提交 7a2fe8c4 编写于 作者: L Linus Torvalds

Merge master.kernel.org:/pub/scm/linux/kernel/git/mchehab/v4l-dvb

* master.kernel.org:/pub/scm/linux/kernel/git/mchehab/v4l-dvb:
  Merge branch 'work-fixes'
  V4L/DVB (3413): Typos grab bag of the month
  V4L/DVB (3403): Workaround to fix initialization for Nexus CA
  Merge branch 'work-fixes'
  V4L/DVB (3395): Fixed Pinnacle 300i DVB-T support
  V4L/DVB (3399): ELSA EX-VISION 500TV: fix incorrect PCI subsystem ID
  V4L/DVB (3382): Fix stv0297 for qam128 on tt c1500 (saa7146)
  V4L/DVB (3300a): Removing personal email from DVB maintainers
  V4L/DVB (3385): Dvb: fix __init/__exit section references in av7110 driver
  V4L/DVB (3378): Restore power on defaults of tda9887 after tda8290 probe
  V4L/DVB (3354): Fix maximum for the saturation and contrast controls.
  V4L/DVB (3352): Cxusb: fix lgdt3303 naming
  V4L/DVB (3348): Fixed saa7134 ALSA initialization with multiple cards
  V4L/DVB (3347): Pinnacle PCTV 40i: add filtered Composite2 input
  V4L/DVB (3341): Upstream sync - make 2 structs static
  V4L/DVB (3340): Make a struct static
  V4L/DVB (3337): Drivers/media/dvb/frontends/mt312.c: cleanups
  V4L/DVB (3336): Bt8xx documentation authors fix
......@@ -111,4 +111,8 @@ source: linux/Documentation/video4linux/CARDLIST.bttv
If you have problems with this please do ask on the mailing list.
--
Authors: Richard Walker, Jamie Honan, Michael Hunold, Manu Abraham
Authors: Richard Walker,
Jamie Honan,
Michael Hunold,
Manu Abraham,
Michael Krufky
......@@ -13,7 +13,7 @@
12 -> Medion 7134 [16be:0003]
13 -> Typhoon TV+Radio 90031
14 -> ELSA EX-VISION 300TV [1048:226b]
15 -> ELSA EX-VISION 500TV [1048:226b]
15 -> ELSA EX-VISION 500TV [1048:226a]
16 -> ASUS TV-FM 7134 [1043:4842,1043:4830,1043:4840]
17 -> AOPEN VA1000 POWER [1131:7133]
18 -> BMK MPEX No Tuner
......@@ -75,7 +75,7 @@
74 -> LifeView FlyTV Platinum Mini2 [14c0:1212]
75 -> AVerMedia AVerTVHD MCE A180 [1461:1044]
76 -> SKNet MonsterTV Mobile [1131:4ee9]
77 -> Pinnacle PCTV 110i (saa7133) [11bd:002e]
77 -> Pinnacle PCTV 40i/50i/110i (saa7133) [11bd:002e]
78 -> ASUSTeK P7131 Dual [1043:4862]
79 -> Sedna/MuchTV PC TV Cardbus TV/Radio (ITO25 Rev:2B)
80 -> ASUS Digimatrix TV [1043:0210]
......
......@@ -838,7 +838,6 @@ S: Maintained
DVB SUBSYSTEM AND DRIVERS
P: LinuxTV.org Project
M: mchehab@infradead.org
M: v4l-dvb-maintainer@linuxtv.org
L: linux-dvb@linuxtv.org (subscription required)
W: http://linuxtv.org/
......
......@@ -526,7 +526,7 @@ int flexcop_frontend_init(struct flexcop_device *fc)
info("found the stv0297 at i2c address: 0x%02x",alps_tdee4_stv0297_config.demod_address);
} else
/* try the sky v2.3 (vp310/Samsung tbdu18132(tsa5059)) */
if ((fc->fe = vp310_attach(&skystar23_samsung_tbdu18132_config, &fc->i2c_adap)) != NULL) {
if ((fc->fe = vp310_mt312_attach(&skystar23_samsung_tbdu18132_config, &fc->i2c_adap)) != NULL) {
ops = fc->fe->ops;
ops->diseqc_send_master_cmd = flexcop_diseqc_send_master_cmd;
......
