提交 5f5bac82 编写于 作者: M Michał Mirosław 提交者: Pierre Ossman

mmc: Driver for CB710/720 memory card reader (MMC part)

The code is divided in two parts. There is a virtual 'bus' driver
that handles PCI device and registers three new devices one per card
reader type. The other driver handles SD/MMC part of the reader.
Signed-off-by: NMichał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: NPierre Ossman <pierre@ossman.eu>
上级 8385f9cb
......@@ -2105,6 +2105,15 @@ W: http://sourceforge.net/projects/lpfcxxxx
S: Supported
F: drivers/scsi/lpfc/
ENE CB710 FLASH CARD READER DRIVER
P: Michał Mirosław
M: mirq-linux@rere.qmqm.pl
L: linux-kernel@vger.kernel.org
S: Maintained
F: drivers/misc/cb710/
F: drivers/mmc/host/cb710-mmc.*
F: include/linux/cb710.h
EPSON 1355 FRAMEBUFFER DRIVER
P: Christopher Hoover
M: ch@murgatroid.com
......
......@@ -235,5 +235,6 @@ config ISL29003
source "drivers/misc/c2port/Kconfig"
source "drivers/misc/eeprom/Kconfig"
source "drivers/misc/cb710/Kconfig"
endif # MISC_DEVICES
......@@ -21,3 +21,4 @@ obj-$(CONFIG_HP_ILO) += hpilo.o
obj-$(CONFIG_ISL29003) += isl29003.o
obj-$(CONFIG_C2PORT) += c2port/
obj-y += eeprom/
obj-y += cb710/
config CB710_CORE
tristate "ENE CB710/720 Flash memory card reader support"
depends on PCI
help
This option enables support for PCI ENE CB710/720 Flash memory card
reader found in some laptops (ie. some versions of HP Compaq nx9500).
You will also have to select some flash card format drivers (MMC/SD,
MemoryStick).
This driver can also be built as a module. If so, the module
will be called cb710.
config CB710_DEBUG
bool "Enable driver debugging"
depends on CB710_CORE != n
default n
help
This is an option for use by developers; most people should
say N here. This adds a lot of debugging output to dmesg.
obj-$(CONFIG_CB710_CORE) += cb710.o
cb710-y := core.o sgbuf2.o
cb710-$(CONFIG_CB710_DEBUG) += debug.o
/*
* cb710/core.c
*
* Copyright by Michał Mirosław, 2008-2009
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/pci.h>
#include <linux/spinlock.h>
#include <linux/idr.h>
#include <linux/cb710.h>
static DEFINE_IDA(cb710_ida);
static DEFINE_SPINLOCK(cb710_ida_lock);
void cb710_pci_update_config_reg(struct pci_dev *pdev,
int reg, uint32_t mask, uint32_t xor)
{
u32 rval;
pci_read_config_dword(pdev, reg, &rval);
rval = (rval & mask) ^ xor;
pci_write_config_dword(pdev, reg, rval);
}
EXPORT_SYMBOL_GPL(cb710_pci_update_config_reg);
/* Some magic writes based on Windows driver init code */
static int __devinit cb710_pci_configure(struct pci_dev *pdev)
{
unsigned int devfn = PCI_DEVFN(PCI_SLOT(pdev->devfn), 0);
struct pci_dev *pdev0 = pci_get_slot(pdev->bus, devfn);
u32 val;
cb710_pci_update_config_reg(pdev, 0x48,
~0x000000FF, 0x0000003F);
pci_read_config_dword(pdev, 0x48, &val);
if (val & 0x80000000)
return 0;
if (!pdev0)
return -ENODEV;
if (pdev0->vendor == PCI_VENDOR_ID_ENE
&& pdev0->device == PCI_DEVICE_ID_ENE_720) {
cb710_pci_update_config_reg(pdev0, 0x8C,
~0x00F00000, 0x00100000);
cb710_pci_update_config_reg(pdev0, 0xB0,
~0x08000000, 0x08000000);
}
cb710_pci_update_config_reg(pdev0, 0x8C,
~0x00000F00, 0x00000200);
cb710_pci_update_config_reg(pdev0, 0x90,
~0x00060000, 0x00040000);
pci_dev_put(pdev0);
return 0;
}
static irqreturn_t cb710_irq_handler(int irq, void *data)
{
struct cb710_chip *chip = data;
struct cb710_slot *slot = &chip->slot[0];
irqreturn_t handled = IRQ_NONE;
unsigned nr;
