提交 4f193362 编写于 作者: P Paul Smith 提交者: Sam Ravnborg

kbuild: change kbuild to not rely on incorrect GNU make behavior

The kbuild system takes advantage of an incorrect behavior in GNU make.
Once this behavior is fixed, all files in the kernel rebuild every time,
even if nothing has changed.  This patch ensures kbuild works with both
the incorrect and correct behaviors of GNU make.

For more details on the incorrect behavior, see:

http://lists.gnu.org/archive/html/bug-make/2006-03/msg00003.html

Changes in this patch:
  - Keep all targets that are to be marked .PHONY in a variable, PHONY.
  - Add .PHONY: $(PHONY) to mark them properly.
  - Remove any $(PHONY) files from the $? list when determining whether
    targets are up-to-date or not.
Signed-off-by: NPaul Smith <psmith@gnu.org>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
上级 7b75b13c
......@@ -28,7 +28,7 @@ PS_METHOD = $(prefer-db2x)
###
# The targets that may be used.
.PHONY: xmldocs sgmldocs psdocs pdfdocs htmldocs mandocs installmandocs
PHONY += xmldocs sgmldocs psdocs pdfdocs htmldocs mandocs installmandocs
BOOKS := $(addprefix $(obj)/,$(DOCBOOKS))
xmldocs: $(BOOKS)
......@@ -211,3 +211,9 @@ clean-dirs := $(patsubst %.xml,%,$(DOCBOOKS))
#man put files in man subdir - traverse down
subdir- := man/
# Declare the contents of the .PHONY variable as phony. We keep that
# information in a variable se we can use it in if_changed and friends.
.PHONY: $(PHONY)
......@@ -95,7 +95,7 @@ ifdef O
endif
# That's our default target when none is given on the command line
.PHONY: _all
PHONY := _all
_all:
ifneq ($(KBUILD_OUTPUT),)
......@@ -106,7 +106,7 @@ KBUILD_OUTPUT := $(shell cd $(KBUILD_OUTPUT) && /bin/pwd)
$(if $(KBUILD_OUTPUT),, \
$(error output directory "$(saved-output)" does not exist))
.PHONY: $(MAKECMDGOALS)
PHONY += $(MAKECMDGOALS)
$(filter-out _all,$(MAKECMDGOALS)) _all:
$(if $(KBUILD_VERBOSE:1=),@)$(MAKE) -C $(KBUILD_OUTPUT) \
......@@ -123,7 +123,7 @@ ifeq ($(skip-makefile),)
# If building an external module we do not care about the all: rule
# but instead _all depend on modules
.PHONY: all
PHONY += all
ifeq ($(KBUILD_EXTMOD),)
_all: all
else
......@@ -337,14 +337,14 @@ export RCS_TAR_IGNORE := --exclude SCCS --exclude BitKeeper --exclude .svn --exc
# Rules shared between *config targets and build targets
# Basic helpers built in scripts/
.PHONY: scripts_basic
PHONY += scripts_basic
scripts_basic:
$(Q)$(MAKE) $(build)=scripts/basic
# To avoid any implicit rule to kick in, define an empty command.
scripts/basic/%: scripts_basic ;
.PHONY: outputmakefile
PHONY += outputmakefile
# outputmakefile generate a Makefile to be placed in output directory, if
# using a seperate output directory. This allows convinient use
# of make in output directory
......@@ -420,7 +420,7 @@ ifeq ($(KBUILD_EXTMOD),)
# Additional helpers built in scripts/
# Carefully list dependencies so we do not try to build scripts twice
# in parrallel
.PHONY: scripts
PHONY += scripts
scripts: scripts_basic include/config/MARKER
$(Q)$(MAKE) $(build)=$(@)
......@@ -720,7 +720,7 @@ $(sort $(vmlinux-init) $(vmlinux-main)) $(vmlinux-lds): $(vmlinux-dirs) ;
# make menuconfig etc.
# Error messages still appears in the original language
.PHONY: $(vmlinux-dirs)
PHONY += $(vmlinux-dirs)
$(vmlinux-dirs): prepare scripts
$(Q)$(MAKE) $(build)=$@
......@@ -773,10 +773,10 @@ kernelrelease = $(KERNELVERSION)$(localver-full)
