* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6:
  [NET] compat ifconf: fix limits

* master.kernel.org:/pub/scm/linux/kernel/git/mchehab/v4l-dvb:
  Merge branch 'work-fixes'
  V4L/DVB (3413): Typos grab bag of the month
  V4L/DVB (3403): Workaround to fix initialization for Nexus CA
  Merge branch 'work-fixes'
  V4L/DVB (3395): Fixed Pinnacle 300i DVB-T support
  V4L/DVB (3399): ELSA EX-VISION 500TV: fix incorrect PCI subsystem ID
  V4L/DVB (3382): Fix stv0297 for qam128 on tt c1500 (saa7146)
  V4L/DVB (3300a): Removing personal email from DVB maintainers
  V4L/DVB (3385): Dvb: fix __init/__exit section references in av7110 driver
  V4L/DVB (3378): Restore power on defaults of tda9887 after tda8290 probe
  V4L/DVB (3354): Fix maximum for the saturation and contrast controls.
  V4L/DVB (3352): Cxusb: fix lgdt3303 naming
  V4L/DVB (3348): Fixed saa7134 ALSA initialization with multiple cards
  V4L/DVB (3347): Pinnacle PCTV 40i: add filtered Composite2 input
  V4L/DVB (3341): Upstream sync - make 2 structs static
  V4L/DVB (3340): Make a struct static
  V4L/DVB (3337): Drivers/media/dvb/frontends/mt312.c: cleanups
  V4L/DVB (3336): Bt8xx documentation authors fix

A recent change to compat. dev_ifconf() in fs/compat_ioctl.c
causes ifconf data to be truncated 1 entry too early when copying it
to userspace.  The correct amount of data (length) is returned,
but the final entry is empty (zero, not filled in).
The for-loop 'i' check should use <= to allow the final struct
ifreq32 to be copied.  I also used the ifconf-corruption program
in kernel bugzilla #4746 to make sure that this change does not
re-introduce the corruption.
Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

While testing kexec and kdump we hit problems where the new kernel would
freeze or instantly reboot.  The easiest way to trigger it was to kexec a
kernel compiled for CONFIG_M586 on an athlon cpu.  Compiling for CONFIG_MK7
instead would work fine.

The patch fixes a few problems with the kexec inline asm.
Signed-off-by: NChris Mason <mason@suse.com>
Acked-by: N"Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NMatt Mackall <mpm@selenic.com>
Tested-by: NAnders K. Pedersen <akp@cohaesio.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

kmem_cache_init() incorrectly assumes that the cache_cache object will fit
in an order 0 allocation.  On very large systems, this is not true.  Change
the code to try larger order allocations if order 0 fails.
Signed-off-by: NJack Steiner <steiner@sgi.com>
Cc: Manfred Spraul <manfred@colorfullife.com>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Miscellaneous fixes related to accessing uninitialized variables or memory
that was already freed.
Signed-off-by: NLatchesar Ionkov <lucho@ionkov.net>
Cc: Eric Van Hensbergen <ericvh@ericvh.myip.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The x86_model calculation also applies for family 6. early_cpu_detect
does the right thing, but generic_identify misses.

Signed-off-by: Shaohua Li<shaohua.li@intel.com>
Cc: Dave Jones <davej@codemonkey.org.uk>
Cc: "Seth, Rohit" <rohit.seth@intel.com>
Acked-by: NAndi Kleen <ak@muc.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

DASD allows to open a device as soon as gendisk is registered, which means the
device is a fake device (capacity=0) and we do know nothing about blocksize
and partitions at that point of time.  In case the device is opened by
someone, the bdev and inode creation is done with the fake device info and the
following partition detection code is just using the wrong data.

To avoid this modify the DASD state machine to make sure that the open is
rejected until the device analysis is either finished or an unformatted device
was detected.
Signed-off-by: NHorst Hummel <horst.hummel@de.ibm.com>
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The message limit on the iucv connect call for the smsg module is too low.
Therefore increase the smsg message limit to 255.
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

strnlen_user is supposed to return then length count + 1 if no terminating \0
is found, and it should return 0 on exception.  Found by David Howells
<dhowells@redhat.com>.
Signed-off-by: NGerald Schaefer <geraldsc@de.ibm.com>
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Acked-By: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

I have benchmarked this on an x86_64 NUMA system and see no significant
performance difference on kernbench.  Tested on both x86_64 and powerpc.

