Add pre_enable() and post_disable() for cqhci_host_ops.
Add hook functions before cqhci enable and
after cqhci disable for platforms need them.
Signed-off-by: NChun-Hung Wu <chun-hung.wu@mediatek.com>
Acked-by: NAdrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/1598520783-25250-2-git-send-email-chun-hung.wu@mediatek.comSigned-off-by: NUlf Hansson <ulf.hansson@linaro.org>

On sc7180 target, issues are observed with HS400 mode due to a
hardware limitation. If sdcc clock is dynamically gated and ungated,
the very next command is failing with command CRC/timeout errors.

To mitigate this issue, DLL phase has to be restored whenever sdcc
clock is gated dynamically. The restore_dll_config ensures this.
Enabling this flag with this change. And simply re-using the sdm845
target configuration for this flag.
Signed-off-by: NVeerabhadrarao Badiganti <vbadigan@codeaurora.org>
Reviewed-by: NDouglas Anderson <dianders@chromium.org>
Tested-by: NDouglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/1598541694-15694-1-git-send-email-vbadigan@codeaurora.orgSigned-off-by: NUlf Hansson <ulf.hansson@linaro.org>

After all the previous refactorization, we can now populate mmc_ops
directly and don't need a layer inbetween. The NULL-pointer check and
the error printout are already done by the MMC core.
Signed-off-by: NWolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: NYoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Tested-by: NYoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/20200820132538.24758-7-wsa+renesas@sang-engineering.comSigned-off-by: NUlf Hansson <ulf.hansson@linaro.org>

SDHI needs to reset the SCC only, not the whole IP core. So, if tuning
fails, don't handle specifics in the generic TMIO core, but in the
specific drivers. For SDHI, we need to move around the reset routine a
bit. It is not modified.
Signed-off-by: NWolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: NYoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Tested-by: NYoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/20200820132538.24758-6-wsa+renesas@sang-engineering.comSigned-off-by: NUlf Hansson <ulf.hansson@linaro.org>

Some TMIO variants need specific actions in their reset routine, but
they are all based on a generic reset routine. So, the optional 'reset'
callback will now only take care of the additional stuff and we will
have a generic function around it. Less code, easier to maintain, and
much more readable. Code in tmio_mmc.c is untested but in my TC6387XB
datasheet the SDIO part is reset independently from the SD part, too.
Signed-off-by: NWolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: NYoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Tested-by: NYoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/20200820132538.24758-5-wsa+renesas@sang-engineering.comSigned-off-by: NUlf Hansson <ulf.hansson@linaro.org>

After Yamada-san's refactorization introducing 'tmio_mmc_host_alloc', we
can populate mmc_ops directly and don't need a layer inbetween.
Signed-off-by: NWolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: NYoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Tested-by: NYoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/20200820132538.24758-4-wsa+renesas@sang-engineering.comSigned-off-by: NUlf Hansson <ulf.hansson@linaro.org>

This reverts commit a87852c6. It did fix
the issue, but was building on top of already wrong assumptions. The
driver missed that 'hw_reset' was only for resetting remote HW (card)
and not for the IP core. Since we fixed that in a previous patch, we can
now remove this patch to make it clear that 'reset' is for resetting the
IP core only. Also, cancelling DMA will only be called when actually
needed again. It will also allow for further cleanups and better
readability. Note that in addition to the revert, the call in
'tmio_mmc_execute_tuning' will be converted, too, to maintain the
current behaviour.
Signed-off-by: NWolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: NYoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Tested-by: NYoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/20200820132538.24758-3-wsa+renesas@sang-engineering.comSigned-off-by: NUlf Hansson <ulf.hansson@linaro.org>

This driver got the usage of 'hw_reset' wrong and missed that it is used
to reset the remote HW (card) only, not the local one (controller). Move
everything to the proper 'reset' callback. Also, add the generic reset
code from TMIO, so we will ensure the same behaviour (it will get
refactored away in a later patch). This also means we need to drop
MMC_CAP_HW_RESET because this is currently not supported by our
hardware.
Signed-off-by: NWolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: NYoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Tested-by: NYoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/20200820132538.24758-2-wsa+renesas@sang-engineering.comSigned-off-by: NUlf Hansson <ulf.hansson@linaro.org>

There is a one time delay because of a card detect debounce timer in the
controller IP. This timer runs as soon as power is applied to the module
regardless of whether a card is present or not and any writes to
SDHCI_POWER_ON will return 0 before it expires. This timeout has been
measured to be about 1 second in am654x and j721e.