# version.h and scripts_basic is processed / created.
# Listed in dependency order
.PHONY: prepare archprepare prepare0 prepare1 prepare2 prepare3
PHONY += prepare archprepare prepare0 prepare1 prepare2 prepare3
# prepare-all is deprecated, use prepare as valid replacement
.PHONY: prepare-all
PHONY += prepare-all
# prepare3 is used to check if we are building in a separate output directory,
# and if so do:
......@@ -857,7 +857,7 @@ include/linux/version.h: $(srctree)/Makefile .config .kernelrelease FORCE
# ---------------------------------------------------------------------------
.PHONY: depend dep
PHONY += depend dep
depend dep:
@echo '*** Warning: make $@ is unnecessary now.'
......@@ -872,21 +872,21 @@ all: modules
# Build modules
.PHONY: modules
PHONY += modules
modules: $(vmlinux-dirs) $(if $(KBUILD_BUILTIN),vmlinux)
@echo ' Building modules, stage 2.';
$(Q)$(MAKE) -rR -f $(srctree)/scripts/Makefile.modpost
# Target to prepare building external modules
.PHONY: modules_prepare
PHONY += modules_prepare
modules_prepare: prepare scripts
# Target to install modules
.PHONY: modules_install
PHONY += modules_install
modules_install: _modinst_ _modinst_post
.PHONY: _modinst_
PHONY += _modinst_
_modinst_:
@if [ -z "`$(DEPMOD) -V 2>/dev/null | grep module-init-tools`" ]; then \
echo "Warning: you may need to install module-init-tools"; \
......@@ -913,7 +913,7 @@ depmod_opts :=
else
depmod_opts := -b $(INSTALL_MOD_PATH) -r
endif
.PHONY: _modinst_post
PHONY += _modinst_post
_modinst_post: _modinst_
if [ -r System.map -a -x $(DEPMOD) ]; then $(DEPMOD) -ae -F System.map $(depmod_opts) $(KERNELRELEASE); fi
......@@ -956,7 +956,7 @@ clean: rm-dirs := $(CLEAN_DIRS)
clean: rm-files := $(CLEAN_FILES)
clean-dirs := $(addprefix _clean_,$(srctree) $(vmlinux-alldirs))
.PHONY: $(clean-dirs) clean archclean
PHONY += $(clean-dirs) clean archclean
$(clean-dirs):
$(Q)$(MAKE) $(clean)=$(patsubst _clean_%,%,$@)
......@@ -974,7 +974,7 @@ mrproper: rm-dirs := $(wildcard $(MRPROPER_DIRS))
mrproper: rm-files := $(wildcard $(MRPROPER_FILES))
mrproper-dirs := $(addprefix _mrproper_,Documentation/DocBook scripts)
.PHONY: $(mrproper-dirs) mrproper archmrproper
PHONY += $(mrproper-dirs) mrproper archmrproper
$(mrproper-dirs):
$(Q)$(MAKE) $(clean)=$(patsubst _mrproper_%,%,$@)
......@@ -984,7 +984,7 @@ mrproper: clean archmrproper $(mrproper-dirs)
# distclean
#
.PHONY: distclean
PHONY += distclean
distclean: mrproper
@find $(srctree) $(RCS_FIND_IGNORE) \
......@@ -1000,7 +1000,7 @@ distclean: mrproper
# rpm target kept for backward compatibility
package-dir := $(srctree)/scripts/package
.PHONY: %-pkg rpm
PHONY += %-pkg rpm
%pkg: FORCE
$(Q)$(MAKE) -f $(package-dir)/Makefile $@
......@@ -1092,12 +1092,12 @@ else # KBUILD_EXTMOD
# We are always building modules
KBUILD_MODULES := 1
.PHONY: crmodverdir
PHONY += crmodverdir
crmodverdir:
$(Q)rm -rf $(MODVERDIR)
$(Q)mkdir -p $(MODVERDIR)
.PHONY: $(objtree)/Module.symvers
PHONY += $(objtree)/Module.symvers
$(objtree)/Module.symvers:
@test -e $(objtree)/Module.symvers || ( \
