-src-pkg - Build perf-2.6.35-rc1.tar source tarball perf-targz-src-pkg - Build perf-2.6.35-rc1.tar.gz source tarball perf-tarbz2-src-pkg - Build perf-2.6.35-rc1.tar.bz2 source tarball [root@emilia linux-2.6-tip]# make perf-tarbz2-src-pkg TAR [root@emilia linux-2.6-tip]# ls -la perf-2.6.35-rc1.tar.bz2 -rw-r--r-- 1 root root 295731 May 31 11:18 perf-2.6.35-rc1.tar.bz2 [root@emilia linux-2.6-tip]# tar xf perf-2.6.35-rc1.tar.bz2 [root@emilia linux-2.6-tip]# cd perf-2.6.35-rc1 [root@emilia perf-2.6.35-rc1]# ls arch HEAD include lib tools [root@emilia perf-2.6.35-rc1]# cd tools/perf [root@emilia perf]# make -j9 2>&1 | tail CC arch/x86/util/dwarf-regs.o CC util/probe-finder.o CC util/newt.o CC util/scripting-engines/trace-event-perl.o CC scripts/perl/Perf-Trace-Util/Context.o CC perf.o CC builtin-help.o AR libperf.a LINK perf rm .perf.dev.null [root@emilia perf]# ./perf record -a sleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.262 MB perf.data (~11457 samples) ] [root@emilia perf]# ./perf report | head -12 # Events: 6K cycles # # Overhead Command Shared Object Symbol # ........ ............... .................. ...... # 4.73% perf [kernel.kallsyms] [k] format_decode 4.49% perf libc-2.12.so [.] _IO_file_underflow_internal 4.38% init [kernel.kallsyms] [k] mwait_idle 3.29% perf [kernel.kallsyms] [k] vsnprintf 2.38% init [kernel.kallsyms] [k] sched_clock_local 2.35% init [kernel.kallsyms] [k] apic_timer_interrupt 1.86% sirq-timer/5 [kernel.kallsyms] [k] find_busiest_group [root@emilia perf]# Acked-by: NMichal Marek <mmarek@suse.cz> Acked-by: NSam Ravnborg <sam@ravnborg.org> Cc: David S. Miller <davem@davemloft.net> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Michal Marek <mmarek@suse.cz> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <20100528185357.GA28009@ghostprotocols.net> Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 12 12月, 2009 2 次提交
-
-
由 Jonathan Nieder 提交于
Running "make deb-pkg" requires setting KBUILD_PKG_ROOTCMD or becoming root oneself or it errors out. Unless already running as root or KBUILD_PKG_ROOTCMD is already set, use fakeroot as a good default. With this patch applied, you can run "make oldconfig deb-pkg" as an ordinary user to build a binary package for an updated kernel tree and it should just work. fakeroot is too zealous by default in treating files as owned by root. Its wrapped stat() sets st_uid and st_gid to 0 for all files, which causes Git to go on a wild goose chase if CONFIG_LOCALVERSION_AUTO is set, checking if any file's content has changed along with its stat information. Avoid this by telling fakeroot to use the actual owner and group for preexisting files, by passing it the -u option. Signed-off-by: NJonathan Nieder <jrnieder@gmail.com> Signed-off-by: NMichal Marek <mmarek@suse.cz>
-
由 Jonathan Nieder 提交于
Let the deb-pkg target acquire (fake) root privileges before running commands that need them. Without such privileges, deb-pkg errors out because chown fails. The new KBUILD_PKG_ROOTCMD variable, if defined, is used as a command to run other commands with possibly fake elevated privileges. Since this is not needed for the tar-pkg and rpm-pkg targets, it is only used by deb-pkg. If it is not defined, the behavior is as before, and the user will have to rerun make as root. In other words, as a shortcut, instead of running 'make oldconfig && make && fakeroot -u make deb-pkg', one can use the single command 'make oldconfig deb-pkg KBUILD_PKG_ROOTCMD="fakeroot -u"'. Suggested-by: NRyan Anderson <ryan@michonline.com> Signed-off-by: NJonathan Nieder <jrnieder@gmail.com> Signed-off-by: NMichal Marek <mmarek@suse.cz>