spin_lock(&chip->irq_lock); /* incl. smp_rmb() */
for (nr = chip->slots; nr; ++slot, --nr) {
cb710_irq_handler_t handler_func = slot->irq_handler;
if (handler_func && handler_func(slot))
handled = IRQ_HANDLED;
}
spin_unlock(&chip->irq_lock);
return handled;
}
static void cb710_release_slot(struct device *dev)
{
#ifdef CONFIG_CB710_DEBUG_ASSUMPTIONS
struct cb710_slot *slot = cb710_pdev_to_slot(to_platform_device(dev));
struct cb710_chip *chip = cb710_slot_to_chip(slot);
/* slot struct can be freed now */
atomic_dec(&chip->slot_refs_count);
#endif
}
static int __devinit cb710_register_slot(struct cb710_chip *chip,
unsigned slot_mask, unsigned io_offset, const char *name)
{
int nr = chip->slots;
struct cb710_slot *slot = &chip->slot[nr];
int err;
dev_dbg(cb710_chip_dev(chip),
"register: %s.%d; slot %d; mask %d; IO offset: 0x%02X\n",
name, chip->platform_id, nr, slot_mask, io_offset);
/* slot->irq_handler == NULL here; this needs to be
* seen before platform_device_register() */
++chip->slots;
smp_wmb();
slot->iobase = chip->iobase + io_offset;
slot->pdev.name = name;
slot->pdev.id = chip->platform_id;
slot->pdev.dev.parent = &chip->pdev->dev;
slot->pdev.dev.release = cb710_release_slot;
err = platform_device_register(&slot->pdev);
#ifdef CONFIG_CB710_DEBUG_ASSUMPTIONS
atomic_inc(&chip->slot_refs_count);
#endif
if (err) {
/* device_initialize() called from platform_device_register()
* wants this on error path */
platform_device_put(&slot->pdev);
/* slot->irq_handler == NULL here anyway, so no lock needed */
--chip->slots;
return err;
}
chip->slot_mask |= slot_mask;
return 0;
}
static void cb710_unregister_slot(struct cb710_chip *chip,
unsigned slot_mask)
{
int nr = chip->slots - 1;
if (!(chip->slot_mask & slot_mask))
return;
platform_device_unregister(&chip->slot[nr].pdev);
/* complementary to spin_unlock() in cb710_set_irq_handler() */
smp_rmb();
BUG_ON(chip->slot[nr].irq_handler != NULL);
/* slot->irq_handler == NULL here, so no lock needed */
--chip->slots;
chip->slot_mask &= ~slot_mask;
}
void cb710_set_irq_handler(struct cb710_slot *slot,
cb710_irq_handler_t handler)
{
struct cb710_chip *chip = cb710_slot_to_chip(slot);
unsigned long flags;
spin_lock_irqsave(&chip->irq_lock, flags);
slot->irq_handler = handler;
spin_unlock_irqrestore(&chip->irq_lock, flags);
}
EXPORT_SYMBOL_GPL(cb710_set_irq_handler);
#ifdef CONFIG_PM
static int cb710_suspend(struct pci_dev *pdev, pm_message_t state)
{
struct cb710_chip *chip = pci_get_drvdata(pdev);
free_irq(pdev->irq, chip);
pci_save_state(pdev);
pci_disable_device(pdev);
if (state.event & PM_EVENT_SLEEP)
pci_set_power_state(pdev, PCI_D3cold);
return 0;
}
static int cb710_resume(struct pci_dev *pdev)
{
struct cb710_chip *chip = pci_get_drvdata(pdev);
int err;
pci_set_power_state(pdev, PCI_D0);
pci_restore_state(pdev);
err = pcim_enable_device(pdev);
if (err)
return err;
return devm_request_irq(&pdev->dev, pdev->irq,
cb710_irq_handler, IRQF_SHARED, KBUILD_MODNAME, chip);
}
#endif /* CONFIG_PM */
static int __devinit cb710_probe(struct pci_dev *pdev,
const struct pci_device_id *ent)
{
struct cb710_chip *chip;
unsigned long flags;
u32 val;
int err;
int n = 0;
err = cb710_pci_configure(pdev);
if (err)
return err;
/* this is actually magic... */
pci_read_config_dword(pdev, 0x48, &val);
if (!(val & 0x80000000)) {
pci_write_config_dword(pdev, 0x48, val|0x71000000);
pci_read_config_dword(pdev, 0x48, &val);
}