Write-and-read-back in a loop on SDHCI_POWER_ON for a maximum of
1.5 seconds to make sure that the controller actually powers on.
Signed-off-by: NFaiz Abbas <faiz_abbas@ti.com>
Link: https://lore.kernel.org/r/20200825170015.32285-1-faiz_abbas@ti.comSigned-off-by: NUlf Hansson <ulf.hansson@linaro.org>

There seems to be no particular reason to only test for ARM, so allow
for build-testing on other platforms to increase coverage.

Build-tested on x86 with allyesconfig.
Signed-off-by: NAlex Dewar <alex.dewar90@gmail.com>
Link: https://lore.kernel.org/r/20200824171854.406157-1-alex.dewar90@gmail.comSigned-off-by: NUlf Hansson <ulf.hansson@linaro.org>

Value assigned to a variable(err) is never used, so remove it.
Signed-off-by: NHaibo Chen <haibo.chen@nxp.com>
Acked-by: NAdrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/1598265914-23606-1-git-send-email-haibo.chen@nxp.comSigned-off-by: NUlf Hansson <ulf.hansson@linaro.org>

Use kobj_to_dev() instead of container_of()
Signed-off-by: NTian Tao <tiantao6@hisilicon.com>
Link: https://lore.kernel.org/r/1598230956-58523-1-git-send-email-tiantao6@hisilicon.comSigned-off-by: NUlf Hansson <ulf.hansson@linaro.org>

This adds the eMMC driver for the Sparx5 SoC. It is based upon the
designware IP, but requires some extra initialization and quirks.
Signed-off-by: NLars Povlsen <lars.povlsen@microchip.com>
Acked-by: NAdrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20200825081357.32354-3-lars.povlsen@microchip.comSigned-off-by: NUlf Hansson <ulf.hansson@linaro.org>

The Sparx5 SDHCI controller is based on the Designware controller IP.
Signed-off-by: NLars Povlsen <lars.povlsen@microchip.com>
Link: https://lore.kernel.org/r/20200825081357.32354-2-lars.povlsen@microchip.com
Link: https://lore.kernel.org/r/20200826130106.22889-1-lars.povlsen@microchip.comSigned-off-by: NUlf Hansson <ulf.hansson@linaro.org>

via_save_pcictrlreg() should be called with host->lock held
as it writes to pm_pcictrl_reg, otherwise there can be a race
condition between via_sd_suspend() and via_sdc_card_detect().
The same pattern is used in the function via_reset_pcictrl()
as well, where via_save_pcictrlreg() is called with host->lock
held.

Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: NMadhuparna Bhowmik <madhuparnabhowmik10@gmail.com>
Link: https://lore.kernel.org/r/20200822061528.7035-1-madhuparnabhowmik10@gmail.comSigned-off-by: NUlf Hansson <ulf.hansson@linaro.org>

MMC_CAP_HW_RESET means that the controller is capable of resetting the eMMC
device via RST_n signal, not a reset of the controller. Two drivers got
this wrong, so let's make it more clear.
Signed-off-by: NWolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20200821063533.3771-1-wsa+renesas@sang-engineering.comSigned-off-by: NUlf Hansson <ulf.hansson@linaro.org>

Some Intel BYT based host controllers support the setting of latency
tolerance.  Accordingly, implement the PM QoS ->set_latency_tolerance()
callback.  The raw register values are also exposed via debugfs.