-
- 12 10月, 2009 1 次提交
-
-
由 Frans Pop 提交于
The binrpm-pkg target (binary RPM only) fails when called with KBUILD_OUTPUT set. This patch makes it work. For the rpm-pkg target (source + binary RPM), building with KBUILD_OUTPUT set is not possible and also not needed as the actual build is done in a temporary directory anyway, so check that KBUILD_OUTPUT is not set in that case to avoid later errors. Signed-off-by: NFrans Pop <elendil@planet.nl> Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
-
- 07 3月, 2009 1 次提交
-
-
由 Josh Hunt 提交于
Running 'make rpm' fails when CONFIG_LOCALVERSION_AUTO=y and using a kernel source tree under SCM. This is due to KERNELRELEASE being different when the initial make is run and when make is run from rpmbuild. mkspec creates kernel.spec using KERNELRELEASE: <mkspec> echo "%files" echo '%defattr (-, root, root)' echo "%dir /lib/modules" echo "/lib/modules/$KERNELRELEASE" echo "/lib/firmware" echo "/boot/*" echo "" </mkspec> When CONFIG_LOCALVERSION_AUTO=y scripts/setlocalversion is called and grabs any additional version info from SCM. Next, the srctree is tarred up and SCM information is excluded. rpmbuild reruns make and in the process generates a new include/config/kernel.release and thus a new KERNELRELEASE. However this time the SCM information is gone so KERNELRELEASE no longer has the additional version information. When "make modules_install" runs, it uses the new KERNELRELEASE value to determine where to install the modules. This conflicts with where the spec file assumes they are going because of the mis-matching KERNELRELEASE versions. <snippet> + INSTALL_MOD_PATH=/var/tmp/kernel-2.6.29rc4tip01479g5d85422-root + make -j16 modules_install INSTALL crypto/aead.ko INSTALL crypto/cbc.ko INSTALL crypto/chainiv.ko INSTALL crypto/crc32c.ko INSTALL crypto/crypto_algapi.ko INSTALL crypto/crypto_blkcipher.ko INSTALL crypto/crypto_hash.ko INSTALL crypto/cryptomgr.ko INSTALL crypto/ecb.ko INSTALL crypto/eseqiv.ko INSTALL crypto/krng.ko INSTALL crypto/md5.ko INSTALL crypto/pcbc.ko INSTALL crypto/rng.ko INSTALL drivers/block/cciss.ko INSTALL drivers/hid/hid-dummy.ko INSTALL drivers/scsi/iscsi_tcp.ko INSTALL drivers/scsi/libiscsi.ko INSTALL drivers/scsi/libiscsi_tcp.ko INSTALL drivers/scsi/scsi_transport_iscsi.ko INSTALL drivers/scsi/scsi_wait_scan.ko INSTALL fs/lockd/lockd.ko INSTALL fs/nfs/nfs.ko INSTALL fs/nfsd/nfsd.ko INSTALL lib/libcrc32c.ko INSTALL net/sunrpc/sunrpc.ko DEPMOD 2.6.29-rc4-tip + cp arch/x86/boot/bzImage /var/tmp/kernel-2.6.29rc4tip01479g5d85422-root/boot/vmlinuz-2.6.29-rc4-tip-01479-g5d85422 + cp System.map /var/tmp/kernel-2.6.29rc4tip01479g5d85422-root/boot/System.map-2.6.29-rc4-tip-01479-g5d85422 + cp .config /var/tmp/kernel-2.6.29rc4tip01479g5d85422-root/boot/config-2.6.29-rc4-tip-01479-g5d85422 + cp vmlinux vmlinux.orig + bzip2 -9 vmlinux + mv vmlinux.bz2 /var/tmp/kernel-2.6.29rc4tip01479g5d85422-root/boot/vmlinux-2.6.29-rc4-tip-01479-g5d85422.bz2 + mv vmlinux.orig vmlinux + /usr/lib/rpm/brp-compress Processing files: kernel-2.6.29rc4tip01479g5d85422-2 error: File not found: /var/tmp/kernel-2.6.29rc4tip01479g5d85422-root/lib/modules/2.6.29-rc4-tip-01479-g5d85422 RPM build errors: File not found: /var/tmp/kernel-2.6.29rc4tip01479g5d85422-root/lib/modules/2.6.29-rc4-tip-01479-g5d85422 make[1]: *** [rpm] Error 1 make: *** [rpm] Error 2 </snippet> I have tested this patch on git -tip, Linus' git tree, and the kernel.org tar files, both with and without CONFIG_LOCALVERSION_AUTO=y. Signed-off-by: NJosh Hunt <josh@scalex86.org> Signed-off-by: NSam Ravnborg <sam@ravnborg.org> ----