dev_dbg(&pdev->dev, "PCI config[0x48] = 0x%08X\n", val);
if (!(val & 0x70000000))
return -ENODEV;
val = (val >> 28) & 7;
if (val & CB710_SLOT_MMC)
++n;
if (val & CB710_SLOT_MS)
++n;
if (val & CB710_SLOT_SM)
++n;
chip = devm_kzalloc(&pdev->dev,
sizeof(*chip) + n * sizeof(*chip->slot), GFP_KERNEL);
if (!chip)
return -ENOMEM;
err = pcim_enable_device(pdev);
if (err)
return err;
err = pcim_iomap_regions(pdev, 0x0001, KBUILD_MODNAME);
if (err)
return err;
chip->pdev = pdev;
chip->iobase = pcim_iomap_table(pdev)[0];
pci_set_drvdata(pdev, chip);
err = devm_request_irq(&pdev->dev, pdev->irq,
cb710_irq_handler, IRQF_SHARED, KBUILD_MODNAME, chip);
if (err)
return err;
do {
if (!ida_pre_get(&cb710_ida, GFP_KERNEL))
return -ENOMEM;
spin_lock_irqsave(&cb710_ida_lock, flags);
err = ida_get_new(&cb710_ida, &chip->platform_id);
spin_unlock_irqrestore(&cb710_ida_lock, flags);
if (err && err != -EAGAIN)
return err;
} while (err);
dev_info(&pdev->dev, "id %d, IO 0x%p, IRQ %d\n",
chip->platform_id, chip->iobase, pdev->irq);
if (val & CB710_SLOT_MMC) { /* MMC/SD slot */
err = cb710_register_slot(chip,
CB710_SLOT_MMC, 0x00, "cb710-mmc");
if (err)
return err;
}
if (val & CB710_SLOT_MS) { /* MemoryStick slot */
err = cb710_register_slot(chip,
CB710_SLOT_MS, 0x40, "cb710-ms");
if (err)
goto unreg_mmc;
}
if (val & CB710_SLOT_SM) { /* SmartMedia slot */
err = cb710_register_slot(chip,
CB710_SLOT_SM, 0x60, "cb710-sm");
if (err)
goto unreg_ms;
}
return 0;
unreg_ms:
cb710_unregister_slot(chip, CB710_SLOT_MS);
unreg_mmc:
cb710_unregister_slot(chip, CB710_SLOT_MMC);
#ifdef CONFIG_CB710_DEBUG_ASSUMPTIONS
BUG_ON(atomic_read(&chip->slot_refs_count) != 0);
#endif
return err;
}
static void __devexit cb710_remove_one(struct pci_dev *pdev)
{
struct cb710_chip *chip = pci_get_drvdata(pdev);
unsigned long flags;
cb710_unregister_slot(chip, CB710_SLOT_SM);
cb710_unregister_slot(chip, CB710_SLOT_MS);
cb710_unregister_slot(chip, CB710_SLOT_MMC);
#ifdef CONFIG_CB710_DEBUG_ASSUMPTIONS
BUG_ON(atomic_read(&chip->slot_refs_count) != 0);
#endif
spin_lock_irqsave(&cb710_ida_lock, flags);
ida_remove(&cb710_ida, chip->platform_id);
spin_unlock_irqrestore(&cb710_ida_lock, flags);
}
static const struct pci_device_id cb710_pci_tbl[] = {
{ PCI_VENDOR_ID_ENE, PCI_DEVICE_ID_ENE_CB710_FLASH,
PCI_ANY_ID, PCI_ANY_ID, },
{ 0, }
};
static struct pci_driver cb710_driver = {
.name = KBUILD_MODNAME,
.id_table = cb710_pci_tbl,
.probe = cb710_probe,
.remove = __devexit_p(cb710_remove_one),
#ifdef CONFIG_PM
.suspend = cb710_suspend,
.resume = cb710_resume,
#endif
};
static int __init cb710_init_module(void)
{
return pci_register_driver(&cb710_driver);
}
static void __exit cb710_cleanup_module(void)
{
pci_unregister_driver(&cb710_driver);
ida_destroy(&cb710_ida);
}
module_init(cb710_init_module);
module_exit(cb710_cleanup_module);
MODULE_AUTHOR("Michał Mirosław <mirq-linux@rere.qmqm.pl>");
MODULE_DESCRIPTION("ENE CB710 memory card reader driver");
MODULE_LICENSE("GPL");
MODULE_DEVICE_TABLE(pci, cb710_pci_tbl);
/*
* cb710/debug.c
*
* Copyright by Michał Mirosław, 2008-2009
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/cb710.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/slab.h>
#define CB710_REG_COUNT 0x80
static const u16 allow[CB710_REG_COUNT/16] = {
0xFFF0, 0xFFFF, 0xFFFF, 0xFFFF,
0xFFF0, 0xFFFF, 0xFFFF, 0xFFFF,
};
static const char *const prefix[ARRAY_SIZE(allow)] = {
"MMC", "MMC", "MMC", "MMC",
"MS?", "MS?", "SM?", "SM?"