Intel EHL controllers require this support.
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Fixes: cb3a7d4a ("mmc: sdhci-pci: Add support for Intel EHL")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200818104508.7149-1-adrian.hunter@intel.comSigned-off-by: NUlf Hansson <ulf.hansson@linaro.org>

When reading the test description, I thought a correction of the
xfer_size was tested, which is not the case. It is tested that the
xfer_size is correct. Use 'proper xfer_size' to remove this ambiguity.
Signed-off-by: NWolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: NNiklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://lore.kernel.org/r/20200817115838.2981-1-wsa@kernel.orgSigned-off-by: NUlf Hansson <ulf.hansson@linaro.org>

Previously the cycle timeout was converted to a microsecond value but
then incorrectly treated as a nanosecond timeout. This patch changes
the code to convert both the nanosecond timeout and the cycle timeout
to a microsecond value and use that directly.
Signed-off-by: NTobias Schramm <t.schramm@manjaro.org>
Link: https://lore.kernel.org/r/20200814185011.3252020-1-t.schramm@manjaro.orgSigned-off-by: NUlf Hansson <ulf.hansson@linaro.org>

For SDIO functions, SDIO cards and SD COMBO cards are exported revision
number and info strings from CISTPL_VERS_1 structure. Revision number
should indicate compliance of standard and info strings should contain
product information in same format as product information for PCMCIA cards.

Product information for PCMCIA cards should contain following strings in
this order: Manufacturer, Product Name, Lot number, Programming Conditions.

Note that not all SDIO cards export all those info strings in that order as
described in PCMCIA Metaformat Specification.
Signed-off-by: NPali Rohár <pali@kernel.org>
Link: https://lore.kernel.org/r/20200727133837.19086-5-pali@kernel.orgSigned-off-by: NUlf Hansson <ulf.hansson@linaro.org>

This simplify code for generating sdio config attributes and allows easily
define new sdio attributes.
Signed-off-by: NPali Rohár <pali@kernel.org>
Link: https://lore.kernel.org/r/20200727133837.19086-4-pali@kernel.orgSigned-off-by: NUlf Hansson <ulf.hansson@linaro.org>

They should indicate compliance of standard.
Signed-off-by: NPali Rohár <pali@kernel.org>
Link: https://lore.kernel.org/r/20200727133837.19086-3-pali@kernel.orgSigned-off-by: NUlf Hansson <ulf.hansson@linaro.org>

Before parsing CISTPL_VERS_1 structure check that its size is at least two
bytes to prevent buffer overflow.
Signed-off-by: NPali Rohár <pali@kernel.org>
Link: https://lore.kernel.org/r/20200727133837.19086-2-pali@kernel.orgSigned-off-by: NUlf Hansson <ulf.hansson@linaro.org>

According to IC suggestion, everytime before sending the tuning command,
need to reset the usdhc, so to reset the tuning circuit, to let every
tuning command work well for the manual tuning method. For standard tuning
method, IC already add the reset operation in the hardware logic.
Signed-off-by: NHaibo Chen <haibo.chen@nxp.com>
Acked-by: NAdrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/1597135057-22272-1-git-send-email-haibo.chen@nxp.comSigned-off-by: NUlf Hansson <ulf.hansson@linaro.org>

There is a spelling mistake in a debug message. Fix it.
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20200810080247.47024-1-colin.king@canonical.comSigned-off-by: NUlf Hansson <ulf.hansson@linaro.org>

Document SDHI controller for RZ/G2H (R8A774E1) SoC, which is compatible
with R-Car Gen3 SoC family.
Signed-off-by: NLad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: NMarian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com>
Reviewed-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Acked-by: NRob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20200809192001.19156-1-prabhakar.mahadev-lad.rj@bp.renesas.comSigned-off-by: NUlf Hansson <ulf.hansson@linaro.org>

Synopsys DesignWare MMC controller could be used in RISC-V and
C-SKY architectures.
Signed-off-by: NGuo Ren <guoren@linux.alibaba.com>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/1596887102-9743-1-git-send-email-guoren@kernel.orgSigned-off-by: NUlf Hansson <ulf.hansson@linaro.org>

Remove empty comment to fix W=1 compile warning:

    drivers/mmc/host/s3cmci.c:400: warning: Cannot understand  *
     on line 400 - I thought it was a doc line
Signed-off-by: NKrzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200804151345.28005-1-krzk@kernel.orgSigned-off-by: NUlf Hansson <ulf.hansson@linaro.org>

Add binding documentation for mmc host controllers present on
TI's J7200 SOC
Signed-off-by: NFaiz Abbas <faiz_abbas@ti.com>
Acked-by: NRob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20200802070114.9624-1-faiz_abbas@ti.comSigned-off-by: NUlf Hansson <ulf.hansson@linaro.org>

Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.

