- 03 8月, 2010 2 次提交
-
-
由 Krzysztof Hałasa 提交于
SBE 2T3E3 cards use DECchips 21143 but they need a different driver. Don't even try to use a normal tulip driver with them. Signed-off-by: NKrzysztof Hałasa <khc@pm.waw.pl> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Matt Carlson 提交于
These devices were never released to the public. Reviewed-by: NBenjamin Li <benli@broadcom.com> Reviewed-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NMatt Carlson <mcarlson@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 12 5月, 2010 1 次提交
-
-
由 Seth Heasley 提交于
This patch adds additional LPC Controller DeviceIDs for the Intel Cougar Point PCH. The DeviceIDs are defined and referenced as a range of values, the same way Ibex Peak was implemented. Signed-off-by: NSeth Heasley <seth.heasley@intel.com> Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
-
- 03 3月, 2010 2 次提交
-
-
由 Kiros Yeh 提交于
Add different model (with a different PCI ID) to support Korenix JetCard. Signed-off-by: NKiros Yeh <kiros@korenix.com> Acked-by: NAlan Cox <alan@linux.intel.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Ira W. Snyder 提交于
This patch is heavily based on an earlier patch found on the linux-serial mailing list [1], written by Darius Augulis. The previous incarnation of this patch only supported a 2x serial port card. I have added support for my SYBA 6x serial port card, and tested on x86. [1]: http://marc.info/?l=linux-serial&m=124975806304760Signed-off-by: NIra W. Snyder <iws@ovro.caltech.edu> Cc: Darius Augulis <augulis.darius@gmail.com> Cc: Greg KH <greg@kroah.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 25 2月, 2010 1 次提交
-
-
由 Stefan Richter 提交于
This code was no longer used since 2.6.33, "firewire: ohci: always use packet-per-buffer mode for isochronous reception" commit 090699c0. If anybody needs this code in the future for special purposes, it can be brought back in. But it must not be re-enabled by default; drivers (kernelspace or userspace drivers) should only get this mode if they explicitly request it. Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
- 23 2月, 2010 1 次提交
-
-
由 Seth Heasley 提交于
This patch adds the Intel Cougar Point (PCH) LPC and SMBus Controller DeviceIDs. Signed-off-by: NSeth Heasley <seth.heasley@intel.com> Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
-
- 05 12月, 2009 1 次提交
-
-
由 jack wang 提交于
This driver supports PMC-Sierra PCIe SAS/SATA 8x6G SPC 8001 chip based host adapters. Signed-off-by: NJack Wang <jack_wang@usish.com> Signed-off-by: NLindar Liu <lindar_liu@usish.com> Signed-off-by: NTom Peng <tom_peng@usish.com> Signed-off-by: NKevin Ao <aoqingyun@usish.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
- 04 12月, 2009 1 次提交
-
-
由 Alan Cox 提交于
We were never able to get docs for this out of Toshiba for years. Dave Barnes produced a NetBSD driver however and from that we can fill in the needed tables. As we correct the PCI identifiers a bit also update the old ide generic driver at the same time so it stays compiling. Signed-off-by: NAlan Cox <alan@linux.intel.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
- 21 11月, 2009 1 次提交
-
-
由 Kumar Gala 提交于
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
- 12 11月, 2009 1 次提交
-
-
由 Lennert Buytenhek 提交于
This seems to be a different model (with a different PCI ID) than the "Quatro" card that is also in the list. Signed-off-by: NLennert Buytenhek <buytenh@wantstofly.org> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 07 11月, 2009 1 次提交
-
-
由 Crane Cai 提交于
Change SB900 to its formal code name Hudson-2. Signed-off-by: NCrane Cai <crane.cai@amd.com> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
- 29 10月, 2009 2 次提交
-
-
由 Benjamin Herrenschmidt 提交于
The IBM Saturn serial card has only one port. Without that fixup, the kernel thinks it has two, which confuses userland setup and admin tools as well. [akpm@linux-foundation.org: fix pci-ids.h layout] Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: NAlan Cox <alan@linux.intel.com> Cc: Michael Reed <mreed10@us.ibm.com> Cc: <stable@kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Krauth.Julien 提交于
Add support for ADDI-DATA GmbH PCI-Express communication cards: APCIe-7300 APCIe-7420 APCIe-7500 APCIe-7800 Warning: 8250_pci.c depends on pci_ids.h. 8250_pci.c Signed-off-by: NKrauth Julien <Krauth.Julien@addi-data.com> Acked-by: NAlan Cox <alan@linux.intel.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 24 10月, 2009 1 次提交
-
-
由 Wolfram Sang 提交于
Out of 10 PCI_IDs found in the PCMCIA subsystem, only two were not defined in pci_ids.h. Move them and drop the duplicates. Successfully build-tested. Signed-off-by: NWolfram Sang <w.sang@pengutronix.de> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
- 16 10月, 2009 1 次提交
-
-
由 Shane Huang 提交于