};
static inline int allow_reg_read(unsigned block, unsigned offset, unsigned bits)
{
unsigned mask = (1 << bits/8) - 1;
offset *= bits/8;
return ((allow[block] >> offset) & mask) == mask;
}
#define CB710_READ_REGS_TEMPLATE(t) \
static void cb710_read_regs_##t(void __iomem *iobase, \
u##t *reg, unsigned select) \
{ \
unsigned i, j; \
\
for (i = 0; i < ARRAY_SIZE(allow); ++i, reg += 16/(t/8)) { \
if (!select & (1 << i)) \
continue; \
\
for (j = 0; j < 0x10/(t/8); ++j) { \
if (!allow_reg_read(i, j, t)) \
continue; \
reg[j] = ioread##t(iobase \
+ (i << 4) + (j * (t/8))); \
} \
} \
}
static const char cb710_regf_8[] = "%02X";
static const char cb710_regf_16[] = "%04X";
static const char cb710_regf_32[] = "%08X";
static const char cb710_xes[] = "xxxxxxxx";
#define CB710_DUMP_REGS_TEMPLATE(t) \
static void cb710_dump_regs_##t(struct device *dev, \
const u##t *reg, unsigned select) \
{ \
const char *const xp = &cb710_xes[8 - t/4]; \
const char *const format = cb710_regf_##t; \
\
char msg[100], *p; \
unsigned i, j; \
\
for (i = 0; i < ARRAY_SIZE(allow); ++i, reg += 16/(t/8)) { \
if (!(select & (1 << i))) \
continue; \
p = msg; \
for (j = 0; j < 0x10/(t/8); ++j) { \
*p++ = ' '; \
if (j == 8/(t/8)) \
*p++ = ' '; \
if (allow_reg_read(i, j, t)) \
p += sprintf(p, format, reg[j]); \
else \
p += sprintf(p, "%s", xp); \
} \
dev_dbg(dev, "%s 0x%02X %s\n", prefix[i], i << 4, msg); \
} \
}
#define CB710_READ_AND_DUMP_REGS_TEMPLATE(t) \
static void cb710_read_and_dump_regs_##t(struct cb710_chip *chip, \
unsigned select) \
{ \
u##t regs[CB710_REG_COUNT/sizeof(u##t)]; \
\
memset(&regs, 0, sizeof(regs)); \
cb710_read_regs_##t(chip->iobase, regs, select); \
cb710_dump_regs_##t(cb710_chip_dev(chip), regs, select); \
}
#define CB710_REG_ACCESS_TEMPLATES(t) \
CB710_READ_REGS_TEMPLATE(t) \
CB710_DUMP_REGS_TEMPLATE(t) \
CB710_READ_AND_DUMP_REGS_TEMPLATE(t)
CB710_REG_ACCESS_TEMPLATES(8)
CB710_REG_ACCESS_TEMPLATES(16)
CB710_REG_ACCESS_TEMPLATES(32)
void cb710_dump_regs(struct cb710_chip *chip, unsigned select)
{
if (!(select & CB710_DUMP_REGS_MASK))
select = CB710_DUMP_REGS_ALL;
if (!(select & CB710_DUMP_ACCESS_MASK))
select |= CB710_DUMP_ACCESS_8;
if (select & CB710_DUMP_ACCESS_32)
cb710_read_and_dump_regs_32(chip, select);
if (select & CB710_DUMP_ACCESS_16)
cb710_read_and_dump_regs_16(chip, select);
if (select & CB710_DUMP_ACCESS_8)
cb710_read_and_dump_regs_8(chip, select);
}
EXPORT_SYMBOL_GPL(cb710_dump_regs);
/*
* cb710/sgbuf2.c
*
* Copyright by Michał Mirosław, 2008-2009
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/cb710.h>
static bool sg_dwiter_next(struct sg_mapping_iter *miter)
{
if (sg_miter_next(miter)) {
miter->consumed = 0;
return true;
} else
return false;
}
static bool sg_dwiter_is_at_end(struct sg_mapping_iter *miter)
{
return miter->length == miter->consumed && !sg_dwiter_next(miter);
}
static uint32_t sg_dwiter_read_buffer(struct sg_mapping_iter *miter)
{
size_t len, left = 4;
uint32_t data;
void *addr = &data;
do {
len = min(miter->length - miter->consumed, left);
memcpy(addr, miter->addr + miter->consumed, len);