Deterministic algorithm:
For each file:
  If not .svg:
    For each line:
      If doesn't contain `\bxmlns\b`:
        For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
	  If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
            If both the HTTP and HTTPS versions
            return 200 OK and serve the same content:
              Replace HTTP with HTTPS.
Signed-off-by: NAlexander A. Klimov <grandmaster@al2klimov.de>
Acked-by: NAdrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20200718090614.88946-1-grandmaster@al2klimov.deSigned-off-by: NUlf Hansson <ulf.hansson@linaro.org>

Pull more io_uring fixes from Jens Axboe:
 "Two followup fixes. One is fixing a regression from this merge window,
  the other is two commits fixing cancelation of deferred requests.

  Both have gone through full testing, and both spawned a few new
  regression test additions to liburing.

   - Don't play games with const, properly store the output iovec and
     assign it as needed.

   - Deferred request cancelation fix (Pavel)"

* tag 'io_uring-5.9-2020-09-06' of git://git.kernel.dk/linux-block:
  io_uring: fix linked deferred ->files cancellation
  io_uring: fix cancel of deferred reqs with ->files
  io_uring: fix explicit async read/write mapping for large segments

Pull iommu fixes from Joerg Roedel:

 - three Intel VT-d fixes to fix address handling on 32bit, fix a NULL
   pointer dereference bug and serialize a hardware register access as
   required by the VT-d spec.

 - two patches for AMD IOMMU to force AMD GPUs into translation mode
   when memory encryption is active and disallow using IOMMUv2
   functionality.  This makes the AMDGPU driver work when memory
   encryption is active.

 - two more fixes for AMD IOMMU to fix updating the Interrupt Remapping
   Table Entries.

 - MAINTAINERS file update for the Qualcom IOMMU driver.

* tag 'iommu-fixes-v5.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
  iommu/vt-d: Handle 36bit addressing for x86-32
  iommu/amd: Do not use IOMMUv2 functionality when SME is active
  iommu/amd: Do not force direct mapping when SME is active
  iommu/amd: Use cmpxchg_double() when updating 128-bit IRTE
  iommu/amd: Restore IRTE.RemapEn bit after programming IRTE
  iommu/vt-d: Fix NULL pointer dereference in dev_iommu_priv_set()
  iommu/vt-d: Serialize IOMMU GCMD register modifications
  MAINTAINERS: Update QUALCOMM IOMMU after Arm SMMU drivers move

Pull x86 fixes from Ingo Molnar:

 - more generic entry code ABI fallout

 - debug register handling bugfixes

 - fix vmalloc mappings on 32-bit kernels

 - kprobes instrumentation output fix on 32-bit kernels

 - fix over-eager WARN_ON_ONCE() on !SMAP hardware

 - NUMA debugging fix

 - fix Clang related crash on !RETPOLINE kernels

* tag 'x86-urgent-2020-09-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/entry: Unbreak 32bit fast syscall
  x86/debug: Allow a single level of #DB recursion
  x86/entry: Fix AC assertion
  tracing/kprobes, x86/ptrace: Fix regs argument order for i386
  x86, fakenuma: Fix invalid starting node ID
  x86/mm/32: Bring back vmalloc faulting on x86_32
  x86/cmdline: Disable jump tables for cmdline.c

Pull xen updates from Juergen Gross:
 "A small series for fixing a problem with Xen PVH guests when running
  as backends (e.g. as dom0).

  Mapping other guests' memory is now working via ZONE_DEVICE, thus not
  requiring to abuse the memory hotplug functionality for that purpose"

* tag 'for-linus-5.9-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  xen: add helpers to allocate unpopulated memory
  memremap: rename MEMORY_DEVICE_DEVDAX to MEMORY_DEVICE_GENERIC
  xen/balloon: add header guard

While looking for ->files in ->defer_list, consider that requests there
may actually be links.
Signed-off-by: NPavel Begunkov <asml.silence@gmail.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

While trying to cancel requests with ->files, it also should look for
requests in ->defer_list, otherwise it might end up hanging a thread.

