- 23 5月, 2019 6 次提交
-
-
由 Simon Sandström 提交于
Fixes checkpatch.pl error "else should follow close brace '}'" and "trailing statements should be on next line". Signed-off-by: NSimon Sandström <simon@nikanor.nu> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Simon Sandström 提交于
Fixes checkpatch.pl error "space required before the open brace '{'". Signed-off-by: NSimon Sandström <simon@nikanor.nu> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Simon Sandström 提交于
Use tabs instead of spaces for indentation. Signed-off-by: NSimon Sandström <simon@nikanor.nu> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Hariprasad Kelam 提交于
fix below warning reported by checkpatch CHECK: Comparison to NULL could be written "!precvpriv->pallocated_frame_buf" CHECK: Comparison to NULL could be written "padapter" Signed-off-by: NHariprasad Kelam <hariprasad.kelam@gmail.com> ----- changes in v2: Corected few erorrs like (!*psta == NULL) pointed in review Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 kbuild test robot 提交于
drivers/staging/kpc2000/kpc2000_i2c.c:652:3-8: No need to set .owner here. The core will do it. Remove .owner field if calls are used which set it automatically Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci Fixes: 43ad3819 ("staging: kpc2000: kpc_i2c: add static qual to local symbols in kpc_i2c.c") CC: Geordan Neukum <gneukum1@gmail.com> Signed-off-by: Nkbuild test robot <lkp@intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Hariprasad Kelam 提交于
As per below information GFP_KERNEL FLAG This is a normal allocation and might block. This is the flag to use in process context code when it is safe to sleep. GFP_ATOMIC FLAG The allocation is high-priority and does not sleep. This is the flag to use in interrupt handlers, bottom halves and other situations where you cannot sleep And we can take advantage of GFP_KERNEL , as when system is in low memory chances of getting success is high compared to GFP_ATOMIC. As visornic_probe is in process context we can use GPF_KERNEL. Signed-off-by: NHariprasad Kelam <hariprasad.kelam@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 22 5月, 2019 19 次提交
-
-
由 Geordan Neukum 提交于
kpc_i2c.c declares: - two functions - pi2c_probe() - pi2c_remove() - one struct - i2c_plat_driver_i which are local to the file, yet missing the static qualifier. Add the static qualifier to these symbols. Signed-off-by: NGeordan Neukum <gneukum1@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Geordan Neukum 提交于
Many of the functions in kpc_i2c log debug-level messages to the kernel log message buffer upon invocation. This is unnecessary, as debugging tools like kgdb, kdb, etc. or the tracing tool ftrace should be able to provide this same information. Therefore, remove these print statements. Signed-off-by: NGeordan Neukum <gneukum1@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Geordan Neukum 提交于
Rather than include asm/io.h, include linux/io.h. Issue reported by the script checkpatch.pl. Signed-off-by: NGeordan Neukum <gneukum1@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Geordan Neukum 提交于
The linux coding style document states: 1) That braces should not be used where a single single statement will do. Therefore all instances of single block statements wrapped in braces that do not meet the qualifications of any of the exceptions to the rule should be fixed up. 2) That the declaration of variables local to a given function should be immediately followed by a blank newline. Therefore, the single instance of this in kpc2000_i2c.c should be fixed up. Signed-off-by: NGeordan Neukum <gneukum1@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Geordan Neukum 提交于
The module parameter 'disable_features' is currently unused. Therefore, it should be removed. Signed-off-by: NGeordan Neukum <gneukum1@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Nathan Chancellor 提交于