The way we do file struct accounting is not very suitable for batched
freeing.  For scalability reasons, file accounting was
constructor/destructor based.  This meant that nr_files was decremented
only when the object was removed from the slab cache.  This is susceptible
to slab fragmentation.  With RCU based file structure, consequent batched
freeing and a test program like Serge's, we just speed this up and end up
with a very fragmented slab -

llm22:~ # cat /proc/sys/fs/file-nr
587730  0       758844

At the same time, I see only a 2000+ objects in filp cache.  The following
patch I fixes this problem.

This patch changes the file counting by removing the filp_count_lock.
Instead we use a separate percpu counter, nr_files, for now and all
accesses to it are through get_nr_files() api.  In the sysctl handler for
nr_files, we populate files_stat.nr_files before returning to user.

Counting files as an when they are created and destroyed (as opposed to
inside slab) allows us to correctly count open files with RCU.
Signed-off-by: NDipankar Sarma <dipankar@in.ibm.com>
Cc: "Paul E. McKenney" <paulmck@us.ibm.com>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch adds new tunables for RCU queue and finished batches.  There are
two types of controls - number of completed RCU updates invoked in a batch
(blimit) and monitoring for high rate of incoming RCUs on a cpu (qhimark,
qlowmark).

By default, the per-cpu batch limit is set to a small value.  If the input
RCU rate exceeds the high watermark, we do two things - force quiescent
state on all cpus and set the batch limit of the CPU to INTMAX.  Setting
batch limit to INTMAX forces all finished RCUs to be processed in one shot.
 If we have more than INTMAX RCUs queued up, then we have bigger problems
anyway.  Once the incoming queued RCUs fall below the low watermark, the
batch limit is set to the default.
Signed-off-by: NDipankar Sarma <dipankar@in.ibm.com>
Cc: "Paul E. McKenney" <paulmck@us.ibm.com>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Implement percpu_counter_sum().  This is a more accurate but slower version of
percpu_counter_read_positive().

We need this for Alex's speedup-ext3_statfs patch and for the nr_file
accounting fix.  Otherwise these things would be too inaccurate on large CPU
counts.

Cc: Ravikiran G Thirumalai <kiran@scalex86.org>
Cc: Alex Tomas <alex@clusterfs.com>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Fix i386 nmi_watchdog that does not meet watchdog timeout condition.  It
does not hit die_nmi when it should be triggered, because the current
nmi_watchdog_tick in arch/i386/kernel/nmi.c never count up alert_counter
like this:

	void nmi_watchdog_tick (struct pt_regs * regs) {
	if (last_irq_sums[cpu] == sum) {
		alert_counter[cpu]++;		<- count up alert_counter, but
		if (alert_counter[cpu] == 5*nmi_hz)
			die_nmi(regs, "NMI Watchdog detected LOCKUP");
		alert_counter[cpu] = 0;		<- reset alert_counter

This patch changes it back to the previous and working version.

This was found and originally written by Kohta NAKASHIMA.

(akpm: also uninline write_watchdog_counter(), saving 184 byets)
Signed-off-by: NGOTO Masanori <gotom@sanori.org>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

If the 'ptr' is a const, this code cause "assignment of read-only variable"
error on gcc 4.x.

Use __u64 instead of __typeof__(*(ptr)) for temporary variable to get
rid of errors on gcc 4.x.
Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Idle threads should have a sane ->timestamp value, to avoid init kernel
thread(s) from inheriting it and causing miscalculations in
try_to_wake_up().

Reported-by: Mike Galbraith <efault@gmx.de>.
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Fix a bug in udf where it would write uid/gid = 0 to the disk for files
owned by the id given with the uid=/gid= mount options.  It also adds 4 new
mount options: uid/gid=forget and uid/gid=ignore.  Without any options the
id in core and on disk always match.  Giving uid/gid=nnn specifies a
default ID to be used in core when the on disk ID is -1.  uid/gid=ignore
forces the in core ID to allways be used no matter what the on disk ID is.
uid/gid=forget forces the on disk ID to always be written out as -1.

The use of these options allows you to override ownerships on a disk or
disable ownwership information from being written, allowing the media to be
used portably between different computers and possibly different users
without permissions issues that would require root to correct.
Signed-off-by: NPhillip Susi <psusi@cfl.rr.com>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Fix the mm/mempolicy.c build for !CONFIG_HUGETLB_PAGE.

Cc: Christoph Lameter <clameter@engr.sgi.com>
Cc: Martin Bligh <mbligh@google.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

We're presently getting oopses because Bluetooth (and possibly other) drivers
are calling core functions after things have been shut down.