This patch renames the code name SB900 into Hudson-2 Signed-off-by: NShane Huang <shane.huang@amd.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
- 08 10月, 2009 1 次提交
-
-
由 Gabe Black 提交于
This quirk will disable fast back to back transfer on the secondary bus segment of the TI Bridge. Signed-off-by: NGabe Black <gabe.black@ni.com> Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
-
- 19 9月, 2009 1 次提交
-
-
由 Crane Cai 提交于
Add new SMBus device ID for AMD SB900. Signed-off-by: NCrane Cai <crane.cai@amd.com> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
- 18 9月, 2009 1 次提交
-
-
由 John(Jung-Ik) Lee 提交于
This is a new pata driver for ARTOP 867X 64bit 4-channel UDMA133 ATA ctrls. Based on the Atp867 data sheet rev 1.2, Acard, and in part on early ide codes from Eric Uhrhane <ericu@google.com>. Signed-off-by: NJohn(Jung-Ik) Lee <jilee@google.com> Reviewed-by: NGrant Grundler <grundler@google.com> Reviewed-by: NGwendal Gringo <gwendal@google.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
- 11 9月, 2009 2 次提交
-
-
由 Otavio Salvador 提交于
Signed-off-by: NOtavio Salvador <otavio@ossystems.com.br> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Shane Huang 提交于
Add AMD SB900 SATA/IDE controller device IDs. Signed-off-by: NShane Huang <shane.huang@amd.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
- 10 9月, 2009 1 次提交
-
-
由 Dave Jones 提交于
IDs should generally only be added to pci_ids.h when they're shared across several files in the tree. IDs that are just used by a single driver should be defined in the driver instead. Perhaps documenting this is a good idea to prevent things being moved there, as it still seems to be happening judging from the git log. (based on discussion w/gregkh and others). Acked-by: NGreg Kroah-Hartman <gregkh@suse.de> Signed-off-by: NDave Jones <davej@redhat.com> Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
-
- 09 9月, 2009 1 次提交
-
-
由 Tom Picard 提交于
Jasper Forest introduces raid offload support via ioat3.2 support. When raid offload is enabled two (out of 8 channels) will report raid5/raid6 offload capabilities. The remaining channels will only report ioat3.0 capabilities (memcpy). Signed-off-by: NTom Picard <tom.s.picard@intel.com> Signed-off-by: NDan Williams <dan.j.williams@intel.com>
-
- 02 9月, 2009 1 次提交
-
-
由 Benjamin Herrenschmidt 提交于
A misconfiguration by the firmware of the U4 PCIe bridge on PowerMac G5 with the U4 bridge (latest generations, may also affect the iMac G5 "iSight") is causing us to re-assign the PCI BARs of the video card, which can get it out of sync with the firmware, thus breaking offb. This works around it by fixing up the bridge configuration properly at boot time. It also fixes a bug where the firmware provides us with an incorrect set of accessible regions in the device-tree. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
- 30 8月, 2009 1 次提交
-
-
由 Matt Carlson 提交于
This patch adds a new device ID for those 5785 devices that will only use 10/100 phys. Signed-off-by: NMatt Carlson <mcarlson@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 13 8月, 2009 1 次提交
-
-
由 françois romieu 提交于
Synced with Realtek's 6.011.00 r8169 driver. Signed-off-by: NFrancois Romieu <romieu@fr.zoreil.com> Cc: Edward Hsu <edward_hsu@realtek.com.tw> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 01 7月, 2009 1 次提交
-
-
由 Michael Buesch 提交于
Add support for the PCI-Express NetMos 9901 Multi-IO card. 0001:06:00.0 Serial controller [0700]: NetMos Technology Device [9710:9901] (prog-if 02 [16550]) Subsystem: Device [a000:1000] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 65 Region 0: I/O ports at 0030 [size=8] Region 1: Memory at 80105000 (32-bit, non-prefetchable) [size=4K] Region 4: Memory at 80104000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: serial Kernel modules: 8250_pci 0001:06:00.1 Serial controller [0700]: NetMos Technology Device [9710:9901] (prog-if 02 [16550]) Subsystem: Device [a000:1000] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 65 Region 0: I/O ports at 0020 [size=8] Region 1: Memory at 80103000 (32-bit, non-prefetchable) [size=4K] Region 4: Memory at 80102000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: serial Kernel modules: 8250_pci 0001:06:00.2 Parallel controller [0701]: NetMos Technology Device [9710:9901] (prog-if 03 [IEEE1284]) Subsystem: Device [a000:2000] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin C routed to IRQ 65 Region 0: I/O ports at 0010 [size=8] Region 1: I/O ports at <unassigned> Region 2: Memory at 80101000 (32-bit, non-prefetchable) [size=4K] Region 4: Memory at 80100000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: parport_pc Kernel modules: parport_pc [ 16.760181] PCI parallel port detected: 416c:0100, I/O at 0x812010(0x0), IRQ 65 [ 16.760225] parport0: PC-style at 0x812010, irq 65 [PCSPP,TRISTATE,EPP] [ 16.851842] serial 0001:06:00.0: enabling device (0004 -> 0007) [ 16.883776] 0001:06:00.0: ttyS0 at I/O 0x812030 (irq = 65) is a ST16650V2 [ 16.893832] serial 0001:06:00.1: enabling device (0004 -> 0007) [ 16.926537] 0001:06:00.1: ttyS1 at I/O 0x812020 (irq = 65) is a ST16650V2 Signed-off-by: NMichael Buesch <mb@bu3sch.de> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 16 6月, 2009 1 次提交