Clang warns: drivers/staging/rtl8192u/ieee80211/ieee80211_softmac.c:2663:47: warning: address of array 'param->u.wpa_ie.data' will always evaluate to 'true' [-Wpointer-bool-conversion] (param->u.wpa_ie.len && !param->u.wpa_ie.data)) ~~~~~~~~~~~~~~~~~^~~~ This was exposed by commit deabe035 ("Staging: rtl8192u: ieee80211: Use !x in place of NULL comparisons") because we disable the warning that would have pointed out the comparison against NULL is also false: drivers/staging/rtl8192u/ieee80211/ieee80211_softmac.c:2663:46: warning: comparison of array 'param->u.wpa_ie.data' equal to a null pointer is always false [-Wtautological-pointer-compare] (param->u.wpa_ie.len && param->u.wpa_ie.data == NULL)) ~~~~~~~~~~~~~~~~^~~~ ~~~~ Remove it so clang no longer warns. Link: https://github.com/ClangBuiltLinux/linux/issues/487Signed-off-by: NNathan Chancellor <natechancellor@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Jeremy Sowden 提交于
All the attribute show call-backs check whether pcard is NULL. However, pci_set_drvdata(pdev, pcard) is called before the sysfs files are created during probe, and pci_set_drvdata(pdev, NULL) is not called until after they are destroyed during remove; therefore, pcard will not be NULL, and we can drop the checks. Signed-off-by: NJeremy Sowden <jeremy@azazel.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Jeremy Sowden 提交于
All the call-backs used the same formula to retrieve the pcard from dev: struct pci_dev *pdev = to_pci_dev(dev); struct kp2000_device *pcard; if (!pdev) return NULL; pcard = pci_get_drvdata(pdev); Since to_pci_dev is a wrapper for container_of, it will not return NULL, and since pci_get_drvdata just calls dev_get_drvdata on the dev member of pdev, this is equivalent to: struct kp2000_device *pcard = dev_get_drvdata(&(container_of(dev, struct pci_dev, dev)->dev)); and we can simplify it to: struct kp2000_device *pcard = dev_get_drvdata(dev); Signed-off-by: NJeremy Sowden <jeremy@azazel.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Jeremy Sowden 提交于
Previously the next card number was assigned from a static int local variable. Replaced it with an IDA. Avoids the assignment of ever- increasing card-numbers by allowing them to be reused. Updated TODO. Corrected format-specifier for unsigned pcard->card_num. Signed-off-by: NJeremy Sowden <jeremy@azazel.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Jeremy Sowden 提交于
staging: kpc2000: added separate show functions for readable kp device attributes, defined them as read-only, and declared them static. Defined separate simple show functions for each attribute instead of having a one big one containing a chain of conditionals. Replaced calls to scnprintf with sprintf since all the outputs are single integers. All the readable device attributes are read-only, so used DEVICE_ATTR_RO to define them. The definitions are only used to populate the kp_attr_list attribute array, so declared them as static. Fixes the following sparse warnings: drivers/staging/kpc2000/kpc2000/core.c:152:1: warning: symbol 'dev_attr_ssid' was not declared. Should it be static? drivers/staging/kpc2000/kpc2000/core.c:153:1: warning: symbol 'dev_attr_ddna' was not declared. Should it be static? drivers/staging/kpc2000/kpc2000/core.c:154:1: warning: symbol 'dev_attr_card_id' was not declared. Should it be static? drivers/staging/kpc2000/kpc2000/core.c:155:1: warning: symbol 'dev_attr_hw_rev' was not declared. Should it be static? drivers/staging/kpc2000/kpc2000/core.c:156:1: warning: symbol 'dev_attr_build' was not declared. Should it be static? drivers/staging/kpc2000/kpc2000/core.c:157:1: warning: symbol 'dev_attr_build_date' was not declared. Should it be static? drivers/staging/kpc2000/kpc2000/core.c:158:1: warning: symbol 'dev_attr_build_time' was not declared. Should it be static? drivers/staging/kpc2000/kpc2000/core.c:159:1: warning: symbol 'dev_attr_cpld_reg' was not declared. Should it be static? drivers/staging/kpc2000/kpc2000/core.c:161:1: warning: symbol 'dev_attr_cpld_reconfigure' was not declared. Should it be static? Signed-off-by: NJeremy Sowden <jeremy@azazel.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Jeremy Sowden 提交于
The attribute call-backs all use the same formula to get the pcard from dev: struct pci_dev *pdev = to_pci_dev(dev); struct kp2000_device *pcard; if (!pdev) return -ENXIO; pcard = pci_get_drvdata(pdev); if (!pcard) return -ENXIO; Added a function to reduce the duplicated code. Signed-off-by: NJeremy Sowden <jeremy@azazel.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Jeremy Sowden 提交于
