- 19 2月, 2016 1 次提交
-
-
由 Jiri Benc 提交于
ether_setup sets IFF_TX_SKB_SHARING but this is not supported by gre as it modifies the skb on xmit. Also, clean up whitespace in ipgre_tap_setup when we're already touching it. Signed-off-by: NJiri Benc <jbenc@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 10 2月, 2016 1 次提交
-
-
由 David Wragg 提交于
Prior to 4.3, openvswitch tunnel vports (vxlan, gre and geneve) could transmit vxlan packets of any size, constrained only by the ability to send out the resulting packets. 4.3 introduced netdevs corresponding to tunnel vports. These netdevs have an MTU, which limits the size of a packet that can be successfully encapsulated. The default MTU values are low (1500 or less), which is awkwardly small in the context of physical networks supporting jumbo frames, and leads to a conspicuous change in behaviour for userspace. Instead, set the MTU on openvswitch-created netdevs to be the relevant maximum (i.e. the maximum IP packet size minus any relevant overhead), effectively restoring the behaviour prior to 4.3. Signed-off-by: NDavid Wragg <david@weave.works> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 26 12月, 2015 1 次提交
-
-
由 Pravin B Shelar 提交于
By moving stats update into iptunnel_xmit(), we can simplify iptunnel_xmit() usage. With this change there is no need to call another function (iptunnel_xmit_stats()) to update stats in tunnel xmit code path. Signed-off-by: NPravin B Shelar <pshelar@nicira.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 01 12月, 2015 1 次提交
-
-
由 Nikolay Aleksandrov 提交于
It looks like many files are including mroute.h unnecessarily, so remove the include. Most importantly remove it from ipv6. CC: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> CC: Steffen Klassert <steffen.klassert@secunet.com> CC: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NNikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 23 10月, 2015 1 次提交
-
-
由 Pravin B Shelar 提交于
While transitioning to netdev based vport we broke OVS feature which allows user to retrieve tunnel packet egress information for lwtunnel devices. Following patch fixes it by introducing ndo operation to get the tunnel egress info. Same ndo operation can be used for lwtunnel devices and compat ovs-tnl-vport devices. So after adding such device operation we can remove similar operation from ovs-vport. Fixes: 614732ea ("openvswitch: Use regular VXLAN net_device device"). Signed-off-by: NPravin B Shelar <pshelar@nicira.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 30 8月, 2015 2 次提交
-
-
由 Jiri Benc 提交于
There's currently nothing preventing directing packets with IPv6 encapsulation data to IPv4 tunnels (and vice versa). If this happens, IPv6 addresses are incorrectly interpreted as IPv4 ones. Track whether the given ip_tunnel_key contains IPv4 or IPv6 data. Store this in ip_tunnel_info. Reject packets at appropriate places if they are supposed to be encapsulated into an incompatible protocol. Signed-off-by: NJiri Benc <jbenc@redhat.com> Acked-by: NAlexei Starovoitov <ast@plumgrid.com> Acked-by: NThomas Graf <tgraf@suug.ch> Acked-by: NPravin B Shelar <pshelar@nicira.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Benc 提交于
The mode field holds a single bit of information only (whether the ip_tunnel_info struct is for rx or tx). Change the mode field to bit flags. This allows more mode flags to be added. Signed-off-by: NJiri Benc <jbenc@redhat.com> Acked-by: NAlexei Starovoitov <ast@plumgrid.com> Acked-by: NThomas Graf <tgraf@suug.ch> Acked-by: NPravin B Shelar <pshelar@nicira.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 28 8月, 2015 1 次提交
-
-
由 Pravin B Shelar 提交于
Introduce function udp_tun_rx_dst() to initialize tunnel dst on receive path. Signed-off-by: NPravin B Shelar <pshelar@nicira.com> Reviewed-by: NJesse Gross <jesse@nicira.com> Acked-by: NThomas Graf <tgraf@suug.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 21 8月, 2015 3 次提交
-
-
由 Jiri Benc 提交于
Currently, the lwtunnel state resides in per-protocol data. This is a problem if we encapsulate ipv6 traffic in an ipv4 tunnel (or vice versa). The xmit function of the tunnel does not know whether the packet has been routed to it by ipv4 or ipv6, yet it needs the lwtstate data. Moving the lwtstate data to dst_entry makes such inter-protocol tunneling possible. As a bonus, this brings a nice diffstat. Signed-off-by: NJiri Benc <jbenc@redhat.com> Acked-by: NRoopa Prabhu <roopa@cumulusnetworks.com> Acked-by: NThomas Graf <tgraf@suug.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Benc 提交于