-
-
由 Sarah Sharp 提交于
Add PCI initialization code to take control of the xHCI host controller away from the BIOS, halt, and reset the host controller. The xHCI spec says that BIOSes must give up the host controller within 5 seconds. Add some host controller glue functions to handle hardware initialization and memory allocation for the host controller. The current xHCI prototypes use PCI interrupts, but the xHCI spec requires MSI-X interrupts. Add code to support MSI-X interrupts, but use the PCI interrupts for now. Signed-off-by: NSarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 14 6月, 2009 1 次提交
-
-
由 Michał Mirosław 提交于
The code is divided in two parts. There is a virtual 'bus' driver that handles PCI device and registers three new devices one per card reader type. The other driver handles SD/MMC part of the reader. Signed-off-by: NMichał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: NPierre Ossman <pierre@ossman.eu>
-
- 11 6月, 2009 1 次提交
-
-
由 Andre Przywara 提交于
This adds support for the following serial controller chip: Oxford Semiconductor OXCB950 for PCI Cardbus interface http://www.transdimension.com/products/serial/OXCB950.html on this card: ExSys EX-1370 1 port high-speed serial card for ExpressCard/34 slot Signed-off-by: NAndre Przywara <andre.przywara@amd.com> Signed-off-by: NAlan Cox <alan@linux.intel.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 07 6月, 2009 1 次提交
-
-
由 Ayaz Abdulla 提交于
This patch removes the forcedeth device ids from pci_ids.h The forcedeth driver uses the device id constants directly in its source file. [ Need to keep PCI_DEVICE_ID_NVIDIA_NVENET_15 in order to keep drivers/pci/quirks.c building -DaveM ] Signed-off-by: NAyaz Abdulla <aabdulla@nvidia.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 25 5月, 2009 2 次提交
-
-
由 Andreas Eversberg 提交于
The new ID is validated by Cologne Chip. LEDs control is also supported. Signed-off-by: NAndreas Eversberg <andreas@eversberg.eu> Signed-off-by: NKarsten Keil <keil@b1-systems.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Andreas Eversberg 提交于
new id for HFC-8S Signed-off-by: NAndreas Eversberg <andreas@eversberg.eu> Signed-off-by: NKarsten Keil <keil@b1-systems.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 22 5月, 2009 1 次提交
-
-
由 Harald Welte 提交于
This patch adds the PCI Device ID 0xc409 to the PCI ID table of via82cxxx.c, as well as the 0x8409 south bridge ID. This is required to make the IDE driver work on the VX855/VX875 integrated chipset. Signed-off-by: NHarald Welte <HaraldWelte@viatech.com> Cc: Joseph Chan <JosephChan@via.com.tw> Cc: Bruce Chang <BruceChang@via.com.tw> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
- 19 5月, 2009 2 次提交
-
-
由 Kumar Gala 提交于
The P2020 is a dual e500v2 core based SOC with: * 3 PCIe controllers * 2 General purpose DMA controllers * 2 sRIO controllers * 3 eTSECS * USB 2.0 * SDHC * SPI, I2C, DUART * enhanced localbus * and optional Security (P2020E) security w/XOR acceleration The p2020 DS reference board is pretty similar to the existing MPC85xx DS boards and has a ULI 1575 connected on one of the PCIe controllers. Signed-off-by: NTed Peters <Ted.Peters@freescale.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Anton Vorontsov 提交于
This patch adds PCI IDs for MPC8569 and MPC8569E processors, plus adds appropriate quirks for these IDs, and thus makes PCI-E actually work on MPC8569E-MDS boards. Signed-off-by: NAnton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
- 14 5月, 2009 1 次提交
-
-
由 Takashi Iwai 提交于
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 23 4月, 2009 1 次提交
-
-
由 Bob Copeland 提交于
This adds support for the LEDs on the Jupiter netbook. Reported-by: NMartin Bammer <mrb74@gmx.at> Signed-off-by: NBob Copeland <me@bobcopeland.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 14 4月, 2009 2 次提交
-
-
由 Tim Blechmann 提交于
prototype of a driver for the digigram lx6464es 64 channel ethersound interface. Signed-off-by: NTim Blechmann <tim@klingt.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Stefan Husemann 提交于
Support the Intel 854 Chipset in fbdev. We test and use the patch on a Thomson IP1101 IPTV-Box. On the VGA-Port we get a normal signal. Here is the link to the Mambux-Project: http://www.mambux.de Cc: Keith Packard <keithp@keithp.com> Cc: Dave Airlie <airlied@linux.ie> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Signed-off-by: NStefan Husemann <shusemann@googlemail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-