* Indented with tabs. * Broke lines over 80 columns where possible. * Removed braces from one-statement blocks. * Tidied up some comments. * Removed multiple blank lines. Signed-off-by: NJeremy Sowden <jeremy@azazel.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Hans de Goede 提交于
Fix the following Coverity warning: File: drivers/staging/rtl8723bs/os_dep/ioctl_linux.c in function rtw_dbg_port(): CID 18480: Operands don't affect result (CONSTANT_EXPRESSION_RESULT) dead_error_condition: The condition (extra_arg & 7U) > 7U cannot be true. if ((extra_arg & 0x07) > 0x07) padapter->driver_ampdu_spacing = 0xFF; else padapter->driver_ampdu_spacing = extra_arg; Reported-by: NColin Ian King <colin.king@canonical.com> Signed-off-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Colin Ian King 提交于
The masking update of pkg_offset is redundant as the updated value is never read and pkg_offset is re-assigned on the next iteration of the loop. Clean this up by removing the redundant assignment. Addresses-Coverity: ("Unused value") Signed-off-by: NColin Ian King <colin.king@canonical.com> Reviewed-by: NAdham Abozaeid <adham.abozaeid@microchip.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Sven Van Asbroeck 提交于
The arcx-anybus's registers are accessed via a memory-mapped IO region. A regmap associated with this region is created using custom reg_read() / reg_write() callbacks. However, an abstraction which creates a memory-mapped IO region backed regmap already exists: devm_regmap_init_mmio(). Replace the custom regmap with the existing kernel abstraction. As a pleasant side-effect, sparse warnings now disappear. Signed-off-by: NSven Van Asbroeck <TheSven73@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Puranjay Mohan 提交于
Change (x == NULL) to !x and (x != NULL) to x, to fix following checkpatch.pl warnings: CHECK: Comparison to NULL could be written "!x". Signed-off-by: NPuranjay Mohan <puranjay12@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Puranjay Mohan 提交于
Change comparison to zero to !x. Replace (x == 0) to !x. Signed-off-by: NPuranjay Mohan <puranjay12@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Puranjay Mohan 提交于
Use "%s", __func__ in place of strings which contain function names. Signed-off-by: NPuranjay Mohan <puranjay12@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Puranjay Mohan 提交于
Remove functions which just print the name of function and return 0, These functions fake the network core to say that they support these options. Signed-off-by: NPuranjay Mohan <puranjay12@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 21 5月, 2019 15 次提交
-
-
由 Jeremy Sowden 提交于
The show functions of two attributes output nothing and they are unused. Removed them. Signed-off-by: NJeremy Sowden <jeremy@azazel.net> Reported-by: NMatt Sickler <matt.sickler@daktronics.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Jeremy Sowden 提交于
staging: kpc2000: added separate show functions for kpc_uio_class device attributes, defined them as read-only and declared them static. Defined separate simple show functions for each attribute instead of having a one big one containing a chain of conditionals. Replaced scnprintf calls with sprintf since all the outputs are short bounded strings or single integers. All of the device attributes are read-only, so used DEVICE_ATTR_RO to define them. The definitions are only used to populate the kpc_uio_class_attrs attribute array, so declared them as static. Fixes the following sparse warnings: drivers/staging/kpc2000/kpc2000/cell_probe.c:220:1: warning: symbol 'dev_attr_offset' was not declared. Should it be static? drivers/staging/kpc2000/kpc2000/cell_probe.c:221:1: warning: symbol 'dev_attr_size' was not declared. Should it be static? drivers/staging/kpc2000/kpc2000/cell_probe.c:222:1: warning: symbol 'dev_attr_type' was not declared. Should it be static? drivers/staging/kpc2000/kpc2000/cell_probe.c:223:1: warning: symbol 'dev_attr_s2c_dma' was not declared. Should it be static? drivers/staging/kpc2000/kpc2000/cell_probe.c:224:1: warning: symbol 'dev_attr_c2s_dma' was not declared. Should it be static? drivers/staging/kpc2000/kpc2000/cell_probe.c:225:1: warning: symbol 'dev_attr_irq_count' was not declared. Should it be static? drivers/staging/kpc2000/kpc2000/cell_probe.c:226:1: warning: symbol 'dev_attr_irq_base_num' was not declared. Should it be static? drivers/staging/kpc2000/kpc2000/cell_probe.c:227:1: warning: symbol 'dev_attr_core_num' was not declared. Should it be static? Signed-off-by: NJeremy Sowden <jeremy@azazel.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Nishka Dasgupta 提交于