Cancel all requests in ->defer_list up to the last request there with
matching ->files, that's needed to follow drain ordering semantics.
Signed-off-by: NPavel Begunkov <asml.silence@gmail.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Merge tags 'auxdisplay-for-linus-v5.9-rc4', 'clang-format-for-linus-v5.9-rc4' and 'compiler-attributes-for-linus-v5.9-rc4' of git://github.com/ojeda/linux

Pull misc fixes from Miguel Ojeda:
 "A trivial patch for auxdisplay:

   - Replace HTTP links with HTTPS ones (Alexander A. Klimov)

  The usual clang-format trivial update:

   - Update with the latest for_each macro list (Miguel Ojeda)

  And Luc requested me to pick a sparse fix on my queue, so here it goes
  along with other two trivial Compiler Attributes ones (also from Luc).

   - sparse: use static inline for __chk_{user,io}_ptr() (Luc Van
     Oostenryck)

   - Compiler Attributes: fix comment concerning GCC 4.6 (Luc Van
     Oostenryck)

   - Compiler Attributes: remove comment about sparse not supporting
     __has_attribute (Luc Van Oostenryck)"

* tag 'auxdisplay-for-linus-v5.9-rc4' of git://github.com/ojeda/linux:
  auxdisplay: Replace HTTP links with HTTPS ones

* tag 'clang-format-for-linus-v5.9-rc4' of git://github.com/ojeda/linux:
  clang-format: Update with the latest for_each macro list

* tag 'compiler-attributes-for-linus-v5.9-rc4' of git://github.com/ojeda/linux:
  sparse: use static inline for __chk_{user,io}_ptr()
  Compiler Attributes: fix comment concerning GCC 4.6
  Compiler Attributes: remove comment about sparse not supporting __has_attribute

Pull ARC fixes from Vineet Gupta:

 - HSDK-4xd Dev system: perf driver updates for sampling interrupt

 - HSDK* Dev System: Ethernet broken [Evgeniy Didin]

 - HIGHMEM broken (2 memory banks) [Mike Rapoport]

 - show_regs() rewrite once and for all

 - Other minor fixes

* tag 'arc-5.9-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
  ARC: [plat-hsdk]: Switch ethernet phy-mode to rgmii-id
  arc: fix memory initialization for systems with two memory banks
  irqchip/eznps: Fix build error for !ARC700 builds
  ARC: show_regs: fix r12 printing and simplify
  ARC: HSDK: wireup perf irq
  ARC: perf: don't bail setup if pct irq missing in device-tree
  ARC: pgalloc.h: delete a duplicated word + other fixes

Merge misc fixes from Andrew Morton:
 "19 patches.

  Subsystems affected by this patch series: MAINTAINERS, ipc, fork,
  checkpatch, lib, and mm (memcg, slub, pagemap, madvise, migration,
  hugetlb)"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  include/linux/log2.h: add missing () around n in roundup_pow_of_two()
  mm/khugepaged.c: fix khugepaged's request size in collapse_file
  mm/hugetlb: fix a race between hugetlb sysctl handlers
  mm/hugetlb: try preferred node first when alloc gigantic page from cma
  mm/migrate: preserve soft dirty in remove_migration_pte()
  mm/migrate: remove unnecessary is_zone_device_page() check
  mm/rmap: fixup copying of soft dirty and uffd ptes
  mm/migrate: fixup setting UFFD_WP flag
  mm: madvise: fix vma user-after-free
  checkpatch: fix the usage of capture group ( ... )
  fork: adjust sysctl_max_threads definition to match prototype
  ipc: adjust proc_ipc_sem_dointvec definition to match prototype
  mm: track page table modifications in __apply_to_page_range()
  MAINTAINERS: IA64: mark Status as Odd Fixes only
  MAINTAINERS: add LLVM maintainers
  MAINTAINERS: update Cavium/Marvell entries
  mm: slub: fix conversion of freelist_corrupted()
  mm: memcg: fix memcg reclaim soft lockup
  memcg: fix use-after-free in uncharge_batch