echo; \
......@@ -1106,7 +1106,7 @@ $(objtree)/Module.symvers:
echo )
module-dirs := $(addprefix _module_,$(KBUILD_EXTMOD))
.PHONY: $(module-dirs) modules
PHONY += $(module-dirs) modules
$(module-dirs): crmodverdir $(objtree)/Module.symvers
$(Q)$(MAKE) $(build)=$(patsubst _module_%,%,$@)
......@@ -1114,11 +1114,11 @@ modules: $(module-dirs)
@echo ' Building modules, stage 2.';
$(Q)$(MAKE) -rR -f $(srctree)/scripts/Makefile.modpost
.PHONY: modules_install
PHONY += modules_install
modules_install: _emodinst_ _emodinst_post
install-dir := $(if $(INSTALL_MOD_DIR),$(INSTALL_MOD_DIR),extra)
.PHONY: _emodinst_
install-dir := $(if $(INSTALL_MOD_DIR),$(INSTALL_MOD_DIR),extra)
PHONY += _emodinst_
_emodinst_:
$(Q)rm -rf $(MODLIB)/$(install-dir)
$(Q)mkdir -p $(MODLIB)/$(install-dir)
......@@ -1133,13 +1133,13 @@ quiet_cmd_depmod = DEPMOD $(KERNELRELEASE)
$(KERNELRELEASE); \
fi
.PHONY: _emodinst_post
PHONY += _emodinst_post
_emodinst_post: _emodinst_
$(call cmd,depmod)
clean-dirs := $(addprefix _clean_,$(KBUILD_EXTMOD))
.PHONY: $(clean-dirs) clean
PHONY += $(clean-dirs) clean
$(clean-dirs):
$(Q)$(MAKE) $(clean)=$(patsubst _clean_%,%,$@)
......@@ -1161,7 +1161,7 @@ help:
@echo ''
# Dummies...
.PHONY: prepare scripts
PHONY += prepare scripts
prepare: ;
scripts: ;
endif # KBUILD_EXTMOD
......@@ -1274,7 +1274,7 @@ namespacecheck:
endif #ifeq ($(config-targets),1)
endif #ifeq ($(mixed-targets),1)
.PHONY: checkstack
PHONY += checkstack
checkstack:
$(OBJDUMP) -d vmlinux $$(find . -name '*.ko') | \
$(PERL) $(src)/scripts/checkstack.pl $(ARCH)
......@@ -1357,4 +1357,10 @@ clean := -f $(if $(KBUILD_SRC),$(srctree)/)scripts/Makefile.clean obj
endif # skip-makefile
PHONY += FORCE
FORCE:
# Declare the contents of the .PHONY variable as phony. We keep that
# information in a variable se we can use it in if_changed and friends.
.PHONY: $(PHONY)
#
# arch/arm/Makefile
#
# This file is included by the global makefile so that you can add your own
# architecture-specific flags and dependencies.
#
# This file is subject to the terms and conditions of the GNU General Public
# License. See the file "COPYING" in the main directory of this archive
# for more details.
......@@ -176,7 +179,7 @@ endif
archprepare: maketools
.PHONY: maketools FORCE
PHONY += maketools FORCE
maketools: include/linux/version.h include/asm-arm/.arch FORCE
$(Q)$(MAKE) $(build)=arch/arm/tools include/asm-arm/mach-types.h
......
#
# arch/arm/boot/Makefile
#
# This file is included by the global makefile so that you can add your own
# architecture-specific flags and dependencies.
#
# This file is subject to the terms and conditions of the GNU General Public
# License. See the file "COPYING" in the main directory of this archive
# for more details.
......@@ -73,7 +76,7 @@ $(obj)/bootpImage: $(obj)/bootp/bootp FORCE
$(call if_changed,objcopy)
@echo ' Kernel: $@ is ready'
.PHONY: initrd FORCE
PHONY += initrd FORCE
initrd:
@test "$(INITRD_PHYS)" != "" || \
(echo This machine does not support INITRD; exit -1)
......