......@@ -382,7 +382,7 @@ bt878_device_control(struct bt878 *bt, unsigned int cmd, union dst_gpio_packet *
EXPORT_SYMBOL(bt878_device_control);
struct cards card_list[] __devinitdata = {
static struct cards card_list[] __devinitdata = {
{ 0x01010071, BTTV_BOARD_NEBULA_DIGITV, "Nebula Electronics DigiTV" },
{ 0x07611461, BTTV_BOARD_AVDVBT_761, "AverMedia AverTV DVB-T 761" },
......
......@@ -602,7 +602,7 @@ static int dst_type_print(u8 type)
*/
struct dst_types dst_tlist[] = {
static struct dst_types dst_tlist[] = {
{
.device_id = "200103A",
.offset = 0,
......
......@@ -216,7 +216,7 @@ struct dmx_frontend {
/*--------------------------------------------------------------------------*/
/*
* Flags OR'ed in the capabilites field of struct dmx_demux.
* Flags OR'ed in the capabilities field of struct dmx_demux.
*/
#define DMX_TS_FILTERING 1
......
......@@ -282,7 +282,7 @@ static struct cx22702_config cxusb_cx22702_config = {
.pll_set = dvb_usb_pll_set_i2c,
};
static struct lgdt330x_config cxusb_lgdt330x_config = {
static struct lgdt330x_config cxusb_lgdt3303_config = {
.demod_address = 0x0e,
.demod_chip = LGDT3303,
.pll_set = dvb_usb_pll_set_i2c,
......@@ -357,14 +357,14 @@ static int cxusb_cx22702_frontend_attach(struct dvb_usb_device *d)
return -EIO;
}
static int cxusb_lgdt330x_frontend_attach(struct dvb_usb_device *d)
static int cxusb_lgdt3303_frontend_attach(struct dvb_usb_device *d)
{
if (usb_set_interface(d->udev,0,7) < 0)
err("set interface failed");
cxusb_ctrl_msg(d,CMD_DIGITAL, NULL, 0, NULL, 0);
if ((d->fe = lgdt330x_attach(&cxusb_lgdt330x_config, &d->i2c_adap)) != NULL)
if ((d->fe = lgdt330x_attach(&cxusb_lgdt3303_config, &d->i2c_adap)) != NULL)
return 0;
return -EIO;
......@@ -506,7 +506,7 @@ static struct dvb_usb_properties cxusb_bluebird_lgh064f_properties = {
.streaming_ctrl = cxusb_streaming_ctrl,
.power_ctrl = cxusb_power_ctrl,
.frontend_attach = cxusb_lgdt330x_frontend_attach,
.frontend_attach = cxusb_lgdt3303_frontend_attach,
.tuner_attach = cxusb_lgh064f_tuner_attach,
.i2c_algo = &cxusb_i2c_algo,
......
......@@ -47,7 +47,7 @@ static int dvb_usb_init(struct dvb_usb_device *d)
d->state = DVB_USB_STATE_INIT;
/* check the capabilites and set appropriate variables */
/* check the capabilities and set appropriate variables */
/* speed - when running at FULL speed we need a HW PID filter */
if (d->udev->speed == USB_SPEED_FULL && !(d->props.caps & DVB_USB_HAS_PID_FILTER)) {
......
......@@ -87,7 +87,7 @@ struct dvb_usb_device;
/**
* struct dvb_usb_properties - properties of a dvb-usb-device
* @caps: capabilites of the DVB USB device.
* @caps: capabilities of the DVB USB device.
* @pid_filter_count: number of PID filter position in the optional hardware
* PID-filter.
*
......