miter->consumed += len;
left -= len;
if (!left)
return data;
addr += len;
} while (sg_dwiter_next(miter));
memset(addr, 0, left);
return data;
}
static inline bool needs_unaligned_copy(const void *ptr)
{
#ifdef HAVE_EFFICIENT_UNALIGNED_ACCESS
return false;
#else
return ((ptr - NULL) & 3) != 0;
#endif
}
static bool sg_dwiter_get_next_block(struct sg_mapping_iter *miter, uint32_t **ptr)
{
size_t len;
if (sg_dwiter_is_at_end(miter))
return true;
len = miter->length - miter->consumed;
if (likely(len >= 4 && !needs_unaligned_copy(
miter->addr + miter->consumed))) {
*ptr = miter->addr + miter->consumed;
miter->consumed += 4;
return true;
}
return false;
}
/**
* cb710_sg_dwiter_read_next_block() - get next 32-bit word from sg buffer
* @miter: sg mapping iterator used for reading
*
* Description:
* Returns 32-bit word starting at byte pointed to by @miter@
* handling any alignment issues. Bytes past the buffer's end
* are not accessed (read) but are returned as zeroes. @miter@
* is advanced by 4 bytes or to the end of buffer whichever is
* closer.
*
* Context:
* Same requirements as in sg_miter_next().
*
* Returns:
* 32-bit word just read.
*/
uint32_t cb710_sg_dwiter_read_next_block(struct sg_mapping_iter *miter)
{
uint32_t *ptr = NULL;
if (likely(sg_dwiter_get_next_block(miter, &ptr)))
return ptr ? *ptr : 0;
return sg_dwiter_read_buffer(miter);
}
EXPORT_SYMBOL_GPL(cb710_sg_dwiter_read_next_block);
static void sg_dwiter_write_slow(struct sg_mapping_iter *miter, uint32_t data)
{
size_t len, left = 4;
void *addr = &data;
do {
len = min(miter->length - miter->consumed, left);
memcpy(miter->addr, addr, len);
miter->consumed += len;
left -= len;
if (!left)
return;
addr += len;
flush_kernel_dcache_page(miter->page);
} while (sg_dwiter_next(miter));
}
/**
* cb710_sg_dwiter_write_next_block() - write next 32-bit word to sg buffer
* @miter: sg mapping iterator used for writing
*
* Description:
* Writes 32-bit word starting at byte pointed to by @miter@
* handling any alignment issues. Bytes which would be written
* past the buffer's end are silently discarded. @miter@ is
* advanced by 4 bytes or to the end of buffer whichever is closer.
*
* Context:
* Same requirements as in sg_miter_next().
*/
void cb710_sg_dwiter_write_next_block(struct sg_mapping_iter *miter, uint32_t data)
{
uint32_t *ptr = NULL;
if (likely(sg_dwiter_get_next_block(miter, &ptr))) {
if (ptr)
*ptr = data;
else
return;
} else
sg_dwiter_write_slow(miter, data);
if (miter->length == miter->consumed)
flush_kernel_dcache_page(miter->page);
}
EXPORT_SYMBOL_GPL(cb710_sg_dwiter_write_next_block);
......@@ -241,3 +241,16 @@ config MMC_TMIO
help
This provides support for the SD/MMC cell found in TC6393XB,
T7L66XB and also ipaq ASIC3
config MMC_CB710
tristate "ENE CB710 MMC/SD Interface support"
depends on PCI
select CB710_CORE
help
This option enables support for MMC/SD part of ENE CB710/720 Flash
memory card reader found in some laptops (ie. some versions of
HP Compaq nx9500).
This driver can also be built as a module. If so, the module
will be called cb710-mmc.