Rename the ipv4_tos and ipv4_ttl fields to just 'tos' and 'ttl', as they'll be used with IPv6 tunnels, too. Signed-off-by: NJiri Benc <jbenc@redhat.com> Acked-by: NThomas Graf <tgraf@suug.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Benc 提交于
Add the IPv6 addresses as an union with IPv4 ones. When using IPv4, the newly introduced padding after the IPv4 addresses needs to be zeroed out. Signed-off-by: NJiri Benc <jbenc@redhat.com> Acked-by: NThomas Graf <tgraf@suug.ch> Acked-by: NAlexei Starovoitov <ast@plumgrid.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 11 8月, 2015 3 次提交
-
-
由 Pravin B Shelar 提交于
Support for sharing GREPROTO_CISCO port was added so that OVS gre port and kernel GRE devices can co-exist. After flow-based tunneling patches OVS GRE protocol processing is completely moved to ip_gre module. so there is no need for GRE protocol hook. Following patch consolidates GRE protocol related functions into ip_gre module. Signed-off-by: NPravin B Shelar <pshelar@nicira.com> Acked-by: NThomas Graf <tgraf@suug.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pravin B Shelar 提交于
Using GRE tunnel meta data collection feature, we can implement OVS GRE vport. This patch removes all of the OVS specific GRE code and make OVS use a ip_gre net_device. Minimal GRE vport is kept to handle compatibility with current userspace application. Signed-off-by: NPravin B Shelar <pshelar@nicira.com> Acked-by: NThomas Graf <tgraf@suug.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pravin B Shelar 提交于
Following patch create new tunnel flag which enable tunnel metadata collection on given device. Signed-off-by: NPravin B Shelar <pshelar@nicira.com> Acked-by: NThomas Graf <tgraf@suug.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 04 4月, 2015 1 次提交
-
-
由 Ian Morris 提交于
The ipv4 code uses a mixture of coding styles. In some instances check for NULL pointer is done as x == NULL and sometimes as !x. !x is preferred according to checkpatch and this patch makes the code consistent by adopting the latter form. No changes detected by objdiff. Signed-off-by: NIan Morris <ipm@chirality.org.uk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 03 4月, 2015 1 次提交
-
-
由 Nicolas Dichtel 提交于
Don't use dev->iflink anymore. CC: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: NNicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 01 4月, 2015 2 次提交
-
-
由 Jiri Benc 提交于
Those are counterparts to nla_put_in_addr and nla_put_in6_addr. Signed-off-by: NJiri Benc <jbenc@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Benc 提交于
IP addresses are often stored in netlink attributes. Add generic functions to do that. For nla_put_in_addr, it would be nicer to pass struct in_addr but this is not used universally throughout the kernel, in way too many places __be32 is used to store IPv4 address. Signed-off-by: NJiri Benc <jbenc@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 09 2月, 2015 1 次提交
-
-
由 Sabrina Dubroca 提交于
encap.sport and encap.dport are __be16, use nla_{get,put}_be16 instead of nla_{get,put}_u16. Fixes the sparse warnings: warning: incorrect type in assignment (different base types) expected restricted __be32 [addressable] [usertype] o_key got restricted __be16 [addressable] [usertype] i_flags warning: incorrect type in assignment (different base types) expected restricted __be16 [usertype] sport got unsigned short warning: incorrect type in assignment (different base types) expected restricted __be16 [usertype] dport got unsigned short warning: incorrect type in argument 3 (different base types) expected unsigned short [unsigned] [usertype] value got restricted __be16 [usertype] sport warning: incorrect type in argument 3 (different base types) expected unsigned short [unsigned] [usertype] value got restricted __be16 [usertype] dport Signed-off-by: NSabrina Dubroca <sd@queasysnail.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 20 1月, 2015 1 次提交
-
-
由 Nicolas Dichtel 提交于
Implement rtnl_link_ops->get_link_net() callback so that IFLA_LINK_NETNSID is added to rtnetlink messages. Signed-off-by: NNicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 01 1月, 2015 1 次提交
-
-
由 stephen hemminger 提交于
The GRE tap device supports Ethernet over GRE, but doesn't care about the source address of the tunnel, therefore it can be changed without bring device down. Signed-off-by: NStephen Hemminger <stephen@networkplumber.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 16 12月, 2014 1 次提交