......@@ -29,7 +29,7 @@ config DVB_TDA8083
A DVB-S tuner module. Say Y when you want to support this frontend.
config DVB_MT312
tristate "Zarlink MT312 based"
tristate "Zarlink VP310/MT312 based"
depends on DVB_CORE
help
A DVB-S tuner module. Say Y when you want to support this frontend.
......
......@@ -612,76 +612,6 @@ static void mt312_release(struct dvb_frontend* fe)
kfree(state);
}
static struct dvb_frontend_ops vp310_mt312_ops;
struct dvb_frontend* vp310_attach(const struct mt312_config* config,
struct i2c_adapter* i2c)
{
struct mt312_state* state = NULL;
/* allocate memory for the internal state */
state = kmalloc(sizeof(struct mt312_state), GFP_KERNEL);
if (state == NULL)
goto error;
/* setup the state */
state->config = config;
state->i2c = i2c;
memcpy(&state->ops, &vp310_mt312_ops, sizeof(struct dvb_frontend_ops));
strcpy(state->ops.info.name, "Zarlink VP310 DVB-S");
/* check if the demod is there */
if (mt312_readreg(state, ID, &state->id) < 0)
goto error;
if (state->id != ID_VP310) {
goto error;
}
/* create dvb_frontend */
state->frequency = 90;
state->frontend.ops = &state->ops;
state->frontend.demodulator_priv = state;
return &state->frontend;
error:
kfree(state);
return NULL;
}
struct dvb_frontend* mt312_attach(const struct mt312_config* config,
struct i2c_adapter* i2c)
{
struct mt312_state* state = NULL;
/* allocate memory for the internal state */
state = kmalloc(sizeof(struct mt312_state), GFP_KERNEL);
if (state == NULL)
goto error;
/* setup the state */
state->config = config;
state->i2c = i2c;
memcpy(&state->ops, &vp310_mt312_ops, sizeof(struct dvb_frontend_ops));
strcpy(state->ops.info.name, "Zarlink MT312 DVB-S");
/* check if the demod is there */
if (mt312_readreg(state, ID, &state->id) < 0)
goto error;
if (state->id != ID_MT312) {
goto error;
}
/* create dvb_frontend */
state->frequency = 60;
state->frontend.ops = &state->ops;
state->frontend.demodulator_priv = state;
return &state->frontend;
error:
kfree(state);
return NULL;
}
static struct dvb_frontend_ops vp310_mt312_ops = {
.info = {
......@@ -720,6 +650,49 @@ static struct dvb_frontend_ops vp310_mt312_ops = {
.set_voltage = mt312_set_voltage,
};
struct dvb_frontend* vp310_mt312_attach(const struct mt312_config* config,
struct i2c_adapter* i2c)
{
struct mt312_state* state = NULL;
/* allocate memory for the internal state */
state = kmalloc(sizeof(struct mt312_state), GFP_KERNEL);
if (state == NULL)
goto error;
/* setup the state */
state->config = config;
state->i2c = i2c;
memcpy(&state->ops, &vp310_mt312_ops, sizeof(struct dvb_frontend_ops));
/* check if the demod is there */
if (mt312_readreg(state, ID, &state->id) < 0)
goto error;
switch (state->id) {
case ID_VP310:
strcpy(state->ops.info.name, "Zarlink VP310 DVB-S");
state->frequency = 90;
break;
case ID_MT312:
strcpy(state->ops.info.name, "Zarlink MT312 DVB-S");
state->frequency = 60;
break;
default:
printk (KERN_WARNING "Only Zarlink VP310/MT312 are supported chips.\n");
goto error;
}
/* create dvb_frontend */
state->frontend.ops = &state->ops;
state->frontend.demodulator_priv = state;
return &state->frontend;
error:
kfree(state);
return NULL;
}
module_param(debug, int, 0644);
MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off).");
......@@ -727,5 +700,4 @@ MODULE_DESCRIPTION("Zarlink VP310/MT312 DVB-S Demodulator driver");
MODULE_AUTHOR("Andreas Oberritter <obi@linuxtv.org>");
MODULE_LICENSE("GPL");
EXPORT_SYMBOL(mt312_attach);
EXPORT_SYMBOL(vp310_attach);
EXPORT_SYMBOL(vp310_mt312_attach);
......@@ -38,10 +38,8 @@ struct mt312_config
int (*pll_set)(struct dvb_frontend* fe, struct dvb_frontend_parameters* params);
};
extern struct dvb_frontend* mt312_attach(const struct mt312_config* config,
struct i2c_adapter* i2c);
struct dvb_frontend* vp310_mt312_attach(const struct mt312_config* config,
struct i2c_adapter* i2c);
extern struct dvb_frontend* vp310_attach(const struct mt312_config* config,
struct i2c_adapter* i2c);
#endif // MT312_H
......@@ -393,10 +393,6 @@ static int stv0297_set_frontend(struct dvb_frontend *fe, struct dvb_frontend_par
break;
case QAM_128:
delay = 150;
sweeprate = 1000;
break;
case QAM_256:
delay = 200;
sweeprate = 500;
......