#
# linux/arch/arm/boot/bootp/Makefile
#
# This file is included by the global makefile so that you can add your own
# architecture-specific flags and dependencies.
#
LDFLAGS_bootp :=-p --no-undefined -X \
--defsym initrd_phys=$(INITRD_PHYS) \
......@@ -21,4 +24,4 @@ $(obj)/kernel.o: arch/arm/boot/zImage FORCE
$(obj)/initrd.o: $(INITRD) FORCE
.PHONY: $(INITRD) FORCE
PHONY += $(INITRD) FORCE
#
# arch/arm26/Makefile
#
# This file is included by the global makefile so that you can add your own
# architecture-specific flags and dependencies.
#
# This file is subject to the terms and conditions of the GNU General Public
# License. See the file "COPYING" in the main directory of this archive
# for more details.
......@@ -49,9 +52,9 @@ all: zImage
boot := arch/arm26/boot
.PHONY: maketools FORCE
PHONY += maketools FORCE
maketools: FORCE
# Convert bzImage to zImage
bzImage: vmlinux
......
#
# arch/arm26/boot/Makefile
#
# This file is included by the global makefile so that you can add your own
# architecture-specific flags and dependencies.
#
# This file is subject to the terms and conditions of the GNU General Public
# License. See the file "COPYING" in the main directory of this archive
# for more details.
......@@ -60,7 +63,7 @@ $(obj)/xipImage: vmlinux FORCE
@echo ' Kernel: $@ is ready'
endif
.PHONY: initrd
PHONY += initrd
initrd:
@test "$(INITRD_PHYS)" != "" || \
(echo This machine does not support INITRD; exit -1)
......
......@@ -99,8 +99,8 @@ AFLAGS += $(mflags-y)
boot := arch/i386/boot
.PHONY: zImage bzImage compressed zlilo bzlilo \
zdisk bzdisk fdimage fdimage144 fdimage288 install
PHONY += zImage bzImage compressed zlilo bzlilo \
zdisk bzdisk fdimage fdimage144 fdimage288 install
all: bzImage
......
#
# ia64/Makefile
#
# This file is included by the global makefile so that you can add your own
# architecture-specific flags and dependencies.
#
# This file is subject to the terms and conditions of the GNU General Public
# License. See the file "COPYING" in the main directory of this archive
# for more details.
......@@ -62,7 +65,7 @@ drivers-$(CONFIG_OPROFILE) += arch/ia64/oprofile/
boot := arch/ia64/hp/sim/boot
.PHONY: boot compressed check
PHONY += boot compressed check
all: compressed unwcheck
......
#
# m32r/Makefile
#
# This file is included by the global makefile so that you can add your own
# architecture-specific flags and dependencies.
#
LDFLAGS :=
OBJCOPYFLAGS := -O binary -R .note -R .comment -S
......@@ -39,7 +42,7 @@ drivers-$(CONFIG_OPROFILE) += arch/m32r/oprofile/
boot := arch/m32r/boot
.PHONY: zImage
PHONY += zImage
all: zImage
......
......@@ -150,7 +150,7 @@ CPPFLAGS_vmlinux.lds := -Upowerpc
BOOT_TARGETS = zImage zImage.initrd znetboot znetboot.initrd vmlinux.sm uImage
.PHONY: $(BOOT_TARGETS)
PHONY += $(BOOT_TARGETS)
boot := arch/$(ARCH)/boot
......
......@@ -82,7 +82,7 @@ drivers-$(CONFIG_OPROFILE) += arch/powerpc/oprofile/
BOOT_TARGETS = zImage zImage.initrd znetboot znetboot.initrd vmlinux.sm
.PHONY: $(BOOT_TARGETS)
PHONY += $(BOOT_TARGETS)
all: uImage zImage
......
#
# arch/ppc/boot/Makefile
#
# This file is included by the global makefile so that you can add your own
# architecture-specific flags and dependencies.
#
# This file is subject to the terms and conditions of the GNU General Public
# License. See the file "COPYING" in the main directory of this archive
# for more details.
......@@ -25,7 +28,7 @@ subdir- += simple openfirmware
hostprogs-y := $(addprefix utils/, addnote mknote hack-coff mkprep mkbugboot mktree)
.PHONY: $(BOOT_TARGETS) $(bootdir-y)
PHONY += $(BOOT_TARGETS) $(bootdir-y)
$(BOOT_TARGETS): $(bootdir-y)
......