-
- 06 12月, 2008 1 次提交
-
-
由 Robert P. J. Day 提交于
Given that there is no usage of a TAR_IGNORE variable remove it Signed-off-by: NRobert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
-
- 04 12月, 2008 1 次提交
-
-
由 Jeremy Kerr 提交于
Add a RPMOPTS make variable to allow arbitrary options to be passed to rpm during 'make rpm-pkg'. For example: make RPMOPTS="--define '_topdir /home/jk/rpm'" rpm-pkg Signed-off-by: NJeremy Kerr <jk@ozlabs.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
-
- 29 1月, 2008 1 次提交
-
-
由 Robert P. J. Day 提交于
Signed-off-by: NRobert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
-
- 09 3月, 2006 1 次提交
-
-
由 Sam Ravnborg 提交于
.PHONY: does not take patterns so use FORCE to achive same effect. Thanks to "Paul D. Smith" <psmith@gnu.org> for noticing this. Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
-
- 06 3月, 2006 1 次提交
-
-
由 Paul Smith 提交于
The kbuild system takes advantage of an incorrect behavior in GNU make. Once this behavior is fixed, all files in the kernel rebuild every time, even if nothing has changed. This patch ensures kbuild works with both the incorrect and correct behaviors of GNU make. For more details on the incorrect behavior, see: http://lists.gnu.org/archive/html/bug-make/2006-03/msg00003.html Changes in this patch: - Keep all targets that are to be marked .PHONY in a variable, PHONY. - Add .PHONY: $(PHONY) to mark them properly. - Remove any $(PHONY) files from the $? list when determining whether targets are up-to-date or not. Signed-off-by: NPaul Smith <psmith@gnu.org> Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
-
- 02 1月, 2006 1 次提交
-
-
由 Jan-Benedict Glaw 提交于
Fix out-of-tree builds for the tar-pkg targets When I wrote the buildtar script, I didn't even think about out-of-tree builds because I didn't use these back then. This patch throughoutly uses ${objtree} instead of `pwd`. Also, the kernel version is no longer manually built. Instead, it will properly use $KERNELRELEASE . Installing modules is only done if CONFIG_MODULES is set. Signed-off-by: NJan-Benedict Glaw <jbglaw@lug-owl.de> Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
-
- 22 7月, 2005 1 次提交
-
-
由 Coywolf Qi Hunt 提交于
This fixes kbuild make help binrpm-pkg missing `''. Signed-off-by: NCoywolf Qi Hunt <coywolf@lovecn.org> Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
-
- 15 7月, 2005 1 次提交
-
-
由 Sam Ravnborg 提交于
From: Ryan Anderson <ryan@michonline.com> When running "make O=something deb-pkg", I get a failure that claims I haven't configured my kernel (I have). Running it a second time tells me to run "make mrproper" (include/linux/version.h got built on the first run) Original patch from: From: Ajay Patel <patela@gmail.com> With modifications from: Signed-off-By: NRyan Anderson <ryan@michonline.com> Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
-
- 14 7月, 2005 1 次提交
-
-
由 Yum Rayan 提交于
This patch fixes the output of "make help" to fit in a 80 column screen. Please push upstream as part of your other patches. Signed-off-by: NYum Rayan <yum.rayan@gmail.com> Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
-