......@@ -1439,7 +1439,7 @@ static int check_firmware(struct av7110* av7110)
len = ntohl(*(u32*) ptr);
ptr += 4;
if (len >= 512) {
printk("dvb-ttpci: dpram file is way to big.\n");
printk("dvb-ttpci: dpram file is way too big.\n");
return -EINVAL;
}
if (crc != crc32_le(0, ptr, len)) {
......@@ -2477,7 +2477,8 @@ static int frontend_init(struct av7110 *av7110)
* The same behaviour of missing VSYNC can be duplicated on budget
* cards, by seting DD1_INIT trigger mode 7 in 3rd nibble.
*/
static int av7110_attach(struct saa7146_dev* dev, struct saa7146_pci_extension_data *pci_ext)
static int __devinit av7110_attach(struct saa7146_dev* dev,
struct saa7146_pci_extension_data *pci_ext)
{
const int length = TS_WIDTH * TS_HEIGHT;
struct pci_dev *pdev = dev->pci;
......@@ -2827,7 +2828,7 @@ static int av7110_attach(struct saa7146_dev* dev, struct saa7146_pci_extension_d
goto out;
}
static int av7110_detach(struct saa7146_dev* saa)
static int __devexit av7110_detach(struct saa7146_dev* saa)
{
struct av7110 *av7110 = saa->ext_priv;
dprintk(4, "%p\n", av7110);
......@@ -2974,7 +2975,7 @@ static struct saa7146_extension av7110_extension = {
.module = THIS_MODULE,
.pci_tbl = &pci_tbl[0],
.attach = av7110_attach,
.detach = av7110_detach,
.detach = __devexit_p(av7110_detach),
.irq_mask = MASK_19 | MASK_03 | MASK_10,
.irq_func = av7110_irq,
......
......@@ -245,6 +245,9 @@ int av7110_bootarm(struct av7110 *av7110)
/* test DEBI */
iwdebi(av7110, DEBISWAP, DPRAM_BASE, 0x76543210, 4);
/* FIXME: Why does Nexus CA require 2x iwdebi for first init? */
iwdebi(av7110, DEBISWAP, DPRAM_BASE, 0x76543210, 4);
if ((ret=irdebi(av7110, DEBINOSWAP, DPRAM_BASE, 0, 4)) != 0x10325476) {
printk(KERN_ERR "dvb-ttpci: debi test in av7110_bootarm() failed: "
"%08x != %08x (check your BIOS 'Plug&Play OS' settings)\n",
......
......@@ -208,7 +208,7 @@ static void ir_handler(struct av7110 *av7110, u32 ircom)
}
int __init av7110_ir_init(struct av7110 *av7110)
int __devinit av7110_ir_init(struct av7110 *av7110)
{
static struct proc_dir_entry *e;
......@@ -248,7 +248,7 @@ int __init av7110_ir_init(struct av7110 *av7110)
}
void __exit av7110_ir_exit(struct av7110 *av7110)
void __devexit av7110_ir_exit(struct av7110 *av7110)
{
int i;
......