-
-
由 Timo Teräs 提交于
The NBMA GRE tunnels temporarily push GRE header that contain the per-packet NBMA destination on the skb via header ops early in xmit path. It is the later pulled before the real GRE header is constructed. The inner mac was thus set differently in nbma case: the GRE header has been pushed by neighbor layer, and mac header points to beginning of the temporary gre header (set by dev_queue_xmit). Now that the offloads expect mac header to point to the gre payload, fix the xmit patch to: - pull first the temporary gre header away - and reset mac header to point to gre payload This fixes tso to work again with nbma tunnels. Fixes: 14051f04 ("gre: Use inner mac length when computing tunnel length") Signed-off-by: NTimo Teräs <timo.teras@iki.fi> Cc: Tom Herbert <therbert@google.com> Cc: Alexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 06 11月, 2014 1 次提交
-
-
由 Tom Herbert 提交于
When filling netlink info, dport is being returned as flags. Fix instances to return correct value. Signed-off-by: NTom Herbert <therbert@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 08 10月, 2014 1 次提交
-
-
由 Eric Dumazet 提交于
Testing xmit_more support with netperf and connected UDP sockets, I found strange dst refcount false sharing. Current handling of IFF_XMIT_DST_RELEASE is not optimal. Dropping dst in validate_xmit_skb() is certainly too late in case packet was queued by cpu X but dequeued by cpu Y The logical point to take care of drop/force is in __dev_queue_xmit() before even taking qdisc lock. As Julian Anastasov pointed out, need for skb_dst() might come from some packet schedulers or classifiers. This patch adds new helper to cleanly express needs of various drivers or qdiscs/classifiers. Drivers that need skb_dst() in their ndo_start_xmit() should call following helper in their setup instead of the prior : dev->priv_flags &= ~IFF_XMIT_DST_RELEASE; -> netif_keep_dst(dev); Instead of using a single bit, we use two bits, one being eventually rebuilt in bonding/team drivers. The other one, is permanent and blocks IFF_XMIT_DST_RELEASE being rebuilt in bonding/team. Eventually, we could add something smarter later. Signed-off-by: NEric Dumazet <edumazet@google.com> Cc: Julian Anastasov <ja@ssi.bg> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 02 10月, 2014 1 次提交
-
-
由 Tom Herbert 提交于
Call skb_set_inner_protocol to set inner Ethernet protocol to protocol being encapsulation by GRE before tunnel_xmit. This is needed for GSO if UDP encapsulation (fou) is being done. Signed-off-by: NTom Herbert <therbert@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 20 9月, 2014 1 次提交
-
-
由 Tom Herbert 提交于
Added netlink attrs to configure FOU encapsulation for GRE, netlink handling of these flags, and properly adjust MTU for encapsulation. ip_tunnel_encap is called from ip_tunnel_xmit to actually perform FOU encapsulation. Signed-off-by: NTom Herbert <therbert@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 11 6月, 2014 1 次提交
-
-
由 stephen hemminger 提交于
There is no need to require forcing device down on a Ethernet GRE (gretap) tunnel to change the MAC address. Signed-off-by: NStephen Hemminger <stephen@networkplumber.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 24 4月, 2014 1 次提交
-
-
由 Nicolas Dichtel 提交于
This patch allows to switch the netns when packet is encapsulated or decapsulated. In other word, the encapsulated packet is received in a netns, where the lookup is done to find the tunnel. Once the tunnel is found, the packet is decapsulated and injecting into the corresponding interface which stands to another netns. When one of the two netns is removed, the tunnel is destroyed. Signed-off-by: NNicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 13 4月, 2014 1 次提交
-
-
由 Nicolas Dichtel 提交于
Before the patch, it was possible to add two times the same tunnel: ip l a gre1 type gre remote 10.16.0.121 local 10.16.0.249 ip l a gre2 type gre remote 10.16.0.121 local 10.16.0.249 It was possible, because ip_tunnel_newlink() calls ip_tunnel_find() with the argument dev->type, which was set only later (when calling ndo_init handler in register_netdevice()). Let's set this type in the setup handler, which is called before newlink handler. Introduced by commit c5441932 ("GRE: Refactor GRE tunneling code."). CC: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: NNicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 28 1月, 2014 1 次提交
-
-
由 Duan Jiong 提交于