......@@ -29,4 +29,5 @@ endif
obj-$(CONFIG_MMC_S3C) += s3cmci.o
obj-$(CONFIG_MMC_SDRICOH_CS) += sdricoh_cs.o
obj-$(CONFIG_MMC_TMIO) += tmio_mmc.o
obj-$(CONFIG_MMC_CB710) += cb710-mmc.o
此差异已折叠。
/*
* cb710/cb710-mmc.h
*
* Copyright by Michał Mirosław, 2008-2009
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef LINUX_CB710_MMC_H
#define LINUX_CB710_MMC_H
#include <linux/cb710.h>
/* per-MMC-reader structure */
struct cb710_mmc_reader {
struct tasklet_struct finish_req_tasklet;
struct mmc_request *mrq;
spinlock_t irq_lock;
unsigned char last_power_mode;
};
/* some device struct walking */
static inline struct mmc_host *cb710_slot_to_mmc(struct cb710_slot *slot)
{
return dev_get_drvdata(&slot->pdev.dev);
}
static inline struct cb710_slot *cb710_mmc_to_slot(struct mmc_host *mmc)
{
struct platform_device *pdev = container_of(mmc_dev(mmc),
struct platform_device, dev);
return cb710_pdev_to_slot(pdev);
}
/* registers (this might be all wrong ;) */
#define CB710_MMC_DATA_PORT 0x00
#define CB710_MMC_CONFIG_PORT 0x04
#define CB710_MMC_CONFIG0_PORT 0x04
#define CB710_MMC_CONFIG1_PORT 0x05
#define CB710_MMC_C1_4BIT_DATA_BUS 0x40
#define CB710_MMC_CONFIG2_PORT 0x06
#define CB710_MMC_C2_READ_PIO_SIZE_MASK 0x0F /* N-1 */
#define CB710_MMC_CONFIG3_PORT 0x07
#define CB710_MMC_CONFIGB_PORT 0x08
#define CB710_MMC_IRQ_ENABLE_PORT 0x0C
#define CB710_MMC_IE_TEST_MASK 0x00BF
#define CB710_MMC_IE_CARD_INSERTION_STATUS 0x1000
#define CB710_MMC_IE_IRQ_ENABLE 0x8000
#define CB710_MMC_IE_CISTATUS_MASK \
(CB710_MMC_IE_CARD_INSERTION_STATUS|CB710_MMC_IE_IRQ_ENABLE)
#define CB710_MMC_STATUS_PORT 0x10
#define CB710_MMC_STATUS_ERROR_EVENTS 0x60FF
#define CB710_MMC_STATUS0_PORT 0x10
#define CB710_MMC_S0_FIFO_UNDERFLOW 0x40
#define CB710_MMC_STATUS1_PORT 0x11
#define CB710_MMC_S1_COMMAND_SENT 0x01
#define CB710_MMC_S1_DATA_TRANSFER_DONE 0x02
#define CB710_MMC_S1_PIO_TRANSFER_DONE 0x04
#define CB710_MMC_S1_CARD_CHANGED 0x10
#define CB710_MMC_S1_RESET 0x20
#define CB710_MMC_STATUS2_PORT 0x12
#define CB710_MMC_S2_FIFO_READY 0x01
#define CB710_MMC_S2_FIFO_EMPTY 0x02
#define CB710_MMC_S2_BUSY_10 0x10
#define CB710_MMC_S2_BUSY_20 0x20
#define CB710_MMC_STATUS3_PORT 0x13
#define CB710_MMC_S3_CARD_DETECTED 0x02
#define CB710_MMC_S3_WRITE_PROTECTED 0x04
#define CB710_MMC_CMD_TYPE_PORT 0x14
#define CB710_MMC_RSP_TYPE_MASK 0x0007
#define CB710_MMC_RSP_R1 (0)
#define CB710_MMC_RSP_136 (5)
#define CB710_MMC_RSP_NO_CRC (2)
#define CB710_MMC_RSP_PRESENT_MASK 0x0018
#define CB710_MMC_RSP_NONE (0 << 3)
#define CB710_MMC_RSP_PRESENT (1 << 3)
#define CB710_MMC_RSP_PRESENT_X (2 << 3)
#define CB710_MMC_CMD_TYPE_MASK 0x0060
#define CB710_MMC_CMD_BC (0 << 5)
#define CB710_MMC_CMD_BCR (1 << 5)
#define CB710_MMC_CMD_AC (2 << 5)
#define CB710_MMC_CMD_ADTC (3 << 5)
#define CB710_MMC_DATA_READ 0x0080
#define CB710_MMC_CMD_CODE_MASK 0x3F00
#define CB710_MMC_CMD_CODE_SHIFT 8
#define CB710_MMC_IS_APP_CMD 0x4000
#define CB710_MMC_RSP_BUSY 0x8000
#define CB710_MMC_CMD_PARAM_PORT 0x18
#define CB710_MMC_TRANSFER_SIZE_PORT 0x1C
#define CB710_MMC_RESPONSE0_PORT 0x20
#define CB710_MMC_RESPONSE1_PORT 0x24
#define CB710_MMC_RESPONSE2_PORT 0x28
#define CB710_MMC_RESPONSE3_PORT 0x2C
#endif /* LINUX_CB710_MMC_H */
/*
* cb710/cb710.h
*
* Copyright by Michał Mirosław, 2008-2009
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef LINUX_CB710_DRIVER_H
#define LINUX_CB710_DRIVER_H
#ifdef CONFIG_CB710_DEBUG
#define DEBUG
#endif