......@@ -3369,7 +3369,7 @@ static int cpia_do_ioctl(struct inode *inode, struct file *file,
//DBG("cpia_ioctl: %u\n", ioctlnr);
switch (ioctlnr) {
/* query capabilites */
/* query capabilities */
case VIDIOCGCAP:
{
struct video_capability *b = arg;
......
......@@ -567,7 +567,7 @@ static struct v4l2_queryctrl cx25840_qctrl[] = {
.type = V4L2_CTRL_TYPE_INTEGER,
.name = "Contrast",
.minimum = 0,
.maximum = 255,
.maximum = 127,
.step = 1,
.default_value = 64,
.flags = 0,
......@@ -576,7 +576,7 @@ static struct v4l2_queryctrl cx25840_qctrl[] = {
.type = V4L2_CTRL_TYPE_INTEGER,
.name = "Saturation",
.minimum = 0,
.maximum = 255,
.maximum = 127,
.step = 1,
.default_value = 64,
.flags = 0,
......
......@@ -1027,7 +1027,7 @@ static struct v4l2_queryctrl saa7115_qctrl[] = {
.type = V4L2_CTRL_TYPE_INTEGER,
.name = "Contrast",
.minimum = 0,
.maximum = 255,
.maximum = 127,
.step = 1,
.default_value = 64,
.flags = 0,
......@@ -1036,7 +1036,7 @@ static struct v4l2_queryctrl saa7115_qctrl[] = {
.type = V4L2_CTRL_TYPE_INTEGER,
.name = "Saturation",
.minimum = 0,
.maximum = 255,
.maximum = 127,
.step = 1,
.default_value = 64,
.flags = 0,
......
......@@ -54,10 +54,12 @@ MODULE_PARM_DESC(debug,"enable debug messages [alsa]");
static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX; /* Index 0-MAX */
static char *id[SNDRV_CARDS] = SNDRV_DEFAULT_STR; /* ID for this card */
static int enable[SNDRV_CARDS] = {1, [1 ... (SNDRV_CARDS - 1)] = 0};
static int enable[SNDRV_CARDS] = {1, [1 ... (SNDRV_CARDS - 1)] = 1};
module_param_array(index, int, NULL, 0444);
module_param_array(enable, int, NULL, 0444);
MODULE_PARM_DESC(index, "Index value for SAA7134 capture interface(s).");
MODULE_PARM_DESC(enable, "Enable (or not) the SAA7134 capture interface(s).");
#define dprintk(fmt, arg...) if (debug) \
printk(KERN_DEBUG "%s/alsa: " fmt, dev->name , ##arg)
......
......@@ -977,7 +977,7 @@ struct saa7134_board saa7134_boards[] = {
.radio_type = UNSET,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
.tda9887_conf = TDA9887_PRESENT | TDA9887_INTERCARRIER | TDA9887_PORT2_ACTIVE,
.tda9887_conf = TDA9887_PRESENT | TDA9887_INTERCARRIER | TDA9887_PORT2_INACTIVE,
.inputs = {{
.name = name_tv,
.vmux = 3,
......@@ -1666,7 +1666,7 @@ struct saa7134_board saa7134_boards[] = {
.radio_type = UNSET,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
.tda9887_conf = TDA9887_PRESENT | TDA9887_INTERCARRIER | TDA9887_PORT2_ACTIVE,
.tda9887_conf = TDA9887_PRESENT | TDA9887_INTERCARRIER | TDA9887_PORT2_INACTIVE,
.mpeg = SAA7134_MPEG_DVB,
.inputs = {{
.name = name_tv,
......@@ -2187,7 +2187,7 @@ struct saa7134_board saa7134_boards[] = {
.radio_type = UNSET,
.tuner_addr = 0x61,
.radio_addr = ADDR_UNSET,
.tda9887_conf = TDA9887_PRESENT,
.tda9887_conf = TDA9887_PRESENT | TDA9887_PORT1_ACTIVE,
.mpeg = SAA7134_MPEG_DVB,