Remove local variable psdio which is declared but not used (or returned) in its function. Issue found with Coccinelle. Signed-off-by: NNishka Dasgupta <nishka.dasgupta@yahoo.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Quentin Deslandes 提交于
Check for error during device initialization callback and return a meaningful error code or zero on success. Signed-off-by: NQuentin Deslandes <quentin.deslandes@itdev.co.uk> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Quentin Deslandes 提交于
Avoid discarding function's return code during register initialization. Handle it instead and return 0 on success or a negative errno value on error. Signed-off-by: NQuentin Deslandes <quentin.deslandes@itdev.co.uk> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Quentin Deslandes 提交于
Check on called function's returned value for error and return 0 on success or a negative errno value on error instead of a boolean value. Signed-off-by: NQuentin Deslandes <quentin.deslandes@itdev.co.uk> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Quentin Deslandes 提交于
Avoid discarding return value of functions called during firmware management process. Handle such return value and return 0 on success or a negative errno value on error. Signed-off-by: NQuentin Deslandes <quentin.deslandes@itdev.co.uk> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Quentin Deslandes 提交于
Change some of the driver's functions in order to handle error codes instead of discarding them. These function now returns 0 on success and a negative errno value on error. Signed-off-by: NQuentin Deslandes <quentin.deslandes@itdev.co.uk> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Quentin Deslandes 提交于
Avoid discarding called function's returned value. Store it instead in order to act accordingly. Update error path to return 0 on success and a negative errno value on error. Signed-off-by: NQuentin Deslandes <quentin.deslandes@itdev.co.uk> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Quentin Deslandes 提交于
vnt_free_tx_bufs() relies on priv->tx_context elements to be NULL if they are not initialized (as vnt_free_rx_bufs() does). Add a check to these elements in order to avoid NULL pointer dereference. Signed-off-by: NQuentin Deslandes <quentin.deslandes@itdev.co.uk> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Puranjay Mohan 提交于
Fix following checkpatch.pl warning by adding braces around if statement: CHECK: braces {} should be used on all arms of this statement Signed-off-by: NPuranjay Mohan <puranjay12@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Puranjay Mohan 提交于
Remove else after break statements to fix following checkpatch.pl warnings: WARNING: else is not generally useful after a break or return. Signed-off-by: NPuranjay Mohan <puranjay12@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Yannick Loeck 提交于
Fixes the misspelling of packet in <MASK_PACKETCONFIG1_PAKET_FORMAT_VARIABLE> Signed-off-by: NYannick Loeck <yannick.loeck@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Greg Kroah-Hartman 提交于
As this is only called twice, just call writel() like a normal driver should :) At the same time, clean up the formatting for the irq handler, as there is no need to have that be incorrect, it just hurts the eyes... Cc: Matt Sickler <Matt.Sickler@daktronics.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Greg Kroah-Hartman 提交于
The functions GetBackEndStatus() and BackEndControlSetClear() are never used by any code, so just remove them. Cc: Matt Sickler <Matt.Sickler@daktronics.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-