# Makefile for making bootable images on various OpenFirmware machines.
#
# This file is included by the global makefile so that you can add your own
# architecture-specific flags and dependencies.
#
# Paul Mackerras January 1997
# XCOFF bootable images for PowerMacs
# Geert Uytterhoeven September 1997
......@@ -86,7 +89,7 @@ $(images)/zImage.chrp-rs6k $(images)/zImage.initrd.chrp-rs6k: \
# The targets used on the make command-line
.PHONY: zImage zImage.initrd
PHONY += zImage zImage.initrd
zImage: $(images)/zImage.chrp \
$(images)/zImage.chrp-rs6k
@echo ' kernel: $@ is ready ($<)'
......@@ -96,7 +99,7 @@ zImage.initrd: $(images)/zImage.initrd.chrp \
TFTPIMAGE := /tftpboot/zImage
.PHONY: znetboot znetboot.initrd
PHONY += znetboot znetboot.initrd
znetboot: $(images)/zImage.chrp
cp $(images)/zImage.chrp $(TFTPIMAGE).chrp$(END)
@echo ' kernel: $@ is ready ($<)'
......
......@@ -172,7 +172,7 @@ include/asm-sh/.mach: $(wildcard include/config/sh/*.h) include/config/MARKER
archprepare: maketools include/asm-sh/.cpu include/asm-sh/.mach
.PHONY: maketools FORCE
PHONY += maketools FORCE
maketools: include/linux/version.h FORCE
$(Q)$(MAKE) $(build)=arch/sh/tools include/asm-sh/machtypes.h
......
#
#
# This file is included by the global makefile so that you can add your own
# architecture-specific flags and dependencies.
#
# Copyright (C) 2002 Jeff Dike (jdike@karaya.com)
# Licensed under the GPL
#
......@@ -88,7 +91,7 @@ CONFIG_KERNEL_HALF_GIGS ?= 0
SIZE = (($(CONFIG_NEST_LEVEL) + $(CONFIG_KERNEL_HALF_GIGS)) * 0x20000000)
.PHONY: linux
PHONY += linux
all: linux
......
......@@ -67,8 +67,8 @@ drivers-$(CONFIG_OPROFILE) += arch/x86_64/oprofile/
boot := arch/x86_64/boot
.PHONY: bzImage bzlilo install archmrproper \
fdimage fdimage144 fdimage288 archclean
PHONY += bzImage bzlilo install archmrproper \
fdimage fdimage144 fdimage288 archclean
#Default target when executing "make"
all: bzImage
......
......@@ -116,16 +116,18 @@ make-cmd = $(subst \#,\\\#,$(subst $$,$$$$,$(call escsq,$(cmd_$(1)))))
# function to only execute the passed command if necessary
# >'< substitution is for echo to work, >$< substitution to preserve $ when reloading .cmd file
# note: when using inline perl scripts [perl -e '...$$t=1;...'] in $(cmd_xxx) double $$ your perl vars
#
if_changed = $(if $(strip $? $(call arg-check, $(cmd_$(1)), $(cmd_$@)) ), \
#
if_changed = $(if $(strip $(filter-out $(PHONY),$?) \
$(call arg-check, $(cmd_$(1)), $(cmd_$@)) ), \
@set -e; \
$(echo-cmd) $(cmd_$(1)); \
echo 'cmd_$@ := $(make-cmd)' > $(@D)/.$(@F).cmd)
# execute the command and also postprocess generated .d dependencies
# file
if_changed_dep = $(if $(strip $? $(filter-out FORCE $(wildcard $^),$^)\
$(call arg-check, $(cmd_$(1)), $(cmd_$@)) ), \
if_changed_dep = $(if $(strip $(filter-out $(PHONY),$?) \
$(filter-out FORCE $(wildcard $^),$^) \
$(call arg-check, $(cmd_$(1)), $(cmd_$@)) ), \
@set -e; \
$(echo-cmd) $(cmd_$(1)); \
scripts/basic/fixdep $(depfile) $@ '$(make-cmd)' > $(@D)/.$(@F).tmp; \
......@@ -135,6 +137,7 @@ if_changed_dep = $(if $(strip $? $(filter-out FORCE $(wildcard $^),$^)\