.inputs = {{
.name = name_tv,
......@@ -2211,7 +2211,7 @@ struct saa7134_board saa7134_boards[] = {
.radio_type = UNSET,
.tuner_addr = 0x61,
.radio_addr = ADDR_UNSET,
.tda9887_conf = TDA9887_PRESENT,
.tda9887_conf = TDA9887_PRESENT | TDA9887_PORT1_ACTIVE,
.mpeg = SAA7134_MPEG_DVB,
.inputs = {{
.name = name_tv,
......@@ -2392,7 +2392,7 @@ struct saa7134_board saa7134_boards[] = {
}},
},
[SAA7134_BOARD_PINNACLE_PCTV_110i] = {
.name = "Pinnacle PCTV 110i (saa7133)",
.name = "Pinnacle PCTV 40i/50i/110i (saa7133)",
.audio_clock = 0x00187de7,
.tuner_type = TUNER_PHILIPS_TDA8290,
.radio_type = UNSET,
......@@ -2407,6 +2407,10 @@ struct saa7134_board saa7134_boards[] = {
},{
.name = name_comp1,
.vmux = 1,
.amux = LINE2,
},{
.name = name_comp2,
.vmux = 0,
.amux = LINE2,
},{
.name = name_svideo,
......@@ -2745,7 +2749,7 @@ struct pci_device_id saa7134_pci_tbl[] = {
.vendor = PCI_VENDOR_ID_PHILIPS,
.device = PCI_DEVICE_ID_PHILIPS_SAA7130,
.subvendor = 0x1048,
.subdevice = 0x226b,
.subdevice = 0x226a,
.driver_data = SAA7134_BOARD_ELSA_500TV,
},{
.vendor = PCI_VENDOR_ID_PHILIPS,
......@@ -3201,6 +3205,11 @@ int saa7134_board_init1(struct saa7134_dev *dev)
/* power-up tuner chip */
saa_andorl(SAA7134_GPIO_GPMODE0 >> 2, 0x00040000, 0x00040000);
saa_andorl(SAA7134_GPIO_GPSTATUS0 >> 2, 0x00040000, 0x00000000);
case SAA7134_BOARD_PINNACLE_300I_DVBT_PAL:
/* this turns the remote control chip off to work around a bug in it */
saa_writeb(SAA7134_GPIO_GPMODE1, 0x80);
saa_writeb(SAA7134_GPIO_GPSTATUS1, 0x80);
break;
case SAA7134_BOARD_MONSTERTV_MOBILE:
/* power-up tuner chip */
saa_andorl(SAA7134_GPIO_GPMODE0 >> 2, 0x00040000, 0x00040000);
......
......@@ -110,6 +110,7 @@ static int mt352_pinnacle_init(struct dvb_frontend* fe)
mt352_write(fe, fsm_ctl_cfg, sizeof(fsm_ctl_cfg));
mt352_write(fe, scan_ctl_cfg, sizeof(scan_ctl_cfg));
mt352_write(fe, irq_cfg, sizeof(irq_cfg));
return 0;
}
......@@ -117,8 +118,10 @@ static int mt352_pinnacle_pll_set(struct dvb_frontend* fe,
struct dvb_frontend_parameters* params,
u8* pllbuf)
{
static int on = TDA9887_PRESENT | TDA9887_PORT2_INACTIVE;
static int off = TDA9887_PRESENT | TDA9887_PORT2_ACTIVE;
u8 off[] = { 0x00, 0xf1};
u8 on[] = { 0x00, 0x71};
struct i2c_msg msg = {.addr=0x43, .flags=0, .buf=off, .len = sizeof(off)};
struct saa7134_dev *dev = fe->dvb->priv;
struct v4l2_frequency f;
......@@ -126,9 +129,10 @@ static int mt352_pinnacle_pll_set(struct dvb_frontend* fe,
f.tuner = 0;
f.type = V4L2_TUNER_DIGITAL_TV;
f.frequency = params->frequency / 1000 * 16 / 1000;
saa7134_i2c_call_clients(dev,TDA9887_SET_CONFIG,&on);
i2c_transfer(&dev->i2c_adap, &msg, 1);
saa7134_i2c_call_clients(dev,VIDIOC_S_FREQUENCY,&f);
saa7134_i2c_call_clients(dev,TDA9887_SET_CONFIG,&off);
msg.buf = on;
i2c_transfer(&dev->i2c_adap, &msg, 1);
pinnacle_antenna_pwr(dev, antenna_pwr);
......