When dealing with icmp messages, the skb->data points the ip header that triggered the sending of the icmp message. In gre_cisco_err(), the parse_gre_header() is called, and the iptunnel_pull_header() is called to pull the skb at the end of the parse_gre_header(), so the skb->data doesn't point the inner ip header. Unfortunately, the ipgre_err still needs those ip addresses in inner ip header to look up tunnel by ip_tunnel_lookup(). So just use icmp_hdr() to get inner ip header instead of skb->data. Signed-off-by: NDuan Jiong <duanj.fnst@cn.fujitsu.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 19 1月, 2014 1 次提交
-
-
由 Eric Dumazet 提交于
Replace some dev_kfree_skb() with kfree_skb() calls when we drop one skb, this might help bug tracking. Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 19 12月, 2013 1 次提交
-
-
由 Timo Teräs 提交于
ipgre_header_parse() needs to parse the tunnel's ip header and it uses mac_header to locate the iphdr. This got broken when gre tunneling was refactored as mac_header is no longer updated to point to iphdr. Introduce skb_pop_mac_header() helper to do the mac_header assignment and use it in ipgre_rcv() to fix msg_name parsing. Bug introduced in commit c5441932 (GRE: Refactor GRE tunneling code.) Cc: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: NTimo Teräs <timo.teras@iki.fi> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 15 8月, 2013 1 次提交
-
-
由 Nicolas Dichtel 提交于
This patch allows to switch the netns when packet is encapsulated or decapsulated. In other word, the encapsulated packet is received in a netns, where the lookup is done to find the tunnel. Once the tunnel is found, the packet is decapsulated and injecting into the corresponding interface which stands to another netns. When one of the two netns is removed, the tunnel is destroyed. Signed-off-by: NNicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 10 8月, 2013 1 次提交
-
-
由 Timo Teräs 提交于
Fix ipgre_header() (header_ops->create) to return the correct amount of bytes pushed. Most callers of dev_hard_header() seem to care only if it was success, but af_packet.c uses it as offset to the skb to copy from userspace only once. In practice this fixes packet socket sendto()/sendmsg() to gre tunnels. Regression introduced in c5441932 ("GRE: Refactor GRE tunneling code.") Cc: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: NTimo Teräs <timo.teras@iki.fi> Acked-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 02 7月, 2013 1 次提交
-
-
由 Cong Wang 提交于
When testing GRE tunnel, I got: # ip tunnel show get tunnel gre0 failed: Invalid argument get tunnel gre1 failed: Invalid argument This is a regression introduced by commit c5441932 ("GRE: Refactor GRE tunneling code.") because previously we only check the parameters for SIOCADDTUNNEL and SIOCCHGTUNNEL, after that commit, the check is moved for all commands. So, just check for SIOCADDTUNNEL and SIOCCHGTUNNEL. After this patch I got: # ip tunnel show gre0: gre/ip remote any local any ttl inherit nopmtudisc gre1: gre/ip remote 192.168.122.101 local 192.168.122.45 ttl inherit Cc: Pravin B Shelar <pshelar@nicira.com> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: NCong Wang <amwang@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 20 6月, 2013 3 次提交
-
-
由 Pravin B Shelar 提交于
This is required for OVS GRE offloading. Signed-off-by: NPravin B Shelar <pshelar@nicira.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pravin B Shelar 提交于
This is required for ovs gre module. Signed-off-by: NPravin B Shelar <pshelar@nicira.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pravin B Shelar 提交于
Currently there is only one user is allowed to register for gre protocol. Following patch adds de-multiplexer. So that multiple modules can listen on gre protocol e.g. kernel gre devices and ovs. Signed-off-by: NPravin B Shelar <pshelar@nicira.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 01 6月, 2013 1 次提交
-
-
由 Nicolas Dichtel 提交于
Before this patch, ip_tunnel_xmit() was using the field protocol from the IP header passed into argument. There is no functional change, this patch prepares the support of IPv4 over IPv4 for module sit. Signed-off-by: NNicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 20 5月, 2013 1 次提交
-
-
由 Eric Dumazet 提交于
Another fix needed in ipgre_err(), as parse_gre_header() might change skb->head. Bug added in commit c5441932 (GRE: Refactor GRE tunneling code.) Signed-off-by: NEric Dumazet <edumazet@google.com> Cc: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-