# Usage: $(call if_changed_rule,foo)
# will check if $(cmd_foo) changed, or any of the prequisites changed,
# and if so will execute $(rule_foo)
if_changed_rule = $(if $(strip $? $(call arg-check, $(cmd_$(1)), $(cmd_$@)) ),\
if_changed_rule = $(if $(strip $(filter-out $(PHONY),$?) \
$(call arg-check, $(cmd_$(1)), $(cmd_$@)) ),\
@set -e; \
$(rule_$(1)))
......@@ -4,7 +4,7 @@
src := $(obj)
.PHONY: __build
PHONY := __build
__build:
# Read .config if it exist, otherwise ignore
......@@ -308,14 +308,14 @@ targets += $(multi-used-y) $(multi-used-m)
# Descending
# ---------------------------------------------------------------------------
.PHONY: $(subdir-ym)
PHONY += $(subdir-ym)
$(subdir-ym):
$(Q)$(MAKE) $(build)=$@
# Add FORCE to the prequisites of a target to force it to be always rebuilt.
# ---------------------------------------------------------------------------
.PHONY: FORCE
PHONY += FORCE
FORCE:
......@@ -330,3 +330,9 @@ cmd_files := $(wildcard $(foreach f,$(targets),$(dir $(f)).$(notdir $(f)).cmd))
ifneq ($(cmd_files),)
include $(cmd_files)
endif
# Declare the contents of the .PHONY variable as phony. We keep that
# information in a variable se we can use it in if_changed and friends.
.PHONY: $(PHONY)
......@@ -4,7 +4,7 @@
src := $(obj)
.PHONY: __clean
PHONY := __clean
__clean:
# Shorthand for $(Q)$(MAKE) scripts/Makefile.clean obj=dir
......@@ -87,10 +87,16 @@ endif
# Descending
# ---------------------------------------------------------------------------
.PHONY: $(subdir-ymn)
PHONY += $(subdir-ymn)
$(subdir-ymn):
$(Q)$(MAKE) $(clean)=$@
# If quiet is set, only print short version of command
cmd = @$(if $($(quiet)cmd_$(1)),echo ' $($(quiet)cmd_$(1))' &&) $(cmd_$(1))
# Declare the contents of the .PHONY variable as phony. We keep that
# information in a variable se we can use it in if_changed and friends.
.PHONY: $(PHONY)
......@@ -2,7 +2,7 @@
# Installing modules
# ==========================================================================
.PHONY: __modinst
PHONY := __modinst
__modinst:
include scripts/Kbuild.include
......@@ -12,7 +12,7 @@ include scripts/Kbuild.include
__modules := $(sort $(shell grep -h '\.ko' /dev/null $(wildcard $(MODVERDIR)/*.mod)))
modules := $(patsubst %.o,%.ko,$(wildcard $(__modules:.ko=.o)))
.PHONY: $(modules)
PHONY += $(modules)
__modinst: $(modules)
@:
......@@ -27,3 +27,9 @@ modinst_dir = $(if $(KBUILD_EXTMOD),$(ext-mod-dir),kernel/$(@D))
$(modules):
$(call cmd,modules_install,$(MODLIB)/$(modinst_dir))
# Declare the contents of the .PHONY variable as phony. We keep that
# information in a variable se we can use it in if_changed and friends.
.PHONY: $(PHONY)
......@@ -32,7 +32,7 @@
# Step 4 is solely used to allow module versioning in external modules,
# where the CRC of each module is retrieved from the Module.symers file.
.PHONY: _modpost
PHONY := _modpost
_modpost: __modpost
include .config
......@@ -60,7 +60,7 @@ quiet_cmd_modpost = MODPOST
$(if $(KBUILD_EXTMOD),-o $(modulesymfile)) \
$(filter-out FORCE,$^)
.PHONY: __modpost
PHONY += __modpost
__modpost: $(wildcard vmlinux) $(modules:.ko=.o) FORCE
$(call cmd,modpost)
......@@ -97,7 +97,7 @@ targets += $(modules)