......@@ -580,9 +580,10 @@ int tda8290_init(struct i2c_client *c)
int tda8290_probe(struct i2c_client *c)
{
unsigned char soft_reset[] = { 0x00, 0x00 };
unsigned char easy_mode_b[] = { 0x01, 0x02 };
unsigned char easy_mode_g[] = { 0x01, 0x04 };
unsigned char soft_reset[] = { 0x00, 0x00 };
unsigned char easy_mode_b[] = { 0x01, 0x02 };
unsigned char easy_mode_g[] = { 0x01, 0x04 };
unsigned char restore_9886[] = { 0x00, 0xd6, 0x30 };
unsigned char addr_dto_lsb = 0x07;
unsigned char data;
......@@ -599,6 +600,7 @@ int tda8290_probe(struct i2c_client *c)
return 0;
}
}
i2c_master_send(c, restore_9886, 3);
return -1;
}
......
......@@ -713,8 +713,9 @@ static int tuner_command(struct i2c_client *client, unsigned int cmd, void *arg)
struct v4l2_frequency *f = arg;
switch_v4l2();
if (V4L2_TUNER_RADIO == f->type &&
V4L2_TUNER_RADIO != t->mode) {
if ((V4L2_TUNER_RADIO == f->type && V4L2_TUNER_RADIO != t->mode)
|| (V4L2_TUNER_DIGITAL_TV == f->type
&& V4L2_TUNER_DIGITAL_TV != t->mode)) {
if (set_mode (client, t, f->type, "VIDIOC_S_FREQUENCY")
== EINVAL)
return 0;
......
......@@ -56,7 +56,7 @@
the slave is bound to it). Otherwise it doesn't need this functions and
therfor they may not be initialized.
The other fuctions are just for convenience, as they are for shure used by
The other fuctions are just for convenience, as they are for sure used by
most/all of the codecs. The last ones may be ommited, too.
See the structure declaration below for more information and which data has
......
......@@ -159,7 +159,7 @@ zr36050_wait_end (struct zr36050 *ptr)
while (!(zr36050_read_status1(ptr) & 0x4)) {
udelay(1);
if (i++ > 200000) { // 200ms, there is for shure something wrong!!!
if (i++ > 200000) { // 200ms, there is for sure something wrong!!!
dprintk(1,
"%s: timout at wait_end (last status: 0x%02x)\n",
ptr->name, ptr->status1);
......
......@@ -161,7 +161,7 @@ zr36060_wait_end (struct zr36060 *ptr)
while (zr36060_read_status(ptr) & ZR060_CFSR_Busy) {
udelay(1);
if (i++ > 200000) { // 200ms, there is for shure something wrong!!!
if (i++ > 200000) { // 200ms, there is for sure something wrong!!!
dprintk(1,
"%s: timout at wait_end (last status: 0x%02x)\n",
ptr->name, ptr->status);
......
......@@ -65,7 +65,7 @@ void attach_inform(struct i2c_bus *bus, int id)
case I2C_DRIVERID_VIDEODECODER:
DEBUG(printk(CARD_INFO "decoder attached\n",CARD));
/* fetch the capabilites of the decoder */
/* fetch the capabilities of the decoder */
rv = i2c_control_device(&ztv->i2c, I2C_DRIVERID_VIDEODECODER, DECODER_GET_CAPABILITIES, &dc);
if (rv) {
DEBUG(printk(CARD_DEBUG "decoder is not V4L aware!\n",CARD));
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册