/* verify assumptions on platform_device framework */
#define CONFIG_CB710_DEBUG_ASSUMPTIONS
#include <linux/io.h>
#include <linux/interrupt.h>
#include <linux/spinlock.h>
#include <linux/pci.h>
#include <linux/platform_device.h>
#include <linux/mmc/host.h>
struct cb710_slot;
typedef int (*cb710_irq_handler_t)(struct cb710_slot *);
/* per-virtual-slot structure */
struct cb710_slot {
struct platform_device pdev;
void __iomem *iobase;
cb710_irq_handler_t irq_handler;
};
/* per-device structure */
struct cb710_chip {
struct pci_dev *pdev;
void __iomem *iobase;
unsigned platform_id;
#ifdef CONFIG_CB710_DEBUG_ASSUMPTIONS
atomic_t slot_refs_count;
#endif
unsigned slot_mask;
unsigned slots;
spinlock_t irq_lock;
struct cb710_slot slot[0];
};
/* NOTE: cb710_chip.slots is modified only during device init/exit and
* they are all serialized wrt themselves */
/* cb710_chip.slot_mask values */
#define CB710_SLOT_MMC 1
#define CB710_SLOT_MS 2
#define CB710_SLOT_SM 4
/* slot port accessors - so the logic is more clear in the code */
#define CB710_PORT_ACCESSORS(t) \
static inline void cb710_write_port_##t(struct cb710_slot *slot, \
unsigned port, u##t value) \
{ \
iowrite##t(value, slot->iobase + port); \
} \
\
static inline u##t cb710_read_port_##t(struct cb710_slot *slot, \
unsigned port) \
{ \
return ioread##t(slot->iobase + port); \
} \
\
static inline void cb710_modify_port_##t(struct cb710_slot *slot, \
unsigned port, u##t set, u##t clear) \
{ \
iowrite##t( \
(ioread##t(slot->iobase + port) & ~clear)|set, \
slot->iobase + port); \
}
CB710_PORT_ACCESSORS(8)
CB710_PORT_ACCESSORS(16)
CB710_PORT_ACCESSORS(32)
void cb710_pci_update_config_reg(struct pci_dev *pdev,
int reg, uint32_t and, uint32_t xor);
void cb710_set_irq_handler(struct cb710_slot *slot,
cb710_irq_handler_t handler);
/* some device struct walking */
static inline struct cb710_slot *cb710_pdev_to_slot(
struct platform_device *pdev)
{
return container_of(pdev, struct cb710_slot, pdev);
}
static inline struct cb710_chip *cb710_slot_to_chip(struct cb710_slot *slot)
{
return dev_get_drvdata(slot->pdev.dev.parent);
}
static inline struct device *cb710_slot_dev(struct cb710_slot *slot)
{
return &slot->pdev.dev;
}
static inline struct device *cb710_chip_dev(struct cb710_chip *chip)
{
return &chip->pdev->dev;
}
/* debugging aids */
#ifdef CONFIG_CB710_DEBUG
void cb710_dump_regs(struct cb710_chip *chip, unsigned dump);
#else
#define cb710_dump_regs(c, d) do {} while (0)
#endif
#define CB710_DUMP_REGS_MMC 0x0F
#define CB710_DUMP_REGS_MS 0x30
#define CB710_DUMP_REGS_SM 0xC0
#define CB710_DUMP_REGS_ALL 0xFF
#define CB710_DUMP_REGS_MASK 0xFF
#define CB710_DUMP_ACCESS_8 0x100
#define CB710_DUMP_ACCESS_16 0x200
#define CB710_DUMP_ACCESS_32 0x400
#define CB710_DUMP_ACCESS_ALL 0x700
#define CB710_DUMP_ACCESS_MASK 0x700
#endif /* LINUX_CB710_DRIVER_H */
/*
* cb710/sgbuf2.h
*
* Copyright by Michał Mirosław, 2008-2009
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef LINUX_CB710_SG_H
#define LINUX_CB710_SG_H
#include <linux/highmem.h>
#include <linux/scatterlist.h>
/**
* cb710_sg_miter_stop_writing - stop mapping iteration after writing
* @miter: sg mapping iter to be stopped
*
* Description:
* Stops mapping iterator @miter. @miter should have been started
* started using sg_miter_start(). A stopped iteration can be
* resumed by calling sg_miter_next() on it. This is useful when
* resources (kmap) need to be released during iteration.