# Add FORCE to the prequisites of a target to force it to be always rebuilt.
# ---------------------------------------------------------------------------
.PHONY: FORCE
PHONY += FORCE
FORCE:
......@@ -112,3 +112,9 @@ cmd_files := $(wildcard $(foreach f,$(targets),$(dir $(f)).$(notdir $(f)).cmd))
ifneq ($(cmd_files),)
include $(cmd_files)
endif
# Declare the contents of the .PHONY variable as phony. We keep that
# information in a variable se we can use it in if_changed and friends.
.PHONY: $(PHONY)
......@@ -2,7 +2,7 @@
# Kernel configuration targets
# These targets are used from top-level makefile
.PHONY: oldconfig xconfig gconfig menuconfig config silentoldconfig update-po-config
PHONY += oldconfig xconfig gconfig menuconfig config silentoldconfig update-po-config
xconfig: $(obj)/qconf
$< arch/$(ARCH)/Kconfig
......@@ -42,7 +42,7 @@ update-po-config: $(obj)/kxgettext
$(Q)rm -f arch/um/Kconfig_arch
$(Q)rm -f scripts/kconfig/linux_*.pot scripts/kconfig/config.pot
.PHONY: randconfig allyesconfig allnoconfig allmodconfig defconfig
PHONY += randconfig allyesconfig allnoconfig allmodconfig defconfig
randconfig: $(obj)/conf
$< -r arch/$(ARCH)/Kconfig
......
......@@ -7,10 +7,10 @@ check-lxdialog := $(srctree)/$(src)/check-lxdialog.sh
# we really need to do so. (Do not call gcc as part of make mrproper)
HOST_EXTRACFLAGS = $(shell $(CONFIG_SHELL) $(check-lxdialog) -ccflags)
HOST_LOADLIBES = $(shell $(CONFIG_SHELL) $(check-lxdialog) -ldflags $(HOSTCC))
HOST_EXTRACFLAGS += -DLOCALE
.PHONY: dochecklxdialog
HOST_EXTRACFLAGS += -DLOCALE
PHONY += dochecklxdialog
$(obj)/dochecklxdialog:
$(Q)$(CONFIG_SHELL) $(check-lxdialog) -check $(HOSTCC) $(HOST_LOADLIBES)
......
......@@ -32,7 +32,7 @@ MKSPEC := $(srctree)/scripts/package/mkspec
PREV := set -e; cd ..;
# rpm-pkg
.PHONY: rpm-pkg rpm
PHONY += rpm-pkg rpm
$(objtree)/kernel.spec: $(MKSPEC) $(srctree)/Makefile
$(CONFIG_SHELL) $(MKSPEC) > $@
......@@ -54,10 +54,10 @@ rpm-pkg rpm: $(objtree)/kernel.spec
clean-files := $(objtree)/kernel.spec
# binrpm-pkg
.PHONY: binrpm-pkg
PHONY += binrpm-pkg
$(objtree)/binkernel.spec: $(MKSPEC) $(srctree)/Makefile
$(CONFIG_SHELL) $(MKSPEC) prebuilt > $@
binrpm-pkg: $(objtree)/binkernel.spec
$(MAKE) KBUILD_SRC=
set -e; \
......@@ -72,7 +72,7 @@ clean-files += $(objtree)/binkernel.spec
# Deb target
# ---------------------------------------------------------------------------
#
.PHONY: deb-pkg
PHONY += deb-pkg
deb-pkg:
$(MAKE) KBUILD_SRC=
$(CONFIG_SHELL) $(srctree)/scripts/package/builddeb
......@@ -82,7 +82,7 @@ clean-dirs += $(objtree)/debian/
# tarball targets
# ---------------------------------------------------------------------------
.PHONY: tar%pkg
PHONY += tar%pkg
tar%pkg:
$(MAKE) KBUILD_SRC=
$(CONFIG_SHELL) $(srctree)/scripts/package/buildtar $@
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册