So rather than oopsing, let's drop a warning then take avoiding action, so the
machine survives.  Once all the sub-drivers are fixed up we can remove the
take-avoiding-action part.
Signed-off-by: NPavel Machek <pavel@suse.cz>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

We fixed this:

arch/powerpc/platforms/pseries/eeh.c: In function `eeh_add_device_tree_late':
arch/powerpc/platforms/pseries/eeh.c:901: warning: implicit declaration of function `eeh_add_device_late'
arch/powerpc/platforms/pseries/eeh.c: At top level:
arch/powerpc/platforms/pseries/eeh.c:918: error: conflicting types for 'eeh_add_device_late'
arch/powerpc/platforms/pseries/eeh.c:901: error: previous implicit declaration of 'eeh_add_device_late' was here
make[2]: *** [arch/powerpc/platforms/pseries/eeh.o] Error 1

But we forgot the !CONFIG_EEH stub.
Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

They aren't used (nor even really usable) outside of pipe.c anyway
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6:
  [IA64] mca recovery return value when no bus check
  [IA64] SGI SN drivers: don't report !sn2 hardware as an error
  [IA64] don't report !sn2 or !summit hardware as an error
  [IA64] gensparse_defconfig: turn on PNPACPI
  [IA64] Increase severity of MCA recovery messages

Instead of having a hard-to-read and confusing conditional in the
caller, just make the slab order calculation handle this special case,
since it's simple and obvious there.
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Typos grab bag of the month.
Eyeballed by jmc@ in OpenBSD.
Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: NOliver Endriss <o.endriss@gmx.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Workaround for Nexus CA: Debi test fails unless first debi write is repeated.
Signed-off-by: NMarco Schluessler <marco@lordzodiac.de>
Signed-off-by: NOliver Endriss <o.endriss@gmx.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

* master.kernel.org:/home/rmk/linux-2.6-serial:
  [SERIAL] ip22zilog: Fix oops on runlevel change with serial console
  [SERIAL] Fix two bugs in parport_serial

* master.kernel.org:/home/rmk/linux-2.6-arm:
  [ARM] 3353/1: NAS100d: protect  nas100d_power_exit() with machine_is_nas100d()
  [ARM] 3352/1: DSB required for the completion of a TLB maintenance operation

When there is no bus check, the return code should be failure, not success.

Signed-off-by: Russ Anderson (rja@sgi.com)
Signed-off-by: NTony Luck <tony.luck@intel.com>

This stuff is all in the generic ia64 kernel, and the new initcall error
reporting complains about them.
Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: NTony Luck <tony.luck@intel.com>

This stuff is all in the generic ia64 kernel, and the new initcall error
reporting complains about them.
Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: NTony Luck <tony.luck@intel.com>

Turn on CONFIG_PNPACPI.  I recently removed 8250_acpi.c.  All devices
previously claimed by 8250_acpi.c should now be claimed by 8250_pnp.c.
This depends on having CONFIG_PNPACPI so ACPI devices show up as PNP
devices.

All other ia64 defconfigs either have CONFIG_PNPACPI already, or
don't have 8250 support turned on at all.
Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: NTony Luck <tony.luck@intel.com>

The MCA recovery messages are currently KERN_DEBUG,
so they don't show up in /var/log/messages (by default).
Increase the severity to KERN_ERR, for the initial
message (and also add the physical address to this
message). Leave the successful isolation message as
KERN_DEBUG, but increase the severity when isolation
fails to KERN_CRIT.

[Russ' patch made these all KERN_CRIT]

Signed-off-by: Russ Anderson (rja@sgi.com)
Signed-off-by: NTony Luck <tony.luck@intel.com>

The size of the skb carrying the netlink message is not
equivalent to the length of the actual netlink message
due to padding. ip_queue matches the length of the payload
against the original packet size to determine if packet
mangling is desired, due to the above wrong assumption
arbitary packets may not be mangled depening on their
original size.
Signed-off-by: NThomas Graf <tgraf@suug.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Patch from Alessandro Zummo

nas100d_power_exit(void) gets some protection
to avoid freeing an irq when it is not appropriate to do so.
Signed-off-by: NRod Whitby <rod@whitby.id.au>
Signed-off-by: NAlessandro Zummo <a.zummo@towertech.it>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Incorrect uart_write_wakeup() calls cause reference to a NULL tty
pointer.  This has been fixed in the sunsab and sunzilog serial drivers
in October 2005.  Update the ip22zilog, which is based on sunzilog,
accordingly.
Signed-off-by: NMartin Michlmayr <tbm@cyrius.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk

* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6:
  [TG3]: Add DMA address workaround

We don't do interruptible waits for the pipe mutex anywhere else any
more either, so don't do it in fifo_open() either.
Acked-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>