*
* This is a convenience wrapper that will be optimized out for arches
* that don't need flush_kernel_dcache_page().
*
* Context:
* IRQ disabled if the SG_MITER_ATOMIC is set. Don't care otherwise.
*/
static inline void cb710_sg_miter_stop_writing(struct sg_mapping_iter *miter)
{
if (miter->page)
flush_kernel_dcache_page(miter->page);
sg_miter_stop(miter);
}
/*
* 32-bit PIO mapping sg iterator
*
* Hides scatterlist access issues - fragment boundaries, alignment, page
* mapping - for drivers using 32-bit-word-at-a-time-PIO (ie. PCI devices
* without DMA support).
*
* Best-case reading (transfer from device):
* sg_miter_start();
* cb710_sg_dwiter_write_from_io();
* cb710_sg_miter_stop_writing();
*
* Best-case writing (transfer to device):
* sg_miter_start();
* cb710_sg_dwiter_read_to_io();
* sg_miter_stop();
*/
uint32_t cb710_sg_dwiter_read_next_block(struct sg_mapping_iter *miter);
void cb710_sg_dwiter_write_next_block(struct sg_mapping_iter *miter, uint32_t data);
/**
* cb710_sg_dwiter_write_from_io - transfer data to mapped buffer from 32-bit IO port
* @miter: sg mapping iter
* @port: PIO port - IO or MMIO address
* @count: number of 32-bit words to transfer
*
* Description:
* Reads @count 32-bit words from register @port and stores it in
* buffer iterated by @miter. Data that would overflow the buffer
* is silently ignored. Iterator is advanced by 4*@count bytes
* or to the buffer's end whichever is closer.
*
* Context:
* IRQ disabled if the SG_MITER_ATOMIC is set. Don't care otherwise.
*/
static inline void cb710_sg_dwiter_write_from_io(struct sg_mapping_iter *miter,
void __iomem *port, size_t count)
{
while (count-- > 0)
cb710_sg_dwiter_write_next_block(miter, ioread32(port));
}
/**
* cb710_sg_dwiter_read_to_io - transfer data to 32-bit IO port from mapped buffer
* @miter: sg mapping iter
* @port: PIO port - IO or MMIO address
* @count: number of 32-bit words to transfer
*
* Description:
* Writes @count 32-bit words to register @port from buffer iterated
* through @miter. If buffer ends before @count words are written
* missing data is replaced by zeroes. @miter is advanced by 4*@count
* bytes or to the buffer's end whichever is closer.
*
* Context:
* IRQ disabled if the SG_MITER_ATOMIC is set. Don't care otherwise.
*/
static inline void cb710_sg_dwiter_read_to_io(struct sg_mapping_iter *miter,
void __iomem *port, size_t count)
{
while (count-- > 0)
iowrite32(cb710_sg_dwiter_read_next_block(miter), port);
}
#endif /* LINUX_CB710_SG_H */
......@@ -2127,6 +2127,7 @@
#define PCI_VENDOR_ID_MAINPINE 0x1522
#define PCI_DEVICE_ID_MAINPINE_PBRIDGE 0x0100
#define PCI_VENDOR_ID_ENE 0x1524
#define PCI_DEVICE_ID_ENE_CB710_FLASH 0x0510
#define PCI_DEVICE_ID_ENE_CB712_SD 0x0550
#define PCI_DEVICE_ID_ENE_CB712_SD_2 0x0551
#define PCI_DEVICE_ID_ENE_CB714_SD 0x0750
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册